35225224 hettich furniture fittings and applications us stocking catalog
DESCRIPTION
uTRANSCRIPT
www.hettich.com
060075
Furn
iture
Fitt
ings
and
App
licat
ions
–US
Sto
ckin
g Ca
talo
g
FurnitureFittings andApplicationsUS Stocking Catalog
KAT_Umschlag_USA.qxd 01.02.2006 19:27 Uhr Seite 1
Hettich America L.P.6225 Shiloh RoadAlpharetta, GA 30005-2206USA
Telephone: (770) 887-3733In USA: (800) HETTICH (438-8424)Telefax: (770) 887-4479In USA: (800) 627-5152
e-mail: [email protected]: www.hettichamerica.com
KAT_Vorsatz_USA.qxd 01.02.2006 19:24 Uhr Seite 3
Publisher's imprint
© Hettich FurnTech GmbH & Co. KGD-32602 Vlotho
We reserve all rights to this catalogue under copyright law. It shall not be permissible to duplicate this catalogue in any form either in whole or in part without our written consent.
The technical specifications in this catalogue as well as photographs and drawings are not binding.We assume no liability for any misprints or errors that might occur in this catalogue.
February 2006
Order no. 060 075
KAT_Vorsatz_USA.qxd 01.02.2006 19:24 Uhr Seite 4
FurnitureFittings andApplicationsUS Stocking Catalog
KAT_001_008_Vorspann.qxd 02.02.2006 13:15 Uhr Seite 1
How to contact us
Photo: Jim Stawniak
Hettich America L.P.6225 Shiloh RoadAlpharetta, GA 30005-2206USA
Telephone: (770) 887-3733In USA: (800) HETTICH (438-8424)Telefax: (770) 887-4479In USA: (800) 627-5152
e-mail: [email protected]: www.hettichamerica.com
2
KAT_001_008_Vorspann.qxd 02.02.2006 13:15 Uhr Seite 2
Today, the Hettich Internationalbrand is known throughout the globe. It is synonymous with quality, creative design and customer orientation.
Production sites in Germany,Spain, Czech Republic, Brazil, USA,Russia, China and sales companiesin the United Kingdom, France,Italy, Scandinavia, Poland, Slovakia,Canada, Mexico, Japan, Korea,Singapore, India, Australia and New Zealand provide a world-wide network that guarantees proximityto the customer and quality of service.
A strong partnerthe world over.
Production site
Sales company
Hettich America · Alpharetta · Georgia
3
KAT_001_008_Vorspann.qxd 02.02.2006 13:16 Uhr Seite 3
4
How to contact usPage 2
A strong partner the world overPage 3
Program overviewPages 4 - 5
ProDecor Handle CollectionPages 6 -7
21 - 82
Intermat / EcomatFast-assembly hingesPages 21 - 62
OptimatFace frame hingesPages 63 - 66
Selekta Pro 2000Fast-assembly hinges for office and commercial furniturePages 67 - 75
Flush hinge 101Page 76
Folding door hingePage 77
Fascia hingePage 78
Flap hingeMarkant 7.1/11Pages 79 - 80
Klassik DFlap stayPage 81
Lift junior 90/140Top box flap supportPage 82
Hinges and flap fittingsAssembly machinery
9 - 20
Drilling and insertionmachine Blue Max miniPage 10
Drill JigsPage 11
Accura universal templatePages 12 - 17
Practica drawer front templatePage 18
Hole marking gaugesPage 19
Handle Collection
Program overview
KAT_001_008_Vorspann.qxd 02.02.2006 13:16 Uhr Seite 4
5
199 - 275
Program overviewPages 200 - 203
Single Door SetsPages 204 - 225
By-passing Door SetsPages 226 - 241
By-passing Door Setswith FasciaPages 242- 249
Folding Doors ApplicationsPages 250 - 260
Parts & AccessoriesPages 261 - 273
Sheaves and TracksPages 274 - 275
83 - 172
InnoTechDrawer systemPages 83 - 118
Quadro IW 21Partial and full-extensionrunners for wooden drawersPages 119 - 132
Quadro IW 20Partial and full-extensionrunners for wooden drawersPages 133 - 142
MultiTechSteel drawer systemPages 143 - 160
Roller runner systems FRPages 161 - 168
Ball-bearing slides KAPages 169 - 172
173 - 198
Cam fittingsRastex 15Pages 174 - 178VB 35 / 35 M / 36 / 36 MPages 179 - 185
Connecting fitting VB 135for shelvesPage 183
Multi ClipClip connectorPage 186
EverfixNon-release connecting fittingPage 187
Universal corner connectorPage 188
Connecting screwsPage 189
Connecting anglePage 189
Height adjustable legsPages 190 - 193
Shelf supportsPages 194 - 195
Cabinet suspension bracketsPages 196 - 197
Fixing railPage 198
Connecting fittings and accessories
Drawer and runner systems
Grant® - Folding and Sliding Door Hardware
KAT_001_008_Vorspann.qxd 03.02.2006 15:43 Uhr Seite 5
6
ProDecor – Handle Collection
KAT_001_008_Vorspann.qxd 02.02.2006 13:17 Uhr Seite 6
7
Product selectionSearch by• order no.or select by• article type• material• finish• hole spacingto find what you want quicklyand efficiently.
Order no.
Article type: Handle
Material: Aluminium
Finish: any
Hole distance: any
Online support
eCatalogue
www.hettich.com
Start search
Picture
11517 Aluminium handle 288 mm 298 mm
11129 Steel handle 288 mm 298 mm
11130 Steel handle 288 mm 298 mm
11517 Aluminium 382 394handle mm mm
11131 Steel handle 288 mm 298 mm
11134 Steel handle 288 mm 298 mm
Material Holedistance Length
Orderno.
1. Handle search 2. Handle details 3. Handle in 3D 4. Handle on object Handle search
Here you can …search for a knob or handle from our wide assortment with the support ofcertain search criteria.
You can enter known order no. directly into the first field.Searching by article type, material, finish and hole distance helps to findthe handle you are looking for.A list shows all articles matching your search.Clicking ”Show handle” shows all technical details and leads to 3D visualisation.
Chosen handle:
Showhandle
Online support
eCatalogue
www.hettich.com
ZoomMove
+ Shift + STRG
Online-Hilfe
Zum eCatalog
www.hettich.com
1. Handle search 2. Handle details 3. Handle in 3D 4. Handle on object Handle in 3D – Aluminium handle – Order no. 11517
Maniglia sul mobile Save picture
11517 Aluminium 382 394handle mm mm
1. Handle search 2. Handle details 3. Handle in 3D 4. Handle on object Handle on object – Aluminium handle – Order no. 11517
1. Furniture 2. Wood surface 3. Colour surface
Pedestal Oak
Office
New search
Snapshot Save picture
Handle only
Here you can …search for a knob or handle from our wide assortment with thesupport of certain search criteria. You can enter known order no.directly into the first field.Searching by article type, material, finish and hole distancehelps to find the handle you are looking for.A list shows all articles matching your search.
CAD download
4. Room sutuation
5. Further handles
ZoomMoveTurn
+ Shift + STRG
Online support
eCatalogue
www.hettich.com
Product details• Photos• Dimensions• Materials and surface finishes• Technical drawings• Download drawings in DWG
format for use in CAD systems
1. Handle search 2. Handle details 3. Handle in 3D 4. Handle on object Handle details – Aluminium handles – Order no. 11517
Product drawing
Order no. 11517
Packaging unit 1 pcs
Article type Aluminium handle
Base finish -
Hole distance 382 mm
Finish Anodized silver colour
Length 394 mm
Material Aluminium
Rosette finish -
Online support
eCatalogue
www.hettich.com
Photorealistic representation• Photorealistic representation on different items of furniture• Select wood finishes and colours for furniture• Integrate furniture in typical living areas• Generate light, shadow and reflections• Store images as BMP files for post-processing in other programs
www.prodecor.com
3D visualization• Zoom, move and rotate as
necessary • View from any perspective
... your handle consultant on the Internet
Contact us now for yourpersonal copy!
The all new comprehensiveProDecor Handle catalog:
KAT_001_008_Vorspann.qxd 02.02.2006 13:18 Uhr Seite 7
8
KAT_001_008_Vorspann.qxd 02.02.2006 13:18 Uhr Seite 8
9
Assembly machinery
9
KAT_009_020_G2_USA.qxd 01.02.2006 20:33 Uhr Seite 9
10
Blue Max mini Type 3Basic configuration• 6-spindle boring head• Pneumatic stroke movement• Hold down clamp• Machine base, work top• Fence• 2 pendulum stops• Fixed stops• 220 V / 60 Hz / 1-phase or 3-phase• Motor power rating 1.6 kW (2.15 HP)
or 1.3 kW (1.75 HP)• Other voltages and configurations available on request.
Blue Max mini Type 3
Article Order no. PU
Blue Max mini Type 3, 1-phase, TB 43 047 956 1Blue Max mini Type 3, 3-phase, TB 43 052 022 1
Suitable for installing • hinges• connecting fittings• knock-in mounting plates• MultiTech front connector (see accessories)
When ordering a machine just for VB connecting fittings, please specifythis on your order and we will provide the change at no extra charge.
9,5
45
L LR
32
LR
32
R
32
TB 43 Standard drilling pattern hinges
Accessories for Blue Max mini Type 3 Order no. PU
• Fence extension with scale, 1500 mm long, for right-hand/left-hand use 061 266 1
• Pendulum stop for fence, right-hand/left-hand 061 285 1
• Universal die for Intermat, Ecomat,Slide-on and Selekta 4 hinges 078 022 1
• Die for Selekta Pro 2000, hole pattern TB 23 010 080 1
• Die for knock-in mounting plate system 9000 046 796 1
• Die for VB 36 052 997 1
Other dies on request
Accessories for Blue Max mini Type 3 Order no. PU
• Red drill chuck cap 076 497 1
• Drill bits Diameter Length right-hand left-hand PU40 mm 57 mm 069 250 135 mm 57 mm 053 955 120 mm 57 mm 053 953 115 mm 57 mm 053 943 061 651 110 mm 57 mm 053 952 053 951 18 mm 57 mm 053 817 053 818 15 mm 57 mm 053 950 053 949 1
KAT_009_020_G2_USA.qxd 03.02.2006 15:43 Uhr Seite 10
11
Drill-Jigs
Drill-Jig hingeHinge installation made easy: with a standard commercially available power drill and the Drill-Jig hinge, hole patterns can be made everywhere – simply, rationally and precisely.Regardless whether you are retrofitting doors on pre-installed shelves or blind panels, for individual or special applications, the Drill-Jig hinge eliminates the need for unprofitable and time-consuming machine adjustment – simply drill and fit, andthat's it.
• Precise and clean hole drilling for hinges and mounting plates• Angled, precise drilling with tungsten carbide tipped drill bits• No "runaway" of the drill bit when cut-drilling half-moon holes
Drill-Jig hinge can be used for:• Hettich Intermat, Ecomat and Optimat hinges with
hole dimensions TB 43 and TB 42
Mounting platedrilling jig
Hinge drilling pattern
Article For hole dimensions Order no. PU
Drill-Jig hinge TB 43 35 / 2 x 8 047 303 1 setTB 42 35 / 2 x 2,5 047 307 1 set
Article Order no. PU
Drill-Jig VB 020 166 1 set
Set contains: 1 drilling template for hinges1 drilling template for mounting plates1 hexagonal driver1 drill bit, ø 35 mm2 drill bit, ø 8 or 2,5 mm
Drill Jig VB for connecting fittingsAll you need for rapid, rational, simple and at the same time preciseinstallation of Hettich connecting fittings is the Drill-Jig VB drillingjig and a standard commercially available power drill.
• For retrofitting structural shelves and panels• Single or special production• Precise, clean and also angled holes• Tungsten carbide tipped bits• No "runaway" of the drill bit when cut-drilling half-moon holes• Holes spaced at regular 32 mm intervals• Fixed end stop at 37 mm (= distance between hole line and
front side edge)• Drilling diameter 5 mm• For wood thickness of 16/19 and 22 mmDrill-Jig VB can be used for :• Connecting fittings
VB 35/35 M/36/36 M• Connecting fitting VB 135
Drilling templatedowel
Connector drilling jig
Set contains:1 drilling template for VB connecting fittings1 drilling template for dowels1 drill bit ø 10 mm1 drill bit ø 20 mm
for VB 35/35M/36/36M and VB1351 hexagonal driver
• Mounting plate series System 9000
%
45
ø 359,5
C
11,811
ø 2,545
ø 359,5
C
11,811
ø 8
KAT_009_020_G2_USA.qxd 01.02.2006 20:33 Uhr Seite 11
12
Universal drilling templateAccura
mm Inch
� Sleeve drill
� Marking pin
� Accura drilling template for ProDecorhandle collection
� Accura drilling templatefor runner systems
Bolt
� Adjustable stop for individual(un-assembled) carcase sides
� Adjustable stop for assembled carcase
Viewing window for measurement scale
� Accura rail with measurement scale
KAT_009_020_G2_USA.qxd 01.02.2006 20:34 Uhr Seite 12
13
The Accura drilling template for handles and knobs plates can be used with:
• Handles with two or three bases with hole spacing 64 mm or greater
• Furniture knobs
The drilling template for runner systems is used for mounting:
• Roller runner systems FR (402/6142)• Ball-bearing slides KA• Quadro slide-on technology –
partial and full extension
Further functional advantages:
• Drilling template and rail made of aluminium• Sleeve drill – minimal bit wear, because the bit is not
in direct contact with the jig• Stops can be used on left and right• Easy adjustment of the drilling template and stops
by means of clamping screws• Rail with measurement scale• Simple measurement determination via viewing
window in drilling template
Accura, Universal drilling template
Article Order no. PU
� Accura rail with measurement scale, aluminiumLength 500 mm 044 764 1Length 1000 mm 070 263 1Length 1500 mm 070 264 1Length 2000 mm 020 014 1
� Accura drilling template for handles and knobs, aluminium/plastic 044 765 1� Accura drilling template for runner systems
aluminium/plastic 070 265 1� Adjustable stop for assembled carcase, plastic 070 267 1� Adjustable stop for individual (un-assembled) carcase sides, plastic 070 266 1 Sleeve drill ø 3 mm 078 095 1
Spare drill ø 3 mm without sleeve 079 004 1Sleeve drill ø 5 mm 070 268 1Spare drill ø 5 mm without sleeve 070 269 1Sleeve drill ø 8 mm 046 084 1Spare drill ø 8 mm without sleeve 046 628 1Sleeve drill ø 10 mm 078 096 1Spare drill ø 10 mm without sleeve 079 005 1High-powered high-speed steel twist drill (HSS) ø 5 mm 044 766 1
Marking pin for Accura drilling template 046 629 1for guide components
Accura universal drilling template for handles, knobs and runner systems
Accura, the universal drilling template, is the rational, economical, professional fitting aid for the ProDecor handle collection and for runner systems (Quadro, ball bearing slides and roller runners).
KAT_009_020_G2_USA.qxd 01.02.2006 20:34 Uhr Seite 13
14
Article Order no. PU
Accura drilling template set 044 763 1 setfor handles and knobs
High-powered high-speed 044 766 1steel twist drill
2
1
3
4
5
6
7
180
20 30 40 50 60 7080 90 100 110
120 130 140 150 160 170
2
1
3
4
5
6
720 30 40 50 60 7080 90 100 110
120 130 140 150 160 170 180
1
2
20 30 40 50 60 7080 90 100 110
120 130 140 150 160 170
2
1
3
4
5
6
7
180
180
20 30 40 50 60 7080 90 100 110
120 130 140 150 160 170
2
1
3
4
5
6
7
3
Universal drilling template Accura for handles and knobs
Accura drilling template set for handles with hole spacing 64 mm or greater and knobs
Set contains:• 2 Accura drilling templates for handles with hole spacing
64 mm or greater and knobs• 2 drill plates with guide sleeve for 5 mm high-powered
high-speed steel twist drill• 1 Accura slide rail with measuring scale in mm and inch,
length 500 mm• 1 adjustable stop for front edge alignment
Handles with two basescentred or positioned as desired
� Set up drilling template� Adjust hole spacing Adjust handle to front distance� Check hole spacing using feeler gauge
� Drill holes � Screw on handle
KAT_009_020_G2_USA.qxd 01.02.2006 20:34 Uhr Seite 14
15
2
1
3
4
5
6
7
20 30 40 50 60 7080 90 100 110
120 130 140 150 160 170 180
2
1
3
4
5
6
7
20 30 40 50 60 7080 90 100 110
120 130 140 150 160 170 180
2
1
3
4
5
6
7
20 30 40 50 60 7080 90 100 110
120 130 140 150 160 170180
� Set up drilling template� Adjust hole spacing Adjust handle to front
distance� Use measuring
components to check hole spacing
Handles with three basescentred or positioned as desired
� Drill holes� Screw on handle
2
1
3
4
5
6
7
2
1
3
4
5
6
7
20 30 40 50 60 7080 90 100 110
120 130 140 150 160 170 180
20 30 40 50 60 7080 90 100 110
120 130 140 150 160 170180
1
2
3
Two handlesaligned symmetrically
� � Drill holes for first handle Turn drilling jig over� Drill holes for second handle
� Screw on handles
� Set up drilling template� Adjust hole spacing Adjust handle
to front distance� Use measuring
components to check hole spacing
2
1
3
4
5
6
7
20 30 40 50 60 7080 90 100 110
120 130 140 150 160 170 180
2
1
3
4
5
6
7
20 30 40 50 60 7080 90 100 110
120 130 140 150 160 170 180
2
1
3
4
5
6
7
20 30 40 50 60 7080 90 100 110
120 130 140 150 160 170180
3
1
2
2
1
3
4
5
6
7
2
1
3
4
5
6
7
20 30 40 50 60 7080 90 100 110
120 130 140 150 160 170 180
20 30 40 50 60 7080 90 100 110
120 130 140 150 160 170180
3
2
1
KAT_009_020_G2_USA.qxd 01.02.2006 20:34 Uhr Seite 15
16
Universal drilling template Accura for runner systems
16
20
16
3796
128160
192224
256288
320352
32
Cabinet front edge
Drilling positions for• Quadro slide-on technology• Roller runner systems FR• Ball-bearing slides KA
� The adjustable stop is fixed "flush" with the rail:Using the inspection window, you can read off theexact screw-on positions for the individual runnersystems from the rail scale.
� The drilling template and adjustable stop are placed on the bottom panel, thereby permitting interchangeability between the Quadro 30 partial extension and Quadro V6 full extension runnerwhilst maintaining the same position for the drawer/front panel.
41 16
36 3636
KAT_009_020_G2_USA.qxd 01.02.2006 20:34 Uhr Seite 16
17
Article Order no. PU
Sleeve drill ø 5 mm 070 268 1Spare drill ø 5 mm, without sleeve 070 269 1Sleeve drill ø 10 mm 078 096 1Spare drill ø 10 mm, without sleeve 079 005 1
Accura drilling template for System 32 hole line
Accura drilling template for System 32 hole linesDrilling template 1000 mm, aluminium with 4 stop pins/marking pins. Enables you to drill a hole line in System 32rationally, economically and expertly with sleevedrills (to be ordered separately, see below).
Applications• Hole line spaced
37 mm from front edge• Hole line at a distance of
13 mm from the front edge(office applications: Top 2000 pedestal)
• Drilling the first hole line for connecting fittings(for 16 mm and 19 mm panel thickness)
• Stop for continuing hole line• Stop for rear hole line
in assembled cabinet
Further functional advantages:• Can be used for left and right• Functions easily set using stop/rig pins
Sleeve drills for• Practica front template• Accura drilling template
Article Order no. PU
Accura drilling template for System 32 hole lines 010 573 1 set
Accura drilling template for System 32 hole lines
ø5
1000
37
97
32 32
8,5
10
32
13
37
32
3237
10
13
8,5
20
37
20
13
37
3232
� �
�
��
��
�
�
�
29 holes in 32 mm spacing ±0,1
� Stop for front edge of cabinet side hole line at distance of 37 mm from the front edge
� Stop for bottom edge of cabinet side first hole line drilling at 8 mmfor 16 mm panel with connecting fittings
� Stop for bottom edge of the cabinet side first hole line drilling at 10 mmfor 19 mm panel with connecting fittings
� Stop for continuing the hole line. The pin is inserted in the last hole in the line.
� Rear edge of drilling template for drilling therear hole line in a ready assembled cabinetThe distance to the back panel is 37 mm.
• Bit wear is minimised, as the bits do not come into contact with the template
• Sleeve for precise drill guidance• Adjustable drilling depth stop
ø5
KAT_009_020_G2_USA.qxd 01.02.2006 20:34 Uhr Seite 17
18
Practica drawer front template
Practica angle stopperFor precise installation of front panel fixings in combination with Practica drilling templates(see below) and sleeve drills (see page 13)Made of aluminium
Article Order no. PU
Practica- universal angle stopper 078 093 1
Article Order no. PU
Practica drilling template InnoTech drawer system 013 392 1
Practica drilling template InnoTech drawer systemFor installing the front panel fixings for• InnoTech drawer• InnoTech pot-and-pan drawer• InnoTech pot-and-pan drawer
with 2nd railing levelRange of adjustment• Side overlay of front panel:
up to –6 mm to +20 mm• Front panel height:
from bottom edge of bottom panel up to +35 mm
Made of aluminium
up to +20
up to –6
2
1
3
up to +35
Practica drilling template MultiTech drawer systemFor installing the front panel fixingsfor• MultiTech drawer
height 54, 86, 118 and 150 mm• MultiTech pot-and-pan drawerRange of adjustment• Side overlay of front panel:
up to +20 mm• Front panel height:
from bottom edge of bottom panel up to +35 mm
Made of aluminium
up to +20
up to +35Article Order no. PU
Practica drilling template MultiTech drawer system 079 637 1
KAT_009_020_G2_USA.qxd 01.02.2006 20:34 Uhr Seite 18
19
ø 5
32
37
Hole marking gauges
Hole marking gauge for handlesTwo-dimensional hole marking gauge for hole marking of:• System 32 hole lines for
• Handles• Knobs
for hole line with 32 mm spacing up to 320 mm
Range of adjustment:side distance 10 - 334 mm to the first hole punch,height distance 20 - 65 mm
Article Order no. PU
Hole marking gaugefor handles 048 771 1
160 192 224 256 288 320128966432
20
60
50
40
30
20 40 60 80 100 120 140 160 180 200 210 220 240 260 280 300 320 340
20 - 65
10 - 334
0
Multi Blue hole marking gaugeSmall and easy to use, yet multifunctional, the simple Multi Blue hole marking gauge is the perfect aid to on-site assembly whenever a fitting has to be professionally mounted without the help of large machinery.
Can be used for marking out:Different mounting plate versions• System 9000 – Intermat- and Ecomat-hinges• Hettich Direkt Top
Fittings assembled in System 32• Screw-in dowel• End and double dowel for Rastex• Shelf support
Article Order no. PU
Multi Blue hole marking gauge 000 351 1
37
21,5
37
9,5
Hinges• Intermat• Ecomat
Connecting fittings• VB 35 M• VB 135
ø 35
21,5
4
9,5+0,5
ø20
KAT_009_020_G2_USA.qxd 01.02.2006 20:35 Uhr Seite 19
20
KAT_009_020_G2_USA.qxd 01.02.2006 20:35 Uhr Seite 20
Intermat/EcomatFast assembly hinges
21
KAT_021_036_G3_USA.qxd 01.02.2006 0:05 Uhr Seite 21
22
Intermat - maintenance-f
Eccentric height adjustmentExact door height alignmentwithout loosening screws
Intermat is sophisticated hinge
technology made by Hettich.
Its external appearance indicates
quality. Long service life
and great ease of use
round off the hinge profile.
KAT_021_036_G3_USA.qxd 01.02.2006 0:05 Uhr Seite 22
23
-free, robust, quiet, reliable!
3 mmSuperflat cup designHuge product range with over 100 mounting options
Concealed latchsimple, safe, reliable
Eccentric depth adjustmentExact door depth alignmentwithout loosening screws
KAT_021_036_G3_USA.qxd 01.02.2006 0:05 Uhr Seite 23
Hettich Face Frame
The Hettich face frame mounting plates enable you tocombine high end European hinge technology and faceframe cabinetry.
In addition cam adjustment features allow you to be flexible and precise.
Together with Hettich Intermat or Ecomat hinges this mounting plate offers you variety of door design possibilities.
24
Mounting plate for overlay constructionwith eccentric height adjustment!
± 2 mm
KAT_021_036_G3_USA.qxd 02.02.2006 23:03 Uhr Seite 24
Hettich Face Frame
Hettich Face Frame mounting plate for inset constructionenables you to build your face frame cabinets.
Adjustment via excentric cam makes it easy to find the right position of the door.
Flexible, fast adjustment offers you a variety of door design possibilities.
25
Mounting plate for inset constructionwith eccentric height adjustment!
± 2 mm
KAT_021_036_G3_USA.qxd 02.02.2006 20:03 Uhr Seite 25
Hettich Direkt TopThe patented screw-on cross mounting plate with eccentric height adjustment!
min.15
ø5
37
37
min.15
ø5
7,5
The Hettich Direkt Top fixing system
patented
26
Hettich Direkt is a clever method of fixing mounting plates, used especially for half overlay mounting. The screw holes are slightly offset so that when mounting to a centre panel with a thickness from 15 mm,a firm fixing with high tear-out strength is guaranteed.
Cost savings during assembly: The "Hettich Direkt" mounting plate is provided with pre-mounted locating pegs and asymmetrically positioned special screws. It is simply inserted into the ø 5 mm hole line and fits firmly even before being screw fixed.
This simplifies assembly not only of the centre panel, but also in the cabinet area.
KAT_021_036_G3_USA.qxd 01.02.2006 0:06 Uhr Seite 26
27
Hettich TopThe screw-on cross mounting plate with pre-mounted self-tapping screws and eccentric height adjustment!
Cabinet doors can be aligned with a hand movement - it's no problem with the eccentric adjustment system from Hettich.
A perfect reveal cannot be achieved more quickly, directly or indeed more safely, as the fastening screws do not need to be released beforehand.
The height adjustment is realized via the integrated eccenter in the mounting plate. The five versions available from Hettich cover different mounting variants. The depth adjustment of a cabinet door is done through the eccenter in the hinge.
Only a screwdriver is required to precisely adjust the height and depth. A short turn and all doors form a perfect line.
15 37
± 2 mm
KAT_021_036_G3_USA.qxd 01.02.2006 0:07 Uhr Seite 27
28
Silent System The perfect cushioning systemcontrols furniture door closure gently and quietly.
Clip-on door buffer
• Simply clips on
• No additional steps in manufacture
• A simple screw enables step-less adjustment of the cushioning function
• Toolless assembly and disassembly
• Door buffer identical for left and right-hand mounted doors
• Can be retrofitted to tried and tested Intermat and Ecomat hinges
Convenience for the customer – Solutions for every application:
Screw-on door buffer for overlay and inset doors
• Fastens to upper or lower cabinet panel
• No additional steps in manufacture
• A simple screw enables step-less adjustment of the cushioning function
• Can be retrofitted to tried and tested Intermat and Ecomat hinges
Drill-in door buffer for overlay doors
• Fits almost invisibly into the lower or upper panel: discreet, yet efficient
• Can also be retrofitted to existing cabinets
• To fit, simply insert into a 10 mm dia. hole
• For use with Intermat or Ecomat hinges
KAT_021_036_G3_USA.qxd 01.02.2006 0:07 Uhr Seite 28
ø 10
50
0,9
Z
ø 10
50
0,9
Z
20
max.75
100,9
X7min.69X17
14,5
34
Countersunkscrew ø 4 x 17 mm
20
max75
10
X7min69
0,9
17
14,5
34
X
Countersunkscrew ø 4 x 17 mm
29
Silent System for Intermat and Ecomat hingesTechnical information
Clip-on door buffer Silent System
for overlay doors (cranking 0 and 9,5 mm), inset doors (cranking 16 mm) and for use with Intermat and Ecomat hinges.
A simple screw enables step-less adjustment of the cushioning function.
Grey plastic
Screw-on door buffer Silent System
for overlay and inset doors and for use with Intermat and Ecomat hinges.
A simple screw enables step-less adjustment of the cushioning function.Grey plastic
Assembly
Dimension X = distance from mounting plate + hinge cranking
2 / 3
2
1
1
X
Drill-in door buffer Silent System
for overlay doors and for use with Intermat and Ecomat hinges.
Grey plastic
Assembly
Guide values for 19 mm chipboard panels with a density of 750 kg/m3
Door
hei
ghts
up
to
2400
2000
1600
900
Door width up to 600 mm
Recommended number of buffers per door
Dimension Z = 17 + distance from mounting plate + hinge cranking
Assembly
Disassembly
KAT_021_036_G3_USA.qxd 01.02.2006 0:08 Uhr Seite 29
30
Intermat/EcomatCup TB 42Screw-on
Cup TB 43Press-in
3 mm 3 mm
Cup TB 42
45
ø 359,5
C
12,811
ø8
Cup TB 43
45
ø 35C
9,5
12,811,8 11,8
KAT_021_036_G3_USA.qxd 01.02.2006 0:09 Uhr Seite 30
31
All mounting variants and drill pattern hole dimension at a glance
Cup TB FIXToolless fast assembly
Special solutions forglass doors
Cup T 1for glass doors
45
ø 359,5
C
11,86
ø8
3 mm
5,5 +0,5ø 26
4 - 6,5 mm
CupTB FIX
KAT_021_036_G3_USA.qxd 01.02.2006 0:09 Uhr Seite 31
32
5
4
3
2
X
min
. 90
mm
C
Technical information
Minimum door reveal
Minimum door revealat least 2 x door deflection
Mounting optionsThere are three basic methods of mounting hinges
Minimum door revealThe minimum reveal, also called door deflection, is the space required for opening a door.The amount of reveal depends on the cup distance C, the doorthickness and the hinge type. Chamfered door edges reduce the reveal required. The required minimum reveal can be derived from the table providedfor each hinge.
Minimum door reveal for half overlayFor half overlay configurations, the total reveal between the doorsmust be chosen to correspond to twice the door reveal. Both doorscan then be opened at the same time.
InsetIn this configuration, the door is positionedinside the side wall of the cabinet. A reveal is required for opening the door. This configuration necessitates the use of heavilycranked hinges.
Half overlayIn this configuration, two doors are
positioned in front of the middle wall of a cabinet. The distance between
the doors is the total required reveal. The door overlay is reduced which
necessitates the use of cranked hinges.
Full overlayIn this configuration, the door is positioned infront of a side wall of the cabinet. The reveal at one side is such that the door can be opened safely.
up t
o 20
00
Door
hei
ghts
Reveal
Number of hinges per door:Door width, door height, door weight plus material quality of the door are key factors for determining the required number of hinges. In practice, these factors are very variable.The numbers given in the diagram are for reference only. A trial mounting is recommendedif in doubt.For stability, the distance between hinges should be chosen as large as possible.
X = distance between two hinges(Reference values for 19 mm thick chipboard with a density of 750 kg/m3)
Cup distance CThe cup distance C is the distance between theedge of the door and the edge of the cup hole.The maximum cup distance depends on thehinge in question.The larger the cup distance, the smaller therequired minimum reveal.
Overlay (Door overlay)The overlay is the distance by which the door projects over the cabinet front.
RevealThe reveal is the distance between the outer edge of the door and the outer side of thecabinet (full overlay), the distance betweentwo doors (half overlay), the distance betweenthe outer edge of the door and the inner sideof the cabinet (inset).
i
Overlay
Door width up to 600 mm
up t
o 90
0up
to1
600
up t
o 24
00
KAT_021_036_G3_USA.qxd 01.02.2006 0:09 Uhr Seite 32
33
222
1
3
2
12
i
Depth adjustment
Height adjustment
Overlay adjustment
Door adjustment
Technical informationIntermatFast-assembly hinges
Example: Intermat 9943 - Full overlayFixed sizes Overlay 14,5 mm
Cup distance 4,5 mmThe table shows a Distance (D) of 3 mm
DistanceMounting plates are available in various thicknesses withan effective height characterized by the value of thedistance.Starting point for calculating the required distance is theselected hinge with defined door overlay.Using planned cup distance and door thickness, first readthe required reveal value from the table. If this value is toolarge for the desired overlay, it can be reduced either byincreasing the cup distance C or by chamfering the dooredge.
Once the door reveal and cup distance C have beendefined, the mounting plate distance can be derived fromthe table.
If the distance value deviates from the actual mountingplate distance shown in the catalogue, the difference canbe compensated by turning the overlay adjustment screw.
Direct, variable depth adjustment with the eccentric screw
Turn screw clockwise: Door overlay decreases (-).Turn screw anticlockwise:Door overlay increases (+).
Using height-adjustable mounting platesmakes it possible to align the exact door height.
Distance (D)
DoorReveal
Overlay
Side
Cup distance C
± 2 mm± 2 mm
-0,5 mm+3,5 mm
IntermatSnap-on assembly, disassemblyCharacteristic for Intermat hinges is the ergonomical snap-on assembly. The hinge is slipped into the front of themounting plate (1), then a light finger pressure and the hingearm latches onto the mounting plate (2) with an audible click.
The hinge arm is now securely clamped, via five points, with zero play.
Doors are clipped on zipper style from top to bottom - the top hinge alone is capable of taking the total weight of the door.
Disassembly is carried out in the opposite direction from bottom to top.
The hinge is unlatched by pressing lightly on latch (1) which is hidden under the side arm for security reasons.
In one movement, the hinge arm is lifted off the mounting plate (2) and the door is removed from the cabinet (3).
Direct, variable height adjustment with eccentric screw
When using Ecomat and linear mounting plates with eccentric height adjustment, the hinge has to be moved out of the way in order to adjust the height.
D Overlay mm0 16 17 17,5 18 191,5 14,5 15,5 16 16,5 17,53 13 14 14,5 15 164,5 11,5 12,5 13 13,5 14,58 8 9 9,5 10 11
3 4 4,5 5 6Cup distance C mm
KAT_021_036_G3_USA.qxd 01.02.2006 0:09 Uhr Seite 33
Full overlay
Full overlay Reveal Reveal
Half overlay Inset
34
Technical informationDetermine construction
Face Frame Frameless
Step 1: Determine cabinetconstruction
Step 2: Determine mounting option
Step 3: Cup distance
Step 4: Check minimum reveal
Step 5: Select hinge
For more technical information onSilent System refer to page 29
Step 6: Choose Silent System
The minimum reveal is reduced for doors with radii: 1 mm radius: table entry – 0,4 mm
3 mm radius: table entry – 1,2 mm
The minimum reveal is reduced for doors with radii: 1 mm radius: table entry – 0,4 mm
3 mm radius: table entry – 1,2 mm
Step 4: Check minimum reveal
Step 3: Cup distance
Full overlay
Full overlay Half overlay Reveal
Half overlay Inset
Step 2: Determine mounting option
Step 1: Determine cabinetconstruction
i
Distance (D)
Door
Overlay
Side
Cup distance C
D Overlay mm0 16 17 17,5 18 191,5 14,5 15,5 16 16,5 17,53 13 14 14,5 15 164,5 11,5 12,5 13 13,5 14,58 8 9 9,5 10 11
3 4 4,5 5 6Cup distance C mm
D Overlay mm0 16 17 17,5 18 191,5 14,5 15,5 16 16,5 17,53 13 14 14,5 15 164,5 11,5 12,5 13 13,5 14,58 8 9 9,5 10 11
3 4 4,5 5 6Cup distance C mm
Distance (D)
DoorOverlay
Side
Cup distance C
Door
Side
Reveal
Minimum revealCup distance Door thickness mmC mm 16 17 18 19 203 0,6 0,8 1,1 1,5 1,94 0,5 0,7 1,0 1,4 1,84,5 0,5 0,7 1,0 1,4 1,85 0,5 0,7 1,0 1,4 1,86 0,5 0,7 1,0 1,4 1,7
Minimum revealCup distance Door thickness mmC mm 16 17 18 19 203 0,6 0,8 1,1 1,5 1,94 0,5 0,7 1,0 1,4 1,84,5 0,5 0,7 1,0 1,4 1,85 0,5 0,7 1,0 1,4 1,86 0,5 0,7 1,0 1,4 1,7
Side
Reveal
Door
PU 200
TB 42 (screw-on) 1 073 711TB 43 (press-in) 1 029 522TB FIX (toolless) 1 063 453
Full overlay
Door buffer Silent System (grey)
clip-on screw-on drill-in
9 015 112 9 015 115 9 013 069
PU: 400 PU: 400 PU: 800
Step 5: Select hinge
For more technical information onSilent System refer to page 29
Step 6: Choose Silent System
PU 200
TB 42 (screw-on) 1 073 711TB 43 (press-in) 1 029 522TB FIX (toolless) 1 063 453
Full overlay
Door buffer Silent System (grey)
clip-on screw-on drill-in
9 015 112 9 015 115 9 013 069
PU: 400 PU: 400 PU: 800
Face Frame Frameless
KAT_021_036_G3_USA.qxd 01.02.2006 0:09 Uhr Seite 34
35
. . . is an easy task. You will find the right solution for face frame construction as well as for frameless cabinets. All neccessary information on Intermat, Ecomat andSilent System is available on one page.
