31032011_approved vendor and subcontractor list

19
------------------------------------------------------------------------------------------------------------------------------------------------------ Page 1 of 19 HORIZON JEBEL ALI TERMINALS LIMITED (HJTL) DUBAI, U.A.E. PROJECT FALCON: BULK LIQUID TERMINAL IN JAFZA & JETFUEL PIPELINE TO DIA TENDER DOCUMENTS FOR ENGINEERING, PROCUREMENT AND CONSTRUCTION OF PHASE 1 DOC. NO.: P/HJTL/078/2011 SECTION F ANNEXURES

Upload: anand-ram

Post on 03-Dec-2014

846 views

Category:

Documents


15 download

TRANSCRIPT

------------------------------------------------------------------------------------------------------------------------------------------------------

Page 1 of 19

HORIZON JEBEL ALI TERMINALS LIMITED (HJTL)

DUBAI, U.A.E.

PROJECT FALCON: BULK LIQUID TERMINAL IN JAFZA & JETFUEL

PIPELINE TO DIA

TENDER DOCUMENTS FOR

ENGINEERING, PROCUREMENT AND CONSTRUCTION OF PHASE 1

DOC. NO.: P/HJTL/078/2011

SECTION F

ANNEXURES

------------------------------------------------------------------------------------------------------------------------------------------------------

Page 2 of 19

HORIZON JEBEL ALI TERMINALS LIMITED (HJTL)

DUBAI, U.A.E.

PROJECT FALCON: BULK LIQUID TERMINAL IN JAFZA & JETFUEL PIPELINE TO DIA

TENDER DOCUMENTS FOR

ENGINEERING, PROCUREMENT AND CONSTRUCTION OF PHASE 1

SECTION F, ANNEXURES

ANNEXURE VI: APPROVED VENDOR & SUB CONTRACTOR LIST

Notes:

1. All materials shall be of North American, Japanese, Europe only, except for

deviations mentioned in the list below. For Carbon steel plates & pipes South

Korea, South Africa and Saudi Arabian origin may also be considered.

2. In case of deviations, if any to the below list, shall be highlighted in the tender

offer for Employer’s evaluation.

3. If the item is not listed below,, the Contractor shall obtain prior approval for any

Vendor from Employer’s Representative

4. Contractor shall follow the approved vendor list for procurement and supply of

material to the extent possible. Supply, acceptance and installation of any

alternative Product / Vendor shall be subject to prior approval of the Employer

/ Employer’s Representative (Refer Note:5).

5. Tenderer may propose alternate Vendors along with the bid for consideration.

Alternate proposals shall be from reputed Manufacturers/experienced Vendors

in the field/material considered, for minimum of last ten years. Tenderer will be

required to submit all necessary documentary evidence/credentials as

required by the Employer for pre-qualification / verification leading to approval

of Vendor. Tenderer may also be required to arrange for inspection of the

proposed Vendor’s facility by Employer / Employer’s Representative, if

required.

Bids received with no deviation stipulated for the above list will be considered

as acceptance of the approved vendor and sub-contractor list and no

deviation will be permitted after award of contract.

A. List of Approved Vendors :Mechanical & Piping Works :

Item

No. Description Manufacturer Country of Origin

1 Air Compressor Atlas Copco Sweden

Kaeser USA

Ingersoll Rand USA

2 Ball Valves

Borsig Germany

Crane UK / USA

Grinnel / Hindle UK / USA

J.C. Fluid Flow FZE UAE

Kitz Japan

------------------------------------------------------------------------------------------------------------------------------------------------------

Page 3 of 19

Item

No. Description Manufacturer Country of Origin

ECON Netherlands

Klinger USA

Neles Jamesburg UK

OMB Italy

Orbit Valves UK

Walworth USA

Tyco Italy

SWI Korea

Virgo Italy

Sern France

3 Butterfly Valves (Triple

eccentric metal seated

Zero leakage)

Crane USA/UK

KSB Italy

Orbit USA

Vanessa Italy

Tomoe Japan

Orion Europe

Tyco Italy

Virgo Italy

Wallworth USA

4 Check Valves Crane UK / USA

Flowcheck UK

Goodwin UK

Grinnel / Hindle UK / USA

Hattersley Heaton UK

J.C. Fluid Flow FZE UAE

Walworth USA

KITZ Japan

KTM Japan

Lazaro Ituarte Spain

Muller Canada / USA

Orion Italy

Stockham Triangle U.K.

