4 molten sulphur pump presentation july 28 2009-97-2003 compatibility mode

4
Hayward Gordon Molten Sulfur Pump Jacketed Vertical Cantilever Molten Sulfur Pump Cantilever Impeller clearance adjustment by Sh ft S l adjustment by shims and jacketing screws Bearing Seals Labyrinth Bearings – Grease lubricated L10 30 000 HRS Shaft Seals Non-metallic throttle bushings as standard L10 30,000 HRS Support Columns – Double walled precision spigot mating Shaft -designed well below the first critical speed ANSI (Clean) XR (dirty) pump Jacketing of column discharge pipe optional Optional strainers ANSI (Clean) XR (dirty) pump wet ends with open impeller

Upload: amigdal

Post on 26-Sep-2015

3 views

Category:

Documents


2 download

DESCRIPTION

pumps

TRANSCRIPT

  • Hayward GordonMolten Sulfur PumpJacketed Vertical Cantilever Molten Sulfur PumpCantilever

    Impeller clearance adjustment by

    Sh ft S l

    adjustment by shims and jacketing screws

    Bearing SealsLabyrinth

    Bearings Grease lubricatedL10 30 000 HRS

    Shaft SealsNon-metallic throttle bushings as standard

    L10 30,000 HRS

    Support Columns Double walled precision spigot mating

    Shaft -designed well below the first critical speed

    ANSI (Clean) XR (dirty) pump

    Jacketing of column discharge pipe optional

    Optional strainers

    ANSI (Clean) XR (dirty) pump wet ends with open impeller

  • Hayward GordonMolten Sulfur Pump

    Jacketed Vertical Lineshaft

    Molten Sulfur Pump

    Thrust bearings -Impeller clearance adjustment shims g

    Regreasable double or triple row angular contact upper bearing housing integral with motor support

    jand built in jacking

    screws

    Sh ft S l 6 i integral with motor support pedestal

    Shaft Seal 6 rings min Optional packing or mechanical seal

    Support Columns Double

    Submerged Bearing Jacketed column &

    walled precision spigot mating

    Submerged BearingNi-Resist (or Carbon Graphite)

    Bearing lub molten sulfur ANSI wet end with Keyed

    discharge pipe (casing optional)

    Bearing lub molten sulfur(3/4 line)

    Optional strainer

    yon impeller with bolt

  • Hayward GordonMolten Sulfur Pump

    Jacketed Vertical Lineshaft

    Molten Sulfur Pump

    B i l b lt lfBearing lub molten sulfur

    Draining of theDraining of the Molten Sulfur

  • Hayward GordonMolten Sulfur Pump Bearing Housing & Bearing

    Horizontal Jacketed Molten Sulfur Pump

    Impellers Fully Open-Fully Closed Recessed

    Bearing Housing & Bearing Frame

    Heavy Radial & Double Row Thrust Oil Lube

    C li C il ti lFully Closed, RecessedClearances adjusted

    through shimming jacketing screws in the

    Cooling Coils - optional

    jacketing screws in the back

    Casing with integral cast feet integral cast feet 150# or 300# flat face or raised face

    flanges

    Shafts & sleeves large diameter for

    Back Pull Out Designlarge diameter for min deflection

    hook type sleeve in various materials

    Seals Glands Seal Housing Special Seals Jacketed Housing Jacketed Gland