3rd electronic and green ; b

@Conference collection

3rd Electronic and Green

Materials International

Conference 2017 (EGM 2017)Krabi, Thailand29-30 April 2017

Editors

Mohd. Mustafa Albakri Abdullah

Muhammad Mahyiddin Ramli

Shayfull Zamree Abd Rahim

Siti Salwa Mat Isa

Mohd Nasir Mat Saad

Rizalafande Che Ismail

Mohd Fathullah Ghazli

Universiti Malaysia Perlis, Perlis, Malaysia

Sponsoring OrganizationsMalaysia Research and Innovation Society (MyRIS)Center of Excellence Geopolymer and Green Technology, Universiti Malaysia Perlis

School of Microelectronic Engineering, Universiti Malaysia Perlis

All papers have been peer reviewed.

AIPPublishing

Melville, New York, 2017AIP Conference Proceedings Volume 1885 B

To learn more about AIP Conference Proceedings visit http://proceedings.aip.org

PART B

Feedstock for ruminant, non-ruminant and aquatic fish in Malaysia-A review

A. M. Leman, Syafiq Muzarpar, I. Baba, N. M Sunar, and R. Abdul Wahab 020155

Warpage optimisation on the moulded part with straight-drilled and conformal cooling channels

using response surface methodology (RSM) and genetic algorithm (GA) optimisation approaches

M. H. M. Hazwan, Z. Shayfull, S. Sharif, S. M. Nasir, and M. M. Rashidi 020156

Warpage optimisation on the moulded part with straight-drilled and conformal cooling channels

using response surface methodology (RSM) and glowworm swarm optimisation (GSO)

M. H. M. Hazwan, Z. Shayfull, S. Sharif, S. M. Nasir, and N. Zainal 020157

The development of mixer machine for organic animal feed production: Proposed study

A. M. Leman, R. Abdul Wahab, Supaat Zakaria, Dafit Feriyanto, M. I. F. Che Mohd Nor,

and Syafiq Muzarpar020158

Evaluation of tensile properties and water absortion of cassava starch film

R. Justin Walster, A. R. Rozyanty, A. W. M. Kahar, L. Musa, and S. B. S. Shahnaz 020159

Effect of growth times on the physical and mechanical properties of hydrophobic

and oleophilic silylated bacterial cellulose membranes

Zakaria M. N., Sukirah A. R., Maizatulnisa O., Ayuni J., Khalisanni K., and R. Rosmamuhamadani 020160

A comparison RSM and ANN surface roughness models in thin-wall machining ofTi6AI4V

using vegetable oils under MQL-condition

Amrifan Saladin Mohruni, Muhammad Yanis, Safian Sharif, Irsyadi Yani, Erna Yuliwati,

Ahmad Fauzi Ismail, and Zamree Shayfull 020161

Synergistic effect of nano calcium carbonate (NCC)/carbon black (CB) on the cure characteristics

and physico-mechanical properties of NR/SBR blends

Siti Nur Liyana Mamauod, Ahmad Zafir Romli, and Mohd Ismail Rifdi Rizuan 020162

Forecasting of primary energy consumption data in the United States: A comparison between ARIMA

and Holter-Winters models

A. Rahman and A. S. Ahmar 020163

The influence of synthesis routes and curing time on the mechanical and microstructure properties

of class C fly ash geopolymers

Kharisma Noor Aflfah, Nursyamsih Amalia, Syamsidar D., and Subaer 020164

Development of kenaf mat for slope stabilization

M. M. Ahmad, M. B. H. Ab Manaf, and N. Z. Zainol 020165

Elastic interactions between single microcrack and single osteon microstructure of human

femur cortical bone

N. N. Mansor, R. Daud, K. S. Basaruddin, F. Mat, Y. Bajuri, and A. K. Ariffin 020166

Convergence study of global meshing on enamel-cement-bracket finite element model

S. F. Samshuri, R. Daud, M. A. Rojan, K. S. Basaruddin, A. B. Abdullah, and A. K. Ariffin 020167

Effect of meshing element on J-integral value for homogenous crown fracture behavior