Valvosider Italy

Velan Canada

TYCO Italy

5 Control Valves Brooks Valves UK

Fisher Emerson USA /Europe

Smith Valves Germany

Tyco Italy

Flowserve Italy / USA

6 Double Block & Bleed Valve

/ Twin Seal Valve

General/Orbit USA

Tyco Italy

------------------------------------------------------------------------------------------------------------------------------------------------------

Page 4 of 19

Item

No. Description Manufacturer Country of Origin

7 Fire-Protection Equipment Angus UK

Chemguard USA

Saval NETHERLANDS

SKUM Sweden

8 Flame Arrestors Protego Germany

Groth USA

Whessoe Varec Italy

Sand & Jurs USA

9 Flanges Akahagi Flange Japan

Bebitiz Germany

FAD Flange Italy

Geldbech Germany

Loire Industrie France

Melesi Italy

Metalfar Italy

MGI France

Nicola Galperti &

Figlio Italy

Seo Koatsu Japan

Shimoda Iron Works Japan

The Rokude Japan

Ulma Forja Spain

Wilhelm Geldbech Germany

10 Flexible Fuel Piping Nupigec Italy

OPW USA

UPP UK

11 Fuel Dispensing Unit – Gas

Oil

Gilbarco Veeder

Root USA

Wayne Pumps USA

12

Gate Valves

Crane UK / USA

Grove Italy

Hattersley Heaton UK

J.C. Fluid Flow FZE UAE

KITZ Japan

ECON Netherlands

KTM Japan

Lazaro Ituarte Spain

Malbranque France

Orion Italy

Walworth USA

Valvosider Italy

Velan Canada

Tyco Italy

Virgo Italy

------------------------------------------------------------------------------------------------------------------------------------------------------

Page 5 of 19

Item

No. Description Manufacturer Country of Origin

13 GRE Tanks, Pipes & Fittings

(Underground)

Gulf Eternit UAE

Amiantit Saudi Arabia

14 Hammer Blind

Fetterolf USA

Sammi Korea

Strahman Vlaves Inc USA

15 Level gauge-Mechanical

(Float Type)

Schand & Jurs USA

Krohne Germany

Mobrey Emerson USA

Whessoe Varec Italy

Klinger Austria

16 Oil Water Separator –

Coalescer Plate type

Brentwood Industries USA

Facet International USA

Hydrasep Inc USA

Klargester UK

Hydro-Flo

Technologies USA

Kingspan

Environmental UK

Pacific Marine USA

Pan America

Environmental USA

K-pack Netherlands

17 Paint Ameron

Hempels

International Paints

Jotun

Leighs Paints

Sigma

18

Pig Launcher Quick Closures

/ Pig Alert / Insulating joints

Pipeline Engg &

Supply Co UK

Perry Equipment

Corpn

Forain S.R.L Italy

Oil States Industries

Inc USA

T.D. Williamsons USA

19 Pipe (Carbon Steel)

Avesta Sheffield Sweden

Bentler Germany

Bergrohr Germany

British Steel Corpn UK

Dalmine SPA Italy

DMV France

Hyundai - Hysco Korea

Eisembau Kramer Germany

Europipe Germany

------------------------------------------------------------------------------------------------------------------------------------------------------

