3bk%2d17429%2d9089%2drjzza %289359%2dnpo software replacement %28intra muse kernel%29 01%2e15...
TRANSCRIPT
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
1/69
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
2/69
Wireless Service Provider Solutions
Alcatel-Lucent 9359 Network Performance Optimizer
Software Replacement (Intra Muse Kernel)Document number: 3BK-17429-9089-RJZZADocument issue: 01.15/ENDocument status: StandardProduct release: OAM 5.2Date: June 2009
Alcatel-Lucent - Internal - Proprietary - Use pursuant to Company instruction
Copyright 2004-2008 Alcatel-Lucent, All Rights Reserved
UNCONTROLLED COPY: The master of this document is stored on an electronic database and is "writeprotected"; it may be altered only by authorized persons. While copies may be printed, it is notrecommended. Viewing of the master electronically ensures access to the current issue. Any hardcopiestaken must be regarded as uncontrolled copies.
ALCATEL-LUCENT CONFIDENTIAL: The information contained in this document is the property ofAlcatel-Lucent. Except as expressly authorized in writing by Alcatel-Lucent, the holder shall keep allinformation contained herein confidential, shall disclose the information only to its employees with a needto know, and shall protect the information from disclosure and dissemination to third parties. Except asexpressly authorized in writing by Alcatel-Lucent, the holder is granted no rights to use the informationcontained herein. If you have received this document in error, please notify the sender and destroy itimmediately.
Alcatel-Lucent, Alcatel, Lucent Technologies and their respective logos are trademarks and service marksof Alcatel-Lucent, Alcatel and Lucent Technologies.
Oracle is a registered trademark of Oracle Corporation and/or its affiliates.
All other trademarks are the property of their owners.
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
3/69
PUBLICATION HISTORYSYSTEM RELEASE NPO 5.2 (M2.3)
June 2009
Issue 01.15/EN, Standard
Resolution of FR: 3BKA85FBR279358
October 2008
Issue 01.14/EN, Standard
Update of Schedule section
September 2008
Issue 01.13/EN, Standard
Update of Import Dictionaries
September 2008
Issue 01.12/EN, Standard
Update of Backup and Restore procedures
September 2008
Issue 01.11/EN, Standard
Update of Start NPO Application procedure
September 2008
Issue 01.10/EN, Standard
Update after internal review
Resolution of FR 3BKA85FBR251522
July 2008Issue 01.09/EN, Standard
Update for server in cluster configuration
June 2008
Issue 01.08/EN, Standard
Update ofStart NPO Client Applicationprocedure.
Improvement of the procedure
Publication history 3
Copyright 2004-2008 Alcatel-Lucent Software Replacement (Intra Muse Kernel)
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
4/69
June 2008Issue 01.07/EN, Preliminary
Update of the cluster configuration section
April 2008
Issue 01.06/EN, Preliminary
Improvement of the procedure
March 2008
Issue 01.05/EN, Draft
Improvement of the procedure
February 2008
Issue 01.04/EN, Draft
Improvement of the procedure
December 2007
Issue 01.03/EN, Draft
Improvement of the procedure
November 2007
Issue 01.02/EN, Draft
Add the CD2P and Oracle sections
October 2007
Issue 01.01/EN, Draft
Creation of the document
Publication history 4
3BK-17429-9089-RJZZA 01.15/EN Standard June 2009 Copyright 2004-2008 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
5/69
1 About this Publication................................................................................................................................................... 7
2 UMTS Access Network Collection Roadmap...............................................................................................................8
3 New in This Release.......................................................................................................................................................9
4 Overview....................................................................................................................................................................... 10
4.1 Before You Start....................................................................................................................................................... 11
4.2 Initial Status.............................................................................................................................................................. 12
4.3 Final Status...............................................................................................................................................................13
4.4 Schedule..................................................................................................................................................................14
4.5 Impact on Service...................................................................................................................................................15
4.6 Restrictions.............................................................................................................................................................16
4.7 Supplies, Tools and Documentation.........................................................................................................................17
4.7.1 Supplies..............................................................................................................................................................18
4.7.2 Tools...................................................................................................................................................................19
4.7.3 Documentation................................................................................................................................................... 20
4.8 Conventions............................................................................................................................................................21
5 PI01 - Upgrade Server in non Cluster Configuration................................................................................................ 22
5.1 Initial Tasks on Server............................................................................................................................................23
5.1.1 Perform a Full Backup.................................................................................................................................. 24
5.1.2 Check Active Instance.................................................................................................................................. 26
5.1.3 Stop Processes.............................................................................................................................................27
5.2 Perform Software Upgrade.................................................................................................................................... 28
5.2.1 Upgrade CD1................................................................................................................................................29
5.2.2 Upgrade CD2S............................................................................................................................................. 30
5.2.3 Upgrade CD2P............................................................................................................................................. 32
5.2.4 Upgrade ORACLE........................................................................................................................................ 34
5.2.5 Upgrade CD3S............................................................................................................................................. 38
5.2.6 Upgrade CD4................................................................................................................................................41
5.2.7 Upgrade Generic Documentation................................................................................................................. 43
5.2.8 Start the Application......................................................................................................................................45
5.2.9 Import Dictionaries........................................................................................................................................47
5.3 Post Upgrade Tasks................................................................................................................................................. 49
5.4 Upgrade NPO Client Application.............................................................................................................................. 51
5.4.1 Uninstall Client Software.................................................................................................................................... 52
5.4.2 Start NPO Client Application.............................................................................................................................. 54
5.5 Remove Old Instance............................................................................................................................................... 56
Table of contents 5
Copyright 2004-2008 Alcatel-Lucent Software Replacement (Intra Muse Kernel)
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
6/69
6 Reverse Procedure.......................................................................................................................................................57
7 PI02 - Upgrade Server in Cluster Configuration........................................................................................................58
7.1 Initial Tasks on Server............................................................................................................................................59
7.1.1 Perform a Full Backup.................................................................................................................................. 60
7.1.2 Check Active Instance.................................................................................................................................. 62
7.1.3 Stop Processes.............................................................................................................................................63
7.2 Perform Software Upgrade.......................................................................................................................................64
7.3 Post Upgrade Tasks................................................................................................................................................. 66
Table of contents 6
3BK-17429-9089-RJZZA 01.15/EN Standard June 2009 Copyright 2004-2008 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
7/69
1 About this PublicationThis document describes how to perform a software upgrade from MS-OMC Portal/9359-NPO
software version "N" to MS-OMC Portal/9359-NPO software version "N+m" on Server and Client
configurations with the same hardware (based on MUSE 2.3). This document covers both cluster and
non-cluster configurations.
