2nd edition brochure 805-1180 capbro 1-8

8/2/2019 2nd Edition Brochure 805-1180 CapBro 1-8

1/8


2/8


3/8


4/8

Covered Reactorfor heat and odorcontainment.

ControlledFoam Layerfor importantinsulation at liquid surface where highestamount of heat loss due to evaporationcan occur.

Tank Walldesigned toretain heatgeneratedin process.

The Foam Cone System

captures the foam, ruptures the

air bubbles, and re-entrains the

mixture into the reactor.

Field-Proven BiofilterThermal ProcessSystems' field-proven Biofilter technologyis specifically designed to efficiently andreliably remove ammonia, a naturalby-product of superior VS reduction.The Biofilter is included as an integralcomponent of the system.

Corrosion-resistantin-basin components.


5/8

Assured Product Quality With No Compromises

With the patented ThermAer process, you can achieve the

results you want without compromising your quality or cost

objectives. The system delivers superior volatile solids

reduction, extremely low odor, pathogen kills in a single reactor

and, where required or desired, assured EPA Class A certification.

Proprietary Flexible-Flow Jet Aerators are the heart of the

ThermAer System.

The ThermAer system uses

Conventional Out-of-Basin

Pumps and Air Compressors

already familiar to operating

and maintenance staff.

Bottom-upJet Aeration System provides more efficient mixing in

the reactor with 3-4% solids concentration or more. Mounted on

bottom with no moving parts inside the basin.

The ThermAer System

Your system will be custom-engineered

to fit your needs exactly, whether you

would like to retrofit your existing basins

or integrate ThermAer into your new

system. In typical installations, such as

the one illustrated here, you will batch

feed the process daily, after thickening

the feed bio-solids.

Out-of-basin Pumpsand Blowersmounted at gradefor easy access.


6/8


7/8


8/8

Thermal Process Systems was founded by experienced

wastewater treatment professionals who understand first

hand the complex issues of bio-solids processing and re-use.

Frustrated by the compromises that were necessary with

existing systems and the inability of these processes to

meet industry demand they formed their own company

focused exclusively on bio-solids management. Their first

challenge: to develop a more reliable, more efficient process

for the production of high quality bio-solids. The result is theproprietary ThermAer process. ThermAer has been

subjected to rigorous field testing in full scale operating

systems, and pilot testing at various sites since 1995.

It has exceeded every customer expectation.

In addition to the proprietary ThermAer process,

Thermal Process Systems has also established relationships

with the most respected equipment manufacturers in the

industry today. It is an unmatched combination, offering you

complete systems integration, from retrofit to ground upinstallation and control.

The rmAe r

TRULY Aerobic Bio-Solids Reduction

The Experience to Know What Works. The Innovation to Make it Work Better.

Call today for a no obligation analysis of your bio-solids management needs.

219-663-1034

Bio-Solids Management Process Comparison Matrix

PROCESS

Recycle Stream Off-Gas

Class AProduct

SignificantNutrient

LowCOD

HighVolatileSolids

Reduction

Low toModerateEnergy

Use Ammonia MethaneReduced

SulfurRetrofitPotential

SimpleOperation

ThermAer

ConventionalATAD

AnaerobicDigestion

LimeStabilization

ThermalDrying

Composting

21 2 S. Main St., Suite 2 Crown Point, IN 46 30 7-43 65

Tel: 219 -663-1034 Fax: 219 -663 -7248

www.Therma lProcess.com E-mail: [email protected]

Patent No.s: 5,948,261 6,168,717 6,203,701

2nd edition brochure 805-1180 capbro 1-8

Documents