4.5 meter high wind esa - satcom services...ngc-pk5pf motor kit azimuth/elevation motor kit...
TRANSCRIPT
earth stations
h
Communications tV Power hu /nsines
asc signal division
ascSignal
4.5 Meter High Wind ESALike all ASC Signal earth station antennas, the 4.5 Meter high windEarth Station Antenna provides high gain and exceptional patterncharacteristics.
Thisantenna system isdesigned toaddress the stringent requirementsof both the television broadcast industry and telecommunicationsnetwork operators who demand unsurpassed flexibility and electricalperformance in high-quality, cost-effective, and reliable packages.
The electrical performance and exceptional versatility provides theability to configure the antenna in C-, X- and Ku-bands with theproper selection of feed and combiner systems. That versatility isprovided at the time of initial purchase, as well as in the future, asyour satellite communication requirements evolve.
This antenna system is used worldwide in broadcast applicationsand high density data, voice and communications networks. TheASC Signal 4.5 meter high wind earth station antenna features acomputer-optimized prime focus optics system and close-tolerancemanufacturing techniques.
This combination provides extremely accurate surface contourresulting in exceptionally high gain and closely controlled patterncharacteristics. ASC Signal earth station antennas provide maximumdurability with minimal maintenance.
>
-
Features• Self-aligning main reflector requires no field alignment
• Prime focus feed system optics and fully-shapedparabolic main reflector provide excellent patterncharacteristics
• 3 year warranty on all structural components
• C, X, Ku Band Capabilities
• Deep equipment enclosure for hub mount electronics
• High wind capabilities
1
PBESA45MHW.CAll designs, specifications, and availabilities ofproducts and services presented in this bulletinare subject to change without notice. (1016A)
© 2016 CPI ASC Signal Division
earth stations
CVmnumirutunis tV Power Intitis/ries
asc signal division
asCSigna
4.5 Meter High Wind ESADesign Standards
Reflector Aluminum painted with highly diffusive whitepaint
Ground Mount Hot-dipped galvanized steel, per ASTM-A123for structural steel.
Hardware Sizes < 3/8 in (9.5mm), stainless steel,passivated per MIL-F-14072-E300Sizes > 3/8 in (9.5mm), hot-dipped galvanizedstainless steel, passivated per ASTM-A123
Environmental Performances
Operating Temperature -40°to 52°C (-40° to 125°F)
Seismic (Earthquake) 1 G Vertical and Horizontal acceleration.Equivalent to a Richter Magnitude 8.3, andGrade 11 on the modified Mercalli Scale
Operational Winds 100 mph (160 km/h) with gain degradationSurvival Winds 150 mph (240 km/h) in any stationary position
of operation
Rain 4 in (102 mm) per hour
Solar Radiation 360 BTU/hr/ft2 (1135 Watts/m2>
Relative Humidity 100%
Shock and Vibration As encountered by commercial Air, Rail andTruck shipment.
Atmospheric Conditions As encountered by Moderately CorrosiveCoastal and Industrial Areas.
Mechanical PerformancesThe 4.5m Antenna mechanical general specifications and performances arelisted in below table. Additional information, dimensions and layout may beprovided by ASC Signal on a case-by-case basis.
Optics Type Prime FocusReflector Material Precision-Formed AluminumReflector Segments 6Mount Type Az over El Tripod Mount
Antenna Pointing Range, Coarse/(Continuous)Elevation: 5-90° (85°)Azimuth: 180° (120°)Polarization 180° (180°)
Hub/Enclosure DimensionsDiameter 1.32 m (52 in)Depth 1.17 m (46 in)
Shipping InformationPacking OptionsStandard Commercial Domestic Pack IncludedOcean Export Pack - For non-containerized,packed for seal against salt water spray
OCEANSHP-MD
Air Export Pack - For freighter aircraft shipments.Lower deck AirPack requires specialized bids
AIR EXPORT PACK-MD
Container Packaging CNTPCK-MD
I Required Shipping ContainerStandard 20 ft land/sea container Quantity 1
Shipping container information is given for basic configuration and may vary depending on theselected options, please contact ASC Signal for specific container loading plan.
2
PBESA45MHW.CAll designs, specifications, and availabilities ofproducts and services presented in this bulletinare subject to change without notice. (1016A)
© 2016 CPI ASC Signal Division
t'ommunicalions tV rower Ituiitsihc
asc signal division
asCSigna
4.5 Meter High Wind ESAearth stations
Dimensional DrawingsRodius= 11.74 ft [3.6m]
1.84 ft [0.6m]
A = Lower Rim HeightB = Vertex Center HeightC = Feed Center HeightD = Upper Rim HeightE = Rim ExtensionEL = Elevation Angle
1.52 ft [0.5m]
/
//
/
//
//
J
B/C
[1.5m]4.91 f t A
2.27 ft [0.7m]
E-7.33 ft [2.2m]
11.06 ft [3.4m]
17.53 ft [5.3m
5.75 ft [1.8m]
//
//
/
//
/
\\\
\\
ss.
