[35th annual cocoa beach preliminary program rev#11/jan13...

[35th Annual Cocoa Beach Preliminary Program REV#11/Jan13,2011-8:30am]

1

35th Annual Conference on Composites, Materials and Structures (U.S. Citizens Only / ITAR Restricted Sessions)

January 24-27, 2011

www.advancedceramics.org/conference

Radisson Resort at the Port Cocoa Beach / Cape Canaveral, Florida

http://www.advancedceramics.org/conference�


2

Program at a Glance

Sunday Evening, January 23, 2011 6:00-9:00pm

Pre-Registration (Convention Center Lobby) *Complimentary Refreshments*

Monday, January 24, 2011 Tuesday, January 25, 2011

(Morning – Three (3) Concurrent Sessions) 8:30-12:00 Session 1: Ceramic Matrix Composites 1 (Salon II) Session 2: Carbon-Carbon 1 (Salon I)

Session 3: Materials for Extreme Environments Applications – Propulsion Materials 1 (Jamaica)

(Afternoon – Three (3) Concurrent Sessions)

1:30-5:00 Session 1: Ceramic Matrix Composites 2 (Salon II) Session 2: Carbon-Carbon 2 and Thermal

Management (Salon I) Session 3: Materials for Extreme Environments

Applications – Propulsion Materials 2 (Jamaica)

(Afternoon/Evening Activities)

2:00-4:00 Exhibit Set-up (Pavilion) 5:00-9:00 ITAR Restricted Expo Opens 5:00-6:00 Networking Social 6:00-8:00 Networking Dinner

(Morning – Two (2) Concurrent Sessions) 8:30-12:00 Session 1: Ceramic Matrix Composites 3 and

Hi-Temperature Sensing Materials and Devices – Aero Propulsion 1 (Salons I & II)

Session 2: Materials for Extreme Environments Applications – Refractory Metals and Ceramics (Jamaica)

(Afternoon – Three (3) Concurrent Sessions)

1:30-5:20 Session 1: Ceramic Matrix Composites 4 (Salon II)

Session 2: Hi-Temperature Sensing Materials and Devices – Aero Propulsion 2 (Salon I) Session 3: Materials for Extreme Environments Applications – Hypersonic Weapons (Jamaica)

(Evening Activities) 5:00-7:00 ITAR Restricted Expo Opens (Pavilion) Networking Social 7:30-8:30 Exhibit Breakdown

Wednesday, January 26, 2011 Thursday, January 27, 2011

(Morning – Two (2) Concurrent Sessions) 8:30-12:00 Session 1: JANNAF (Salon II) Session 2: Hi-Temperature Sensing Materials and

Devices – Land Based Power Generation 1 (Salon I)

12:00-1:30 Complimentary Poolside Luncheon (Pool Deck)

or Lunch on your own

(Afternoon Session) 1:30-4:20 Session 1: Ablator (Salon II) 1:30-5:00 Session 2: Hi-Temperature Sensing Materials and

Devices – Land Based Power Generation 2 (Salon I)

(Morning Session) 8:30-12:00 Session 1: Hypersonic Vehicle Materials/Structural

Evaluations 1 (Salon II)

(Afternoon Session) 1:30-4:40 Session 1: Hypersonic Vehicle Materials/Structural

Evaluations 2 (Salon II)


3

Sunday, January 23, 2011 Location: Convention Center Lobby

6:00-9:00pm Pre-Registration *Complimentary Refreshments*


4

Monday Morning, January 24, 2011 Session 1: Ceramic Matrix Composites 1 Session Chairs: J. Douglas Kiser and Martha Jaskowiak, NASA Glenn Research Center, Cleveland, OH Location: Salon II 7:30-8:30am Registration and Continental Breakfast 8:15-8:20am Introductory Remarks – Session Chairs 8:20-8:40am 2700°F SiC/SiC Composites for Turbine Hot Section Components

A. Katz, Air Force Research Laboratory, Wright Patterson AFB, OH 8:40-9:00am Ceramic Matrix Composite Research at the NASA Glenn Research Center

J. Grady, NASA Glenn Research Center, Cleveland OH 9:00-9:20am Oxide-Oxide Composites with Bridging Interlaminar Fibers

T. Key, Air Force Research Laboratory, Wright Patterson AFB, OH E. Boakye, K. Keller and T. Parthasarathy, UES Inc., Dayton, OH

9:20-9:40am Dovetail Attachment Design for Cooled Ceramic Composite Turbine Blades

G. Holloway, Diversitech Inc., Cincinnati, OH R. Sikorski, Air Force Research Laboratory, Wright Patterson AFB, OH R. Meade, LogiK Research & Engineering, Inc., Springdale, OH

9:40-10:00am Effects of Thermal Aging on NextelTM 312/Silicon Oxycarbide Composite

E. Jones and L. Zawada, Air Force Research Laboratory, Wright Patterson AFB, OH R. Batzer, Lockheed Martin, Fort Worth, TX

10:00-10:20am BREAK 10:20-10:40am Manufacturing Ceramic Matrix Composites for Advanced Turbine Engines

S. Atmur, ATK COI Ceramics, Rocket Center, WV 10:40-11:00am Development of Silicon Oxycarbide Glass Matrix Carbon and Silicon Carbide Fiber Composites

W. Vaughn and R. Leggette, NASA Langley Research Center, Hampton VA E. Rabenberg, Boise State University, Boise, ID

11:00-11:20am Effects of Defects in Ceramic Matrix Composites; Automated Production Tools Software

