3&4*/ $5-0( - polres polyester · pre-6301 tab lse ortho tix 200-260 #3/100 rpm @23°c 12-16...

RESINCATALOG

G R O W Y O U R B U S I N E S S W I T H U S

POLYESTER RESINS

GELCOATS

P I GMENT PAS TE S

POLRES POLYESTERPOLYESTER RESINS - GELCOATS - PIGMENT PASTES

Polres Polyester Boya ve Kimya San.Tic.Ltd.Sti started the production of Polyester Resin in Turkey back in 2003 to bring new initiatives to the sector.

A well-established and professionally organized company, we are providing service for the various requirements of several industries. We have earned a reputation in global marketplace with reliable and trustworthy business organization. With the support of excellent R&D department and logistics, we have capabilities to give technical support and supply resin-based products to all over the world.

Our comprehensive program is in the polyester resin sector. We are a one of the leading provider of unsaturated polyester resins, gelcoats, pigment pastes.

a message from the ceo

GROW YOUR BUSINESS WITH US!

Easy to process and have very good physical properties especially when combined with fibre reinforcement. Finished products made of these polymers have become an integral part of our daily lives. QUALITY FROM OWN DEVELOPEMENT We provide high-quality products that are made and developed in our own facilities. We are custom oriented formula-makers to fulfill the desired specifications.

THE MAIN FEATURES OF THE UNSATURATED POLYESTER RESINS :

CONTENTSPOLYESTER RESINS

1-CASTING TYPE3-HAND LAY UP AND SPRAY UP

9-PULTRUSION9-CONTINUOUS LAMINATING

11-HOT PRESS SMC & BMC13-RTM/INFUSION

15-FILMANET WINDING17-CORROSION RESISTANT

19-ADHESIVE19-PUTTY TYPE

21-FLAME RETARDANT21-EPOXY VINYL ESTERS

23-SPECIAL RESINS

GELCOATS27-GENERAL PURPOSE

27-PERFORMANCE29-HIGH-PERFORMANCE

29-HIGH-PERFORMANCE MARINE31-SANDABLE

31-MOULD TYPE31-CHEMICAL RESISTANCE

31-FLAME RETARDENT31-BRIGHT TOPCOAT

Resin Name Resin Base Viscosity [mPa.s] Gel Time[ min.] Curing System Basic Properties Features Application

PRE-30 A Iso/NPG 1000-1200#3/20 rpm @25°C 10-12 @23 °C

1.5 mL % 50 MEK-P Pre-accelerated, medium

reactive, high viscosity Good chemical and heat resistance, excellent stain resistance

low shrinkage Solid surface

PRE-31 A NCS Ortho 1000-1200#3/20 rpm @25°C 14-17 @25 °C

2 mL % 50 MEK-PPre-accelerated, medium

reactive, high viscosity Rigid, good chemical and heat resistance high strength, low shrinkage,

UV resistance Breton Stone

PRE-3101 NCS Ortho 450-700#3/100 rpm @25°C 14-17

@25 °C0.2 mL %6 Co Oct2 mL % 50 MEK-P

Medium reactive, medium viscosity High filler acceptance, high strength Breton stone

PRE-3102 NCS Ortho 450-700#3/100 rpm @25°C 14-17

@25 °C0.2 mL %6 Co Oct2 mL % 50 MEK-P

Medium reactive, medium viscosity

High filler acceptance, high strength, UV resistance, smooth surfaces, low shrinkage Breton stone

PRE-32 Ortho 1200-1300#3/50 rpm @20°C 3-5

@23 °C0.2 mL %6 Co Oct2 mL %50 MEK-P

Medium reactive, high viscosity transparent Crack and craze resistance, good transparency, quick cure Clear casting

PRE-33 Ortho 1200-1300#3/50 rpm @20°C 4-6

@23 °C0.2 mL %6 Co Oct2 mL % 50 MEK-P

Medium reactive, high viscosity transparent Excellent transparency, crack and craze resistance, quick cure Clear casting

PRE-35 Ortho 500-700#3/50 rpm @20°C 5-7

@23 °C0.2 mL %6 Co Oct2 mL % 50 MEK-P

Medium reactive, medium viscosity, transparent

Accepts upto %80 filler such as calcium carbonate, aluminum hydroxide, dolomit and quartz Standard casting

PRE-36 Ortho 450-600#3/50 rpm @20°C 7-9

@20 °C0.25 mL %6 Co Oct1 mL % 50 MEK-P

Medium reactive, medium viscosity Good filler wet-out, fast cure, high filler acceptance, low shrinkage Polymer concrete

PRE-38 Iso 200-300#2/20 rpm @25°C 8-12

@25 °C0.25 mL %6 Co Oct

1.25 mL % 50 MEK-P

Medium reactive, low viscosity, resilient

Excellent filler wet-out, low shrinkage, good chemical resistance, higher mechanical strengths, low viscosity for high filler loading Polymer concrete

CASTING TYPE

Page 2Page 1

Polres Casting resins have higher physical properties and higher heat resistance. We offer ultimate strength, durability, and beauty for cultured marble, onyx and solid surface products at very low cost

Excellent resin for kitchen and bath countertops

FlexableBeautifulHigh Performance


PRE-03 TA OrthoTix

250-400#2/20 rpm @25 °C 15-20 @25 °C

1 mL % 50 MEK-P Resilient, thixotropic, low viscosity, pre-accelerated

Fast wet-out of chopped glass stands and easy rolling, high thixotropic index, fast trim and cure times, non-air-inhibited

Moulding of glass reinforced parts, using alumina hydrate as an extender

and fire retardant

PRE-60 Ortho 180-200#2/60 rpm @25 °C 25-30

@25 °C0.15 mL %6 Co Oct 1 mL % 60 MEK-P

Low viscosity, high reactive Fast curing and high filler of calcium carbonate, aluminium hydroxide, marble powder acceptance for casting and low volumetric shrinkage GRP, FRP and clear casting