Page 6 of 19

Item

No. Description Manufacturer Country of Origin

General Sider Italiana Italy

Kwasaki Japan

Mannesmann Germany, Brazil

Nippon Steel Japan

NKK Corp Japan

Osaks Tokushu Japan

Pietra Italy

Siderca Argentina

Sumitomo Metals Japan

Tamsa Mexico

US Steel USA

Vallourec

International / Starval France

Wemarenberg Germany

Zeljezara Sisak Croatia

Arabian Pipes Saudi Arabia

Tubos Italy

Seah Korea

Husteel Korea

20 Pipe (Stainless Steel) Avesta Sandwik Sweden

Bentham

International UK

British Steel Corpn UK

Butting Germany

Dalmine Italy

Mannesmann Germany

Marubeni Itoctru Steel Japan

Nippon Steel Japan

NKK Corp Japan

RGB/Eurotube UK

Sterling Tube UK

Sumitomo Metals Japan

Vallourec

International France

Posco Korea

Tubacex Spain

21 Pipe Fittings

Awaji Sangyo K.K. Japan

Benkan Corp. Japan

BKL U.K.

BSL France

Chero France

Coprosider Italy

Delcore / Deltinox France

ERNE Austria

------------------------------------------------------------------------------------------------------------------------------------------------------

Page 7 of 19

Item

No. Description Manufacturer Country of Origin

Gam Raccordi Italy

Geldbach Germany

IRC Italy

Interfit France

Metalfar Italy

Korea Flange Korea

Ladish USA

Ulma Spain

OMR Italy

Reccordi Forgiatti Italy

Sumikin Kikoh Co. Ltd Japan

Technoforge Italy

Tecnobend Italy

Tectubi Italy

Thyssen Stahlunion Germany

Toyo Fitting Co. Ltd Japan

Vallourec / Interfit France

Vanleeuwen NETHERLANDS

JD France

22

Plates (Carbon Steel) Arcelormills Europe

Charleroi Belgium

Corus UK

Posco Korea

Illyich Ukraine

Dongkuk Korea

Alchevsk Steel Mill Ukraine

Ruukki Finland

Mittal Steel S. Africa, Romania

Dillinger Hutte Germany

GTS France

HIGHVELD South Africa

ISCOR South Africa

Kwasaki Corporation Japan

Nippon Steel Japan

23 Pressure reducing Valve-Fire

Service (to be UL listed)

CLA-VAL USA

OCV Control Valves USA

Tyco USA

Emerson USA

Viking Corp USA

Watts ACV USA

24 Pumps- Centrifugal Type

Product Pumps

Flowserve France

Gorman Rupp USA

------------------------------------------------------------------------------------------------------------------------------------------------------

Page 8 of 19

Item

No. Description Manufacturer Country of Origin

KSB France

Allweiller Germany

Ebara Australia

Goulds - ITT USA

Leistritz Germany

Sterling-SIHI Germany

Sulzer David Brown International

Clyde Union Pumps USA /U.K

United Pumps USA

25 Pumps- PD Screw Pumps Albany Pumps Germany

Bornemann Germany

Flowserve France

Gorman Rupp USA

Leistritz Germany

Plenty UK

Allweiller Germany

IMO USA

Warren Pumps USA

Houttuin Netherlands

26 Pumps- Drain Sump & Other

Utility Pumps Patterson USA

Flowserve France

Blackmer USA

Gorman Rupp USA

Goulds - ITT USA

Grundfos USA

Clyde Union Pumps USA /U.K.

27 Pumps- Submersible (for

U/G Mogas/Gas Oil Tanks)

Gilbarco Veeder

Root

USA

F E Petro USA

28 Fire Pumps AURORA USA

PATTERSON USA

29 Relief Valves

Tyco Italy

Dresser UK

Weir Valves UK /USA

Broady UK

Bailey Birkett U.K.

30 Strainers Muller Canada / USA

Orion Italy

Spirax Sarco UK

Pacific UK

PBV USA

------------------------------------------------------------------------------------------------------------------------------------------------------

Page 9 of 19

Item

No. Description Manufacturer Country of Origin

Plenty UK

Velan Canada

Barton Firtop U.K.

