344 bloor street w, suite 607, toronto, on canada m5s 3a7 · 344 bloor street w, suite 607,...
TRANSCRIPT
344 Bloor Street W, Suite 607, Toronto, ON Canada M5S 3A7
www.lprglobal.com | www.uskoreahotlink.com
Tel.: +1 416-423-5590
E-Mail: [email protected]
Steel Manufacturing Equipment Pg. 3
Custom-Manufactured Precision Industrial Rolls & Shafts Pg. 4
Manufacturing Capabilities & Roll Materials Pg. 6
Clients: Steel Manufacturing Equipment Pg. 7
Clients: Rolls for Rolling Mills Pg. 8
Clients: Rolls for Paper & Chemical Pg. 9
Certifications Pg. 10
Contents
http://www.uskoreahotlink.com/products/manufacturing/precision-industrial-rolls-shafts/
3
Steel Manufacturing Equipment
• Uncoiler
• Conveyor Roll Assembly
• Carry Over Table
• Air Dryer System
• Bridle Unit
• Skin Pass Mill Bridle
• 4 Roll Type Bridle
• Pinch Roll Unit
• Vertical Steering Unit
• Hot Leveler Cassette Assembly
• Hollow Roll Assembly
• Feed Roll Assembly
• Roller Table
• Roller Table Casing
• Casing & Miter Gear
• Miter Gear Assembly
• DSTS Exit Pinch Roll
• DS Pinch Roll Assembly
• SS Pinch Roll Assembly
• DSTS Entry Pinch Roll Assembly
• Shear
• Entry Shear & Three Roll
• B-Cooling Bed
• Rapid Conveyance (Entry)
• Rapid Conveyance (Exit)
• Chain Conveyor
• Coil Skid Car
• Coil Car
Since inception in 2006, steel manufacturing equipment such as bridle units, cooling beds, roller tables, and hot
leveler cassette assemblies have been supplied to various steel mills and facilities. Some major clients include
POSCO in Turkey and Mexico, Hyundai Steel in Korea, and JFE Steel in Japan. To date, over 30 various steel
manufacturing equipment have been successfully installed in steel manufacturing facilities.
SS Pinch Roll Assembly – Hyundai Heavy Industry
Steel Manufacturing Equipment
Pinch Roll Assembly – JP Steel Plantech
http://www.uskoreahotlink.com/products/manufacturing/precision-industrial-rolls-shafts/
4
Precision Industrial Rolls
Precision Manufactured Industrial Rolls for Steel
Mills, Pulp & Paper, Thin Film, and Chemical
Industry
• Furnace Hearth Roll
• Deflector Roll
• Turn Table Roll
• Hold Down Roll
• Hot Rolling Unit Roll
• Table Roll
• Leveling Roll
• Tension Roll
• Back-Up Roll
• Special Bridle Roll
• Hollow Roll
• Feed Roll
• Cooling Bed Rolls
• Bearing Sub-Assembly
• Coupling Sub-Assembly
• Solid Roll
• PM2 Paper Roll
• Spool Roll
• Corona Roll Assembly
• Elongation Roll Assembly
• Heating Roll Assembly
• Calendar Roll
• Metering Rolls
Hot Rolling Unit – Roll Assembly
Turn Table Roll – Manufacturing Hearth Roll – Measuring
Spool Roll
http://www.uskoreahotlink.com/products/manufacturing/precision-industrial-rolls-shafts/
5
Precision Industrial Shafts & Other Products
Shafts and Cylinders
• Wind Power Main Rotor Shaft
• Clamping Ring
• Cylinder Tube
• Tie-Bar
Other
• Belt Wrapper
• Transportation Equipment for Packing Line
• Machining
Wind Turbine Main Shaft - Gamesa 850kW Gamesa 850kW (D850x1730)