Audience
This document is intended for:
Field service technicians
Project managers
Site administrators
System support engineers (specialists)
Occasional users (e.g. subcontractors).
Prerequisites
You must have a basic understanding of the following:
ALCATEL-LUCENT operations and maintenance concepts.
Solaris 10 administration
Oracle 10g administration
Installation tools and materials
Safety Instructions.
7
Copyright 2004-2008 Alcatel-Lucent Software Replacement (Intra Muse Kernel)
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
8/69
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
9/69
3 New in This ReleaseThe following sections detail what is new or updated in NPO software replacement for a same
hardware (OAM 5.2 based on Muse 2.3).
New Sections
PI02 - Upgrade Server in Cluster Configuration
Modified Sections
Schedule
Perform a Full Backup
Post Upgrade Tasks
Reverse Procedure
Import Dictionaries
Start NPO Client Application
9
Copyright 2004-2008 Alcatel-Lucent Software Replacement (Intra Muse Kernel)
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
10/69
4 OverviewThis Overview provides general information about this procedure.
ATTENTIONDuring the whole procedure, consult the appropriate and most recent ReleaseNote according to your configuration, cluster or non-cluster: refer to the [5]External Release Notes for 9359 NPO OAM5.2 & OAM6.0K to apply additionalcommands if needed.
10
3BK-17429-9089-RJZZA 01.15/EN Standard June 2009 Copyright 2004-2008 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
11/69
4.1 Before You StartBefore starting the migration, perform the following checks:
Check that the customer has been informed about the operations:
date
time
site name
site address
purpose of the operation has been indicated
Check that human resources are available and complete for the operation. Check that tools and supplies are available and complete for the operation.
Check that the documentation is available and complete.
See theUpgrade CD1
11
Copyright 2004-2008 Alcatel-Lucent Software Replacement (Intra Muse Kernel)
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
12/69
4.2 Initial StatusBefore starting, ensure that:
The MS-OMC Portal/9359-NPO software is installed and running.
Several WMS data sources are declared on NPO Server.
A full backup of the MS-OMC Portal/9359-NPO Server has been made.
12
3BK-17429-9089-RJZZA 01.15/EN Standard June 2009 Copyright 2004-2008 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
13/69
4.3 Final StatusAt the end of the upgrade, you can check:
The MS-OMC Portal/9359-NPO newer software is installed and running.
The same WMS data sources are declared on NPO Server.
A full backup of the MS-OMC Portal/9359-NPO Server has been made.
13
Copyright 2004-2008 Alcatel-Lucent Software Replacement (Intra Muse Kernel)
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
14/69
4.4 ScheduleThe following table displays the time required to perform the different tasks. It depends on the CD to
install
PI No. PI Titles Time
PI 01 Upgrade Server in noncluster configuration
from 7h to 11h(Depending on configura-tion)
PI 02 Upgrade Server in clusterconfiguration
In Master node: from 7h to 11h
In Slave node: around 3h
(Depending on configuration)
14
3BK-17429-9089-RJZZA 01.15/EN Standard June 2009 Copyright 2004-2008 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
15/69
4.5 Impact on ServiceNone.
The NPO service is unavailable during the upgrade. At the end of the upgrade, all the remaining
NPO data are retrieved from WMS.
Therefore, there is no loss of NPO data.
15
Copyright 2004-2008 Alcatel-Lucent Software Replacement (Intra Muse Kernel)
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
16/69
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
17/69
4.7 Supplies, Tools and DocumentationThis section provides information about:
Supplies
Tools
Documentation
17
Copyright 2004-2008 Alcatel-Lucent Software Replacement (Intra Muse Kernel)
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
18/69
4.7.1 SuppliesA tape is needed to perform the full backup of NPO database.
18
3BK-17429-9089-RJZZA 01.15/EN Standard June 2009 Copyright 2004-2008 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
19/69
4.7.2 ToolsThe needed tools are listed below.
Item Version Case
CD1 CD-ROM, DVD-ROM, CD4CD-ROM, Generic Documenta-tion CD-ROM
The currently installed version onServer machine
Server
DVD-ROM (CD2S + CD3S) The new version, to be used at up-
grade procedure:
CD2S_MS_*
CD3S_MS_*
OMC_INST_*
Server
Client
CD4 CD-ROM CD4_NPO_M2* Server
CD-ROM for Generic CustomerDocumentation
Customer generic documentation Server
19
Copyright 2004-2008 Alcatel-Lucent Software Replacement (Intra Muse Kernel)
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
20/69
4.7.3 DocumentationThe needed applicable documentation is listed below.
No. Designation Reference
[1] Alcatel-Lucent 9359 Network Performance Op-timizer- Server and Client Installation
3BK 17429 9087 RJZZA
[2] 9953 MP / NPO Platform Administration Guide 3BK 21315 AAAB PCZZA
[3] Alcatel-Lucent 9359 Network Performance Op-timizer- Completion Check List
3BK 17429 9085 RJZZA
[4] Alcatel-Lucent 9359 Network Performance Op-
timizer- Service Reference Sheet
3BK 17429 9086 RJZZA
[5] External Release Notes for for 9359 NPOOAM5.2 & OAM6.0K
UMT/OAM/DJD/
NPO_W23xxxxxfile for a non-cluster
configuration
NPO_W23xxxxxCfor a cluster config-
uration
20
3BK-17429-9089-RJZZA 01.15/EN Standard June 2009 Copyright 2004-2008 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
21/69
4.8 ConventionsThe following conventions are used in the document:
Keyboard keys are indicated in the text as [XX]
System messages appear in bold font after a double left-oriented arrow:operator_input
For the axadmin user:
>>axadmin@host$ operator_input
Software buttons and icons on a terminal screen are also indicated in the text as [XX] .
Menu paths are chained with"->". Example:
Tools -> Options -> Printer -> ...
