mViewer Profor Android Device

1. System Requirements

This program is designed and applied only for Android OS (version 1.6 or higher) based mobile device. Display: Min. 3.7 inch screen.

2. Site Registration / Connection

Tab “MONITORING” on the Main Menu. Tab “ ” on top right corner.

Enter Device Name, IP Address, Port Number, User ID/PW and Tab “ ” to save the setting. Press the Device Name for 2 sec from Live Device List to “Edit” or “Delete” the registered site. Tab the Device Name from Live Device List. Pop-up window will appear to confirm the connection, Tab “ ” to proceed.

3. Live Screen (Portrait View)

To change the channel. - Slide your finger from Right to Left to ascend. - Slide your finger from Left to Right to descend.

To Take a Screen shot, Tab “ ” and the picture will be saved to your device. Tab “ ” to remove Camera Name and Date/Time from OSD. Tab “ ” and screen will change in serial from 1ch, 4ch, 9ch and 16ch. Tab “ ” to change instantly, select from 1ch, 4ch, 9ch and 16ch

OSD

DIVISION

4. Live Screen (Portrait View)

Tab “ ” to enable Landscape View.

Tab “ ” to control PTZ Camera.

Tab “ ” to control Alarm Out

Tab “ ” to change to other Device.

Tab “ ” to enter Search Mode.

PTZ&PRESET

ALARM

DVR LIST

SEARCH

To enable the Landscape View, Tab “ ” from Live Screen. Tilt the Device Horizontally.

5. Live Screen (Landscape View)

Use Arrow to move the Camera Use “ / ” to zoom in/Out. Use “ / / ” to move to Preset points.

PTZ&PRESET

Tab “ ” to enable the PTZ control and it will appear on lower right corner of OSD.

6. PTZ ControlOnly works on 1CH Display.

Audio out is available only in full screen mode. (1channel only)

Tab “ ” to enable the Alarm Out control and it will appear on lower left corner of OSD

7. Alarm Out

ALARM

Tab the numbers to send Alarm to Device

Users can hear the Audio of 1 channel in live and playback mode. Tab “ ” to turn on/off the Audio.

8. Audio

AUDIO

Tab “PLAYBACK” from Main Menu or “ ” from Live screen to enter Search. Choose Date/Time from Calendar and Tab “ ”

9. Search

SEARCH

Tab “ ” to enable Landscape view.

Tab “ ” to change Date/Time of Search.

Tab “ ” to adjust playback speed.

Tab “ ” to enable Audio (1channel only)

Tab “ ” to change to other Device.

Tab “ ” to go to Live Screen.

Tab “ ” to control the playback.

AUDIO

DVR LIST

CALENDAR

LIVE

Tab “SNAPSHOT GALLERY” from Main Menu to view the captured image.

Tab device name to view snap shot.

To delete the folder. - Press the device name for 2-3seconds till pop-up message appears.

10. Snapshot Gallery

- Tab “OK” to delete.

Tab “SETTING” from Main Menu to see the information on mViewer Pro. User can read the manual and change the password.

11. Setting