PRE-63 Ortho 300-450#2/20 rpm @25 °C 5-8

@25 °C0.25 mL %6 Co Oct2 mL % 60 MEK-P

Medium viscosity, medium reactive Medium cure, good fiber wet-out, economical laminating resin GRP, FRP and laminating

PRE-63 TAB OrthoTix

500-600#2/20 rpm @25 °C 8-10 @25 °C

1 mL % 60 MEK-PThixotropic, medium reactive,

pre-accelerated with blue indicator, medium viscosity

Good fiber wet-out, low shrinkage, high filler acceptance,water resistant GRP, FRP and laminating

PRE-63 TAB HV OrthoTix

900-1000#2/20 rpm @23°C 10-15 @25 °C

1 mL % 60 MEK-PThixotropic, high viscosity, pre-accelerated with blue

indicator High filler acceptance, excellent wetting for fiber, good heat resistance, easy

rolling due to high viscosity GRP, FRP and laminating

PRE-70 TAB IsoTix

450-650#2/20 rpm @25 °C 14-25 @25 °C

1.25 mL % 50 MEK-PThixotropic, medium reactive,

pre-accelerated with blue indicator

Rigid, very good fiber wetting, chemical, heat and corrosion resistance Boat molds, marine gelcoat backup, chemical tanks

PRE-71 TA IsoTix

400-600#2/20 rpm @25 °C 9-15 @25 °C

1.25 mL % 50 MEK-P Thixotropic, medium reactive,

pre-accelerated Rigid, excellent chemical, heat and corrosion resistance, high heat distortion,

rapid cure and fast trim time, very good wet timeMilitary applications that require advanced specifications to meet

PRE-6300 Ortho 500-600#3/20 rpm @25 °C 5-7

@25 °C0.2 mL %6 Co Oct

1.25 mL % 50 MEK-PMedium reactive, medium

viscosity Medium cure, stable gel time, fast curing, excellent fiber wetting Manufacture big size composite parts

PRE-6300 TAB OrthoTix

290-340#3/100 rpm @23°C 18-30 @25 °C

1.25 mL % 50 MEK-P

Thixotropic, medium viscosity, medium reactive, pre-accelerated with blue

indicator

Thixotropic property allows application on vertical parts without the risk of sagging or drainage, rapid wetting, good and quick cure Fabrication of FRP marine craft

GRPHand Lay-upSpray-up

Page 4Page 3

Widely used for many years Simple principles to teach Low cost tooling Wide choice of suppliers and material types Higher fibre contents

Grp hand lay-up advantagesPolres has a broad product range availablefor hand lay up/spray up applications


PRE-6301 TAB LSE OrthoTix

200-260#3/100 rpm @23°C 12-16 @25 °C

1.5 mL % 50 MEK-P Thixotropic, pre-accelerated

with blue indicator, low viscosity Low styrene emission (LSE), fast cure General purpose laminating


290-340#3/100 rpm @23°C 19-21 @25 °C

1.5 mL % 50 MEK-P Thixotropic, pre-accelerated with blue indicator, medium

viscosity Medium-fast cure General purpose laminating


290-340#3/100 rpm @23°C 19-21 @25 °C


viscosity

Low styrene emission (LSE), its thixotropic structure prevents drainage when it's used on vertical surface with chopped stand

matGeneral purpose laminating


170-210#3/100 rpm @25°C 15-20 @25 °C

0.63 mL % 50 MEK-P Thixotropic, pre-accelerated

with blue indicator, low viscosity Low styrene emission (LSE), good fiber wet-out, medium cure, high

filler acceptance, water resistant Calcium carbonate filled lamination


200-250#3/100 rpm @23°C 22-25 @25 °C

1.25 mL % 50 MEK-P thixotropic, pre-accelerated

with blue indicator, low viscosity Medium cure, good fiber wet-out and low odour Suitable for indoor applications


320-360#3/100 rpm @25°C 18-25 @25 °C


viscosity Medium cure, high filler acceptance, excellent wetting for fiber,

good heat resistance, easy rolling FRP lamination


320-360#3/100 rpm @25°C 18-25 @25 °C


viscosityMedium cure, low shrinkage, low odour, good fiber wet-out FRP lamination


320-360#3/100 rpm @25°C 18-25 @25 °C


viscosity Low styrene emission (LSE), excellent fiber wet-out Large FRP boat manufacturing

PRE-6320 Ortho 450-500#2/20 rpm @25°C 7-9

@25 °C0.25 mL %6 Co Oct2 mL % 60 MEK-P

Medium reactive, medium viscosity Easy fiber wet-out, medium-fast cure FRP, GRP and clear casting applications,

manufacture big size composite parts

PRE-6321 Ortho 350-400#2/20 rpm @25°C 4-7

@25 °C0.25 mL %6 Co Oct2 mL % 60 MEK-P

High reactive, medium viscosity, transparent Low volume deformation, easy fiber wet-out Fast trim and serial production of FRP, GRP


Page 5

It is suitable for small to medium-volume parts. It is a very economical process for making small to large parts. It utilizes low-cost tooling as well as low-cost material systems.