21
Copyright 2004-2008 Alcatel-Lucent Software Replacement (Intra Muse Kernel)
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
22/69
5 PI01 - Upgrade Server in non Cluster ConfigurationThis chapter describes the procedures to be followed for the MS-OMC Portal/9359-NPO Server
software replacement.
22
3BK-17429-9089-RJZZA 01.15/EN Standard June 2009 Copyright 2004-2008 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
23/69
5.1 Initial Tasks on ServerThree initial tasks has to be done before performing the software replacement in non cluster
configuration:
Perform a Full Backup
Check Active Instance
Stop Processes
23
Copyright 2004-2008 Alcatel-Lucent Software Replacement (Intra Muse Kernel)
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
24/69
5.1.1 Perform a Full BackupDifferent solutions are available to backup data before proceeding with the software replacement in
non-cluster configuration. Using one or the other depends on your hardware configuration. This can
be useful in case you need to restore data.
Note: This procedure takes at least 1h 30 on the server.
ATTENTION
All chapters indicated in this section refer to procedures detailed in thePlatform
Administration Guidedocument (3BK 21315 AAAA PCZZA)
Read also the appropriate and most recent Release Note: [5] External Release Notes
for NPO OAMx.x to apply additional commands if needed.
Solution 1 - Local backup using Oracle Secure Backup.
This solution allows a direct backup of Oracle DB files and user management data on a single tape
for:
N240 / DAT72
N240 / SDLT600
V490 (2 or 4 CPU) / SDLT600 devicesIf you choose this solution then:
Refer to the section7.1.4 - Tapes devicesto prepare the tape device
Perform the backup:
If the1 OSBoption has been chosen when generating the server profile at the serverinstallation, then theBACKUP_TYPEparameter has been automatically set toOSB value. Inthis case, refer to the section 7.3.2 - Perform Backup with OSB
If the2 Otheroption has been chosen when generating the server profile at the serverinstallation, then theBACKUP_TYPEparameter has been automatically set toNETWORKERvalue. In this case, you must firstly refer to the section 7.3.1 - Install the OSBSoftwarebefore referring to the section7.3.2 - Perform Backup with OSB.
Note: With the OSB solution, the Oracle Data Base must always run in ARCHIVELOG modewhichever the schedule of backup is. In another words, the offline backup performed while theOracle data Base is in NOARCHIVELOG mode is not supported by OSB scripts.
Solution 2 - Legato Centralized Backup
This solution allows a direct backup of Oracle DB files and user management data for the V490 (2 or
4 CPU) / SDLT600 device. Legato Networker must be installed on an external SUN server with at
least 1TByte of disk space and a gigabit Ethernet interface.
24
3BK-17429-9089-RJZZA 01.15/EN Standard June 2009 Copyright 2004-2008 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
25/69
If you choose this solution then:
Refer to the section7.2 - Configure Gb/s Network Interface for Backup Serverto configure the IPinterface device
Refer to the section7.4 - Legato Backup / Restore
If Legato Networker is not installed , refer to the section7.4.1 - Install Legato NetworkerServerto install and configure it.
If Legato Networker is installed, start from the section7.4.1.6 - Configure Legato Device fromLegato Clientto configure it.
Refer to the section7.4.2 - Perform Backup on Legato Clientto perform the backup
Note: With the Legato solution, the Oracle Data Base must always run in ARCHIVELOG modewhichever the schedule of backup is. In another words, the offline backup performed while theOracle data Base is in NOARCHIVELOG mode is not supported by Legato backup scripts.
25
Copyright 2004-2008 Alcatel-Lucent Software Replacement (Intra Muse Kernel)
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
26/69
5.1.2 Check Active InstanceNote: This procedure takes2 min .
Procedure
Step Action
1. Open a Terminal window as root.
2. Launch the Firefox browser from the command line:
>>cd /usr/local/firefox
>>./firefox
If an "Alert" pop-up window appears, click on [OK] .
3. Open the following URL address:
http:///osm/admin
4. In the prompt window:
Log in withosmadmin(default password: alcatel ).
Click on [OK].
Click on process monitoring.
Read System version / Instance.
Note down active instance number on a paper.
--End--
26
3BK-17429-9089-RJZZA 01.15/EN Standard June 2009 Copyright 2004-2008 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
27/69
5.1.3 Stop ProcessesNote: This procedure takes8 min.
Procedure
Step Action
1. Using the same firefox browser:
Click on "process monitoring". Clic on "Stop all".
2. Wait until the processes of NPO part and CoreServices part are stopped (orange leds)
--End--
27
Copyright 2004-2008 Alcatel-Lucent Software Replacement (Intra Muse Kernel)
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
28/69
5.2 Perform Software UpgradeThis section describes how to upgrade the software:
Upgrade CD1
Upgrade CD2S
Upgrade CD2P
Upgrade ORACLE
Upgrade CD3S
Upgrade CD4
Upgrade Generic Documentation Start the Application
Import Dictionaries
28
3BK-17429-9089-RJZZA 01.15/EN Standard June 2009 Copyright 2004-2008 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
29/69
5.2.1 Upgrade CD1
ATTENTION
See the [5] External Release Notes for NPO OAMx.x document to know whether it is
mandatory to change it.If the CD1 must be changed, you must perform a complete
reinstallation and not only an upgrade. In this case, use the [1] Alcatel-Lucent
9359 Network Performance Optimizer-Server and Client Installation document.
29
Copyright 2004-2008 Alcatel-Lucent Software Replacement (Intra Muse Kernel)
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
30/69
5.2.2 Upgrade CD2SNote: This procedure takes10 min.
ATTENTION
Ensure that the CD2S version has changed before proceeding with the upgrade.
