3~ CBT CbI~fC1~ (~~, ~ "QCi "JfElm JEm) . .

OFFICE OFTHE DEVELOPMENT COMMISSONER (MICRO, SMALL & MEDlUM ENTERPRISES)

MINISTRY OF MICRO, SMALL & MEDIUM ENTERPRISES GOVERNMENT OF INDIA

Nirman Bhawan, 7~ Floor, Maulana Azad Road, New Delhi·ll0 108

~ WTi1, ClfcfCft ~, ~ 3W!R ~, Gf$W-ll0 108 on 11.1: 0.' ut;Vt:LOP'M t:f'iT COM~lISSIOl"t:1t

"'I~I~"'I(~' Ot' MI('I(O.S"'A1.L" Mt,.Ull.fo1 t:l'fl t:KJ'KIS[.$ I;UVt:W,,"Mt:lrrl'CWI;"IUIA

Ph. EPAX-23063800, 23063802,23063803,23063804,23063805 &2306 3806

No. 65(02)ITCD/B03/2020-21/07

DCN:NROOSM&E/20200609/33.00.52/1.17/2.9575

Date: 09/06/2020

To,

The Director (1/c), MSME- Testing Centre, Saheed Capt. Gaur Marg, Okhla, New Delhi-11 0020

Subject: Revalidation of amount Rs. 2,95,75,8521- out of previous Sanction of Rs. 3,16,59,616/- to MSME-Testing Centre, New Delhi under the object head Machinery and Equipments (4851.00.102.33.00.52) during Financial year 2019-20.

Sir,

I am to convey the approval of AS & DC (MSME) for revalidation of sanction no. 65(20)fTCD/B03/2019-20/Pt-1/68 dated 04/03/2020 issued during FY 2019-20 for expenditure not exceeding Rs. 2,95,75,852/- (Two Crore Ninety Five Lakh Seventy Five Thousand Eight Hundred Fifty Two only) to MSME- Testing Centre, New Delhi during the current FY 2020-21 for procurement of Machinery and Equipments to enhance testing facilitiesl balancingl replacement of machinery used for conducting tests and auxiliary equipmentsl accessories required for modification or upgradation 1 to create complete new test facility under object head Machinery and Equipments (4851.00.102.33.00.52) of Infrastructure Establishment DC (MSME) for FY 2020-21.

2. The expenditure of Rs. 2,95,75,852/- (Two Crore Ninety Five Lakh Seventy Five Thousand Eight Hundred Fifty Two only) will be accommodated in Demand No. 67 - Ministry of Micro, Small & Medium Enterprises (MSME) under object head Machinery and Equipments (4851.00.102.33.00.52) of Infrastructure Establishment DC (MSME) for FY 2020-21.

3. The procurement shall be made strictly as per GFR norms 1 Government prescribed procedures 1 Rules and Guidelinesl as per the specifications mentioned in the attached Annexurel meeting at least the requirement of National 1 International standards.

- 2 - No. 65(02)/TCD/B03/2020-21 107

4. AlA/Director/Director I/c/Asst. Director IIc should furnish the progress report of the work! Procurement and statement for actual expenditure incurred to this office by z= of the following month inter alia with the reason or variation if any and ensure utilization of fund within the current FY 2020-21.

5. AlA/Director/Director IIc/Asst. Director I/c shall furnish installation report and commissioning certificate of the procured Machinery & Equipments along with expenditure incurred and fund utilization certificate.

6. This issues with the approval of AS & DC (MSME) vide E- office no. 15378 dated 29.05.2020.

(Pramod Bharti) Asstt. Director

Copy to:

1) The Principal Accounts Officer (Compilation) Ministry of Industry, Udyog Bhawan, New Delhi.

2) Pay & accounts office (MSME), New Delhi. 3) B & A Division, % DC (MSME), Nirman Bhawan, New Delhi. 4) SENET Division with the request to upload on DC (MSME) website. 5) Sanction File.