Face Frame Frameless
To use hinges in a faceframe construction refer to this column
iTechnical informationFinding the right hinge
110°
H
65
T
Distance (D)
DoorOverlay
Side
Cup distance C
Cup distance C
Distance (D)
Overlay
Door
Side
Distance (D)
Side
Reveal
Door
Cup distance C
11,8
11,8
11,8
37
Intermat 9943Fast-assembly hingeOpening angle 110°
Door thickness from 15 mm
Concealed hinge with snap-on assembly, integrated door overlay and eccentric depth adjustmentOpening angle 110°, cup diameter 35 mmShallow hole depth for door thickness min. of 15 mmIntermat 9943 hinges are snapped on to the mounting plateDepth adjustment via eccentric screw -0,5 mm/+3,5 mm Height adjustment via mounting plate +2 mm/–2 mmOverlay adjustment +0,5 mm/-3 mm
Mounting plates page 57-60Cover caps, accessories page 61
For more technical information refer to page 32-36
Mounting plate distances (D):Face frame: 0 mm; 4,5 mmFrameless: 0 mm; 1,5 mm; 3 mm; 5 mm; 8 mm
110°
Doorprotrusion T for 0 mmdistance and 3 mm cupdistance
Side
Door
Mounting H Toption mm mm
Full overlay 18,5 7Half overlay 28 16,5Inset 34,5 23
Face Frame FramelessCabinet construction
Minimum revealCup distance Door thickness mmC mm 16 17 18 19 203 0,6 0,8 1,1 1,5 1,94 0,5 0,7 1,0 1,4 1,84,5 0,5 0,7 1,0 1,4 1,85 0,5 0,7 1,0 1,4 1,86 0,5 0,7 1,0 1,4 1,7
D Overlay mm0 16 17 17,5 18 191,5 14,5 15,5 16 16,5 17,53 13 14 14,5 15 165 11 12 12,5 13 148 8 9 9,5 10 11
3 4 4,5 5 6
D Overlay mm1,5 5 6 6,5 7 8
3 4 4,5 5 6
D Reveal mm Side3 9 7 6 5 3 163 12 10 9 8 6 19
3 4 4,5 5 6
Cup distance C mm
D Reveal mm5 5 4 3,5 3 2
3 4 4,5 5 6
Cupdistance C
Distance (D)Distance (D)
Overlay
DoorDoor
Reveal
Side
Distance (D)
DoorReveal
Overlay
Side
Cup distance C
Distance (D)
Side
RevealDoor
Cup distance C
Cup distance C mm
Cup distance C mmCup distance C mm
For face frame application use half cranked hinge
11,8
11,8
11,8
PU 200
TB 42 (screw-on) 1 073 711TB 43 (press-in) 1 029 522TB FIX (toolless) 1 063 453
Full overlay Door buffer Silent System (grey)
clip-on screw-on drill-in
9 015 112 9 015 115 9 013 069
PU: 400 PU: 400 PU: 800
PU 200
TB 42 (screw-on) 9 046 806TB 43 (press-in) 1 030 921TB FIX (toolless) 1 063 456
Half overlay Door buffer Silent System (grey)
clip-on screw-on drill-in
9 038 342 9 015 115 9 013 069
PU: 400 PU: 400 PU: 800
PU 200
TB 42 (screw-on) 9 046 807TB 43 (press-in) 1 030 925TB FIX (toolless) 1 063 458
Inset Door buffer Silent System (grey)
clip-on screw-on
9 038 343 9 027 941
PU: 400 PU: 50
To use hinges in a frameless construction refer to this column
Tables and order numbersOn the right side you will find all tables to determine overlay, reveal and minimum reveal.Order numbers for hinges and Silent System can also be found here.
KAT_021_036_G3_USA.qxd 01.02.2006 0:10 Uhr Seite 35
36
Step 1Determine cabinetconstruction
Step 2Determine mounting option
Step 5Select hinge
iTechnical informationFinding the right hinge
110°
H
65
T
Distance (D)
DoorOverlay
Side
Cup distance C
Cup distance C
Distance (D)
Overlay
Door
Side
Distance (D)
Side
Reveal
Door
Cup distance C
11,8
11,8
11,8
37
Intermat 9943Fast-assembly hingeOpening angle 110°
Door thickness from 15 mm
Concealed hinge with snap-on assembly, integrated door overlay and eccentric depth adjustmentOpening angle 110°, cup diameter 35 mmShallow hole depth for door thickness min. of 15 mmIntermat 9943 hinges are snapped on to the mounting plateDepth adjustment via eccentric screw -0,5 mm/+3,5 mm Height adjustment via mounting plate +2 mm/–2 mmOverlay adjustment +0,5 mm/-3 mm
Mounting plates page 57-60Cover caps, accessories page 61
For more technical information refer to page 32-36
Mounting plate distances (D):Face frame: 0 mm; 4,5 mmFrameless: 0 mm; 1,5 mm; 3 mm; 5 mm; 8 mm
110°
Doorprotrusion T for 0 mmdistance and 3 mm cupdistance
Side
Door
Mounting H Toption mm mm
Full overlay 18,5 7Half overlay 28 16,5Inset 34,5 23
Face Frame FramelessCabinet construction
Minimum revealCup distance Door thickness mmC mm 16 17 18 19 203 0,6 0,8 1,1 1,5 1,94 0,5 0,7 1,0 1,4 1,84,5 0,5 0,7 1,0 1,4 1,85 0,5 0,7 1,0 1,4 1,86 0,5 0,7 1,0 1,4 1,7
D Overlay mm0 16 17 17,5 18 191,5 14,5 15,5 16 16,5 17,53 13 14 14,5 15 165 11 12 12,5 13 148 8 9 9,5 10 11
3 4 4,5 5 6
D Overlay mm1,5 5 6 6,5 7 8
3 4 4,5 5 6
D Reveal mm Side3 9 7 6 5 3 163 12 10 9 8 6 19
3 4 4,5 5 6
Cup distance C mm
D Reveal mm5 5 4 3,5 3 2
3 4 4,5 5 6
Cupdistance C
Distance (D)Distance (D)
Overlay
DoorDoor
Reveal
Side
Distance (D)
DoorReveal
Overlay
Side
Cup distance C
Distance (D)
Side
RevealDoor
Cup distance C
Cup distance C mm
Cup distance C mmCup distance C mm
For face frame application use half cranked hinge
11,8
11,8
11,8
PU 200
TB 42 (screw-on) 1 073 711TB 43 (press-in) 1 029 522TB FIX (toolless) 1 063 453
Full overlay Door buffer Silent System (grey)
clip-on screw-on drill-in
9 015 112 9 015 115 9 013 069
PU: 400 PU: 400 PU: 800
PU 200
TB 42 (screw-on) 9 046 806TB 43 (press-in) 1 030 921TB FIX (toolless) 1 063 456
Half overlay Door buffer Silent System (grey)
clip-on screw-on drill-in
9 038 342 9 015 115 9 013 069
PU: 400 PU: 400 PU: 800
PU 200
TB 42 (screw-on) 9 046 807TB 43 (press-in) 1 030 925TB FIX (toolless) 1 063 458
Inset Door buffer Silent System (grey)
clip-on screw-on
9 038 343 9 027 941
PU: 400 PU: 50
Step 6Choose Silent System
Step 3Find cup distances and mounting plate
Step 4Check minimum reveal
KAT_021_036_G3_USA.qxd 01.02.2006 0:10 Uhr Seite 36
110°
H
65
T
Distance (D)
DoorOverlay
Side
Cup distance C
Cup distance C
Distance (D)
Overlay
Door
Side
Distance (D)
Side
Reveal
Door
Cup distance C
11,8
11,8
11,8
37
Intermat 9943Fast-assembly hingeOpening angle 110°
Door thickness from 15 mm
Concealed hinge with snap-on assembly, integrated door overlay and eccentric depth adjustmentOpening angle 110°, cup diameter 35 mmShallow hole depth for door thickness min. of 15 mmIntermat 9943 hinges are snapped on to the mounting plateDepth adjustment via eccentric screw -0,5 mm/+3,5 mm Height adjustment via mounting plate +2 mm/–2 mmOverlay adjustment +0,5 mm/-3 mm
Mounting plates page 57-60Cover caps, accessories page 61
For more technical information refer to page 32-36
Mounting plate distances (D):Face frame: 0 mm; 4,5 mmFrameless: 0 mm; 1,5 mm; 3 mm; 5 mm; 8 mm
110°
Door protrusion T for 0 mmdistance and 3 mm cupdistance
Side
Door
Mounting H Toption mm mm
Full overlay 18,5 7Half overlay 28 16,5Inset 34,5 23
Face Frame FramelessCabinet construction
Minimum revealCup distance Door thickness mmC mm 16 17 18 19 203 0,6 0,8 1,1 1,5 1,94 0,5 0,7 1,0 1,4 1,84,5 0,5 0,7 1,0 1,4 1,85 0,5 0,7 1,0 1,4 1,86 0,5 0,7 1,0 1,4 1,7
D Overlay mm0 16 17 17,5 18 191,5 14,5 15,5 16 16,5 17,53 13 14 14,5 15 165 11 12 12,5 13 148 8 9 9,5 10 11
3 4 4,5 5 6
D Overlay mm1,5 5 6 6,5 7 8
3 4 4,5 5 6
D Reveal mm Side3 9 7 6 5 3 163 12 10 9 8 6 19
3 4 4,5 5 6
Cup distance C mm
D Reveal mm5 5 4 3,5 3 2
3 4 4,5 5 6
Cup distance C
Distance (D)Distance (D)
Overlay
DoorDoor
Reveal
Side
Distance (D)
DoorReveal
Overlay
Side
Cup distance C
Distance (D)
Side
RevealDoor
Cup distance C
Cup distance C mm
Cup distance C mmCup distance C mm
For face frame application use half cranked hinge
11,8
11,8
11,8
PU 200
TB 42 (screw-on) 1 073 711TB 43 (press-in) 1 029 522TB FIX (toolless) 1 063 453
Full overlay Door buffer Silent System (grey)
clip-on screw-on drill-in
9 015 112 9 015 115 9 013 069
PU: 400 PU: 400 PU: 800
PU 200
TB 42 (screw-on) 9 046 806TB 43 (press-in) 1 030 921TB FIX (toolless) 1 063 456
Half overlay Door buffer Silent System (grey)
clip-on screw-on drill-in
9 038 342 9 015 115 9 013 069
PU: 400 PU: 400 PU: 800
PU 200
TB 42 (screw-on) 9 046 807TB 43 (press-in) 1 030 925TB FIX (toolless) 1 063 458
Inset Door buffer Silent System (grey)
clip-on screw-on
9 038 343 9 027 941
PU: 400 PU: 50
KAT_037_050_G3_USA.qxd 01.02.2006 0:15 Uhr Seite 37
Distance (D)
DoorOverlay
Side
Cup distance C
Cup distance C
Distance (D)
Overlay
Door
Side
Distance (D)
Side
Reveal
Door11,8
11,8
11,8
Cup distance C
11,8
11,8
11,8
110°
H
60
T
38
Ecomat 9843Fast-assembly hingeOpening angle 110°
Door thickness from 15 mm
Concealed hinges, snap-on assembly, integrated door overlay and depth adjustmentOpening angle 110°, cup diameter 35 mmShallow hole depth for door thickness min. of 15 mmEcomat 9843 hinges are snapped on to the mounting plateDepth adjustment +2 mm/-2 mm. Height adjustment via mounting plate +2 mm/–2 mmOverlay adjustment +0,5 mm/-3 mm
Mounting plate distances (D):Face frame: 0 mm; 4,5 mmFrameless: 0 mm; 1,5 mm; 3 mm; 5 mm; 8 mm
110°
Door protrusion T for 0 mmdistance and 3 mm cupdistance
Side
Door
Face Frame FramelessCabinet construction
Minimum revealCup distance Door thickness mmC mm 16 17 18 19 203 0,6 0,8 1,1 1,5 1,94 0,5 0,7 1,0 1,4 1,84,5 0,5 0,7 1,0 1,4 1,85 0,5 0,7 1,0 1,4 1,86 0,5 0,7 1,0 1,4 1,7
D Overlay mm0 16 17 17,5 18 191,5 14,5 15,5 16 16,5 17,53 13 14 14,5 15 165 11 12 12,5 13 148 8 9 9,5 10 11
3 4 4,5 5 6
D Overlay mm1,5 5 6 6,5 7 8
3 4 4,5 5 6
D Reveal mm Side3 9 7 6 5 3 163 12 10 9 8 6 19
3 4 4,5 5 6
Cup distance C mm
D Reveal mm5 5 4 3,5 3 2
3 4 4,5 5 6
Cup distance C mm
Cup distance C mmCup distance C mm
Distance (D)
DoorReveal
Overlay
Side
Cup distance C
Cup distance C
Distance (D)
Overlay
DoorDoor
Reveal
Side
Distance (D)
Distance (D)
Side
RevealDoor
Cup distance CFor face frame application use half cranked hinge
Mounting H Toption mm mm
Full overlay 18,5 7Half overlay 28 16,5Inset 34,5 23
Mounting plates page 57-60Cover caps, accessories page 61
For more technical information refer to page 32-36
PU 200
TB 42 (screw-on) 1 082 693TB 43 (press-in) 1 072 960TB FIX (toolless) 1 073 353
Full overlay Door buffer Silent System (grey)
clip-on screw-on drill-in
9 038 346 9 015 115 9 013 069
PU: 400 PU: 400 PU: 800
PU 200
TB 42 (screw-on) 9 046 808TB 43 (press-in) 1 072 961TB FIX (toolless) 1 073 354
Half overlay Door buffer Silent System (grey)
clip-on screw-on drill-in
9 038 347 9 015 115 9 013 069
PU: 400 PU: 400 PU: 800
PU 200
TB 42 (screw-on) 9 027 876TB 43 (press-in) 1 072 962TB FIX (toolless) 1 073 355
Inset Door buffer Silent System (grey)
clip-on screw-on
9 038 348 9 027 941
PU: 400 PU: 50
KAT_037_050_G3_USA.qxd 01.02.2006 0:16 Uhr Seite 38
12,8
12,8
39
Intermat 9944Fast-assembly hingeOpening angle 125°
Concealed hinges, snap-on assembly, integrated door overlay and eccentric depth adjustmentOpening angle 125°, cup diameter 35 mmIntermat 9944 hinges are snapped on to the mounting plateDepth adjustment via eccentric screw -0,5 mm/-3,5 mm Height adjustment via mounting plate +2 mm/–2 mmOverlay adjustment +0,5 mm/-3 mm
Mounting plate distances (D):Face frame: 0 mm; 4,5 mmFrameless: 0 mm; 1,5 mm; 3 mm; 5 mm; 8 mm
H
T
65
125°
Door protrusion T for 0 mmdistance and 3 mm cupdistance
Side
Door
Face Frame FramelessCabinet construction
Minimum revealCup distance Door thickness mmC mm 16 17 18 19 203 1,3 1,6 1,9 2,3 2,84 1,3 1,6 1,9 2,3 2,74,5 1,2 1,5 1,8 2,2 2,65 1,2 1,5 1,8 2,1 2,6
D Overlay mm0 16 17 17,5 181,5 14,5 15,5 16 16,53 13 14 14,5 155 11 12 12,5 138 8 9 9,5 10
3 4 4,5 5
D Overlay mm1,5 5 6 6,5 7
3 4 4,5 5
D Reveal mm Side3 9 7 6 5 163 12 10 9 8 19
3 4 4,5 5
Cup distance C mm
Cup distance C mmCup distance C mm
Distance (D)
DoorReveal
Overlay
Side
Cup distance C
Cup distance C
Distance (D)Distance (D)
Overlay
DoorDoor
Reveal
Side
125°
Mounting H Toption mm mm
Full overlay 18,5 8Half overlay 28 17,5
Distance (D)
DoorOverlay
Side
Cup distance C
Cup distance C
Distance (D)
Overlay
Door
Side
12,8
12,8
Mounting plates page 57-60Cover caps, accessories page 61
For more technical information refer to page 32-36
PU 200
TB 42 (screw-on) 1 070 715TB 43 (press-in) 1 058 549TB FIX (toolless) 1 063 461
Full overlay Door buffer Silent System (grey)
clip-on screw-on drill-in
9 015 112 9 015 115 9 013 069
PU: 400 PU: 400 PU: 800
PU 200
TB 42 (screw-on) 9 046 809TB 43 (press-in) 1 058 550TB FIX (toolless) 1 063 463
Half overlay Door buffer Silent System (grey)
clip-on screw-on drill-in
9 038 342 9 015 115 9 013 069
PU: 400 PU: 400 PU: 800
KAT_037_050_G3_USA.qxd 01.02.2006 0:17 Uhr Seite 39
11,8
11,8
Distance (D)
DoorOverlay
Side
Cup distance C
Cup distance C
Distance (D)
OverlayDoor
Side
11,8
11,8
11,8
40
165°
H
T
66,5
Intermat 9956Fast-assembly hinge0 ProtrusionOpening angle 165°-120°
Concealed wide-angle hinge, snap-on assembly, integrated door overlay and eccentric depth adjustmentOpening angle 165° – the opening angle can be variably adjusted up to 120° with the adjustment screw (Order-no. 079 791)*. Cup diameter 35 mmThe wide-angle hinge enables an optimal reveal (hairline reveal)Negative door protrusionIntermat 9956 hinges are snapped on to the mounting plateDepth adjustment via eccentric screw -0,5 mm/+3,5 mmHeight adjustment via mounting plate +2 mm/-2 mmOverlay adjustment +0,5 mm/-3 mm
Mounting plate distances (D):Face frame: 0 mm; 4,5 mmFrameless: 0 mm; 1,5 mm; 3 mm; 5 mm; 8 mm
No door protrusion T for0 mm distanceand 3 mm cupdistance, unrestricted drawer runner movement.
Side
Door
Face Frame FramelessCabinet construction
D Overlay mm0 16 17 17,5 18 191,5 14,5 15,5 16 16,5 17,53 13 14 14,5 15 165 11 12 12,5 13 148 8 9 9,5 10 11
3 4 4,5 5 6
D Overlay mm1,5 5 6 6,5 7 8
3 4 4,5 5 6
D Reveal mm Side1,5 6 4 3 2 0 161,5 9 7 6 5 3 19
3 4 4,5 5 6
Cup distance C mm
D Reveal mm8 1,5 0,5 0
3 4 4,5
Cup distance C mm
Cup distance C mmCup distance C mm
120°-165°
Minimum revealCup distance Door thickness mmC mm 16 17 18 19 203 0 0 0 0 04 0 0 0 0 04,5 0 0 0 0 05 0 0 0 0 06 0 0 0 0 0
Distance (D)
DoorReveal
Overlay
Side
Cup distance C
Cup distance C
Distance (D)Distance (D)
Overlay
DoorDoor
Reveal
Side
Distance (D)
Side
Reveal Door
Cup distance C
Mounting H Toption mm mm
Full overlay 46 -1,5Half overlay 55,5 8
Mounting plates page 57-60Cover caps, accessories page 61
For more technical information refer to page 32-36
PU 100
TB 42 (screw-on) 1 076 819TB 43 (press-in) 1 073 385TB FIX (toolless) 1 073 376
Full overlay Door buffer Silent System (grey)
screw-on drill-in
9 015 115 9 013 069
PU: 400 PU: 800
PU 100
TB 42 (screw-on) 9 008 111TB 43 (press-in) 1 073 407TB FIX (toolless) 1 073 380
Half overlay Door buffer Silent System (grey)
screw-on drill-in
9 015 115 9 013 069
PU: 400 PU: 800
PU 100
TB 42 (screw-on) 9 008 111TB 43 (press-in) 1 073 407TB FIX (toolless) 1 073 380
Inset Door buffer Silent System (grey)
screw-on
9 027 941
PU: 50
KAT_037_050_G3_USA.qxd 02.02.2006 20:01 Uhr Seite 40
41
Mounting configurations Intermat 99560 Potrusion
Mounting configuration:Intermat 9956 full overlayMounting plate distance (D): 0 mm
Mounting configuration:Intermat 9956 full overlayMounting plate distance (D): 0 mmUse adjustment screw (Order no. 079 791) to restrict opening angle.
Thick door application
Mitered corner door application
Mounting configuration:Intermat 9956 half overlayMounting plate distance (D): 5 mmUse adjustment screw (Order no. 079 791) to restrict opening angle.
Mounting configuration:Intermat 9956 half overlayMounting plate distance (D): 3 mmUse adjustment screw (Order no. 079 791) to restrict opening angle.
Lip door application
Intermat 9956Fast-assembly hinge0 ProtrusionOpening angle 165°-120°
120°-165°
* Opening angle 165° – steplessadjustment of the opening angleup to 120° via the adjustmentscrew M5x14 mm.
Order no. PU
079 791 50
Adjustment screw M5 x14 mm
120°165 °
max. 7
45,5
37
90°
55,5
0,5
130°
45°
19
19
19
130°
46
0,810
10
12
130°
37
Y6
X
X 25 29 32 35 38Y 24 21,3 19,4 17,5 15,5
Door protusion -1,3
KAT_037_050_G3_USA.qxd 02.02.2006 20:02 Uhr Seite 41
11,3
11,3
11,3
95°
H
65
T
42
Intermat 9936Fast-assembly hinge for profile doors up to 32 mmOpening angle 95°
Concealed hinge, snap-on assembly, integrated door overlay and eccentric depth adjustmentOpening angle 95°, cup diameter 35 mmThe hinge enables an optimum reveal (hairline reveal) for profile doorsIntermat 9936 hinges are snapped on to the mounting plateDepth adjustment via eccentric screw -0,5 mm/+3,5 mm Height adjustment via mounting plate +2 mm/-2 mmOverlay adjustment +2 mm/-3 mm
Mounting plate distances (D):Face frame: 0 mm; 4,5 mmFrameless: 0 mm; 1,5 mm; 3 mm;
5 mm; 8 mm
Door protrusion T for 0 mmdistance and 3 mm cupdistance
Side
Door
Face Frame FramelessCabinet construction
D Overlay mm0 16 17 17,5 18 19 20 211,5 14,5 15,5 16 16,5 17,5 18,5 19,53 13 14 14,5 15 16 17 185 11 12 12,5 13 14 15 168 8 9 9,5 10 11 12 13
3 4 4,5 5 6 7 8
D Overlay mm1,5 5 6 6,5 7 8
3 4 4,5 5 6
D Reveal mm Side3 9 7 6 5 3 163 12 10 9 8 6 19
3 4 4,5 5 6
Cup distance C mm
D Reveal mm5 5 4 3,5 3 2
3 4 4,5 5 6
Cup distance C mm
Cup distance C mmCup distance C mm
Minimum revealCup distance Door thickness mmC mm 19 22 24 26 28 29 303 1,0 1,8 2,5 3,4 4,9 5,7 6,64 1,0 1,8 2,5 3,3 4,5 5,3 6,14,5 1,0 1,8 2,5 3,2 4,4 5,1 5,95 1,0 1,7 2,4 3,2 4,2 4,9 5,76 1,0 1,7 2,3 3,1 4,0 4,6 5,37 0,9 1,6 2,2 3,0 3,9 4,4 5,08 0,9 1,6 2,1 2,9 3,7 4,2 4,8
95°
Distance (D)
DoorReveal
Overlay
Side
Cup distance C
Cup distance C
Distance (D)Distance (D)
Overlay
DoorDoor
Reveal
Side
Distance (D)Side
RevealDoor
Cup distance CFor face frame application use half cranked hinge
11,3
Distance (D)
DoorOverlay
Side
Cup distance C
11,3
Distance (D)
DoorOverlay
Side
Cup distance C
11,3
Distance (D)
Door
Reveal
Side
Cup distance C
Mounting H Toption mm mm
Full overlay 18,5 10Half overlay 28 19,5Inset 34,5 26
Mounting plates page 57-60Cover caps, accessories page 61
For more technical information refer to page 32-36
PU 50
TB 43 (press-in) 073 915
Full overlay Door buffer Silent System (grey)
clip-on screw-on drill-in
9 015 112 9 015 115 9 013 069
PU: 400 PU: 400 PU: 800
PU 50
TB 43 (press-in) 073 919
Half overlay
PU 50
TB 43 (press-in) 073 923
Inset
Door buffer Silent System (grey)
clip-on screw-on drill-in
9 038 342 9 015 115 9 013 069
PU: 400 PU: 400 PU: 800
Door buffer Silent System (grey)
clip-on screw-on
9 038 343 9 027 941
PU: 400 PU: 50
KAT_037_050_G3_USA.qxd 01.02.2006 0:18 Uhr Seite 42
13,8
13,8
13,8
43
Mounting plate distances (D):Face frame: 0 mm; 4,5 mmFrameless: 0 mm; 1,5 mm; 3 mm;
5 mm; 8 mm
D Overlay mm0 21 22 22,5 23 24 25 261,5 19,5 20,5 21 21,5 22,5 23,5 24,53 18 19 19,5 20 21 22 235 16 17 17,5 18 19 20 218 13 14 14,5 15 16 17 18
3 4 4,5 5 6 7 8Cup distance C mm
95°
H
65
T
Intermat 9935Fast-assembly hingefor profile doors up to 43 mmOpening angle 95°
Door protrusion T for 0 mmdistance and 3 mm cupdistance
Side
Door
Face Frame FramelessCabinet construction
D Overlay mm1,5 9,5 10,5 11 11,5 12,5
3 4 4,5 5 6
D Reveal mm Side8 10 8 7 6 4 168 13 11 10 9 7 19
3 4 4,5 5 6
Cup distance C mm
D Reveal mm5 5 4 3,5 3 2
3 4 4,5 5 6
Cup distance C mmCup distance C mm
11,3
Distance (D)
DoorOverlay
Side
Cup distance C
11,3
Distance (D)
DoorOverlay
Side
Cup distance C
11,3
Distance (D)
Door
Reveal
Side
Cup distance C
Order no. PU
TB 22 / 40 (screw-on) 073 925 10
Full overlay
For face frame application use half cranked hinge
95°
Concealed hinges, snap-on assembly, integrated door overlay and eccentric depth adjustmentOpening angle 95°, cup diameter 40 mmThe hinge enables an optimum reveal (hairline reveal) for profile doorsIntermat 9935 hinges are snapped on to the mounting plateDepth adjustment via eccentric screw -0,5 mm/+3,5 mm Height adjustment via mounting plate +2 mm/-2 mmOverlay adjustment +0,5 mm/-3 mm
Minimum revealCup distance Door thickness mmC mm 33 34 35 36 37 39 41 433 3,2 4,1 4,9 5,8 6,8 8,8 10,7 12,64 2,9 3,4 3,9 4,5 5,6 7,8 10,0 11,94,5 2,9 3,4 3,9 4,3 5,4 7,5 9,7 11,65 2,8 3,2 3,6 4,1 5,1 7,2 9,3 11,26 2,8 3,2 3,6 3,9 4,8 6,7 8,7 10,67 2,7 3,0 3,4 3,7 4,5 6,2 8,0 9,98 2,6 2,9 3,2 3,5 4,2 5,6 7,3 9,1
Order no. PU
TB 22 / 40 (screw-on) 073 926 10
Half overlay
Order no. PU
TB 22 / 40 (screw-on) 073 927 10
Inset
Distance (D)
DoorReveal
Overlay
Side
Cup distance C
Cup distance C
Distance (D)Distance (D)
Overlay
DoorDoor
Reveal
Side
Distance (D)Side
RevealDoor
Cup distance C
Mounting H Toption mm mm
Full overlay 20 10,5Half overlay 30 20,5Inset 41 31,5
Mounting plates page 57-60Cover caps, accessories page 61
For more technical information refer to page 32-36
KAT_037_050_G3_USA.qxd 01.02.2006 0:18 Uhr Seite 43
20°
11,3
20°
11,3
44
Intermat 9936 W20Fast-assembly hingefor corner cabinetsOpening angle 95°
Concealed hinge, snap-on assembly, integrated door overlay and eccentric depth adjustmentOpening angle 95°, cup diameter 35 mmUsed for corner cupboards and cabinets with 20° face angleIntermat 9936 W20 hinges are snapped on to the mounting plateDepth adjustment via eccentric screw -0,5 mm/+3,5 mm Height adjustment via mounting plate +2 mm/–2 mmOverlay adjustment +2 mm/-3 mm
Mounting option
D Overlay mm0 10 11 11,5 12 13 14 151,5 8,4 9,4 9,9 10,4 11,4 12,4 13,43 6,8 7,8 8,3 8,8 9,8 10,8 11,88 1,5 2,5 3 3,5 4,5 5,5 6,5
3 4 4,5 5 6 7 8Cup distance C mm
W20
20°
95°
Minimum revealCup distance Door thickness mmC mm 16 17 18 19 20 22 243 0,4 0,6 0,8 1,0 1,2 1,8 2,54 0,4 0,6 0,8 1,0 1,2 1,8 2,54,5 0,4 0,6 0,8 1,0 1,2 1,8 2,55 0,4 0,6 0,8 1,0 1,2 1,7 2,46 0,4 0,6 0,8 1,0 1,2 1,7 2,37 0,4 0,5 0,7 0,9 1,1 1,6 2,28 0,4 0,5 0,7 0,9 1,1 1,6 2,1
D Reveal mm0 6 5 4,5 4 3 2 11,5 7,6 6,6 6,1 5,6 4,6 3,6 2,63 9,2 8,2 7,7 7,2 6,2 5,2 4,28 14,5 13,5 13 12,5 11,5 10,5 9,5
3 4 4,5 5 6 7 8Cup distance C mm
Overlay
Distance (D)
Cup distance C
Door
Side
Reveal
Distance (D)
Cup distance C
Door
Side
Mounting plates page 57-60Cover caps, accessories page 61
For more technical information refer to page 32-36
PU 50
TB 43 (press-in) 077 681
Full overlay Door buffer Silent System (grey)
screw-on drill-in
9 015 115 9 013 069
PU: 400 PU: 800
PU 50
TB 43 (press-in) 077 683
Inset Door buffer Silent System (grey)
screw-on
9 027 941
PU: 50
KAT_037_050_G3_USA.qxd 01.02.2006 0:19 Uhr Seite 44
9 9 3 6 W 2 0 K - 9
C = 3 ... 8 mm
20°
11,3
9 9 3 6 W 2 0 K 7
C = 3 ... 8 mm
20°
11,3
45
Note:Drawings on this page are to full scale and show the hinges plus mounting plate distances. By drawing in the required cup distance C (3-8 mm), the door overlay can be measured directly from the applicable distance line. The distance from the cabinet front edge to X on the selected distance line is also equal to the hole line distance from the cabinet front edge. For inset-mounted doors, the cup distance and door thickness must be taken into account when determining the minimum reveal.
SpecificationHettich Intermat 9936 W20Snap-on assemblyEccentric depth adjustmentfor 20° face angle applicationsOpening angle 95°
Inside cabinet wall for D 8 mm... for D 5 mm
... for D 3 mm... for D 1,5 mm
... for D 0 mm
Cabi
net
side
Cabi
net
side
Scale 1: 1
Cup distancerange C
Cup distancerange C
Inside cabinet wall for D 8 mm... for D 5 mm
... for D 3 mm
... for D 1,5 mm... for D 0 mm
Hole lineX Hole line
Full overlay* Overlay adjustment +2 mm / –3 mm
Inset* Reveal adjustment –2 mm / +3 mm
X
KAT_037_050_G3_USA.qxd 01.02.2006 0:19 Uhr Seite 45
30°
11,3
30°
11,3
46
Intermat 9936 W30Fast-assembly hingefor corner cabinetsOpening angle 95°
Concealed hinge, snap-on assembly, integrated door overlay and eccentric depth adjustmentOpening angle 95°, cup diameter 35 mmFor corner cupboards and cabinets with 30° face angleIntermat 9936 W30 hinges are snapped on to the mounting plateDepth adjustment via eccentric screw -0,5 mm/+3,5 mm Height adjustment via mounting plate +2 mm/–2 mmOverlay adjustment +2 mm/-3 mm
Mounting option
D Overlay mm0 10 11 11,5 12 13 14 151,5 8,3 9,3 9,8 10,3 11,3 12,3 13,33 6,6 7,6 8,1 8,6 9,6 10,6 11,68 0,8 1,8 2,3 2,8 3,8 4,8 5,8
3 4 4,5 5 6 7 8Cup distance C mm
Minimum revealCup distance Door thickness mmC mm 16 17 18 19 20 22 243 0,4 0,6 0,8 1,0 1,2 1,8 2,54 0,4 0,6 0,8 1,0 1,2 1,8 2,54,5 0,4 0,6 0,8 1,0 1,2 1,8 2,55 0,4 0,6 0,8 1,0 1,2 1,7 2,46 0,4 0,6 0,8 1,0 1,2 1,7 2,37 0,4 0,5 0,7 0,9 1,1 1,6 2,28 0,4 0,5 0,7 0,9 1,1 1,6 2,1
D Reveal mm0 7 6 5,5 5 4 3 21,5 8,7 7,7 7,2 6,7 5,7 4,7 3,73 10,4 9,4 8,9 8,4 7,4 6,4 5,48 16,2 15,2 14,7 14,2 13,2 12,2 11,2
3 4 4,5 5 6 7 8Cup distance C mm
W30
95°30°
95°
Overlay
Distance (D)
Cup distance C
Door
Side
Reveal
Distance (D)
Cup distance CDoor
Side
Mounting plates page 57-60Cover caps, accessories page 61
For more technical information refer to page 32-36
PU 50
TB 43 (press-in) 077 692
Full overlay Door buffer Silent System (grey)
screw-on drill-in
9 015 115 9 013 069
PU: 400 PU: 800
PU 50
TB 43 (press-in) 073 930
Inset Door buffer Silent System (grey)
screw-on
9 027 941
PU: 50
KAT_037_050_G3_USA.qxd 01.02.2006 0:19 Uhr Seite 46
9 9 3 6 W 3 0 K 7
C = 3 ... 8 mm
30°
11,3
9 9 3 6 W 3 0 K - 10
C = 3 ... 8 mm
30°
C = 3 ... 8 mm
11,3
47
Note:Drawings on this page are to full scale and show the hinges plus mounting plate distances. By drawing in the required cup distance C (3-8 mm), the door overlay can be measured directly from the applicable distance line.The distance from the cabinet front edge to X on the selected distance line is also equal to the hole line distance from the cabinet front edge. For inset-mounted doors, the cup distance and door thickness must be taken into account when determining the minimum door reveal.
