30.6.20111 university of west bohemia new technologies research centre tomáš gÖrner, hana...
TRANSCRIPT
30.6.2011 1
University of West Bohemia
New Technologies Research Centre
Tomáš GÖRNER, Hana ČECHOVÁ
PILSEN, june 2011
2
TIAM
Toolkits for hazard Identification, risk Assessment and prevention of work-related Musculoskeletal disorders based on a collaborative platform.
PARTICIPANTS
Technical University of Catalonia – Spain, Foundation of IRCCS “Major Hospital“ Policlinico Mangiagalli Regina Elena Lombardy – Italy, Technology Center PERG – Upper Austria, University of Tallinn – Department of Work Environment and Safety – Estonia University of West Bohemia (New Technologies Research Centre) – Czech
Republic
Sub-project TIAM
30.6.2011
3
MAIN OBJECTIVES Analysis of existing:
tools, criteria, guidelines, and regulations, in ergonomics and work related occupational diseases of MSS in participating countries.
Appropriate application of them in order to: better quality of life for working population, increase labor productivity, saving medical expenses.
Creation of a database with: recommendations, examples of good practice and new methods, applications in different work cases, dissemination of these materials in small and medium-sized enterprises.
Sub-project TIAM
30.6.2011
4
Sub-project TIAM - analysis
30.6.2011
COUNTRY ERGONOMSNEW
ERGONOMIC METHODS
ERGONOMIC PROGRAM
E YES YES YES
I YES YES YES
A NO NO YES
EST NO NO NO
CZ NO NO NO
5
Gathering of examples of good practice
from all participating countries creating of catalog, discussion about choice of suitable methods for determining the existence of the risk of WMSDS:
NIOSH OCRA
creating toolkits
Sub-project TIAM – good practice
30.6.2011
6
method of solving the issue of lifting loads, determines the weight limit by means of multiplikators (according to conditions for lifting the load), safe condition - the burden can be lifted by 75% women and 99% of men, NIOSH equation
NIOSH toolkit
Sub-project TIAM – NIOSH
30.6.2011
7
OCRA method solves risk of upper limb by repetitive movements, Procedure:
determining the time of repeated movements, determining the duration factor, determining the score of hands using, determining the frequency of movements, determining the score of force, determining the score of position stereotypy and repeatability, determining the additionalc risk factors, Total OCRA score
OCRA toolkit
Sub-project TIAM – OCRA
30.6.2011
8
DONE: FUJI KOYO CZECH – Pilsen,
steering for cars, GRAMMER CZ, s.r.o. – Tachov,
car headrests, KERMI – Stříbro,
heaters and shower cabins MILOS s.r.o. – Roudnice nad Labem,
structural systems,
WILL BE DONE: Schneider – meat processing Panasonic – production of TV Elko – beverage warehouse Daikin – air-condition units Tesco
Sub-project TIAM – Diessemination
30.6.2011
9
ERGONOMICS AT UWB
30.6.2011
10
BENEFITS FOR SOUTH WEST ERLIER Ergonomics is not easily applicable in SMEs
standards and government regulation are not the law existence of many of these standards and government regulation penetration of new techniques in Ergonomics
NOW Interest in Ergonomics in Czech Republic is growing rapidly:
Czech Ergonomic Society Master theses and Bachelor theses Purchases of sophisticated ergonomic softwares
DELMIA – Ergonomics Design and Analysis Tecnomatix – JACK
Managers want to improve the working environment
THEREFORE the enterprises need our help and we need to be connected and synchronized in Europe – new and easy ergo methods.
30.6.2011
11
THANK YOU FOR YOUR ATTENTION
30.6.2011