M. Dion and G. Teti, Materials Research & Design, Inc., Wayne, PA 11:20-11:40am Environmental Resistance of Oxide-Oxide Ceramic Matrix Composites for Hot Structure

Applications K. David and L. Lehman, Boeing Research and Technology, Huntington Beach, CA

11:40-12:00pm Progressive Damage Analysis of CMC Components under Complex Stress States

P. Croteau, R. Kumar and G. Welsh, UTRC, East Hartford, CT U. Santhosh, Structural Analytics, Inc., Carlsbad, CA

12:00-1:30pm Lunch on your own


5

Monday Morning, January 24, 2011 Session 2: Carbon-Carbon 1 Session Chair: Andrew Swanson, Air Force Research Laboratory, Wright Patterson AFB, OH Location: Salon I 7:30-8:30am Registration and Continental Breakfast 8:35-8:40am Introductory Remarks – Session Chair 8:40-9:00am Advanced Aerogel-Filled Foam Core Composite Insulation For Extended Range Hypersonic Vehicles

V. Arrieta, S. Brown and B. Williams, Ultramet, Pacoima, CA B. Sullivan and L. Weller, Materials Research & Design, Inc., Wayne, PA M. Droege, Ocellus, Livermore, CA M. Unroe, Air Force Research Laboratory, Wright Patterson AFB, OH

9:00-9:20am Erosion Performance of M50 Densified C/C Throat Material for SM-3’s TSRM

T. Dominick, E. Conly, M. Stransky and B. Goldstone, ATK Propulsion and Controls, Elkton, MD G. Wendel, ATK Space Launch Systems, Brigham City, UT

9:20-9:40am Nanoadditive Modified Carbon-Carbon Composites

T. Policandriotes and P. Filip, Center for Advanced Friction Studies at SIUC, Carbondale, IL 9:40-10:00am Ground Test Evaluation of Carbon Carbon and Antenna Window Materials for Air Force Extended

Range Reentry Conditions T. Ferguson and M. Moser, Southern Research Institute, Birmingham, AL H. Moody, Thermal Technologies Inc., Shelbyville, TN K. Bowman, Air Force Research Laboratory, Wright Patterson AFB, OH

10:00-10:20am BREAK 10:20-10:40am Development of an Arc-Heater Test Method for Lifting Bodies with Swept Leading Edges

M. Moser, C. Wanstall, A. Griffin and S. Starrett, Southern Research Institute, Birmingham, AL H. Moody, Thermal Technologies Inc., Shelbyville, TN

10:40-11:00am Processing Analysis and Alternative Fabrication of 2D Carbon-Carbon Aeroshells

T. Boarts and K. Buesking, Materials Research & Design, Inc., Wayne, PA 11:00-11:20am Development and Design Evaluations of Enhanced Interlaminar Strength Carbon-Carbon Materials

for Exit Cones D. Yurus, K. Hopp and B. Sullivan, Materials Research & Design, Inc., Wayne, PA

11:20-11:40am B-Basis Allowables for Carbon-Carbon Processed to the ACC-4 Condition

E. LaBarre, Johns Hopkins University, Applied Physics Laboratory, Baltimore, MD 11:40-12:00pm Open 12:00-1:30pm Lunch on your own


6

Monday Morning, January 24, 2011 Session 3: Materials for Extreme Environments Applications – Propulsion Materials 1 Session Chairs: Eric Wuchina, Naval Surface Warfare Center, West Bethesda, MD Gautham Ramachandran, Lockheed Martin Advanced Technology Center, Palo Alto, CA Joseph Pluscauskis, Materials Research & Design, Inc., Wayne, PA Location: Jamaica Meeting Room located off of the Hotel Lobby 7:30-8:30am Registration and Continental Breakfast 8:35-8:40am Introductory Remarks – Session Chairs 8:40-9:00am ACM - Design and Manufacture of Non-Eroding Ceramic Matrix Composite Material for Attitude Control

Propulsion Application M. Levesque and M. Lippold, Fiber Materials Inc., Biddeford, ME

9:00-9:20am ACM - C/C-SiC Valve Component Capability Testing for NASA's Orion Launch Abort System Attitude Control

Motor J. LaManna, J. Aiken, Eric Busillo, J. Cryder, M. Porter and E. Spero, ATK Propulsion and Controls, Elkton, MD

9:20-9:40am ACM - Analytical Modeling of C/C-SiC Valve Component Break Test for NASA's Orion Launch Abort System

Attitude Control Motor T. Dominick and K. Roldan, ATK Propulsion and Controls, Elkton, MD H. Jensen and K. Buesking, Materials Research & Design Inc., Wayne, PA

9:40-10:00am ACM- Update on Testing of C/C-SiC Valve Components for NASA's Orion Launch Abort System Attitude Control

Motor T. Dominick, J. White, J. LaManna, D. McGrath, D. Dunlap and C. O'Malley, ATK Propulsion and Controls, Elkton, MD R. Freeman and J. Paisley, Lockheed Martin Corporation, Denver, CO

10:00-10:20am BREAK 10:20-10:40am TaC science - Elucidating Microstructure Formations in Ta(x)C(1-x) at Various Carbon Contents

G. Thompson, R. Morris and B. Wang, University of Alabama, Tuscaloosa, AL D. Butts, Plasma Processes Inc., Huntsville, AL S. DiPietro, Exothermics, Inc., Amherst, NH L. Matson, Air Force Research Laboratory, Wright Patterson AFB, OH

10:40-11:00am TaC Science - Influence of Hafnium on the Microstructure and Oxidation Behavior in Tantalum Carbides