SpecificationHettich Intermat 9936 W30Snap-on assemblyEccentric depth adjustmentfor 30° face angle applicationsOpening angle 95°
Scale 1: 1
... for D 5 mm... for D 3 mm... for D 1,5 mm... for D 0 mm
Hole line
... Inside cabinet wall for D 8 mm
Cabi
net
side
... for D 5 mm... for D 3 mm... for D 1,5 mm... for D 0 mm
Hole line
... Inside cabinet wall for D 8 mm
Cabi
net
side
Full overlay* Overlay adjustment +2 mm / –3 mm
Inset* Reveal adjustment –2 mm / +3 mm
Cup distancerange C
Cup distancerange C
X X
KAT_037_050_G3_USA.qxd 01.02.2006 0:19 Uhr Seite 47
PU 50
TB 43 (press-in) 077 701
Full overlay Door buffer Silent System (grey)
screw-on drill-in
9 015 115 9 013 069
PU: 400 PU: 800
PU 50
TB 43 (press-in) 048 098
Door buffer Silent System (grey)
screw-on drill-in
9 015 115 9 013 069
PU: 400 PU: 800
45°
11,3
45°
11,3
48
Intermat 9936 W45Fast-assembly hingefor corner cabinetsOpening angle 95°
Concealed hinge, snap-on assembly, integrated door overlay and eccentric depth adjustmentOpening angle 95°, cup diameter 35 mmFor corner cupboards and cabinets with 45° face angleIntermat 9936 W45 hinges are snapped on to the mounting plateDepth adjustment via eccentric screw -0,5 mm/+3,5 mm. Height adjustment via mounting plate +2 mm/–2 mmOverlay adjustment +2 mm/-3 mm
Mounting option
Minimum revealCup distance Door thickness mmC mm 16 17 18 19 20 22 243 0,4 0,6 0,8 1,0 1,2 1,8 2,54 0,4 0,6 0,8 1,0 1,2 1,8 2,54,5 0,4 0,6 0,8 1,0 1,2 1,8 2,55 0,4 0,6 0,8 1,0 1,2 1,7 2,46 0,4 0,6 0,8 1,0 1,2 1,7 2,37 0,4 0,5 0,7 0,9 1,1 1,6 2,28 0,4 0,5 0,7 0,9 1,1 1,6 2,1
D Overlay mm0 9 10 10,5 11 12 13 141,5 6,9 7,9 8,4 8,9 9,9 10,9 11,93 4,8 5,8 6,3 6,8 7,8 8,8 9,8
3 4 4,5 5 6 7 8Cup distance C mm
W45
45°95°
Distance (D)
Cupdistance C
Door
Side
Overlay
Overlay
Distance (D)
Cupdistance C
Door
Side
D Overlay mm0 5,5 6,5 7,0 7,5 8,5 9,5 10,51,5 6,9 7,9 5,0 5,5 6,5 7,5 8,53 4,8 5,8 3,0 3,5 4,5 5,5 6,5
3 4 4,5 5 6 7 8Cup distance C mm
45°
11,3
D Reveal mm0 14 13 12,5 12 11 10 91,5 16,1 15,1 14,6 14,1 13,1 12,1 11,13 18,2 17,2 16,7 16,2 15,2 14,2 13,28 25,3 24,3 23,8 23,3 22,3 21,3 20,3
3 4 4,5 5 6 7 8Cup distance C mm
Reveal
Distance (D)
Cupdistance C
Door
Side
Mounting plates page 57-60Cover caps, accessories page 61
For more technical information refer to page 32-36
Half overlay
PU 50
TB 43 (press-in) 073 934
Inset Door buffer Silent System (grey)
screw-on
9 027 941
PU: 50
KAT_037_050_G3_USA.qxd 01.02.2006 0:20 Uhr Seite 48
9 9 3 6 W 4 5 K 6
C = 3 ... 8 mm
45°
11,3
C = 3 ... 8 mm
45°
11,3
49
SpecificationHettich Intermat 9936 W45Snap-on assemblyEccentric depth adjustmentfor 45° face anglesOpening angle 95°
Note:Drawings on this page are to full scale and show the hinges plus mounting plate distances. By drawing in the required cup distance C (3-8 mm), the door overlay can be measured directly from the applicable distance line.The distance from the cabinet front edge to X on the selected distance line is also equal to the hole line distance from the cabinet front edge.For inset-mounted doors, the cup distance and door thickness must be taken into account when determining the minimum door reveal.
Half overlay, cranking 0 mm* Overlay adjustment +2 mm / –3 mm
Scale 1: 1
Hole line
... for D 5 mm
... for D 3 mm
... for D 1,5 mm
... for D 0 mm
... Inside cabinet wall for D 8 mm
Cabi
net
side
X
Cup distancerange C
Scale 1: 1
Hole line
... for D 5 mm... for D 3 mm
... for D 1,5 mm... for D 0 mm
... Inside cabinet wall for D 8 mm
Cabi
net
side
Full overlay, cranking 6 mm* Overlay adjustment +2 mm / –3 mm
Cup distancerange C
X
KAT_037_050_G3_USA.qxd 01.02.2006 0:21 Uhr Seite 49
9 9 3 6 W 4 5 K - 1 7
C = 3 ... 8 mm
45°
11,3
50
Intermat 9936 W45Fast-assembly hingefor corner cabinetsOpening angle 95°
W45
45°95°
Hole line
... for D 5 mm... for D 3 mm
... for D 1,5 mm... for D 0 mm
... Inside cabinet wall for D 8 mm
Cabi
net
side
Inset, cranking - 17 mm* Reveal adjustment –2 mm / +3 mm
X
Cup distancerange C
Note:Drawings on this page are to full scale and show the hinges plus mounting plate distances. By drawing in the required cup distance C (3-8 mm), the door overlay can be measured directly from the applicable distance line.The distance from the cabinet front edge to X on the selected distance line is also equal to the hole line distance from the cabinet front edge.For inset-mounted doors, the cup distance and door thickness must be taken into account when determining the minimum door reveal.
Scale 1: 1
KAT_037_050_G3_USA.qxd 01.02.2006 0:21 Uhr Seite 50
45°
11,3
19
1,5
19
51
Intermat 9936 W45Fast-assembly hingefor corner cabinetsOpening angle 95°
W45
45°95°
Mounting configuration Intermat 9936 W45
D Y Side Gap5 5 4 3,5 3 2 1 0
3 4 4,5 5 6 7 8Cup distance C mm
D Reveal mm5 6,5 5,5 5 4,5 3,5 2,5 1,5
3 4 4,5 5 6 7 8Cup distance C mm
IW = Installation widthDW = Door widthY = RevealDW = IW -(2 x Y)C = Cup distance
Mounting configuration:Intermat 9943 full overlayMounting plate distance (D) = 1,5 mm
Mounting configuration:Intermat 9936 W45 half overlayMounting plate distance (D) = 5 mm
DWY
Y
IWC
Distance (D)
Reveal
Cup d
istan
ce C
Reveal
KAT_051_066_G3_USA.qxd 01.02.2006 18:10 Uhr Seite 51
52
Intermat 9936 W90Fast-assembly hingefor blind corner cabinetsOpening angle 125°
Concealed hinge, snap-on assembly, integrateddoor overlay and eccentric reveal adjustmentOpening angle 95°, cup diameter 35 mmFor corner cabinets with blind panelsIntermat 9936 W90 hinges are snapped on to the mounting plateReveal adjustment via eccentric screw-0,5 mm/+3,5 mm Height adjustment via mounting plate +2 mm/-2 mmDoor protrusion adjustment +1,5 mm/-1,5 mm
Mounting plate distances (D):Frameless: 0 mm; 1,5 mm; 3 mm; 8 mm
D Reveal mm5 2,5 2 1,5 1
3 4 4,5 5Cup distance C mm
Minimum revealCup distance Door thickness mmC mm 16 18 19 20 22 243 0,4 0,8 1 1,2 1,8 2,54 0,4 0,8 1 1,2 1,8 2,54,5 0,4 0,8 1 1,2 1,8 2,55 0,4 0,8 1 1,2 1,7 2,46 0,4 0,8 1 1,2 1,7 2,37 0,4 0,7 0,9 1,1 1,6 2,28 0,4 0,7 0,9 1,1 1,6 2,1
W9090°
95°
28*
X
11,3
A
min. 62 mm 11,3
The hinges are adjusted correctly ex factory. The door protrusion can be adjusted if necessary. Turn screw (A) clockwise: The door protrusion can be adjusted by up to 3 mm (+1,5 mm/–1,5 mm).
Mounting example Calculating distance
Side
Door protrusion
Door
RevealCup distance C
Dist
ance
Distance = 5 mm - door protrusion
The back of the door and front panel will be flush if amounting plate with distance 5 mm is used.
Dist
ance
5 m
m
* The hole distance X, cup distance C and the revealmust always add up to 28!
Cup distance Reveal mmC mm 0 0,5 1,0 1,5 2,0 2,5 3,0
3 25,0 24,5 24,0 23,5 23,0 22,5 22,03,5 24,5 24,0 23,5 23,0 22,5 22,0 21,54 24,0 23,5 23,0 22,5 22,0 21,5 21,04,5 23,5 23,0 22,5 22,0 21,5 21,0 20,55 23,0 22,5 22,0 21,5 21,0 20,5 20,05,5 22,5 22,0 21,5 21,0 20,5 20,0 19,56 22,0 21,5 21,0 20,5 20,0 19,5 19,07 21,0 20,5 20,0 19,5 19,0 18,5 18,08 20,0 19,5 19,0 18,5 18,0 17,5 17,0
Calculating hole distance "X"
X + cup distance C + reveal = 28
Side
Door
Mounting plates page 57-60Cover caps, accessories page 61
For more technical information refer to page 32-36
PU 50
TB 43 (press-in) 077 710
Inset
Door buffer Silent System (grey)
screw-on drill-in
9 015 115 9 013 069
PU: 400 PU: 800
KAT_051_066_G3_USA.qxd 01.02.2006 18:11 Uhr Seite 52
53
Mounting plates page 57-60Cover caps, accessories page 61
For more technical information refer to page 32-36
9 9 4 4 W- 3 0
C = 3 ... 5,5 mm
-30°
12,8
60°
-30°12,8
Intermat 9944 W -30Fast-assembly hingefor negative face angleOpening angle 125°
Concealed hinge, snap-on assembly, integrated door overlay and eccentric depth adjustmentOpening angle 125°, cup diameter 35 mmFor corner cupboards and cabinets with -30° face angleIntermat 9944 W -30 hinges are snapped on to the mounting plateDepth adjustment via eccentric screw -0,5 mm/+3,5 mm Height adjustment via mounting plate +2 mm/–2 mmOverlay adjustment +1,5 mm/-1,5 mm.
Mounting option
D Overlay mm0 15 16 16,5 17 17,51,5 13,3 14,3 14,8 15,3 15,83 11,6 12,6 13,1 13,6 14,18 5,8 6,8 7,3 7,8 8,3
3 4 4,5 5 5,5Cup distance C mm
W-30
125°-30°
Minimum revealCup distance Door thickness mmC mm 16 17 18 19 20 22 243 1,3 1,6 1,9 2,3 2,8 3,9 5,34 1,3 1,6 1,9 2,3 2,7 3,7 54,5 1,2 1,5 1,8 2,2 2,6 3,6 4,95 1,2 1,5 1,8 2,1 2,6 3,5 4,85,5 1,2 1,5 1,8 2,1 2,5 3,4 4,6
Overlay
Distance (D)
Cup distance C
Door
Side
Note:Drawings on this page are to full scale and show the hinges plus mounting platedistances. By drawing in the required cup distance C (3-5,5 mm), the door overlay can be measured directly from the applicabledistance line.The distance from the cabinet front edge to X on the selected distance line is alsoequal to the hole line distance from thecabinet front edge.
Scale 1: 1
Hole line
... for D 5 mm... for D 3 mm
... for D 1,5 mm
... for D 0 mm
... Inside cabinet wall for D 8 mm
Cabi
net
side
Cup distancerange C
X
PU 50
TB 43 (press-in) 073 938
Full overlay
KAT_051_066_G3_USA.qxd 01.02.2006 18:11 Uhr Seite 53
54
Mounting plates page 57-60Cover caps, accessories page 61
For more technical information refer to page 32-36
Intermat 9944 W -45Fast-assembly hingefor negative face angleOpening angle 125°
Concealed hinge, snap-on assembly, integrated door overlay and eccentric depth adjustmentOpening angle 125°, cup diameter 35 mmFor corner cupboards and cabinets with -45° face angleIntermat 9944 W -45 hinges are snapped on to the mounting plateDepth adjustment via eccentric screw -0,5 mm/+3,5 mm Height adjustment via mounting plate +2 mm/–2 mmOverlay adjustment +1,5 mm/-1,5 mm
Minimum revealCup distance Door thickness mmC mm 16 17 18 19 20 22 243 1,3 1,6 1,9 2,3 2,8 3,9 5,34 1,3 1,6 1,9 2,3 2,7 3,7 54,5 1,2 1,5 1,8 2,2 2,6 3,6 4,95 1,2 1,5 1,8 2,1 2,6 3,5 4,85,5 1,2 1,5 1,8 2,1 2,5 3,4 4,6
W-45
125°-45°
45°
-45°12,8
Mounting option
D Overlay mm0 13 14 14,5 15 15,51,5 10,9 11,9 12,4 12,9 13,43 8,8 9,8 10,3 10,8 11,38 1,7 2,7 3,2 3,7 4,2
3 4 4,5 5 5,5Cup distance C mm
Distance (D)
Side
Cupdista
nce C
Door
Overlay
PU 50
TB 43 (press-in) 077 721
Full overlay
9 9 4 4 W- 4 5
-45°
C = 3
... 5,5
mm
12,8
Scale 1: 1
Hole line
... for D 5 mm... for D 3 mm
... for D 1,5 mm... for D 0 mm
... Inside cabinet wall for D 8 mm
Cabi
net
side
Cup distancerange C
XNote:Drawings on this page are to full scale and show the hinges plus mounting platedistances. By drawing in the required cup distance C (3-5,5 mm), the door overlay can be measured directly from the applicabledistance line.The distance from the cabinet front edge to X on the selected distance line is alsoequal to the hole line distance from thecabinet front edge.
KAT_051_066_G3_USA.qxd 01.02.2006 18:11 Uhr Seite 54
55
Intermat 9931Fast-assembly hingefor corner cabinet folding doorsOpening angle 50°/90°
Concealed hinge, snap-on assembly, integrated door overlay and eccentric depth adjustmentOpening angle 50°/90°, cup diameter 35 mmFor corner cabinets with folding doorsStandard Hettich cup holes are used for the door elementsCutaway or special holes are not requiredIntermat 9931 hinges are snapped on to the mounting plateDepth adjustment via eccentric screw -0,5 mm/+3,5 mmHeight adjustment via mounting plate +2 mm/–2 mm
Order no. PU
TB 43 (press-in) 045 038 50
90°50°
At the start of its swing, the door element opens about 50° on the handle side.This ensures that the whole corner cabinet door moves clear of any adjacent doors ordrawer fronts.In the open position, the two door elements form a straight line. The cabinet interior is fully accessible for user convenience.The self-closing feature eliminates the need for a catch on the handle side.
Features:� All cup holes in one door� Hairline reveal possible between door elements� No cutaway required in cup holes� Identical door width for both elements� Simple adaptation to door thickness by diagonal adjustment� Identical cup distance on both sides of attached door� Hole line distance in free door 37 mm
Features:� Identical door elements� No cutaway required in cup holes� Simple adaptation to door thickness by diagonal adjustment� Hole line distance in attached door 41 mm
Cabinet hinge, e.g. wide angle hinge
Adjustment
Depth adjustment
Side adjustment
Viewed"free" door
Hairline reveal
Reveal
Reveal
50°
90°
37*
Cabinet hinge, e.g. wide angle hinge
Diagonaladjustment
Depthadjustment
Sideadjustment
Viewed"free" door
Centre reveal5 mm
Reveal
Reveal
50°90°
5
41*
The diagonal adjustment can be used to adjust the hinges for different door thicknessesfrom 16 - 21 mm and different cup distances from 3 - 6 mm.
Calculating distance DExample:C distance 4,5 � D 0 C distance 3,0 � D 1,5
* 41/ *37 = mounting plateLR 37
Calculating distance DExample:C distance 4,5 � D 0 C distance 3,0 � D 1,5
Mounting plates page 57-60Cover caps, accessories page 61
For more technical information refer to page 32-36
KAT_051_066_G3_USA.qxd 01.02.2006 18:11 Uhr Seite 55
56
Intermat 9904 Fast-assembly hingefor glass doorsOpening angle 95°
Concealed glass door hinge, snap-on assembly, integrated door overlay and eccentric depth adjustmentOpening angle 95°, glass door hole diameter 26 mmFor glass doors with panel thickness of 4 - 6,5 mmFor a glass panel thickness from 5,5 mm, order 2 x cup fixing screws(order number 069 611, PU 1000)Intermat 9904 hinges are snapped on to the mounting plateDepth adjustment via eccentric screw -0,5 mm/+3,5 mm. Height adjustment via mounting plate +2 mm/–2 mmOverlay adjustment +0,5 mm/-3 mm.
Mounting option
D Overlay mm0 17,51,5 163 14,58 9,5
5,5Cup distance C mm
Order no. PU
T 1 072 960 50
Full overlay
95°
ø26Glass
D Overlay mm0 7,51,5 63 4,55 2,5
5,5Cup distance C mm
Order no. PU
T 1 072 967 50
Half overlay
D Reveal mm Side0 / 1,5 / 3 / 5 - / 4 / 7 / 11 16
4 / 7 / 10 / 14 195,5
Cup distance C mm
Order no. PU
T 1 072 968 50
Inset
D Reveal mm3 1,55 3,58 6,5
5,5Cup distance C mm
Distance (D)
Glass door
Reveal
Overlay
Side
Cup distance C
Cup distance C
Distance (D)Distance (D)
OverlayGlass door
Glass door
Reveal
Side
Distance (D)Side
Reveal Glass door
Cup distance C
high-gloss gold 040 340 50high-gloss chrome 040 341 50black 070 051 50matt nickel 070 712 50metallic brown 040 342 50
Finish Order no. PUhigh-gloss gold 040 494 50high-gloss chrome 040 495 50black 070 052 50matt nickel 070 713 50
Finish Order no. PU
Decorative cap A Decorative cap B
Mounting plates page 57-60Cover caps, accessories page 61
For more technical information refer to page 32-36
KAT_051_066_G3_USA.qxd 01.02.2006 18:11 Uhr Seite 56
57
MPL 9000
32
Mounting plate system 9000for Intermat and Ecomat hinges
Distance Total Order no.height
Face frame mounting plateHole distance 32 mm,for frame doors withoverlay, oblong holes for height adjustment±2 mmnickel-plateddie-cast zincPU = 200 pcs
0 mm 8,2 mm 1 076 5384,5 mm 12,7 mm 1 076 539
Fixing with countersunk wood screws ø 4 mm
Side
Frame
Door
40
Face frame mounting plateHole distance 40 mmEccentric height adjustment ±2 mm Mounting plate for overlay doorsnickel-plateddie-cast zincPU = 200 pcs
0 mm 8,2 mm 040 2214,5 mm 12,7 mm 040 222
Side
Frame
Door
Article
3215
Inset face frame mounting plateHole distance 32 mmEccentric height adjustment ±2 mmMounting plate for inset doorsnickel-plateddie-cast zincPU = 200 pcs
1,5 mm 9,7 mm 040 2233,0 mm 11,2 mm 040 2245,0 mm 12,7 mm 040 225
Side
Frame Door
KAT_051_066_G3_USA.qxd 01.02.2006 18:11 Uhr Seite 57
58
MPL 9000
3732
ø5
12
37
32
37
ø5
7,5
min15
32
Mounting plate system 9000for Intermat and Ecomat hinges
Distance Distance Total Order no.Hole line height
Patented screw-on wing mounting plates"Hettich Direkt"Half overlay applicationsfrom 15 mm side panelthickness possible,Hole distance 32 mm,with premounted locatingpegs and asymmetricallypositioned special screws for holes ø 5 x 7,5 mm, oblong holes for heightadjustment ±2 mm,nickel-plated steel/*die-cast zincPU = 400 pcs
37 mm 0 mm 9,0 mm 10716051,5 mm 10,5 mm 10716063,0 mm 12,0 mm 10716075,0 mm 14,0 mm 10716088,0 mm* 17,0 mm 1071609
Fixing with countersunk wood screws ø 4,5 mm
37 mm 0 mm 9,0 mm 1 071 6651,5 mm 10,5 mm 1 071 6663,0 mm 12,0 mm 1 071 6675,0 mm 14,0 mm 1 071 6688,0 mm * 17,0 mm 1 071 669
Screw-onwing mounting plateHole distance 32 mm,with premounted directfixing screws for holes ø 5 x 12 mm oblong holes for height adjustment ±2 mm,nickel-plated steel/*die-cast zincPU = 400 pcs
37 mm 0 mm 9,0 mm 1 071 6251,5 mm 10,5 mm 1 071 6263,0 mm 12,0 mm 1 071 6275,0 mm 14,0 mm 1 071 6288,0 mm* 17,0 mm 1 071 629
Screw-onwing mounting plateHole distance 32 mm,with oblong holes ø 5,4 mmfor height adjustment ±2 mm,nickel-plated steel/*die-cast zincPU = 400 pcs
Article
KAT_051_066_G3_USA.qxd 01.02.2006 18:11 Uhr Seite 58
59
15 37
37
32
12
min.15
37
32
12
min15
15 37
min.
Distance Distance Total Order no.Hole line height
Screw-on wing mounting plate"Hettich Top" for overlay mountingwith pre-mounted chipboard screwsEccentric height adjustment ±2 mm, nickel-plateddie-cast zincPU = 400 pcs
Screw-on wing mounting plate"Hettich Top"for half overlay mountingpossible from 15 mm side panel thicknesswith pre-mounted chipboard screwsEccentric height adjustment ±2 mm,nickel-plated die-cast zincPU = 400 pcs
37 mm 0 mm 8,3 mm 9 008 6831,5 mm 9,8 mm 9 008 6863,0 mm 11,3 mm 9 008 6875,0 mm 13,3 mm 9 008 6898,0 mm 14,3 mm 9 008 690
37 mm 0 mm 8,3 mm 9 040 3971,5 mm 9,8 mm 9 040 3983,0 mm 11,3 mm 9 039 8245,0 mm 13,3 mm 9 039 8258,0 mm 14,3 mm 9 039 826
Hole marking template for screw-on cross mounting plates with pre-mounted chipboardscrews for half overlay applications,Order no. 045 150, PU = 1 pc
37 mm 0 mm 8,3 mm 9 046 5961,5 mm 9,8 mm 9 046 3943,0 mm 11,3 mm 9 046 5975,0 mm 13,3 mm 9 046 6338,0 mm 14,3 mm 9 046 634
Mounting plate system 9000for Intermat and Ecomat hingeswith eccentric height adjustment
min.
Article
32
37
min.15
12
Screw-on wing mounting platewith prefixed 5 mm socketsfor overlay mountingHole distance 32 mm,with premounted fixing screws for holes ø 5 x 12 mmEccentric height adjustment ±2 mm,nickel-plated die-cast zincPU = 400 pcs
37
ø5
7,5
min15
32
Patented screw-on wing mounting plates"Hettich Direkt Top"Half overlay applications from 15 mm side panel thickness possibleHole distance 32 mm,with pre-mounted locating pegs and asymmetrically positioned special screws for drilling ø 5 x 7,5 mm, Eccentric height adjustment ±2 mm,nickel-plated die-cast zincPU = 400 pcs
37 mm 0 mm 8,3 mm 9 006 1391,5 mm 9,8 mm 9 006 1403,0 mm 11,3 mm 9 006 1415,0 mm 13,3 mm 9 006 1428,0 mm 14,3 mm 9 006 143
KAT_051_066_G3_USA.qxd 01.02.2006 18:16 Uhr Seite 59
60
Article
15°
MPL 9000
37
32
5° 10°
32
11,5
ø10
20
32
20
System 9000 mounting plates/angle mounting plates for Intermat and Ecomat hinges
Distance Distance Total Order no.Hole line height
Angle plates may only be used with the following wingmounting plates:
Screw-onwing mounting plateHole distance 32 mm, with oblong holes ø 5,4 mm for height adjustment ±2 mm, nickel-plated steel/*die-cast zincPU = 400 pcs
37 mm 0 mm 9,0 mm 1 071 6051,5 mm 10,5 mm 1 071 6063,0 mm 12,0 mm 1 071 6075,0 mm 14,0 mm 1 071 6088,0 mm* 17,0 mm 1 071 609
Fixing with countersunk wood screws ø 4,5 mm
Angle platefor wing mounting platesilver-grey plasticPU = 50 pcs
37 mm 5° 5,0 mm 079 34910° 10,0 mm 079 350
Simply turn the plastic angle mounting plates toeither increase or decrease the cabinet angle.Plastic angle mounting plates are stackable.
10°5°
InLine knock-in mounting platesHole distance 32 mmknock-in version for drill holes dia. 10 x 11,5 mmparallel eccentric height adjustment ±2 mm,nickel-plated steel die-cast zincPU = 50 pcs
20 mm 1,5 mm 9,5 mm 042 8143,0 mm 11,0 mm 042 8135,0 mm 13,0 mm 042 815
InLine screw-on mounting platesHole distance 32 mmfor direct fixing with chipboard screw ø 3,5 mm, parallel eccentric height adjustment ±2 mm,nickel-plated steel die-cast zincPU = 50 pcs
20 mm 1,5 mm 9,5 mm 043 0173,0 mm 11,0 mm 043 0185,0 mm 13,0 mm 043 019
3 5 10
3,0 mm
Distance spacer plate for wing mounting plateSilver-grey plasticPU = 50 pcs
37 mm 3,0 mm 3,0 mm 079 3235,0 mm 5,0 mm 079 324
10,0 mm 10,0 mm 079 325
Only suitable for use with screw-on wing mounting plates order no. 1 071 605 – 609 (see page 58)
5,0 mm
10,0 mm
KAT_051_066_G3_USA.qxd 01.02.2006 18:16 Uhr Seite 60
61
Cover capsAccessories
Cover cap for Intermat hinges
Cover cap for Ecomat hinges
Article Finish Order no. PU
Stop attachment white plastic 025 048 1000brown plastic 021 154 1000beige plastic 047 353 1000
Article Finish Order no. PU
Stop attachment, clear plastic 072 120 50self-adhesive clear plastic 046 695 1000
Article Finish Order no. PU
Cover cap for nickel-plated steel 013 300 50Intermat hinges black plastic 048 043 50
Article Finish Order no. PU
Cover cap for nickel-plated steel 079 790 50Ecomat hinges
Stop attachment, self-adhesiveø 8 mm
Stop attachmentfor hole diameter6 mm
ø8
1,5ø6,5
7
KAT_051_066_G3_USA.qxd 01.02.2006 18:16 Uhr Seite 61
62
KAT_051_066_G3_USA.qxd 01.02.2006 18:16 Uhr Seite 62
63
OptimatFace Frame Hinges
KAT_051_066_G3_USA.qxd 01.02.2006 18:16 Uhr Seite 63
64
Optimat 3E
The new Optimat 3E complements the
Optimat hinge family. The height, side,
and depth adjustment options via
the oblong opening bring big benefits.
doors can be adjusted easily and
quickly in six directions. Even after
years of use, the doors can be easily
adjusted. Solid wood doors warp over
time and a larger reveal is required.
The Optimat 3E makes this adjustment
simple, a definite bonus for the end
user.
The attractive features of the Optimat
3E include the small 10 mm cup depth
and the prospect of a minimum reveal
between the door and the frame.
The Optimat 3E is K.C.M.A. approved.
Hinge technology for face frame furniture of the highest order
Cup depth 10 mmK.C.M.A. approved
6-way adjustableface frame hinge
Overlay 1/2” and 11/4”,also 7/16” overlay (for back bevelled doors)
Small reveal between door and frame
Height adjustmentvia oblong opening
Side and depthadjustment via cam
Side adjustment Hight adjustment
± 1,5 mm + 2,4 / - 0,6 mm± 2,5 mm
Depth adjustment
KAT_051_066_G3_USA.qxd 01.02.2006 18:16 Uhr Seite 64
65
Opening angle: 110°Drilling diameter: 35 mmCup distance C: 2,5 mmCup depth: 10,0 mmDepth adjustment: +2,4 mm/-0,6 mmSide adjustment: +1,5 mm/-1,5 mmHeight adjustment: +2,5 mm/-2,5 mm
Optimat 3E6-way face frame hinge
45
ø 359,5
2,5
109,5
ø8
Face frame3/4”
Face frame3/4”
Side Side
1/2”
Side Side
Face frame3/4”
Face frame3/4”
Door
Door
11/4”
Door
Door
7/16"(1/2")
Side Side
Face frame3/4”
Face frame3/4”
Door
Door
Press-in T43/10
45
ø 359,5
2,5
10
Screw-on T42/10
Article T 42/10 – Order no. T 43/10 – Order no. PU
Optimat 3E – 6-way face frame hinge 9 046 669 9 040 499 200Overlay 1/2”
Article T 42/10 – Order no. T 43/10 – Order no. PU
Optimat 3E – 6-way face frame hinge 9 046 671 9 040 500 200Overlay 11/4”
Article T 42/10 – Order no. T 43/10 – Order no. PU
Optimat 3E – 6-way face frame hinge available on request 9 040 498 200Overlay 7/16”
KAT_051_066_G3_USA.qxd 01.02.2006 18:17 Uhr Seite 65
66
Face frame3/4”
Face frame3/4”
Side Side
1/2”
Side Side
Face frame3/4”
Face frame3/4”
Door
Door
11/4”
Door
Door
Article TB 42 – Order no. TB 43 – Order no. PU
Optimat 3 – One piece face frame hinge 1 076 811 1 076 814 200Overlay 1/2”
Article T 42/10 – Order no. T 43/10 – Order no. PU
Optimat 3 – One piece face frame hinge 1 076 812 1 076 815 200Overlay 11/4”
Opening angle: 110°Drilling diameter: 35 mmCup distance C: 2,5 mmCup depth: 10,0 mmHeight adjustment: +7,5 mm/-7,5 mm 45
ø 359,5
2,5
109,5
ø8
Press-in TB 43
45
ø 359,5
2,5
10
Screw-on TB 42
Optimat 3One piece face frame hinge
Just 1/8” Gap between frame and door
Height adjustment ± 7,5 mm
Solid steel construction
Cup depth just 10 mm
Sharp edged 3/4” doors possible
KAT_051_066_G3_USA.qxd 01.02.2006 18:17 Uhr Seite 66
6767
Selekta Pro 2000Fast assembly hinges for officeand commercial furniture
KAT_067_082_G3_USA.qxd 01.02.2006 0:33 Uhr Seite 67
Selekta Pro 2000
Perfect Functionattractive design
The program• opening angles 180° and 270°• with pre-mounted pan-head screws• with eccentric height adjustment ± 2 mm• with eccentric overlay adjustment -2 mm
68
Self-closing
Height adjustment
Third screw
Overlay adjustment
KAT_067_082_G3_USA.qxd 01.02.2006 0:35 Uhr Seite 68
Disassembly with a screw driver
Overlay adjustmentwith eccentric screw (-2 mm)
Height adjustmentwith eccentric screw (±2 mm)
Light finger pressure is enoughand the hinge is securely and
quickly mounted.
Fast-assembly hinge for office and commercial furniture
69
KAT_067_082_G3_USA.qxd 01.02.2006 0:35 Uhr Seite 69
70
270°
5,4
19
19
Selekta Pro 2000 Single pivot hinge with snap-on assemblyFor single cabinets, 19 mm sides/doorsOpening angle 270°, hole line 32 mm
For hole line 32 mm, spacing 37 mm
Single pivot hinge with visible knuckle, for cabinet construction and 19 mm sides/doors, precision die-cast zincOpening angle 270°, cup diameter 35 mm, door overlay 15 mm.Knuckle diameter 5,4 mm, knuckle length 39 mm.Separate mounting of cup and hinge arm.Hinge arm with pre-mounted pan-head screws.Fast-assembly of doors via snap-on attachment, without tools.High degree of protection against unintentional detachment: The lock canonly be released with a screwdriver.No door protrusion with 180° opening angle, free interior space for pull out elements.Overlay adjustment via eccentric screw -2 mm.Height adjustment + 2 mm/- 2 mm by means of eccentric screw in hinge arm.
Knuckle flush
Mounting optionHinge version
Corner hinge for single cabinet constructionDoor overlay 15 mmOpening angle 270°
Selekta Pro 2000Die-cast zincwith self-closing
Hinge arm (order cups separately, see page 71)
Fixing countersunk screw ø 3,5 x 16 mmfor cup TB 22
Finish Order no. PU
nickel-plated 071 925 200
Selekta Pro 2000hinge =Hinge arm + cup
For cup variants, see page 71
Finish Order no. PU
nickel-plated 9 022 299 200
KAT_067_082_G3_USA.qxd 01.02.2006 0:35 Uhr Seite 70
71
SpecificationHettich-Selekta Pro 2000 for cabinet construction and 19 mm sides/doorsSingle pivot hinge with snap-on assemblyOverlay and height adjustment via eccentric screwHinge arm with pre-mounted pan-head screwsHole line 32 mm, opening angle 270°, precision die-cast zinc
Overlay adjustmentTurn eccentric screw (A) to right, the overlaycan be reduced max. -2 mm.Eccentric height adjustment (± 2 mm)Turn eccentric screw (B) to right or left tolower or raise the door height.Then screw in the chipboard countersunkscrews (C) ø4 x 16 mm, order no. 010085, PU 200 pcs.
ø8x11
9,5
45
12,5
13
ø35
ø35
45
9,5
11
ø8
9,5
45
12,5
13
ø35
ø35
45
9,5
Mounting example Door adjustment
Insertion dies for drilling machine
Cover cap for Selekta Pro 2000
Cup TB 22 Cup TB 23Screw-on Press-inDie-cast zinc Die-cast zinc
13 deep
12,5
9,5
45
Finish Order no. PU
nickel-plated 1 083 439 200
Finish Order no. PU
nickel-plated 1 080 575 200
9,5
45
ø35
9,5
45
11
ø35ø8
ø35
13 deep
12,5
45ø8x11
ø35
9,5
Accessories
Finish Order no. PU
silver-grey plastic 010 067 50
Finish Order no. PU
nickel-plated 9 021 314 500
Hole dimension Order no. PU
TB 23 010 080 1
TB 22 hole dimensions TB 23 hole dimensions
Hinge arm fixing screwø 6,3 x 14 mmfor hole diamieter 5 mm
A
B
C
23,5
1,25,3
5,4
19
7,8
11
ø5
1913
37
max. 15
max. 2
Side
Door
Pre-mounted screw
Chipboard countersunk screw
Overlay adjustmentmax. -2 mm with eccentric screw
Overlay 15 mm
19
11
13
5,3
ø5
37
23,5
5,4
7,8
1,2
19
KAT_067_082_G3_USA.qxd 01.02.2006 0:35 Uhr Seite 71
72
7
19
19
Selekta Pro 2000 Single-pivot hinge with snap-on assembly for storagewall and single cabinet construction, 19 mm sides/doorsOpening angle 180°/230°, hole line 32 mm
For hole line 32 mm, spacing 37 mm
Single pivot hinge with visible knuckle, for storage wall and single cabinet construction, with 19 mm sides/door, precision die-cast zincOpening angle 180°/230°, cup diameter 35 mm, door overlay 11 or 5,5 mm.Knuckle diameter 7,0 mm, knuckle length 39 mm.Separate mounting of cup and hinge arm.Hinge arm with pre-mounted pan-head screws.Fast-assembly of doors via snap-on attachment, without tools.High degree of protection against unintentional detachment: The lock canonly be released with a screwdriver.No door protrusion at an opening angle of 180°or greater, leaving interior free for drawers.Overlay adjustment via eccentric screw -2 mm.Height adjustment + 2 mm/- 2 mm by means of eccentric screw in hinge arm.