~ (Pramod Bharti) Asstt. Director

· Annexure to No. 65(02)/TCD/B03/2020-21/07 Date: 09/06/2020

SI. Name of Used for IS Specification Amount Machinery & No.1 Relevant Complete Technical specifications (in Rs.)

No Equipments & Qty. specification 1. Oxygen Index Test Domestic IS: 694, IS: 10810 As per CI. 10.5, CI. 10.7 of IS: 694 and IS: 10810 584100

Equipment cum and power Pt. 58 & 64, Pt. 58 & 64 Temperature index Cables IS: 1554-Pt.1, As per CI. 16.5, CI. 16.10 of IS: 1554-Pt.1, Amend. test equipment IS: 7098- Pt. 1 NO.1 June 1994 to IS 1554 (PART 1): 1988 and Qty-1 Set including IS: 10810 Pt. 58 & 64 Accessories, fixtures, As per CI. 16.14, CI. 16.9 of IS: 7098- Pt. 1 and etc. Amend. NO.1 APRIL 1994 to IS 7098 (PART 1):

1988 and IS: 10810 Pt. 58 & 64 2. Cord Flexing Test Electric Iron IS: 366 With Digital Counter Meter, mechanical fixture for 123900

apparatus fixing items to be tested, angle adjustment 450, Qty-1 Set including 900 & 1800, inbuilt variable power supply 0 to 270 Accessories, fixtures, V. etc. System should have selector switch for all three

angles as above.The system should be able to test 3 samples at a time. As per IS: 366

3. Test for Harmonic Electric CI: 17 of IS: Complete test set up to measure THO of brush less 177000 Distortion ceiling type 374/2019 and IS: dc motor fans. The BLOC test facility should Qty-1 Set including fans and 14700 (Part 3/Sec 2) comply as per the requirements given in IS: 14700 Accessories, fixtures, regulators (Part 3/Sec 2) Total harmonic distortion shall be etc. less than 20 percent.

4. Controlled Humidity Electrical IS: 302-1 Inner Size: 2514580 Chamber appliances Length X Width X Depth = Qty-1 Set 1800 mm. x 1000 mm. x 1000 mm., including Accessories, Made of Stainless steel 304 fixtu res, etc. Temp.: 150C to 450C LC: 0.10C,

RH: > 95 % Humidity, LC: 0.1 % Stand with wheels to move chamber. The equipment should have calibration certificate from N.A.B.L. accredited laboratory.

5 Universal Tensile Domestic IS: 694, IS: 1554-1, Capacity: 0-10 KN= 1 T or 0-100 KN= 10 T or 1481372 testing machine with and power IS: 7098-1 0-250 KN= 25 T software to record test Cables Load measurement accuracy: + 1 % of reading, data Qty-1 Set (To measure Accuracy: 1 % including Accessories, the tensile Test Speed: 1-500 RPM/min., fixtures, etc. strength and Stroke: 800 mm

elongation of Testing software: Printable insulation, Lest count: 0.01 N, sheath and Desktop computer: armour With latest configuration: wires and (i7/4 GB RAM/HB HOD or better) and other strips) accessories

Monitor: 24" UPS: Input: 0-270 V AC. Output: 230 V + 5% Wattage: 1 kW processor and Laser jet printer (MFP Multi-function Printer), Over travel overload protection, Tensile test software with strain rate control, Electronic extensometer in-built with software compatibility, Complete accessories. The equipment should have calibration certificate from NABL accredited laboratory.

6 Measuring device for for As per IS: 694, IS: Magnification 10X, Linear movement: X axis and 531000 measurement of measureme 7098-1 & IS: 1554-1 Y-axis, 25 mm, thickness of insulation nt of and sheath of various thickness of types of cables insulation Qty-1 Set and sheath including Accessories, of various fixtures, etc. types of

cables

7 Microwave Digester for AAS and Microwave digester with touch screen display must 3800000 System for AAS /ICP- OES be capable of processing 15 or more reaction DES Sample vessels simultaneously with individual pressure Qty-1 Set preparation, active control on reference vessel with pressur~