Wind Power Main Shaft - Shanghai Electric 2MW Shanghai Electric 2MW (D1400x2950)
Transportation Equipment – Packing Line
http://www.uskoreahotlink.com/products/manufacturing/precision-industrial-rolls-shafts/
6
Manufacturing Capabilities & Roll Materials
http://www.uskoreahotlink.com/products/manufacturing/precision-industrial-rolls-shafts/
Manufacturing CapabilitiesRoll Diameter
• Up to 2,500 mm / 98 inches
• 1,500 mm / 59 inches (Galvanizing Coating Line Cooling Mill Stand Roller)
• 30mm / 1.2 inches (Cold Strip Mill Leveling Roller)
Roll Length (up to 15,000 mm / 590 inches)
• 9,800 mm / 386 inches (Hot Strip Mill Drive Shaft)
• Minimum Length: Based on Order
Roll Weight
• Up to 50 metric tons
Roll Heat Treating & Coating Options
• Hard Chrome Plating, Flame Hardening, Induction Hardening, Nitriding, Ceramic, Tungsten Carbide,
Copper, Plasma Spray Coating
• NBR (Nitrile Rubber), Polyurethane (PU), Hypalon, Roller Lagging, Non-Tex (Non-woven Mill Rolls),
Nylon, MC Nylon, Neoprene Brush Roller, Wire-wound Metering Rolls (Meyer Rod)
Roll MaterialsCarbon Steel
• S20C, S35C, S45C, SS400, S235JR, S235J2, S355J2G3, and other carbon steel
Alloy Steel
• SCM440, 42CrMo4, SUJ2 (52100), SNCM220 (8620), SNCM447, SKD61 (H13), SCM822, 21CrMoV5-11,
KRC14 (Special Alloy), 3-5% High Chrome (3-5 Cr Alloy Forged Steel), SUS304, SUS630, SUS420J2,
SUS316L, SWQ1R
Casting
• SCH13, SCH21, SCH15, KHR 35C (Kubota Heat Resistant Steel), SCMnCr3, GS20Mn, G240, SC450,
SC430, FCD300~450, KCR 48N (Kubota Specification)
Patented Designs• High Hardness Bridle Roller
• Noise Cancellation/Reduction Roller
7
• #2 TWB 600ton Blanking Line Entry & Exit
Equipment at Gwangyang Works
• POSCO VST STS SPL Bridle & Steering Unit
Complete Line
• CSVC Special Bridle Roll (Over HS 65 Hardness)
in POSCO Vietnam
• STS APF Roll Unit in POSCO Vietnam
• STS APL BAL Roll Unit in POSCO Turkey
• #2 CGL Roll Unit in POSCO Mexico
Clients:
Steel Manufacturing Equipment
• #2 Hot Rolling Mill Coil Car at Pohang Works
• #2 Hot Rolling Mill Coil Box at Pohang Works
• #2 Hot Rolling Mill FM Facility Renovation and
Modernization at Pohang Works
• #1 Cold Rolling Mill PL-TCM Full Line at
Gwangyang Works
• #2 Cold Rolling Mill TCM Full Line for PCM at
Gwangyang Works
• Post Bender Roll Assembly at Dangjin Works
• Feed Roll Assembly at Dangjin Works
• Leveler roll Assembly at Dangjin Works
• H-Beam Leveler Roll Assembly at Pohang Works
• Work Roll Contract (5,000tons per year) at Pohang
Works
• H-beam Line Table Roll Assembly at Pohang
Works
• Hollow Roller for Roller Table at Dangjin Works
• Solid Roller for Thick Plate Roller Table at Dangjin
Works
• PL-TCM Complete Line at Union Steel
• Pinch Roll Assembly (DS, SS, DSTS Entry & Exit)
at Dangjin Works
• Back Up Roll Assembly at Chiba Works
• Segment Roll Assembly at Chiba Works
• Leveler Roll Assembly at Chiba Works