Knuckle flush
Mounting optionHinge version
Corner hinge for single cabinet constructionDoor overlay 11 mmOpening angle 230°
Selekta Pro 2000Die-cast zincwith self-closing
Hinge arm (order cups separately, see page 73)
Fixing countersunk screw ø 3,5 x 16 mmfor cup TB 22
Finish Order no. PU
nickel-plated 071 925 200
Selekta Pro 2000hinge =Hinge arm + cup
For cup variants, see page 73
Finish Order no. PU
nickel-plated 9 037 906 200
180°/230°
KAT_067_082_G3_USA.qxd 01.02.2006 0:35 Uhr Seite 72
73
SpecificationHettich-Selekta Pro 2000 for storage wall and single cabinet construction with 19 mm sides/doorsSingle pivot hinge with snap-on assemblyOverlay and height adjustment via eccentric screwHinge arm with pre-mounted pan-head screwsHole line 32 mm, opening angle 180°/230°, precision die-cast zinc
Overlay adjustmentTurn eccentric screw (A) to right, the overlaycan be reduced max. -2 mm.
Eccentric height adjustment (± 2 mm)Turn eccentric screw (B) to right or left tolower or raise the door height.Then screw in the chipboard countersunkscrews (C) ø4 x 16 mm, order no. 010 085, PU 200 pcs.
A
B
C
ø8x11
9,5
45
12,5
13
ø35
ø35
45
9,5
11
ø8
9,5
45
12,5
13
ø35
ø35
45
9,5
Mounting example Door adjustment
Insertion dies for drilling machine
Cover cap for Selekta Pro 2000
Cup TB 22 Cup TB 23Screw-on Press-inDie-cast zinc Die-cast zinc
13 deep
12,5
9,5
45
Finish Order no. PU
nickel-plated 1 083 439 200
Finish Order no. PU
nickel-plated 1 080 575 200
9,5
45
ø35
9,5
45
11
ø35ø8
ø35
13 deep
12,5
45ø8x11
ø35
9,5
Accessories
Finish Order no. PU
silver-grey plastic 010 067 50
Finish Order no. PU
nickel-plated 9 021 314 500
Hole dimension Order no. PU
TB 23 010 080 1
TB 22 hole dimensions TB 23 hole dimensions
Hinge arm fixing screwø 6,3 x 14 mmfor hole diamieter 5 mm
21,2
1,25,3
7
19
7,8
11
ø5
1913
37
Auflage max. 11 mmAuflagenverstellung
Side
Door
Pre-mounted screw
Chipboard countersunk screw
Overlay adjustmentmax. -2 mm with eccentric screw
Overlay max. 11 mm
19
11
13
5,3
ø5
37
21,2
7
7,8
1,2
19
KAT_067_082_G3_USA.qxd 01.02.2006 0:36 Uhr Seite 73
74
180°
5,4
19
19
For hole line 32 mm
Single pivot hinge with visible knuckle for inset doors, for cabinet construction and 19 mm sides/doors, hole line 32 mmPrecision zinc diecastOpening angle 180°, cup diameter 35 mm.Knuckle diameter 5,4 mm, knuckle length 39 mm.Separate mounting of cup and hinge arm.Hinge arm with pre-mounted pan-head screws.Fast-assembly of doors via snap-on attachment, without tools.High degree of protection against unintentional detachment: The lock canonly be released with a screwdriver.No door protrusion with 180° opening angle, free interior space for pull out elements.Reveal adjustment via eccentric screw -2 mm.Height adjustment + 2 mm/- 2 mm by means of eccentric screw in hinge arm.
Inset
Mounting optionHinge version
Corner hinge for single cabinet constructionOpening angle 180°
Fixing countersunk screw ø 3,5 x 16 mmfor cup TB 22
Finish Order no. PU
nickel-plated 071 925 200
Selekta Pro 2000 Ehinge =Hinge arm + cup
Selekta Pro 2000 E Single-pivot hinge with snap-on assembly for inset doors single cabinets19 mm sides/doors, opening angle 180°
For cup variants, see page 75
Selekta Pro 2000Die-cast zincwith self-closing
Hinge arm (order cups separately, see page 75)
Finish Order no. PU
nickel-plated 9 037 251 200
KAT_067_082_G3_USA.qxd 01.02.2006 0:36 Uhr Seite 74
75
SpecificationHettich-Selekta Pro 2000 E for inset doors, cabinet construction with 19 mm sides/doorsSingle pivot hinge with snap-on assemblySide and height adjustment by means of eccentric screwHinge arm with pre-mounted pan-head screwsHole line 32 mm, opening angle 180°, precision die-cast zinc
Reveal adjustmentTurn eccentric screw (A) to right, to adjust the reveal by max. 2 mm.
Eccentric height adjustment (± 2 mm)Turn eccentric screw (B) to right or left tolower or raise the door height.Then screw in the chipboard countersunkscrews (C) ø4 x 16 mm, order no. 010 085, PU 200 pcs.
A
B
C
ø8x11
9,5
45
12,5
13
ø35
ø35
45
9,5
11
ø8
9,5
45
12,5
13
ø35
ø35
45
9,5
1,25,3
5,4
7,8
11
ø5
1913
37
min. 3,2max. 2
19 15,1
Mounting example Door adjustment
Cup TB 22 Cup TB 23Screw-on Press-inDie-cast zinc Die-cast zinc
13 deep
12,5
9,5
45
Side
Door
Pre-mounted screw
Chipboard countersunk screw
Reveal adjustment max. -2 mm with eccentric screw
min. reveal 3,2 mm
9,5
45
19 15,1
3711
13
5,3
ø5
7,8
1,2
19
ø35
9,5
45
11
ø35ø8
ø35
13 deep
12,5
45ø8x11
ø35
9,5
5,4
TB 22 hole dimensions TB 23 hole dimensions
Insertion dies for drilling machine
Cover cap for Selekta Pro 2000
Accessories
Finish Order no. PU
silver-grey plastic 010 067 50
Finish Order no. PU
nickel-plated 9 021 314 500
Hole dimension Order no. PU
TB 23 010 080 1
Hinge arm fixing screwø 6,3 x 14 mmfor hole diamieter 5 mm
Finish Order no. PU
nickel-plated 1 083 439 200
Finish Order no. PU
nickel-plated 1 080 575 200
KAT_067_082_G3_USA.qxd 01.02.2006 0:36 Uhr Seite 75
76
Flush hinge 101Screw-on version
Flush hinge 101Solid brass Drawn brass, drilled and milled,with fixed brass pinAdjustable in two dimensionsHeight: ± 1 mmDepth: ± 1,5 mm
with decorative finials ZK 18
Hinge length 50 mmMounting example
Side
Door
Side
Door
2 mm reveal
MASSIV
MESSING
SOLID
BRASS
SpecificationHettich flush hinge 101Screw-on version, adjustable in two dimensions,from drawn brass, drilled and milled,with fixed brass pin.
Article Finish Hinge length 50 mmwithout with decorativedecorative finials finials ZK 18
Order no. Order no. PU
Flush hinge 101 polished brass 1 079 676 1 065 784 200nickel-plated matt 1 065 876 1 065 786 200black 1 065 874 1 065 787 200polished chrome – 1 065 782 200high-gloss gold-plated – 1 076 914 200
2
ø7
40
20
4,5
1650ø2
3,5
14,5
5
2
KAT_067_082_G3_USA.qxd 01.02.2006 0:36 Uhr Seite 76
77
0 3 6 mm
5,5
52
12
5,5
35 52
5
22,5
Folding door hingewith offset pivotOpening angle 180°
Double cup hinge with adjustable offset pivotOpening angle 180°Pivot offset adjustment in stepsof 0 mm, 3 mm and 6 mm.The reveal is adjustable from hairline to +4 mm.The mounting is always flush.Identical hole pattern for both doors, hinge parts are mounted separately.Nickel-plated die-cast zinc
Mounting example
Pivot offset Door offset
0 mm 0 mm3 mm 6 mm6 mm 12 mm
Hole pattern screw on
Fixing countersunk screwø 3,5 x 16 mm, nickel-plated, for Cup T 42,order no. 071 925, PU 200
Door offset
Pivot offset
Pivot adjustmentReveal adjustment
Article Order no. PU
Folding door hinge 1 030 883 100
Example:For 3 mm reveal:
KAT_067_082_G3_USA.qxd 01.02.2006 0:37 Uhr Seite 77
78
5,5 73,5
20 34
100,5
91
56,5
max. 43,5
52
512
7
ø35
12,8
10
41
Fascia hinge with spring systemSuitable for mounting hinged fascias or for connecting two doorsections on folding/sliding doors.The integrated spring system keepsthe door closed in a 90° position and also keeps the fascia aligned with the door.The flat side arm takes up little space when the door is pushed intoposition between side panel and auxiliary panel.The hinge is ideal for the Panorama 95folding/sliding door fitting.Nickel-plated die-cast zinc
Article Finish Order no. PU
Fascia hinge nickel-plated 1 019 879 200die-cast zinc
Fascia hingewith spring system
Mounting example
Fascia
Panorama 95 with fascia hinge
Fascia hinge
� Fixing countersunk screw ø 3,5 x 16 mm, nickel-platedfor the hinge cup, order no. 071 925, PU 200
�
KAT_067_082_G3_USA.qxd 01.02.2006 0:37 Uhr Seite 78
79
Flap hingeMarkant 7.1
Mounting example
Article Finish left right PU
Flap hinge nickel-plated 1 083 936 1 083 935 50Markant 7.1
Flap hinge 7.1 for overlay flaps Separate installation of mounting plate and flap armCup hole 35 mmDepth adjustment + 2mm / -2 mmHeight adjustment + 2mm / -2 mm via mounting plateNickel-plated steel
Minimum door reveal allowed for each door (door mounting) to determine cup distance:
Cup distance A mmC mm
3 134 144,5 14,55 156 167 17
Cup distance Door thickness mmC* mm 16 18 20 22 24 26 28 30 32 34 36 38
3 0,4 0,8 1,2 1,8 2,4 3,2 4,3 5,9 7,7 9,6 11,5 13,34 0,4 0,8 1,2 1,8 2,4 3,2 4,2 5,6 7,2 9,1 10,9 12,74,5 0,4 0,8 1,2 1,8 2,4 3,2 4,2 5,6 7,2 9,1 10,9 12,75 0,4 0,7 1,1 1,6 2,3 3,1 4,0 5,2 6,7 8,5 10,2 12,06 0,4 0,7 1,1 1,6 2,3 3,0 3,8 4,9 6,2 7,9 9,5 11,37 0,4 0,6 1,0 1,5 2,1 2,9 3,6 4,6 5,7 7,3 8,8 10,6
Article Finish Order no. PU
Mounting plate nickel-plated 1 079 222 400for Markant 7.1
32
32
8 16
0,8
37
A
12
16
ø35
32,5
C*
25
7,5
14,5
AS
25 + AS = Hinge centre
Bottom
Side
Reveal
11,8
ø35
4820
27
KAT_067_082_G3_USA.qxd 02.02.2006 20:06 Uhr Seite 79
18
SF
TD
1mm
2mm
40
1mm
1mm
12
12
ø35
12,5
30
Flap
Bottom
FlapBottom
1 mm reveal
Hei
ght
adju
stm
ent
FlapBottom
Height adjustmentDepth adjustment
Side
adj
ustm
ent
80
Flap hingeMarkant 11
Hole patternMounting example
Article Finish Order no. PU
Flap hinge nickel-plated 9 046 480 100Markant 11 bronze 9 046 481 100
brass plated 9 046 482 100
Flap thickness TD Min. reveal SF
16 mm 1,0 mm17 mm 2,0 mm18 mm 3,0 mm19 mm 3,5 mm20 mm 4,5 mm
Reveal dimensions
Fasten with ø 3,0 x 15 mm or 3,0 x 13 mmcountersunk wood screws, head ø 6 mm
Flap hingeMarkant 11,Precision die-cast zincHinge parts are mounted separately in bottom panel and flap, enabling subsequent flap assembly. Flaps are aligned through independent height, side and depth adjustment.Identical hole dimensions in bottom panel and flap. Three screw fasteners ensure firm and exact hinge seating in bottom panel and flap.Hole edge break-out is hidden by covering lip. In open position, inside face edges of bottom panel and flap are flush before height adjustment.
KAT_067_082_G3_USA.qxd 01.02.2006 0:38 Uhr Seite 80
81
42,5
11
20
Y
L
30-45°
A
14
28
18,5
X
ø8
36
25
22
3
14,58,5
14
2
15
32 45
2
Klassik DFlap stay with L 258 D support
Klassik D Flap stay with L 258 D supportAll metalHigh-quality, maintenance-free braking system with fine adjustment. Guide bar, tie bar and base: nickel-plated steel Housing and support: nickel-plated die-cast zinc
Article Cabinet Order no. PUinternal height mm
Klassik D/300 300 - 350 016 173 10Klassik D/350 350 - 400 016 174 10Klassik D/400 400 - 450 016 175 10Klassik D/450 450 - 500 016 176 10Klassik D/500 500 - 550 016 177 10Klassik D/550 550 - 600 016 178 10
Order numbers refer to left-hand versions. Use left or right by repositioning the base.
Fasten with ø 3,5 DIN95 / DIN97 wood screws
Y can be made slightly bigger or smaller, A then changes correspondingly.
Article Cabinet Dimensions mminternal height mm X Y A L
Klassik D/300 300 - 350 182 100 88 153Klassik D/350 350 - 400 224 112 119 183Klassik D/400 400 - 450 252 126 134 203Klassik D/450 450 - 500 272 138 150 223Klassik D/500 500 - 550 322 175 184 273Klassik D/550 550 - 600 372 168 204 283
Assembly notes L 258 D support
A 3 base
Brake forceadjustment
Important: the angle betweenthe tie bar and the open flapmust be 30 - 45°!
The brake housing must rest onthe lower support when the flapis open.
Markant
KAT_067_082_G3_USA.qxd 01.02.2006 0:38 Uhr Seite 81
82
75°
26,5
32
49
41
16
32
32
28
Lift junior 90/140Top box flap support90 N / 140 N spring forceOpening angle 75°
Article Order no. PU
Lift junior 90 left 1 001 144 50Lift junior 90 right 1 001 145 50Lift junior 140 left 1 001 142 50Lift junior 140 right 1 001 143 50
Top box flap support available only as a set consisting of a left-hand and right-hand fitting.
Mounting example
Diagrams valid for90 N / 140 N versions
The closed flap is flush with thetop panel for the dimensionsgiven in the diagram.
Lift junior 90/140 top box flap supportin slender design90 N / 140 N spring force, 75° opening angleThe slender and compact top box hinge which takes up minimum space inside the cabinet.Efficient hole line assembly.Max. flap weightLift junior 90: 2 kgLift junior 140: 2,5 kgNickel-plated steel
KAT_067_082_G3_USA.qxd 01.02.2006 0:38 Uhr Seite 82
InnoTechdrawer system
83
KAT_083_095_G5_USA.qxd 01.02.2006 0:44 Uhr Seite 83
84
User-friendlyand utterlystylish
The high-quality powder-coatedfinish is easy to keep clean, givesyou excellent scratch resistanceand prevents unsightly fingerprints.
Uniquely different – sleek designand fine materials
The outside of the drawer profile is classically straight, the smoothlycurved inside is pleasant to touchand good to look at.
Steel drawers make sense. They look good and keep theirshape – and value – throughouttheir long life.
Silent System – sounds great!
Slamming drawers push up kitchennoise levels. Silent System techno-logy does the opposite. By makingsure drawers close with barely awhisper, it helps reduce noise andstress levels in the kitchen.
KAT_083_095_G5_USA.qxd 02.02.2006 20:05 Uhr Seite 84
85
Suits every taste – TopSide variants
InnoTech’s distinctive design is continued in the TopSides.
TopSides made of translucent plasticcreate a feeling of light and lightness.
For greater individuality, special Top-Side versions made of glass or other premium materials can be clipped on using universal adapters.
It takes only seconds to clip TopSidesbetween profiles and railings.
Requiring minimal extra logistics effort,TopSides offer huge differentiationoptions to manufacturers and kitchenstudios alike.
Efficiency boost in the kitchen with well-designed organizers
InnoTech adjustable organizer components let users plan their storage space to suit their needs.
InnoTech organizers make it easy to keep drawer contents tidy and secure – cutlery, cooking implements,plates, groceries or odds and ends. Always ready to hand!
KAT_083_095_G5_USA.qxd 01.02.2006 0:46 Uhr Seite 85
86
Plastic cutlery insert
This insert offersconvenient storagespace for cutlery, kitchen implements,or odds and ends. The tough surface isattractive and easyto clean.
KAT_083_095_G5_USA.qxd 01.02.2006 0:46 Uhr Seite 86
87
Space perfectlyorganized
Universal organizer for pan drawers
Organize your groceries theway you want them. InnoTechorganizers adapt to anybody‘swork style. The universal organizer is infinitely variable,both lengthwise and crosswise.
Side rack plus jars for pan drawers
Store loose groceries in two rowsof jars on either side of the drawer.There’s no risk of jars tipping overor spilling. And there’s space forpackaged foods in the middle.
Universal organizer with aluminium profiles for pan drawers
Just the ticket for stackingand storing plates safely. The high-quality aluminiumframe holds everythingsecurely in place. Adjustabledividers accommodate different-sized plates.
KAT_083_095_G5_USA.qxd 01.02.2006 0:46 Uhr Seite 87
88
Always ahead on ideas –InnoTech’s intelligentsolutions
Eye-catching and attractive: decor panels for inside drawers
Attractive front and side panels forinside drawers and pan drawers addto design and differentiation options.Use them behind glass doors or insemiopen units without front panels.
Make the most of undersink space
The removeable OrgaFlex bins hook onto, and slide along behind,the actual drawer back panel. The ingenious solution utilizes otherwise wasted space under thesink. The easy-to-clean bins can bearranged to suit individual needs.
Exclusive stainless steel
For the ultimate look & feel in quality,nothing beats stainless steel InnoTech drawers. These luxury drawers aremounted on the same Quadro runnersas other InnoTech elements.
KAT_083_095_G5_USA.qxd 01.02.2006 0:47 Uhr Seite 88
89
Intelligent kitchensEfficiency is king when kitchen layout and storage are planned alongfunctional lines. These are the fiveareas that matter:
• Food storage
• Food preparation
• Pots and pans
• Cleaning agents and waste
• Crockery and cutlery
Food storage
Food preparation
Pots and pans Cleaning agents and waste Crockery and cutlery
Our Intelligent Kitchens conceptoffers you ideas on kitchen layoutand on choosing and optimizingstorage units for the highest levelof user comfort. Smooth workflowsmake kitchen work more enjoyableby minimizing time and effort.
Then go one better and fit yourstorage units with InnoTech drawers and organizer systems.Their outstanding design teams
quick and easy access with intelligent functionality.
www.intelligent-kitchens.com
KAT_083_095_G5_USA.qxd 01.02.2006 0:50 Uhr Seite 89
90
Silent System –sounds great!
KAT_083_095_G5_USA.qxd 01.02.2006 0:50 Uhr Seite 90
91
How Silent System closes drawerssoftly and soundlessly
Noise levels in the kitchen shoot upwhen drawers are slammed shut.Drawer contents rattle. Contents getshaken up. Things clatter, nerves jangle.
InnoTech drawers with Silent Systembanish this type of disturbance from
the kitchen. They help to create arelaxed mood and a more efficientworking environment.
Silent System closes all drawers gentlyand softly – from lightly laden cutlerydrawers to heavily laden pan drawers.
Quadro runners with integrated Silent System save kitchen manufac-turers extra production steps.
Silent System is completely invisible,completely effective and very impressive.
KAT_083_095_G5_USA.qxd 01.02.2006 0:51 Uhr Seite 91
92
Running true to form –InnoTech and Quadro
KAT_083_095_G5_USA.qxd 01.02.2006 0:52 Uhr Seite 92
93
On the go all the time
Some drawers, like the cutlery drawer,are opened and closed time and again.Wide pan drawers with lots of storagespace tend to be loaded to the brim.InnoTech and Quadro have shownthemselves the ideal team for thisheavy use. Even drawers loaded withstacks of plates will open and shuteffortlessly on Quadro runners.
Extremely strong and durable
A grand total of 180 precision steel balls roll in up to eight tracks, depending on the model.Even continuous loading does notalter their perfectly round shape.The special track profiles and steelballs form a unit that distributesforces evenly in all directions. The result is high stability both vertically and horizontally.
Superb runner action and no let up
The Quadro’s self-cleaningmechanism ensures that dirt particles are simply swept asideby the steel balls as they traversealong the track. The silky smoothaction is there to stay.
KAT_083_095_G5_USA.qxd 01.02.2006 0:52 Uhr Seite 93
94
Toolless assembly andon-site adjustment
Uncomplicated frontpanel replacement
A blue press button makesit easy to swap frontpanels. A kitchen user canreplace a damaged frontpanel in a matter of minutes. There‘s no needfor small problems tocause big costs.
Fast and precise front paneladjustment
A handy thumbwheel takescare of height adjustment to±2 mm – it’s highly practical,precise and needs no tools.And it’s thumbs up for thethumbwheel if a narrow gapbetween the drawer and a wall makes it impossible to use a screwdriver. Front paneladjustment by ±1.5 mm isequally unproblematic andrequired on one side only.
Simple front panel angleadjustment
For an immaculate appearanceit may be necessary to adjustthe angle of the pan drawerfront panel. It couldn’t be simpler: a twist of the railingis all that is required. Again no tools are needed.
Fast and easy drawerinsertion and removal
A drawer is inserted bysimply locating it on therunners and pushing it in.Two catches automaticallylock the drawer in place,preventing accidentalremoval.
To remove the drawer, thecatches are pressed inwardallowing the drawer to bepulled forward and liftedoff the runners.
KAT_083_095_G5_USA.qxd 01.02.2006 0:55 Uhr Seite 94
95
More benefits for thekitchen manufacturer
• Toolless assembly and disassembly of front panels and railings: speeds up production.
• Cut to size width back panelsfrom 2 m long aluminiumstock: a coherent design even for custom drawerwidths.
Faster production and lower manufacturing costs
• No machining of drawerbottom panels required.
• Drawer profiles speciallypackaged for faster removal.
Competitive advantage through differentiation
• One drawer, three interchangeable runnersystems: partial, full extension, and full extension with Silent System.
• Powder-coated steel orstainless steel for morechoice and individuality.
• Choice of TopSides forstyle and individuality.
• Different organizersystems and intelligentsolutions for optimal use of available storagespace.
• Quadro runner with integrated Silent System:eliminates extra processing steps.
• InnoFit jigs for efficientproduction: short set-uptimes, aluminium and steelback panels processed onone machine, support forworkplace layout fromHettich.
• Runners packaged and precisely alignedin special boxes: forautomatic extractionand placing by handling devices.
KAT_083_095_G5_USA.qxd 01.02.2006 0:55 Uhr Seite 95
96
InnoTech DrawerSteel profile system for variable drawer widths
System benefits
• Variable drawer widths• 5 nominal drawer lengths: 260/350/420/470/520 mm• Surface finish: silver• Quick insertion and removal of the drawer• No bottom panel machining• Toolless assembly/disassembly and convenient
front panel adjustment• Perfect drawer action with
QUADRO full extension runner
� InnoTech drawer profile� Front connector� Cover cap� Back panel connector for
cut to size back panels� Cut to size length back panel
�
�
�
�
�
�
�
�
�
�
InnoTech drawer profiles,inside height 70 mm / (2 3/4")powder-coated steelwith silver finishor stainless steel
Article Length Order no. PUmm / inch left right
InnoTech 260 / (10 1/4“) 9 015 781 9 015 782 18drawer profiles, 350 / (13 3/4“) 9 019 693 9 019 694 18powder-coated steel 420 / (16 1/2“) 9 015 786 9 015 787 18
470 / (18 1/2“) 9 015 793 9 015 794 18520 / (20 1/2“) 9 015 811 9 015 812 18
InnoTech 260 / (10 1/4“) 9 048 187 9 048 188 18drawer profiles, 350 / (13 3/4“) 9 048 204 9 048 205 18stainless steel 420 / (16 1/2“) 9 048 208 9 048 209 18
470 / (18 1/2“) 9 048 210 9 048 211 18520 / (20 1/2“) 9 048 213 9 048 214 18
Knock-in front connector with expanding dowel and premounted screwHole diameter 10 mm / (3/8"),knock-in assembly,hole depth 12,5 mm / (1/2")
Article Order no. PU
Knock-in front connector 1 061 450 400
Cover capplastic, with optional printingFinish: grey
Article Order no. PU
Cover cap 1 061 448 400
Back panel connectors for alumimiumback panel or 16 mm / (5/8") wooden back panel
Article Finish Order no. PUleft right
Back panel powder-coated silver 1 062 501 1 062 502 40connectors nickel-plated 9 054 503 9 054 504 40
Back panel connectors fixed with ø 3,5 mm / (#6) pan-head screws,length 12 mm (1/2")
Cut to size length back panels2000 mm / (78 3/4")powder-coated aluminiumFinish: silver
Article Order no. PU
Cut to size length back panels 1 063 674 10
Corner connectors fixed with ø 3,5 mm / (#6) pan-head screws, length 20 mm (25/32")Back panels for standard European measurements available on request
KAT_096_110_G5_USA.qxd 02.02.2006 20:04 Uhr Seite 96
97
Nominal Minimum QUADRO V6 QUADRO V6 Silent System QUADRO V6+ Silent Systemlength cabinet full-extension runner full-extension runner full-extension runner
depth Load capacity Load capacity Load capacitymax. 66 lbs (30 kg) max. 66 lbs (30 kg) max. 110 lbs (50 kg)
mm / inch mm left right PU left right PU left right PU
260 / (10 1/4“) 279 / (11“) 1 042 914 1 042 915 32 9 047 180 9 047 181 20 - - -350 / (13 3/4“) 365 / (14 3/8“) 1 043 054 1 043 055 32 9 046 304 9 046 305 20 - - -420 / (16 1/2“) 435 / (17 1/8“) 1 040 680 1 040 681 32 9 046 294 9 046 295 20 9 040 153 9 040 154 16470 / (18 1/2“) 485 / (19 1/8“) 1 039 999 1 040 000 32 9 046 288 9 046 289 20 9 039 738* 9 039 741* 16520 / (20 1/2“) 535 / (21 1/16“) 1 043 199 1 043 200 32 9 047 171 9 047 172 20 9 040 166 9 040 167 16
Toolless heightadjustment
Dimensions
Drawer front panel
Wooden/Aluminium back panel =Inside cabinet width - 88 (3 7/16“)
Inside cabinet width
Bottom panel depth foraluminium back panel =nominal length –3 (1/8“)Bottom panel depth forwooden back panel =nominal length +10* (3/8“)* for flush bottom and
back panels!
Wooden back panel assembly
± 2 mm
Bottom panel width = inside cabinet width
- 75,5 (3“)
Wooden back panel =65,5 (2 9/16“)
Back panel connectors
Panhead screwø 3,5 x 12
Side adjustment onright-hand drawerprofile only
± 1,5 mm
9,5
42
104102
16
7032
37
9799 9,5
14
(37/8") (313/16")
(11/2")
(3/8")
(9/16")
(11/4")(23/4")
(41/8")(3/8") (4")
(111/16")(5/8")
22,5(7/8")
(1/2")12,5 (1/2")12,5
InnoTech with Quadro V6+ full extension runner
InnoTech with Quadro V6 full extension runner
Centre distance front panel connectors = inside cabinet width - 45 (1 3/4“)
Usable inside width = inside cabinet width - 71 (2 13/16“)
Inside cabinet width
min.min.
37
12,5 (1/2”)
ø10±0,1(3/8”)
Cabinet front edge
Nominal length (see table below)
Usable inside length = nominal length - 7,7 (5/16“)
Minimum cabinet depth (see table below)
Toolless assembly
Toolless disassembly
Cabinet width
Assembly
* Minimum cabinet depth: 496 mm / (19 5/8“)
All Inch fraction numbersare approximated values.Please use metric measuresfor accurate construction.
KAT_096_110_G5_USA.qxd 01.02.2006 18:21 Uhr Seite 97
98
InnoTech pot-and-pan drawerSteel profile system for variable pot-and-pan drawer widths
� / � / � see page 96� TopSide for pan drawer 144 mm, optional� Lengthwise railing� Front connector for railing� Back panel connector for cut to size back panel Cut to size length back panel
�
�
�
�
�
�TopSide for pot-and-pan drawer 144 mm / (5 11/16"), optionaltranslucent plastic
Article Nom. length Order no. PUmm / inch
TopSide for 260 / (10 1/4“) 9 009 923 40 setspan drawer 350 / (13 3/4“) 9 009 924 50 sets
420 / (16 1/2“) 9 008 752 100 sets470 / (18 1/2“) 9 008 753 100 sets520 / (20 1/2“) 9 008 754 100 sets
Universal TopSide adaptereg, for glass plates 4 mm / (3/16") thick and 59,5 mm / (2 5/16“) highgrey plastic
Article Order no. PU
Universal TopSide adapter 9 040 007 100 sets
Lengthwise railingAll connectors are premounted, right and left identical
Knock-in front connectors for railingPremounted screw, hole diameter 10 mm / (7/16"), hole depth 12,5 mm / (1/2")self-coloured plastic
� Back panel connectors for alumimium back panel or 16 mm / (5/8") wooden back panel
�
�
�
�
System benefits
• Variable pot-and-pan drawer widths• 5 nominal drawer lengths: 350/420/470/520/620 mm• Surface finish: silver• Quick insertion and removal of the drawer• No bottom panel machining• Toolless assembly/disassembly and convenient
front panel adjustment• Simple assembly of lengthwise railings• Perfect drawer action with
QUADRO full extension runner
Article Length Order no. PUmm / inch silver stainless steel
Lengthwise 260 / (10 1/4“) 1 068 510 9 048 930 80 railing 350 / (13 3/4“) 1 070 630 9 050 448 80
420 / (16 1/2“) 1 063 675 9 048 931 80 470 / (18 1/2“) 1 062 394 9 048 936 80 520 / (20 1/2“) 1 063 677 9 048 937 80
Article Order no. PU
Knock-in front connectors for railing 1 061 965 400
Back panel connectors fixed with ø 3,5 mm / (#6) pan-head screws,length 12 mm (1/2")
Cut to size length 144 mm / (5 11/16")back panels 2000 mm / (78 3/4")powder-coated aluminium Finish: silver
Article Order no. PU
Cut to size length back panels 9 004 195 10
Corner connectors fixed with ø 3,5 mm / (#6) pan-head screws, length 20 mm (25/32")
Article Finish Order no. PUleft right
Back panel powder-coated silver 9 007 355 9 007 356 40connectors nickel-plated 9 054 507 9 054 508 40
KAT_096_110_G5_USA.qxd 03.02.2006 13:05 Uhr Seite 98
99
Nominal Minimum QUADRO V6 QUADRO V6 Silent System QUADRO V6+ Silent Systemlength cabinet full-extension runner full-extension runner full-extension runner
depth Load capacity Load capacity Load capacitymax. 66 lbs (30 kg) max. 66 lbs (30 kg) max. 110 lbs (50 kg)
mm / inch mm left right PU left right PU left right PU
260 / (10 1/4“) 279 / (11“) 1 042 914 1 042 915 32 9 047 180 9 047 181 20 - - -350 / (13 3/4“) 365 / (14 3/8“) 1 043 054 1 043 055 32 9 046 304 9 046 305 20 - - -420 / (16 1/2“) 435 / (17 1/8“) 1 040 680 1 040 681 32 9 046 294 9 046 295 20 9 040 153 9 040 154 16470 / (18 1/2“) 485 / (19 1/8“) 1 039 999 1 040 000 32 9 046 288 9 046 289 20 9 039 738* 9 039 741* 16520 / (20 1/2“) 535 / (21 1/16“) 1 043 199 1 043 200 32 9 047 171 9 047 172 20 9 040 166 9 040 167 16
96
70
144
32
14
179 177
3716
184(71/4")
182(71/16")
(9/16")
(11/4") (2 3/4")
(5/8")
9,5
42
(3/8")9,5
(3/8")
(6 15/16") (73/16")
(511/16")
(3 25/32")
(11/2")
(1/2")12,5
(111/16")
(1/2")12,5
22,5(7/8")
InnoTech with Quadro V6+ full extension runner
InnoTech with Quadro V6 full extension runner
Centre distance front panel connectors = inside cabinet width - 45 (1 3/4“)
Usable inside width = inside cabinet width - 71 (2 13/16“)
Inside cabinet width
min.min.
Cabinet width
12,5 (1/2”)
ø10±0,1(3/8”)
Cabinet front edge
Nominal length (see table below)
Usable inside length = nominal length - 7,7 (5/16“)
Minimum cabinet depth (see table below)
Dimensions
Inside cabinet width
Front panel adjustment/disassembly see page 97
Aluminium/wooden back panel =inside cabinet width - 88 (3 7/16“)
Wooden back panel =144 (5 11/16“)
Bottom panel depth foraluminium back panel =nominal length – 3 (1/8“)Bottom panel depth forwooden back panel =nominal length +10* (3/8“)* for flush bottom and
back panels!
Wooden back panel assembly
Back panel connectors
Panhead screwø 3,5 x 12
Front panel
Lengthwise railing
Tiltadjustment
AssemblyBottom panel width = ´
inside cabinet width- 75,5 (3“)
* Minimum cabinet depth: 496 mm / (19 5/8“)
All Inch fraction numbersare approximated values.Please use metric measuresfor accurate construction.
KAT_096_110_G5_USA.qxd 01.02.2006 18:22 Uhr Seite 99
100
InnoTech Internal drawerSteel profile system for variable internal drawer widths
� InnoTech drawer profile� Cover cap � Back panel connector for cut to size back panels� Cut to size back panel for non-standard widths� Cut to size front panel� Corner connector for cut to size front panel
System benefits
• Variable internal drawer widths• 5 nominal drawer lengths: 260/350/420/470/520 mm• Surface finish: silver• Quick insertion and removal of the drawer• No bottom panel machining• Toolless assembly/disassembly and convenient
front panel adjustment• Can be combined with the cutlery trays – see pages 104• Perfect drawer action with
QUADRO full extension runner
�
�
�
�
�
�
� InnoTech drawer profiles,inside height 70 mm / (2 3/4")powder-coated steelwith silver finishor stainless steel
Article Length Order no. PUmm / inch left right
InnoTech 260 / (10 1/4“) 9 015 781 9 015 782 18drawer profiles, 350 / (13 3/4“) 9 019 693 9 019 694 18powder-coated steel 420 / (16 1/2“) 9 015 786 9 015 787 18
470 / (18 1/2“) 9 015 793 9 015 794 18520 / (20 1/2“) 9 015 811 9 015 812 18
InnoTech 260 / (10 1/4“) 9 048 187 9 048 188 18drawer profiles, 350 / (13 3/4“) 9 048 204 9 048 205 18stainless steel 420 / (16 1/2“) 9 048 208 9 048 209 18
470 / (18 1/2“) 9 048 210 9 048 211 18520 / (20 1/2“) 9 048 213 9 048 214 18
� Cover capplastic, with optional printingFinish: grey
Article Order no. PU
Cover cap 1 061 448 400
�
�
Back panel connectors for alumimiumback panel or 16 mm / (5/8") wooden back panel
Back panel connectors fixed with ø 3,5 mm / (#6) pan-head screws,length 12 mm (1/2")
Cut to size length back panels2000 mm / (78 3/4")powder-coated aluminiumFinish: silver
Article Order no. PU
Cut to size length back panels 1 063 674 10
Corner connectors fixed with ø 3,5 mm / (#6) pan-head screws, length 20 mm (25/32")Back panels for standard European measurements available on request
� Cut to size front panel 2000 mm / (78 3/4")anodized aluminiumFinish: silver
Article Order no. PU
Cut to size front panel 9 025 970 10
� Corner connectors for cut to size front panelplasticFinish: grey
Article Order no. PUleft right
Corner connectors 9 022 273 9 022 274 40
Article Finish Order no. PUleft right
Back panel powder-coated silver 1 062 501 1 062 502 40connectors nickel-plated 9 054 503 9 054 504 40
KAT_096_110_G5_USA.qxd 03.02.2006 13:13 Uhr Seite 100
101
Nominal Minimum QUADRO V6 QUADRO V6 Silent System QUADRO V6+ Silent Systemlength cabinet full-extension runner full-extension runner full-extension runner
depth Load capacity Load capacity Load capacitymax. 66 lbs (30 kg) max. 66 lbs (30 kg) max. 110 lbs (50 kg)
mm / inch mm left right PU left right PU left right PU
260 / (10 1/4“) 279 / (11“) 1 042 914 1 042 915 32 9 047 180 9 047 181 20 - - -350 / (13 3/4“) 365 / (14 3/8“) 1 043 054 1 043 055 32 9 046 304 9 046 305 20 - - -420 / (16 1/2“) 435 / (17 1/8“) 1 040 680 1 040 681 32 9 046 294 9 046 295 20 9 040 153 9 040 154 16470 / (18 1/2“) 485 / (19 1/8“) 1 039 999 1 040 000 32 9 046 288 9 046 289 20 9 039 738* 9 039 741* 16520 / (20 1/2“) 535 / (21 1/16“) 1 043 199 1 043 200 32 9 047 171 9 047 172 20 9 040 166 9 040 167 16
16
106 min.108101min.103 70 9,5(3/8") (4 3/16") (41/4")(41/16")
9,5(3/8")
37(11/2")
(4") (2 3/4")
(5/8")
(1/2")12,5
42
(1/2")12,5
(111/16")
InnoTech with Quadro V6+ full extension runner
InnoTech with Quadro V6 full extension runner
Usable inside width = inside cabinet width - 71 (2 13/16“)
Inside cabinet width
37
Cabinet front edge
Nominal length (see table below)
Usable inside length = nominal length - 24 (15/16“)
Minimum cabinet depth (see table below)
Cabinet width
Dimensions
Inside cabinet width
Toolless disassembly
Front panel
Toolless assembly
Front panel adjustment see page 97
Aluminium/wooden back panel = inside cabinet width - 88 (3 7/16“)
Bottom panel width = inside cabinet width
- 75,5 (3“)
Aluminium front panel =Inside cabinet width
- 95,5 (3 3/4“)
Bottom depth withaluminium rear panel:+ aluminium panel =
nominal length - 3 (1/8“)
with wooden rear panel:+ aluminium panel = nominal length + 10* (3/8“)
Wooden backpanel =65,5 (2 1/16“)
* for flush bottom and back panels!
