Mountx2pcs

or 5V power bank via

or use Micro USB port to get power . Make sure the

specification matched if using 3rd party DC adapters

USB Power

USB Power Note: Max 2 kits within a room. When the transmitter and the receiver are

placed face to face of each other, the transmission distance is up to

100ft; when the transmitter and the receiver are placed freely, to 25ft.

The JTECH-WEX-60GA zero latency wireless HDMI extender is the perfect

solution for transmitting high definition video and audio to any HDTV

display up to 100 feet away (clear line of sight) with no delay. The

JTECH-WEX-60GA supports resolutions up to 4K x 2K @ 30Hz, 1080P 3D

and also supports CEC, 7.1 channels of High Bit Rate (HBR) lossless digital

audio formats such as Dolby TrueHD and DTS-HD Master Audio. With zero

latency, the JTECH-WEX-60GA is an ideal solution for gaming, 3D movies

and live video applications. or 5V power bank via

3. Do not place any objects in or on these devices.

4. To avoid the risk of electrical shock, do not attempt to repair the

device or open the enclosure without professional guidance.

5. Be sure that both transmitter and receiver have acceptable air flow

and ventilation to prevent damage from overheating.

1. Supports 4K@30Hz / 1080P 3D

2. Low power consumption

Note:

1) Transmission distances will vary for each environment

2) This device does not transmit through walls, brick/stone or glass.

3. Supports CEC, ARC

4. Uncompressed transmission, zero latency

5. 100ft transmission distance with clear line of sight

6. Supports Dolby TrueHD, DTS-HD Master Audio and LPCM

audio formats

7. Supports digital audio streams up to 7.1 channels

1) Long press the “Set” button (> 10 seconds) to restore the extenders

to a factory default setting. Please note, you must perform a factory

reset to connect the transmitter and receiver prior to initial use.

HZ

HZ

100ft

25ft

Copyright© J-Tech Digital, Inc. All rights reserved.

1) Connect the HDMI source device to the transmitter HDMI input port.

2) Connect the HDMI display device to the receiver HDMI input port.

3) Connect the provided power adapters to the transmitter and receiver.

2)When connecting the transmitter to the receiver, it is better to place

the transmitter and receiver facing each other for a successful pairing.

3)This device does not transmit through walls, brick/stone or glass.

A: 1) Please check if the data transmission LED indicator stays

illuminated.

Q: The data transmission LED indicator of the transmitter blinks slowly,

but there is no signal output on the display/monitor.

A: 1) Please verify that the source device is outputting an HDMI signal

to the transmitter

2) Try connecting the source device directly to your display device to

confirm there is an HDMI output signal from your source device. You

may also try a different HDMI source device and different HDMI

cable with your wireless transmitter.

4) Remove other wireless signal interference from your environment

and remove any obstructions preventing clear line of sight between

transmitter and receiver.