Spray-up process offers the following advantagesPolres has a broad

product range available for Hand lay up and Spray up applications

Resin Name Resin Base Viscosity [mPa.s]

Gel Time

[ min.] Curing System Basic Properties Features Application


450-600#2/20 rpm @25°C 23-31 1.25 mL % 50 MEK-P

@25 °C

Thixotropic, pre-accelerated with blue indicator,

low styrene emission (LSE)High heat distortion, excellent fiber wetting and rolling, low odour GRP-FRP products with enhanced

mechanical and therma properties

PRE-7210 TAB LSE Iso/NPGTix

450-750#2/20 rpm @23°C 25-35 1.25 mL % 50 MEK-P

@25 °C

Thixotropic, pre-accelerated with blue indicator, medium

viscosityExcellent fiber wet-out, high corrosion resistant GRP-FRP products where high gloss and

corrosion resistant are required

PRE-52 TA OrthoTix

180-220#3/50 rpm @25°C 15-25 1 mL % 60 MEK-P

@20 °CThixotropic, pre-accelerated,

low viscosity, whiteHigh filler acceptance, excellent adhesion to acrylic and ABS sheet, easy

fiber wet-out, comparatively light, durable and economical Sanitary production

PRE-52 TAD OrthoTix

2000-3000#3/20 rpm @25°C 9-11 1.5 mL % 60 MEK-P

@25 °C Thixotropic, pre-accelerated,

white, filledExcellent adhesion to acrylic ABS sheet, easy wetting for fiber,

comparatively light, durable Sanitary production

PRE-52 TA LS OrthoTix

180-220#3/50 rpm @25°C 8-12 1 g % 60 MEK-P


low viscosity, white Low shrinkage (LS), white colour, high filling capacity, excellent adhesion to

acrylic and ABS sheet, rapid fiber wetting, UV durable Sanitary production

PRE-510 TA LS OrthoTix

100-200#3/50 rpm @25 °C 14-18 1.25 mL % 50 MEK-P


low viscosityLow shrinkage (LS), medium cure, rigid, high gloss, UV durable, high filler

acceptance Sanitary production

PRE-6500 TAB DCPDTix

350-550#2/20 rpm @23°C 22-26 2 mL % 50 MEK-P

@25 °C

Special DCPD structure, thixotropic, pre-accelerated

with blue indicator Low shrinkage, excellent fiber wet-out, low peak exotherm High surface quality composite parts

PRE-6501 TAB DCPDTix

340-450#2/20 rpm @23°C 18-22 2 mL % 50 MEK-P

@25 °C

Special DCPD structure, thixotropic, pre-accelerated

with blue indicatorLow shrinkage, excellent fiber wet-out, low peak exotherm High surface quality composite parts


Page 8

Creating the perfect shower tray is a lot easier with our envious selection of our acyrilic, ABS resins.

Creating the perfect shower trayPolres has a broad

product range available for Hand lay up and Spray up applications


PRE -75 Iso 1000-1200#3/50 rpm @25 °C 4-8

@20 °C0.2 mL %6 Co Oct2 mL 60 MEK-P

High reactive,high viscosity

High chemical resistance, very good moisture, stain and weathering resistance

Specially designed for pultrusion process; proven performance in appliances, electrical and

construction applications

PRE- 76 Iso 400-450#2/20 rpm @25 °C 4-7

@20 °C0.2 mL %6 Co Oct2 mL % 50 MEK-P

Medium reactive, low viscosity Rigid, excellent chemical and corrosion resistance, excellent fiber wet-out and superior surface quality

Specially designed for pultrusion and spray wind process

PRE-770 Ortho 350-400#2/20 rpm @25 °C 4-7

@25 °C0.25 mL %6 Co Oct2 mL % 60 MEK-P

High reactive, medium viscosity, clear Low volume scrinkage, easy wet-out For fast and serial production by pultrusion process

PRE-7000 Terephthalic 750-850#3/50 rpm @25 °C 7-9

@25 °C0.2 g %6 Co Oct2 g % 60 MEK-P

High reactive, medium viscosity High chemical strength, resistance to heat, corrosion and water, excellent fiber wetting capability

Production of organic and inorganic acid storage containers, automotive and construction industry


PRE -18 L Ortho 200-240#3/50 rpm @25 °C 4-6

@25 °C0.17 mL %6 Co Oct1 mL % 50 MEK-P

High reactive, low viscosity, light permeable

Excellent fiber wet-out, show exceptional gloss, fiber wetting good mechanical properties, good peak exotherm

Widely used in roofing sheets, domes and structural panels

PRE -20 L Ortho 200-240#3/50 rpm @25 °C 4-6 25 °C

1 mL % 60 MEK-PMedium reactive, low viscosity,

light permeable Good fiber wetting, exceptional gloss surface, UV stabillized Widely used in roofing sheets, domes and structural panels

PultrusionResins

Page 10Page 9

Low viscosity and long pot life Fast curing and excellent mechanical property High Tg(>100℃) and excellent heat

resistance Excellent bounding performance of glass and

carbon fiber It is suitable for pultrusion composites parts

High strength resin

Developed for high strength pulturion profiles

Con

tinuo

us L

amin

atin

g

FOR ROOFING SHEETS, DOMES AND STRUCTURAL PANELS

Good wetting properties Show exceptional gloss Resistance to yellowing Impact strength and mechanical properties

Resin Name Resin Base Viscosity [mPa.s] Gel Time


PRE-40 Ortho 1000-1200#3/50 rpm @20 °C 10-14

@23 °C0.2 mL %6 Co Oct2 mL % 60 MEK-P

High reactive, high viscosity Thicken well with magnesium oxide and cost effective resin Automotive, building and construction industry

PRE-41 Ortho 1000-1200#3/50 rpm @25 °C 10-12

@23 °C0.2 mL %6 Co Oct2 mL % 50 MEKP

High reactive, high viscosity Smooth, non-wavy and high gloss products, high colour homogeneity in pigmented systems

Automotive, building and construction industry

PRE-43 Iso 1500-1800#3/50 rpm @25 °C 10-12

@23 °C0.2 mL %6 Co Oct2 mL % 50 MEK-P

High reactive, high viscosity High HDT, increased mechanical properties, chemical resistant, low shrinkage Automotive, building and construction industry

PRE-44 Iso 3500-4000#3/20 rpm @25 °C 8-10

@23 °C0.2 mL %6 Co Oct2 mL % 50 MEK-P

High reactive, high glossMulti-purpose, high HDT, very good mechanical properties,

low shrinkage

Automotive, building and construction industry

Hot Press SMC and BMC Resins

Page 12Page 11

Polres SMC-BMC resins offers superior strength, electrical insulation and excellent flow characteristics