Wooden backpanel assembly
Panhead screwø 3,5 x 12
Back panel connectors
* Minimum cabinet depth: 496 mm / (19 5/8“)
All Inch fraction numbersare approximated values.Please use metric measuresfor accurate construction.
KAT_096_110_G5_USA.qxd 01.02.2006 18:23 Uhr Seite 101
102
InnoTech Internal pot-and-pan drawerSteel profile system for variable internal pot-and-pan drawer widths
System benefits
• Variable pot-and-pan drawer widths• 3 nominal drawer lengths: 420/470/520 mm• Surface finish: silver• Quick insertion and removal of the drawer• Simple assembly of lengthwise railings• No bottom panel machining• Toolless assembly/disassembly and convenient
front panel adjustment• Perfect drawer action with
QUADRO full extension runner
�
�
��
�
��
Cut to size length front panel for non-standard widths, 2000 mm / (78 3/4")anodized aluminiumFinish: silver
� Corner connectors for inside pot-and-pan drawer 144 mm / (5 11/16") front panelsplasticFinish: silver
Article Order no. PU
Cut to size length front panel 9 025 970 10
Article Order no. PUleft right
Corner connectors 9 022 284 9 022 285 40
Crosswise railing for front panel insidepot-and-pan drawer, cut to size widths, 1141 mm / (44 15/16")powder-coated steel, silver
Article Order no. PU
Crosswise railing 1 074 009 80
� Lengthwise railing for inside pot-and-pan drawerpowder-coated steel with silver finish or stainless steel All connectors are premounted, right and left identical
Article Length Order no. PUmm / inch
Lengthwise railing, 420 / (16 1/2“) 1 063 796 80powder-coated steel 470 / (18 1/2“) 1 063 797 80with silver finish 520 / (20 1/2“) 1 063 798 80
Lengthwise railing, 420 / (16 1/2“) 9 051 864 80stainless steel 470 / (18 1/2“) 9 051 863 80
520 / (20 1/2“) 9 051 875 80
Article Nom. length Order no. PUmm / inch
TopSide for inside 420 / (16 1/2“) 9 039 758 100 setspot-and-pan 470 / (18 1/2“) 9 039 761 100 setsdrawer 520 / (20 1/2“) 9 039 762 100 sets
� TopSide for inside pot-and-pan drawer 144 mm / (5 11/16") optionaltranslucent plastic
� Cover capplastic, with optional printingFinish: grey
Article Order no. PU
Cover cap 1 061 448 400
� / � / � see pages 96 and 98� Cover cap Cut to size length front panel for non-standard widths� Corner connector for inside pan drawer
144 mm front panels Crosswise railing for front panel inside pan drawer� Lengthwise railing for inside pan drawer� TopSide for inside pot-and-pan drawer
Crosswise railing length = inside cabinet width - 27
KAT_096_110_G5_USA.qxd 03.02.2006 13:14 Uhr Seite 102
103
Nominal Minimum QUADRO V6 QUADRO V6 Silent System QUADRO V6+ Silent Systemlength cabinet full-extension runner full-extension runner full-extension runner
depth Load capacity Load capacity Load capacitymax. 66 lbs (30 kg) max. 66 lbs (30 kg) max. 110 lbs (50 kg)
mm / inch mm left right PU left right PU left right PU
260 / (10 1/4“) 279 / (11“) 1 042 914 1 042 915 32 9 047 180 9 047 181 20 - - -350 / (13 3/4“) 365 / (14 3/8“) 1 043 054 1 043 055 32 9 046 304 9 046 305 20 - - -420 / (16 1/2“) 435 / (17 1/8“) 1 040 680 1 040 681 32 9 046 294 9 046 295 20 9 040 153 9 040 154 16470 / (18 1/2“) 485 / (19 1/8“) 1 039 999 1 040 000 32 9 046 288 9 046 289 20 9 039 738* 9 039 741* 16520 / (20 1/2“) 535 / (21 1/16“) 1 043 199 1 043 200 32 9 047 171 9 047 172 20 9 040 166 9 040 167 16
16
144
70
min. 179 177 min. 184182(71/16") (615/16")
37
9,5(3/8")
(5/8")
(71/4")(73/16 ")
9,5(3/8")
(511/16")
(2 3/4")
(1/2")12,5
42(111/16")
(1/2")12,5
(11/2")
InnoTech with Quadro V6+ full extension runner
InnoTech with Quadro V6 full extension runner
Usable inside width = inside cabinet width - 71 (2 13/16“)
Inside cabinet width
37
Cabinet front edge
Nominal length (see table below)
Usable inside length = nominal length - 24 (15/16“)
Minimum cabinet depth (see table below)
Cabinet width
Dimensions
Inside cabinet width
Toolless assembly
Toolless disassembly
Front panel adjustment see page 97
Aluminium/wooden back panel = inside cabinet width - 88 (3 7/16“)
Aluminium front panel = Inside cabinet width
- 95,5 (3 3/4“)
Bottom panel width = inside cabinet width
- 2 x EB - 51,5
Wooden backpanel =144 (5 11/16“)
Bottom depth withaluminium rear panel:+ aluminium panel =
nominal length - 3 (1/8“)
with wooden rear panel:+ aluminium panel = nominal length + 10* (3/8“)
* for flush bottom and back panels!
Wooden back panel assembly Front panel
Back panel connectors
Panhead screw ø 3,5 x 12
* Minimum cabinet depth: 496 mm / (19 5/8“)
All Inch fraction numbersare approximated values.Please use metric measuresfor accurate construction.
KAT_096_110_G5_USA.qxd 01.02.2006 18:23 Uhr Seite 103
70 23
55(23/4") (23/16")
12,5 (1/2")
104
InnoTech - AccessoriesCutlery trays for variable drawer widths
Cutlery insert for cut to size widths,attractive design to match InnoTech drawers
• Silver-grained finish• Universal application• Impact-resistant polystyrene• Environmentally friendly, fully recyclable• Antistatic, easy to clean• Easy to trim to size
Article Cabinet width Order no. PUmm / inch
Cutlery tray 293 - 342 / (11 9/16“) - (13 7/16“) 044 954 1393 - 442 / (15 1/2“) - (17 3/8“) 044 952 1493 - 542 / (19 7/16“) - (21 5/16“) 044 949 1593 - 642 / (23 3/8“) - (25 1/4“) 044 947 1893 - 942 / (35 3/16“) - (37 1/16“) 044 945 1
Cutlery insert, non-standard widthsCutlery tray depth: 441- 520 mmFinish: silver
* Trim sizes for cutlery insert
Trimmed width = inside cabinet width - 60 (2 3/8“)
Trimmed depth• for drawer = nominal length - 7,7 (5/16“)• for internal drawer = nominal length - 22 (7/8“)
* Trimmed width
All Inch fraction numbers are approximated values.Please use metric measures for accurate construction.
The wide rim can be trimmed to fit drawer size. Use a circular saw and calculate tray size using the following formulae:
70(23/4”)
55 (23/16”)
12,5 (1/2”)
KAT_096_110_G5_USA.qxd 01.02.2006 18:24 Uhr Seite 104
105
InnoTech - AccessoriesCrosswise railing for variable pot-and-pan drawer widths
Crosswise railing
Mount for crosswise railing
Crosswise railing for easy partitioningof variable-width pan drawers
• Can be cut to size for pot-and-pan drawer widths• Simple assembly• Easy to retrofit on existing pan drawers • Can be combined with TopSides and organizer elements• Silver finish
* Crosswise railing length = inside cabinet width - 66 (2 5/8")
*
Article Order no. PU
Mount for crosswise railing 077 925 40
Crosswise railing, cut to size widths,1140 mm / (44 7/8")powder-coated steelFinish: silver
Mount for crosswise railingplasticFinish: silver
Assembly
Article Order no. PU
Crosswise railing 077 924 5
KAT_096_110_G5_USA.qxd 01.02.2006 18:24 Uhr Seite 105
106
InnoTech - AccessoriesOrganizer systemfor variable pot-and-pan drawer widths
Universal pan drawer organizer with railing
The universal organizer with railing consists of two crosswise dividers and universal holders that can be fixed to either the crosswise or the lengthwise railing.
Assembly
Organisation element
Crosswise railing
Mount for crosswise railing
Article Order no. PU
Mount for crosswise railing 077 925 40
Crosswise railing, cut to size widths,1140 mm / (44 7/8")powder-coated steelFinish: silver
Mount for crosswise railingplasticFinish: silver
Article Order no. PU
Crosswise railing 077 924 5
All Inch fraction numbersare approximated values.Please use metric measuresfor accurate construction.
Article Order no. PU
Organisation element 013 292 1 set
Organisation elementSet contains:1 organisation element with cap, silver-grey plastic1 support piece, black plastic
KAT_096_110_G5_USA.qxd 01.02.2006 18:24 Uhr Seite 106
107
Universal Organisation contains: the Organisation element
+ aluminium partitionand is therefore optimally suited to storage of plates, pots and pans, etc. in variable width pot-and-pan drawers• Can be trimmed to individual pot-and-pan drawer widths• Secure stability under load by the aluminium partition,
no slipping possible• Variable division with the Organisation element• High quality design• Easy retrofitting with existing pot-and-pan drawers• Can be combined with TopSide and the crosswise railing –
see pages 89, 106
InnoTech - AccessoriesUniversal Organisation for variable pot-and-pan drawer widths
�� ��
Assembly
Length of aluminium partition = inside cabinet width - 263 (10 3/8“)
Support piece
Article Order no. PU
Organisation element 013 292 1 set
The Organisation element is for use with:
• the aluminium partition or • the lengthwise and crosswise railing
Set contains:1 organisation element with cap, silver-grey plastic1 support piece, black plastic
Aluminium partitioncustom length, silver anodized,length 2000 mm / (78 3/4")
Article Order no. PU
Aluminium partition 013 293 1
Organisation element
KAT_096_110_G5_USA.qxd 03.02.2006 13:17 Uhr Seite 107
108
Organisation of a variable width pot-and-pan drawer with the 6 glass storage jars provided
• 2 nominal pot-and-pan drawer widths: 470 mm (18 1/2“) and 520 mm (20 1/2“)
• Can be used in variable widths – worthwhile from a cabinet width of 600 mm (23 5/8“)
• Any desired division of central drawer area by aluminium crosswise partition and dividing elements
• Secure attachment of Side Organisation to lengthwise railing• Accommodation of loose provisions in the storage jars –
simple, safe and clean…• Packed provisions are securely positioned in the centre
of the pot-and-pan drawer• Simple assembly• Easy retrofitting with existing pot-and-pan drawers• Attractive design
InnoTech - AccessoriesSide Organisation includes glass storage jars for variable pot-and-pan drawer widths
Nominal length mm / inch Order no. PU
470 (18 1/2“) 013 294 1 set520 (20 1/2“) 013 295 1 set
Set of container holderscontains:1 set container holders, silver-grey plastic1 set TopSide, powder-coated steel, silver6 glass storage jars, with blue lid
Aluminium crosswise partitioncustom length, silver anodized, length 2000 mm (78 3/4“)
Set of container holders
Article Order no. PU
Aluminium crosswise partition 013 296 1
Dividing elementfor fixing in the aluminium crosswise partition
Set contains:1 dividing element, silver-grey plastic2 dividing element supports, silver-grey plastic
Article Order no. PU
Dividing element with support 013 397 1 set
KAT_096_110_G5_USA.qxd 03.02.2006 13:22 Uhr Seite 108
109
37
9,5
177
1612
9,5
42
70
16
144
182
32
14
96
(7”)
(11/2")
3/8")(
1/2")(
1/2")(12,5
5/8")(
(511/16")
(11/4")(23/4")
")(
1/2")(12,5
3/8")(
(111/16")
(73/16")
(313/16")
5/8")(
9/16")(
InnoTech - AccessoriesSide Organisation includes glass storage jars for variable pot-and-pan drawer widths
�
�
�
Minimumspace
requirement197
(73/16“)
Minimumspace
requirement192
(79/16“)
Cabinet widthInside cabinet width
Length of aluminium crosswise partition = inside cabinet width-354 mm (1315/16“)
3 x hole ø 10 ± 0,112,5 deep
Assembly
Panhead screw ø 3,5 x 12
InnoTech with Quadro V6+ full extension runner
110 lbs (50 kg)
InnoTech with Quadro V6 full extension runner66 lbs (30 kg)
KAT_096_110_G5_USA.qxd 01.02.2006 18:25 Uhr Seite 109
110
InnoTech - AccessoriesOrgaFlex
Undersink drawer
OrgaFlex consists of bins, plastic bin holders, corner connectors plusscrews for back panel connection, and aluminum finishersplus fasteners.
Article Order no. PU
Corner connectors 9 053 017 20
Bins with plastic bin holdersand cover
Corner connectors (left and right)and aluminium finishers
Article Order no. PU
Bins with plastic bin holders 9 053 342 1
KAT_096_110_G5_USA.qxd 01.02.2006 18:25 Uhr Seite 110
50 15
195
ø3
111
170
3
2
1
310
Assembly
�
�
�� �
�
�
�
�
KAT_111_118_G5_USA.qxd 01.02.2006 18:27 Uhr Seite 111
112
• Load capacity length-dependent up to 66 lbs (30 kg) totalweight (drawer plus contents).
• Perfect vertical and lateral stability. Optimal runner action thanks to precison steel balls running in tough, precision-manufactured steel tracks.
• Maintenance-free through self-cleaning ball tracks.• The integrated detent prevents accidental opening.• Slide-on assembly – simply place the drawer on the runners
and push home. Done!
Article Order no. Drawer Minimum Hole PU(load/length) length cabinet depth spacing b1
left right mm / inch mm / inch mm / inch
Quadro V6 15/260 / (10 1/4“) 1 042 914 1 042 915 260 / (10 1/4“) 279 / (11“) 160 / (6 5/16“) 32Quadro V6 15/350 / (13 3/4“) 1 043 054 1 043 055 350 / (13 3/4“) 365 / (14 3/8“) 160 / (6 5/16“) 32Quadro V6 30/420 / (16 1/2“) 1 040 680 1 040 681 420 / (16 1/2“) 435 / (17 1/8“) 224 / (8 13/16“) 32Quadro V6 30/470 / (18 1/2“) 1 039 999 1 040 000 470 / (18 1/2“) 485 / (19 1/8“) 256 / (10 1/16“) 32Quadro V6 30/520 / (20 1/2“) 1 043 199 1 043 200 520 / (20 1/2“) 535 / (21 1/16“) 256 / (10 1/16“) 32
All Inch fraction numbersare approximated values.Please use metric measuresfor accurate construction.
For 16 mm side panels and 12,5 mm installation width
Other lengths andQuadro 25 partial extension runner on request
Operating note
Quadro assembly
Attach the Quadro runner to the cabinetwith ø 4 mm wood screws or self-tappingscrews for ø 5 mm holes.
Slide-on assembly
Place drawer on runner and push fully in.
The number of fixing screws depends on the total weight,the type of screws and the type of material used for the cabinet.
InnoTechQuadro V6 full extension runnerSlide-on assembly with STOP-CONTROLLoad capacity 66 lbs (30 kg)
�
KAT_111_118_G5_USA.qxd 01.02.2006 18:27 Uhr Seite 112
9b1
6
379 32
(1/4")
(17/16")(3/8") (3/8")(11/4")
113
66 lbs(30 kg)
STOP-CONTROL
9,5
1637
12
9732
144,5
12,5
70(23/4")
(11/4")
(9/16")
(1/2")
(313/16")
(11/2")
(1/2")
(3/8")
(3/16")
Disassembly
Cabinet front edge
The given dimensions assume a 1,5 mm gap between front panel and cabinet front. Change the hole pattern to allow for thicker front panel stops.
KAT_111_118_G5_USA.qxd 01.02.2006 18:27 Uhr Seite 113
114
InnoTechQuadro V6 full extension runner with Silent SystemSlide-on assemblyLoad capacity 66 lbs (30 kg)
• Load capacity length-dependent up to 66 lbs (30 kg) total weight (drawer plus contents).
• Silent System: the damping device integrated in Quadro V6 closes the drawer softly and soundlessly.
• Perfect vertical and lateral stability.Optimal runner action thanks to precison steel balls running in tough, precision-manufactured steel tracks.
• Maintenance-free through self-cleaning ball tracks.• The integrated detent prevents accidental opening.• Slide-on assembly – simply place the drawer on the runners
and push home. Done!
Article Order no. Drawer Minimum Hole PU(load/length) length cabinet depth spacing b1
left right mm / inch mm / inch mm / inch
Quadro V6 15/260 Silent System/ (10 1/4“) 9 017 180 9 047 181 260 / (10 1/4“) 279 / (11“) 160 / (6 5/16“) 20Quadro V6 15/350 Silent System/ (13 3/4“) 9 046 304 9 046 305 350 / (13 3/4“) 365 / (14 3/8“) 160 / (6 5/16“) 20Quadro V6 30/420 Silent System/ (16 1/2“) 9 046 294 9 046 295 420 / (16 1/2“) 435 / (17 1/8“) 224 / (8 13/16“) 20Quadro V6 30/470 Silent System/ (18 1/2“) 9 046 288 9 046 289 470 / (18 1/2“) 485 / (19 1/8“) 256 / (10 1/16“) 20Quadro V6 30/520 Silent System/ (20 1/2“) 9 047 171 9 047 172 520 / (20 1/2“) 535 / (21 1/16“) 256 / (10 1/16“) 20
All Inch fraction numbersare approximated values.Please use metric measuresfor accurate construction.
Other lengths andQuadro 25 partial extension runner on request
Operating note
Quadro assembly
Attach the Quadro runner to the cabinetwith ø 4 mm wood screws or self-tappingscrews for ø 5 mm holes.
Slide-on assembly
Place drawer on runner and push fully in.
The number of fixing screws depends on the total weight,the type of screws and the type of material used for the cabinet.
�
KAT_111_118_G5_USA.qxd 01.02.2006 18:27 Uhr Seite 114
115
66 lbs(30 kg)
9,5
1637
12
97
12,5
70
32
144,5
22
16 22,5
(23/4")
(11/4")
(9/16")
(5/8")
(313/16")
(11/2")
(1/2")
(3/8")
(3/16")
(5/8") (7/8")
(1/2") (7/8")
9b1
6
379 32
(1/4")
(17/16")(3/8") (3/8")(11/4")
Disassembly
Cabinet front edge
The given dimensions assume a 1,5 mm gap between front panel and cabinet front. Change the hole pattern to allow for thicker front panel stops.
KAT_111_118_G5_USA.qxd 01.02.2006 18:28 Uhr Seite 115
116
InnoTechQuadro V6+ full extension runner with Silent SystemSlide-on assemblyLoad capacity 110 lbs (50 kg)
• Load capacity length-dependent up to 110 lbs (50 kg) totalweight (drawer plus contents).
• Silent System: the damping device integrated in Quadro V6+closes the drawer softly and soundlessly.
• Perfect vertical and lateral stability. Optimal runner action thanks to precison steel balls running in tough, precision-manufactured steel tracks.
• Maintenance-free through self-cleaning ball tracks.• The integrated detent prevents accidental opening.• Slide-on assembly – simply place the drawer on the runners
and push home. Done!
Article Order no. Drawer Minimum Hole PU(load/length) length cabinet depth spacing b1
left right mm / inch mm / inch mm / inch
Quadro V6+ 50/420 Silent System/ (16 1/2“) 9 040 153 9 040 154 420 / (16 1/2“) 435 / (17 1/8“) 224 / (8 13/16“) 16Quadro V6+ 50/470 Silent System/ (18 1/2“) 9 039 738 9 039 741 470 / (18 1/2“) 496 / (19 5/8“) 256 / (10 1/16“) 16Quadro V6+ 50/520 Silent System/ (20 1/2“) 9 040 166 9 040 167 520 / (20 1/2“) 535 / (21 1/16“) 256 / (10 1/16“) 16
All Inch fraction numbersare approximated values.Please use metric measuresfor accurate construction.
Other lengths on request
Operating note
Quadro assembly
Attach the Quadro runner to the cabinetwith ø 4 mm wood screws or self-tappingscrews for ø 5 mm holes.
Slide-on assembly
Place drawer on runner and push fully in.
The number of fixing screws depends on the total weight,the type of screws and the type of material used for the cabinet.
�
KAT_111_118_G5_USA.qxd 01.02.2006 18:28 Uhr Seite 116
117
110 lbs(50 kg)
9,5
1642
12
102
12,5
70
32
144,5
22
16 22,5
(23/4")
(11/4")
(9/16")
(5/8")
(4")
(111/16")
(1/2")
(3/8")
(3/16")
(5/8") (7/8")
(1/2") (7/8")
9b1
6
379 32
(1/4")
(17/16") (3/8") (3/8")(11/4")
Disassembly
The given dimensions assume a 1,5 mm gap between front panel and cabinet front. Change the hole pattern to allow for thicker front panel stops.
Cabinet front edge
KAT_111_118_G5_USA.qxd 01.02.2006 18:28 Uhr Seite 117
118
InnoTechAssembly
InnoFit assembly jig
This jig is used to assemble InnoTech drawers and pot-and-pan drawers with unit widths from 275 mm / (10 3/8") to 1200 mm / (47 1/4") and unit depths from 260 mm / (10 1/4") to 620 mm / (24 15/16"). Assembly cycle time approx. 25 seconds Pneumatic: air 6-8 bar/100 psi
Article Order no. PU
InnoFit assembly jig 9 004 618 1
InnoFit N assembly jig
This jig is used to assemble InnoTech drawers and pot-and-pan drawers with unit widths from 275 mm / (10 3/8") to 1200 mm / (47 1/4") and unit depths from 260 mm / (10 1/4") to to 620 mm / (24 15/16"). Adjustable to all standard formats using fixed stops. Can be adjusted precisely by hand for all intermediate dimensions. The jig has a footprint of 2000 x 1400 mm / (78 3/4") x (55 1/8") and must be mounted on a workbench.Assembly cycle time approx. 45 seconds Pneumatic: air 6-8 bar/100 psi
Article Order no. PU
InnoFit N assembly jig 9 019 743 1
InnoFit 2 assembly jig
This assembly jig has been designed for simple and efficient assembly of all InnoTech variants. It operates without electric power or compressed air. The jig has a footprint of just 1200 x 800 mm / (47 1/4") x (31 1/2").Convenient measurement scales are used to set up drawers and pan drawers for unit widths from 275 mm / (10 3/8") to 1200 mm / (47 1/4") and unit depths from 260 mm / (10 1/4") to 620 mm / (24 15/16"). The set includes a fixed stop each for the unit width and unit depth. Assembly cycle time approx. 60 seconds
Article Order no. PU
� InnoFit 2 assembly jig 1 083 604 1
Striker 078 091
1
All Inch fraction numbersare approximated values.Please use metric measuresfor accurate construction.
KAT_111_118_G5_USA.qxd 01.02.2006 18:28 Uhr Seite 118
119119
Quadro IW 21The ball bearing principlefor lifetime satisfaction
119
KAT_119_132_G5_USA.qxd 01.02.2006 18:36 Uhr Seite 119
High on durabilitySteel balls never lose their perfectlyround shape even when they're on themove and under pressure. Dependingon the Quadro version, up to 180 pre-cision balls made of chrome-hardenedsteel guarantee the incredibly smoothsliding action.
Tracking stabilityThe special profiles and preci-sion steel balls work in perfectharmony. This tracking stabilityguarantees perfect draweraction. All forces are evenlydistributed for excellent vertical and lateral stability.
Quadro –designed for a very long life
Self-cleaningDirt doesn't stand a chance in aQuadro runner. The system is self-cleaning. Any dirt is simply sweptaside by the steel balls as they traverse along the track. Even afterlong service, the silky smooth actionwill not be impaired by dirt particles.
End-to-end qualityQuadro runners have a supreme trackrecord for quality and reliability.Master-minded over 20 years ago andcontinually improved, they embodyfittings technology at its best from one of Germany's - and the world's -largest furniture fittings manufacturer.
120
KAT_119_132_G5_USA.qxd 01.02.2006 18:36 Uhr Seite 120
Silent System – sounds great!
How Silent System closes drawers withQuadro IW21 softly and soundless
Noise levels in the kitchen shoot up whendrawers are closed vigorously. The frontslams against the unit. Drawer contents rattle. Contents get shaken up. Things clatter,nerves jangle. Drawers with Silent Systembanish this type of disturbance from the kitchen. They help to create a relaxed moodand a more efficient working environment.
Silent System closes all drawers gently and softly – from lightly laden cutlery drawers. Silent System is integrated in the Quadro IW21 runner saving kitchenmanufacturers additional production steps.Silent System is completely invisible, completely effective and very impressive.
121
KAT_119_132_G5_USA.qxd 01.02.2006 18:52 Uhr Seite 121
Quadro –the ball bearing
principle…
122
KAT_119_132_G5_USA.qxd 01.02.2006 18:53 Uhr Seite 122
+30%
Quadro IW21partial extension
Quadro IW21full extension
You’ll hardly hear a Quadro and you won’t see it at all. The concealed Quadro runner is a particulary good choice forhigh-quality furniture: only theperfect function reveals theadvanced technology that is builtinto the furniture.Quadro partial and full extensionrunners are compatible for faceframe and frameless cabinets –of course with an optional sideor rear attachment.
…for lifetime satisfaction
Quadro partialand full extension drawer
Quadro IW21 partial and full extension permit 3 different configurations:
Face framerear attached
Overlay Inset
Face frameside attached
Inset applicationside attached
123
KAT_119_132_G5_USA.qxd 01.02.2006 18:54 Uhr Seite 123
124
QUADRO IW 21 Partial-extension runner for wooden drawersLoad capacity up to 75 lbs dynamic, 100 lbs static
• Load capacity up to 75 lbs dynamic, 100 lbs static• Perfect vertical and lateral stability.
The robust, resilient tracks ensure optimal runner action through precison-guided steel balls.
• Maintenance-free through self-cleaning ball tracks.• Selfclose – the spring-operated
mechanism acts independently of load and closes the drawer safelyand automatically.
• Slide-on assembly – simply place the drawer on the runners andpush in for connection.
• Flexibility through interchangeability – Quadro partial and fullextension runners interchange without altering drawer dimensions.
• For 5/8” (16 mm) drawer material thickness and 1/2” (12 mm).
Values are based on using plastic rear attachment set (9 026 835)When using metal rear attachment set (9 055 093) add 1/6” to max. cabinet depth
Article Order no. PU
Front fixing clip set 9 026 839 10 sets
DimensionsQuadro IW 21 accessories
Front fixing clip setcontains:1 front fixing clip left1 front fixing clip right2 spacers for 1/2” (12 mm) box thickness
Article Order no. Cabinet Drawer box Setsdepth inch length inch per box
Quadro IW 21 partial extension 9” 9 022 783 9 9/16 - 13 1/8 9 10
Quadro IW 21 partial extension 12” 9 022 774 12 3/4 - 15 3/8 12 10
Quadro IW 21 partial extension 15” 9 022 762 15 3/4 - 18 3/8 15 10
Quadro IW 21 partial extension 18” 9 022 751 18 3/4 - 21 3/8 18 10
Quadro IW 21 partial extension 21” 9 022 729 21 3/4 - 24 3/8 21 10
21(13/16”)
7 (9/32”)
11(7/16”)
ø6 x10 (1/4”x3/8”)
35
12-16(1/2”-5/8”)
12 (1/2”)
25(1”)
12 (1/2”)
min. 3 (1/8”)
(13/8”)
-42 (15/8”)
Outside drawer box width
For box thickness Deduct from inside cabinet width1/2“ 5/8“5/8“ 3/8“
Outside drawer box width
Inside cabinet width
Inside cabinet width
KAT_119_132_G5_USA.qxd 01.02.2006 18:54 Uhr Seite 124
125
11
9
ø6
Quadro IW21/18”
Quadro IW21/21”
Quadro IW21/15”
Quadro IW21/12”
Quadro IW21/9” 19,053/4“
96 (3-3/4“)
128 (5 1/32“) 96 (3-3/4“)
128 (5 1/32“) 192 (7-9/16“)
96 (3-3/4“)
224 (8 13/16“) 192 (7-9/16“)
224 (8 13/16“) 256 (10-1/16“)
6 (1/4“) 9 (11/32“) 33 (1-5/16“)
32 (1-1/4“)
24,3(31/32“)
36,3(1-7/16“)
10
10
10
10
10
Hole pattern for Quadro IW 21 Drawer length 9“ - 21“
75/100lbs
Cabinet front edge
Drawer length 9“
Drawer length 12“
Drawer length 15“
Drawer length 18“
Drawer length 21“
Setback 4 (5/32“)
Cabinet depth
Cabinet depth
Cabinet depth
Cabinet depth
Cabinet depth
Details of front holes
Details of connection
Typ.
KAT_119_132_G5_USA.qxd 03.02.2006 14:24 Uhr Seite 125
126
21(13/16”)
7 (9/32”)
11(7/16”)
ø6 x10 (1/4”x3/8”)
35(13/8”)
12-16(1/2”-5/8”)
12 (1/2”)
25(1”)
12 (1/2”)
min. 3 (1/8”)
-42 (15/8”)
QUADRO IW 21 Full-extension runner for wooden drawersLoad capacity up to 75 lbs dynamic, 100 lbs static
• Load capacity up to 75 lbs dynamic, 100 lbs static• Perfect vertical and lateral stability.
The robust, resilient tracks ensure optimal runner action through precison-guided steel balls.
• Maintenance-free through self-cleaning ball tracks.• Selfclose – the spring-operated
mechanism acts independently of load and closes the drawer safelyand automatically.
• Slide-on assembly – simply place the drawer on the runners andpush in for connection.
• Flexibility through interchangeability – Quadro partial and fullextension runners interchange without altering drawer dimensions.
• For 5/8” (16 mm) drawer material thickness and 1/2” (12 mm).
Article Order no. Cabinet Drawer box Setsdepth inch length inch per box
Quadro IW 21 full extension 9” 9 026 381 9 9/16 - 13 1/8 9 10
Quadro IW 21 full extension 12” 9 026 422 12 3/4 - 15 3/8 12 10
Quadro IW 21 full extension 15” 9 026 410 15 3/4 - 18 3/8 15 10
Quadro IW 21 full extension 18” 9 026 309 18 3/4 - 21 3/8 18 10
Quadro IW 21 full extension 21” 9 026 277 21 3/4 - 24 3/8 21 10
Article Order no. PU
Front fixing clip set 9 026 839 10 sets
Assembly front fixing clipQuadro IW 21 accessories
Front fixing clip setcontains:1 front fixing clip left1 front fixing clip right2 spacers for 1/2” (12 mm) box thickness
Outside drawer box width
For box thickness Deduct from inside cabinet width1/2“ 5/8“5/8“ 3/8“
Outside drawer box width
Inside cabinet width
Inside cabinet width
Values are based on using plastic rear attachment set (9 026 835)When using metal rear attachment set (9 055 093) add 1/6” to max. cabinet depth
KAT_119_132_G5_USA.qxd 01.02.2006 18:54 Uhr Seite 126
127
Hole pattern for Quadro IW 21 Drawer length 9“ - 21“
19,053/4“
128 (5 1/16“) 96 (3 3/4“)
128 (5 1/16“) 192 (7 9/16“)
224 (8 13/16“) 192 (7 9/16“)
224 (8 13/16“) 256 (10 1/16“)
96 (3 3/4“) 96 (3 3/4“)
11
9
Quadro IW21/18”
Quadro IW21/21”
Quadro IW21/15”
Quadro IW21/12”
Quadro IW21/9”
ø6
6 (1/4“) 9 (11/32“)33 (1-5/16“)
32 (1-1/4“)
24,3(31/32“)
36,3(1-7/16“)
75/100lbs
Cabinet front edge
Drawer length 9“
Cabinet depth
Details of front holes
Details of connection
Typ.
Cabinet depth
Cabinet depth
Cabinet depth
Cabinet depth
Drawer length 12“
Drawer length 15“
Setback 4 (5/32“)
Drawer length 18“
Drawer length 21“
KAT_119_132_G5_USA.qxd 01.02.2006 18:54 Uhr Seite 127
128
QUADRO IW 21 Silent SystemFull-extension runner for wooden drawersLoad capacity up to 75 lbs dynamic, 100 lbs static
• Load capacity up to 75 lbs dynamic, 100 lbs static• Perfect vertical and lateral stability.
The robust, resilient tracks ensure optimal runner action through precison-guided steel balls.
• Maintenance-free through self-cleaning ball tracks.• Soft closure with selfclose – the spring-operated
mechanism acts independently of load and closes the drawer safelyand automatically.
• Slide-on assembly – simply place the drawer on the runners andpush in for connection.
• Flexibility through interchangeability – Quadro partial and fullextension runners interchange without altering drawer dimensions.
• For 5/8” (16 mm) drawer material thickness and 1/2” (12 mm).• Silent System: the damping device integrated in Quadro IW 21
closes the drawer softly and soundlessly.