B. Schulz, G. Thompson, B. Wang and A. Blackwell, University of Alabama, Tuscaloosa, AL D. Butts, Plasma Processes Inc., Huntsville, AL H. Lee, United Energy Systems, Dayton, OH L. Matson, Air Force Research Laboratory, Wright Patterson AFB, OH

11:00-11:20am TaC Science - Deformation Mechanisms in Tantalum Carbides

N. De Leon and G. Thompson, University of Alabama, Tuscaloosa, AL H. Lee and P. Mogilevsky, United Energy Systems, Dayton, OH L. Matson, Air Force Research Laboratory, Wright Patterson AFB, OH

11:20-11:40am TaC Science - First Principle Calculations of Deformation Behavior in Tantalum Carbides

B. Wang, G. Thompson and C. Turner, University of Alabama, Tuscaloosa, AL C. Weinberger, Sandia National Laboratory, Albuquerque, NM E. Wuchina, Naval Surface Warfare Center, Carderock, West Bethesda, MD

11:40-12:00pm TaC Science - Thermo-mechanical Testing of Tantalum Carbides using a Lorentz-force, Non-contact Technique

R. Morris and G. Thompson, University of Alabama, Tuscaloosa, AL 12:00-1:30pm Lunch on your own


7

Monday Afternoon, January 24, 2011 Session 1: Ceramic Matrix Composites 2 Session Chairs: J. Douglas Kiser and Martha Jaskowiak, NASA Glenn Research Center, Cleveland, OH Location: Salon II 1:35-1:40pm Introductory Remarks – Session Chairs 1:40-2:00pm The Effects of Thermal Exposure on a Si-O-C Amorphous Fiber

N. Jacobson and S. Kline, NASA Glenn Research Center, Cleveland, OH 2:00-2:20pm Creep/Stress Rupture Behavior and Failure Mechanisms of Full CVI & Full PIP SiC/SiC Composites

at Temperatures to 3000⁰ F in Air R. Bhatt, J. DiCarlo and D. Kiser, NASA Glenn Research Center, Cleveland OH

2:20-2:40pm Modeling SiC/SiC Creep-Rupture Behavior from 2400⁰ to 3000⁰ F

J. DiCarlo and R. Bhatt, NASA Glenn Research Center, Cleveland OH 2:40-3:00pm Impact Behavior and Damage Mechanisms of Uncoated and EBC Coated SiC/SiC Composites

R. Bhatt and D. Fox, NASA Glenn Research Center, Cleveland OH 3:00-3:20pm BREAK 3:20-3:40pm Laser Machining of Ceramic Matrix Composites

J. Steinbeck, D. Stebbins and F. Lauten, Physical Sciences Inc., Andover, MA 3:40-4:00pm Full-Field Strain Measurement of Ceramic Matrix Composite Materials

T. Engel, Hyper-Therm High-Temperature Composites, Inc., Huntington Beach, CA 4:00-4:20pm Stress Rupture Performance of Oxidation Inhibited SiC/SiC Composites

R. Shinavski and W. Steffier, Hyper-Therm HTC Inc., Huntington Beach, CA 4:20-4:40pm SiC/SiC Composites with SCS Ultra Reinforcement for 2700°F + Service

R. Shinavski, Hyper-Therm HTC Inc., Huntington Beach, CA T. Foltz and W. Grant, Specialty Materials Inc., Lowell, MA

4:40-5:00pm A Perspective on Materials Databases

S. Freiman, Freiman Consulting, Potomac, MD L. Madsen, National Science Foundation, Arlington, VA J. Rumble, Information International Associates, Inc., Oak Ridge, TN


8

Monday Afternoon, January 24, 2011 Session 2: Carbon-Carbon 2 and Thermal Management Session Chairs: Andrew Swanson, Air Force Research Laboratory, Wright Patterson AFB, OH and James Klett, Oak Ridge National Laboratory, Oak Ridge, TN Location: Salon I 1:35-1:40pm Introductory Remarks – Session Chairs 1:40-2:00pm C-C Nozzle Extension Designs and Analyses in Support of J-2X Nozzle Extension Risk Reduction

Effort C. Iwano, L. Weller and B. Sullivan, Materials Research & Design, Inc., Wayne, PA

2:00-2:20pm Analyses and Testing of High-Temperature Structural Insulation for Extended Range C-C Aeroshell

Hypersonic Vehicles L. Weller and B. Sullivan, Materials Research & Design, Inc., Wayne, PA V. Arrietta, B. Williams and S. Brown, Ultramet, Pacoima, CA

2:20-2:40pm Development of Advanced Composites for Reentry Vehicle Nose Tip Applications

S. Violette, Fiber Materials, Inc., Biddeford, ME 2:40-3:00pm Open 3:00-3:20pm BREAK 3:20-3:40pm Thermal Management Presentation

E. Congdon, The Johns Hopkins University, Applied Physics Laboratory, Baltimore, MD 3:40-4:00pm Strain Measurement in Very Low Density Carbon Foam by Digital Image Correlation

R. Matteson, The Johns Hopkins University, Applied Physics Laboratory, Baltimore, MD 4:00-4:20pm High Thermal Performance Module Card Retainers and Composite Heatsinks for Avionics