t:> , ~ rate increase control and direct temperature

6;f{Y~ -/- 4JQI61';)P

I

control on vessels. System should have installed microwave power of 2000 W or more. Vessel Specifications - DVolume of reaction vessel: 75 ml or more DOperation temperature: 260°C or above DVessel Operation pressure: 40 bar or more DPower requirement: 1500W or more. DCurrent requirement: 220-240V, v50 Hz DEach vessel should be individually serialized Pressure and temperature control - DPressure and temperature sensor of immersing type/probe/contact free for one reference to be included in the offer and the same should be provided of control using transducers and gas bulb respectively with wireless transmission. Cavity & lid - DStainless steel construction with fluoropolymer coating Software - DBuilt-in software with screen display for Temperature, weight, method search, power profile, method set-up etc. DSoftware must be Built-in cook-book methods for various matrices DSystem must have control and graphic display for all routine operations Safety Features- DBuilt-in integrated cooling system for removal of gases (vapours) and cooling of vessel without a use of external chiller/thermostat in less than 20 minutes DSafety interlocks should be available so that vessels can't be opened during hot condition. DOver pressure should be released from the vessel to avoid any damage to the vessel. DNecessary cables and user manual for operation of the system. DConsumables for 2500 samples DFume exhaust system must be quoted with the system.

8 Charging / Discharging Battery IEC: 62133 (part- 1, Charging / Discharging Setup 550000 Setup testing part-2) ( CC/CV) 10 Chanel 25V / 25A constant current Qty-1 Set facilities as ,Constant voltage Digital with accuracy 0.5% input

per IEC: 230 volt AC 50 HZ 62133 (part- 1, part-2)

9 Show charging --- Do --- --- Do --- Show Charging 350000 apparatus CC/CV Charger for slow 4 rase 5V/10Aconstant Qty-1 Set current, Constant voltage Digital with accuracy

0.5% input 230 volt AC 50 HZ 10 Show Charging --- Do --- --- Do --- Show Charging 350000

Qty-1 Set CC/CV Charger for slow rase 5V/50Aconstant current ,Constant voltage Digital with accuracy 0.5% input 230 volt AC 50 HZ

11 External Resistance --- Do --- --- Do --- External Resistance 150000 Test apparatus 80 mO ± 20 mO 20(Prefer) (1 OOA ) Nicron Wire Qty-1 Set 850°C

12 External Resistance --- Do --- --- Do --- External Resistance 150000 Test apparatus 1 0 ± 20 mO 20(Prefer) (1 OOA ) Nicron Wire 850 Qty-1 Set °C

13 Crush test Apparatus --- Do --- --- Do --- 20 KN, 0.001 mm, 0.01 Volt Digital Hydrolic 350000 Qty-1 Set pressure

14 Forced Discharge --- Do --- --- Do --- Forced Discharge Setup 250000 Setup 250A, 17 Volt 0.001/0.01/0.1/0 A & Volt constant Qty-1 Set current,Constant voltage Digital with accuracy

0.5% input 230 volt AC 50 HZ 15 Vacuum oven --- Do --- --- Do --- 5-15 KPA, 20 ISC Digital Size 18x18x18 inch SS- 150000

Qty-1 Set 304 16 Free fall (drop test --- Do --- --- Do --- 400,650,700,900,1000 mm free fall with wooden 150000

apparatus) platform 13mm, 19mm,20mm capacity 200 kg Qty-1 Set

17 Hot air oven --- Do --- --- Do --- Digital Temp. Controller PID with hour 99999 hour 650000 Qty-4 Set with Air Circulation

1 - upto 150°C 18X18X18" ( )\ \-.x-- 2 - upto 150°C 18X24X 18"

(~ -::2-- - - 6>'1 b VJ

3 - upto 100°C 24X24X24" 4 - upto 100°C 24X36X24"

1 Deep Freezer --- Do --- --- Do --- Digital Temp. Controller with hour meter SS-304 650000 Qty-2 Set 1 -upto-30°C 20X20X20"