Article Order no. Cabinet Drawer box Setsdepth inch length inch per box
Quadro IW 21 Silent System 9” 9 048 982 9 9/16 - 13 1/8 9 10
Quadro IW 21 Silent System 12” 9 048 740 12 3/4 - 15 3/8 12 10
Quadro IW 21 Silent System 15” 9 048 976 15 3/4 - 18 3/8 15 10
Quadro IW 21 Silent System 18” 9 048 793 18 3/4 - 21 3/8 18 10
Quadro IW 21 Silent System 21” 9 048 776 21 3/4 - 24 3/8 21 10
Article Order no. PU
Front fixing clip set 9 026 839 10 sets
Assembly front fixing clipQuadro IW 21 accessories
Front fixing clip setcontains:1 front fixing clip left1 front fixing clip right2 spacers for 1/2” (12 mm) box thickness
Outside drawer box width
For box thickness Deduct from inside cabinet width1/2“ 5/8“5/8“ 3/8“
21(13/16”)
7 (9/32”)
11(7/16”)
ø6 x10 (1/4”x3/8”)
12-16(1/2”-5/8”)
12 (1/2”)
25(1”)
12 (1/2”)
min. 3 (1/8”)
35(13/8”)
-42 (15/8”)
Outside drawer box width
Inside cabinet width
Inside cabinet width
Values are based on using plastic rear attachment set (9 026 835)When using metal rear attachment set (9 055 093) add 1/6” to max. cabinet depth
KAT_119_132_G5_USA.qxd 01.02.2006 18:54 Uhr Seite 128
129
Hole pattern for Quadro IW 21 Drawer length 9“ - 21“
75/100lbs
19,053/4“
128 (5 1/16“) 96 (3 3/4“)
128 (5 1/16“) 192 (7 9/16“)
224 (8 13/16“) 192 (7 9/16“)
224 (8 13/16“) 256 (10 1/16“)
96 (3 3/4“) 96 (3 3/4“)
11
9
Quadro IW21/18”
Quadro IW21/21”
Quadro IW21/15”
Quadro IW21/12”
Quadro IW21/9”
ø6
6 (1/4“) 9 (11/32“)33 (1-5/16“)
32 (1-1/4“)
24,3(31/32“)
36,3(1-7/16“)
Cabinet front edge
Drawer length 9“
Cabinet depth
Details of front holes
Details of connection
Typ.
Cabinet depth
Cabinet depth
Cabinet depth
Cabinet depth
Drawer length 12“
Drawer length 15“
Setback 4 (5/32“)
Drawer length 18“
Drawer length 21“
KAT_119_132_G5_USA.qxd 01.02.2006 18:54 Uhr Seite 129
130
QUADRO IW 21 Optional accessories
Assembly
Assembly
1
2
3
Rear attachment set (screw-on)contains:2 rear mount brackets, metal2 sledges, plastic
Side adjustment ± 1,5 mmAdditional adjustment via oblong holes Side adjustment ± 1,5 mm
Article Order no. PU
Rear attachment set 9 055 093 10 sets
Side attachment setcontains:2 side brackets, metal2 fixing items, plastic2 special connecting nuts2 connecting screws M4
Article Order no. Sets per box
Side attachment set 9 036 837 10 sets
Rear attachment setcontains:2 rear mount brackets, plastic2 sledges, plastic
Article Order no. PU
Rear attachment set 9 026 835 10 sets
Location of rear bracket
66
38
48
4519
6
39
27
11
8,5
1210
KAT_119_132_G5_USA.qxd 01.02.2006 18:54 Uhr Seite 130
131
12-161/2”-5/8”
12-161/2”-5/8”
12-161/2”-5/8”
Disassembly
1
2
25
Toolless height adjustment + 2 mm
±1,5
The flexible rear connector is capableof serving different cabinet depths
with just one drawer length.
Quadro IW 21partial extension
Quadro IW 21full extension
Spacer used with 1/2” drawer box
Drawer must be notched at rear
75/100lbs
Assembly
The hole pattern is identicalfor Quadro IW 21 partial,full extension runners andfull extension runners withSilent System.
Quadro IW 21full extension
with Silent System
KAT_119_132_G5_USA.qxd 01.02.2006 18:55 Uhr Seite 131
132
KAT_119_132_G5_USA.qxd 01.02.2006 18:55 Uhr Seite 132
133133
Quadro IW 20Partial and full-extension runnersfor wooden drawers
133
KAT_133_142_G5_USA.qxd 01.02.2006 18:58 Uhr Seite 133
134
Quadro IW 20 for wooden drawersHeavy duty in furniture and household appliances
KAT_133_142_G5_USA.qxd 03.02.2006 15:03 Uhr Seite 134
9,5
19,5
4
12
ø6
7max. 16
IW 20
12-15
11
32
64
135
Quadro IW 20 Part-extension runner for wooden drawersLoad capacity 100 lbs K.C.M.A.
• Load capacity 100 lbs K.C.M.A.• Perfect vertical and lateral stability.
The robust, resilient tracks ensure optimal runner action through precison-guided steel balls.
• Maintenance-free through self-cleaning ball tracks.• Selfclose – the spring-operated mechanism acts independently of
load and closes the drawer safely and automatically. • Slide-on assembly – simply place the drawer on the runners
and push home. Done!• Flexibility through interchangeability – swap between Quadro
partial and full extension runners without changing cabinet, drawer or front panel dimensions!
The special profiles are made of galvanized steel, the cage for the precision steel balls is made of noise-absorbing plastic.
Assembly
Article / Drawer length Min. cabinet depth Order no. PU Order no. PU ExtensionNominal length mm 3-sided drawer 4-sided drawer loss
1/2“ 5/8“
Quadro IW 20/250 9 13/16“ 10 5/16“ 10 7/16“ 10 7/8“ 072 904 5 sets – – 2 15/16“
Quadro IW 20/300 11 3/4“ 12 1/4“ 12 3/8“ 12 3/4“ 072 905 5 sets – – 2 15/16“
Quadro IW 20/350 13 3/4“ 14 1/4“ 14 3/8“ 14 3/4“ 073 210 5 sets – – 2 7/16“
Quadro IW 20/400 15 3/4“ 16 1/4“ 16 3/8“ 16 3/4“ 073 211 5 sets 1 043 836 38 sets 3 15/16“
Quadro IW 20/450 17 11/16“ 18 3/16“ 18 5/16“ 18 11/16“ 073 212 5 sets 1 043 841 38 sets 3 3/8“
Quadro IW 20/500 19 11/16“ 20 3/16“ 20 5/16“ 20 11/16“ 033 687 5 sets 1 029 956 38 sets 3 7/8“
Quadro IW 20/550 21 5/8“ 22 1/8“ 22 1/4“ 22 5/8“ 073 214 5 sets 1 043 844 38 sets 3 7/8“
�
Disassembly
Catch with integrated front panel height adjustment
Article Finish Order no. PU
Catch left black 1 067 494 100
Catch right black 1 067 495 100
�
Countersunk screw ø 4
Euro screwcountersunk
max. 16
100 lbs
Outside drawer box widthFor box thickness Deduct from inside cabinet width
1/2“ 9/16“5/8“ 5/16“
KAT_133_142_G5_USA.qxd 01.02.2006 18:59 Uhr Seite 135
10 ø6
11
Quadro IW20/550 (215/8”)
Quadro IW20/450 (1711/16”)
Quadro IW20/500 (1911/16”)
Quadro IW20/400 (153/4”)
Quadro IW20/350 (133/4”)
Quadro IW20/250 (913/16”)
Quadro IW20/300 (1125/32”)
16
3732
160
50 16
3732
160
62 16
3732
192
74 16
3732
224
86 16
3732
256
98 16
3732
288
98 16
3732
320
96 9
96 9
96 9
96 9
96 9
96 9
96 9
50
136
Hole pattern for Quadro IW 20nominal length 250 – 550 mm (9 13/16“ - 21 5/8“)
Drawings show a 3-sided box. When using a typical 4-sided box, please shift the track back into the cabinet the same dimension as the box material thickness.
Drawer length
Drawer length
Drawer length
Drawer length
Drawer length
Drawer length
Drawer length
Min. cabinet depth
Min. cabinet depth
Min. cabinet depth
Min. cabinet depth
Min. cabinet depth
Min. cabinet depth
Min. cabinet depth
Cabinet front edge
Extensionloss
Quadro IW 20 Part-extension runner for wooden drawersLoad capacity 100 lbs K.C.M.A. 100 lbs
KAT_133_142_G5_USA.qxd 01.02.2006 18:59 Uhr Seite 136
32
64
26,5
9,512
7
max. 16
IW 20
12-1536
ø6
11
137
Quadro IW 20 Full-extension runner for wooden drawersLoad capacity 100 lbs K.C.M.A.
• Load capacity 100 lbs K.C.M.A.• Perfect vertical and lateral stability.
The robust, resilient tracks ensure optimal runner action through precison-guided steel balls.
• Maintenance-free through self-cleaning ball tracks.• Selfclose – the spring-operated mechanism acts independently of
load and closes the drawer safely and automatically. • Slide-on assembly – simply place the drawer on the runners and
push home. Done!• Flexibility through interchangeability – swap between Quadro
partial and full extension runners without changing cabinet, drawer or front panel dimensions!
The special profiles are made of galvanized steel, the cage for the precision steel balls is made of noise-absorbing plastic.
Assembly
�
�
Countersunkscrew ø 4
Euro screwcountersunk
Disassembly
max.16
Catch with integrated front panel height adjustment
Article Finish Order no. PU
Catch left black 1 067 494 100
Catch right black 1 067 495 100
Article / Drawer length Min. cabinet depth Order no. PU Order no. PUNominal length mm 3-sided drawer 4-sided drawer
1/2“ 5/8“Quadro IW 20/280 11“ 11 1/2“ 11 5/8“ 12“ 072 164 5 sets 1 042 477 30 setsQuadro IW 20/300 11 3/4“ 12 1/4“ 12 3/8“ 12 3/4“ 072 172 5 sets 1 042 781 30 setsQuadro IW 20/320 12 9/16“ 13 1/16“ 13 3/16“ 13 9/16“ 072 165 5 sets 1 042 657 30 setsQuadro IW 20/350 13 3/4“ 14 1/4“ 14 3/8“ 14 3/4“ 072 173 5 sets 1 044 077 30 setsQuadro IW 20/380 14 15/16“ 15 7/16“ 15 9/16“ 15 15/16“ 072 166 5 sets 1 042 660 30 setsQuadro IW 20/400 15 3/4“ 16 1/4“ 16 3/8“ 16 3/4“ 072 174 5 sets 1 044 162 30 setsQuadro IW 20/420 16 1/2“ 17“ 17 1/8“ 17 1/2“ 072 167 5 sets 1 042 484 30 setsQuadro IW 20/450 17 11/16“ 18 3/16“ 18 5/16“ 18 11/16“ 072 175 5 sets 1 044 253 30 setsQuadro IW 20/480 18 7/8“ 19 3/8“ 19 1/2“ 19 7/8“ 072 168 5 sets 1 042 487 30 setsQuadro IW 20/500 19 11/16“ 20 3/16“ 20 5/16“ 20 11/16“ 072 176 5 sets 1 039 448 30 setsQuadro IW 20/520 20 15/32“ 21“ 21 1/16“ 21 7/16“ 072 169 5 sets 1 042 481 30 setsQuadro IW 20/550 21 5/8“ 22 1/8“ 22 1/4“ 22 5/8“ 072 177 5 sets 1 044 260 30 setsQuadro IW 20/580 22 13/16“ 23 5/16“ 23 7/16“ 23 13/16“ 072 170 5 sets 1 042 702 24 setsQuadro IW 20/600 23 5/8“ 24 1/8“ 24 1/4“ 24 5/8“ 072 178 5 sets 1 050 437 24 sets
100 lbs
Outside drawer box widthFor box thickness Deduct from inside cabinet width
1/2“ 9/16“5/8“ 5/16“
KAT_133_142_G5_USA.qxd 01.02.2006 18:59 Uhr Seite 137
10 ø6
11
Quadro IW20/280 (11 1/32”)
3732
1609
6
9
3732
224
Quadro IW20/420 (16 17/32”)
96 9
3732
224
Quadro IW20/400 (15 3/4”)
96 9
3732
224
Quadro IW20/380 (14 15/16”)
96 9
3732
192
Quadro IW20/350 (13 3/4”)
96 9
3732
192
Quadro IW20/320 (12 9/16”)
96 9
3732
192
Quadro IW20/300 (11 25/32”)
96 9
138
Quadro IW 20 Full-extension runner for wooden drawersLoad capacity 100 lbs K.C.M.A.
Hole pattern for Quadro IW 20Nominal length 280 – 420 mm (11 1/32“ - 16 17/32“)
Drawings show a 3-sided box. When using a typical 4-sided box, please shift the track back into the cabinet the same dimension as the box material thickness.
Drawer length
Drawer length
Drawer length
Drawer length
Drawer length
Drawer length
Drawer length
Min. cabinet depth
Min. cabinet depth
Min. cabinet depth
Min. cabinet depth
Min. cabinet depth
Min. cabinet depth
Min. cabinet depth
Cabinet front edge
KAT_133_142_G5_USA.qxd 01.02.2006 18:59 Uhr Seite 138
3732
352
Quadro IW20/600 (23 5/8”)
96 9
3732
352
Quadro IW20/580 (22 13/16”)
96 9
3732
288
Quadro IW20/550 (21 5/8”)
96 9
3732
288
Quadro IW20/520 (20 15/32”)
96 9
3732
288
Quadro IW20/500 (19 11/16”)
96 9
3732
256
Quadro IW20/480 (18 7/8”)
96 9
3732
256
Quadro IW20/450 (17 11/16”)
96 9
139
Hole pattern for Quadro IW 20Nominal length 450 – 600 mm (17 11/16“ - 23 5/8“)
Drawings show a 3-sided box. When using a typical 4-sided box, please shift the track back into the cabinet the same dimension as the box material thickness.
Cabinet front edgeDrawer length
Drawer length
Drawer length
Drawer length
Drawer length
Drawer length
Drawer length
Min. cabinet depth
Min. cabinet depth
Min. cabinet depth
Min. cabinet depth
Min. cabinet depth
Min. cabinet depth
Min. cabinet depth
▲
100 lbs
KAT_133_142_G5_USA.qxd 01.02.2006 18:59 Uhr Seite 139
32
64
9,5
12
7
max.16
IW 20
12-1536
ø6
11
26
140
Quadro IW 20 Silent SystemFull-extension runner for wooden drawersLoad capacity 100 lbs K.C.M.A.
• Load capacity 100 lbs K.C.M.A.• Silent System: the cushioning system integrated in the QUADRO
V6 closes the drawer without a sound – as soft as velvet.• Perfect vertical and lateral stability.
The robust, resilient tracks ensure optimal runner action through precison-guided steel balls.
• Maintenance-free through self-cleaning ball tracks.• The integrated roll-out prevention stops accidental opening.• Slide-on assembly – simply place the drawer on the runners
and push home. Done!• Flexibility through interchangeability – swap between
Quadro partial and full extension runners without changing cabinet, drawer or front panel dimensions!
The special profiles are made of galvanized steel, the cage for the precision steel balls is made of noise-absorbing plastic.
Assembly
�
�
Countersunkscrew ø 4
Article Order no. PUø 6,3 x10,5 051 264 200ø6,3 x14 051 265 200
Countersunk Euro screwDisassembly
max.16
Catch with integrated front panel height adjustment
Article Finish Order no. PU
Catch left black 1 067 494 100
Catch right black 1 067 495 100
Article / Drawer length Min. Order no. PU Order no. PUNominal length mm 3-sided drawer 4-sided drawer cabinet depth
1/2“ 5/8“Quadro IW 20 Silent System/280 11“ 11 1/2“ 11 5/8“ 12“ 045 284 1 set 9 048 819 20 setsQuadro IW 20 Silent System/300 11 3/4“ 12 1/4“ 12 3/8“ 12 3/4“ 045 285 1 set 9 048 823 20 setsQuadro IW 20 Silent System/320 12 9/16“ 13 1/16“ 13 3/16“ 13 9/16“ 045 286 1 set 9 048 824 20 setsQuadro IW 20 Silent System/350 13 3/4“ 14 1/4“ 14 3/8“ 14 3/4“ 045 287 1 set 9 048 826 20 setsQuadro IW 20 Silent System/380 14 15/16“ 15 7/16“ 15 9/16“ 15 15/16“ 045 288 1 set 9 048 827 20 setsQuadro IW 20 Silent System/400 15 3/4“ 16 1/4“ 16 3/8“ 16 3/4“ 045 289 1 set 9 048 828 20 setsQuadro IW 20 Silent System/420 16 1/2“ 17“ 17 1/8“ 17 1/2“ 045 290 1 set 9 048 829 20 setsQuadro IW 20 Silent System/450 17 11/16“ 18 3/16“ 18 5/16“ 18 11/16“ 045 291 1 set 9 048 830 20 setsQuadro IW 20 Silent System/480 18 7/8“ 19 3/8“ 19 1/2“ 19 7/8“ 045 292 1 set 9 048 831 20 setsQuadro IW 20 Silent System/500 19 11/16“ 20 3/16“ 20 5/16“ 20 11/16“ 045 293 1 set 9 048 832 20 setsQuadro IW 20 Silent System/520 20 15/32“ 21“ 21 1/16“ 21 7/16“ 045 294 1 set 9 048 833 20 setsQuadro IW 20 Silent System/550 21 5/8“ 22 1/8“ 22 1/4“ 22 5/8“ 045 295 1 set 9 048 834 20 setsQuadro IW 20 Silent System/580 22 13/16“ 23 5/16“ 23 7/16“ 23 13/16“ 045 296 1 set 9 048 835 20 setsQuadro IW 20 Silent System/600 23 5/8“ 24 1/8“ 24 1/4“ 24 5/8“ 045 297 1 set 9 048 836 20 sets
Outside drawer box widthFor box thickness Deduct from inside cabinet width
1/2“ 9/16“5/8“ 5/16“
Euro screwcountersunk
KAT_133_142_G5_USA.qxd 01.02.2006 18:59 Uhr Seite 140
10
11
ø6
3732
1609
6
9
3732
22496 9
3732
22496 9
3732
22496 9
3732
19296 9
3732
19296 9
3732
19296 9
Quadro IW20 Silent System/280 (111/32”)
Quadro IW20 Silent System/420 (1617/32”)
Quadro IW20 Silent System/400 (153/4”)
Quadro IW20 Silent System/380 (1415/16”)
Quadro IW20 Silent System/350 (133/4”)
Quadro IW20 Silent System/320 (129/16”)
Quadro IW20 Silent System/300 (1125/32”)
141
Hole pattern for Quadro IW 20 Silent SystemNominal length 280 – 420 mm (11 1/32“ - 16 17/32“)
Drawings show a 3-sided box. When using a typical 4-sided box, please shift the track back into the cabinet the same dimension as the box material thickness.
Min. cabinet depth
Min. cabinet depth
Min. cabinet depth
Min. cabinet depth
Min. cabinet depth
Min. cabinet depth
Min. cabinet depth
Cabinet front edgeDrawer length
KAT_133_142_G5_USA.qxd 01.02.2006 18:59 Uhr Seite 141
3732
35296 9
3732
35296 9
3732
28896 9
3732
28896 9
3732
28896 9
3732
25696 9
3732
25696 9
Quadro IW20 Silent System/600 (235/8”)
Quadro IW20 Silent System/580 (2213/16”)
Quadro IW20 Silent System/550 (215/8”)
Quadro IW20 Silent System/520 (2015/32”)
Quadro IW20 Silent System/500 (1911/16”)
Quadro IW20 Silent System/480 (187/8”)
Quadro IW20 Silent System/450 (1711/16”)
142
Min. cabinet depth
Min. cabinet depth
Min. cabinet depth
Min. cabinet depth
Min. cabinet depth
Min. cabinet depth
Min. cabinet depth
Drawer length
Hole pattern for Quadro IW 20 Silent SystemNominal length 450 – 600 mm (17 11/16“ - 23 5/8“)
Drawings show a 3-sided box. When using a typical 4-sided box, please shift the track back into the cabinet the same dimension as the box material thickness.
KAT_133_142_G5_USA.qxd 01.02.2006 18:59 Uhr Seite 142
143
MultiTechSteel drawer system
KAT_143_160_G5_USA.qxd 01.02.2006 19:10 Uhr Seite 143
Special drawer height for us under the hob.
Inside drawers – extremely practical behind front panels.
144
MultiTech
. . . an impressive product range with a price/performance ratio tailored to your customer base
A choice of intelligent accessoriesto enhance any MultiTech drawer
system and fit for your application– in kitchens or living areas.
Partial and full extension runners for up to 100 lbs K.C.M.A. total load – for smoothservice every day, year after year.
KAT_143_160_G5_USA.qxd 01.02.2006 19:11 Uhr Seite 144
145
Contemporary design with a generouschoice of five drawer heights, for theperfect storage solution.
Good looks, wide , choice , top quality
KAT_143_160_G5_USA.qxd 01.02.2006 19:12 Uhr Seite 145
146
End-user benefits typical of up-market drawer systems
The free-spinning rollers are quiet,require no maintenance and run trueeven under heavy loads.
The self-closing feature closes front panels flush against the unit.The perfect parallel drawer actionallows elegant hairline reveals.
Full extension pan drawers open and close smoothly thanks to easyroller action.
Double-stop detent for safe routine handling. Can also be used to hold an open drawer securely in position.
High drawer sides forplenty of storage space
KAT_143_160_G5_USA.qxd 01.02.2006 19:12 Uhr Seite 146
147
MultiTech
. . . all the way to final assembly
Simple 3-dimensional front panel adjustment (± 2 mm cam height adjustment,
± 1,5 mm side adjustment, front panel angel via railing).Side panel leaves factory in zero position.
Fast front panel assembly using left/right-compatible front connectors(separate left/right connectors forinside pan drawers).
± 2 mm ± 1,5 mm
Drawers are easy to insert and remove.
± 2 mm ± 1,5 mmclick
KAT_143_160_G5_USA.qxd 01.02.2006 19:12 Uhr Seite 147
Industrial packing
Industrial packing
Drawer set contains:Drawer profile left/right �Drawer slide left/right �
148
MultiTech 54Steel profile system for variable drawer widthswith self closing
System benefits
• 2 1/8” (54 mm) height• Variable drawer width• 6 lengths: 10”/14”/16”/18”/20”/22”• Partial extension• Load capacity 100 lbs K.C.M.A.
� Drawer profile� Drawer slide� Front connector right� Front connector left
�
�
�
�
� Drawer profilepowder-coated steel, white
Length Order no. PUinch/mm left right
10”/250 9 050 660 9 050 661 2514”/350 9 050 662 9 050 663 2516”/400 9 050 664 9 050 665 2518”/450 9 050 666 9 050 667 2520”/500 9 050 668 9 050 669 2522”/550 9 050 670 9 050 671 25
Article Order no. PU
Front connector, screw-on left 1 064 336 100Front connector, screw-on right 1 064 341 100
� Drawer slidepowder-coated steel, white
� Front connector, screw-onnickel-plated die cast zinc
Rear mounting bracket for face frame cabinetsplastic
Distributor packing
Length Order no. PUinch/mm left right
10”/250 9 050 685 9 050 686 10014”/350 9 050 687 9 050 688 10016”/400 9 050 689 9 050 690 10018”/450 9 050 691 9 050 692 10020”/500 9 050 693 9 050 694 10022”/550 9 050 695 9 050 696 100
Drawer set, height 2 1/8” (54 mm), whitepartial extension
Article Order no. PU
Front connector, screw-on left / right 079 174 10 sets
Article Order no. PU
Front connector, knock-in left 1 064 578 100Front connector, knock-in right 1 064 579 100
� Front connector, knock-innickel-plated die cast zinc
Distributor packing
Article Order no. PU
Front connector, knock-in left / right 079 173 10 sets
Length Order no. PUinch/mm
10”/250 050 001 10 sets14”/350 050 003 10 sets16”/400 050 005 10 sets18”/450 050 007 10 sets20”/500 050 009 10 sets22”/550 050 011 10 sets
��
Article Order no. PU
Rear mounting bracket left 052 101 600Rear mounting bracket right 052 102 600
Recommended screw no. 6
KAT_143_160_G5_USA.qxd 03.02.2006 13:24 Uhr Seite 148
Drawer front panel
32
149
Mounting example for partial extension
Front connector drilling position
Dimensions
12,5
8,5
8,5
32
ø10 ±0,1
ø10 ±0,1
Wooden back panel = inside cabinet width - 32
Bottom panel depth =nominal length - 3
Inside cabinet width
Bottom panelwidth = insidecabinet width - 32
Wooden back panel = 39
16 ±1 15
9
18,5
12
49
min. 24
min. 5
16
3954
64
Chipboard screw ø 3,5
Wooden back panel
Pan-head screwø 4,5 x 12
Pan-head screwø 4,5 x 12
Inside cabinet width
Euro screw countersunk
Bottom panel width + 14
KAT_143_160_G5_USA.qxd 01.02.2006 19:12 Uhr Seite 149
Drawer set, height 33/8” (86 mm), white
Drawer set contains:� Drawer profile left/right� Drawer slide left/right, only with partial extension set� Drawer slide, middle profile and pullout prevention,
only with full extension set
150
MultiTech 86Steel profile system for variable drawer widthswith self closing
System benefits
• 33/8” (86 mm) height• 6 lengths: 10”/14”/16”/18”/20”/22”• Partial extension and full extension• Load capacity 100 lbs K.C.M.A.
� Drawer profile� Drawer slide� Front connector right� Front connector left� Drawer slide, middle profile
and pullout prevention
� Drawer profilepowder-coated steel, white
Length Order no. PUinch/mm left right
10”/250 9 050 619 9 050 620 2514”/350 9 050 623 9 050 624 2516”/400 9 050 627 9 050 628 2518”/450 9 050 631 9 050 632 2520”/500 9 050 635 9 050 636 2522”/550 9 050 639 9 050 640 25
Length Order no. PU Order no. PUinch/mm partial extension full extension
10”/250 050 013 10 sets –14”/350 050 015 10 sets –16”/400 050 017 10 sets 051 401 6 sets18”/450 050 019 10 sets 051 403 6 sets20”/500 050 021 10 sets 051 405 6 sets22”/550 050 023 10 sets 051 407 6 sets
� Drawer slide, partial extensionpowder-coated steel, white
� Front connector, screw-onnickel-plated steel
Distributor packing
Industrial packing
Industrial packing
Length Order no. PUinch/mm left right
10”/250 9 050 685 9 050 686 10014”/350 9 050 687 9 050 688 10016”/400 9 050 689 9 050 690 10018”/450 9 050 691 9 050 692 10020”/500 9 050 693 9 050 694 10022”/550 9 050 695 9 050 696 100
Article Order no. PU
Front connector, screw-on left / right 054 997 20
Article Order no. PU
Front connector, screw-on left / right 9 052 273 200
� Front connector, knock-innickel-plated steel
Distributor packing
Article Order no. PU
Front connector, knock-in left / right 054 998 20
Article Order no. PU
Front connector, knock-in left / right 9052 275 200
Corner connector for internal drawerwhite plastic
�
�
�
�
�
�
�
Rear mounting bracket for face frame cabinetsplastic
Article Order no. PU
Rear mounting bracket left 052 101 600Rear mounting bracket right 052 102 600
Recommended screw no. 6
Article Order no. PU
Corner connector for internal drawerleft / right 051 487 10 sets
KAT_143_160_G5_USA.qxd 03.02.2006 14:50 Uhr Seite 150
64
X
61
Bottom panelwidth = insidecabinet width - 32
Wooden back panel = 71
Wooden back panel =inside cabinet width - 32
Wooden front panel =inside cabinet width - 58
Bottom panel depth =nominal length - 19
71
Inside cabinet width
15
8671
16
18,5
32
min.5
81
min. 249
16±1
Chipboard screw ø 3,5
Pan-head screwø 4,5 x 12
Pan-head screwø 4,5 x 12
Inside cabinet width
Euro screw countersunk
Woodenback panel
15
8671
16
18,5
32
min.5
49
9
16±1
min. 56
Chipboard screw ø 3,5
Pan-head screwø 4,5 x 12
Pan-head screwø 4,5 x 12
Inside cabinet width
Euro screw countersunk
Woodenback panel
18 86
9
71
34,5
Partial extension Full extension
Countersunk screw ø 3,5
151
Mounting example for partial extension
Dimensions drawer
Mounting example for full extension
Mounting example for inside drawer
Bottom panel width = insidecabinet width - 32
Wooden back panel = 71
Wooden back panel = inside cabinet width - 32
Bottom panel depth= nominal length - 3
Inside cabinet width
Front connector drilling position
8,5
64
8,5
12,5
ø10±0,1
ø10±0,1
Dimensions inside drawer
64
Drawer front panel
Bottom panel width + 14
KAT_143_160_G5_USA.qxd 01.02.2006 19:12 Uhr Seite 151
152
Drawer set, height 4 5/8” (118 mm), white
Drawer set contains:� Drawer profile left/right� Drawer slide left/right, only with partial extension set� Drawer slide, middle profile and pullout prevention,
only with full extension set
MultiTech 118Steel profile system for variable drawer widthswith self closing
System benefits
• 4 5/8” (118 mm) height• 6 lengths: 10”/14”/16”/18”/20”/22”• Partial extension and full extension• Load capacity 100 lbs K.C.M.A.
� Drawer profile� Drawer slide� Front connector right� Front connector left� Drawer slide, middle profile
and pullout prevention
� Drawer profilepowder-coated steel, white
Length Order no. PUinch/mm left right
10”/250 9 050 750 9 050 739 2514”/350 9 050 754 9 050 753 2516”/400 9 050 760 9 050 759 2518”/450 9 050 764 9 050 763 2520”/500 9 050 768 9 050 767 2522”/550 9 050 770 9 050 769 25
Length Order no. PU Order no. PUinch/mm partial extension full extension
10”/250 050 033 10 sets –14”/350 050 035 10 sets –16”/400 050 037 10 sets 051 417 6 sets18”/450 050 039 10 sets 051 419 6 sets20”/500 050 041 10 sets 051 421 6 sets22”/550 050 043 10 sets 051 423 6 sets
� Drawer slide, partial extensionpowder-coated steel, white
� Front connector, screw-onnickel-plated steel
Length Order no. PUinch/mm left right
10”/250 9 050 685 9 050 686 10014”/350 9 050 687 9 050 688 10016”/400 9 050 689 9 050 690 10018”/450 9 050 691 9 050 692 10020”/500 9 050 693 9 050 694 10022”/550 9 050 695 9 050 696 100
� Front connector, knock-innickel-plated steel
�
�
�
�
�
�
�
Distributor packing
Industrial packing
Industrial packing
Article Order no. PU
Front connector, screw-on left / right 054 997 20
Article Order no. PU
Front connector, screw-on left / right 9 052 273 200
Distributor packing
Article Order no. PU
Front connector, knock-in left / right 054 998 20
Article Order no. PU
Front connector, knock-in left / right 9052 275 200
Rear mounting bracket for face frame cabinetsplastic
Article Order no. PU
Rear mounting bracket left 052 101 600Rear mounting bracket right 052 102 600
Recommended screw no. 6
KAT_143_160_G5_USA.qxd 03.02.2006 13:26 Uhr Seite 152
153
64
X
103
16
18,5
64
min.5
113
min. 249
1516±1
118
Chipboard screw ø 3,5
Pan-head screwø 4,5 x 12
Pan-head screwø 4,5 x 12
Inside cabinet width
Euro screw countersunk
Woodenback panel
103
16
18,5
64
min.5
81
9
1516 ±1
118
min. 56
Chipboard screw ø 3,5
Pan-head screwø 4,5 x 12
Pan-head screwø 4,5 x 12
Inside cabinet width
Euro screw countersunk
Woodenback panel
Mounting example for partial extension
DimensionsMounting example for full extension
Front connector drilling position
8,5
64
40,5
12,5
ø10 ±0,1
ø10 ±0,1
Wooden back panel = inside cabinet width - 32
Bottom panel depth= nominal length - 3
Inside cabinet width
Bottom panelwidth = insidecabinet width - 32
Wooden back panel = 103
64
Drawer front panel
Bottom panel width + 14
KAT_143_160_G5_USA.qxd 01.02.2006 19:12 Uhr Seite 153
154
Drawer set, height 6” (150 mm), white
Drawer set contains:� Drawer profile left/right� Drawer slide left/right, only with partial extension set� Drawer slide, middle profile and pullout prevention,
only with full extension set
MultiTech 150Steel profile system for variable drawer widthswith self closing
System benefits
• 6” (150 mm) height• 6 lengths: 10”/14”/16”/18”/20”/22”• Partial extension and full extension• Load capacity 100 lbs K.C.M.A.
� Drawer profile� Drawer slide� Front connector right� Front connector left� Drawer slide, middle profile
and pullout prevention
� Drawer profilepowder-coated steel, white
Length Order no. PUinch/mm left right
10”/250 9 050 709 9 050 710 2514”/350 9 050 711 9 050 712 2516”/400 9 050 713 9 050 714 2518”/450 9 050 715 9 050 716 2520”/500 9 050 717 9 050 718 2522”/550 9 050 719 9 050 720 25
Length Order no. PU Order no. PUinch/mm partial extension full extension
10”/250 050 053 10 sets –14”/350 050 055 10 sets –16”/400 050 057 10 sets 051 433 6 sets18”/450 050 059 10 sets 051 435 6 sets20”/500 050 061 10 sets 051 437 6 sets22”/550 050 063 10 sets 051 439 6 sets
� Drawer slide, partial extensionpowder-coated steel, white
� Front connector, screw-onnickel-plated steel
Length Order no. PUinch/mm left right
10”/250 9 050 685 9 050 686 10014”/350 9 050 687 9 050 688 10016”/400 9 050 689 9 050 690 10018”/450 9 050 691 9 050 692 10020”/500 9 050 693 9 050 694 10022”/550 9 050 695 9 050 696 100
� Front connector, knock-innickel-plated steel
�
�
�
�
�
�
�
Distributor packing
Industrial packing
Industrial packing
Article Order no. PU
Front connector, screw-on left / right 054 997 20
Article Order no. PU
Front connector, screw-on left / right 9 052 273 200
Distributor packing
Article Order no. PU
Front connector, knock-in left / right 054 998 20
Article Order no. PU
Front connector, knock-in left / right 9052 275 200
Rear mounting bracket for face frame cabinetsplastic
Article Order no. PU
Rear mounting bracket left 052 101 600Rear mounting bracket right 052 102 600
Recommended screw no. 6
KAT_143_160_G5_USA.qxd 03.02.2006 14:50 Uhr Seite 154
155
64
X
150135
16
min. 5
96
18,5
9
1516 ±1
min. 24
145
Chipboard screw ø 3,5
Pan-head screwø 4,5 x 12
Pan-head screw ø 4,5 x 12
Inside cabinet width
Euro screw countersunk
Woodenback panel
150135
16
113
min. 5
96
18,5
9
1516 ±1
min. 56
Chipboard screw ø 3,5
Pan-head screw ø 4,5 x 12
Pan-head screw ø 4,5 x 12
Inside cabinet width
Euro screw countersunk
Woodenback panel
Mounting example for partial extension
Dimensions Mounting example for full extension
Front connector drilling position
12,5
8,5
64
72,5
ø10 ±0,1
ø10 ±0,1
Wooden back panel = inside cabinet width - 32
Bottom panel depth= nominal length - 3
Inside cabinet width
Bottom panelwidth = insidecabinet width - 32
Wooden back panel= 135
64
Drawer front panel
Bottom panel width + 14
KAT_143_160_G5_USA.qxd 01.02.2006 19:12 Uhr Seite 155
156
Drawer set, height 8 3/8” (214 mm), white
Drawer set contains:� Drawer profile left/right� Drawer slide left/right, only with partial extension set� Drawer slide, middle profile and pullout prevention,
only with full extension set
MultiTech 214Steel profile system for variable drawer widthswith self closing
System benefits
• 8 3/8” (214 mm) height• 4 lengths: 16”/18”/20”/22”• Partial extension and full extension• Load capacity 100 lbs K.C.M.A.
