FITTING INSTRUCTION FOR LEDGE / DIVE PUSH BUTTON CABINET PULL c/w SPRUNG LATCH & STOP / KEEP

1 Fix Strike Plate (1) into door frame. Position required is thickness of the door plus 8mm into

frame. Select height required for pull and mark 2 pilot holes at 35mm centres.

2 Drill pilot holes 2.5mm diameter x 6.0 deep and fit latch keep using 2 x No 8 x 1” wood screws

provided.

3 Mark vertical line on door 20mm in from edge at height required.

4 Mark centre hole on door to line up with centre of latch.

5 Mark 2 holes, above and below centre hole at 27mm centres.

6 Drill centre hole 11.5mm diameter squarely through door. Carefully avoid splintering on door.

7 Drill 2 holes above and below 5.0mm diameter squarely through door to avoid splintering.

8 Cut thread length on spring latch as shown in Fig. 1 (e.g. if door is 19mm thick ‘x’ should be cut

to 27mm). Push button should protrude 6mm when assembled.

9 Fit push button (4) to spring latch (2) and secure parts (2) and (3) through door using 2 x M4 x

30 countersunk screws provided.

FIXINGS LIST

(A) 2 of #8 x 1” wood screws

(B) 2 of M4 x 30mm c/sk screws

DOOR

THICKNESS

PLUS 8mm

1

2

34

x

X = door thickness + 8mm

Fig. 1

FIXINGS SUPPLIED

A

B

PART NUMBER : 35701

CONTACT

T : +44 (0)1271 325 325

E : sales@turnstyledesigns.com W : www.turnstyledesigns.com

Turnstyle Designs Ltd, Baron Way, Roundswell Business Park, Barnstaple, Devon, EX31 3TB, United Kingdom