K. Khasnulhadi, R. Daud, F. Mat, K. S. Basaruddin, M. H. Sulaiman, and A. K. Ariffin 020168

Optimal injection process parameter analysis for front panel housing using response surface

methodology

N. A. Zakaria, M. Z. Azlan, Z. Shayfull, S. Roselina, and S. M. Nasir 020169

The relationship between Vickers microhardness and compressive strength of functional surface

geopolymers

Subaer, Januari Jaya Ekaputri, Hamzah Fansuri, and Mustafa Al Bakri Abdullah 020170

Potential of soil liquefaction at Perlis, northern region of Malalysia

Zuhayr Md Ghazaly, Mustaqqim Abdul Rahim, Mohamad Amzar Bin Mhd Nasir, Nur Fitriah Isa,

Mohd Faiz Mohammad Zaki, Zulkarnain Bin Hassan, and Zul-Atfi Bin Ismail

Design and development of a freezer and chiller delivery box

Mohd Zakimi Zakaria, Goh Chung Hung, Mohd Syedi Imran Mohd Dawi, Radhwan Hussin,

Ahmad Nabil Mohd Khalil, Muhammad Khairy Md Nairn, and Ahmad Humaizi Hilmi

Design reinforced concrete structures: Differences in procedure, formula, and results between

Eurocode 2 and British Standard 8110

Mustaqqim Abdul Rahim, Lum Chui Ying, Shahiron Shahidan, Zuhayr Md. Ghazaly,

Shamilah Anudai, Nor Faizah Bawadi, Nur Fitriah Isa, Zulkarnain Hassan,

Afifuddin Habulat, and Zul-Atfi Ismail

Influence of local meshing size on stress intensity factor of orthopedic lag screw

M. N. Husain, R. Daud, K. S. Basaruddin, F. Mat, M. Y. Bajuri, and A. K. Arifin

Warpage minimization: Analysis using response surface methodology (RSM) and particle

swarm optimization (PSO) on thin part

A. Yasiin, M. Fathullah, Z. Shayfull, S. M. Nasir, M. H. M. Hazwan, M. Sazli, and Z. R. Yahya

Cycle time improvement for plastic injection moulding process by sub groove modification

in conformal cooling channel

K. Kamarudin, M. S. Wahab, Batcha M. F. M., Z. Shayfull, A. A. Raus, and Aqeel Ahmed

Stress analysis of a single osteon

A. A. Ismail, R. Daud, N. A. M. Amin, M. S. Abdul Majid, K. S. Basaruddin, and A. K. Junoh

A comparative study ofAverrhoabilimbi extraction method

H. I. Zulhaimi, I. R. Rosli, K. F. Kasim, H. Muhammad Akmal, M. A. Nuradibah, and S. T. Sam

Comparison ofrelaxation with counterpressure massage techniques for reduce pain first stage

of labor

U. F. Lisa, M. Jalina, and Marniati

A representation model for developing double-sided assembly line balancing model: An industrial

case study

M. F. M. A. Hamzas, S. A. Bareduan, M. Z. Zakaria, S. Ghazali, and S. Zairi

Optimization of lactic acid production from glucose using geobacillus stearothermophilus strain 15

Balakrishnan Kunasundari, Sandrasekaran Naresh, and Mohammad Farhan Mohd Safie

Validation of XI motorcycle model in industrial plant layout by using WITNESS simulation

software

M. F. M. A. Hamzas, S. A. Bareduan, M. Z. Zakaria, W. J. Tan, and S. Zairi

Implementation of ranked positional weight method (RPWM) for double-sided assembly line

balancing problems

M. F. M. A. Hamzas, S. A. Bareduan, M. Z. Zakaria, S. Ghazali, and S. Zairi

Improving the accuracy of rainfall forecasting using multivariate transfer function and resilient

backpropagation neural network

S. Annas and R. Arisandi

SEIR model simulation for Hepatitis B

Syafruddin Side, Irwan, Usman Mulbar, and Wahidah Sanusi

Comparative evaluation of physicochemical properties of jatropha curcas seed oil for

coolant-lubricant application

Muhamad Nasir Murad, Safian Sharif, Erween Abd. Rahim, and Rozaini Abdullah

Mechanical properties effect on molarity of epoxy hardener filled with geopolymer materials

for piping application: Flexural properties

Mohammad Firdaus Abu Hashim, Mohd Mustafa Al Bakri Abdullah, Che Mohd Ruzaidi Ghazali,

