4 - single toggle jaw crusher (pst1209 & pst1108) 15 6 18
TRANSCRIPT
SINGLE TOGGLE JAW CRUSHERFor Primary Crushing of Hard Rocks & Mineral Ores
FEATURES
Best Engineered Geometry Rugged Construction Proven Performance
Compact Design Impeccable Quality Economical Operating Costs
Heavy Duty Parts Thoroughly Field Tested High Reliability
Industrial Solutions
thyssenkrupp Industries India Pvt. Ltd.
Pune Works Pimpri, Pune - 411 018, Maharashtra, IndiaP: +91 20 2742 5461-64F: +91 20 2742 5350Email: [email protected]
Hyderabad Works & Standard Machine BusinessSurvey Nos: 212–215, IDA, Phase - II,Cherlapally, Hyderabad - 500 051, Telangana, IndiaP: +91 40 2726 3647 / 3540 / 2762 / 3015F: +91 40 2726 3162Email: [email protected]
Registered Office
Mumbai154 C, Mittal Tower, 15th Floor,210, Nariman PointMumbai - 400 021, IndiaP: +91 22 2202 0064 / 6837F: +91 22 2204 4025Email: [email protected]
Branches
ChennaiTemple Tower, 5th Floor, Nandanam672, Anna Salai, Chennai - 600 035, IndiaP: +91 44 2431 4235 / 2433 9482F: +91 44 2434 8198Email: [email protected]
KolkataEco-Space, Premises No.701, Block-A7th Floor, New Town, Rajarhat,Kolkata - 700 156. IndiaP: +91 33 6605 5200 / 01F: +91 33 6605 5218Email: [email protected]
New Delhi407 A, Hemkunt Tower, 98, Nehru PlaceNew Delhi - 110 019, IndiaP: +91 11 2644 9971 /72 /73F: +91 11 26468968Email: [email protected]
Corporate Identity No. : U74999MH1947PTC005508E-mail: [email protected]: www.thyssenkrupp-industries-india.com
STANDARD SPECIFICATIONS
Capacities based on a bulk density of 1.6 t/cu.m of hard rocks; will vary with material characteristics and application. For Final selection kindly be in touch with thyssenkrupp.
JAW CRUSHER SELECTION
Furnish following information to enable us to recommend the right size of crusher best suited to your primary crushing application.
! Feed material & its characteristics
! Bulk density and gradation of feed with maximum lumpsize
! Feeding method proposal
Product gradation shown are indicative only; will vary with feed gradation and material characteristics.Contact for more information
PRODUCT GRADATION
Per
cent
Pas
sing
(%
)
sieve Size mm
TECHNICAL FEATURES! Its kinematics ensure smooth operation and long life! Well matched geometry and crushing dynamics! Totally resilient construction for high endurance against
shock loads! Robust swing jaw of box construction! Large diameter eccentric main shaft of forged alloy steel! Grease lubricated self-aligning double row roller bearings! High manganese cast steel machined jaw plates, fully
reversible, firmly secured and profiled for smooth flow and higher throughput
! Lubrication free toggle and toggle seat with minimum friction
! Hydraulic adjustment of CSS! Large crushing chamber, longer stroke and optimum
crushing speed! Higher nip angle to take maximum feed size and high
reduction ratio! Compact and well balanced suitable for fixed and mobile
plants
ASSEMBLY AND TESTINGThe machine is assembled under stringent quality environment, and test-run at factory for trouble free operation at site. Dispatched fully assembled for quick and ease of erection at site.
HIGH PERFORMANCE - LARGE VOLUMES-LOW MAINTENANCE
Model Feed Opening
Inch mm
Max Feedsize-mm
SpeedRPM
MotorKW
CSSRange-mm
CapacityTPH
PST 9060 36x24 500 275 75 60-150 80-200915x610
PST 1108 44x32 650 230 110 75-200 130-4001115x810
PST 1209 50x38 800 200 160 100-250 190-6601270x950
Fly Wheel
Fixed Jaw Plate
Fixed Jaw
Side Liners
Swing Jaw Plate
Main Frame
Drive Fly Wheel
Swing Jaw Toggle Block
Tension RodTension SpringToggle
Frame Bearing
CONSTRUCTION DETAILS
Main Frame
Swing Jaw Assembly
Fully fabricated with quality-tested weldable steel plates. Reinforced and ribbed to withstand heavy primary crushing loads. Complete frame is stress relieved for long life. Fully machined for accurate seating and alignment of all components.
The swing jaw is of robust construction, fully stress relieved and machined to provide a firm support for the jaw plate.
The jaw plates are of profiled construction and reversible for maximum wear life. The main shaft is forged alloy steel, hardened & tempered, and designed to withstand heavy primary crushing loads. Precision machined to close tolerances and fine finish, the large size main shaft offers fatigue resistance and long life. The swing jaw and main frame bearings are heavy-duty double-row roller bearings, precision assembled, grease lubricated, and fitted with foolproof labyrinth seals
against dust ingression. The bearing arrangements are designed for continuous duty applications.
The toggle system is designed to handle large crushing pressures. The toggle ends and toggle seats are specially prepared for smooth rocking and least friction under no lubrication environment. Manually operated hydraulic jack arrangement facilitates quick removal of toggle and closed side setting adjustment.
Toggle and CSS Adjustment
ROBUST CONSTRUCTION-HIGH PRECISION-CONTINUOUS DUTY