35697%20door%20levers%20passage%20pair%20square%20rose%20no

1
CONTACT T : +44 (0)1271 325 325 E : [email protected] W : www.turnstyledesigns.com Turnstyle Designs Ltd, Baron Way, Roundswell Business Park, Barnstaple, Devon, EX31 3TB, United Kingdom FITTING INSTRUCTION FOR DOOR LEVERS ON 52mm SQUARE ROSE PASSAGE PAIR NOT SUPPLIED WITH LATCH 1 If fitting to a new door drill 12mm hole for spindle in correct position based on lock / latch backset. 2 Insert spindle (C) supplied into latch follower with open groove facing down. 3 Place handles over spindle, ensuring correct handle is used for each side of the door. Check for free action. 4 If handles do not fit flush to door cut an equal amount off each end of the spindle (C), in this event you may also need to cut an appropriate amount off the M4 x 60mm through bolts (D). 5 Remove handles. Using allen key (G) provided loosen square rose and remove, taking care not to scratch metal body. 6 (a) If fitting tubular latch mark out hole positions vertically above and below spindle at 41mm centres. Drill 6mm holes squarely from both sides to avoid exit splintering. 6 (b) If fitting a mortice latch or lockcase with thru bolt piercings mark out hole positions horizontally either side of spindle at 41mm centres. Drill 6mm holes squarely from both sides to avoid exit splintering. 7 Place handles onto spindle and fix using M4 x 60mm through bolts (D). Fit self tapping screws into other countersunk holes (E or F depending on door thickness). If mortice case does not have piercings for thru bolts use 4 wood screws per lever. 8 Replace square roses and tighten with allen key (G). 9 Using allen key (B) provided, tighten grub screw at base of handle body. Retain allen key for future use. PART NUMBER : 35697 FIXINGS LIST (A) 1 of M6 grub screw (spare) (B) 1 of M6 allen key (C) 1 of 8 x 8 x 110mm slotted spindle (D) 2 of M4 x 60mm thru bolts (E) 4 of #4 x 19mm wood screws (F) 4 of #4 x 25mm wood screws (G) 1 of M5 allen key (H) 1 of M5 grub screw (spare) A B C D E F G H FIXINGS SUPPLIED C A B D D H A

Upload: net-tecs-internet-solutions-ltd

Post on 07-Mar-2016

213 views

Category:

Documents


0 download

DESCRIPTION

http://www.turnstylemarine.com/downloads/35697%20door%20levers%20passage%20pair%20square%20rose%20no%20lock%20or%20latch.pdf

TRANSCRIPT

CONTACT

T : +44 (0)1271 325 325

E : [email protected] W : www.turnstyledesigns.com

Turnstyle Designs Ltd, Baron Way, Roundswell Business Park, Barnstaple, Devon, EX31 3TB, United Kingdom

FITTING INSTRUCTION FOR DOOR LEVERS ON 52mm SQUARE ROSE – PASSAGE PAIR NOT SUPPLIED WITH LATCH

1 If fitting to a new door drill 12mm hole for spindle in correct position based on lock / latch backset.

2 Insert spindle (C) supplied into latch follower with open groove facing down.

3 Place handles over spindle, ensuring correct handle is used for each side of the door. Check

for free action.

4 If handles do not fit flush to door cut an equal amount off each end of the spindle (C), in this

event you may also need to cut an appropriate amount off the M4 x 60mm through bolts (D).

5 Remove handles. Using allen key (G) provided loosen square rose and remove, taking

care not to scratch metal body.

6 (a) If fitting tubular latch mark out hole positions vertically above and below spindle at

41mm centres. Drill 6mm holes squarely from both sides to avoid exit splintering.

6 (b) If fitting a mortice latch or lockcase with thru bolt piercings mark out hole positions horizontally either

side of spindle at 41mm centres. Drill 6mm holes squarely from both sides to avoid exit splintering.

7 Place handles onto spindle and fix using M4 x 60mm through bolts (D). Fit self tapping screws

into other countersunk holes (E or F depending on door thickness). If mortice case does not have

piercings for thru bolts use 4 wood screws per lever.

8 Replace square roses and tighten with allen key (G).

9 Using allen key (B) provided, tighten grub screw at base of handle body. Retain allen key for

future use.

PART NUMBER : 35697

FIXINGS LIST

(A) 1 of M6 grub screw (spare)

(B) 1 of M6 allen key

(C) 1 of 8 x 8 x 110mm slotted spindle

(D) 2 of M4 x 60mm thru bolts

(E) 4 of #4 x 19mm wood screws

(F) 4 of #4 x 25mm wood screws

(G) 1 of M5 allen key

(H) 1 of M5 grub screw (spare)

A

B

C

D

E

F

G

H

FIXINGS SUPPLIED

C

A B

D

D

H

A