Kamarudin Hussin, and Mohammed Binhussain

The influence of synthesis routes and curing time on the mechanical and microstructure properties

of class C fly ash geopolymers

Kharisma Noor Afifah, Nursyamsih Amalia, Syamsidar D., Abdul Haris, and Subaer

Convergence and stress analysis of the homogeneous structure of human femur bone during

standing up condition

B. Izzawati, R. Daud, M. Afendi, M. S. Abdul Majid, and N. A. M. Zain

Worksite element as causes of occupational accidents and illnesses in Malaysian residential

construction industry

J. Mohd Hafiidz, K. Arifln, K. Aiyub, M. R. Razman, M. S. Samsurijan, and M. I. Syakir

Chemical composition and strength of dolomite geopolymer composites

E. A. Aizat, A. M. M. Al Bakri, Y. M. Liew, and C. Y. Heah

Fabrication of microfluidic integrated biosensor

Tijjani Adam, Th S. Dhahi, Mohammed Mohammed, U. Hashim, N. Z. Noriman,

and Omar S. Dahham

Lab-on-chip components for molecular detection


and Omar S. Dahham

Drug carrier in cancer therapy: A simulation study based on magnetic carrier substances


and Omar S. Dahham

Specific and selective target detection of supra-genome 21 Mers Salmonella via silicon nanowires

biosensor

Mohammad Razif Bin Mustafa, Th S. Dhahi, Nuri. A. K. H. Ehfaed, Tijjani Adam, U. Hashim,N. Azizah, Mohammed Mohammed, and N. Z. Noriman

Synthesis of zinc oxide thin films prepared by sol-gel for specific bioactivity

Tijjani Adam, B. Basri, Th. S. Dhahi, Mohammed Mohammed, U. Hashim, N. Z. Noriman,

and Omar S. Dahham 020197

SEIR model simulation for Hepatitis B

Syafruddin Side, Irwan, Usman Mulbar, and Wahidah Sanusi 020198

Overview of nanofluid application through minimum quantity lubrication (MQL) in metal cutting

process

Safian Sharif, Ibrahim Ogu Sadiq, Mohd Azlan Suhaimi, and Shayfull Zamree Abd Rahim 020199

Analysis on flexible manufacturing system layout using arena simulation software

M. K. Fadzly, Mohd Sazli Saad, and Z. Shayfull 020200

Study of the weathering effect in a natural environment on the hybrid kenaf bast/glass

fibre-filled unsaturated polyester composite

Mohammed Mohammed, A. R. Rozyanty, Tijjani Adam, and Bashir O. Betar 020201

Customer and performance rating in QFD using SVM classification

Syarizul Amri Dzulkifli, Mohd Najib Mohd Salleh, and A. M. Leman 020202

Effect on microstructure of nickel aluminum bronze by degassing addition

F. Syazwan, Kavinjr, S. Maghribi, N. Ashraf, A. Hadi, Z. Shayfull, and M. M. Rashidi 020203

Energy efficiency system development

A. M. Leman, K. A. Rahman, Haw Jie Chong, Mohd Najib Mohd Salleh, and M. Z. M. Yusof 020204

Speed limiter integrated fatigue analyzer (SLIFA) for speed and fatigue control on diesel engine

truck and bus

Haris Wahyudi, Hadi Pranoto, A. M. Leman, Darwin Sebayang, and I. Baba 020205

Reprogramming the articulated robotic arm for glass handling by using Arduino microcontroller

Zol Bahri Razali, Mohamed Mydin M. Abdul Kader, Mohd Asmadi Akmal Kadir,

and Mohd Hisam Daud 020206

Kinematics analysis on hinges of robot arm gripper for harmful chemical handling

Zol Bahri Razali, Mohamed Mydin M. Abdul Kader, Nurul Fahimah Mustafa,


Design and analysis on robotic arm for serving hazard container

Zol Bahri Razali, Mohamed Mydin M. Abdul Kader, Khoo Zera Yi, and Mohd Hisam Daud 020208

Design and analysis on sorting blade for automated size-based sorting device

Zol Bahri Razali, Mohamed Mydin M. Abdul Kader, Yasser Suhaimi Samsudin,


Performance analysis of single stage libr-water absorption machine operated by waste thermal

energy of internal combustion engine: Case study

Hafiz Zafar Sharif, A. M. Leman, Muthuraman S., Mohd Najib Mohd Salleh, and Supaat Zakaria 020210