• Coiling Bed Equipment Entry & Exit at Chiba Works
• Pinch Roll Assembly at Shinco Works
• Roller Table at Chiba Works
• Hearth Roll Assembly at Chiba Works
http://www.uskoreahotlink.com/products/manufacturing/precision-industrial-rolls-shafts/
8
Clients:
Rolls for Rolling Mills
Rolls for Cold Rolling Mill
Rolls for Thick Plate Hot Rolling Mill
Product Specifications Quantity Client
Bridle Steering Deflector ⌀800 x 1900 350 Ton POSCO VST
Back Up Roll ⌀800 x 1900 20 NSSMC
Bridle Steering Deflector ⌀1200 x 2100 400 Ton POSCO TST
Bridle Steering Deflector ⌀1200 x 2100 650 Ton POSCO Mexico
Bridle Roller ⌀1200 x 2100 20 POSCO TST
Bridle Roller ⌀1200 x 2000 16 POSCO Mahasatra
Sink Roller ⌀800 x 2100 4 POSCO Gwangyang
Hearth Roll ⌀1600 x 2250 25 HYSCO Suncheon
Deflector Pinch Roll ⌀800 x 1950 5 JFE Steel
Bridle Roller ⌀1000 x 2100 8 JSW Steel (Jindal)
Product Specifications Quantity Client
Table Roll ⌀400 x 5817 17 HYUNDAI Steel
Back Up Roll ⌀280 x 972 54 JFE Steel
Unit Roll ⌀400 x 2850 21 HYUNDAI Steel
Leveler Roll ⌀285 x 5730 5 HYUNDAI Steel
Feeder Roll ⌀400 x 5817 15 HYUNDAI Steel
Table Roll ⌀450 x 6225 10 NSSMC
Leveler Roll ⌀275 x 6120 11 JFE Steel
Turn Table Roll ⌀565 x 8447 7 (100 Ton) HYUNDAI Steel
Lubricating Roll ⌀500 x 6710 11 (100 Ton) JFE Steel
http://www.uskoreahotlink.com/products/manufacturing/precision-industrial-rolls-shafts/
9
Clients:
Rolls for Paper and Chemical
Daeyang Paper
• Press (Top and Bottom) Roll Grinding
• Calendar Roll Grinding
• Paper Roll, Wire Roll, Canvas Roll Grinding
• Drive Rod Assembly
Hankuk Paper
• Spool Roll, Felt Roll, Paper Roll Spindle Repair
• Inner Gate Roll Grinding, H-Cr Plating
• Wire Roll, Paper Roll, Guide Roll, etc.
Yuhan Kimberly
• Embossing Roll Grinding
• Anvil Roll, Drive Roll, Single Drum Grinding
Hansol Paper
• Calendar Roll, Backing Roll Grinding
Hanchang Paper
• Press Roll, etc.
LG Chem
• Hearth Roll for Film Grinding & Plating
• Mold Tie-Bar Plating
• Calendar Roll for HI-PET Line Grinding
Hanwha L&C
• Calendar Roll
Samyang Corporation
• Calendar Roll
Seotong Chemical
• PET Corona Roll Assembly Manufacturing and
Grinding
• P.R.S. Roll Assembly Manufacturing
• Elongation Roll Manufacturing
• Heating Roll Assembly Manufacturing, Grinding,
and Plating
Other
• Elongation Roll Manufacturing for Kawasaki
• Rolls for Heat Treatment for Hyosung
http://www.uskoreahotlink.com/products/manufacturing/precision-industrial-rolls-shafts/
http://www.uskoreahotlink.com/products/manufacturing/precision-industrial-rolls-shafts/ 10
Certifications
Annex Research Institute Venture BusinessHyundai Steel:
Supplier Award
ISO 9001 : 2008 ISO 14001 : 2004
Noise Suppression
Application PatentCarbon Steel Welding
Patent
Noise Suppressing
Rollers Patent
INNOBIZ Certificate
LPR Global, Inc.344 Bloor Street W, Suite #607 Toronto, ON M5S 3A7 Canada
www.lprglobal.com | www.uskoreahotlink.com
Tel: +1 416-423-5590
E-Mail: [email protected]