15.33 ft [ 4.7m]
Radius= 11.95 ft [3.6m] Radius= 5.71 ft [1.7m]-
TOP VIEWSIDE VIEW
75
70
15£ -A
§ - B'7,CE 10
a - D
- E5
00 10 20 30 40 50 60 70 80 905
Elevation Angle (degrees)
3
PBESA45MHW.CAll designs, specifications, and availabilities ofproducts and services presented in this bulletinare subject to change without notice. (1016A)
© 2016 CPI ASC Signal Division
C omnuimculiotts tV- rower hu /nsirn
asc signal division
asCSigna
4.5 Meter High Wind ESAearth stations
Foundation, Typical Slab-7 ft. 9 in.-
7 ft. 9 in.
7 ft. 9 in.
-7 ft. 9 in.-
I
I
--S
-4 ft. 8 in.-
.3 ft. 8 in.
.3 ft. 8 in.
-4 ft. 8 in.-II
Typical Foundation Information
15ft(4.5m)
minimumclearance
Note: Crane access is to beprovided within 40ft (12m)
ofPAD #3 (based on 15 ton
o PAD 1
GPAD 3
O PAD 2
*
craneI
Assembly area for mount andantenna
Azm = Azimuthdirection of mount
20ft (6m)minimumclearance
->
2ft (0.6m)minimumclearance 15ft
(4.5m)minimumclearance
30ft (9m) minimumclearance
on either side of foundationfor crane access
*-30ft (9m)
-*
SID3
2 ft
Foundation information are provided in bulletin 237746, please contact ASC Signal.
Soil Bearing Capacity, 2000 lb/ft2 (9770 kg/m2)Reinforcing Steel, 1780 lbs (807 kg)Concrete Compressive 3000 psi (211 kg/cm2)Strength,Foundation Size: (for specific standard soil and typical design)
Length 15 ft 6 in (4.7 m)Width 15 ft 6 in (4.7 m)Depth 2 ft (0.61 m)Concrete Volume 17.8 yd3 (13.6 m3)
NOTE: Other typical foundation designs are available. Soil borings and foundationanalysis should be performed by a qualified civil engineer.
PBESA45MHW.CAll designs, specifications, and availabilities ofproducts and services presented in this bulletinare subject to change without notice. (1016A)
© 2016 CPI ASC Signal Division
earth stations<24L
2rwh<K2
<
Communications <6 Power Industries
asc signal division
ascSignal
4.5 Meter High Wind ESAMotor Drive Speed Summary
AzimuthElevationPolarization
0.05%0.05%
Variable
1%
0.5%0.5%
MotorizationOne motorization system is available for this antenna: the NGC trackingsystem that can support Steptrack, Smartrack and Ephemeris orbital tracking.
NGC-MK7
NGC-PK5PF
Motor KitAzimuth/Elevation Motor Kit
Polarization Drive Kit (DC Step Motors)Standard Temperature
Outdoor Unit Controller (Tracking)Power 200 - 230 VAC, 3 Phase 50/60 Hz NGC-ODU-208-5Power 380 - 460 VAC, 3 Phase 50/60 Hz NGC-ODU-380-5
Antenna controller, motorization and options are detailed in specific bulletins, please contactASC Signal.
Antenna ConfigurationsKu-Band Earth Station Antennas ITU CompliantMotorizable Mount with Az/EI Jackscrews. ES45T-HW-1
Motorization and NGC OptionsIndoorNGC-IDU
NGC-001NGC-002NGC-003NGC-RTX-2NGC-006NGC-007NGC-008NGC-009NGC-101NGC-102NGC-103NGC-104NGC-106NGC-107
NGC-108NGC-109NGC-115NGC-ULPC-INTFCNGC-ULPC-INTFC-2NGC-119
OutdoorNGC-201NGC-202NGC-205NGC-206NGC-207NGC-211NGC-AESC
NGC Rack Mounted Antenna Controller W/LCDTouch PanelNGC-IDU Analog Telephone ModemNGC-IDU Spectrum Analyzer Card - AnalogNGC-IDU DVB Receiver CardNGC IDU, L-Band Internal Beacon ReceiverNGC-IDU Emergency Stop ButtonNGC-IDU 10 Mhz Reference SourceNGC-IDU Redundant Power SupplyNGC-IDU Rack SlidesNGC-IDU Step Tracking SoftwareNGC-IDU Smartrack SoftwareNGC-IDU Predictive Track SoftwareNGC-IDU Full Tracking Capability SoftwareNGC-IDU Remote Access Software PackageNGC-IDU Spectrum Analyzer Enhanced UserInterfaceReceive Pattern Test ToolRedundancy Control SoftwareUplink Power Control Software FunctionUplink Power Control System Single ChannelUplink Power Control System Dual ChannelNGC High Availability System Redundancy Software
NGC ODU Low Temperature Kit (-40 C)NGC ODU High Temperature Kit (+60 C)NGC ODU Polarization Drive InterfaceNGC Exterior Emergency Stop ButtonPre Movement Alert Warning Light And AnnouncatorDual Path NGC RedundancyEnvironmental System Controller
Antenna controller, motorization and options are detailed in specific bulletins, please contactASC Signal.