ATTENTION
All actions on the NPO server MUST BE PERFORMED ON THE LOCAL CONSOLE (
whatever is defined for the specific server: either local Screen and Keyboard, or serial
connection)
Perform the following actions as root on the server:
Procedure
Step Action
1. Insert in the drive the DVD-ROM containing the new software version.
2. Mount the CD2S_MSx_xxxxxxxx. iso image as follows:
>>#cd /alcatel
>>#mkdir -p iso/cd2s
>>#lofiadm -a /cdrom/cdrom0/CD2S_MSx_xxxxxxxx.iso
#mount -F hsfs -o ro /dev/lofi/n /alcatel/iso/cd2s
nis given by the system
3. Launch the CD2S upgrade:
>>cd /alcatel/iso/cd2s/UPG
>>./upg_3PP
4. Wait for the software upgrade.
5. Unmount the CD2S_MSx_xxxxxxxx. iso image as follows:
>>#cd /
30
3BK-17429-9089-RJZZA 01.15/EN Standard June 2009 Copyright 2004-2008 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
31/69
>>#mount -v
Look in alcatel/iso/cd2s and note the related number of /dev/lofi:
>>#cd /alcatel
>>#umount /alcatel/iso/cd2s
>>#lofiadm -d /dev/lofi/n
nis the number noted above:
6. Verify that the signature of CD2S version is updated:
>>#more /etc/A1353RA.signature
7. Check the CD2S log file:>>cd /var/omc3/install
>>egrep -i " error|^error" *.log
Note: If errors appear during the software upgrade procedure, please check the [5] ExternalRelease Notes for NPO OAMx.x document.
--End--
31
Copyright 2004-2008 Alcatel-Lucent Software Replacement (Intra Muse Kernel)
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
32/69
5.2.3 Upgrade CD2PNote: This procedure takes20 min.
ATTENTION
Ensure that the CD2P version has changed before proceeding with the upgrade.
ATTENTION
In "Remote " connection, use onlyssh, do not use telnet or rlogin.
Perform the following actions as root on the server.
Procedure
Step Action
1. Mount the CD2P_MSx_xxxxxxxx. iso image as follows:>>#cd /alcatel
>>#mkdir -p iso/cd2p
>>#lofiadm -a /cdrom/cdrom0/CD2P_MSx_xxxxxxxx.iso
cd /alcatel/iso/cd2p
>>./install_PATCHESNote: The server automatically reboots during this step.
3. Check that the software upgrade is finished:
>>vi /var/sadm/system/logs/time.log
4. Wait for the software upgrade.
5. Verify that the signature of CD2P version is updated:
>>#more /etc/A1353RA.signature
32
3BK-17429-9089-RJZZA 01.15/EN Standard June 2009 Copyright 2004-2008 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
33/69
6. Check the CD2P log file:>>cd /var/omc3/install
>>egrep -i " error|^error" install_PATCHES.log
>>egrep -i " error|^error" install_mng.log
Note: If errors appear during the software upgrade procedure, please check the [5] ExternalRelease Notes for NPO OAMx.x document.
--End--
33
Copyright 2004-2008 Alcatel-Lucent Software Replacement (Intra Muse Kernel)
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
34/69
5.2.4 Upgrade ORACLENote: This procedure takes1h00.
ATTENTION
Ensure that the Oracle version has changed before proceeding with the upgrade.
ATTENTION
In remote connection, use onlyssh, do not use telnet or rlogin.
Perform the following actions as root on the server.
Procedure
Step Action
1. Edit the file :>>vi /etc/inittab
Comment the following line:
m1:234:respawn:/alcatel/omc1/OMC_MON/script/mon
-c/alcatel/omc1/OMC_MON/conf/mon.cf 1>/dev/null 2>&1 #OSM mon daemon
2. To take into account the modification of the file /etc/inittab, execute the command:
>>init q
3. Stop the Base Oracle
Non Cluster Configuration su - oracle dbshut exit
Cluster Configuration su - oracle cd / opt/app/oracle/product/10.2.0/bin/ ./srvctl stop
database -d SNM exit
4. Check that the database is stopped:
>>ps -ef | grep ora_
>>ps -ef | grep lsn
34
3BK-17429-9089-RJZZA 01.15/EN Standard June 2009 Copyright 2004-2008 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
35/69
Wait until each of the previous commands returns nothing on the screen.
5. Asroot, type:
>>cd /alcatel
>>cp /cdrom/cdrom0/OMC_INST_Mxx.Xxxxxx.tar.gz .
>>gzip -cd OMC_INST_Mxx.Xxxxxx.tar.gz | tar xvf -
6. Regenerate server profile, asrootuser:
>>cd /alcatel/OMC_INST_M23_Xxxxx
>>./gen_profile
Note: Do not edit the "Server Profile" file because it is automatically generated and should notbe modified.
7. At the question,
y
8. The following information is displayed:
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
36/69
If no SDLT device is connected, the OSB option will not be available.
Note: The option number 3 -No archive is only for testing. You are not allowed to use it in anyother situation.
Type your option for backup/restore solution, then press [Enter]
9. The following message is displayed:
./server_install /var/tmp/server.profile
The software to be installed appears and the following message is displayed:
[Enter] to continue the installation
12. Check that only Oracle Patch is installed.
13. After patch installation, uncomment the last line of the file /etc/inittab
14. Execute the command:
>>init q
15. Reboot the Server:
>>reboot
Wait for this machine to comes up.
16. Verify that the signature of Oracle version is updated:
>>#more /etc/A1353RA.signature
17. Check the Oracle log files:
36
3BK-17429-9089-RJZZA 01.15/EN Standard June 2009 Copyright 2004-2008 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
37/69
>>cd /alcatel/install/log
>>egrep -i " error|^error" oraclepatch.log
>>egrep -i " error|^error" server_install.log_xxx (xxx is the file date)
Note: If errors appear during the software upgrade procedure, please check the [5] ExternalRelease Notes for NPO OAMx.x document.
--End--
37
Copyright 2004-2008 Alcatel-Lucent Software Replacement (Intra Muse Kernel)
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
38/69
5.2.5 Upgrade CD3SNote: This procedure takes30 min.
ATTENTION
Ensure that the CD3S version has changed before proceeding with the upgrade.
ATTENTION
In remote connection, use onlyssh, do not use telnet or rlogin.
Perform the following actions as root on the server.
Procedure
Step Action
1. Mount the CD3S_MS_xxxxxxxx. iso image as follows:>>#cd /alcatel
>>#mkdir -p iso/cd3s
>>#lofiadm -a /cdrom/cdrom0/CD3S_MS_xxxxxxxx.iso
#mount -F hsfs -o ro /dev/lofi/n /alcatel/iso/cd3s
nis given by the system
2. Launch the installation script:
>>cd /alcatel/iso/cd3s
>>./gen_install.pl
3. Answer at the following questions as follows:
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
39/69
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
40/69
Note: If errors appear during the software upgrade procedure, please check the [5] ExternalRelease Notes for NPO OAMx.x document.
