444316018841 - nt mi rc400b slimblend without enec...a b glider should be adjusted and ˜xation...
TRANSCRIPT
![Page 1: 444316018841 - NT MI RC400B SlimBlend without ENEC...A B Glider should be adjusted and ˜xation screw must be tightened before installation. 2 0.6Nm. 10/11 D ALI LED M a in PSD Touch](https://reader033.vdocuments.us/reader033/viewer/2022050223/5f6831927fd7d55c67451e96/html5/thumbnails/1.jpg)
RC400B, RC402B, SM400CSM402C, SP400P, SP402P
SlimBlendback cover
PSDPSU
DAL I
MA IN
LE D
+10 mm for Wieland cable, or thickness of used cable + 2 mm (for bend) for Push-in
90
150
85
150
C = A - 30
D = B - 30
AB
515
47
Backcover
20
RC400B / RC402B
PCV
CPC
VPCvisible
ceiling
CPCconcealed
ceiling
PCVplaster
version
SMsurfacemountedversion
SPsuspended
T20
indoor 50Hz60Hz
220V240V LEDs IK0225 °C
TaMax.40 °C
Min.10 °C
GLOWWIRE
650 °C
Printed in HungaryData subject to change without noticeKeep for future reference: www.philips.com/lighting
Module Akg
CPC PCV
SM
SP
Dimensions in mm
6,6
B
444316018454 © 2019 Signify Holding. All rights reserved 1/11
5,6
5,7
6
6,1
6,7
7
7,1
7,3
7,4
7,7
7,8
IP40
IP40
IP40
IP40
IP20
IP20
IP20
IP20
IP20
IP20
IP20
IP20
600 600
600 600
600 600
1200 300625 625
1250 312.5
1200 300625 625
1250 312.5
1200 300625 625
1250 312.5
VPC
5,6
5,7
6
6,1
IP40
IP40
IP40
IP40
597 597
1197 297622 622
1247 312
![Page 2: 444316018841 - NT MI RC400B SlimBlend without ENEC...A B Glider should be adjusted and ˜xation screw must be tightened before installation. 2 0.6Nm. 10/11 D ALI LED M a in PSD Touch](https://reader033.vdocuments.us/reader033/viewer/2022050223/5f6831927fd7d55c67451e96/html5/thumbnails/2.jpg)
SP400P / SP402P / SM400C / SM402C/ PCV / CPC
Suspended, Surface mounted, PCV and CPC versions are delivered with plastic pro�les.Plastic pro�les cannot be removed from the edges of the luminaire throughout the entire work life!
Do not press the surface of MLO plate to avoid disturbances in optical window perception.
68.4
Rectangular Square T-bar Bus
SM400C /SM402C
SP400P / SP402P
2/11
!
!
DO NOT PRESS THE SURFACE OF MLO PLATE
Luminaires should be removed from plastic bags immediately before installation!
![Page 3: 444316018841 - NT MI RC400B SlimBlend without ENEC...A B Glider should be adjusted and ˜xation screw must be tightened before installation. 2 0.6Nm. 10/11 D ALI LED M a in PSD Touch](https://reader033.vdocuments.us/reader033/viewer/2022050223/5f6831927fd7d55c67451e96/html5/thumbnails/3.jpg)
3/11
All versions with PSU (on/o�) /PSD (dimmable) drivers under back cover
back cover
All versions with PSU (on/o�) /PSD (dimmable) drivers standalone
PSD
PSU
DALI
M AIN
LE D
All versions with POE (Power Over Ethernet) drivers
Fixation methodsafety cable.
The light source of this luminaire is not replaceable;when the light source reaches its end of life thewhole luminaire shall be replaced.
VPC (lay-in)
Option: Safety cable (SC)
1 2
1
2
advised200mm
!
! ATTENTIONOBSERVE PRECAUTIONS
FOR HANDLINGELECTROSTATIC
SENSITIVEDEVICES
I mains (A)
I nom.