J. Calder, Material Innovations, Inc., Huntington Beach, CA 4:20-4:40pm Air Force Thermal Management Requirements

D. Pratt, Air Force Research Laboratory, Wright Patterson AFB, OH 4:40-5:00pm Open


9

Monday Afternoon, January 24, 2011 Session 3: Materials for Extreme Environments Applications – Propulsion Materials 2 Session Chairs: Eric Wuchina, Naval Surface Warfare Center, Carderock, West Bethesda, MD Gautham Ramachandran, Lockheed Martin Advanced Technology Center, Palo Alto, CA Joseph Pluscauskis, Materials Research & Design, Inc., Wayne, PA Location: Jamaica Meeting Room located off of the Hotel Lobby 1:35-1:40pm Introductory Remarks – Session Chairs 1:40-2:00pm Overview of Missile Defense Agency Propulsion Materials Development Efforts M. Opeka, Naval Surface Warfare Center, Carderock, West Bethesda, MD 2:00-2:20pm Structural Insulators - Properties of Lyocell Based Composites for Structural Insulator Applications

K. Buesking, Materials Research & Design, Inc., Wayne, PA T. Barnett, Southern Research Institute, Birmingham, AL D. Deason, Missile Defense Agency, Huntsville, AL M. Opeka, Naval Surface Warfare Center, Carderock, West Bethesda, MD W. Shih, Allcomp, Inc., City of Industry, CA

2:20-2:40pm ZrOC Based Structural Insulators

S. Kirkwood and E. Pope, MATECH/GSM, Westlake Village, CA S. Causey, Southern Research Institute, Birmingham, AL

2:40-3:00pm TDACS - Low-Cost, Ultrahigh Temperature Zero-Erosion Ceramic Matrix Composite for SM-3 TDACS

Pintles and Throats T. Stewart, Ultramet, Pacoima, CA P. Marchol, Aerojet, Sacramento, CA J. Pluscauskis and K. Buesking, Materials Research & Design, Wayne, PA

3:00-3:20pm BREAK 3:20-3:40pm Propulsion - Refractory Coated/Lined Low Density Structures

J. Pluscauskis, G. Tiscia, T. Boarts and K. Buesking, Materials Research & Design, Inc., Wayne, PA T. McKechnie, A. Shchetkovskiy, D. Butts and K. Murphee, Plasma Processes Inc., Huntsville, AL P. Valentine, NASA Marshall Space Flight Center, Huntsville, AL

3:40-4:00pm Propulsion In-Space Propulsion Components for Use with AF-315 Monopropellants

A. Fortini and M. Wright, Ultramet, Pacoima, CA


10

Monday Afternoon and Evening Events, January 24, 2011 Location: Pavilion

2:00-4:00pm Exhibit Set-up

5:00-9:00pm ITAR Restricted Expo Opens Expo Opens (ITAR Exhibits)

5:00-6:00pm Networking Social

6:00-8:00pm Networking Dinner


11

Tuesday Morning, January 25, 2011 Session 1: Ceramic Matrix Composites 3 and Hi-Temperature Sensing Materials and Devices – Aero Propulsion 1 Session Chairs: Lew Schmidt, Naval Air Systems Command, Patuxent River, MD and J. Douglas Kiser, NASA Glenn Research Center, Cleveland, OH Location: Salons I and II Combined 7:30-8:30am Registration and Continental Breakfast 8:35-8:40am Introductory Remarks – Session Chairs 8:40-9:20am Ceramic Temperature/Pressure Sensor Suite for Propulsion and Power Technologies

M. Usrey, Sporian Microsystems, Inc., Lafayette, CO 9:20-10:00am Domestic SiNC and SiC Structural Ceramic Fiber Development Progress Report

E. Pope, C. Hill, N. Brabham, J. King, T. Pham, B. Morkunas, J. Rose and R. Thompson, MATECH/GSM, Westlake Village, CA

10:00-10:20am BREAK 10:20-10:40am The MAX Phases: Ductile, Machinable Ternary Carbides and Nitrides for High Temperature Sensing

Applications M. Barsoum, Drexel University, Philadelphia, PA T. El-Raghy, 3-ONE-2, Inc., Willow Grove, PA

10:40-11:00am On the performance of Ta2AlC and Cr2AlC; Ag-based Self Lubricating Composites for Use Over a

Wide Temperature Range Against Ni-based Superalloys in Air-Foil Bearing Systems M. Barsoum, Drexel University, Philadelphia, PA T. Palanisamy, Honeywell International, Morristown, NJ T. El-Raghy, 3-ONE-2, Willow Grove, PA

11:00-11:30am New Intricate Shape Forming of SiC/SiC CMC’s -Opportunity for Sensor Support Structures

T. Carroll, Triton Systems Inc., Chelmsford, MA 11:30-12:00pm Net-to-Shape SiNC-1400X CMCs for Turbine Structural Applications and Sensor Materials

C. Hill, E. Pope, N. Brabham, J. King, T. Pham, B. Morkunas, J. Rose , R. Thompson, MATECH/GSM, Westlake Village, CA

12:00-1:30pm Lunch on your own


12

Tuesday Morning, January 25, 2011 Session 2: Materials for Extreme Environments Applications – Refractory Metals and Ceramics Session Chairs: Eric Wuchina, Naval Surface Warfare Center, Carderock, West Bethesda, MD Gautham Ramachandran, Lockheed Martin Advanced Technology Center, Palo Alto, CA Location: Jamaica Meeting Room located off of the Hotel Lobby 7:30-8:30am Registration and Continental Breakfast 8:35-8:40am Introductory Remarks – Session Chairs 8:40-9:00am Comparison of Extruded Powder Metallurgy Rhenium and Hot Isostatic Pressed Rhenium

T. Leonhardt, Rhenium Alloys Inc., Elyria, OH J. Ciulik, University of Texas at Austin, Austin, TX

9:00-9:20am D Ring Tests of Refractory Metal Rings: Measured and Theoretical Response

S. Causey and J. Wood, Southern Research Institute, Birmingham, AL D. Caputo and K. Buesking, Materials Research & Design, Inc., Wayne, PA