8. Unmount the CD3S_MS_xxxxxxxx. iso image as follows
>>#cd /
>>#mount -v
The tag of product currently installed, if you want to upgrade the software.
Look in alcatel/iso/cd3s and note the related number of /dev/lofi:
>>#umount /alcatel/iso/cd3s
>>#lofiadm -d /dev/lofi/n
nis given by the system
9. Remove the current DVD from the drive:
>>cd /
>>eject
10. Reboot the Server :
>>reboot
Wait for this machine to comes up.
11. Customize Iconbox as Supervision / NPO Only
This task can be performed only if the current installed product is MS-OMC Portal. It allows you
to configure only Supervision or only NPO. In this case, perform Customize Iconbox as
Supervision / NPO Only from [2] 9953 MP / NPO Platform Administration Guide.
Note: This task cannot be used to migrate from 9159 NPO product to MS-OMC Portal.
--End--
40
3BK-17429-9089-RJZZA 01.15/EN Standard June 2009 Copyright 2004-2008 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
41/69
5.2.6 Upgrade CD4Note: This procedure takes10 min.
ATTENTION
Ensure that the CD4 version has changed before proceeding with the upgrade.
ATTENTION
In remote connection, use onlyssh, do not use telnet or rlogin.
Perform the following actions as root on the server.
Procedure
Step Action
1. Insert thenew CD4 CD-ROM in the drive.
2. Launch the CD4 installation
>>cd /cdrom/cdrom0
>>./install.sh
The following message appears
>cd /var/sadm/install/logs
>>egrep -i " error|^error" *.log
Note: If errors appear during the software procedure upgrade, please check the [5] External
41
Copyright 2004-2008 Alcatel-Lucent Software Replacement (Intra Muse Kernel)
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
42/69
Release Notes for NPO OAMx.x document.
Note: If the problems persists, apply theReverse Procedure
--End--
42
3BK-17429-9089-RJZZA 01.15/EN Standard June 2009 Copyright 2004-2008 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
43/69
5.2.7 Upgrade Generic DocumentationNote: This procedure takes5 min.
ATTENTION
Ensure that the Documentation version has changed before proceeding with the
upgrade.
ATTENTION
In remote connection, use onlyssh, do not use telnet or rlogin.
Perform the following actions as root on the server.
Procedure
Step Action
1. Insert the documentation CD-ROM
2. Change the current directory:
>>cd /cdrom/cdrom0
3. Remove the documentation:
Note: When launching the removal, some files can not be accessed and causes 2 errormessages, do not take into account.
>>./remove_muse_doc
./install_muse_doc
The documents are installed in /alcatel/docs/21368/data/collection directory.
5. Remove the current CD-ROM from the drive:
>>cd /
>>eject
43
Copyright 2004-2008 Alcatel-Lucent Software Replacement (Intra Muse Kernel)
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
44/69
--End--
44
3BK-17429-9089-RJZZA 01.15/EN Standard June 2009 Copyright 2004-2008 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
45/69
5.2.8 Start the ApplicationNote: This procedure takes10 min.on the Server.
ATTENTION
In remote connection, use onlyssh, do not use telnet or rlogin.
Perform the following actions as root on the server.
Procedure
Step Action
1. Launch the Firefox browser from the command line:
>>cd /usr/local/firefox
>>./firefox
If an "Alert" pop-up window appears, click on [ OK ]
2. Open the following URL address:
http:///osm/adm
Thecan be:
The IP address of the server, if you upgrade NPO in non cluster configuration
The Master IP address, if you upgrade the master node of NPO in cluster configuration
The Slave IP address, if you upgrade the slave node of NPO in cluster configuration
3. In the prompt window:
Log in with osmadmin (default password: alcatel )
Click on [ OK ]
4. In "Process Monitoring" window, select:
Processes -> Start All
"Confirmation: do you want to start the system ?" Click on [OK]
5. Wait until all leds are green.
45
Copyright 2004-2008 Alcatel-Lucent Software Replacement (Intra Muse Kernel)
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
46/69
6. If there are still red leds, please call Alcatel-Lucent GPS for support.
7. Close the Firefox browser.
--End--
46
3BK-17429-9089-RJZZA 01.15/EN Standard June 2009 Copyright 2004-2008 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
47/69
5.2.9 Import DictionariesNote: This procedure takes from2h45to 4h45on the Server. (Depending on configuration)
ATTENTION
Ensure that the Dictionaries version has changed before proceeding with the upgrade.
ATTENTION
In remote connection, use onlyssh, do not use telnet or rlogin.
Procedure
Step Action
1. Change in "offlinetool.properties" file
Caution:The change in "offlinetool.properties has to be made ONLY if you are not doing amigration from RNO/NPA.
Edit the file: /alcatel/muse/MUSE_QOS/offlinetool/config/offlinetool.properties
Set the value of the parameter muse.offlinetool.historic.partition=FALSE
Save the file and close the editor.
2. Import dictionaries
Caution:Before launching this script, ensure that the NPO server is running in order to import
dictionaries successfully.
If needed, insert the CD4 in the drive.
Log in asroot
Launch the Import Dictionaries:
>>cd /cdrom/cdrom0
./umtsfullinstall.sh
Answer "y" and then press Enter
47
Copyright 2004-2008 Alcatel-Lucent Software Replacement (Intra Muse Kernel)
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
48/69
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
49/69
5.3 Post Upgrade TasksIt is recommended to perform a backup at the end of the software upgrade. Several backup / restore
solutions are available. Using one or the other depends on your hardware configuration.
Note: This procedure takes at least 1h 30 on the server.
ATTENTION
All chapters indicated in this section refer to procedures described in the Platform
Administration Guidedocument (3BK 21315 AAAA PCZZA)
Read also the appropriate and most recent Release Note: [5] External Release Notes
for NPO OAMx.x to apply additional commands if needed.
Solution 1 - Local backup using Oracle Secure Backup.