High reactive resins for smc-bmc applications

High quality surfaces for automotive and machine equipment SMC-BMC parts


PRE-45 A Ortho 140-160#2/60 rpm @20 °C 5-8 @20 °C 2 mL % 60 MEK-P High reactive, low viscosity

pre-accelerated Fast cure rates, fast wet-out, high quality smooth surface, high filler

acceptanceHigh-performance aerospace applications and

larger volume industrial applications

PRE-46 A Ortho 250-300#3/50 rpm @20°C 5-6 @20 °C 2 mL % 60 MEK-P Medium reactive, low viscosity

pre-accelerated Fast cure rates, moderate exotherm, economic, high filler acceptance RTM and cold molding applications

PRE-46 TA LSE OrthoTix

500-600#2/20 rpm @25°C 6-7 @20 °C 2 mL % 60 MEK-P Medium reactive, low viscosity,

thixotrophic, pre-accelerated

Low styrene emission (LSE), ideal resin for large composite parts with vertical surfaces Fishing boats, water slides, yachts and pools

PRE-48 DCPD 150-250#3/50 rpm @23 °C 10-20 @23 °C 1 mL % 60 MEK-P Medium reactive,

low viscosityLow volumetric shrinkage, high mechanical properties, high filler

acceptance Vacuum infusion or RTM processes

PRE-49 A Iso 230-260#3/50 rpm @25°C 7-9 @25 °C 2.0 mL % 60 MEK-P High reactive, pre-accelerated,

low viscosityGood mechanical strength, anti-corrosion toughness,

HDT and elongation, fast hardness Mild corrosion applications in marine and

industria markets

RTM/ Infusion ResinsLIGHT IN WEIGHTHIGH IN STRENGTH

Page 14Page 13

RTM RESINS WITH IMPROVED PROCESSABILITY AND PROPERTIES

Components made from Polres RTM resins have exceptional consistency ,superior finish and good mechanical strength, tooling flexibility, good surface quality, less material wastage, large and complex shapes, wide range of reinforcements and zero air entrapment within the product

Resin Name

Resin Base

Viscosity [mPa.s]

Gel Time[ min.] Curing System Basic Properties Features Application

PRE-64 Ortho 300-400#2/20 rpm @25 °C 10-15

@25 °C 0.25 g %6 Co Oct1.3 g % 50 MEK-P

Medium-high reactivity, low viscosity

Fast fiber wet-out, capable of accepting high filler loading, optimum cure and high mechanical properties,

water durable

General purpose filament winding products like pipes, tubes and street lights

PRE-65 Ortho 300-400#2/60 rpm @25 °C 10-20

@25 °C1 mL %6 Co Oct

1.1 mL % 60 MEK-P

Moderately reactive, low viscosity

Easy fiber wetting, good meachanical strength, economical resin, water durable Manufacturing of water pipes, street lights, etc.

PRE-67 Iso 300-400 #2/20 rpm @25 °C 8-12

@25 °C0.25 g %6 Co Oct1.5 g % 50 MEK-P

Low viscosity, medium-high reactivity

Rapid curing, easy air release, smooth and high gloss surfaces, excellent corrosion resistance, high mechanical and thermal

strength, low water absorption, high filler acceptance, hydrolytic stability

Corrosion resistant, high strength chemical tanks and pipes

PRE-68 Iso 400-450#2/20 rpm @25 °C 8-12

@25 °C0.25 g %6 Co Oct1.5 g % 50 MEK-P

Moderately reactive, low viscosity

Rigid, excellent chemical and corrosion resistance, excellent fiber wet-out and superior surface quality

High mechanical, quality and corrosion strength filament winding products

Filament Winding Resinssuitable to process composite partsrequiring precise tolerances

Page 16Page 15

In filament winding method, fiber strands are unwind and passed continuously to the resin tank. In resin tank, fiber strand are impregnated completely with the resin. Now, these resin impregnated strands are passed onto a rotating mandrel. These strands are wound around the mandrel in a controlled manner and in a specific fiber orientation.

Designed with excellent glass wet-out for the filament winding process

Resin Name Resin Base Viscosity [mPa.s]

Gel Time


PRE-70 TAB IsoTix

450-650#2/20 rpm @25 °C 14-25 @25 °C 1.25 mL % 50 MEK-P

Thixotropic, low viscosity,pre-accelerated with blue

indicator

Rigid, excellent mechanical strength, chemical resistance, very good fiber wetting

High chemical and high heat distortion resistance FRP applications

PRE-71 TA IsoTix

400-600#2/20 rpm @25 °C 9-15 @25 °C 1.25 mL % 50 MEK-P

Thixotropic, pre-accelerated, medium

viscosity, medium reactive

Fast trim time, rapid cure, excellent chemical, heat and corrosion resistance, very good fibe wet-out

Hand lay-up/spray-up, spray winding, centifigual casting

PRE-72 Iso 850-1050#2/20 rpm @25 °C 5- 7

@25 °C 0.2 mL %6 Co Oct 1 mL % 50 MEK-P

Resillient, medium reactive, high viscosity

High elongation, high flexural strength, strong chemical resistant, high filler acceptance Base resin for manufacturing gelcoats

PRE-73 Iso 700-800#3/50 rpm @25 °C 4-8

@20 °C0.2 mL %6 Co Oct2 mL % 60 MEK-P

Medium-high reactive, medium viscosity

Rigid, provides high elongation high flexural strenght, strong chemical resistant, accepts high filler loads

FRP fitting pipes , chemical tanks and marine

PRE-73 TAB Iso Tix

900-1000#2/20 rpm @23 °C 25-27 @25 °C 2.5 g % 50 MEK-P

High viscosity, thixotropic with blue indicator,

pre-accelerated

Good thermal and high mechanical properties, consistent gel and cure times Marine vessels and pipes