Eaton Germany

Fabrotech USA

31 Tank Calibration SGS

ITS Calibrett

32 Tank Roof - Aluminum

Geodesic Dome

Conservatek USA

HMT USA

Vacono Germany

Temcor CTS USA

Ultraflote USA

33 Tank Roof/ Internal

Aluminum Floater

Conservatek USA

HMT USA

Baillie Australia

Vacono Germany

Ultraflote USA

34 Third Party Inspection &

Certification Agency

ABS

Bureau Veritas

Germanischer Lloyd

Lloyds Register

TUV

35 Truck loading arms

EMCO Germany

FMC France

Liquip Germany

Oilco USA

OPW USA

36 Marine Loading Arms FMC TECHNOLOGIES FRANCE

WOODFIELD U.K

KANON Loading

Equipment NETHERLANDS

37 Truck Loading Drop Ladder

for access to truck top/ Fall

protection system

EMCO Germany

FMC France

Liquip International Germany

Oilco USA

Kanon NETHERLANDS

OPW USA

------------------------------------------------------------------------------------------------------------------------------------------------------

Page 10 of 19

B. List of Approved Vendors for Electrical & Instrumentation :

Itm No. Description Manufacturer Country of

Origin

1

Power Cables/Control

Cables/Earthing Cables

ABB Sweden

BICC/Ducab UK/Dubai

Draka UK

Nexans France

Kerpen Cables Germany

Prysmian Italy

Riyad Cables Saudi Arabia

2 Pressure/Temperature/

Flow Transmitters

ABB Belgium

Emerson Rosemount USA

Foxboro USA

Honeywell USA

Yokogawa Japan

3 Cable Glands BICC UK

Crouse Hinds UK

CMP UK

Hawke UK

4 Cable Support System Swift UK

Vantrunk UK

Abahsain Cope Saudi Arabia

Tolmega France

Gersan Turkey

Wibe Sweden

5 Medium Voltage

Switchgear, Transformers,

Low Voltage Switchgear

ABB Italy/ Finland

Cutler Hammer Germany

Powell USA

Areva France

Merlin Gerin (Schneider) Germany

Emirates Transformers UAE

Siemens Germany

Larsen and Toubro India

6 Diesel Power Generator Caterpillar USA

Cummins UK

7 Induction Motors

(690Volts)

ABB Finland

Siemens/Loher Germany

Vacon Finland

WEG Brazil

VEM Germany

8 Induction Motors

(415Volts)

ABB Finland

Siemens Germany

Westinghouse USA

Weg Brazil

VEM Germany

9

Variable Frequency

Drives

ABB Finland

Siemens Germany

Vacon Finland

------------------------------------------------------------------------------------------------------------------------------------------------------

Page 11 of 19

Itm No. Description Manufacturer Country of

Origin

Schneider Electric France

10 Pressure Gauges Budenberg USA

Wika USA

Bourdon Sedeme France

Weksler USA

Tel-Tru USA

Baumer France

11 Instrumentation Cables

Draka UK

Belden UK

Nexan’s France

Delta Crompton UK

BICC/Ducab UAE

Kerpen Cables Germany

12 Level and Flow Switches Magnetrol USA

E&H Germany

EMERSON USA

13 Radar Tank Gauging

System

SAAB Rosemount Sweden

Honeywell ENRAF USA

14 Ultrasonic Level

Transmitter

Magnetrol USA

E&H Germany

Vega Germany

15 Gas Detection System Draeger USA/Canada

Honeywell - Sieger USA

Siemens Switzerland

16 Lighting Fixtures and

Small Power Equipment/

Push Button Stations/ ESD

Push Button Stations

CEAG UK

Legrand / Appleton France

Philips Netherlands

Stahl Germany

Thorn Sonpak UK

17 Junction Boxes CEAG UK

Stahl Germany

Rose UK

Weildmuller Germany

18 Explosion Proof

Distribution Boards

Bartec Germany

Stahl Germany

CEAG UK

Feam UK

Rose UK

Cooper Crouse Hinds UK

19 Earthing Materials Furse UK

Wallis UK

20 Communication Cables,

Multi-drop Mob-bus loop

cables

Belden UK

21 Relays Omron/Idec Japan

Telemechanique/Allen

Bradley

USA

22 CCTV Honeywell USA

------------------------------------------------------------------------------------------------------------------------------------------------------