2 - upto -50°C 20X20X20" 1 ~ Vibration machine --- Do --- --- Do --- 1.5 Ton = 22K 2500000

Qty-1 Set 2D Shock Machine -- Do --- --- Do --- 200g, 50 kg = 5K 800000

Qty-1 Set 2 Discharging Load --- Do --- --- Do --- Constance Current with and of Discharge Facility- 450000

Qty-1 Set 60 Volt, 60Amp = 2X1.5Kconstant current ,Constant voltage Digital with accuracy 0.5% input 230 volt AC 50 HZ

2~ CC/CV charger power --- Do --- --- Do --- CC/CV Charger power Supply 650000 supply 1 - 25 Volt, 250A Qty-1 Set 2 - 100 Volt 100A

3 - 25 Volt 250A 4 - 35 Volt 450A constant current ,Constant voltage Digital with accuracy 0.5% input 230 volt AC 50 HZ

2~ Temperature data --- Do --- --- Do --- Temperature Data Logger - 350000 logger 20 channel 20 channel J,K,PT-1 00, Qty-2 Set

2~ High voltage Tester Energy IEC: 62133 (part- 1, IEC: 62133 (part- 1, part-2) 65000 (AC) meter part-2) Qty-1 Set testing

facilities as per IS: 13010-2002:

2~ Insulation tester --- Do --- IEC: 62133 (part- 1, IEC: 62133 (part- 1, part-2) 45000 Otv-t Set part-2)

2p Test Bench Load With --- Do --- IEC: 62133 (part- 1, IEC: 62133 (part- 1, part-2) 1000000 Phantom System, part-2) Reference Standard Meter Qty-1 Set

L Power Meter --- Do --- IEC: 62133 (part- 1, IEC: 62133 (part- 1, part-2) 350000 Qty-1 Set part-2)

La Voltage Drop --- Do --- IEC: 62133 (part- 1, IEC: 62133 (part- 1, part-2) 45000 Simulation part-2) Qty-1 Set

L9 Shock Test Device --- Do --- IEC: 62133 (part- 1, IEC: 62133 (part- 1, part-2) 250000 Qty-1 Set part-2)

~O Vibration Test Device --- Do --- IEC: 62133 (part- 1, IEC: 62133 (part- 1, part-2) 350000 Qty-1 Set part-2) Spring Hammer Test --- Do --- IEC: 62133 (part- 1, IEC: 62133 (part- 1, part-2) 15000 Drive part-2) Qty-1 Set

~2 Short time Over --- Do --- IEC: 62133 (part- 1, IEC: 62133 (part- 1, part-2) 250000 current Tester part-2) Qty-1 Set

3 ENDURANCE TEST MCB testing IS/IEC: 60898-1- .5AMP-65A THREE PHASE 580000 Qty-1 Set facilities 2015 2.5N65A load, without voltage controller servo,

Inductive load/Resistive load arrangement one volt meter, 3No. Amp meter, one power factor 3No, counter meter MCB ON OFF FIXTURE - Mechanical Three sample on/off DC Drive, Three sample Timer Range 99.99 sec Digital Counter Range 999999 Count Digital

4 Shock test apparatus --- Do --- IS/IEC: 60898-1- SHOCK TEST APP- 45000 Qty-1 Set 2015 Counter Range 999999 with ,D.C motor

5 28 days test/temp. rise --- Do --- IS/IEC: 60898-1- 1.LOAD-0.5-65Amp meter, 0.5-65NO.1 class 0.5 285000 test apparatus Qty-1 2015 % Set 2. Digital Temp. Data logger 0-300 deg/1.0 deg 16

channel with data storage excel sheet print 4.Digital Timer meter Rang 99.99 hour /0.1 hour battery backup 6.Digital Time totalizer Range 999999 hour/1 h battery backup, 7.milli volt meter 199.9 m.volt , 8.volt meter Range 0-100 V Digital Accu.0.5%,

~ with wooden stand, all meter Digital, ~rl\ Input 230 volt AC 50HZ.