PRE-74 Iso 400-450#2/20 rpm @25 °C 15-20

@25 °C0.25 mL %6 Co Oct

1.25 mL % 50 MEK-P

Medium viscosity, medium reactive

Excellent chemical and corrosion resistance, good heat and physical properties

Automotive sector, water and waste water cleaning facilities, chemical process

facilities

PRE-75 Iso 1000-1200#3/50 rpm @25 °C 4-8

@20 °C 0.2 mL %6 Co Oct

2 mL 60 MEK-P

High reactive, high viscosity

Superior fiber wet-out, resistant to moisture, stain and weathering, excellent chemical resistance and colour stability

Appliances, electrical, construction and food storage

PRE-7208 TAB LSE Iso/NPG Tix

450-550#2/20 rpm @25 °C 25-35 @20 °C 1.25 mL % 50 MEK-P

Thixotropic, pre-accelerated with blue

indicator

Low styrene emission (LSE), rigid, excellent wetting and rolling properties, corrosion resistant, low odour Corrosion resistant FRP

PRE-7210 TAB LSE Iso/NPG Tix LSE

450-750 #2/20 rpm @25 °C 25-35 @25 °C 1.25 mL % 50 MEK-P

Thixotropic, pre-accelerated

with blue indicator

Low styrene emission (LSE), excellent surface quality, high gloss, wetting and easy rolling

High performance and high quality finished FRP products

PRE-7411 Iso 400-500 #2/20 rpm @25 °C 8-10 @25 °C 2 mL % 50 MEK-P Medium viscosity, medium

reactive Good water and chemical resistance, well fiber wet-out Chemical plant and containers, tanks, pipes

Corrosion Resistant

Page 18Page 17

Excellent corrosion resistance to a wide variety of corrosive elements

High mechanical properties with high tougness and crack resistance

High resistance against water / moisture Good surface tolerance and adhesion Excellent wetting for fiber Good final cure

designed to give maximum corrosion protection

We offer proven, durable performance for a world of end-uses such as pipe, tanks, water and wastewater treatment, chemical processing, cooling towers, pulp and paper, mining and power generation

Resin Name Resin Base Viscosity [mPa.s]Gel

Time[ min.]

Curing System Basic Properties Features Application

PRE-21 Ortho 800-1200#3/50 rpm @25 °C 8-12

@25 °C0.25 mL % 6 Co Oct2 mL % 50 MEK-P

High reactive, high viscosity Rigid, fast curing, fast sanding, excellent adhesion, no cracking or shrinage during hardening

Production of synthetic abrassive stone, marble adhesive

PRE-22 DCPD 800-1200#3/50 rpm @25°C 8-10 @25 °C 2 g BPO Medium reactive, medium

viscosity

High filler acceptance, resilient, excellent adhesion and high strength, excellent weatherability, resistant to alkalis, diluted acid solutions and

U.V.

Bonding and marble adhesive applications

Resin Name Resin Base Viscosity [mPa.s]Gel

Time[ min.]

Curing System Basic Properties Features Application

Polres UPE DCPD 500-550#3/50 rpm @20°C 12-16 @20 °C 2 g BPO Medium reactive, medium

viscosityHigh filler acceptance, easily sandable, resilient, excellent adhesion

and high strength Car repair putty

Polres GMP DCPD 500-550#3/50 rpm @20°C 10-16 @20 °C 2 g BPO Low reactive, medium

viscosityHigh filler acceptance, easily sandable, enhanced flexibility, excellent adhesion and high strength polyester repair putty Galvanized surface adhesion

Powerful AdhesiveResins

Page 20Page 19

Our high strength adhesive resin has been specially formulated as a high-performance

High strength formula

When you need a powerful adhesive to bond stone, look no further than Polres high performing adhesives for stone

Putty

Type

Polres putty resins are suitable for a variety of uses, specially to repair car bodyworks, boats, fill and assemble glass wool products.

Good adhesion on almost all metal surfaces including aluminium and mild steel

Adh

esiv

e

v


PRE-1622 FR Ortho 350-500#2/20 rpm @25 °C 6-10 @25 °C 2 mL 50 MEK-P Halogenated, clear, high

reactive, medium viscosityNo filler, contains halogen, high LOI (Limit Oxygen Index) value,

very good fiber wetting

RV panels and components, prefabricated house panel and parts, yacht and boat

components

PRE-1623 FR Ortho350-500

#2/20 rpm @25 °C 6-10 @25 °C 2 mL 50 MEK-P Halogen-free clear, high reactive, medium viscosity

No filler, non-halogenated, high LOI (Limit Oxygen Index), easy fiber wet-out

RV panels and components, prefabricated house panel and parts, yacht and boat

components

PRE-1624D FR Ortho1300-1800

#2/20 rpm @25 °C 6-10 @25 °C 2 mL 50 MEK-PMedium reactive, high viscosity, halogen free,

pre-accelerated,

Contains filler, non-halogenated, high LOI (Limit Oxygen Index),economical GRP products that satisfy flame retardancy

PRE-1625 FR Ortho350-500

#2/20 rpm @25 °C 6-10 @25 °C 2 mL 50 MEK-P HET acid based, high reactive, medium viscosity No filler, halogenated, high LOI (Limit Oxygen Index) Flame retardant transparent GRP parts

PRE-4824D FR Ortho1300-1800

#2/20 rpm @25 °C 10-18 @25 °C 2 mL 50 MEK-PMedium reactive, high viscosity, halogen free,

pre-accelerated,Fillled, halogen-free, high LOI (Limit Oxygen Index) GRP products that satisfy flame retardancy

Resin Name Type Viscosity [mPa.s] Gel Time[ min.] Curing System Basic Properties Features Application

PVES 901 Bisfenol A 200-240#3/50 rpm @25 °C 10-15 10-20

@25 °C0.17 mL %6 Co Oct1 mL % 50 MEK-P

It provides excellent corrosion resistance to a broad range of organic and inorganic acids, alkalis, oxidizing

chemicals and salt solutions etc. It also provides very good mechanical strength such as tensile and flexural while

incorporated with reinforcement such glass fiber, carbon fiber or kevlar fiber etc.organic and