Lattices parameter dependent on effective atomic interactive coefficient in nanostructure

Neesyan A/L David Rajah, Tijjani Adam, Th S. Dhahi, Mohammed Mohammed, U. Hashim,

N. Z. Noriman, and Omar S. Dahham

Calculation of the band structure parameter in silicon nanowires using first principle analytical method

Mohamed Jamal Bin Amanullah, Tijjani Adam, Th S. Dhahi, Mohammed Mohammed, U. Hashim,

N. Z. Noriman, and Omar S. Dahham

Warpage optimisation on thin shell part by using response surface methodology (RSM)

R. Norshahira, Z. Shayfull, S. M. Nasir, M. Fathullah, and M. H. M. Hazwan

Optimisation of warpage on thin shell part by using particle swarm optimisation (PSO)

R. Norshahira, Z. Shayfull, S. M. Nasir, S. M. Sazli Saad, and M. Fathullah

ZnO characterization, UV and photocatalysis mechanism for water repellent phenomena in polymer

poly composite

Mohammed Mohammed, A. R. Rozyanty, Tijjani Adam, and Bashir O. Betar

Optimization and validation of highly selective microfluidic integrated silicon nanowire chemical

sensor

Nuri. A KH Ehfaed, Shillan A. L. Bathmanathan, Th. S. Dhahi, Tijjani Adam, Uda Hashim,

and N. Z. Noriman

Warpage optimisation on the moulded part with straight-drilled and MGSS conformal cooling

channels using response surface methodology (RSM)

M. H. M. Hazwan, Z. Shayfull, S. Sharif, S. M. Nasir, and M. M. Rashidi

The effect of silica toward polymer membrane for water separation process

Mohd Riduan Jamalludin, M. U. Rosli, Muhammad Ikman Ishak, C. Y. Khor, Suhaimi Shahrin,

Ras Izzati Ismail, Lailina N. M., Leng Y. L., and H. Jahidi

Performance of steel wool fiber reinforced geopolymer concrete

Meor Ahmad Faris, Mohd Mustafa Al Bakri Abdullah, Khairul Nizar Ismail, Ratnasamy Muniandy,

and Nurliayana Ariffln

Effect of degassing addition on the solidification segregation of nickel aluminum bronze

F. Syazwan, M. Kavinjr, S. Maghribi, N. Ashraf, A. Hadi, Z. Shayfull, and M. M. Rashidi

Rice husk (RH) as additive in fly ash based geopolymer mortar

Zarina Yahya, Rafiza Abd Razak, Mohd Mustafa Al Bakri Abdullah, Mohd Azrin Adzhar Rahim,

and Armia Nasri

Effect of organo-montmorillonite addition on compressive properties of epoxy (DGEBA) using

isophorondiamine as curing agent

Yusrina Mat Daud, Kamarudin Hussin, Azlin Fazlina Osman, Che Mohd Ruzaidi Ghazali,and Mohd Mustafa Al Bakri Abdullah

Performance of fly ash based geopolymer incorporating palm kernel shell for lightweight concrete

Rafiza Abd Razak, Mohd Mustafa Al Bakri Abdullah, Zarina Yahya, Ang Zhi Jian, and Armia Nasri

Correlation between hardness and water absorption properties of Saudi kaolin and white clay

geopolymer coating

Shamala Ramasamy, Mohd Mustafa Al Bakri Abdullah, Yue Huang, Kamarudin Hussin, Jin Wang,and Noor Fifmatasha Shahedan 020224

Composition, physical properties and drying characteristics of seed oil of Citrullus lanatus

S. A. Idris, A. R. Rashidi, A. Muhammad, M. Abdullah, O. S. J. Elham, and M. S. Mamat 020225

Different carbonization process of bamboo charcoal using Gigantochloa Albociliata

S. S. M. Isa, M. M. Ramli, D. S. C. Halin, N. A. M. Anhar, and N. A. M. A. Hambali 020226

Graphitization of oil palm trunk chip with controlled heating condition

N. A. Karim, C. M. R. Ghazali, M. M. Ramli, D. S. C. Halin, and I. Nainggolan 020227

Reduced-graphene oxide in flexible substrate for wearable physiological sensor - A review