~ -'3- o q \ "._D

~--------------------

36 CALIBRATION TEST --- Do --- IS/IEC: 60898-1- Amp meter 0.5-300AlO.1 amp Digital Accu.0.5% 105000 BENTCH 2015 Timer meter--99.99 second, Digital ACCuO.5% Qty-1 Set with battery backup

Amp constant 1.15-1.25 setting with CVITesting Probe

37 MAGNATIC TEST --- Do --- IS/IEC: 60898-1- Transient Amp meter 0.5-800AlO.1 amp Digital 148000 BENTCH 2015 Accu.0.5% Qty-1 Set Timer meter-9.999 second, Digital ACCuO.5%

with battery backup Amp constant 2.5-5.0-10.0 time setting with CVITesting Probe

38 Rail mounting test --- Do --- IS/IEC: 60898-1- Rail mounting test 35000 system 2015 with weight 4.0,5.0,6.0 10.0 kg Qty-1 Set

39 Cord grip test --- Do --- IS/IEC: 60898-1- Cord grip test 45000 Qty-1 Set 2015 Calibration weight 1.0,2.0,3.0 6.0.-,8.0,10.0 kg

with motorized on /off fixture 40 MULTI TEST PANEL Information IS:13252, FITTED WITH 25 AMPS.280 VOLT VARIAC 0- 105000

Qty-1 Set technology IS:616, 600volt,0-20amp,5000w,Hz,Power Factor,O- (IT) product IS: 1 0322--5-3 9.99v,0-50 ampECR.Test,lsolating,0-5 amp,O-

testing IS:16102, 1250watt,Finger 0-99.9v,2-100 mega ohm IR low facilities IS:15885 Range /High Rage Watt meter,

IS:302-2-25, IS:302-2-26 IS:16242

41 GLOW WIRE TEST --- Do --- --- Do --- AS PER IS (11 000,P-2/SEC-1 ,2008) with Enclose 150000 APPARATUS 800mmx800mmx800mm Qty-1 Set Complete Automatic with PLC HMI

42 DIGITAL TEMP. --- Do --- --- Do --- 40-600 degree 16 channel programmable input 70000 INDICATOR CUM data logging and scanning DATA LOGGER Qty-1 Set

43 CORD GRIP & PULL --- Do --- --- Do --- 6 kg weight, With motorized 36000 TEST APPARATUS Qty-1 Set

44 DEAD WEIGHTS Qty- --- Do --- --- Do --- up to 30Kg 10000 1 Set

45 TRACKING TEST --- Do --- --- Do --- PLC BASED With Electrode Platinum, PLC Delta 350000 (PLC BASED) ,600volt, 5 amp, with safety probe Qty-1 Set

46 Digital push pull force --- Do --- --- Do --- 0-500 N L.C 0.01 N 45000 gauge Qty-1 Set

47 NEEDLE FLAME --- Do --- --- Do --- with butane gas container 150 ml As per IS 350000 TESTAPPARATUS (11 000P-2/SEC-2) Complete Automatic with PLC Qty-1 Set HMI

48 MANDREL TEST --- Do --- --- Do --- as per is 13252 fig (AA.1) with weight 150N 45000 APPARATUS Qty-1 Set

49 DIELECTRIC --- Do --- IS:13252, as per fig.pic 35000 STRENGTH TEST IS:616, APPARATUS IS:10322, Qty-1 Set IS:16102,

IS:15885 IS:302-2-25, IS:302- 2-26 IS:16242

50 DEVICE FORMING A --- Do --- --- Do --- as per fig. 40000 PART OF MAINS PLUG Qty-1 Set

51 FUNCTION --- Do --- IS:13252 2 Hz to 2 M Hz frequency with various selection 152000 GENERATOR switch Qty-1 Set

52 OSCILLOSCOPE Qty- --- Do --- IS:13252, 100 MHz, 2 channel 56500 1 Set IS:616,

IS:10322, IS:16102, IS:15885 IS:302-2-25, IS:302-2-26 - IS:16242

53 D.C POWER --- Do --- --- Do --- 150 VDC 10AMP 45000 SOURCE n .-\---;- Qty-1 Set

-4- ~. V' C'\.J...lA

-r: ~_:c

. .