5
PBESA45MHW.CAll designs, specifications, and availabilities ofproducts and services presented in this bulletinare subject to change without notice. (1016A)
© 2016 CPI ASC Signal Division
earth stations
Communications & Power Industries
asc signal division
4.5 Meter High Wind ESAFeed MatrixC- BAND FEEDSYSTEMS2CLPC-452CPC-45-1092CPCR-45-1092CPWCR-45-1202LPC-452LPCR-452LPWC-452LPWCR-452LPUC-454CPNC-45-2064LPCM-45
PORT
22222222244
XXX
X
X
XXXXX
X
X
RX 3.4 - RX 3.625 - RX 4.5 - TX 5.850 - TX 5.850 - TX 6.725 -4.2 GHz 4.2 GHz 4.8 GHz 6.425 GHz 6.725 GHz 7.025 GHz
X
XX
XXX
XX
XX
X
XX
X
XX
X
X
X- BAND FEEDSYSTEMS
PORT H RX 7.25 -7.75 GHz
TX 7.9 -8.4 GHz
2CPX-45 2 X X X
Ku- BAND FEEDSYSTEMS
PORT LP RX 10.95-12.75 GHz
RX 10.7 -13.25 GHz
TX 13.75-14.8 GHz
2LPKR-45-W 2 X X2LPKUNV-45 2 X X X
C/Ku- BAND FEED PORT KU C C RX 3.625 - RX 10.95-SYSTEMS LP LP CP 4.2 GHz 12.75 GHz4CPCLKR-45-W 4 X XX X4LPCKR-45-W 4 X X X X
6
QSCSignal
PBESA45MHW.CAll designs, specifications, and availabilities ofproducts and services presented in this bulletinare subject to change without notice. (1016A)
© 2016 CPI ASC Signal Division
Communications tV Power Industries
asc signal division
QSCSignal
4.5 Meter High Wind ESAAntenna Options and Spares
earth stations^Anchor Bolt and Template Kits Options201630 Anchor Bolt Kit For 5.6 Meter Earth Station
Antennas with Tripod Mounts206505 Anchor Bolt Template for 5.6 Meter Earth
Station Antennas with Tripod Mounts
Hub Equipment OptionsEMRGYLT-115 Emergency Hub Light Kit, 115 VACEMRGYLT-230 Emergency Hub Light Kit, 230 VACHUBHTR-230 Antenna Hub Heater, 230 VACHUBLCNTR-115/240 Hub Power Center, 115/240 VACHUBLCNTR-230 Hub Power Center, 230 VACHUBLT-115 Hub Light Kit, 115 VACHUBLT-230 Hub Light Kit, 230 VAC
Azimuth and Elevation Cross Axis Waveguide Options1XAC-45 C-Band Cross Axis Waveguide Kit, 2-Port.1XPC-45 C-Band Polarization Waveguide Kit, 2-Port.1XPK-45 Ku-Band Polarization Waveguide Kit, 2-Port.2XAC-45 C-Band Cross Axis Waveguide Kit, 4-Port.2XPC-45 C-Band Polarization Waveguide Kit, 4-Port.2XPK-45 Ku-Band Polarization Waveguide Kit, 4-Port.
Safety OptionsANTGND-9 Foundation Installed Grounding KitLRK9 Lightning Rod KitMANPL7 Maintenance Platform and Ladder KitOBWRNLT-115 Obstruction Warning Light Kit, 115VACOBWRNLT-230 Obstruction Warning Light Kit, 230VAC
Heating OptionsWEC45R-208-100 Electric Hot Air De-Ice System, 208 VAC, 3
PhaseWEC45R-380-100 Electric Hot Air De-Ice System, 380 VAC, 3
PhaseOther Options201769 Elevation Handwheel Kit201887 Azimuth Handwheel KitANGVERN-7 Manual Angle Indicator209906-2 Lubrication and Maintenance KitFTST Feed System TestingTK-MAN-LG Tool Kit, Large Manual AntennasTK-MOT-LG Tool Kit, Large Motorized Antennas
7
PBESA45MHW.CAll designs, specifications, and availabilities ofproducts and services presented in this bulletinare subject to change without notice. (1016A)
© 2016 CPI ASC Signal Division