Chemical storage tanks, pipes, flue gas desulfurization systems(FGD), scrubbers, ducts. Corrosion resistant flooring while

incorporated with aggregates. Waste water treatment systems. Food storage tanks and

pure water system. Marine use for yachts and boats

PVES 901 N Novalac 500-600 #3/50 rpm @20 °C 60-90 4-6 @25 °C 1 mL % 60 MEK-P

Low styrene content (37%). Low foam curing is possible with standard MEKP peroxides and shows excellent fiber

wetting.It provides excellent corrosion resistance to a broad range of organic and inorganic acids, alkalis,

oxidizing chemicals andsalt solutions etc. It also provides very good mechanical strength such as tensile and flexural

Chemical storage tanks, pipes, flue gas desulfurization systems (FGD), scrubbers, ducts. Corrosion resistant flooring while

incorporated with aggregates. Waste water treatment systems. Food storage tanks and

pure water system

PVES 907-1 Bisfenol A 335±65#3/60 rpm @25 °C 10-15 20-30

@25 °C0.4 mL %26 Co Oct0.05 mL %100 DMA 1.2 mL % 50 MEK-P

It combines superior retention of mechanical properties at high temperature, such as tensile and flexural strength, and

superior corrosion to chemical mixture,oxidizing, chemicals and solvents etc.

Chemical storage tanks, pipes, flue gas desulfurization systems (FGD), scrubbers, ducts. Corrosion resistant flooring while

incorporated with aggregates. Equipment specified to handle mixture of air, exhaust

gases or potentially flammable liquids

Flame Retardant Resins

Page 22Page 21

High Performance resin for low flame / low smoke applications

FR resinFor advanced technology, non-halogenated parts production

v

Expo

xy V

inyl

Est

er R

esin

s


PRE-01 TA Ortho Tix

300-500#2/20 rpm @25 °C 5-8 @25 °C, 2 mL % 60 MEK-P Thixotropic, pre-accelerated,

high reactive, low viscosity

Low volumetric shrinkage, fast fiber wet out, high resistance to possible compulsions during mould production, fast hardness, excellent physical

strengthTooling & mold manufacturing

PRE-02 TA Iso Tix

300-550#2/20 rpm @25 °C 5-8 @25 °C, 2 mL % 60 MEK-P Thixotropic, pre-accelerated,

high reactive, low viscosity

Low volumetric shrinkage, fast fiber wet out, high resistance to possible compulsions during mould production, fast hardness development,

corrosion resistance and excellent physical strengthTooling & mold manufacturing

PRE-2000 Saturated 1500-2000#3/20 rpm @25 °C - - High viscosity, styrene-free,

transparentExcellent wet-out of pigments, very good chemical and mechanical

resistance Grinding vehicle for pigments

PRE-2001 Saturated 1200-1800 #2/20 rpm @25 °C - - High viscosity, styrene-free,

transparent Excellent wet-out of pigments, non-plastizable resin Grinding vehicle for pigments

PRE-2002 Saturated 2000-3000 #3/20 rpm @25 °C - - Very high viscosity, styrene-free,

transparent Excellent wet-out of pigments, non-plastizable resin Grinding vehicle for pigments

PRE-4000 Ortho 2500-3500 #3/20 rpm @25 °C 13-17

@25 °C0.2 mL %6 Co Oct1 mL % 50 MEK-P

High reactive, high viscosity High heat distortion, good heat strength and stable gel time Base resin for preparation of laminating resins and gel coats

PRE-4001 Ortho 2500-3500#3/20 rpm @25 °C 13-17

@25 °C0.2 mL %6 Co Oct1 mL % 50 MEK-P

High reactive, high viscosity High flexibility, resistance against crackings and crazing Base resin for preparation of laminating resins and gel coats

PRE-4002 Iso 1100-1400 #3/20 rpm @25 °C 9-14

@25 °C0.4 mL %6 Co Oct

1.25 mL % 50 MEK-P High reactive, high viscosity High flexibility, good chemical resistance, highly resitant to crackings and crazing, high elongation and high flexural strength

Base resin for gel coats to produce sanitary ware, cooling tower, chair, bathtub, tank

PRE-53 Ortho 1000-1200#3/50 rpm @20 °C 3-5

@20 °C0.2 mL %6 Co Oct2 mL % 60 MEK-P

Medium reactive, medium viscosity Excellent dying properties, clear, high gloss Buttons and jewellery

PRE-54 Ortho 1200-1300 #3/50 rpm @20 °C 4-6

@20 °C0.2 mL %6 Co Oct2 mL % 60 MEK-P

Medium reactive, medium viscosity High gloss, clear, resistance to crack and craze Buttons and jewellry

PRE-54 T Ortho Tix

1650-1750 #3/50 rpm @20 °C 7-8

@20 °C0.2 mL %6 Co Oct2 mL % 60 MEK-P

Thixotropic, medium reactive, high viscosity Easy to shape, flexible, resistance to crack and craze Rod button

Special Resins

Page 24Page 23

Next to generic and standard resin systems, Polres offers a wide range of special resin system that would fulfil specific requirements

meets advanced production processes

Special resin products include: Tooling-Mold making, saturated, gelcoat base, button and flexible resins



PRE-55 Ortho 900-1000 #3/50 rpm @20 °C 4-6

@20 °C0.2 mL %6 Co Oct2 mL % 60 MEK-P

Medium reactivity, medium viscosity

High resistance to crack and craze at high rpm centrifugal casting applications

First quality buttons, rosaries, trinkets, souvenirs, jewelery

PRE-55 T Ortho Tix

1450-1550#3/50 rpm @20 °C 7-9

@20 °C0.2 mL %6 Co Oct2 mL % 60 MEK-P

Thixotropic, medium reactivity, high viscosity

High gloss, easy to shape, flexible, resistance to crack and craze Rod button

PRE-89 SR Ortho 300-350#3/50 rpm @25 °C 10-15

@25 °C0.2 mL %6 Co Oct2 mL % 60 MEK-P

Low reactivity, medium viscosity Resistance to cracking and crazing, clear Suitable to use blend resins to increase their

flexibility

PRE-90 SR Ortho 350-500#3/50 rpm @25 °C 60-90 @25 °C

0.4 mL %6 Co Oct1 mL % 50 MEK-P

Low reactivity, medium viscosity

High resistanceto cracking and crazing, clear, high elongation, high flextural strength