~4 FILLER GAUGE Qty-1 --- Do --- --- Do --- 01-1.0mm 8500 Set

~5 DROP TEST APP. --- Do --- --- Do --- 1 meter height 145000 Qty-1 Set

~6 High Pot Tester --- Do --- --- Do --- 0-5 Kv dc, 0-200 mA, with insulated test probes 45000 Qty-1 Set

7 VICAT SOFTENING --- Do --- IS:13252 0-200 degree, Lc 0.1 degree, 0-1 mm penetration 85000 TEST APP. depth, with magnetic stirrer Qty-1 Set

8 HOT AIR OVEN --- Do --- IS:13252, Size-6X4X3 Fit Temp. Controller meter Range 375000 Big Size IS:616, (0-200) ± 1°C, S.S, outer size S.S, air circulation Qty-1 Set IS: 1 0322--5-3 with air

IS:15885 Circulation with PLC Data Storage And Graf IS:302-2-25, IS:302-2-26 IS:16242

9 BALL PRESSURE --- Do --- --- Do --- 0-20 N & 5 mm Dai 35000 TEST APP. Qty-1 Set

0 ABRASION TEST --- Do --- --- Do --- Test load 40 N, with scratch pin, Scratch distance 85000 APP. automatically designed Qty-1 Set

1 HUMIDITY CHAMBER --- Do --- --- Do --- Amb to 95% Rh, & Amb to 30 degree Temp with 865000 Big Size auto controller Qty-1 Set Size-6X4X3 Fit