N. A. M. Anhar, M. M. Ramli, D. S. C. Halin, S. S. M. Isa, N. A. M. A. Hambali,

and M. M. A. B. Abdullah 020228

Morphology-Property relationship of high density Polyethylene/Hevea Brasiliensis Leaves/Imperata

cylindrica hybrid composite: Impact strength

A. R. Rashidi, A. Muhammad, and A. Roslan 020229

Development of bio based plastic materials for packaging from soybeans waste

A. Muhammad, A. R. Rashidi, A. Roslan, and S. A. Idris 020230

Ethanolic extract of propolis for biodegradable films packaging enhanced with chitosan

M. I. Ismail, A. Roslan, N. S. Saari, K. H. Hashim, and M. R. Kalamullah 020231

Information fusion of palmprint image for human identification

S. N. W. M. Zuki, M. I. Ahmad, M. N. M. Isa, and R. Ngadiran 020232

Evaluation of mirror full adder circuit reliability performance due to negative bias temperature

instability (NBTI) effects based on different defect mechanisms

I. B. Shaari, M. F. Zainudin, M. S. A. Saini, H. Hussin, and A. K. Halim 020233

La0 6Sr0 4Co0 2Fe0 803_5 (LSCF64) perovskite nanotubes via sol-gel template synthesis

A. S. Habiballah, I. Ismail, N. Osman, and A. M. M. Jani 020234

Electrical DNA biosensor using aluminium interdigitated electrode for E.Coli 0157:H7 detection

N. Z. Natasha, R. D. A. A. Rajapaksha, M. N. A. Uda, and U. Hashim 020235

Ultra-low current biosensor output detection using portable electronic reader

N. A. N. Yahaya, R. D. A. A. Rajapaksha, M. N. Afnan Uda, and U. Hashim 020236

Design and fabricate multi channel microfluidic mold on top of glass slide using SU-8

N. A. N. Azman, R. D. A. A. Rajapaksha, M. N. A. Uda, and U. Hashim 020237

Optimized smith waterman processor design for breast cancer early diagnosis

D. S. Nurdin, M. N. Isa, R. C. Ismail, and M. I. Ahmad 020238

Simulation of unipolar planar device with asymmetrical barrier profile: A planar barrier diode

Z. Zailan, S. R. Kasjoo, N. Fa Zakaria, M. M. Isa, M. K. M. Arshad, and S. Taking

Comparison of encryption techniques between chaos theory and password for wireless power

transfer system: A review

N. H. Hussin, M. M. Azizan, A. Ali, and M. A. M. Albreem

Performance power evaluation of DC fan cooling system for PV panel by using ANSYS CFX

Z. Syafiqah, N. A. M. Amin, Y. M. Irwan, M. Irwanto, W. Z. Leow, and A. R. Amelia

The security energy encryption in wireless power transfer

M. N. Sadzali, A. Ali, M. M. Azizan, and M. A. M. Albreem

Colloids removal from water resources using natural coagulant: Acacia auriculiformisM. Abdullah, A. Roslan, M. F. H. Kamarulzaman, and M. M. Erat

Graft copolymerization of acrylonitrile onto recycled newspapers cellulose pulp

N. A. Awang, W. N. W. Salleh, H. Hasbullah, N. Yusof, F. Aziz, J. Jaafar, and A. F. Ismail

Potential of roselle and blue pea in the dye-sensitized solar cell

S. Dayang, M. Irwanto, N. Gomesh, and B. Ismail

Biogas production from pineapple core - A preliminary study

O. S. Jehan, S. N. A. Sanusi, M. Z. Sukor, M. Noraini, M. M. H. S. Buddin, and K. H. K. Hamid

The effect of isocyanate structure on ionic conductivity of waste cooking oil based polyurethane

solid polymer electrolyte

N. A. Kamarulzaman and S. M. Tahir

Design of aquaponics water monitoring system using Arduino microcontroller

S. A. Z. Murad, A. Harun, S. N. Mohyar, R. Sapawi, and S. Y. Ten

Design of 5 V DC to 20 V DC switching regulator for power supply module

N. A. Azmi, S. A. Z. Murad, A. Harun, R. C. Ismail, M. N. M. Isa, and M. A. Zulkifeli

Single lump breast surface stress assessment study

R. Vairavan, N. R. Ong, Z. Sauli, S. Kirtsaeng, S. Sakuntasathien, P. Paitong, J. B. Alcain, S. L. Lai,

and V. Retnasamy

Fringe projection application for surface variation analysis on helical shaped silicon breast