9:20-9:40am Comparison of Multiple Variables in the Production and Handling of Mo-41%Re

J. Wood and S. Causey, Southern Research Institute, Birmingham, AL K. Nagarathnam, UTRON Kinetics, Manassas, VA

9:40-10:00am Mechanical and Thermal Properties of Zycron-H (5027 manufactured by Zircoa)

A. Cull and S. Causey, Southern Research Institute, Birmingham, AL 10:00-10:20am BREAK 10:20-10:40am VPS Processed Boride Based Oxidation Resistant Coatings for High Temperature Applications

B. Schulz, A. Blackwell and G. Thompson, University of Alabama, Tuscaloosa, AL D. Butts, Plasma Processes Inc., Huntsville, AL

10:40-11:00am The Fabrication of High Temperature Coatings Using Supercritical Chemical Fluid Deposition

Lt. D. Swanson and Lt. J. Hoang, Air Force Research Laboratory, Edwards AFB, CA 11:00-11:20am Processing and Properties of Hf-Ta Alloys

S. DiPietro, Exothermics, Amherst, NH I. Talmy, J. Zaykoski and M. Opeka, Naval Surface Warfare Center, Carderock, West Bethesda, MD

11:20-11:40am (Continued) 11:40-12:00pm Phase Composition and Properties of TaB, TaC and TaN Ceramics: Pure and Modified with SiC

J. Zaykoski and I. Talmy, Naval Surface Warfare Center, Carderock, West Bethesda, MD 12:00-1:30pm Lunch on your own


13

Tuesday Afternoon, January 25, 2011 Session 1: Ceramic Matrix Composites 4 Session Chair: J. Douglas Kiser and Martha Jaskowiak, NASA Glenn Research Center, Cleveland OH Location: Salon II 1:35-1:40pm Introductory Remarks – Session Chairs 1:40-2:00pm Strain Analysis of Woven CMC Material Using a Multiscale Damage Model and Strain Visualization

T. Cook, A. Chamberlain, L. Powers and J. Lane, Rolls-Royce Corporation, Indianapolis, IN C. Moss and M. Dahlen, Southern Research Institute, Birmingham, AL J. Fish, Rensselaer Polytechnic Institute, Troy, NY

2:00-2:20pm Multiscale Damage Model Analysis of Woven CMC Material

T. Cook, A. Chamberlain, L. Powers and J. Lane, Rolls-Royce Corporation, Indianapolis, IN W. Wu and J. Fish, Rensselaer Polytechnic Institute, Troy, NY

2:20-2:40pm Low Viscosity Slurry Process for Robust Green Flexible Ceramic, Metal and Composite Sheets

M. Behi and A. Lobovsky, United Materials Technologies, LLC, Newark, NJ 2:40-3:00pm SiC Fiber Produced by Melt Spinning

A. Lobovsky and M. Behi, United Materials Technologies, LLC, Newark, NJ 3:00-3:20pm BREAK 3:20-3:40pm Integrally 3D Woven Stand-off Structures for High Temperature Dielectric Windows

D. Dreimeyer, The Boeing Company, St. Louis, MO K. Sharp and A. Bogdanovich, 3TEX Inc., Raleigh, NC J. Davis, Teledyne Scientific & Imaging Company, Thousand Oaks, CA

3:40-4:00pm Damage and Strength Recovery in SiC Monofilaments

P. Mogilevsky and M. Braginsky, UES Inc., Dayton, OH R. Hay, Air Force Research Laboratory, Wright Patterson AFB, OH

4:00-4:20pm Foreign Object Damage Prediction in Ceramic Matrix Composites

I. Miller, N&R Engineering, Cleveland, OH E. Madenci, The University of Arizona, Tucson AZ S. Choi, Naval Air Systems Command, Patuxent River, MD

4:20-4:40pm The Effect of Fiber Volume Fraction, Fiber Architecture, and Fiber Type on the Creep Behavior of

HiPerComp® CMC D. Dunn and A. Kebbede, GE Global Research, Niskayuna, NY R. Zhou and G. Kirby, GE Aviation, Cincinnati, OH

4:40-5:00pm Relationship of Smooth Bar Strain-to-Failure Data and Notched-Bar Fatigue for a SiC/SiC Ceramic

Matrix Composite R. Nimmer, D. Dunn, A. Kebbede and G. Catlin, GE Corporate Research Center, NY

5:00-5:20pm Thermo-mechanical Properties Characterization of Oxide-Oxide CMC based on Non-Crimp 3D

Orthogonal Woven Preform for High Temperature Dielectric Windows K. Sharp and A. Bogdanovich, 3TEX Inc., Raleigh NC J. Davis, Teledyne Scientific & Imaging Company, Thousand Oaks, CA D. Dreimeyer, The Boeing Company, St. Louis, MO


14

Tuesday Afternoon, January 25, 2011 Session 2: Hi-Temperature Sensing Materials and Devices – Aero Propulsion 2 Session Chair: Craig Neslen, Air Force Research Laboratory, Wright Patterson AFB, OH Location: Salon I 1:35-1:40pm Introductory Remarks – Session Chair 1:40-2:00pm AFRL Perspectives TBD

C. Neslen, Air Force Research Laboratory, Wright Patterson AFB, OH 2:00-2:30pm Wireless High Temperature Sensing inside Jet Engines

Y. Bayram, E. Walton, M. Walter, E. Lee, J. Friedlander and E. Belknap, The Ohio State University, Columbus, OH S. Gemeny, Syntonics Corporation, Columbia, MD