Time (us)Tref
max/2
I max
ACLversions only
Inrush current
6mm
Electrical characteristics
MCB Luminaire max.
PoE driver
Instructions for SpaceWise versions
![Page 4: 444316018841 - NT MI RC400B SlimBlend without ENEC...A B Glider should be adjusted and ˜xation screw must be tightened before installation. 2 0.6Nm. 10/11 D ALI LED M a in PSD Touch](https://reader033.vdocuments.us/reader033/viewer/2022050223/5f6831927fd7d55c67451e96/html5/thumbnails/4.jpg)
4/11
1
3
4
3 (2x)
0.5Nm
1 (2x) 2 (2x)
5 mm
0.5Nm
1
2
1
Safety cable
2 (2x)
sym-concealed
A-sym-concealed
Rect.
Square
Rect.
Square
2
![Page 5: 444316018841 - NT MI RC400B SlimBlend without ENEC...A B Glider should be adjusted and ˜xation screw must be tightened before installation. 2 0.6Nm. 10/11 D ALI LED M a in PSD Touch](https://reader033.vdocuments.us/reader033/viewer/2022050223/5f6831927fd7d55c67451e96/html5/thumbnails/5.jpg)
5/11
B
A
Solid wood
1 2
4
5
3
PCV (Plaster ceiling version)
3.534
Min.Max.
Min. 30Max. 60
rotatable
1 (2x)
2 (2x)
2 (2x)
5 mm
2 (2x)
0.5Nm
1 (2x)0.5Nm
!
L
L
L
R
Module A(mm) B(mm)
![Page 6: 444316018841 - NT MI RC400B SlimBlend without ENEC...A B Glider should be adjusted and ˜xation screw must be tightened before installation. 2 0.6Nm. 10/11 D ALI LED M a in PSD Touch](https://reader033.vdocuments.us/reader033/viewer/2022050223/5f6831927fd7d55c67451e96/html5/thumbnails/6.jpg)
6/11
Option:safety cablebracket (2x)
7 8 9
10
1
2 SeePush-in
CLICK
CLICK
![Page 7: 444316018841 - NT MI RC400B SlimBlend without ENEC...A B Glider should be adjusted and ˜xation screw must be tightened before installation. 2 0.6Nm. 10/11 D ALI LED M a in PSD Touch](https://reader033.vdocuments.us/reader033/viewer/2022050223/5f6831927fd7d55c67451e96/html5/thumbnails/7.jpg)
7/11
SM (Surface mounted)
1
2
![Page 8: 444316018841 - NT MI RC400B SlimBlend without ENEC...A B Glider should be adjusted and ˜xation screw must be tightened before installation. 2 0.6Nm. 10/11 D ALI LED M a in PSD Touch](https://reader033.vdocuments.us/reader033/viewer/2022050223/5f6831927fd7d55c67451e96/html5/thumbnails/8.jpg)
8/11
4
5
6 7
RT (rectangular)
SQ (square)
1.5NmT20
Suspension Kits.
Suspension set contens 3x 2x cable
Square · · · · x4x4x2x4
SMT Rectangular
· · · · 2x · 4x 2x
SMTT · · · 4x 2x 2x
1.5NmT20
![Page 9: 444316018841 - NT MI RC400B SlimBlend without ENEC...A B Glider should be adjusted and ˜xation screw must be tightened before installation. 2 0.6Nm. 10/11 D ALI LED M a in PSD Touch](https://reader033.vdocuments.us/reader033/viewer/2022050223/5f6831927fd7d55c67451e96/html5/thumbnails/9.jpg)
9/11
N
L
+DA/LS DA
SP (Suspended)
6a 6b 6c
5a 5b 5c
SMT SP (Suspended twin, traingle) SM4 SP (Suspended 4x wire)
3 43x
1
2
3
2
21
SMTT SP (Suspended twin, traingle, T-bar)
L = 1700
CLIC K
2x
24 mm
T-bar
90°
2
3
1
L = 1700
L
N
+ DA / LS
DA
Black
Yellow-Green
Blue
Orange
Purple
1
1
3 (2x)
A(mm) B(mm)
BA
Glider should be adjusted and�xation screw must be tightened before installation.
