4310 blower - home - national vacuum...
TRANSCRIPT
Installation Ready
Blower4310Series
Series
607-
SeriesVacuum pumps & Blowers
607 Heavy Duty Vacuum Pump Packages
Reliable – Efficient – Cost Effective
natvac.com
National Vacuum Equipment Locations in Michigan & TexasMADEIN USA
800-253-5500 | 800-998-6834 FAX | [email protected]
607 Max Pak
380 CFM!
Factory Designed and Built for the Perfect Fit
#1 Industrial Duty Vacuum Pump
Hydraulic Motor Drive (Available for all models)• Heavy-duty automatic alignment bracket• SAE B face 2 and 4 bolt flange• Coupler set • Properly sized hydraulic motor
607 Challenger Series Packages
607 Max PakAll features included in the Muffler Pak (please see previous page) plus:• High efficiency aluminum moisture trap• Accessible 6” stainless steel float ball • BUNA positive shut-off ball seat• 2” lever drain valve• Blind intake flange standard (other fittings available)• Vacuum/pressure relief valve and gauge
Each package is designed around our industry leading Challenger series vacuum pump and built in our state of the art fabrication facility featuring:
•Heavy duty 3/8 steel gusseted frames• Durable powder coat paint• Easily accessible maintenance points
• Properly sized components• Grade 8 fasteners
Pump Stand Complete (Available for fan cooled and liquid cooled models)• 400 series three-shaft gearbox accommodates clockwise and counterclockwise rotation• Coupler set with shear protection• Easy-align, adjustable gearbox bracket• Also available with hydraulic drive
607 Muffler PakAll features included in the Standard Mounting Pak plus:• Compact design square oil catch muffler• Stainless steel mesh filter• Removable Exhaust deflector (covering 3” NPT fitting)• All elbows, fittings and high temp hoses are factory connected• Right-hand or left-hand muffler location available
Hydraulic Motor Drive Adds 14” to Pump Length
Clockwise Shown
Counter Clockwise
Shown
Clockwise Shown
CounterClockwise
Shown
Additional mounting bracket required for liquid cooled model
607 Challenger Series Packages
Top of Frame Mount Package• Designed for side valve pump• Mounting bracket that includes 12” oil catch muffler with drain valve and remote oil tank• Balk head supported connection from vacuum tank
39 3/8”
39 3/8”
45 7/8”
1 1/4”4” TTMAFlange
27 1/2”
18”
28 7/16”
1
1
2
2
345678
8
A A
B B
C C
D D
NVE NationalVacuum
Equipment, Inc.2707 Aero Park Drive, Traverse City, MI 49686Phone: (231) 941-0215 Fax: (231) 941-2354
TOLERANCES UNLESS OTHER WISE SPECIFIED
One place (.X) ±.1Two places (.XX) ±.01Three places (.XXX) ±.005Angles ±1°Fractional (X/X) ±1/16All machined surfaces 125 RMS max.Remove all burrs and sharp edges.CAD drawing - NO manual changes.All dimensions in inches unless specified.
This document may contain confidential tradesecret information which is the exclusive
property of National Vacuum Equipment. Anyinformation on this drawing is not to be
disclosed to anyone not having a "Need toKnow." The information contained herein is to
be used only in accordance with the bestinterests of National Vacuum Equipment.
PART NAME:
MATERIAL:
DRAWN BY:
SCALE:
CHECKED BY:
DATE:
ADT
PART NO.SHEET
2 117-607A-TM2-FS2 of
1 : 8
SEE BOM
APPROX. WT.CAD FILE LOCATION: I:\Engineering\CAD - Production\117-607A-TM2-FS.idw
SHEET SIZE D
607 TM PACKAGE
60 1/4"
42 3/4"
32 1/2"CENTER DISTANCE
2'-8 1/4"
2'- 3/4"
40"
1 1/2"Ø
1
1
2
2
345678
8
A A
B B
C C
D D
NVE NationalVacuum
Equipment, Inc.2707 Aero Park Drive, Traverse City, MI 49686Phone: (231) 941-0215 Fax: (231) 941-2354
TOLERANCES UNLESS OTHER WISE SPECIFIED
One place (.X) ±.1Two places (.XX) ±.01Three places (.XXX) ±.005Angles ±1°Fractional (X/X) ±1/16All machined surfaces 125 RMS max.Remove all burrs and sharp edges.CAD drawing - NO manual changes.All dimensions in inches unless specified.