R. Vairavan, N. R. Ong, Z. Sauli, M. M. Shahimin, S. Kirtsaeng, S. Sakuntasathien, J. B. Alcain,

P. Paitong, and V. Retnasamy

3D silicon breast surface mapping via structured light profilometry

R. Vairavan, N. R. Ong, Z. Sauli, S. Kirtsaeng, S. Sakuntasathien, M. M. Shahimin, J. B. Alcain,S. L. Lai, P. Paitong, and V Retnasamy

Heat dissipation investigation of the internal heat sink geometry of a commercial available LED lampS. L. Lai, N. R. Ong, S. Kirtsaeng, S. Sakuntasathien, J. B. Alcain, Z. Sauli, K. Thangsi,and V. Retnasamy

Thermal study of LED chip arrangement on MCPCB

S. L. Lai, N. R. Ong, M. M. Shahimin, S. Kirtsaeng, S. Sakuntasathien, J. B. Alcain, R. Vairavan,

Z. Sauli, K. Thangsi, and V. Retnasamy 020254

LED heat dissipation study of selected shape of MCPCB

S. L. Lai, N. R. Ong, M. M. Shahimin, S. Kirtsaeng, S. Sakuntasathien, J. B. Alcain, R. Vairavan,

Z. Sauli, K. Thangsi, and V. Retnasamy 020255

Die attach dimension and material on thermal conductivity study for high power COB LED

K. Sarukunaselan, N. R. Ong, Z. Sauli, N. Mahmed, S. Kirtsaeng, S. Sakuntasathien, S. Suppiah,

J. B. Alcain, and V. Retnasamy 020256

An overview of self-switching diode rectifiers using green materials

Shahrir Rizal Kasjoo, Zarimawaty Zailan, Nor Farhani Zakaria, Muammar Mohamad Isa,

Mohd Khairuddin Md Arshad, and Sanna Taking 020257

The production of Malaysia bamboo charcoal (Gigantochloa albociliata) as the potential absorbent

Siti S. Mat Isa, Muhammad M. Ramli, N. A. M. A. Hambali, M. M. A. B. Abdullah,

and S. A. Z. Murad 020258

Single wall carbon nanotubes dispersion study of different dye molecules and chitosan

Muhammad M. Ramli, Siti S. Mat Isa, M. M. A. B. Abdullah, and S. A. Z. Murad 020259

Characterization analysis for leaves of Leucaena leucocephala by using phytochemical screening assay

Z. Zarina, C. M. R. Ghazali, and S. T. Sam 020260

Study of double porous silicon surfaces for enhancement of silicon solar cell performance

N. S. M. Razali, A. F. A. Rahim, R. Radzali, and A. Mahmood 020261

Thermal conductivity on stud bump interconnection of high power COB LED

K. Sarukunaselan, N. R. Ong, Z. Sauli, N. Mahmed, S. Kirtsaeng, S. Sakuntasathien, S. Suppiah,

J. B. Alcain, and V. Retnasamy 020262

A review: Application of adhesive bonding on semiconductor interconnection joints

Sarveshvaran Suppiah, Nestor Rubio Ong, Zaliman Sauli, Karunavani Sarukunaselan,

Jesselyn Barro Alcain, Mukhzeer Mohamad Shahimin, and Vithyacharan Retnasamy 020263

A review on solder reflow and flux application for flip chip


Jesselyn Barro Alcain, Susthitha Menon Visvanathan, and Vithyacharan Retnasamy 020264

A crunch on thermocompression flip chip bonding


Jesselyn Barro Alcain, Norsuria Mahmed, and Vithyacharan Retnasamy 020265

A short review on thermosonic flip chip bonding


Jesselyn Barro Alcain, Mukhzeer Mohamad Shahimin, and Vithyacharan Retnasamy 020266

Decolourization of methyl orange using iron- immobilize MKSF in UV assisted Fenton-like

reaction

N. H. Abdullah, N. A. Zubir, and H. Hassan

Process parameter and surface morphology of pineapple leaf electrospun nanofibers (PALF)