Blending resin to ensure flexibility and anti-craking to the matrix e.g. gelcoat blending,

casting resin softening

HIGH FLEXIBLE RESINS

Page 26Page 25

Good adhesion to metalHigh hardness, corrosion and abrasion resistanceBoiling water resistanceSterilization resistance

Saturated Resins

Excellent flexible toughness Control reaction time with accelerator High tear strength and excellent

abrasion resistance Precise composition High bonding properties High-temperature durability


PRE-300 TT Ortho spray-up

3000-4000#5/20 rpm @25 °C 6-10 @25 °C 2 mL % 60 MEK-P Clear, medium reactive,

thixotropic, pre-accelerated

Good anti-sagging, triping and wrinkling resistance, excellent weathering resistance, high gloss retention, high degree of flexibility

and toughness

Kitchen tubs, shower units, utility boxes, spoilers, game parks, truck trailers, cooling

towers

PRE-300 FT Ortho brush

5000-7000#5/20 rpm @25 °C 5-8 @25 °C 2 mL % 60 MEK-P Clear, medium reactive,

thixotropic, pre-accelerated

Highly resistant to pre-release, good anti-sagging, triping and wrinkling resistance, excellent weathering resistance, high gloss

retention, high degree of flexibility and toughness

Kitchen tubs, shower units, utility boxes, spoilers, game parks, truck trailers, cooling

towers


3500-4000#5/20 rpm @25 °C 6-10 @25 °C 2 mL % 60 MEK-P White, thixotropic, medium

reactive, pre-accelerated


and toughness

Automotiveparts, bath equipments, artificial marble, spoiler, cabins, interior decoration, game parks, truck trailers and similar areas


6000-8000#5/20 rpm @25 °C 7-9 @25 °C 2 mL % 60 MEK-P

Medium reactive, white, thixotropic,

pre-accelerated


and toughness

Automotive parts, bath equipments, artificial marble, spoiler, cabins, interior decoration, game parks, truck trailers and similar areas


3000-4200#5/20 rpm @25 °C 7-12 @25 °C 2 mL % 60 MEK-P

high reactive, thixotropic, pre-accelerated,

transparent

Increased chemical resistance, smooth, non-wavy and glossy products, good pigmentability Automotive and construction industry


5000-7000#5/20 rpm @25 °C 5-8 @25 °C 2 mL % 60 MEK-P

high reactive, thixotropic, pre-accelerated,

transparent

Increased chemical resistance, smooth, non-wavy and glossy products, provide very high colour homogeneity in pigmented

systems, good pigmentabilityAutomotive and construction industry


5000-8000#5/20 rpm @25 °C 7-12 @25 °C 2 mL % 60 MEK-P high reactive, thixotropic,

pre-accelerated, white


and toughness, optimum resistance against UV Automotive and construction industry


3500-4200#5/20 rpm @25 °C 6-10 @25 °C 2 mL % 60 MEK-P high reactive, thixotropic,

pre-accelerated, white

Good anti-sagging, triping and wrinkling resistance, excellent weathering resistance, high gloss retention, high degree of

flexibility and toughness, optimum resistance against UVAutomotive and construction industry

GELCOATS

Page 28Page 27

High end marine applications from high performance speed boats to luxury yachts.By coating the outer surfaces of composite parts, they provide a smooth, bright and vivid look. They increase the resistance against chemicals, atmospheric conditions and impacts.

Gen

eral

Pur

pose

Perfo

rman

ce



PRE-09 TT Iso spray-up

3000-4200#5/20 rpm @25 °C 9-12 2 mL % 60 MEK-P, @25 °C Pre-accelerated, clear,

high reactive, thixotropic High resistance to chemicals, yellowing, UV, water, good gloss retention GRP, sanitary and marine applications where resistance to water and blistering

are needed

PRE-09 FT Iso brush

5000-8000#5/20 rpm @25 °C 7-11 2 mL % 60 MEK-P, @25 °C Pre-accelerated, clear, high

reactive, thixotropic High resistance to chemicals, yellowing, UV, water, good gloss retentionGRP, sanitary and marine applications

where resistance to water and blistering are needed

PRE-11 TT Iso spray-up

3000-4000#5/20 rpm @25 °C 9-12 2 mL % 60 MEK-P, @25 °C Pre-accelerated, white,

high reactive, thixotropic High resistance to chemicals and yellowing, excellent UV resistance, very

good osmosis resistanceMarine, land transport, building and

general moulding requirements

PRE-11FT Iso brush

5000-8000#5/20 rpm @25 °C 7-11 2 mL % 60 MEK-P, @25 °C Pre-accelerated, white, high

reactive, thixotropic Excellent UV resistance, very good osmosis resistance, good weather

resistance, low yellowing and excellent mechanical valuesMarine, land transport, building and

general moulding requirements

PRE-13 TT Iso/NPG spray-up

3500-4200#5/20 rpm @25 °C 7-12 2 mL %60 MEK-P, @25 °C

Pre-accelerated,, clear high reactive, thixotropic Maximum performance for chemical, mechanical and atmospheric

resistance

Automotive parts, military applications, sanitary equipment, artificial marble, kitchen tops, bath equipments etc.

PRE-13 FT Iso/NPG brush

5000-9000#5/20 rpm @25 °C 7-12 2 mL % 60 MEK-P, @25 °C Pre-accelerated, clear, high

reactive, thixotropic Maximum performance for chemical, mechanical and atmospheric

resistance

Automotive parts, military applications, sanitary equipment, artificial marble, kitchen tops, bath equipments etc.