� Drawer profile� Drawer slide� Front connector right� Front connector left� Drawer slide, middle profile
and pullout prevention
� Drawer profilepowder-coated steel, white
Length Order no. PUinch/mm left right
16”/400 9 054 921 9 054 922 1018”/450 9 054 923 9 054 926 1020”/500 9 054 927 9 054 928 10
Length Order no. PU Order no. PUinch/mm partial extension full extension
16”/400 051 449 10 sets 051 465 6 sets18”/450 051 451 10 sets 051 467 6 sets20”/500 051 453 10 sets 051 469 6 sets22”/550 051 455 10 sets 051 471 6 sets
� Drawer slide, partial extensionpowder-coated steel, white
� Front connector, screw-onnickel-plated steel
Length Order no. PUinch/mm left right
16”/400 9 050 689 9 050 690 10018”/450 9 050 691 9 050 692 10020”/500 9 050 693 9 050 694 100
� Front connector, knock-innickel-plated steel
�
��
��
�
�
Distributor packing
Industrial packing
Industrial packing
Article Order no. PU
Front connector, screw-on left / right 054 997 20
Article Order no. PU
Front connector, screw-on left / right 9 052 273 200
Distributor packing
Article Order no. PU
Front connector, knock-in left / right 054 998 20
Article Order no. PU
Front connector, knock-in left / right 9052 275 200
Rear mounting bracket for face frame cabinetsplastic
Article Order no. PU
Rear mounting bracket left 052 101 600Rear mounting bracket right 052 102 600
Recommended screw no. 6
KAT_143_160_G5_USA.qxd 03.02.2006 13:29 Uhr Seite 156
157
199
16
209
min. 5
160
18,5
9
1516 ±1
96
min. 24
Chipboard screw ø 3,5
Pan-head screwø 4,5 x 12
Pan-head screw ø 4,5 x 12
Inside cabinet width
Euro screw countersunk
214
199
16
177
min. 5
160
18,5
9
1516 ±1
min. 56
96
Chipboard screw ø 3,5
Pan-head screwø 4,5 x 12
Pan-head screw ø 4,5 x 12
Inside cabinet width
Euro screw countersunk
Mounting example for partial extension
Dimensions
Mounting example for full extension
Front connector drilling position
12,5
8,5
64
136,5
ø10 ±0,1
ø10 ±0,1
64
Wooden back panel = inside cabinet width - 32
Bottom panel depth= nominal length - 3
Inside cabinet width
Bottom panelwidth = insidecabinet width - 32
Wooden back panel= 199
64
Drawer front panel
Bottom panel width + 14
KAT_143_160_G5_USA.qxd 01.02.2006 19:12 Uhr Seite 157
158
MultiTechPot-and-pan drawerSteel profile system for variable drawer widths
Railing for pot-and-pan drawerwhite
Length Order no. PUinch/mm left right
18”/400 1 064 372 1 064 377 10020”/450 1 064 375 1 064 378 10022”/500 1 064 376 1 064 379 100
Front connector for railingpremounted knock-in screw,clear plastic
Article Order no. PU
Front connector for railing 1 061 965 400
System benefits
• 2 1/8” (54 mm), 3 3/8” (86 mm), 4 5/8” (118 mm), 6” (150 mm) or 8 3/8” (214 mm) drawers can be expanded to pot-and-pan drawers with a railing set
• Steel profile with roller runners as partial extension slide or full extension slide with self-closing feature
• Load capacity 100 lbs K.C.M.A.• 3 nominal drawer lengths: 18”/20”/22” (450/500/550 mm)• Finish: white• Variable pot-and-pan drawer widths• Quick drawer insertion and removal• Simple assembly and front panel adjustment• One-sided constrained guidance
The following components are all you need for assembling a MultiTech pot-and-pan drawer:
Distributor packing
• Drawer set, full extension slide orpartial extension slide+ Front connectors(see page 148 to 157)
• Railing set (see below)
Industrial packing� Drawer profile left / right� Drawer slide left / right� Front connector right� Front connector left� Railing for pot-and-pan drawer� Front connector for railing
Industrial packing
Industrial packing
Railing-Set for pot-and-pan drawerwhite
contains:� Railing for pot-and-pan drawer� Front connector for railing
Distributor packing
Article Order no. PU
Railing-Set 450 mm 051 481 10 setsRailing-Set 500 mm 051 483 10 setsRailing-Set 550 mm 051 485 10 sets
�
�
�
�
�
�
�
Rear mounting bracket for face frame cabinetsplastic
Article Order no. PU
Rear mounting bracket left 052 101 600Rear mounting bracket right 052 102 600
Recommended screw no. 6
�
�
KAT_143_160_G5_USA.qxd 03.02.2006 13:30 Uhr Seite 158
159
9
18,5
32
16
12,5
Mounting example Front connector/railing drilling position
12,5
8,5
ø10 ±0,1
ø10 ±0,1
ø10 ±0,1
6,5
Y
Y = Back panel height +bottom panel thickness – 6,5 mm
KAT_143_160_G5_USA.qxd 01.02.2006 19:13 Uhr Seite 159
160
MultiTech Accessories
Article Order no. PU
Practica universal angle stop 078 093 1
Article Order no. PU
Practica drilling template 079 637 1
Article Order no. PU
Sleeve drill ø 10 mm 078 096 1Spare drill ø 10 mm 079 005 1
Article Order no. PU
Insertion die for MultiTech 54 079 566 1MultiTech 86/118/150 and 214 040 129 1
Rear Mounting Bracket forMultiTechThe rear mounting bracket is especially designed for face frame construction as well as applications not using a full center panel.Positive fit between slide and bracket eliminates "twist-out" between parts.Interference between bracket and drawer box impossible.Elongated slots provide both horizontal and vertical adjustment.Attachment can be by screw or staples.Min. support 30 mm, max. support 86 mm.
Marking gauge Practica for MultiTech drawers/pot-and-pan drawerThe MultiTech front panel gauge (universal angle stop and drillingtemplate) makes it easy to drill holes in any required position for fixing the front panel to the drawer/pot-and-pan drawer.
Article Finish Order no. PU
Assembly jig blue 064 820 1
Article Order no. PU
Mounting tool for MultiTech 54 079 564 1MultiTech 86/118/150 and 214 040 133 1
Assembly jigfor simple, fast and precise assembly of MultiTech cabinet runners
Insertion die for front connectorsfor Blue Max mini and Blue Max 6/8/19
Mounting toolfor knock-in assembly of front connectors
Article Finish Order no. PU
Rear mounting bracket left plastic 052 101 600Rear mounting bracket right plastic 052 102 600
Recommended screw no. 6
KAT_143_160_G5_USA.qxd 01.02.2006 19:13 Uhr Seite 160
Roller runnersystems FR
161
KAT_161_172_G5_USA.qxd 01.02.2006 19:15 Uhr Seite 161
162
Roller runner system FR 302 with one-sided captive guide rail for screw-on assembly
• 5 runner lengths 300 - 500 mm• Finish: white• Load capacity 55 lbs K.C.M.A.• One-sided captive guide rail, automatic tolerance compensation ±1 mm• Integrated self-closing feature, double STOP and roll-out prevention• Noise-absorbing plastic rollers, bushed bearings
Steel runners, epoxy-coated white
Article / Nominal length Order no. PU Drawer length Min. cabinet depth Extension lossmm mm mm mm
FR 302/300 9 002 570 100 sets 300 303 69
FR 302/350 9 002 583 100 sets 350 353 69
FR 302/400 9 002 584 100 sets 400 403 69
FR 302/450 9 002 585 100 sets 450 453 79
FR 302/500 9 002 586 100 sets 500 503 86
12,5 ±1
16 11
12,5
32
64
16
Assembly
Chipboard screw ø 3,5
Article Order no. PU
ø 6,3 x10,5 051 264 200ø6,3 x14 051 265 200
Countersunk Euro screw
Euro screw countersunk
Drawer removal
* Runner width 12 mmInstallation width 12,5 mm for tolerance compensation
�
�
Assembly jig, see page 166For face frame cabinets use rear bracket 052 101/052 102, see page 166
KAT_161_172_G5_USA.qxd 01.02.2006 19:15 Uhr Seite 162
300
350
400
450
500
2
35 32
916
9
37 128 9628
2
69 16
9
37 128 96
69
2864
2
16
9
37 128 9628
128
2
69 16
9
37 128 9628
128 32
2
79 16
37 128 96
86
28128 64 32
FR 302/300
FR 302/350
FR 302/400
FR 302/450
FR 302/500 Min. cabinet depth*
Min. cabinet depth*
Min. cabinet depth*
Min. cabinet depth*
* Min. cabinet depth = drawer length + 3
Min. cabinet depth*
Drawer length
Drawer length
Drawer length
Drawer length
Drawer length
163
10
35 32
411,5
13,2
30
50
Hole position for drawers (mm)
Cabinet front edge
Integrated double STOPCabinet requirements
Cabinet front edge
min. 3,5
min. 2,5
up to 20
Cabinet front edge
KAT_161_172_G5_USA.qxd 01.02.2006 19:15 Uhr Seite 163
164
12,5 ±1
16 11
12,5
32
64
16
Assembly jig, see page 166For face frame cabinets use rear bracket 052 101/052 102, see page 166
Roller runner system FR 402 with one-sided captive guide rail for screw-on assembly
• 7 runner lengths 300 – 600 mm• Finish: white• Load capacity 100 lbs K.C.M.A.• One-sided captive guide rail, automatic tolerance compensation ±1 mm• Integrated self-closing feature, double STOP and roll-out prevention• Noise-absorbing plastic rollers, bushed bearings
Assembly
Other colours available on request
Article / Nominal length Order no. PU Drawer length Min. cabinet depth Extension lossmm mm mm mm
FR 402/300 1 056 053 100 sets 300 303 69
FR 402/350 1 074 665 100 sets 350 353 69
FR 402/400 1 056 063 100 sets 400 403 69
FR 402/450 1 056 068 100 sets 450 453 79
FR 402/500 1 056 073 100 sets 500 503 86
FR 402/550 1 056 079 100 sets 550 553 94
FR 402/600 1 056 084 100 sets 600 603 104
Chipboard screw ø 3,5
Article Order no. PU
ø 6,3 x10,5 1 008 302 1000ø6,3 x14 1 008 313 1000
Countersunk Euro screw
Euro screw countersunk
Drawer removal
* Runner width 12 mmInstallation width 12,5 mm for tolerance compensation
�
�
KAT_161_172_G5_USA.qxd 01.02.2006 19:15 Uhr Seite 164
165
30
50
300
350
400
450
500
550
600
2
35 32
916
9
37 128 9628
2
69 16
9
37 128 96
69
2864
2
16
9
37 128 9628
128
2
69 16
9
37 128 9628
128 32
2
79 16
37 128 96
86
28128 64 32
9
37 128 96
94
28128 128
2
16
9
37 128 96
104
28128 128
2
16
FR 402/300
FR 402/350
FR 402/400
FR 402/450
FR 402/500
FR 402/550
FR 402/600
Integrated double STOPCabinet requirements Cabinet front edge
min. 2,5
up to 20
Hole position for drawers (mm)
Min. cabinet depth*
Min. cabinet depth*
Min. cabinet depth*
Min. cabinet depth*
Min. cabinet depth*
* Min. cabinet depth = drawer length + 3
Min. cabinet depth*
Drawer length
Drawer length
Drawer length
Drawer length
Drawer length
Drawer length
Drawer lengthMin. cabinet depth*
Cabinet front edge
10
35 32
411,5
13,2
Cabinet front edge
KAT_161_172_G5_USA.qxd 01.02.2006 19:15 Uhr Seite 165
166
Accessories and assembly jigfor roller runners FR 302/402
Rear Mounting Bracket forFR 302/402 roller runnersThe rear mounting bracket is especially designed for face frame construction as well as applications not using a full center panel.Positive fit between slide and bracket eliminates "twist-out" between parts.Interference between bracket and drawer box impossible.Elongated slots provide both horizontal and vertical adjustment.Attachment can be by screw or staples.Min. support 30 mm, max. support 86 mm.
Article Finish Order no. PU
Rear mounting bracket left plastic 052 101 600Rear mounting bracket right plastic 052 102 600
Recommended screw no. 6
Assembly jig
For simple, fast and precise assembly of FR 302/402 roller runners.
Material: blue plastic
Article Order no. PU
Assembly jig 064 820 1
KAT_161_172_G5_USA.qxd 01.02.2006 19:15 Uhr Seite 166
11,5
5
12,5 +1
43
12,5 +1
6,5
32
64
• 5 runner lengths 350 – 550 mm• Finish: white• Load capacity: 100 lbs K.C.M.A.• Two-sided captive guide rail, automatic tolerance compensation
± 0,5 mm• Support angle, safety catch and lockable telescopic centre runner• Noise-absorbing plastic rollers, bushed bearings
Safety catch
Epoxy-coated white steel runners
Chipboard screw ø 3,5Euro screw
countersunk
* Runner width 12 mmInstallation width 12,5 mm for tolerance compensation
The safety catch prevents the drawer being accidentally detached from the runners. It is an essential safety feature for over-extension runners.If the centre runner is not moving smoothly, pulling the drawer to its full extension and thenclosing it will correct the problem. The centre runner is fixed when the drawer isextended.
Article Order no. PUø 6,3 x10,5 1 008 302 1000ø6,3 x14 1 008 313 1000
Countersunk Euro screw
Over extension FR 6142Roller runner system with self-closing feature, two-sided captive guide rail for screw-on assembly
Article / Nominal length Order no. PU Drawer length Min. cabinet depth Over extensionmm mm mm mm
FR 6142/350 041 637 10 sets 350 355 15
FR 6142/400 041 639 10 sets 400 405 30
FR 6142/450 041 641 10 sets 450 455 30
FR 6142/500 041 643 10 sets 500 505 30
FR 6142/550 041 645 10 sets 550 555 30
167
KAT_161_172_G5_USA.qxd 01.02.2006 19:15 Uhr Seite 167
168
FR 6142 550
FR 6142 500
FR 6142 450
FR 6142 350
FR 6142 400
30 37 1282
96 128 128
30 371282 96 128 64 32
30 371282 96 128
15 371282 96 64
30 371282 96 96
550
500
450
350
400
2
3
1
Hole position for drawers (mm)
Min. cabinet depth*
Min. cabinet depth*
Cabinet front edge
* Min. cabinet depth = drawer length + 5
Assembly
Min. cabinet depth*
Min. cabinet depth*
Drawer length
Drawer length
Drawer length
Drawer length
Drawer length
The runners have two sets of holes for offset screw positions in thin centre panels.
Min. cabinet depth*
Press safety catch into centre runner
Centre runner
�
�
�
KAT_161_172_G5_USA.qxd 01.02.2006 19:15 Uhr Seite 168
Ball-bearing slides KA
169
KAT_161_172_G5_USA.qxd 01.02.2006 0:59 Uhr Seite 169
170
45,8
12,7
Full extension ball bearing slide KA 5632 12,7 mm (1/2”) installation width, detachable
Article / Nominal length Drawer length Min. cabinet depth Order no. PU Order no. PUmm mm inch mm inch pair pair
KA 5632/250 250 10 254 10 1/4 1 071 891 10 073 276 1
KA 5632/300 300 12 304 12 1/4 1 071 893 10 073 277 1
KA 5632/350 350 14 354 14 1/4 1 071 894 10 073 278 1
KA 5632/400 400 16 404 16 1/4 1 071 895 10 073 279 1
KA 5632/450 450 18 454 18 1/4 1 071 896 10 073 280 1
KA 5632/500 500 20 504 20 1/4 1 071 897 10 073 281 1
KA 5632/550 550 22 554 22 1/4 1 071 898 10 073 282 1
KA 5632/600 600 24 604 24 1/4 1 071 899 10 073 283 1
KA 5632/650 650 26 654 26 1/4 1 071 900 10 073 284 1
KA 5632/700 700 28 704 28 1/4 9 019 660 10 041 355 1
Panhead screw ø4 [#8]
Panhead screw ø4 [#8]
Chipboard screw ø4 Euro screw countersunk
Assembly
�
�
�
�
�
�
• Full extension ball bearing slide KA 5632 with 12,7 mm (1/2”)installation width, in 10 lengths
• Telescopic precision full extension slide with pull-out stop and roll-out prevention
• For drawer lengths 250 to 700 mm (10” to 28”)• Chromated steel• Load capacity 100 lbs (45 kg)• Drawer can be unlatched from the runner, making the drawer easy
to remove and re-install.• Smooth action and high lateral stability due to precision
ball bearings
Article Order no. PUø 6,3 x10,5 1 008 302 1000ø6,3 x14 1 008 313 1000
Countersunk Euro screw
Order no. PU040 265 20
Rear metal bracket for rear attachment
Available in black on request
KAT_161_172_G5_USA.qxd 01.02.2006 0:59 Uhr Seite 170
171
49,7
12,7
Over extension ball bearing slide KA 4932 12,7 mm (1/2”) installation width, detachable
• Over extension ball bearing slide KA 4932 with 12,7 mm (1/2”)installation width, in 10 lengths
• Telescopic precision over extension slide with pull-out stop and roll-out prevention
• For drawer lengths 250 to 700 mm [10” to 28”]• Chromated steel• Load capacity 130 lbs (60 kg)• Drawer can be unlatched from the runner, making the drawer easy
to remove and re-install.• Smooth action and high lateral stability due to precision
ball bearings
Panhead screw ø4 [#8]
Panhead screw ø4 [#8]
Chipboard screw ø4 Euro screw countersunk
Mounting
�
�
�
�
�
�
Countersunk Euro screw
Article Order no. PU
ø 6,3 x10,5 1 008 302 1000ø6,3 x14 1 008 313 1000
Article / Nominal length Drawer length Min. cabinet depth Over extension Order no. PU Order no. PUmm mm inch mm inch mm inch pair pair
KA 4932/250 250 10 254 10 1/4 38 1 1/2 1 071 901 10 041 356 1
KA 4932/300 300 12 304 12 1/4 38 1 1/2 1 071 902 10 041 357 1
KA 4932/350 350 14 354 14 1/4 38 1 1/2 1 075 310 10 041 358 1
KA 4932/400 400 16 404 16 1/4 38 1 1/2 1 077 311 10 041 359 1
KA 4932/450 450 18 454 18 1/4 38 1 1/2 1 071 905 10 041 361 1
KA 4932/500 500 20 504 20 1/4 38 1 1/2 1 071 906 10 041 362 1
KA 4932/550 550 22 554 22 1/4 38 1 1/2 1 071 907 10 041 363 1
KA 4932/600 600 24 604 24 1/4 38 1 1/2 1 071 908 10 041 364 1
KA 4932/650 650 26 654 26 1/4 38 1 1/2 1 071 909 10 041 365 1
KA 4932/700 700 28 704 28 1/4 38 1 1/2 9 019 703 10 041 366 1
Available in black on request
KAT_161_172_G5_USA.qxd 01.02.2006 0:59 Uhr Seite 171
172
Article / Nominal length Drawer length Min. cabinet depth Order no. PU Order no. PUmm mm inch mm inch
KA 3320/310 310 12 312 12 1/4 073 287 1 set 9 020 128 5 setsKA 3320/360 360 14 362 14 1/4 073 288 1 set 9 020 129 5 setsKA 3320/410 410 16 412 16 1/4 073 289 1 set 9 020 130 5 setsKA 3320/460 460 18 463 18 1/4 073 290 1 set 9 020 131 5 setsKA 3320/510 510 20 512 20 1/4 073 291 1 set 9 020 132 5 setsKA 3320/560 560 22 563 22 1/4 073 292 1 set 9 020 133 5 setsKA 3320/610 610 24 614 24 1/4 073 293 1 set 9 020 134 5 setsKA 3320/660 660 26 664 26 1/4 073 294 1 set 9 020 135 5 setsKA 3320/710 710 28 715 28 1/4 073 295 1 set 9 020 136 5 setsKA 3320/760 760 30 766 30 1/4 073 296 1 set 9 020 137 5 setsKA 3320/810 810 32 815 32 1/4 041 367 1 set 9 020 138 3 setsKA 3320/860 860 34 865 34 1/4 041 368 1 set 9 020 139 3 setsKA 3320/910 910 36 915 36 1/4 041 369 1 set 9 020 140 3 setsKA 3320/1015 1015 40 1020 40 1/4 052 271 1 set – –KA 3320/1065 1065 42 1070 42 1/4 052 272 1 set – –KA 3320/1215 1215 48 1220 48 1/4 052 273 1 set – –KA 3320/1520 1520 60 1525 60 1/4 052 274 1 set – –
76
19±0,5
Panhead screw ø4,5Panhead screw ø4,5
Mounting
Note:The side must be fixed to thecabinet by screw fasteners inevery hole.
Chipboard screwChipboard screw
Full extension ball bearing slide KA 3320 19 mm (3/4”) installation width for high loads
• Full extension ball bearing slide KA 3320 with 19 mm (3/4”) -installation width, in 17 lengths
• Telescopic precision full extension slide for high loads with pull-outstop and roll-out prevention
• For drawer lengths 310 to 1520 mm• Chromated steel• Load capacity 300-500 lbs*• Smooth action and high lateral stability due to precision
ball bearings
* 300 lbs – 75 000 cycles, 500 lbs – 10 000 cycles
KAT_161_172_G5_USA.qxd 01.02.2006 0:59 Uhr Seite 172
Connectingfittings
173
KAT_173_186_G8_USA.qxd 01.02.2006 1:03 Uhr Seite 173
Cam fittings
• Double safety provided by interiorand exterior indentation.
• The dowel is always tightened centrally, thereby ruling out displacement of the furniture components!
• No more loosening due to vibration during transport.
• The indentations, both inside andout, prevent accidental loosening of the cam.
174
KAT_173_186_G8_USA.qxd 01.02.2006 1:06 Uhr Seite 174
175
Cam fitting Rastex 15
with torque support
Rastex 15 cam fitting with torque supportAll Rastex 15 versions are equipped with a torque support, whichallows panels to be up to 4 mm apart before tightening.� Double safety provided by interior and exterior indentation.
The dowel is always tightened centrally, thereby ruling out displacement of the furniture components!
� Cam can be tightened with a slot screwdriver or crosshead screwdriver PZ 3 or Allen key SW 4.
� Useable in 15 - 16 mm panels.� Die-cast zinc
Dowels / sockets - see pages 176-178
Cover caps, plastic for all RASTEX 15 versions
Finish Order no. PU
white 071 054 200brown 071 055 200black 079 490 200pine 079 491 200
Article Finish for 15-16 mm panels for 19 mm panels PUwithout rim with rim without rim with rim
Rastex 15 cam fitting self-colour 9 007 997 9 008 713 9 006 655 1 079 689 2000nickel-plated 9 003 948 9 003 954 9 013 163 1 030 986 2000
KAT_173_186_G8_USA.qxd 01.02.2006 1:07 Uhr Seite 175
176
34
ø811,5
ø5
30 11
30 8,5
24
ø89
ø5
34
ø89
ø5
24
ø811,5
ø5
20 11
20 8,5
ø5
ø5
ø5
ø5
ø8
ø8
11
DU 319/DU 320 can be used with…
Dowels / sockets for Rastex 15Hole diameter 5 and 8 mm
Hettich TwisterScrew-in dowel DU 319Euro screw thread for 5 mm hole diameter,dowel length 20 mmsteel self-colour / plastic green
Hettich TwisterScrew-in dowel DU 320Euro screw thread for 5 mm hole diameter,dowel length 30 mmsteel self-colour / plastic black
Hettich TwisterScrew-in dowel DU 243Euro screw thread for 5 mm hole diameter,dowel length 20 mmsteel self-colour / plastic green
Hettich TwisterScrew-in dowel DU 232Euro screw thread for 5 mm hole diameter,dowel length 30 mmsteel self-colour / plastic black
Socket no. 49with threaded sleeve for hole dia. 8 mmplastic
Article Order no. PU
Twister DU 319 9 047 974 2000
Article Order no. PU
Twister DU 320 9 047 976 2000
Article Order no. PU
Twister DU 243 9 047 862 2000
Article Order no. PU
Twister DU 232 9 047 644 2000
Finish Order no. PU
white 9 015 676 10 000
Mounting example Article
Drilling jig Accura for System 32 and dowel drilling - see page 12-17
KAT_173_186_G8_USA.qxd 01.02.2006 1:07 Uhr Seite 176
177
ø10
ø10
13
ø10
24
ø8 11,5
ø 8/10
34
ø8 11,5
ø 8/10
30 7,8
M6
20 7,8
M6
Mounting example Article
DU 645/DU 644 can be used with... Socket no. 100for thread M6 and 10 mm hole diameterplastic
Finish Order no. PU
white 1 005 074 5000
Hettich Twister / socket for Rastex 15Hole diameter 10 mm
Hettich Twister screw-in dowel DU 645Thread M6 x 7,8 mm,dowel length 20 mmsteel self-colour / plastic green
Hettich Twister screw-in dowel DU 644Thread M6 x 7,8 mm,dowel length 30 mmsteel self-colour / plastic black
Article Order no. PU
Twister DU 645 9 047 866 2000
Article Order no. PU
Twister DU 644 9 047 864 2000
ø10
ø10
ø10
KAT_173_186_G8_USA.qxd 01.02.2006 1:07 Uhr Seite 177
178
Hettich Rapid Fast - faster - Rapid S1. Fast– Push-fit – much faster than screw fixing.– The 8 mm dowel shank dispenses with the wood dowels previously required to
position the shelf. This shortens processing and installation times and reduces costs.2. Safe– The socket expands immediately when the eccentric cam is tightened and pull-out
strength is increased considerably.– The stop ring on top of the expanding socket ensures consistent insertion depth
and therefore correct dowel function.– Double safety and optimum firm seating of the fast assembly dowel in conjunction
with the interior and exterior indentations of the Rastex system.– Disassembly of the dowel is performed simply by hand - again, no tools are required.3. Comfortable– Toolless assembly dispenses with screw fixing in the dowel.
The dowel and expanding socket are simply pushed with the finger into the drilling hole.– The plastic dowel shank is easy to handle - insertion is performed easily by hand,
regardless of whether the furniture construction calls for one or a hundred dowels.
Fast assembly dowel Hettich Rapid S for Rastex 15Hole diameter 8 and 10 mm
Article Order no. PU
Rapid DU 324 9 046 180 2000
Article Order no. PU
Rapid DU 325 9 046 182 2000
Mounting example Article
10,520 ø8
Hettich Rapid SFast assembly dowel DU 324Expanding socket for 8 mm hole diameter,dowel length 20 mmdie-cast zinc / blue plastic
11
24
ø8 ø8
ø810,530
Hettich Rapid SFast assembly dowel DU 325Expanding socket for 8 mm hole diameter,dowel length 30 mmdie-cast zinc / blue plastic
11
34
ø8 ø8
Article Order no. PU
Rapid DU 332 9 046 184 2000
ø10
Hettich Rapid SFast assembly dowel DU 332Expanding socket for 10 mm hole diameter,dowel length 20 mmdie-cast zinc / green plastic
11
24
ø8ø10
10,520
Article Order no. PU
Rapid DU 333 9 046 186 2000
10,530 ø10
Hettich Rapid SFast assembly dowel DU 333Expanding socket for 10 mm hole diameter,dowel length 30 mmdie-cast zinc / green plastic
11
34
ø8ø10
KAT_173_186_G8_USA.qxd 01.02.2006 1:08 Uhr Seite 178
179
9,5
20
19 14
9,5
+0,5
12
Cam fitting VB 35� Decorative connecting fittings for positive connections
of panels and sides according to the tried and trusted eccentric latching principle.
� The fitting is pressed into a 20 mm dia. hole.The panel can be inserted from above or from the front.
� For bottom panels, the eccentric cam can be tightened also from above.For this purpose, a through hole in the shelf is required.
Drilling patternfor panels
Insert panel from above or the front
Dowel centre fromunderside of panel
Connecting fitting VB 35/19for 19 mm panels
Dowels / sockets - see pages 184-185
Article Finish Order no. PU
VB 35/19 white 1 019 479 1000plastic brown 1 019 480 1000
black 079 641 200
Cam fittingVB 35
KAT_173_186_G8_USA.qxd 01.02.2006 1:08 Uhr Seite 179
180
9,5
20
19 14
9,5
+0,5
12
Cam fittingVB 35 M
Cam fitting VB 35 M� Decorative connecting fittings for positive connections
of panels and sides according to the tried and trustedeccentric latching principle.
� The connecting fittings are equipped with a torque support which allows panels to be up to 2 mm apart before tightening.
� The fitting is pressed into a 20 mm dia. hole. The panel can be inserted from above.
� For bottom panels, the eccentric cam can be tightened also from above. For this purpose, a through hole in theshelf is required.
Fit shelf in positionfrom above.Mounting aid when hangingshelves.
Drilling pattern for panels
Dowel centre fromunderside of panel
Connecting fitting VB 35 M/19for 19 mm panels
Dowels / sockets - see pages 184-185
Article Finish Order no. PU
VB 35 M/19 white 1 019 473 1000plastic brown 1 019 474 1000
black 079 643 200
KAT_173_186_G8_USA.qxd 02.02.2006 19:59 Uhr Seite 180
181
9,5
12
10
9,5
20
32
1910,5 14
+0,5
Cam fittingVB 36
Insert panel from above orthe front
Cam fitting VB 36� Decorative connecting fittings for positive connections
of panels and sides according to the tried and trusted eccentric latching principle.
� The fitting is pressed into double holes with a drilling distance of 32 mm. 20 mm and 10 mm diameterinsertion drilling holes.The panel shelf can be inserted from above or from the front.
� For bottom panels, the eccentric cam can be tightened also from above. For this purpose, a through hole in the shelf is required.
Drilling patternfor panels
Dowel centre fromunderside of panel
Dowels / sockets - see pages 184-185
Article Finish Order no. PU
VB 36/19 white 1 019 487 500plastic brown 065 532 200
black 079 646 200almond 1 079 566 500
Connecting fitting VB 36/19for 19 mm panels
KAT_173_186_G8_USA.qxd 01.02.2006 2:21 Uhr Seite 181
182
8
+0,5
10 20
32
9,5
1610,5 12,5
12 12
10
9,5
20
32
1910,5 14
+0,5
9,5
Cam fittingVB 36 M
Fit shelf in positionfrom above.Mounting aid when hangingshelves.
Cam fitting VB 36 M� Decorative connecting fittings for positive connections
of panels and sides according to the tried and trusted eccentric latching principle.
� The connecting fittings are equipped with a torque support which allows panels to be up to 2 mm apart before tightening.
� The fitting is pressed into double holes with a drilling distance of 32 mm. 20 mm and 10 mm diameterinsertion drilling holes. The panel can be inserted from above.
� For bottom panels, the eccentric cam can be tightened also from above. For this purpose, a through hole in the shelf is required.
Dowels / sockets - see pages 184-185
Drilling patternfor panels
Dowel centre fromunderside of panel
Drilling patternfor panels
Dowel centre fromunderside of panel
Connecting fitting VB 36 M/16for 16 mm panels
Connecting fitting VB 36 M/19for 19 mm panels
Article Finish Order no. PU
VB 36 MD /16 nickel-plated 065 517 200die-cast zinc
VB 36 M /16 white 1 019 482 500plastic brown 1 019 483 500
black 079 647 200almond 1 076 883 500
Article Finish Order no. PU
VB 36 MD/19 nickel-plated 1 019 493 250die-cast zinc
VB 36 M /19 white 1 019 484 500plastic brown 1 019 693 500
black 079 648 200almond 9 000 239 500
KAT_173_186_G8_USA.qxd 01.02.2006 2:21 Uhr Seite 182
183
+0,5
8
20
9,5
16 12,5
Connecting fittingVB 135 for shelves
Fit shelf in positionfrom above.Mounting aid when hangingshelves.
Connecting fitting VB 135The connecting fitting VB 135 is pressed into a 20 mm dia. hole.The panel can only be inserted from above.The panel with the VB 135 is merely pressed on to the dowel. Via the wedge effect, the shelf is tightened on the side and safeguarded against accidental removal.Can be used with panels from 16 mm upwards.
Drilling patternfor panels
Dowel centre fromunderside of panel
Connecting fitting VB 135for panels from 16 mm
Article Finish Order no. PU
VB 135 plastic white 1 016 559 1000
brown 073 617 200black 079 649 200
Dowels / sockets - see pages 184-185
KAT_173_186_G8_USA.qxd 01.02.2006 2:21 Uhr Seite 183
184
6,7 12
6,7 12
6,7 7,8
M4
12,5
ø5
12,5
ø5
ø5
ø5
8
9M4
ø5
Mounting example Article
Dowels / sockets / endscrews for VB 35/35 M, VB 36/36 M, VB 135Hole diameter 5 mm
Finish Order no. PU
self-colour 1 019 686 4000
Finish Order no. PU
self-colour 064 880 200
Finish Order no. PU
self-colour 1 035 240 2000
Screw-in dowel DU 248Euro screw thread for 5 mm hole diameter,dowel length 6,7 mmdie-cast zinc
Knock-in dowel DU 728for 5 mm hole diameter,dowel length 6,7 mmsteel
Screw-in dowel DU 426Thread M4 x 7,8 mm, dowel length 6,7 mmsteel
DU 426 can be used with...
Finish Length Order no. PU
nickel-plated 8 mm 079 525 200nickel-plated 9 mm 079 527 200
End screwfor thread M4,for use with threaded sleeve M4steel
Hole diameter Order no. PU
5 mm 1 005 077 2000
Expanding socketfor thread M4 and 5 mm hole diameterbrass, self-colour
Drilling jig Accura for System 32 and dowel drilling- see page 12-17
8,5
ø5
ø5
7,8
ø5
11,5
ø5
6,7 11
3
Finish Order no. PU
zinc-plated 074 688 200
Screw-in dowel DU 279only for VB 35/36, with high collar, Euro screw thread for 5 mm hole diameter, dowel length 6,7 mmsteel
ø5
KAT_173_186_G8_USA.qxd 01.02.2006 2:21 Uhr Seite 184
185
12,5
ø8/
ø8/10
6,7 7,8
M6
Mounting example Article
Finish Order no. PU
self-colour 1 035 241 2000
Dowels / sockets for VB 35/35 M, VB 36/36 M, VB 135Hole diameter 5 and 8 mm
Screw-in dowel DU 648Thread M6 x 7,8 mm,dowel length 6,7 mmsteel
DU 648 can be used with...
Article Finish Order no. PU
Expanding socketwith nylon ball brass, self-colour 079 538 200
Expanding socket with nylon ballfor thread M6 and 8 mm hole diameterlength 12 mmbrass, self-colour
Drilling jig Accura for System 32 and dowel drilling - see page 12-17
ø5
16
ø5
19
ø5
ø5
22,8
25,8
Finish Order no. PU
nickel-plated 1 019 543 2000
Finish Order no. PU
nickel-plated 1 019 544 2000
End dowel DU 981for 16 mm side and 5 mm hole diameter, dowel length 22,8 mmsteel
End dowel DU 982for 19 mm side and 5 mm hole diameter,dowel length 25,8 mmsteel
ø8
12
ø8
KAT_173_186_G8_USA.qxd 01.02.2006 2:21 Uhr Seite 185
186
6
6
32
32
32
44
64
15
Multi-Clip
The clip connector for many different applications
Clip connector Multi-ClipA single plastic component, simple and easy to use!Multi-Clip is rectangular in shape and can be screwed in place from all sides. Fits easily into system 32 drilling.Multi-Clip locates by means of a flexible tongue. These tongues areserrated and slightly sprung in order to provide a firm location. Multi-Clip’s wide tolerance band provides significant adjustment after location.
Article Order no. PU
Multi-Clip 1 009 684 200
Made from heat-resistantthermoplastic
Mounting with 4 mm dia. countersunk screws
Multi-Clip is versatile in use:For wall panelling, plinths, fascia panels and cladding of all types.In all cases, the fitting can be screwed on parallel or at a right angle to the fascia or cladding component.If the clip connectors have to be pushed on from the front, one ofthe fittings is screwed on at an angle of 90°.The drawings opposite show just some of the applications possiblewith Multi-Clip. Simple, easy and economical.
� Only 1 fitting for all types of application.
� Strong location via spring-loaded flexible tongues with serrated surfaces.
� Variable screw-on positions allow fixing from above, from the front, from the side etc.
� Compensation of installation tolerances.� Adjustability after installation.
KAT_173_186_G8_USA.qxd 01.02.2006 2:21 Uhr Seite 186
187
min. 13
9,5min. 16,5
ø5
min. 13
min. 3
ø12
min. 13
9,5
ø12
Everfix
The non-release connecting fitting with universal possibilities
Article Order no. PU
Everfix with threaded studfor 5 mm drilling 079 118 200
Article Order no. PU
Everfixwith Duplo 079 119 200
This inconspicuous connecting fitting consists merely of a threaded stud and a knock-in socket with aspring steel disc.Components can therefore be push-fitted easily and permanently by hand.Small but powerful, since a pull-out strength of 176 lbs (80 kg) was established in numerous tests.