2:30-3:00pm High Temperature Wireless Acoustic Wave Based Sensor Systems

M. Pereira da Cunha, R. Lad, A. Canabal, S. Moulzolf, T. Moonlight, G. Bernhardt and D. Frankel LASST, University of Maine and also Environetix Technologies Corporation, Orono, ME

3:00-3:20pm BREAK 3:20-3:40pm KYOWA Welded Strain Sensors for Extreme Environment Structural Response Measurements

W. Boles and B. Hauber, Air Force Research Laboratory, Wright Patterson AFB, OH J. Taylor, Selecttech Services Corporation, Dayton, OH J. Sebastian, University of Dayton, Dayton, OH

3:40-4:00pm Evaluation of the Cyclic Durability and Accuracy of Mesoscribe Direct-Write Static Strain Sensors

at Elevated Temperature W. Boles and B. Hauber, Air Force Research Laboratory, Wright Patterson AFB, OH J. Taylor, Selecttech Services Corporation, Dayton, OH J. Sebastian, University of Dayton, Dayton, OH

4:00-4:30pm Long Term Stability of Ceramic Thin Film Thermocouples M. Amani, I. Tougas and O. Gregory, University of Rhode Island, Kingston, RI 4:30-5:00pm Propulsion Sensors and Rotordynamics

J. Lekki and G. Hunter, NASA Glenn Research Center, Cleveland, OH


15

Tuesday Afternoon, January 25, 2011 Session 3: Materials for Extreme Environments Applications – Hypersonic Weapons Session Chairs: Eric Wuchina and Curtis Martin, Naval Surface Warfare Center, Carderock, West Bethesda, MD and Gautham Ramachandran, Lockheed Martin Advanced Technology Center, Palo Alto, CA Location: Jamaica Meeting Room located off of the Hotel Lobby 1:35-1:40pm Introductory Remarks – Session Chair 1:40-2:00pm Thermostructural Analysis and Design of Projectile Materials

H. Jensen and K. Buesking, Materials Research & Design, Inc., Wayne, PA E. Wuchina, Naval Surface Warfare Center, Carderock, West Bethesda, MD

2:00-2:20pm High Temperature Projectile Nosetip Materials

D. Butts, Plasma Processes, Inc., Huntsville, AL 2:20-2:40pm Economical Manufacture of Refractory Ceramic Composite Aerostructure for Missile Defense

Interceptors V. Arrieta, S. Brown and B. Williams, Ultramet, Pacoima, CA K. Buesking, Materials Research & Design, Inc., Wayne, PA M. Droege, Ocellus, Inc., Livermore, CA D. Perry, Missile Defense Agency, Huntsville, AL

2:40-3:00pm Fabrication of Hf-Ta Alloy-Coated Refractory Metals for Pintle Geometries

S. DiPietro, Exothermics, Inc., Amherst, NH 3:00-3:20pm BREAK 3:20-3:40pm Oxide CMCs for High Speed Missile Radomes

R. Jurf, J. Paretti, B. Jackson and V. Parthasarathy, COI Ceramics, Inc. an ATK Affiliate 3:40-4:00pm Arcjet Testing of Nosetip Materials

C. Wanstall, Southern Research Institute, Birmingham, AL S. Monsch, Naval Surface Warfare Center, Dahlgren, Dahlgren, VA K. Buesking, Materials Research & Design, Inc., Wayne, PA

4:00-4:20pm Titanium Alloy Aerospace Components with Lattice Block Structure Produced by E-Beam Rapid

Manufacturing Technique J. Wooten and D. Ciscel, CalRam Inc., Simi Valley, CA

4:20-4:40pm Inorganic Polymer Matrix, Short Fiber Composites for Hypersonic Vehicle GPS Windows

T. Carroll, Triton Systems, Chelmsford, MA

4:40-5:00pm Ceramic Matrix Composite Radomes: Design and Analysis K. Buesking and B. Campanella, Materials Research & Design, Inc., Wayne, PA B. Mangrich, Applied Thin Films, Inc., Evanston, IL


16

Tuesday Evening Events, January 25, 2011 Location: Pavilion

5:00-7:00pm ITAR Restricted Expo Opens Networking Social

7:30-8:30pm Exhibit Breakdown


17

Wednesday Morning, January 26, 2011 Session 1: JANNAF Session Chairs: David Glass, NASA Langley Research Center, Hampton, VA and Ken Davidson, Air Force Research Laboratory, Wright Patterson AFB, OH Location: Salon II

7:30-8:30am Registration and Continental Breakfast

8:35-8:40am Introductory Remarks – Session Chairs

8:40-9:00am Heat Flux Testing of Heat Pipe Cooled Cowl Leading Edges B. Hauber, D. Hart and A. Hicks, Air Force Research Laboratory, Wright Patterson AFB, OH S. Rawal, Lockheed Martin Space Systems Company, Littleton, CO E. Klock-McCook, J. Podhiny and B. Sullivan, Materials Research & Design, Inc., Wayne, PA J. Rosenfeld, Thermacore Inc., Lancaster, PA

9:00-9:20am Test Data Correlation of Heat Pipe Cooled Cowl Leading Edges E. Klock-McCook, J. Podhiny and B. Sullivan, Materials Research & Design, Inc., Wayne, PA S. Rawal, Lockheed Martin Space Systems Company, Littleton, CO J. Rosenfeld, Thermacore Inc., Lancaster, PA B. Hauber, Air Force Research Laboratory, Wright Patterson AFB, OH

9:20-9:40am Helium Diffusion Test Development for Thin Plate C/SiC from 25-1000°C J. Hawbaker and J. Koenig, Southern Research Institute, Birmingham, AL R. Sullivan, NASA Glenn Research Center, Cleveland, OH