2 TEST FINGER --- Do --- --- Do --- Dimension: 30X80 MM 4500 Qty-1 Set

3 TEST FINGER --- Do --- --- Do --- Dimension: 50X100 MM 4500 Qty-1 Set

4 TEST FINGER --- Do --- --- Do --- Dimension: 12X80 MM 4500 Qty-1 Set

5 TEST FINGER --- Do --- --- Do --- Dimension: 1 OX1 05 MM 4800 Qty-1 Set

6 TEST FINGER --- Do --- --- Do --- Dimension: 4X100 MM 4600 Qty-1 Set

7 TEST FINGER --- Do --- --- Do --- Dimension: 2X100 MM 4600 Qty-1 Set

8 TEST FINGER --- Do --- --- Do --- Dimension: 1X100 MM 4600 Qty-1 Set

9 TEST FINGER --- Do --- --- Do --- Dimension: 2.8X610 MM 5200 Qty-1 Set

0 TEST FINGER --- Do --- --- Do --- Dimension: 4.3X610 MM 5200 Qty-1 Set

1 TEST FINGER --- Do --- --- Do --- Dimension: 12X105MM 5200 Qty-1 Set

2 TEST PLUG FOR --- Do --- IS:616 As per dimension, as per is 616 fig (9) 30000 ANTENNA COAXIAL SOCKETS Qty-1 Set

3 High frequency Spark --- Do --- IS:13252 Fully Spark based with insulated probes 45500 Generator Qty-1 Set

4 Bump Test App. Qty-1 --- Do --- IS:616 50 mm Amplitude, with Counter meter 0-99999 260000 Set counts

5 Tumbling Barrel Qty-1 --- Do --- IS:616 As per dimension, 0-9999 Rotation 20000 Set

6 Dead Weights --- Do --- --- Do -- upto 200 N 4500 Qty-1 Set

7 L C R-Q Meter --- Do --- IS:13252, 0-2000MO,O-2000Farad, 0-2000H 47000 Qty-1 Set IS:616,

IS: 1 0322--5-3 . IS:15885 IS:302-2-25, IS:302-2-26 IS:16242

8 Automatic Adaptor --- Do --- IS:13252 0-2 Amp, CC & CV Type 185000 Testing System As per Req Qty-1 Set

9 Micro-Ohm Meter Qty- --- Do --- IS:302-2-25 o to 19.99 KO 3700 1 Set

0 Draught Free Oven --- Do --- IS:13252, 0-150 degree, with PID controller 185000 Qty-1 Set IS:616,

IS:10322, O~ ~ IS:15885

~I~ - - 5"--

IS:302-2-25, IS:302-2-26 IS:16242

81 Million Mega ohms --- Do --- --- Do --- 500/1000 VDC 0-20000 Mega ohm 34500 Meter Qty-1 Set

82 Push pull switch --- Do --- --- Do --- 20 N with Pneumatic on/off system 185000 Endurance Test Qty-1 Set

83 Turning Table --- Do --- --- Do --- 0-360 degree rotation in built motor with speed 55000 Qty-1 Set control option

84 Dead Weight --- Do --- --- Do --- 1 kg,2kg,5,kg 5000 Qty-1 Set

85 Sieves Abrasion Test --- Do --- --- Do --- Digital Counter mete Range -999999 DC 55000 Qty-1 Set motorized sieves

86 RLC LOAD --- Do --- IS:16242 12.5kva Resistive/inductive capacitive 515000 Qty-1 Set With2_ower volt, amp, watt,_j)f.hz

87 Non Liner Load Qty-1 --- Do --- IS:16242 12.5kva Reisitve/inductive capacitive 695000 Set With power volt, amp, watt,_j)f.hz

88 Back Feed Protection --- Do --- IS:16242 22 nf capacitor 55000 Qty-1 Set

89 HALOGEN ACID GAS Halogen IS: 694, IS: 7098-1 As per IS: 10810 (Part-59) IEC: 754-1994 350000 GENERATION TEST acid and IS: 1554-1 For Test on Gases Evolved During Combustion of APPARATUS Evolution Materials from Cables. Temp. Range 1000 Deg, Qty-1 Set test of with chemical

electric cables

90 Chromaticity test Domestic IS 302-2-7, IS: 6290, IS 302-2-7, IS: 6290, IS: 15809-2017 and IS: 302- 150000 equipment with electric IS: 15809-2017 and 2-7 Spectrometer, clothes IS: 302-2-7 Illuminator, washing dispersive element machines and detector, and steam Standards- White and electric iron Black testing Qty-2 Set including facilities Auxiliaries and accessories

91 Rubbing finger as per --- Do --- IS 302-2-7, IS: 6290, IS 302-2-7, IS: 6290, IS: 15809-2017 and IS: 302- 25000 4.1.2 of IS 766, grating IS: 15809-2017 and 2-7 of stainless steel wire, IS: 302-2-7 grey scale for evaluation of staining, rubbing cotton cloth Qty-1 Set

92 Test device as per --- Do --- IS 302-2-7, IS: 6290, IS 302-2-7, IS: 6290, IS: 15809-2017 and IS: 302- 350000 IS/ISO 105-E04, IS: 15809-2017 and 2-7 Oven, L-histidine IS: 302-2-7 monohydrochloride monohydrate, sodium chloride, disodium hydrogen orthophosphate dehydrate, sodium hydroxide, multi fiber adjacent fabric complying with ISO 1 05-F1 0 or Two single-fiber adjacent fabrics, complying with the relevant document selected from ISO 105-F01 to F07, Grey scale for assessing change in colour . Qty-1 Set

93 Laundry device as per --- Do --- IS 302-2-7, IS: 6290, IS 302-2-7, IS: 6290, IS: 15809-2017 and IS: 302- 250000 IS/ISO 105 C06, IS: 15809-2017 and 2-7 stainless steel balls, IS: 302-2-7 Adjacent fabrics, AATCC/ECE/IEC Reference detergent, Sodium Hypochlorite, _0 \ Grade 3 water, Grey r'\ ,

-6- ~~ 0

. . scale for assessing change in color and staining Qty-1 Set

9 Laundry device, --- Do --- IS 302-2-7, IS: 6290, IS 302-2-7, IS: 6290, IS: 15809-2017 and IS: 302- 250000 Glass/SS Container, IS: 15809-2017 and 2-7 SS Discs, Undyed IS: 302-2-7 cotton twill cloth, grey scales, Glass tubes 25mm dia, Perchlorethylene or any other solvent for dry cleaning Qty-1 Set

