43054 mich exploding tyres pstr - the british tyre ... · inflation pressure. airlines should be...

1
WARNING Exploding Tyres CAN KILL Always check that the tyre being fitted is the correct size and type. Check to confirm the size of the wheel and look for any damage. Repaired tyres or tyres suspected of running flat should be examined carefully before fitting or re-inflating. Check to establish the correct tyre inflation pressure. Airlines should be fitted with at least 2 metres (6 feet) of hose between the tyre and airline control. Tyres that require more than 40 psi should be placed in a secure tyre cage and inflated. Never leave unattended an airline which is attached to a tyre. Don’t lean over, sit, or stand in front of any tyre during inflation. 40+ PSI REMEMBER Wheel nuts must be tightened to the correct torque setting using a calibrated torque wrench Issued in the interests of safety by the British Tyre Manufacturers’ Association Registered Office: 5 Berewyk Hall Court, White Colne, Colchester, CO6 2QD Telephone: 01787 226995 www.btmauk.com

Upload: others

Post on 06-Oct-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: 43054 Mich Exploding Tyres Pstr - The British Tyre ... · inflation pressure. Airlines should be fitted with at least 2 metres (6 feet) of hose between the tyre and airline control

WARNINGExploding Tyres

CAN KILL

Always check thatthe tyre beingfitted is the correctsize and type.

Check to confirmthe size of thewheel and look forany damage.

Repaired tyres ortyres suspected ofrunning flat shouldbe examinedcarefully beforefitting or re-inflating.

Check to establishthe correct tyreinflation pressure.

Airlines should befitted with at least2 metres (6 feet) ofhose between thetyre and airlinecontrol.

Tyres that requiremore than 40 psishould be placed ina secure tyre cageand inflated.

Never leaveunattended anairline which isattached to a tyre.

Don’t lean over, sit,or stand in front ofany tyre duringinflation.

40+PSI

REMEMBER – Wheel nuts must be tightened to the correct torquesetting using a calibrated torque wrench

4

4

6

4

4

4

4

6

Issued in the interests of safety by the British Tyre Manufacturers’ Association

Registered Office: 5 Berewyk Hall Court, White Colne, Colchester, CO6 2QD Telephone: 01787 226995 www.btmauk.com