This solution allows a direct backup of Oracle DB files and user management data on a single tape
for:
N240 / DAT72
N240 / SDLT600
V490 (2 or 4 CPU) / SDLT600 devices
If you choose this solution then:
Refer to the section7.1.4 - Tapes devicesto prepare the tape device
Perform the backup:
If the1 OSBoption has been chosen when generating the server profile at the serverupgrade, then theBACKUP_TYPEparameter has been automatically set toOSB value. Inthis case, refer to the section 7.3.2 - Perform Backup with OSB
If the2 Otheroption has been chosen when generating the server profile at the serverupgrade, then theBACKUP_TYPEparameter has been automatically set toNETWORKERvalue. In this case, you must firstly refer to the section 7.3.1 - Install the OSB Software, thenrefer to the section7.3.2 - Perform Backup with OSB.
Note: With the OSB solution, the Oracle Data Base must always run in ARCHIVELOG modewhichever the schedule of backup is. In another words, the offline backup performed while theOracle data Base is in NOARCHIVELOG mode is not supported by OSB scripts.
Solution 2 - Legato Centralized Backup
This solution allows a direct backup of Oracle DB files and user management data for the V490 (2 or
4 CPU) / SDLT600 device. Legato Networker must be installed on an external SUN server with at
least 1TByte of disk space and a gigabit Ethernet interface.
If you choose this solution then:
49
Copyright 2004-2008 Alcatel-Lucent Software Replacement (Intra Muse Kernel)
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
50/69
Refer to the section7.2 - Configure Gb/s Network Interface for Backup Serverto configure the IPinterface device
Refer to the section7.4 - Legato Backup / Restore
If Legato Networker is not installed, refer to the section7.4.1 - Install Legato NetworkerServerto install and configure it.
If Legato Networker is installed, start from the section7.4.1.6 - Configure Legato Device fromLegato Clientto configure it.
Refer to the section7.4.2 - Perform Backup on Legato Clientto perform the backup
Note: With the Legato solution, the Oracle Data Base must always run in ARCHIVELOG modewhichever the schedule of backup is. In another words, the offline backup performed while theOracle data Base is in NOARCHIVELOG mode is not supported by Legato backup scripts.
50
3BK-17429-9089-RJZZA 01.15/EN Standard June 2009 Copyright 2004-2008 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
51/69
5.4 Upgrade NPO Client ApplicationThis procedure describes how to upgrade the NPO application on the Client PC. You must:
Uninstall Client Software
Start NPO Client Application
51
Copyright 2004-2008 Alcatel-Lucent Software Replacement (Intra Muse Kernel)
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
52/69
5.4.1 Uninstall Client Software
Note: This procedure takes20 minon the Client.
ATTENTION
Perform this procedure only if the NPO Client application has been previously installed
with the M2.2.1 software version.
Procedure
Step Action
1. Logon as administrator on the Client PC
2. Close all opened applications
3. SelectStart -> Run,
Entercmd
press [enter]
A command window opens. Enter>>C:to be sure to be on C:\
4. Enter the following path to go to the Tools folder
>>C:\CD PC_install\OMC_INST_y\OMC_INST_x\windows\Tools
Note: OMC_INST_y and OMC_INST_x corresponds to the software currently installed on thePC, and not the new one.
5. Editclient.Uninstall.profile
EnterN for JRE (Java)
EnterY in the flag position for all other installed applications
Save and close the file
6. Reboot the Client PC
7. Go to the following folder:
>>C:\CD PC_install\OMC_INST_y\OMC_INST_x\windows
52
3BK-17429-9089-RJZZA 01.15/EN Standard June 2009 Copyright 2004-2008 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
53/69
Note: OMC_INST_y and OMC_INST_x corresponds to the software currently installed on thePC, and not the new one.
8. LaunchUninstall.pland wait for the end of the uninstallation
Note: If theRegSrv32pop-up appears, click on [OK].
The Client PC automatically reboots
9. Logon as administrator on the Client PC
10. SelectStart -> Settings -> Control Panel -> Add/Remove programs
11. Remove all JREs and Perl softwares
Confirm the reboot of the machine when it is requested.
12. Close the Add and Remove Programs Tool window
13. Delete manually the following directories if they are present:
c:\ILOGdirectory
c:\log_Uninstalldirectory
c:\omcdirectory
c:\omc_installdirectory c:\PC_installdirectory
c:\Perldirectory
14. Check thatc/\cygwindirectory does not exist anymore. If it still exists, rename it.
15. Reboot the PC.
--End--
53
Copyright 2004-2008 Alcatel-Lucent Software Replacement (Intra Muse Kernel)
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
54/69
5.4.2 Start NPO Client Application
Note: This procedure takes5 min on the Client.
ATTENTION
In order to start the 9359 NPO Application on the Client machine, JDK 1.5.0.14 ( "J2SE
Developement KIT 5.0 update 14") must be available on the machine.
Procedure
Step Action
1. To check the JDK version, go tostart -> setting -> control panel -> Add/remove program
2. Ensure that the "J2SE Developpement KIT 5.0 update 14" is available on the machine else youmust install it such as indicated below:
Enter the following IP address in a web browser:http://
Click on the "INSTALL FIRST" button
Click on "Download jdk-1-5-0-14-windows-i586-p.exe to PC"
Answer to the installation questions (confirm, continue,etc...)
3. To start the NPO application, click on the START button on your PC to open iconbox
4. Log in to the Client application (user: "osmadmin", password: "alcatel" and check that the newinstance is OK).
5. Check that the declared data sources are present:
Open Muse applications / NPO data Management / configuration / data source and check
datasources.
Check import follow up: see (NPO data Management / administration / import follow-up).
Check consolidation follow-up: see (NPO data management /administration / Consolidationfollow-up
After scheduled consolidation: see ( NPO data Management / configuration / systemscheduling to know the schedule).
If necessary, launch manual consolidation for the day datasource you re-declared as well asfor recovery days (depends on the supervision outage due to upgrade). The manualconsolidation can take several hours.
54
3BK-17429-9089-RJZZA 01.15/EN Standard June 2009 Copyright 2004-2008 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
55/69
Open AD (Muse applications / optimization / Analysis Desktop), select CELL3G and click ontopology. Check that the NEs corresponding to the datasource are present.
--End--
55
Copyright 2004-2008 Alcatel-Lucent Software Replacement (Intra Muse Kernel)
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
56/69
5.5 Remove Old Instance
Note:This procedure takes 5 min .
ATTENTION
In remote connection, use onlyssh, do not use telnet or rlogin.
