Marine Roof Installation Instructions Hollandia Marine Sliding Roof 1 Flyscreen and sunblind 05/2008 3390697A

Webasto AG, Global Comfort Solutions © 2008 All Rights Reserved 1

Hollandia Marine Sliding Roof 1 Installation Instructions Doc.no.: Date:

3390697A

09-May-2008

Needed parts:

Screen Mounting plates

Installation:

1a Place the parts on a flat surface with untangled wires. (Please note that you are looking at the bottom side of the screen)

1b Detail untangled wires.

Webasto AG, Global Comfort Solutions © 2008 All Rights Reserved 2

Hollandia Marine Sliding Roof 1 Installation Instructions Doc.no.: Date:

3390697A

09-May-2008

1c Detail untangled wires.

1d Detail untangled wires.

1e

Detail untangled wires.

2a Slide the Front Part in the direction of the Arrow into the Side Guide.

Webasto AG, Global Comfort Solutions © 2008 All Rights Reserved 3

Hollandia Marine Sliding Roof 1 Installation Instructions Doc.no.: Date:

3390697A

09-May-2008

2b Slide the Front Part in the direction of the Arrow into the Side Guide.

2c Slide the Front Part in the direction of the Arrow into the Side Guide. Do the same for all corners.

3a

Fix the Mounting Plates in the required position in the roof of your Ship. They are only needed for the Front and Rear Parts.

3b

The Front and Rear Parts should snap onto the Mounting Plates.

Webasto AG, Global Comfort Solutions © 2008 All Rights Reserved 4

Hollandia Marine Sliding Roof 1 Installation Instructions Doc.no.: Date:

3390697A

09-May-2008

4a

After you have mounted the assembled Screen onto place in the Ship you can tension the wires by moving the Tensioning Block in the direction of the Arrow

4b

Do the same for the white wire.