S. N. Surip, F. M. A. Aziz, N. N. Bonnia, K. A. Sekak, and M. N. Zakaria

Effect of metal ratio and calcination temperature of chromium based mixed oxides catalyst

on FAME density from palm fatty acid distillate

Z. Wan, S. Fatimah, S. Shahar, and A. C. Noor

Circuit development of FGMOS in operational amplifier for low voltage low power applications:

A review

F. A. S. Musa, D. Nurulain, N. Ahmad, M. Mohamad Isa, and Muhammad M. Ramli

Effect of calcination temperature on the structure and catalytic performance of 80Ni20CO/SiO2

catalyst for COz methanation

S. A. Md Ali, K. H. K. Hamid, and K. N. Ismail

Modelling of fluoride removal via batch monopolar electrocoagulation process using aluminium

electrodes

N. Amri, M. I. Hashim, N. Ismail, F. S. Rohman, and N. A. A. Bashah

Multi-bit per cell magnetic random access memory based on spin torque oscillator

Rachid Sbiaa

Ergonomics study on mobile phones for thumb physiology discomfort

J. M. S. Bendero, M. E. R. Doon, K. C. A. Quiogue, L. C. Soneja, N. R. Ong, Z. Sauli,

and R. Vairavan

Interdigitated electrodes as impedance and capacitance biosensors: A review

N. S. Mazlan, M. M. Ramli, M. M. A. B. Abdullah, D. S. C. Halin, S. S. M. Isa, L. F. A. Talip,

N. S. Danial, and S. A. Z. Murad

Analysis of sulfidic linkages formed in natural rubber latex medical gloves by using X-ray

absorption near edge structure

M. Chankrachang, W. Limphirat, R Yongyingsakthavorn, U. Nontakaew, and A. Tohsan

Design of robotic leg and physiotherapy (ROLEP) assist with interactive game

A. F. Hasan, M. F. Che Husin, M. N. Hashim, K. A. Rosli, F. R. A. Roslim, and A. F. Z. Abidin

Microvalve-based microfluidic device for C. elegans manipulationS. Johari, V. Nock, M. M. Alkaisi, and W. Wang

The heating effect on different light emitting diodes chips materials

K. K. Chu, N. A. M. A. Hambali, S. N. Ariffin, M. H. A. Wahid, M. M. Shahimin,and Norshamsuri Ali

Role of temperature on colloidal behavior of gold nanoparticles dispersed in organic and aqueous

media

N. A. A. Bashah, E. Awel, N. Amri, R. Alrozi, N. Yaakob, N. A. Zubir, and M. S. Osman 020281

Qualitative comparison of active compounds between red and green Mariposa Christia

Vespertillonis leaves extracts

M. S. Osman, Z. A. Ghani, N. F. Ismail, N. A. A. Razak, J. Jaapar, and M. A. M. Ariff 020282

Studies on the uniformity and hexagonality of anodic aluminum oxide by image analysis methods

K. Khowamnuaychok, C. Luangchaisri, I. Chatnuntawech, and C. Muangphat 020283

Emission rate and internal quantum efficiency enhancement in different geometrical shapes

of GaN LED

S. Rashid, M. H. A. Wahid, N. A. M. Ahmad Hambali, N. S. A. Abdul Halim, M. M. Ramli,

and M. M. Shahimin 020284

P-type surface effects for thickness variation of 2um and 4um of n-type layer in GaN LED

N. S. A. Abdul Halim, M. H. A. Wahid, N. A. M. Ahmad Hambali, S. Rashid, M. M. Ramli,

and M. M. Shahimin 020285

Review of mixer design for low voltage - low power applications

D. Nurulain, F. A. S. Musa, M. Mohamad Isa, N. Ahmad, and S. R. Kasjoo 020286

Design of anti-theft/cable cut real time alert system for copper cable using microcontroller

and GSM technology

E. K. Lim, M. N. Norizan, I. S. Mohamad, M. N. M. Yasin, S. A. Z. Murad, N. A. Baharum,

and N. Jamalullail 020287

Simple Monte Carlo model with generalized carrier-trajectory tracking equations for prediction

of avalanche multiplication statistics in avalanche photodiodes with arbitrary electric field gradient

J. S. L. Ong, C. Charin, and J. H. Leong 020288

Microstructure modification and oxygen mobility of CeZr02 nanocrystal doped with Y and Fe metals