This document may contain confidential tradesecret information which is the exclusive
property of National Vacuum Equipment. Anyinformation on this drawing is not to be
disclosed to anyone not having a "Need toKnow." The information contained herein is to
be used only in accordance with the bestinterests of National Vacuum Equipment.
PART NAME:
MATERIAL:
DRAWN BY:
SCALE:
CHECKED BY:
DATE:
ADT
PART NO.SHEET
2 117-607A-TM2-FS2 of
1 : 8
SEE BOM
APPROX. WT.CAD FILE LOCATION: I:\Engineering\CAD - Production\117-607A-TM2-FS.idw
SHEET SIZE D
607 TM PACKAGE
60 1/4"
42 3/4"
32 1/2"CENTER DISTANCE
2'-8 1/4"
2'- 3/4"
40"
1 1/2"Ø
39 3/8”
39 3/8”
45 7/8”
1 1/4”4” TTMAFlange
27 1/2”
18”
28 7/16”
Dimensions reflect pump stand complete muffler pak, and max pak.
Bolts to side of truck frame
Hydraulic or Belt & Pulley
Available
DISTRIBUTED BY:
For over 25 years NVE has been providing quality vacuum system components to the liquid waste markets. From design, to development to product support, NVE IS the industry leader.
In addition to our team of engineers and highly qualified support staff, NVE has a state of the art machine shop, fabrication shop, and powder coat paint facility housed in two plants in Traverse City, Michigan. We also have a warehouse and sales support facility in Mansfield, Texas.
For questions and additional information please contact your dealer or NVE direct at 800.253.5500.
Thank you,
©2014 National Vacuum Equipment, Inc. | Revised 02/2014
607 Challenger Series Packages - Continued
Blower4310Series
Series
607-
SeriesVacuum pumps & Blowers
607 Belt Drive Deutz Engine Package• Rugged, low-profile frame for belly-mount applications• 45.6 HP Deutz power unit with tachometer and LOFA control panel• 23 gallon steel fuel tank• High efficiency oil catch muffler• 12 volt high crank capacity battery• Powder coat painted and factory assembled
Also Available With Pressure Washer!
607 Fan Cooled Side Valve Direct Drive• Fits between truck frame• Direct drive with P.T.O.• Stainless steel mud guard• Side valve for easy access
ISO VIEW
PARTS LISTDESCRIPTIONPART NUMBERQTYITEM
607 SIDE MANIFOLD, CCW FAN COOLED100-607A-FS11FLANGE ELBOW ALUM 3"120-063-00722607 BETWEEN FRAME MOUNT STAND280-355-02413GUARD SPLASH 607280-355-02514COUPLER HUB E20 1 1/2" BORE424-200-15015ELBOW, 3" STE CAST802-063-00526
FASTENERS (GRADE 8 YELLOW ZINC UNLESSS OTHERWISE NOTED)DESCRIPTIONPART NUMBERQTYITEM
NYLOCK NUT - 5_8 UNCNYLOCK NUT - 5_8 UNC4301FLAT WASHER - 5/8"FW - 5_88302HEX HEAD CAP SCREW - 5_8 X 2.25 UNCHHCS - 5_8 X 2.25 UNC4303
1
1
2
2
3
3
4
4
A A
B B
C C
D D
NVE NationalVacuum
Equipment, Inc.2707 Aero Park Drive, Traverse City, MI 49686Phone: (231) 941-0215 Fax: (231) 941-2354
TOLERANCES UNLESS OTHER WISE SPECIFIED
One place (.X) ±.1Two places (.XX) ±.01Three places (.XXX) ±.005Angles ±1°Fractional (X/X) ±1/16All machined surfaces 125 RMS max.Remove all burrs and sharp edges.CAD drawing - NO manual changes.All dimensions in inches unless specified.