Procedure
Step Action
1. Open a Terminal window asroot.
2. Launch the following commands:
>>cd /alcatel
>>ls
3. Find out the right old instance number: 1 or 2Below it is noted the {old_x} as the old instance and {x} as the new instance.
4. Run the OMC removal scripts:
>>cd /alcatel/omc{old_x}/scripts
>>./evinpkgremoveomc -f /alcatel/omc{old_x}/ install/data/UMTS_instPrd.lst -R/alcatel/omc{old_x}
where {old_x} is the old instance value retrieved before.
At the question, answery.
--End--
56
3BK-17429-9089-RJZZA 01.15/EN Standard June 2009 Copyright 2004-2008 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
57/69
6 Reverse ProcedureThis chapter describes the tasks to apply the Reverse Procedure on the NPO server.
Procedure
Step Action
1. If any, install from scrath the NPO machine using the old software version. Refer to [1]9359Network Performance Optimization-Server and Client Installation method(3BK 17429 9087RJZZA).
2. Restore the NPO database backup performed before starting the Software Upgrade procedure.The database recovery procedure to be applied depends on your hardware configuration and onthe solution you have chosen to backup the data. Look at:
Perform a Full Backupfor a non-cluster configuration
Perform a Full Backupfor a cluster configuration
then report to the [2] 9953 MP / NPO Platform Administration Guide(3BK 21315 AAAA PCZZA),
to retrieve the detailed database recovery procedure.
--End--
57
Copyright 2004-2008 Alcatel-Lucent Software Replacement (Intra Muse Kernel)
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
58/69
7 PI02 - Upgrade Server in Cluster ConfigurationThis chapter describes the tasks for MS-OMC Portal/9359-NPO Server Upgrade in cluster
configuration.
58
3BK-17429-9089-RJZZA 01.15/EN Standard June 2009 Copyright 2004-2008 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
59/69
7.1 Initial Tasks on ServerThree initial tasks has to be done before performing the software replacement in cluster
configuration:
Perform a Full Backup
Check Active Instance
Stop Processes
59
Copyright 2004-2008 Alcatel-Lucent Software Replacement (Intra Muse Kernel)
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
60/69
7.1.1 Perform a Full BackupDifferent solutions are available to backup data before proceeding with the software replacement in
cluster configuration. Using one or the other depends on your hardware configuration. This can be
useful in case you need to restore data.
Keep in mind that:
The network drive is mounted on both cluster nodes (master and slave) but the backup andrecovery operations are performed on the master node only
A backup using V490 / OSB and N240 / DAT72 devices is not possible.
Note: This procedure takes at least 1h 30 on the server.
ATTENTION
All chapters indicated in this section refer to procedures detailed in thePlatform
Administration Guidedocument (3BK 21315 AAAA PCZZA)
Read also the appropriate and most recent Release Note: [5] External Release Notes
for NPO OAMx.x to apply additional commands if needed.
Solution 1 - Legato Centralized Backup
This solution allows a direct backup of Oracle DB files and user management data for the V490
(Cluster) / Legato device. Legato Networker must be installed on an external SUN server with at least
1TByte of disk space and a gigabit Ethernet interface.
If you choose this solution then:
Refer to the section7.2 - Configure Gb/s Network Interface for Backup Serverto configure the IPinterface device
Refer to the section7.4 - Legato Backup / Restore
If Legato Networker is not installed , refer to the section7.4.1 - Install Legato NetworkerServerto install and configure it.
If Legato Networker is installed, start from the section7.4.1.6 - Configure Legato Device from
Legato Clientto configure it. Refer to the section7.4.2 - Perform Backup on Legato Clientto perform the backup
Note: With the Legato solution, the Oracle Data Base must always run in ARCHIVELOG modewhichever the schedule of backup is. In another words, the offline backup performed while theOracle data Base is in NOARCHIVELOG mode is not supported by Legato backup scripts.
Solution 2 - Media Manager (MM) Support Backup
This solution allows a backup of Oracle DB files and user management data for the V490 (Cluster) /
MM device. This solution is based on an open API which operates with an External Manager such as
60
3BK-17429-9089-RJZZA 01.15/EN Standard June 2009 Copyright 2004-2008 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
61/69
Veritas NetBackup or HP Data Protector.
Oracle RMAN is integrated with Veritas NetBackup thanks to the supplied Media Manager Library
(MML) API. It allows Oracle RMAN to interwork with Veritas NetBackup , therefore providing a
block-level corruption detection during a backup/restore procedure
In cluster configuration, there is no direct connection between the MM and the Oracle RMAN, so an
intermediate local hard drive storage (network disk storage) is required. The MM backups the data on
the local hard drive, then the Veritas NetBackup or HP Data Protector backups these data from this
local disk.
If you choose this solution then:
Refer to the section7.2 - Configure Gb/s Network Interface for Backup Serverto configure the IPinterface device
Refer to the section7.7 - Backup / Restore to/from Disk for Cluster Configurationto perform thebackup
For a Veritas backup of the system, you can also refer to the section7.8.2 - Veritas NetBackupProcedure in case of the Backup for the System
61
Copyright 2004-2008 Alcatel-Lucent Software Replacement (Intra Muse Kernel)
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
62/69
7.1.2 Check Active InstanceNote: This procedure takes2 min .
Procedure
Step Action
1. Open a Terminal window as root.
2. Launch the Firefox browser from the command line:
>>cd /usr/local/firefox
>>./firefox
If an "Alert" pop-up window appears, click on [OK] .
3. Open the following URL address:
http:///osm/admin
4. In the prompt window:
Log in withosmadmin(default password: alcatel ).
Click on [OK].
Click on process monitoring.
Select Show Details.
Read System version / Instance.
Note down active instance number on a paper.
--End--
62
3BK-17429-9089-RJZZA 01.15/EN Standard June 2009 Copyright 2004-2008 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
63/69
7.1.3 Stop ProcessesNote: This procedure takes8 min.
Procedure
Step Action
1. Using the same firefox browser:
Click on "process monitoring". Click on "Stop Cluster".
2. Wait until the processes of NPO part and CoreServices part are stopped (orange leds)
--End--
63
Copyright 2004-2008 Alcatel-Lucent Software Replacement (Intra Muse Kernel)
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
64/69
7.2 Perform Software UpgradeThis chapter describes how to upgrade the server in cluster configuration. The following actions must
be performed in the specified order, for both master and slave machines.