Page 12 of 19

Itm No. Description Manufacturer Country of

Origin

System and Camera

Johnson Control UK

Hernis Norway

Pelco UK

Siemens Germany

Sony Japan

Tyco UK

Bosh Germany

23 Access Control System Honeywell USA

Siemens Germany

Johnson Control UK

Tyco UK

24 Turbine Flow Meter Emerson (Daniel) USA

Smith ( FMC) Germany

25 Batch Controller Emerson

(Danload/Petrocount)

USA

Smith (Accuload) UK

26 Digital Set Stop Valve Emerson (Daniel) USA

Smith (FMC) Germany

27 Truck Overfill/ Earthing

system

Earth-Rite UK

Scully UK

28 Computers and Monitors EH USA

Dell USA

Hewlett Packard (HP) USA

29 Central Control System

(SCADA / PLC)

ABB Sweden

CSI UK

Emerson USA

Yokogawa Japan

Honeywell USA

Invensys UK

Schneider France

Siemens Germany

30 Electric Actuators Rotork USA

BIFFI ITALY

31 Leak Detection System ATMOSI INT’L UK/SINGAPORE

EFA TECHNOLOGIES USA

CASON ENG Hungary

TELVENT ENERGIA Europe

KROHNE Germany

TYCO / TRACETEK-

International

------------------------------------------------------------------------------------------------------------------------------------------------------

Page 13 of 19

C. List of Approved Vendors for Domestic Water Supply System :

Item

No. Description Make BSI Reference

1 uPVC HP Class E Pipes + all

accessories

Hepworth - UK BS 3505- 1986

G+ F - UK, BS 4346 -1969

KEYTERAIN - UK

2 Preinsulated copper pipes

including all brass

accessories.

Inter, BS 2871 Part 1

Everhot, BS 864 Part 2.

Arison glass lined -

Italy

3 Water heater glass lined 80

& 100 litres horizontal +

vertical type

Arison CEI–Std latest

amended

BS 853-1981 + BS 5500 -

1982

4 Gate valve bronze Crane, BS 1400 SCB6

Peggler

5 GRP - Hot pressed panel

tank

Gulf Eternite BS 3396 +

BS 3749 latest

amended Solico

FBI

6 Pressurized Booster pump

set.

Grundfos

SMC

DPL - NETHERLANDS

D. List of Approved Vendors for Drainage Installation :

Item

No. Description Make BSI Reference

1 Underground uPVC pipes and

fittings / polyprolyvan

Hepworth,

Terrain,

Marley

BS 4660, 5481 (1989)

2 uPVC pipes and fittings 32 & 40

mm & 50 “p” trap etc. /

vitreous clay pipes fittings

Hepworth,

Terrain,

Marley

BS 3943

BS 5254

BS 5255

3 uPVC pipes and fittings 82, 110,

160 and gully traps, rain pipe

adaptor etc.

Hepworth,

Terrain,

Marley

BS 4514 -1983

4 Sanitary ware Twyford - UK

Ideal Standard

RAK Ceramic - UAE

BS 3402–1969

------------------------------------------------------------------------------------------------------------------------------------------------------

Page 14 of 19

5 Drainage sump pump with

stainless steel body and

impeller 1.5 Litres discharge at

20.0 Mts head

Grundfos,

SMC - UK,

DPL -

NETHERLANDS,

Wire - Germany

6 Dl manhole covers and frames

( To approvals )

DI street gully covers

( To approvals )

Stanton - UK,

Elington - UK,

RSI - India,

Ducast - UAE

BS 497 Part-1

E. List of Approved Vendors for Air Conditioning System :

1. Window A/C : “O “General, Carrier, National, York

2 Split Unit A/C’s : York, Trane, Carrier

3. Copper pipes : Muller Brass

4. MS pipes & Fittings : Nippon – Japan

5. Piping insulations : Armaflex / Insulux

6. Duct work : GI Sheeting as per specification to approvals

7. Duct insulations : Atlas (USA), KIMCO

8. All Valves : Crane UK, Peggler - UK

9. Thermo-stats : Honeywell, Climaterial

10. Coating on Canvas : Foster – USA

11. CANVAS : 6 Oz. Indoor and 8 Oz Outdoor

12. Industrial Extract Fans : Green heck, Nuaire, Woods/approved

equivalent

13. Wall mounted propeller fans: Xpelair, Ventaxia, Vortice/approved

equivalent

Notes:

All external refrigeration pipes shall have overall coating with Aluminium

sheets of min 2.0 mm thick with hammer tome finish, after providing the foam

insulation on pipes with canvas cloth and foster coating.

------------------------------------------------------------------------------------------------------------------------------------------------------

Page 15 of 19

F. List of Approved Vendors for Fire Alarm & Fire Protection System :

Sr. Description Make BS Ref. Remarks

1 Fire alarm System Cerebrus – UK

Gent - UK

Simplex - UK

Synchro – UK

Thorn - UK

Eurocal - UK

Photain- UK

TYCO - France

AFAMinerva– UK

Honeywell - USA

2 Smoke Detectors /

Heat Detectors/Fire

Alarm bell/ Break

Glass

Eurocal,

Photain,

GENT,

TYCO,

AFA Minerva - UK

5750 Part 2

1987, 3402-

1969, 4662 +

5839 Part 2

3 Co2 extinguishers –

5 Kgs.,

hose reel

Angus – UK,

Walter,

Unitor UAE,

NFPA

(UL/FM

approved)

4 Dry powder

extinguishers – 5

Kgs. Hose reel

Angus – UK,

Walter,

Unitor UAE

Unitor helios,

Angus,

NFPA

(UL/FM

approved)

------------------------------------------------------------------------------------------------------------------------------------------------------

Page 16 of 19

G. List of Approved Makes for Electrical Installation (Building MEP Works) :

Sr. Description Make Cat # BS Ref. Remarks

1 HD PVC rigid

conduits

And accessories

EGA Tube

Marhsall Tuflex – UK

or equivalent

4607

and

6099

2 Rigid GI Conduits

and accessories

Barton – UK

3 Rigid GI Trunking

and accessories

Davies – UK

Vantruck - UK

4 GI switch boxes MK / Delta /Crabtree –

UK

4662

5 Switches MK / Delta / Crabtree

UK

Metallic

Plate Cover

(out door)

3676

For indoor

plastic cover

switches

6 Switches – Ex proof Stahl / O-Z Gedney

7 13 Amps. Switch

sockets outlets

MK / Delta / Crabtree-

UK

1363/A

For indoor

Plastic cover

switches

8 15 Amp switches

sockets outlets

MK / Delta / Crabtree -

UK

Metallic Plate

Cover (out

door)

546-1950

For indoor

plastic cover

switches

9 20 Amps DP switches

with neon indication

MK / Delta / Crabtree-

UK

Metallic plate

cover

( out door )

3676-

part

For indoor

plastic cover

switches

10 Flex outlets 20 A with

fuse

MK / Delta / Crabtree-

UK

Metallic plate

cover

(out door )

For indoor

plastic cover

switches

11 Cooker connection

units 45 Amps.

MK / Delta / Crabtree -

UK

Metallic plate

cover

(out door )

5733-

1979

For indoor

plastic cover

switches

12 45 Amps DP

switched for cooker

With neon indication

MK / Delta / Crabtree-

UK

Metallic plate

cover

(out door)

3676-

part-1

1987

For indoor

plastic cover

switches

13 Telephone outlet MK / Delta / Crabtree -

UK

Metallic plate

cover

(out door )

For indoor

plastic cover

Switches

14 TV coaxial cable

outlet

MK / Delta / Crabtree -

UK

WHI plastic

cover

For indoor

plastic cover

switches

15 Single core PVC Cu

wires

BICC– UK / DUCAB UAE 6004 IEC

502

16 XLPE / SWA PVC Cu

Cable

BICC – UK / DUCAB –

DUBAI / Delta / Pirelli

UK

5467 +

6346

(pvc)