Connecting fittingEverfix with Duplo
Drill for socket. Position hole marking templateand mark hole centre for studwith the centre point.
Drill for stud. Position hole marking templateand mark hole centre for socketwith the centre point.
Hole marking template for Everfix
Connecting fittingEverfix with threaded studfor 5 mm drilling
Article Order no. PU
Hole marking templateEverfix 079 692 1
min.
min.
min. 13 min. 13
PU 200 = 400 Everfix + 200 Duplo
KAT_187_198_G8_USA.qxd 01.02.2006 1:18 Uhr Seite 187
188
ø3,5
10
10ø5
25
25
20,520,5
43
9
9
Universal corner connector
Universal corner connectorwith plastic cover cap• Universal corner connector for small carcases and light loading.• Mounting with 3,5 mm dia. countersunk screws.• The cover cap simply clips on to conceal the screws.
Article Finish Order no. PU
Universal white 044 742 100corner connector black 044 743 100
One PU consists of 100 connectors and 100 cover caps
KAT_187_198_G8_USA.qxd 01.02.2006 1:18 Uhr Seite 188
189
ø5
Connecting screws VHS 32
Connecting angle
Connecting screws VHS 32Carcase connector for extra strength. For 5 mm dia. drilling.The connecting sleeves are 27 mm long. The threaded sleeve is set back to facilitate screwing in the connector screw.Screw M4 x 15 mm, nickel-plated steelConnecting sleeve, nickel-plated steel
Article Wood thickness Order no. PU
VHS 32/27 28 – 36 mm 1 054 519 2000
28 - 36
2
7
2515
11,5
ø7
20,7 16
4232
5043,5
37
1637
Connecting angle for 32 mm hole linesCan be used universally as a connectingfitting for carcase panels, back panelsand drawer fronts.chrome-plated or plastic coated steel
Article Finish Order no. PU
Connecting angle chrome-plated 1 006 734 25032 mm white 1 007 206 250
Article Length Order no. PU
Euro screw 6,3 x 13 mm 1 005 194 1000
Euro screwfor 5 mm diameter drilled holes, nickel-plated steelEN-Pozidriv pan head screw
KAT_187_198_G8_USA.qxd 01.02.2006 1:18 Uhr Seite 189
190
x+
-
Height adjustable leg KorrektLoad-bearing capacity 990 lbs (450 kg) / each
Korrekt..the height adjustable leg with several assembly advantages � A perfect combination of block, leg and plinth fixing� Ensures that the leg is securely held in place
during the mounting and moving of the cabinet� Wide foot, diameter 80 mm� Height adjustment plus/minus is easy to operate,
either manually or by using a screwdriver� Runner clip for plinth drawers for plinth height 150 mm� Load-bearing capacity 990 lbs (450 kg) / each� black plastic
Article Plinth height Range of adjustment Footprint Order no. PUSize X mm from - to mm ø mm
Height adjustable leg 80 -6/+30 74 - 110 80 070 151 200Korrekt 100 -11/+25 89 - 125 80 061 851 100
150 -50/+10 100 - 160 80 020 018 100
Height adjustment, manual Height adjustment, from the front, with a screwdriver
Height adjustment, from the top, with a screwdriver
KAT_187_198_G8_USA.qxd 01.02.2006 1:18 Uhr Seite 190
191
8064
6423,539,5 95
25
ø 10
11,5
642139,5
92
25
64 80
80
39,595
ø 15
12
64
25
80
39,592
ø15
13
6
9 x 45°25
64
Fixing block for height adjustable leg Korrekt
Fixing blockscrew-on versionblack plastic
Fixing blockwith 4 knock-in socketsblack plastic
Fixing blockwith 2 knock-in socketsblack plastic
Fixing block with 2 expanding dowels/pinsWith wide support for side panel black plastic
Article Order no. PU
Fixing block, screw-on version 061 854 200
In case of adjustment from the top:drilling diameter ø8
Front plinth
Cabinet front edge
Side plinth blind
In case of adjustment from the top:drilling dia. ø8
Front plinth
Cabinet front edge
Cabinet side In case of adjustmentfrom the top:drilling diameter ø8
Cabinet side
Expanding dowel
Side plinth blind
Front plinth
Cabinet front edge
Article Order no. PU
Fixing block with 4 knock-in sockets 047 654 40
Article Order no. PU
Fixing block with 2 knock-in sockets 047 655 40
Article Order no. PU
Fixing block with 2 expanding dowels/pins 079 689 40
In case of adjustmentfrom the top:drilling diameter ø8
Cabinet sideCabinet side
Side plinth blind
Side plinth blind
Cabinet front edge
Front plinth
Plinth clip
Plinth clipPlinth clip
Plinth clip
Plinth clip
Plinth clip
KAT_187_198_G8_USA.qxd 01.02.2006 1:18 Uhr Seite 191
ø50
+
-
ø35
25
50
Size Range of Order no. PUX adjustment
100 mm - 5/+23 mm 902 843 900 200150 mm -15/+13 mm 999 000 687 100
Height adjustable leg Euro Perfect in combination with various fixing blocks and plinth clips. Easy toadjust, either manually or by using a screwdriver.Load-bearing capacity 990 lbs (450 kg) / eachblack plastic
AdapterCan be used in cases where height extension of 50 mm is required.black plastic
Article Order no. PU
Adapter 071 844 40
Article Order no. PU
� Clip 902 186 400 2000� Knock-in plate 902 204 500 2000� Screw-on plate 902 048 400 5000
Range of adjustment
Size X
Toe Kick Supportblack / white plastic
Cut toe kick height 4 mmlower than height of leveler
12-16
4
ø 4 x 7 mm
Cabinet front Front panel
Countersunk screws ø4 x 7 mm
Side plinth
3,2
6,3
Plinth
Groove forknock-in plate
�
�
�
12-16
4
192
Height adjustable leg Euro Load-bearing capacity 990 lbs (450 kg) / each
KAT_187_198_G8_USA.qxd 01.02.2006 1:18 Uhr Seite 192
193
27
ø50
7 x 45°
58
25
ø25
7 x 45°
ø50
27
25
58
Fixing block for height adjustable leg Euro
Fixing block, screw-on versionblack plastic
Fixing block, knock-in versionfor hole diameter 25 mm black plastic
Article Order no. PU
Fixing block, knock-in version 073 510 40
Article Order no. PU
Fixing block, screw-on version 071 847 40
Side plinth
Cabinet side Cabinet side
Side plinth
Countersunk screws ø 4 x 17 mm
KAT_187_198_G8_USA.qxd 01.02.2006 1:19 Uhr Seite 193
194
8
5
ø5
8
2
ø5
Mounting example Article
Shelf supports
Finish Order no. PU
nickel-plated 1 010 564 2000
Shelf support Sekura 8Pin diameter 5 mm with glass shelf support transparent die-cast zinc
Finish Order no. PU
nickel-plated 1 006 203 2000bronze 048 584 500
Shelf support Universal DPin diameter 5 mmdie-cast zinc
8
4
8
5
7,5 ø5
10
ø5
Finish Order no. PUwhite 1 004 831 4000brown 025 091 500translucent 1 006 161 4000
Finish Order no. PU
nickel-plated 1 005 767 1000
Shelf support SafetyPin diameter 5 mmSteel pin, housed in moulded plastic
Shelf support Universal 1Pin diameter 5 mm1 additional pinfor shelfdie-cast zinc
10,5
ø8
Article Finish Order no. PU
Shelf support nickel-plated 025 201 500Sleeve nickel-plated 025 203 500
Flattened shelf support with sleevePin diameter 8 mmsteel
ø5
KAT_187_198_G8_USA.qxd 01.02.2006 1:19 Uhr Seite 194
195
8
2
7
7,5
ø5ø5
ø5
2,5
24
3,758
ø5
8ø5
ø5
0,5
8
ø5
Mounting example Article
Finish Order no. PU
nickel-plated 079 708 500
Shelf supports UniversalPin diameter 5 mm1 additional pin diameter 5 mmfor shelfdie-cast zinc
Finish Order no. PU
chrome-plated 1 005 432 3000
Push-in shelf supportø 5 x 24 mmsteel
Finish Order no. PU
chrome-plated 016 181 500
Push-in shelf supportPin diameter 5 mmsteel
Finish Order no. PU
chrome-plated 1 004 701 5000
Shelf supports DuploPin diameter both sides 5 mm steel
Flattened shelf supportfor hole line ø 5 mmsteel
Finish Order no. PU
nickel-plated 052 096 2500brass-plated 052 097 2500
Shelf supports
12-15
8
ø5
Article Order no. PU
Shelf studswith pin for hole diameter 5 mm 1 005 082 5000
Shelf studsplastic, translucent
KAT_187_198_G8_USA.qxd 03.02.2006 15:04 Uhr Seite 195
196
Cabinet suspension bracketSAH 215
Concealed steel cabinet suspension bracket
� For rail and hook suspension� Loading capacity 140 lbs (65 kg) / piece� Mounted by 3 pins into the side panel,
additional screw connection is also possible� Suitable for back panel recess measuring at least 16 mm� Quick, convenient height adjustment through a sturdy adjustment screw
and gear: ± 9 mm� Depth adjustment: max. 25 mm� Lateral adjustment ± 3 mm if hook suspension is used� Adjustment screws are secured against unintentional removal � Lift-off height: 7,5 mm� Hook suspension: the closed form of the hook prevents the cabinet from
slipping off.� Can be used with suspension rail Type B – see page 198� Steel, zinc-plated - fully recyclable
Article Order no. PU
SAH 215 079 716 25 sets
Depth adjustment max. 25 mm
Height adjustment ± 9 mm
Screw connection in the cabinet sidepanel with wood screw 3,5 x 20
1 set = 1 left and 1 right cabinet suspension bracket
STEEL RECYCLING
Cabinet suspension brackets
Accessories for cabinet suspension brackets – see page 198Guidelines for the load-bearing capacity of cabinet suspension brackets – see page 198
KAT_187_198_G8_USA.qxd 01.02.2006 1:20 Uhr Seite 196
197
Article Finish Order no. PUleft right
SAH 116 S steel nickel-plated 1019 600 1019 599 100steel white 1019 619 1019 618 100
Cabinet suspension bracket SAH 116 SSAH 116 S, screw-on versionCombi hook for rail and hook suspensionLoading capacity 140 lbs (65 kg) / piece • Adjustment possibilities
Height: ± 7 mmDepth: 15 mmLateral adjustment ± 3 mm if hook suspension is used
• Can be used with suspension rail - see page 198• Hook suspension: the closed form of the hook prevents the cabinet
from slipping off
Rear panel: rear wall set back resp. groove depth min. 16 mm
Cabinet suspension bracketSAH 116 S
4030
2232
14
31
16 3214
31
16 3214
54
14
11±3
54
14
Adjustment possibilities
Mounting
Hook suspension Rail suspension
±7
max. 15
SAH 116 SFixing with screw countersunkø 4 x 15 mm
Accessories for cabinet suspension brackets – see page 198Guidelines for the load-bearing capacity of cabinet suspension brackets – see page 198
KAT_187_198_G8_USA.qxd 03.02.2006 15:04 Uhr Seite 197
198
Fixing rail
Article Finish Order no. PU
Fixing rail Type B electro plated 052 118 25Rail cover white 052 119 50
Cut out for hanging railbetween cabinets
Loading Capacity forCabinet Suspension Bracketsand AccessoriesPlease observe the following when using cabinet suspension brackets and accessories.1. We, as a hardware manufacturer, have no influence
in regard to materail and/or manufacturing qualityof cabinets.
2. We also have no influence in regard to wall materialsonto which cabinets are hung.
3. The hooks and dowels offered are determined for usein brick, concrete or similar materials.The material requires an 8 mm ø hole into whichthe dowel is knocked in flush.The minimal screw-in depth of the hook is equalto the hook length minus 10 mm.
4. For application into other materials we recommendeduse of special fixing dowels/screws/hooks availablelocally.
5. Hanging wall cabinets with more than 1 m2 total shelving(shelf, top- and bottom panel); fixing in conjunction withrails are recommended. These should be screwed downwith at least 4 special screws.
8´
286,2
4,5
8
1,75
1´
Fixing rail Type Blength 8'cut length available on requestSteel electro platedPacking: = 25 pieces, per case
(length approx. 8' each)Rail coverlength 8'Plastic white
KAT_187_198_G8_USA.qxd 01.02.2006 1:20 Uhr Seite 198
277277
OrderNumberIndex
Order no. Page
000 351 19010 067 71010 067 73010 067 75010 080 10010 080 71010 080 73010 080 75010 085 71010 085 73010 085 75010 573 17013 292 106013 292 107013 293 107013 294 108013 295 108013 296 108013 300 61013 392 18013 397 108016 173 81016 174 81016 175 81016 176 81016 177 81016 178 81016 181 195020 014 13020 166 11021 154 61025 048 61025 091 194025 201 194025 203 194033 687 135040 129 156040 133 156040 221 57040 222 57040 223 57040 224 57040 225 57040 265 170040 267 268040 268 268040 268 272040 340 56040 341 56040 342 56040 494 56040 495 56041 355 170041 356 171041 357 171041 358 171041 359 171041 361 171041 362 171041 363 171041 364 171041 365 171041 366 171041 367 172041 368 172041 369 172041 637 167041 639 167041 641 167041 643 167041 645 167042 813 60042 814 60042 815 60043 017 60043 018 60043 019 60044 742 188044 743 188044 763 14044 764 13044 765 13
Order no. Page
044 766 13044 766 14044 945 104044 947 104044 949 104044 952 104044 954 104045 038 55045 284 140045 285 140045 286 140045 287 140045 288 140045 289 140045 290 140045 291 140045 292 140045 293 140045 294 140045 295 140045 296 140045 297 140046 084 13046 628 13046 629 13046 695 61046 796 10047 303 11047 307 11047 353 61047 654 191047 655 191047 956 10048 043 61048 098 48048 584 194048 771 19050 001 148050 003 148050 005 148050 007 148050 009 148050 011 148050 013 150050 015 150050 017 150050 019 150050 021 150050 023 150050 033 152050 035 152050 037 152050 039 152050 041 152050 043 152050 053 154050 055 154050 057 154050 059 154050 061 154050 063 154050 101 205050 101 207050 101 209050 101 211050 101 213050 101 215050 101 217050 101 267050 101 272050 102 227050 102 229050 102 243050 102 267050 103 231050 103 239050 103 245050 103 267050 104 237050 104 241050 104 249050 105 235
Order no. Page
050 105 247050 106 233050 120 269050 120 273050 121 219050 121 221050 121 259050 121 261050 122 219050 122 259050 122 261050 123 219050 123 221050 123 259050 123 261050 124 219050 124 221050 124 259050 124 261050 125 219050 125 221050 125 259050 125 261050 126 219050 126 221050 126 259050 126 261050 127 219050 127 221050 127 259050 127 261050 128 219050 129 221050 129 259050 129 261050 131 219050 133 219050 134 219050 135 219050 136 219050 138 253050 138 257050 138 260050 138 261050 138 263050 138 265050 138 268050 138 272050 139 219050 140 221050 141 253050 141 257050 141 260050 141 261050 141 263050 141 265050 141 268050 141 273050 142 253050 142 257050 142 260050 142 261050 142 263050 142 265050 142 269050 142 273050 143 253050 143 257050 143 260050 143 261050 143 263050 143 265050 143 269050 143 273050 144 253050 144 257050 144 260050 144 261050 144 263050 144 265050 144 269050 144 273
Order no. Page
050 145 253050 145 257050 145 260050 145 261050 145 263050 145 265050 145 269050 145 273050 146 253050 146 257050 146 260050 146 261050 146 263050 146 265050 146 269050 146 273050 147 253050 147 257050 147 260050 147 261050 147 263050 147 265050 147 269050 147 273050 148 253050 148 257050 148 260050 148 261050 148 263050 148 265050 148 269050 148 273050 149 260050 149 262050 150 260050 150 262050 151 259050 152 221050 153 221050 154 221050 155 221050 157 221050 158 221050 160 260050 160 262050 161 260050 161 261050 162 259050 163 259050 164 259050 165 259050 166 259050 167 259050 168 259050 169 259050 170 259050 171 259050 172 259050 173 260050 173 262050 174 264050 175 275050 176 275050 177 275050 178 275050 179 275050 180 251050 180 262050 181 251050 181 262050 182 251050 182 262050 183 251050 183 262050 184 251050 184 262050 185 251050 185 262050 186 251050 186 262050 187 252050 187 256
Order no. Page
050 187 264050 187 265050 188 251050 191 251050 192 251050 194 251050 195 251050 196 251050 197 252050 197 262050 198 262050 199 252050 199 263050 401 251050 402 251050 403 255050 403 264050 404 255050 404 264050 405 255050 405 264050 406 255050 406 264050 407 255050 407 264050 408 255050 408 264050 409 255050 409 264050 410 255050 411 255050 412 255050 413 255050 414 255050 415 255050 416 255050 417 255050 418 255050 419 256050 419 265050 420 256050 420 265050 421 256050 421 264050 422 255050 423 255050 424 275050 425 275050 427 275050 428 275050 429 275050 430 275050 431 275050 433 274050 434 274050 435 274050 436 274050 440 274050 441 274050 448 219050 448 221050 448 268050 448 272050 448 274050 449 219050 449 221050 449 268050 449 272050 449 274050 450 219050 450 221050 450 268050 450 272050 450 274050 451 219050 451 221050 451 268050 451 272050 451 274050 452 274050 453 274050 454 274
KAT_277_280_USA.qxd 01.02.2006 19:23 Uhr Seite 277
278
OrderNumberIndex
Order no. Page
050 455 274050 456 252050 456 256050 456 263050 456 265050 457 252050 457 256050 457 263050 457 264050 458 252050 458 264050 459 252050 459 256050 459 263050 459 265050 461 205050 461 207050 461 209050 461 266050 462 205050 462 207050 462 209050 462 266050 464 205050 464 207050 464 209050 464 266050 466 227050 466 229050 466 266050 468 227050 468 229050 468 266050 469 227050 469 229050 469 266050 470 227050 470 229050 470 266050 471 227050 471 229050 471 266050 472 227050 472 229050 472 266050 475 243050 475 266050 477 243050 477 266050 485 227050 486 227050 487 227050 488 227050 489 227050 496 209050 497 209050 499 209050 500 229050 500 243050 501 229050 502 229050 504 229050 505 243050 506 243050 511 205050 511 266050 512 227050 512 266050 513 207050 513 227050 513 267050 514 267050 515 229050 515 243050 515 267050 516 209050 516 229050 516 243050 516 267050 517 211050 517 213050 517 215
Order no. Page
050 517 217050 517 231050 517 233050 517 235050 517 237050 517 239050 517 241050 517 245050 517 247050 517 249050 517 271050 518 211050 518 213050 518 215050 518 217050 518 231050 518 233050 518 235050 518 237050 518 239050 518 241050 518 245050 518 247050 518 249050 518 271050 519 211050 519 213050 519 215050 519 217050 519 247050 519 270050 520 211050 520 213050 520 215050 520 217050 520 270050 521 211050 521 213050 521 215050 521 217050 521 270050 522 211050 522 213050 522 215050 522 217050 522 270050 523 211050 523 213050 523 215050 523 217050 523 229050 523 270050 524 211050 524 213050 524 215050 524 217050 524 270050 525 211050 525 213050 525 215050 525 217050 525 270050 526 231050 526 233050 526 239050 526 270050 527 231050 527 233050 527 239050 527 270050 528 231050 528 233050 528 239050 528 270050 529 231050 529 233050 529 239050 529 270050 530 231050 530 233050 530 239050 530 270
Order no. Page
050 531 231050 531 231050 531 233050 531 239050 531 270050 532 231050 532 233050 532 239050 532 270050 533 235050 533 237050 533 241050 533 270050 534 235050 534 237050 534 241050 534 270050 535 235050 535 237050 535 241050 535 270050 536 235050 536 237050 536 241050 536 270050 537 235050 537 237050 537 241050 537 270050 538 235050 538 237050 538 241050 538 270050 539 235050 539 237050 539 241050 539 270050 540 245050 540 270050 541 245050 541 270050 542 245050 542 270050 543 245050 543 270050 544 245050 544 270050 545 245050 545 270050 546 245050 546 270050 548 249050 548 271050 549 249050 549 271050 550 249050 550 271050 551 249050 551 271050 552 249050 552 271050 553 249050 553 271050 555 247050 555 271050 556 247050 556 271050 557 247050 557 271050 558 247050 558 271050 558 271050 559 247050 559 271050 560 247050 560 271050 561 211050 561 213050 561 215050 561 217050 561 231050 561 233
Order no. Page
050 561 235050 561 237050 561 239050 561 241050 561 245050 561 247050 561 251050 561 273050 562 219050 562 221050 562 268050 563 211050 563 231050 563 233050 563 235050 563 245050 563 247050 563 272050 564 213050 564 271050 565 215050 565 233050 565 235050 565 237050 565 247050 565 272050 566 217050 566 239050 566 241050 566 271050 567 211050 568 211050 570 211050 572 215050 574 215050 576 217050 577 217050 578 217050 579 217050 580 217050 581 231050 581 245050 582 231050 584 231050 585 231050 586 233050 587 233050 588 233050 590 233050 591 235050 592 235050 593 235050 594 235050 595 235050 596 237050 596 249050 597 237050 598 237050 599 237050 600 237050 601 239050 602 239050 603 239050 604 239050 605 239050 606 241050 607 241050 608 241050 609 241050 610 241050 617 247050 618 247050 619 247050 620 247050 621 249050 622 249050 623 249050 624 249050 625 249051 264 140051 264 162051 265 140
Order no. Page
051 265 162051 401 150051 403 150051 405 150051 407 150051 417 152051 419 152051 421 152051 423 152051 433 154051 435 154051 437 154051 439 154051 449 156051 451 156051 453 156051 455 156051 465 156051 467 156051 469 156051 471 156051 481 158051 483 158051 485 158051 487 150052 011 266052 012 266052 013 266052 014 266052 015 266052 019 268052 019 272052 021 268052 021 272052 022 10052 096 195052 097 195052 101 148052 101 150052 101 152052 101 154052 101 156052 101 158052 101 160052 101 166052 102 148052 102 150052 102 152052 102 154052 102 156052 102 158052 102 160052 102 166052 118 198052 119 198052 271 172052 272 172052 273 172052 274 172052 997 10053 817 10053 818 10053 943 10053 949 10053 950 10053 951 10053 952 10053 953 10053 955 10054 997 150054 997 152054 997 154054 997 156054 998 150054 998 152054 998 154054 998 156061 266 10061 285 10061 651 10061 851 190061 854 191
KAT_277_280_USA.qxd 03.02.2006 15:41 Uhr Seite 278
279
OrderNumberIndex
Order no. Page
064 820 156064 820 166064 880 184065 517 182065 532 181069 250 10070 051 56070 052 56070 151 190070 263 13070 264 13070 265 13070 266 13070 267 13070 268 13070 268 17070 269 13070 269 17070 712 56070 713 56071 054 175071 055 175071 844 192071 847 193071 925 70071 925 72071 925 74071 925 77071 925 78072 120 61072 164 137072 165 137072 166 137072 167 137072 168 137072 169 137072 170 137072 172 137072 173 137072 174 137072 175 137072 176 137072 177 137072 178 137072 904 135072 905 135072 960 56072 967 56072 968 56073 210 135073 211 135073 212 135073 214 135073 276 170073 277 170073 278 170073 279 170073 280 170073 281 170073 282 170073 283 170073 284 170073 287 172073 288 172073 289 172073 290 172073 291 172073 292 172073 293 172073 294 172073 295 172073 296 172073 510 193073 617 183073 915 42073 919 42073 923 42073 925 43073 926 43073 927 43073 930 46073 934 48
Order no. Page
073 938 53074 688 184076 497 10077 681 44077 683 44077 692 46077 701 48077 710 52077 721 54077 924 105077 924 106077 925 105077 925 106078 022 10078 091 118078 093 18078 093 156078 095 13078 096 13078 096 17078 096 156079 004 13079 005 13079 005 17079 005 156079 118 187079 119 187079 173 148079 174 148079 323 60079 324 60079 325 60079 349 60079 350 60079 490 175079 491 175079 525 184079 527 185079 538 185079 564 156079 566 156079 637 18079 637 156079 641 179079 643 180079 646 181079 647 182079 648 182079 649 183079 689 191079 692 187079 708 195079 716 196079 790 61079 791 41100 616 194200 018 1901 001 142 821 001 143 821 001 144 821 001 145 821 004 701 1951 004 831 1941 005 074 1771 005 077 1841 005 082 1951 005 194 1891 005 432 1951 005 767 1941 006 203 1941 006 734 1891 007 206 1891 008 302 1641 008 302 1671 008 302 1701 008 302 1711 008 313 1641 008 313 1671 008 313 1701 008 313 1711 009 684 1861 010 564 194
Order no. Page
1 016 559 1831 018 483 1821 019 473 1801 019 474 1801 019 479 1791 019 480 1791 019 482 1821 019 484 1821 019 487 1811 019 493 1821 019 543 1851 019 544 1851 019 599 1971 019 600 1971 019 618 1971 019 619 1971 019 686 1841 019 693 1821 019 879 781 029 522 371 029 956 1351 030 883 771 030 921 371 030 925 371 030 986 1751 035 240 1841 035 241 1851 039 448 1371 039 999 971 039 999 991 039 999 1011 039 999 1031 039 999 1121 040 000 971 040 000 991 040 000 1011 040 000 1031 040 000 1121 040 680 971 040 680 991 040 680 1011 040 680 1031 040 680 1121 040 681 971 040 681 991 040 681 1011 040 681 1031 040 681 1121 042 477 1371 042 481 1371 042 484 1371 042 487 1371 042 657 1371 042 660 1371 042 702 1371 042 781 1371 042 914 971 042 914 991 042 914 1011 042 914 1031 042 914 1121 042 915 971 042 915 991 042 915 1011 042 915 1031 042 915 1121 043 054 971 043 054 991 043 054 1011 043 054 1031 043 054 1121 043 055 971 043 055 991 043 055 1011 043 055 1031 043 055 1121 043 199 971 043 199 991 043 199 1011 043 199 1031 043 199 1121 043 200 97
Order no. Page
1 043 200 991 043 200 1011 043 200 1031 043 200 1121 043 836 1351 043 841 1351 043 844 1351 044 077 1371 044 162 1371 044 253 1371 044 260 1371 046 579 1481 050 437 1371 051 901 1711 054 519 1891 056 053 1641 056 063 1641 056 068 1641 056 073 1641 056 079 1641 056 084 1641 058 549 391 058 550 391 061 448 1001 061 448 1021 061 450 961 061 488 961 061 965 981 061 965 1581 062 394 981 062 501 961 062 501 1001 062 502 961 062 502 1001 063 453 371 063 456 371 063 458 371 063 461 391 063 463 391 063 674 961 063 674 1001 063 675 981 063 677 981 063 796 1021 063 797 1021 063 798 1021 064 336 1481 064 341 1481 064 372 1581 064 375 1581 064 376 1581 064 377 1581 064 378 1581 064 379 1581 064 578 1481 065 782 761 065 784 761 065 786 761 065 787 761 065 874 761 065 876 761 067 494 1351 067 494 1371 067 494 1401 067 495 1351 067 495 1371 067 495 1401 068 510 981 070 630 981 070 715 391 071 605 581 071 605 601 071 606 581 071 606 601 071 607 581 071 607 601 071 608 581 071 608 601 071 609 581 071 609 601 071 625 581 071 626 58
Order no. Page
1 071 627 581 071 628 581 071 629 581 071 665 581 071 666 581 071 667 581 071 668 581 071 669 581 071 891 1701 071 893 1701 071 894 1701 071 895 1701 071 896 1701 071 897 1701 071 898 1701 071 899 1701 071 900 1701 071 902 1711 071 905 1711 071 906 1711 071 907 1711 071 908 1711 071 909 1711 072 960 381 072 961 381 072 962 381 073 353 381 073 354 381 073 355 381 073 376 401 073 380 401 073 385 401 073 407 401 073 711 371 074 009 1021 074 665 1641 075 310 1711 076 538 571 076 539 571 076 811 661 076 812 661 076 814 661 076 815 661 076 819 401 076 883 1821 076 914 761 077 311 1711 079 222 791 079 566 1811 079 676 761 079 689 1751 080 575 711 080 575 731 080 575 751 082 693 381 083 439 711 083 439 731 083 439 751 083 604 1181 083 935 791 083 936 799 000 239 1829 002 570 1629 002 583 1629 002 584 1629 002 585 1629 002 586 1629 003 948 1759 003 954 1759 004 195 989 004 618 1189 006 139 599 006 140 599 006 141 599 006 142 599 006 143 599 006 655 1759 007 355 989 007 356 989 007 997 1759 008 111 409 008 683 59
KAT_277_280_USA.qxd 01.02.2006 19:23 Uhr Seite 279
280
OrderNumberIndex
Order no. Page
9 008 686 599 008 687 599 008 689 599 008 690 599 008 713 1759 008 752 989 008 753 989 008 754 989 009 923 989 009 924 989 013 069 379 013 069 389 013 069 399 013 069 409 013 069 429 013 069 449 013 069 469 013 069 489 013 069 529 013 163 1759 015 112 379 015 112 399 015 112 429 015 115 379 015 115 389 015 115 399 015 115 409 015 115 429 015 115 449 015 115 469 015 115 489 015 115 529 015 676 1769 015 781 969 015 781 1009 015 782 969 015 782 1009 015 786 969 015 786 1009 015 787 969 015 787 1009 015 793 969 015 793 1009 015 794 969 015 794 1009 015 811 969 015 811 1009 015 812 969 015 812 1009 019 473 1189 019 648 969 019 648 1009 019 660 1709 019 693 969 019 693 1009 019 694 969 019 694 1009 019 703 1719 020 128 1729 020 129 1729 020 130 1729 020 131 1729 020 132 1729 020 133 1729 020 134 1729 020 135 1729 020 136 1729 020 137 1729 020 138 1729 020 139 1729 020 140 1729 021 314 719 021 314 739 021 314 759 022 273 1009 022 274 1009 022 284 1029 022 285 1029 022 299 709 022 729 1249 022 751 1249 022 762 124
Order no. Page
9 022 774 1249 022 783 1249 025 970 1009 025 970 1029 026 277 1269 026 309 1269 026 381 1269 026 410 1269 026 422 1269 026 835 1309 026 839 1249 026 839 1269 026 839 1289 027 876 389 027 941 379 027 941 389 027 941 429 027 941 449 027 941 469 027 941 489 036 837 1309 037 251 749 037 906 729 038 342 379 038 342 399 038 342 429 038 343 379 038 343 429 038 346 389 038 347 389 038 348 389 039 738 979 039 738 999 039 738 1019 039 738 1039 039 738 1169 039 741 979 039 741 999 039 741 1019 039 741 1039 039 741 1169 039 758 1029 039 761 1029 039 762 1029 039 824 599 039 825 599 039 826 599 040 007 989 040 153 979 040 153 999 040 153 1019 040 153 1039 040 153 1169 040 154 979 040 154 999 040 154 1019 040 154 1039 040 154 1169 040 166 979 040 166 999 040 166 1019 040 166 1039 040 166 1169 040 167 979 040 167 999 040 167 1019 040 167 1039 040 167 1169 040 397 599 040 398 599 040 498 659 040 499 659 040 500 659 046 180 1789 046 182 1789 046 184 1789 046 186 1789 046 288 979 046 288 999 046 288 1019 046 288 1039 046 288 114
Order no. Page
9 046 289 979 046 289 999 046 289 1019 046 289 1039 046 289 1149 046 294 979 046 294 999 046 294 1019 046 294 1039 046 294 1149 046 295 979 046 295 999 046 295 1019 046 295 1039 046 295 1149 046 304 979 046 304 999 046 304 1019 046 304 1039 046 304 1149 046 305 979 046 305 999 046 305 1019 046 305 1039 046 305 1149 046 394 599 046 480 809 046 481 809 046 482 809 046 596 599 046 597 599 046 633 599 046 634 599 046 669 659 046 671 659 046 806 379 046 807 379 046 808 389 046 809 399 047 171 979 047 171 999 047 171 1019 047 171 1039 047 171 1149 047 172 979 047 172 999 047 172 1019 047 172 1039 047 172 1149 047 180 979 047 180 999 047 180 1019 047 180 1039 047 180 1149 047 181 979 047 181 999 047 181 1019 047 181 1039 047 181 1149 047 644 1769 047 862 1769 047 864 1779 047 866 1779 047 974 1769 047 976 1769 048 187 969 048 187 1009 048 188 969 048 188 1009 048 204 969 048 204 1009 048 205 969 048 205 1009 048 208 969 048 208 1009 048 209 969 048 209 1009 048 210 969 048 210 1009 048 211 969 048 211 1009 048 213 96
Order no. Page
9 048 213 1009 048 214 969 048 214 1009 048 740 1289 048 776 1289 048 793 1289 048 819 1409 048 823 1409 048 824 1409 048 826 1409 048 827 1409 048 828 1409 048 829 1409 048 830 1409 048 831 1409 048 832 1409 048 833 1409 048 834 1409 048 835 1409 048 836 1409 048 930 989 048 931 989 048 936 989 048 937 989 048 976 1289 048 982 1289 050 448 989 050 619 1509 050 620 1509 050 623 1509 050 624 1509 050 627 1509 050 628 1509 050 631 1509 050 632 1509 050 635 1509 050 636 1509 050 639 1509 050 640 1509 050 660 1489 050 661 1489 050 662 1489 050 663 1489 050 664 1489 050 665 1489 050 666 1489 050 667 1489 050 668 1489 050 669 1489 050 670 1489 050 671 1489 050 685 1489 050 685 1509 050 685 1529 050 685 1549 050 686 1489 050 686 1509 050 686 1529 050 686 1549 050 687 1489 050 687 1509 050 687 1529 050 687 1549 050 688 1489 050 688 1509 050 688 1529 050 688 1549 050 689 1489 050 689 1509 050 689 1529 050 689 1549 050 689 1569 050 690 1489 050 690 1509 050 690 1529 050 690 1549 050 690 1569 050 691 1489 050 691 1509 050 691 1529 050 691 1549 050 691 156
Order no. Page
9 050 692 1489 050 692 1509 050 692 1529 050 692 1549 050 692 1569 050 693 1489 050 693 1509 050 693 1529 050 693 1549 050 693 1569 050 694 1489 050 694 1509 050 694 1529 050 694 1549 050 694 1569 050 695 1489 050 695 1509 050 695 1529 050 695 1549 050 696 1489 050 696 1509 050 696 1529 050 696 1549 050 709 1549 050 710 1549 050 711 1549 050 712 1549 050 713 1549 050 714 1549 050 715 1549 050 716 1549 050 717 1549 050 718 1549 050 719 1549 050 720 1549 050 739 1529 050 750 1529 050 753 1529 050 754 1529 050 759 1529 050 760 1529 050 763 1529 050 764 1529 050 767 1529 050 768 1529 050 769 1529 050 770 1529 051 863 1029 051 864 1029 051 875 1029 052 237 1529 052 273 1509 052 273 1549 052 273 1569 052 275 1509 052 275 1529 052 275 1549 052 275 1569 053 017 1109 053 342 1109 054 503 969 054 503 1009 054 504 969 054 504 1009 054 507 989 054 508 989 054 921 1569 054 922 1569 054 923 1569 054 926 1569 054 927 1569 054 928 1569 055 093 130902 048 400 192902 186 400 192902 204 500 192902 843 900 192999 000 687 192
KAT_277_280_USA.qxd 03.02.2006 15:41 Uhr Seite 280
www.hettich.com
060075
Furn
iture
Fitt
ings
and
App
licat
ions
–US
Sto
ckin
g Ca
talo
g
FurnitureFittings andApplicationsUS Stocking Catalog
KAT_Umschlag_USA.qxd 01.02.2006 19:27 Uhr Seite 1