1

3D Printed items for the reloader

First, a little about me: I am a disabled and retired vet of the US Army. I am a reloader and a sport

shooter (mostly trap).

My Reloading room is also my printing room.

All parts I make are made of PLA (polylactic acid) which is made from vegetable oils and natural

substances.

My Factory:

2

Tool Head Holders for the Dillon Square Deal Press (Caliber Specific) Also available without the

caliber. $10.00 ea.

Simple tool head holder for the 550. Can be mounted to wall or pegboard using screws or bolts.

$10.00 ea.

3

The caliber conversion holder holds the tool head with dies and powder measure and also has room

for the powder funnel, locator buttons, shell plate and case gage or other accessory. $12.50 ea.

The primer catcher I make is a little taller than the original and is available with or without a hose

attachment. $5.00 ea.

4

Basic tool head stand holds the tool head with or without dies and other items. $5.00 ea. Also

available for the 650. $7.50 ea.

This holder will hold 6 shell plates and 6 sets of locator buttons. $10.00 ea.

5

Basic tool head holder for the 650 holds the tool head with or without dies, powder measure and

other items. $10.00 ea.

It also has a place for the shell plate and the locator buttons.

The caliber conversion holder holds the tool head with or without dies and accessories and also has

room for the shell plate, locator buttons, case gauge and case feeder parts. $12.50 ea.

6

Tool head and caliber conversion stand for both 550 (pictured) and 650. Same as the holder, but for

bench or shelf. $12.50 ea.

Spent primer chute, 2 styles to choose from. $1.00 ea.

This holder will hold 6 shell plates and 6 sets of locator buttons. $10.00 ea.

7

I also have these available for both the 550 and 650 tool heads. They can be wall or pegboard

mounted or sit on the bench or shelf. $12.50 ea.

Accessories for general purpose (not model specific)

This powder funnel will hold a Dillon caliber specific powder funnel just like the factory powder

measure die. Used for charging shells manually if you need to trickle each charge. $7.50 Ea.

8

The powder measure die works just like the factory model. $5.00 ea.

Primer tube holders are either pegboard (left) or wall/pegboard (right) and hold 10 full or empty

primer tubes. $4.00 ea.

9

I also have a primer system changeover holder for the 650 primer system. $5.00 ea.

Powder measure knob makes it a little easier to turn that adjusting screw on the Dillon powder

measure. $1.00 ea.

The bin dam. Gives the bin more capacity. $2.00 ea.

10

This is an adapter to attach a Lee case collator to the Dillon 650 series press. $4.00 ea.

If you have one of those Lee case collators, this clip Helps keep the plastic tubes spaced evenly to aid

in removing/replacing the funnel and/case block. I recommend 2 (one on each end. $1.00 ea.

11

I have 2 sizes of funnel. The smaller one is perfect for pouring powder back into 1 pound powder

bottles. $10.00 ea.

The larger one fits the Dillon powder measure AND modern 8 pound powder kegs. $12.50 ea.

I have dust covers for each of the funnels, for those that just want to leave the funnel in place. $1.50

for the small and $2.50for the large.

12

Powder measure holders are available in pegboard only (left and wall/pegboard (right) and will hold

a full or empty Dillon powder measure. $5.00 ea.

Bullet/powder separator. Fits the top of the Dillon powder measure or sits inside the powder

measure funnel and the poder bottle funnel. $5.00 each. I also have a dust cover for this, $1.00

Case feeder/bullet feeder plate holders. If you have multiple plates for these accessories, this allows

them to be stored on pegboard or wall mount. $10.00 set of 3

13

This item, the parts tray as I call it, holds the changeover sets for the bullet and/or case feeders.

$12.50 each

Locator button tabs make it easier to handle the pins. $1.00 set of 3.

Numbers 1-4 Locator buttons with built-in tabs. $1.00 per set of 3.

14

The strong mount bullet tray. $10.00 ea.

This is a bullet tray for the Inline Fabrication mount. Shown here with 100 .30 caliber rifle bullets.

$15.00

15

Need an out-of-the-way place to store your beam-style or electronic scale? This can mount on a wall

or pegboard and will keep that scale out of the way until you need it. $15.00 ea.

I also have a variety of reloading trays. Prices vary depending on size.

.223/5.56 $5.00

9mm/.380 $6.00

.38/.357 $6.00

All larger $7.50

Any caliber you want, just let me know what it is and I will make to fit.

16

Turret holder for the Lee Loadmaster $7.50 each

Primer funnel for the Lee Auto Prime system trays. $4.00 each

Inserts for the Dillon Super Swage. Available in .223 and .308 $1.00 each

17

2 piece primer flip tray. $5.00 each (for both pieces)

Spent primer cup for SOME Dillon 650 models. $7.50 each

18

*NEW*

Plastic replacement parts for the primer pickup tubes. Both ends available for both large and small.

$1.00 each piece. (clips and tubes not included)

Live primer chute for the Dillon 650.

$6.00

19

Contact me on Facebook (Karl Bibb) and PM me to order, or e-mail

me.

I take PayPal (Choose the “Send to a Friend” option, please, or add

5% for fees.) or Postal money order.

PayPal and e-mail address is wildcard97@comcast.net

Shipping is subject to size and/or weight

Orders of $100.00 or more get free shipping.

Keep in mind that large orders may have to be printed and will

take time. I strive to have stuff ready, but things happen!!

I provide USPS tracking for every shipment larger than button tabs.

All parts guaranteed to perform as described or a

refund/replacement will be provided.

I can also do custom work and have other colors available.

Thank you for your interest.

mailto:wildcard97@comcast.net