3800 die-bonder overview
TRANSCRIPT
Palomar Technologies
3800 Die BonderUltra-Flexible Component
Placement System
www.palomartechnologies.com 1© 2012 Palomar Technologies, Inc.
3800 Die BonderAt a Glance• Fully automatic, precision
microelectronics assembly• Highly-flexible, computer-controlled
work cell• Up to three channels of adhesive
dispense, component placement, eutectic die attach and flip chip operations
• New, studier designed mechanical structure
• Process camera• Quiet linear motors• 0.1 micron linear XY encoders
www.palomartechnologies.com 2© 2012 Palomar Technologies, Inc.
www.palomartechnologies.com 3© 2012 Palomar Technologies, Inc.
LARGE WORK AREA
710 square inch work envelope which can handle flip chip, multiple dispense
tools and a variety of work holders alongside a pulsed heat stage for eutectic
attach and an epoxy daub pot
3800 Die BonderCycle Time
Up to 2600 UPH; Axis Speeds near 40-ips with resolutions of 0.1 micron over work area. Linear Encoders are used for absolute positioningRepeatability
3.5 micron at 3 sigma placement repeatabilityPlacement Accuracy +/- 0.00028” (7 micron)True Radical Position depending on application
www.palomartechnologies.com 4© 2012 Palomar Technologies, Inc.
Multiple Options• Pulsed heat stage/steady state• Flip chip• Three channels of fluid dispense• Tape feeders• Magazine handlers• Hot rail handler• ID tracking software• Look-up camera software• In-line assembly lines• Fully automatic substrate part
loading• Motorized expanded wafer die
ejectors• Automatic dispense in series with
pick-and-placewww.palomartechnologies.com 5© 2012 Palomar Technologies, Inc.
Versatile Programming and Operation Tools• Process camera• Object-based
programming• Fast program creation
tools• Diagnostic and calibration
routes• Off-line programming
vacuum sense thresholds• Bond Data Analysis™
www.palomartechnologies.com 6© 2012 Palomar Technologies, Inc.
Pattern Recognition
• Advanced Cognex gray-scale pattern recognition system locates randomly oriented device features under a wide variety of background conditions and lighting
• PR Systems Includes:– Auto focus– Contrast enhancement– Averaging– Synthetic modeling/masking– Capacitor find– Centroid modeling– Programmable magnification and light intensity
www.palomartechnologies.com 7© 2012 Palomar Technologies, Inc.
Ergonomics
1. New, user-friendly ergonomic user interface
2. Changeable control systems for differences in operator height
3. Gas spring-assisted cover for ease of opening, closing and everything in between
www.palomartechnologies.com 8© 2012 Palomar Technologies, Inc.
Dispensing Options
• Dot Dispensing– For high-accuracy dispense of
dots as small as 15mm on small devices
• Line Dispensing– For larger devices where
pattern dispense is needed– Can be conductive or
nonconductive– This type of dispenser (auger)
requires a specific minimum epoxy viscosity
• Time and Pressure Dispensing– Used to dispense lines over a
wide area with low-viscosity epoxy
• Daubing– Can accommodate multiple
individually controlled daubing stations
– Daub tool is dipped into the daub pot, containing epoxy, then touches the die surface, resulting in transferred dots between 5-8mm
– Used for low volume requirements and small dot size
www.palomartechnologies.com 9© 2012 Palomar Technologies, Inc.
Eutectic Die Attach
www.palomartechnologies.com 10© 2012 Palomar Technologies, Inc.
11
Tape Feeder Option
www.palomartechnologies.com© 2012 Palomar Technologies, Inc.
The 8mm feeder requires two slots, and the 12mm requires three slots. In the picture shown below, the farthest to the right is an 8mm and the one next to it is a 12mm.
Displayed above is an accurate representation also showing two 8mm and one 12mm feeders on the 3800 work envelope. A 16mm is also available.
Automated In-Line Assembly –Hot Rail Eutectic Die Attach
www.palomartechnologies.com 12© 2012 Palomar Technologies, Inc.
Automated In-Line Assembly –Epoxy and Eutectic Die Attach
www.palomartechnologies.com 13© 2012 Palomar Technologies, Inc.
Common Applications
• Flip Chip• Chip-On-Board• HB/HP LED Assembly• Microwave Modules• RF Packages• Hybrid Microcircuits• Fine Pitch SMT• MEMS• Laser Diodes• LED Print Head Attachment
• Solar Concentrator Packaging• MOEMS• AuSi Eutectic Scrub• AuSn Eutectic Solder Attach• PbSn Solder Perform• Anisotropic Conductive Paste
for Flip Chip Attachment• High Accuracy Placement of
Optical Components*partial lists
www.palomartechnologies.com 14© 2012 Palomar Technologies, Inc.
3800 Die Bonder Resources
• 3800 Die Bonder Data Sheet• AuSi / AuSn Eutectic Die Attach Case Studies• Micron-Level Placement Accuracy for High Aspect Ratio Die i
n Printing Products• Micron-Level Placement Accuracy for Optoelectronic Compon
ents
• Process and Reliability Advantages of AuSn Eutectic Die Attach
• Automated Eutectic Die Attach• Improved Eutectic Die Attach with Pulsed Heat System
www.palomartechnologies.com 15© 2012 Palomar Technologies, Inc.
Corporate Headquarters: +1-760-931-3600
APAC: +65-6686-3096
EMEA: +49-9131-48009-30
Palomar TechnologiesFor more information visit www.palomartechnologies.com
© 2012 Palomar Technologies, Inc. www.palomartechnologies.com 16