2
0.6Nm
![Page 10: 444316018841 - NT MI RC400B SlimBlend without ENEC...A B Glider should be adjusted and ˜xation screw must be tightened before installation. 2 0.6Nm. 10/11 D ALI LED M a in PSD Touch](https://reader033.vdocuments.us/reader033/viewer/2022050223/5f6831927fd7d55c67451e96/html5/thumbnails/10.jpg)
10/11
DALI LED
M ain
PSD Touch & Dim
PSU
PSD
N
L
L
N
LineNeutral
DALIDALI
N
L
N
L
LineNeutral
DALIDALI
PSD
PSD-T
3
12
N
DALI 1
LN
12
N
LsLN/Ns
PSD-EL
12
N
LLLN/NN
USPLE-USP
12
N
LLLN/NN
PSD-T+ACL
12
N
LsLN/Ns
N
N
L
L
N
N
L
L
DALI 1DALI 2
DADA/LS
DADA/LS
PSD-ACL
1
2
1
2
L
N
Independent / standalone drivers
Push-in (PIP)
NN
PEPELL
ACor
DC
DALItransmitterreciever
DALI+DALI+
DALI +DALI +
1 2
1 2
N
L
N
L
1700
VPC/PCV/CPC/SM:+DA/LS DA
Suspended main cable
Luminaire side
connect to (empty)connection blockon luminaire.
![Page 11: 444316018841 - NT MI RC400B SlimBlend without ENEC...A B Glider should be adjusted and ˜xation screw must be tightened before installation. 2 0.6Nm. 10/11 D ALI LED M a in PSD Touch](https://reader033.vdocuments.us/reader033/viewer/2022050223/5f6831927fd7d55c67451e96/html5/thumbnails/11.jpg)
11/11
Replacement driver
Wieland (W) PSU (with back cover)
Wieland (W) PSD Driver
Wieland (W) Actilume
Connector GST18i3,3 pole, male
Connector GST18i3,3 pole, male
DALI
MAINLED
Connector GST18i3,3 pole, male
DALI (BST14)
DALI (BST14)
DALI (BST14)
Min.7mm
1a 1b
PoE / PoE-EL
Condition Philips to specify to the customers (instruction):> to use UTP (Unshielded Twisted Pair) CAT5E or CAT6 cable> the maximum length of the cable to be 20 meters.Apply a minimum radius of the Ethernet cable of 4x the cable diameter.
! ATTENTIONOBSERVE PRECAUTIONS
FOR HANDLINGELECTROSTATIC
SENSITIVEDEVICES
electrical regulations or the national requirements.
ing to avoid scraping or dirtying the optical part.Indoor use only.
During installation or maintaining the luminaire please use gloves to avoid spots on the cover.
- Fingerprints, etc.: use a cleaner for synthetic materials with antistatic properties.
CLICK
rectangle 6xsquare 4x
To avoid risk of a�ected luminaire performance, make sure to unpack and install product when all constructionworks are �nished.
![Page 12: 444316018841 - NT MI RC400B SlimBlend without ENEC...A B Glider should be adjusted and ˜xation screw must be tightened before installation. 2 0.6Nm. 10/11 D ALI LED M a in PSD Touch](https://reader033.vdocuments.us/reader033/viewer/2022050223/5f6831927fd7d55c67451e96/html5/thumbnails/12.jpg)
© 2019 Signify HoldingAll rights reserved. This document contains information relating to the product portfolio of Signify which information may be subject to change. No representation or warranty as to the accuracy or completeness of the information included herein is given and any liability for any action in reliance thereon is disclaimed. The information presented in this document is not intended as any commercial o�er and does not form part of any quotation or contract. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.. All other trademarks are owned by Signify Holding or their respective owners.
Signify Holding.The Netherlands