31 wheels and tires
TRANSCRIPT
-
8/10/2019 31 Wheels and Tires
1/5
3
WHEEL ANDTIRECONTENTS 311090
NERAL INFORMATION .................. 2 SERVICE SPECIFICATIONS ..............VEHICLE SERVICE ..................... 5 TROUBLESHOOTING .......................
WHEEL AND TIRE .........................Tire Inflation Pressure Check . . . . . . . . . . . . . . . . . 5Tire Wear Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Wheel Runout Check . . . . . . . . . . . . . . . . . . . . . . . . . 5
-
8/10/2019 31 Wheels and Tires
2/5
1-2 WHEEL AND TIRE - General Information
tem
GENERAL INFORMATION 311 00
CJ5A~ _ _ _ _
J2A CJ2A
DNSEL. DRSEL DNMEL, DRSEL DNDEL. DRDEC
oth steel type and aluminum type wheels haveen adopted. The type of wheel used depends
n the vehicle model. door models>
A compact spare tire has been adopted asspare tire in some models.
Wheel Type Steel type Steeltype, Aluminum typeAluminurn tme*
Amount of wheel offsetmm (in.)
46 (1.8) 46 (1.8) 46 (1.8)
Pitch circle diameter 100 (3.9)(P.C.D.) mm (in.)
Tire
parewheel
100 (3.9)
Size P155/80R13 P175/70R13 P185/65R14P175/70R13*
Type Steel type Steel type Steel type
Size 14 x 4.OT 14 x 4.OT 15 x 4.OT
pare tire
Amount of wheel offset 46 (1.8)mm (in.)
Pitch circle diameter 100 (3.9) 100 (3.9) 100 (3.9)
T125/70D15
(P.C.D.) mm (in.)
Size
46 (1.8)
tem CK2A
Wheel Type Steel type
/NMRM SRDEL
Size 13 x 5.008
CK5A CK5A
SNDEL, SRDEL SRJEL
Steel type, Aluminum typeAluminum type*
13 x 5.00B,14 x 5 1/2JJ*
14 x 5 1/2JJ
Tire
Amount of wheeljoffset mm (in.) 46 (1.8)Pitch circle diameter 100 (3.9) 100 (3.9) 100 (3.9)(P.C.D.) mm (in.)
Size P 175POR 1 3 P175/70R13 P185/65R14P185/65R14*
parewheel
Type Steel type Steel type Steel type
15 x 4.OTizeAmount o wheel 46 (1.8) 46 (1.8) 46 (1.8)offset mm (in.)
14 x 4.OT 14 x 4.0T, 15 x 4.0T
Pitch circle diameter 100 (3.9)(P.C.D.) mm (in.) oo 3.9)
100 (3.9)
pare tire ~ Size T105/70D14 83M T105PODI 4 83MT125/70D15* T125/70D15
-
8/10/2019 31 Wheels and Tires
3/5
WHEEL AND TIRE - Service Specifications 31
ms
ead depth of tire mm (in.)
heel runout (Radial runout) mm (in.) Steel wheel
RVICE SPECIFICATIONS 311 00
Limit
1.6 (.06)
1.2 .05) or less
heel runout (Lateral runout) mm (in.)Aluminum wheelSteel wheel
Aluminum wheel
1O
.04) or less1.2 (.05) or less
1 O .04) or less~~
-
8/10/2019 31 Wheels and Tires
4/5
-4 WHEEL AND TIRE - TroubleshootingROUBLESHOOTING 31100
Reference pageymptom Remedyrobable cause
Under-inflationor lack of rota-tion
Adjust the tirepressure.
Refer to P.31
11x01 16
11 XO109
Over-inflation orlack of rotation
11x0110l l X 0 1 1 7
~Under-inflation Adjust the tirepressure.
Refer to P.31
11x01 11
Excessive cam-ber
Check thecamber.
Refer to GROUP33A - On-vehiService.
llXO112 iI1 x 0 1 1 8
Incorrect toe-in Adjust thetoe-in.
11x011 911x0113
Unbalancedwheel
Adjust theimbalancedwheels.
1 1 x 0 1 1 4 1 1 x 0 1 2 0
Rotate the tirescheck the frontsuspensionalignment.
Refer to GROU33A - On-vehiService.
Lack of rotation of tires or worn orout-of-alignment suspension
-
8/10/2019 31 Wheels and Tires
5/5
WHEEL AND TIRE - On-vehicle ServicePVheel and Tire 31ON-VEHICLE SERVICE 311000TIRE INFLATION PRESSURE CHECK
NOTEFor information on tire inflation pressure, refer to the laattached to the center pillar at the drivers side.
n TIRE WEAR CHECK 311001
Wear indicatorMeasure the tread depth of tires.Limit: 1.6 mm .06 in .)
If the remaining tread depth is less than the limit, replathe tire.
NOTEWhen the tread depth of tires is reduced to 1.6 mm .06or less, wear indicators will appear.
53Y510
A11F0013
WHEEL RUNOUT CHECK 311001
Jack up the vehicle so that the wheels are clear of the floWhile slowly turning the wheel, measure wheel runout wa dial indicator.
Limit:Radial runout.Steel wheel; 1.2 mm .05 n.) or lessAluminum wheel; 1.0 mm .04 n.) or less
Steel wheel; 1.2 mm .05 in.) or lessAluminum wheel; 1.0 mm .04 n.) or l ess
If wheel runout exceeds the limit, replace the wheel.
Lateral runout.
WHEEL AND TIRE 311001INSTAL LA TION SERVICE POINT
Tighten the wheel nut to the specified torque.
f lb