This document may contain confidential tradesecret information which is the exclusive
property of National Vacuum Equipment. Anyinformation on this drawing is not to be
disclosed to anyone not having a "Need toKnow." The information contained herein is to
be used only in accordance with the bestinterests of National Vacuum Equipment.
PART NAME:
MATERIAL:
DRAWN BY:
SCALE:
CHECKED BY:
DATE:
ADT
PART NO.SHEET
1 117-607A-0011 of
1 : 8
SEE BOM
APPROX. WT.CAD FILE LOCATION: I:\Engineering\Projects\1285-Projects for the Show\Cad
Data\607 Between Frame Mount\117-607A-001.idw
SHEET SIZE C565 LBS
607 FAN COOLED CCW SIDE VALVE BETWEENTHE FRAME MOUNT
REVISION HISTORYREV DATE DESCRIPTION APPROVED ZONEA 2/6/14 DRAWING CREATED ADT -
27 1/16"
45 1/2" 28 15/16"
34" 17 3/4"
3
1
4
NOTES:1) DURING ASSEMBLY, REMOVE (2) 120-063-367
ISO VIEW
PARTS LISTDESCRIPTIONPART NUMBERQTYITEM
607 SIDE MANIFOLD, CCW FAN COOLED100-607A-FS11FLANGE ELBOW ALUM 3"120-063-00722607 BETWEEN FRAME MOUNT STAND280-355-02413GUARD SPLASH 607280-355-02514COUPLER HUB E20 1 1/2" BORE424-200-15015ELBOW, 3" STE CAST802-063-00526
FASTENERS (GRADE 8 YELLOW ZINC UNLESSS OTHERWISE NOTED)DESCRIPTIONPART NUMBERQTYITEM
NYLOCK NUT - 5_8 UNCNYLOCK NUT - 5_8 UNC4301FLAT WASHER - 5/8"FW - 5_88302HEX HEAD CAP SCREW - 5_8 X 2.25 UNCHHCS - 5_8 X 2.25 UNC4303
1
1
2
2
3
3
4
4
A A
B B
C C
D D
NVE NationalVacuum
Equipment, Inc.2707 Aero Park Drive, Traverse City, MI 49686Phone: (231) 941-0215 Fax: (231) 941-2354
TOLERANCES UNLESS OTHER WISE SPECIFIED
One place (.X) ±.1Two places (.XX) ±.01Three places (.XXX) ±.005Angles ±1°Fractional (X/X) ±1/16All machined surfaces 125 RMS max.Remove all burrs and sharp edges.CAD drawing - NO manual changes.All dimensions in inches unless specified.
This document may contain confidential tradesecret information which is the exclusive
property of National Vacuum Equipment. Anyinformation on this drawing is not to be
disclosed to anyone not having a "Need toKnow." The information contained herein is to
be used only in accordance with the bestinterests of National Vacuum Equipment.
PART NAME:
MATERIAL:
DRAWN BY:
SCALE:
CHECKED BY:
DATE:
ADT
PART NO.SHEET
1 117-607A-0011 of
1 : 8
SEE BOM
APPROX. WT.CAD FILE LOCATION: I:\Engineering\Projects\1285-Projects for the Show\Cad
Data\607 Between Frame Mount\117-607A-001.idw
SHEET SIZE C565 LBS
607 FAN COOLED CCW SIDE VALVE BETWEENTHE FRAME MOUNT
REVISION HISTORYREV DATE DESCRIPTION APPROVED ZONEA 2/6/14 DRAWING CREATED ADT -
27 1/16"
45 1/2" 28 15/16"
34" 17 3/4"
3
1
4
NOTES:1) DURING ASSEMBLY, REMOVE (2) 120-063-367
National VacuumEquipment
Traverse City MichiganMade In U.S.A.
Clean Filter Regularly350°F Max. Temp.
�������������������������������������
38”
30.68”
9.64”
29.59”
6”
60”
National VacuumEquipment
Traverse City MichiganMade In U.S.A.
Clean Filter Regularly350°F Max. Temp.
�������������������������������������
38”
30.68”
9.64”
29.59”
6”
60”