3500-4200#5/20 rpm @25 °C 7-12 2 mL %60 MEK-P, @25 °C Pre-accelerated, white, high

reactive, thixotropic Improved resistance to sea waterExternal & marine environments, as well as agricultural, industrial and bath tub

manufacturing.


5000-9000#5/20 rpm @25 °C 7-12 2 mL % 60 MEK-P, @25 °C Pre-accelerated, white, high

reactive, thixotropic Improved resistance to sea water External & marine environments, as well

as agricultural, industrial and bath tub manufacturing


3000-4200#5/20 rpm @25 °C 9-12 2 mL % 60 MEK-P, @25 °C Pre-accelerated, thixotropic,

clear Resistant to yellowing, cracking, matting and blistering by time

due the impacts of atmospheric conditions, sea water and sunlight

Marine applications where bright color, flexibility, hydrolytic, chemical,

mechanical and atmospheric resistance are required


5000-8000#5/20 rpm @25 °C 7-11 2 mL % 60 MEK-P, @25 °C

Pre-accelerated, thixotropic,

clear

Resistant to yellowing, cracking, matting and blistering by time due to the impacts of atmospheric conditions, sea water and sunlight




3000-4000#5/20 rpm @25 °C 9-13 2 mL % 60 MEK-P, @25 °C Pre-accelerated, thixotropic,

white,


Marine applicationswhere bright color, flexibility, hydrolytic, chemical,



6000-8000#5/20 rpm @25 °C 9-13 2 mL % 60 MEK-P, @25 °C

Pre-accelerated, thixotropic white




High Performance Gelcoats

Page 30Page 29

Provides UV and scratch resistance, minimal gloss fading and thermal shock resistance

High resistance products

High performance and excellent quality compared to other gel coats on the market.

High

Per

form

ance

Mar

ine

High

Per

form

ance


PRE-200 TT Bisphenol

based spray-up

3000-4000#5/20 rpm @25 °C 9-10 2 mL % 60 MEK-P, @25 °C Thixotropic, pre-accelerated,

transparent High chemical and heat resistance Chemical storage tanks, corrosion resistance surface coatings, mould

production, yachts and other sea vessels

PRE-200 FTBisphenol

based spray-up


transparent High chemical and heat resistance Chemical storage tanks, corrosion resistance surface coatings, mould


PRE-210 TTBisphenol

based spray-up


whiteSuitable for paint drying oven high temperature strength

sandable gelcoat including pigment pastes

Chemical storagetanks, corrosion resistance surface

coatings, mould production, yachts and other sea vessels

PRE-210 FTBisphenol

based spray-up


white Suitable for paint drying oven high temperature strength

sandable gelcoat including pigment pastes

Chemical storage tanks, corrosion resistance surface coatings, mould



3000-4000#5/20 rpm @25 °C 10-15 2 mL % 60 MEK-P, @25 °C High reactivity, thixotropic,

transparent, pre-accelerated

Optimal flexibility and stroke resistance, high resistantance to destruction effects of release agents and styrene on the

mould surface during production

Production of moulds which is used in polyester materials production


6000-9000#5/20 rpm @25 °C 10-15 2 mL % 60 MEK-P, @25 °C High reactivity, thixotropic,

transparent, pre-accelerated

Optimal flexibility and stroke resistance, high resistantance to destruction effects of release agents and styrene on the

mould surface during production

Production of moulds which is used in polyester materials production


3500-4200#5/20 rpm @25 °C 8-12 2 mL % 60 MEK-P @25 °C

Medium-high reactivity, filled, thixotropic, pre-

accelerated

Excellent sandability and processability, fast cure, good elongation , cracking resistance Conventional sanding applications


9000-12000#5/20 rpm @25 °C 7-9 2 mL % 60 MEK-P, @25 °C

Medium-high reactivity, filled, thixotropic, pre-

accelerated

Excellent sandability and processability, fast cure, good elongation with cracking resistance Conventional sanding applications


3500-4200#5/20 rpm @25 °C 9-12 2 mL % 60 MEK-P, @25 °C

High reactivity, filled, thixotropic,pre-accelerated

Suitable for paint drying oven, high temperature strength sandable gelcoat including pigment pastes

Automotive industry, cabins, machine parts, manufacturing front, back and roof

panels of buses, trucks, cabins


9000-12000#5/20 rpm @25 °C 7-11 2 mL % 60 MEK-P, @25 °C High reactivity, filled,

thixotropic, pre-accelerated Suitable for paint drying oven, high temperature strength sandable

gelcoat including pigment pastes

Automotive industry, cabins, machine parts, manufacturing front, back and roof

panels of buses, trucks, cabins



filled High flame retardant technology and produced for the flame, fire and

spark risk applications Flame, fire and spark risk applications



filled High flame retardant technology and produced for the flame, fire and

spark risk applications Flame, fire and spark risk applications


3800-4200#5/20 rpm @25 °C 7-10 2 mL % 60 MEK-P, @25 °C Thixotropic, pre-accelerated High level of chemical and heat resistance characteristics,

very smooth, excellent brightnessCoating the outer surface of bijouteri

materials and buttons

Gelcoats

Page 32Page 31

High performance chemical resistance and weathering resistance swimming pools

High performance swimming pools

Polres Chemical resistance not effected by most chemicals even at high temperatures

S

anda

ble

Che

mic

al

Mol

d Fl

ame

Topc

oat

Building The Future

Together!

GEPOSB 12. Cd. No:8. Gebze/Kocaeli TR 41400 TURKEY Phone:+90 (262) 751 07 24 Fax:+90 (262) 751 33 30

Website: www.polrespolyester.com Email: [email protected]

3&4*/ $5-0( - polres polyester · pre-6301 tab lse ortho tix 200-260 #3/100 rpm @23°c 12-16...

Documents