9:40-10:00am Combined Thermal-Mechanical Evaluations of Fiber-Optic Strain Sensor on Inconel and C-SiC Ceramic Composite to 1800°F A. Piazza, C. Stephen and L. Hudson, NASA Dryden Flight Research Center, Edwards, CA

10:00-10:20am BREAK 10:20-10:40am Methodology for Non-Destructive Evaluation Techniques of Advanced Composite Materials &

Damage Criteria A. Bhattacharya and W. Purmort, Pratt & Whitney Rocketdyne, Canoga Park, CA

10:40-11:00am Thermal Protection System Materials Integration Evaluation: Methodology and Results

B. Sullivan, C. Iwano and M. Vergo, Materials Research & Design, Inc., Wayne, PA 11:00-11:20am Microstructural Evolution of SiC/SiC Composites Produced by Field Assisted Sintering Technology

J. Singh, S. Gephart and A. Kulkarni, Applied Research Laboratory, Penn State University, University Park, PA A. Calomino, NASA Glenn Research Center, Cleveland, OH D. Brewer, NASA Langley Research Center, Hampton, VA

11:20-11:40am Environmental Degradation and Micro-Crack Formation in Ceramic Matrix Composites with EBC

for Airbreathing Propulsion Systems F. Abdi and C. Godines, Alpha STAR Corporation, Long Beach, CA G. Morscher, University of Akron, Cleveland, OH W. Troha, Technical Consultant, Phoenix, AZ C. Logan, Jr., Pratt & Whitney Rocketdyne, Canoga Park, CA

11:40-12:00 Open

12:00-1:30pm Complimentary Poolside Luncheon on the Pool Deck or Lunch on your own


18

Wednesday Morning, January 26, 2011 Session 2: Hi-Temperature Sensing Materials & Devices – Land Based Power Generation 1 Session Chairs: David Mitchell, Siemens Energy, Inc., Orlando, FL and Susan Maley, DOE National Energy Technology Laboratory, Morgantown, WV Location: Salon I 7:30-8:30am Registration and Continental Breakfast 8:30-8:35am Introductory Remarks - Session Chairs 8:35-9:00am Low Cost Turbine Engine Testbed

T. Brooks, R. Holmes and R. Tryon, VEXTEC Corporation, Brentwood, TN R. Morrissey and C. Neslen, Air Force Research Laboratory, Wright Patterson AFB, OH

9:00-9:30am Sensor Component Qualification Requirements for Turbine Engines’ (Title TBD)

T. Freeman, Rolls-Royce, Indianapolis, IN 10:00-10:30am BREAK 10:30-11:00am DOE Perspectives TBD

S. Maley and R. Romanosky DOE National Energy Technology Laboratory, Morgantown, WV 11:00-11:30am Overview of Advanced Sensors & Diagnostics for Gas Turbines

V. Badami, GE Energy Systems, Schenectady, NY 11:30-12:00pm Open TBD 12:00-1:30pm Complimentary Poolside Luncheon on the Pool Deck or Lunch on your own


19

Wednesday Afternoon, January 26, 2011 Session 1: Ablator Session Chair: Matt Gasch, NASA Ames Research Center, Moffett Field, CA Location: Salon II 1:35-1:40pm Introductory Remarks – Session Chair 1:40-2:00pm Martian Entry Testing in NASA Langley HYMETS Facility

S. Splinter and J. Gragg, NASA Langley Research Center, Hampton, VA C. Szalai, NASA Jet Propulsion Laboratory, Pasadena, CA

2:00-2:20pm Chemistry and Properties of a New Family of Lightweight Advanced Ablators

W. Fan, J. Thornton and M. Stackpoole, NASA Ames Research Center, Moffett Field, CA 2:20-2:40pm Thermal Radiation Testing of Lower-Density Ablators and Systems

W. Congdon, ARA Ablatives Laboratory, Centennial, CO 2:40-3:00pm Flexible Ablators with Polybenzimidazole Fibers

S. White and W. Fan, NASA Ames Research Center, Moffett Field, CA 3:00-3:20pm BREAK 3:20-3:40pm An Investigation of High-Enthalpy CO2-N2 Plasma Flow in a Supersonic Arcjet Facility for Martian-

Type Atmospheres L. Suess and B. Shafer, Jacobs Technology, Houston, TX S. Del Papa, NASA Johnson Space Center, Houston, TX

3:40-4:00pm Inter-Panel Joint Design Trades for Various TDS Dual Layer TPS Applications

J. Crowley, Textron Defense Systems, Boston, MA 4:00-4:20pm Comparison of Ablation Predictions for Carbonaceous Materials Using CEA and JANAF-Based

Species Thermodynamics F. Milos, NASA Ames Research Center, Moffett Field, CA


20

Wednesday Afternoon, January 26, 2011 Session 2: Hi-Temperature Sensing Materials and Devices – Land Based Power Generation 2 Session Chairs: David Mitchell, Siemens Energy, Inc., Orlando, FL and Susan Maley, DOE National Energy Technology Laboratory, Morgantown, WV Location: Salon I 1:35-1:40pm Introductory Remarks – Session Chairs 1:40-2:00pm Presentation TBD 2:00-2:30pm Presentation TBD 2:30-3:00pm Presentation TBD 3:00-3:30pm BREAK 3:30-4:00pm Presentation TBD 4:00-4:30pm Open Discussion?