17 MCB - DBs ABB – Sweden /

MERLIN GERIN France /

Mitsubishi /

GDS Sharjah

5486

Part

12+13

IEC 439

------------------------------------------------------------------------------------------------------------------------------------------------------

Page 17 of 19

Sr. Description Make Cat # BS Ref. Remarks

18 (LBS) Isolator in w/p

IP 55 Enclosure

MERLIN GERIN,

France / ABB - Sweden

5419 IEC

408

19 Brass cable gland

with E - tags

BICC UK

CMP UK

20 Earthing Material Furse UK,

BICC UK

Wallis UK

21 Exhaust fan – central

exhaust fan

Xpelair – France,

Ventaxia,

Vortice,

Elicent

22 Emergency Lights Merchant Adventure,

Menveir – UK

Pescara

5499

Part -1

+ 3, 2560

23 Light Fittings Saudi Lighting FITZ,

Gerald Philips / Lite

Tech, Dubai

24 Light Fittings – Ex

proof

Stahl / O-Z Gedney /

CEAG

25 Cable Trays and

accessories (Building

MEP)

BICC,

GEC,

Tolmega - France

Wibe – Sweden

Swift – UK

Vantruck – UK

Gersan ,Turkey

Oglaend, Norway

Mita-U.K.

Cope- KSA

NOTES

MDBs, SMDBs, sub DBs shall be assembled with components from one manufacturer.

The panel boards SMDBs, sub DBs shall also be either assembled by the principals of

the manufacturer at abroad or by the authorized local agent’s workshop. All shop

tests shall be carried out by the manufacturer at free of cost, as requested by the

Engineer, includes all necessary test certificates of laboratories. An inspection at

assembled shop shall be arranged by the contractor for final approval of the main

panels, sub DBs prior to delivery to site.

APPROVED MAKES FOR ELECTRICAL ITEMS

The Approved Makes for materials are included in particular specification are

preferred to maintain the standards for all materials, but tenderer shall price his offer

to the similar materials to the standards those are specified. Contractor to submit

material list / samples etc. to the Engineer’s approval which is final.

------------------------------------------------------------------------------------------------------------------------------------------------------

Page 18 of 19

H. List of Approved Vendors for Miscellaneous Items :

Item No. Description Make

1 Paints JOTUN, National Paints, International Paints. Sigma,

Leigh Paints

2 False Ceiling AMF

3 False Flooring Unicorn

4 Water Treatment

Plant

Water Bird – UAE,

Facet – U.K.,

K.Pack -Netherlands

I. Approved Sub Contractors :

i. Building Works

1. Khansaheb Civil Engineering

2. Six Construct

3. Al Futtaim Carillion

4. Convergent Value Engineering LLC

5. Ranya General Construction Co. LLC

6. Engineering Contracting Co LLC

7. System Construct LLC

ii. Civil Works

1. Sands Contracting

2. Khansaheb Civil Engineering

3. Six Construct

4. Al Futtaim Carillion

5. ITC Contracting LLC

6. Arcade Star

iii. Storage Tanks (API 650)

1. Belleli Energy , UAE

2. CB&I, UAE

iv. Vessels

1. Belleli Energy , UAE

2. GMMOS

3. MIS

4. Deustche Bobcock

5. Adyard Abudhabi

------------------------------------------------------------------------------------------------------------------------------------------------------

Page 19 of 19

v. Electrical & Instrumentation

1. Kentech International Ltd.

2. Kharafi National

3. Control & Applications Emirates

4. Danway LLC

5. Consilium

6. Honeywell

7. ABB

8. Larsen & Toubro Ltd

9. Audex Pte Ltd

10. Toledo Electrical & Mechanical Works

11. Schneider / Cimac

vi. Mechanical & Piping

1. Maritime Ind. Services (MIS)

2. NICO / Topaz Engineering

3. Contracting and Trading (CAT)

4. Albanna Engineering

5. Descon Engineering

6. Petron Emirates Mfg & Contracting

7. Tata Projects