A. Hadi, M. N. A. Shah, K. N. Ismail, and A. B. Roslan 020289

Barium strontium titanate (BST) thin film analysis on different layer and annealing temperature

Y. C. Teh, N. R. Ong, Z. Sauli, J. B. Alcain, and V. Retnasamy 020290

Ceramic ball grid array package stress analysis

S. H. B. S. Badri, M. H. A. Aziz, N. R. Ong, Z. Sauli, J. B. Alcain, and V. Retnasamy 020291

Failure analysis on false call probe pins of microprocessor test equipment

L. W. Tang, N. R. Ong, I. S. B. Mohamad, J. B. Alcain, and V. Retnasamy 020292

Variation in heat sink shape for thermal analysis

C. M. Wong, M. H. B. A. Aziz, N. R. Ong, J. B. Alcain, and Z. Sauli 020293

Investigation of heat transfer on surface mount packages for different chip materials

N. Ramdzan, M. H. B. A. Aziz, N. R. Ong, J. B. Alcain, and Z. Sauli 020294

Mechanical harmonic effects investigation on wire bonding for adhesion integrity

M. H. Yeap, N. R. Ong, Z. Sauli, J. B. Alcain, and V. Retnasamy

PCBA depaneling stress minimization study

M. H. B. M. Darus, M. H. B. A. Aziz, N. R. Ong, J. B. Alcain, and V. Retnasamy

Test module development to detect the flase call probe pins on microeprocessor test equipment

L. W. Tang, N. R. Ong, I. S. B. Mohamad, J. B. Alcain, and V. Retnasamy

Dielectrophoretic separation of platelets for medical application

N. S. Ismail, N. R. Ong, M. H. A. Aziz, J. B. Alcai, and Z. Sauli

Investigation of micropump mechanism for medical application (blood transport application)

N. S. M. Piterah, N. R. Ong, M. H. A. Aziz, J. B. Alcain, W. M. W. N. Haimi, and Z. Sauli

Modelling of gecko foot for future robot application

A. Kamaruddin, N. R. Ong, M. H. A. Aziz, J. B. Alcain, W. M. W. N. Haimi, and Z. Sauli

Modelling of cantilever based on piezoelectric energy harvester

N. F. Rahim, N. R. Ong, M. H. A. Aziz, J. B. Alcain, W. M. W. N. Haimi, and Z. Sauli

Portable water quality monitoring system

N. B. Nizar, N. R. Ong, M. H. A. Aziz, J. B. Alcain, W. M. W. N. Haimi, and Z. Sauli

TCAD in CTF parameter study of SOI tunnelling FET using full factorial design

A. X. Teh, N. R. Ong, M. H. A. Aziz, J. B. Alcain, W. M. W. N. Haimi, and Z. Sauli

Thermal microactuator dimension analysis

N. D. Azman, N. R. Ong, M. H. A. Aziz, J. B. Alcain, W. M. W. N. Haimi, and Z. Sauli

Underwater detection by using ultrasonic sensor

S. A. A. Bakar, N. R. Ong, M. H. A. Aziz, J. B. Alcain, W. M. W. N. Haimi, and Z. Sauli

Mitigation of landslide area around railway tunnel, South Sumatra Province, Indonesia

M. Taufik Toha, Dedi Setiabudidaya, Syamsul Komar, Bochori, Moamar A. Ghadafi,

Mirza Adiwarman, and S. E. Rahim

Growth and yield of rice submergence stress conditions in two types of swampy lowland

of South Sumatera

Gribaldi, Nurlaili, E. Danial, and S. E. Rahim

The decrease of cylindrical pempek quality during boiling

R. Kameta and N. F. Gultom

Nutrient uptake of NPK and result of some rice varieties in tidal land by using combination

of organic and inorganic fertilizer

Neni Marlina, Joni Phillep Rompas, Marlina, and Musbik

Infection of some cayenne pepper varieties (Capsicum frustescens L.) by Tobacco mosaic virus

at different growth stages

N. Damiri, I. S. Sofita, T. A. Effend, and S. E. Rahim 020310

Designing algorithm visualization on mobile platform: The proposed guidelines

A. A. Supli and N. Shiratuddin 020311

Suitability evaluation tool for lands (rice, corn and soybean) as mobile application

S. E. Rahim, A. A. Supli, and N. Damiri 020312

3rd electronic and green ; b

Documents