Moderator: TBD 4:30-5:00pm Hi-Temperature Sensing Materials and Devices Conference Wrap-Up

Moderator: L. Schmidt


21

Thursday Morning, January 27, 2011 Session 1: Hypersonic Vehicle Materials/Structural Evaluations 1 Session Chairs: Anthony Calomino, NASA Glenn Research Center, Cleveland, OH and Craig Stephens, NASA Dryden Flight Research Center, Edwards, CA Location: Salon II 7:30-8:30am Registration and Continental Breakfast 8:35-8:40am Introductory Remarks – Session Chairs 8:40-9:00am Aerogel-Impregnated Ceramic Felts as Lightweight, High-Temperature Insulation

F. Hurwitz, NASA Glenn Research Center, Cleveland, OH H. Guo, Ohio Aerospace Institute, Dayton, OH D. Miller, Michigan State University, East Lansing, MI E. Sheets, Purdue University, West Lafayette, IN K. Newlin, University of Louisville, Louisville, KY

9:00-9:20am Thermally Stable Aluminum Silicate Aerogels as Thermal Protection Materials

W. Rhine, R. Trifu, I. Melnikova and S. White, Aspen Aerogels, Inc., Northborough, MA 9:20-9:40am Passive Thermal management Using Metallic and Ceramic Thin Film Technology for Structural

Components Subjected to Hypersonic Loads P. McElroy, Touchstone Research laboratory, Triadelphia, WV

9:40-10:00am UHT CMCs for Missile Propulsion and Aerothermal Components and Applications

S. Kirkwood, E. Pope, C. Hill, T. Rosengren and K. Ringled, MATECH/GSM, Westlake Village, CA 10:00-10:20am BREAK 10:20-10:40am C-SiC Honeycomb for Advanced Flight Structures

S. Wright, Ultracor, Livermore, CA 10:40-11:00am Structurally Integrated Thermal Protection Systems: Status of NASA ARMD Hypersonics Effort

C. Stephens, NASA Dryden Flight Research Center, Edwards, CA A. Calomino, NASA Glenn Research Center, Cleveland, OH

11:00-11:20am Homogenization of an Integrated Thermal Protection System Sandwich Panel

B. Ravishankar, B. Sankar and R. Haftka, University of Florida, Gainesville, FL 11:20-11:40am Hot Structure Design for Hypersonic Vehicles

D. Howren, K. Hopp and B. Sullivan, Materials Research & Design, Inc., Wayne, PA B. Zuchowski, Lockheed Martin Aeronautics, Palmdale, CA

11:40-12:00 Characterizing Microstructural Variability in Ceramic Matrix Composites

P. Bonacuse, R. Goldberg and S. Mital, NASA Glenn Research Center, Cleveland, Ohio 12:00-1:30pm Lunch on your own


22

Thursday Afternoon, January 27, 2011 Session 1: Hypersonic Vehicle Materials/Structural Evaluations 2 Session Chairs: Anthony Calomino, NASA Glenn Research Center, Cleveland, OH and Craig Stephens, NASA Dryden Flight Research Center, Edwards, CA Location: Salon II 1:35-1:40pm Introductory Remarks – Session Chairs 1:40-2:00pm Effects of Material Microstructure on Elastic Response of Woven Ceramic Matrix Composites

R. Goldberg, S. Mital, J. Lang and P. Bonacuse, NASA Glenn Research Center, Cleveland, OH 2:00-2:20pm Stiffness and Strength Degradation Results of a Finite Element Based Durability Model for CMC

Materials J. Podhiny and B. Sullivan, Materials Research & Design, Inc., Wayne, PA

2:20-2:40pm Compressive Testing of AETB-8 Insulation

M. Dieringer, Case Western Reserve University, Cleveland, OH F. Dynys, NASA Glenn Research Center, Cleveland, OH K. Bird and K. Daryabeigi, NASA Langley, Hampton, VA S. Miller, SMARF, Flagstaff, AZ A. Sayir, NASA Glenn Research Center, Cleveland, OH

2:40-3:00pm Elevated Temperature Lap Shear Testing of an Innovative Ceramic Composite Mechanical Fastener

for High-Temperature Structural Assemblies W. Steffier and T. Engel, Hyper-Therm High-Temperature Composites, Inc. Huntington Beach, CA

3:00-3:20pm BREAK 3:20-3:40pm Modeling and Experimental Results of Vibratory Fatigue Testing of C/SiC Specimens

J. Podhiny and B. Sullivan, Materials Research & Design, Inc., Wayne, PA J. Cuneo and A. Casey, Southern Research Institute, Birmingham, AL

3:40-4:00pm Thermal and Structural Testing of an Alternative X-51A Control Fin Design Using Lower Cost High

Temperature Composite Materials C. Iwano, K. Hopp and B. Sullivan, Materials Research & Design, Inc., Wayne, PA D. Kim, Boeing, Huntington Beach, CA T. Pinney, Boeing, Seal Beach, CA

4:00-4:20pm Testing of an Alternative Composite Control Fin for X-51A

J. Sielski, Air Force Research Center, Wright Patterson AFB, OH 4:20-4:40pm Design, Fabrication and Testing of Non-Parasitic Integrated Acreage TPS/Airframe Material

K. Hopp, C. Iwano and B. Sullivan, Materials Research & Design, Inc., Wayne, PA W. Shih, Allcomp, City of Industry, CA


23

Conference Program Chair Dr. Mark M. Opeka Naval Surface Warfare Center, Carderock Division Code 6170 9500 MacArthur Boulevard West Bethesda, MD 20817-5700 Phone: 301-277-3963 Email: [email protected]

mailto:[email protected]�

[35th annual cocoa beach preliminary program rev#11/jan13...

Documents