9 Heating Device as per --- Do --- IS 302-2-7, IS: 6290, as per 4.1 of IS 689/ Household Iron 10000 4.1 of IS 689/ IS: 15809-2017 and Household Iron (in IS: 302-2-7 case household iron IS) Qty-1 Set

9{ Test device as per --- Do --- IS 302-2-7, IS: 6290, IS 302-2-7, IS: 6290, IS: 15809-2017 and IS: 302- 150000 IS/ISO 1 05-E01, IS: 15809-2017 and 2-7 Oven, Adjacent fabric, IS: 302-2-7 Grey scales for assessing change in colour (ISO 105 A01) and staining (ISO 105 A03), Analytical balance, Spectrophotometer / Colorimeter, Grade 3 water Qty-1 Set

9, Xenon arc lamp, Light --- Do --- IS 302-2-7, IS: 6290, IS 302-2-7, IS: 6290, IS: 15809-2017 and IS: 302- 55000 Filter, Opaque IS: 15809-2017 and 2-7 cardboard, Grey scale, IS: 302-2-7 Heat filter, Black panel thermometer, Standard Patterns (5.1,5.2 of IS 2454) Qty-1 Set

9E Retro reflect meter --- Do --- IS 302-2-7, IS: 6290, IS 302-2-7, IS: 6290, IS: 15809-2017 and IS: 302- 150000 Qty-1 Set IS: 15809-2017 and 2-7

IS: 302-2-7 9~ Type A Washing --- Do --- IS 302-2-7, IS: 6290, as per IS 15370 250000

machine, Ballast, IS: 15809-2017 and Detergents, Facility to IS: 302-2-7 line dry/drip dry/Flat dry/Hot presslTumble dry, as per IS 15370, Qty-1 Set

10 washing machine, --- Do --- IS 302-2-7, IS: 6290, IS 302-2-7, IS: 6290, IS: 15809-2017 and IS: 302- 65000 tetra chloro ethene, IS: 15809-2017 and 2-7 sorbiton mono oleate, IS: 302-2-7 iron, steam press, mannequin/cabinet Qty-1 Set

10 Apparatus for wet --- Do --- IS 302-2-7, IS: 6290, IS 302-2-7, IS: 6290, IS: 15809-2017 and IS: 302- 105000 retroreflection test as IS: 15809-2017 and 2-7 per Fig 5, Retro IS: 302-2-7 reflectometer Qty-1 Set

10 Bursting tester as per --- Do --- IS 302-2-7, IS: 6290, IS 302-2-7, IS: 6290, IS: 15809-2017 and IS: 302- 65000 IS hydraulic/pneumatic IS: 15809-2017 and 2-7 Qty-1 Set IS: 302-2-7

10 Measurement of --- Do --- IS 302-2-7, IS: 6290, IS 302-2-7, IS: 6290, IS: 15809-2017 and IS: 302- 65000 testing temp. Drop IS: 15809-2017 and 2-7 Under load IS: 302-2-7 Copper plate 10 mm. to 15 mm. with cooling tank as per CI 6290, CI 106 Fig. 105 Qty-1 Set

10 Measurement of --- Do --- IS 302-2-7, IS: 6290, IS 302-2-7, IS: 6290, IS: 15809-2017 and IS: 302- 250000 steaming IS: 15809-2017 and 2-7 \) ~ As per IS: 6290 CI. IS: 302-2-7

~~ -7-- C9 :;2.0

..

108 with Temp. profiler HMI PLC based Qty-1 Set

105 Apparatus for --- Do --- IS 302-2-7, IS: 6290, IS 302-2-7, IS: 6290, IS: 15809-2017 and IS: 302- 150000 measurements of IS: 15809-2017 and 2-7 Steaming time and IS: 302-2-7 Steaming Rate Fig. 106 CI. 108 Qty-1 Set

TOTAL 2,95,75,852/-

-~-