Procedure
Step Action
1. Perform the following asrootuser on the mastermachine: Stop the cluster monitoring
>>cd /alcatel/omc/CLUSTER
>>./activate_monitoring stop
Perform the actions described in the following procedures:
Verify that you have perform theInitial Tasks on Server
Upgrade CD2S
Upgrade CD2P
Upgrade ORACLE
Upgrade CD3S
Insert the CD4 CD-ROM in the master machine drive, then launch the CD4:
>>cd /cdrom/cdrom0
>> ./install.sh
Wait for the software upgrade.
2. Asrooton the slavemachine:
Perform the actions described in the following procedures:
Upgrade CD2S
Upgrade CD2P
Upgrade ORACLE
Upgrade CD3S
Insert the CD4 CD-ROM in the slave machine drive, then launch the CD4:
>>cd /cdrom/cdrom0
>> ./install.sh
64
3BK-17429-9089-RJZZA 01.15/EN Standard June 2009 Copyright 2004-2008 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
65/69
Wait for the software upgrade.
3. On themastermachine, perform the actions described in the following procedures:
Upgrade Generic Documentation
Start the Application
Import Dictionaries
Post Upgrade Tasks
Uninstall Client Software
Start NPO Client Application
Remove Old Instance
4. On theslavemachine, perform the actions described in the following procedures
Start NPO Client Application
Remove Old Instance
5. On themastermachine, start the cluster monitoring process:
>>cd /alcatel/omc/CLUSTER
>> ./activate_monitoring start
--End--
65
Copyright 2004-2008 Alcatel-Lucent Software Replacement (Intra Muse Kernel)
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
66/69
7.3 Post Upgrade TasksIt is recommended to perform a backup at the end of the software upgrade. Several backup / restore
solutions are available. Using one or the other depends on your hardware configuration.
Keep in mind that:
The network drive is mounted on both cluster nodes (master and slave) but the backup andrecovery operations are performed on the master node only
A backup using V490 / OSB and N240 / DAT72 devices is not possible.
Note: This procedure takes at least 1h 30 on the server.
ATTENTION
All chapters indicated in this section refer to procedures detailed in thePlatform
Administration Guidedocument (3BK 21315 AAAA PCZZA)
Read also the appropriate and most recent Release Note: [5] External Release Notes
for NPO OAMx.x to apply additional commands if needed.
Solution 1 - Legato Centralized Backup
This solution allows a direct backup of Oracle DB files and user management data for the V490
(Cluster) / Legato device. Legato Networker must be installed on an external SUN server with at least
1TByte of disk space and a gigabit Ethernet interface.
If you choose this solution then:
Refer to the section7.2 - Configure Gb/s Network Interface for Backup Serverto configure the IPinterface device
Refer to the section7.4 - Legato Backup / Restore
If Legato Networker is not installed, refer to the section7.4.1 - Install Legato NetworkerServerto install and configure it.
If Legato Networker is installed, start from the section7.4.1.6 - Configure Legato Device fromLegato Clientto configure it.
Refer to the section7.4.2 - Perform Backup on Legato Clientto perform the backup
Solution 2 - Media Manager (MM) Support Backup
This solution allows a backup of Oracle DB files and user management data for the V490 (Cluster) /
Open MM device. This solution is based on an open API which operates with an External Manager
such as Veritas NetBackup or HP Data Protector.
Oracle RMAN is integrated with Veritas NetBackup thanks to the supplied Media Manager Library
(MML) API. It allows Oracle RMAN to interwork with Veritas NetBackup , therefore providing a
block-level corruption detection during a backup/restore procedure
66
3BK-17429-9089-RJZZA 01.15/EN Standard June 2009 Copyright 2004-2008 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
67/69
In cluster configuration, there is no direct connection between the MM and the Oracle RMAN, so an
intermediate local hard drive storage (network disk storage) is required. The MM backup the data on
the local hard drive, then the Veritas NetBackup or HP Data Protector backup these data from this
local disk.
If you choose this solution then:
Refer to the section7.2 - Configure Gb/s Network Interface for Backup Serverto configure the IPinterface device
Refer to the section7.7 - Backup / Restore to/from Disk for Cluster Configurationto perform thebackup
For a Veritas backup of the system, you can also refer to the section7.8.2 - Veritas NetBackupProcedure in case of the Backup for the System
67
Copyright 2004-2008 Alcatel-Lucent Software Replacement (Intra Muse Kernel)
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
68/69
68
3BK-17429-9089-RJZZA 01.15/EN Standard June 2009 Copyright 2004-2008 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9089%2DRJZZA %289359%2DNPO Software Replacement %28Intra Muse Kernel%29 01%2E15
69/69
Wireless Service Provider SolutionsAlcatel-Lucent 9359 Network Performance OptimizerSoftware Replacement (Intra Muse Kernel)
Alcatel-Lucent - Internal - Proprietary - Use pursuant to Company instruction
Copyright 2004-2008 Alcatel-Lucent, All Rights Reserved
UNCONTROLLED COPY: The master of this document is stored on an electronic database and is "write protected"; it may be alteredonly by authorized persons. While copies may be printed, it is not recommended. Viewing of the master electronically ensures accessto the current issue. Any hardcopies taken must be regarded as uncontrolled copies.
ALCATEL-LUCENT CONFIDENTIAL: The information contained in this document is the property of Alcatel-Lucent. Except as
expressly authorized in writing by Alcatel-Lucent, the holder shall keep all information contained herein confidential, shall disclose theinformation only to its employees with a need to know, and shall protect the information from disclosure and dissemination to thirdparties. Except as expressly authorized in writing by Alcatel-Lucent, the holder is granted no rights to use the information containedherein. If you have received this document in error, please notify the sender and destroy it immediately.
Alcatel-Lucent, Alcatel, Lucent Technologies and their respective logos are trademarks and service marks of Alcatel-Lucent, Alcateland Lucent Technologies.
Oracle is a registered trademark of Oracle Corporation and/or its affiliates.
All other trademarks are the property of their owners.
Document number: 3BK-17429-9089-RJZZADocument issue: 01.15/ENDocument status: StandardProduct Release: OAM 5.2
Date: June 2009