2dca3(b) dtp with pagemaker & photoshop unit -2€¦ · 2dca3(b) dtp with pagemaker &...
TRANSCRIPT
2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP
2DCA3(B)
DTP WITH PAGEMAKER & PHOTOSHOP
UNIT -2
2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP
UNIT -2 Adobe PageMaker
2.1 INTRODUCTION
Adobe PageMaker is the “world‟s leading cross- platform professional page layout
software”. PageMaker is primarily used for designing and producing publication that
requires a combination of text and graphics. PageMaker has a rich array of facilities to
import text and artwork from other computer application packages, as well as allowing you
to generate these directly from within PageMaker itself. PageMaker can handle text better
than Illustrator and Photoshop and also give you the flexibility of graphic control not
available in word processors.
एडोफ ऩजभकय "दननमा का परभख करॉस-परटफॉभम ऩशवय ऩज रआउट सॉफटवमय" ह। ऩजभकय भखम रऩ स डडजाइन औय परकाशन क लरए उऩमोग ककमा जाता ह जजसभ ऩाठ औय गराकपकस क सॊमोजन की आवशमकता होती ह। ऩजभकय क ऩास अनम कॊ पमटय एजपरकशन ऩकजो स टकट औय कराकनत आमात कयन क लरए सववधाओॊ का एक सभदध सयणी ह, साथ ही आऩको सीध ऩजभकय क बीतय स इनह उतऩनन कयन की अनभनत ह। ऩजभकय टकट को इररटय औय पोटोशॉऩ स फहतय तयीक स हडर कय सकता ह औय आऩको गराकपक कॊ रोर की सववधा बी दता ह जो वडम परोससय भ उऩरबध नहीॊ ह।
2.2 Aldus & Adobe PageMaker
PageMaker was the first desktop publishing program, introduced in 1985 by Aldus
Corporation, initially for the Apple Macintosh but soon after also for the PC. It relies
on Adobe Systems' PostScript page description language. In 1994 Aldus and PageMaker
were acquired by Adobe Systems. PageMaker was awarded a SPA Excellence in Software
Award for Best New Use of a Computer in 1986.
ऩजभकय ऩहरा ड कटॉऩ ऩजबरलशॊग परोगराभ था , जो 1985 भ एलडस कॉऩोयशन दवाया शर ककमा गमा था , शरआत भ ऐपऩर भककनटोश क लरए रककन जलद ही ऩीसी क लरए बी। मह एडोफ लसटमस क ऩोटजकरपट ऩषठ वववयण बाषा ऩय ननबमय कयता ह। 1994 भ एडोफ लसटमस दवाया एलडस औय ऩजभकय का अधधगरहण ककमा गमा था। ऩजभकय को
2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP
1986 भ एक कॊ पमटय क सवमशरषठ नए उऩमोग क लरए सॉफटवमय उतकषटता भ एसऩीए उतकषटता स समभाननत ककमा गमा था।
2.3 Previous and current versions of page maker
Aldus Pagemaker 1.0 was released in July 1985 for the Macintosh and in December
1986 for the IBM PC.
एलडस ऩजभकय 1.0 को जराई 1985 भ भककॊ टोश क लरए औय ददसॊफय 1986 भ आईफीएभ ऩीसी क लरए जायी ककमा गमा था।
Aldus Pagemaker 1.2 for Macintosh was released in 1986 and added support for
PostScript fonts built into LaserWriter Plus or downloaded to the memory of other
output devices. PageMaker was awarded a Codie award for Best New Use of a Computer
in 1986. In October 1986, a version of Pagemaker was made available for Hewlett-
Packard's HP Vectra computers. In 1987. Pagemaker was available on Digital
Equipment's VAXstation computers.
भककॊ टोश क लरए एलडस ऩजभकय 1.2 को 1986 भ जायी ककमा गमा था औय रजयवटय परस भ ननलभमत ऩोटजकरपट पोट क लरए सभथमन जोडा गमा था मा अनम आउटऩट डडवाइसो की भभोयी भ डाउनरोड ककमा गमा था। ऩजभकय को 1986 भ कॊ पमटय क सवमशरषठ नए उऩमोग क लरए कोडी ऩयकाय स समभाननत ककमा गमा था। अकटफय 1986 भ, हवरट-ऩकडम क एचऩी वकरा कॊ पमटयो क लरए ऩजभकय का एक सॊकयण उऩरबध कयामा गमा था। 1987 भ। ऩजभकय डडजजटर उऩकयण क वकसटशन कॊ पमटय ऩय उऩरबध था।
Aldus Pagemaker 2.0 was released in 1987. Until May 1987, the initial Windows release
was bundled with a full version of Windows 1.0.3; after that date, a "Windows-runtime"
with no task-switching capabilities was included. Thus, users who did not have
Windows could run the application from MS-DOS.
एलडस ऩजभकय 2.0 को 1987 भ जायी ककमा गमा था। भई 1987 तक, परायॊलबक ववॊडोज रयरीज को ववॊडोज 1.0.3 क ऩणम सॊकयण क साथ फॊडर ककमा गमा था , उस तायीख क
2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP
फाद, "वव ॊडोज-यनटाइभ" जजसभ कोई कामम-जवधचॊग भताओॊ को शालभर नहीॊ ककमा गमा था। इस परकाय , जजन उऩमोगकतामओॊ क ऩास ववॊडोज नहीॊ था , व एभएस-डॉस स एजपरकशन चरा सकत थ।
Aldus Pagemaker 3.0 for Macintosh was shipped in April 1988. PageMaker 3.0 for the
PC was shipped in May 1988 and required Windows 2.0, which was bundled as a run-
time version. Version 3.01 was available for OS/2 and took extensive advantage of
multithreading for improved user responsiveness.
भककनटोश क लरए एलडस ऩजभकय 3.0 अपरर 1988 भ बजा गमा था। ऩीसी क लरए ऩजभकय 3.0 को भई 1988 भ बज ददमा गमा था औय इसक लरए ववॊडोज 2.0 की आवशमकता थी, जजस यन-टाइभ सॊकयण क रऩ भ फॊडर ककमा गमा था। सॊकयण 3.01
ओएस / 2 क लरए उऩरबध था औय फहतय उऩमोगकताम जवाफदही क लरए भलटीथरडड ॊग का वमाऩक राब उठामा।
Aldus PageMaker 4.0 for Macintosh was released in 1990 and offered new word-
processing capabilities, expanded typographic controls, and enhanced features for
handling long documents. A version for the PC was available by 1991.
भककॊ टोश क लरए एलडस ऩजभकय 4.0 को 1990 भ जायी ककमा गमा था औय रॊफ दतावजो को सॊबारन क लरए नई वडम-परोसलसॊग भताओॊ , ववतारयत टाइऩोगराकपक ननमॊतरण औय ववतारयत सववधाओॊ की ऩशकश की गई थी। ऩीसी क लरए एक सॊकयण 1991 तक उऩरबध था।
Aldus PageMaker 5.0 was released in January 1993.
एलडस ऩजभकय 5.0 जनवयी 1993 भ जायी ककमा गमा था।
Adobe PageMaker 6.0 was released in 1995, a year after Adobe Systems acquired
Aldus Corporation.
एडोफ लसटमस दवाया एलडस कॉऩोयशन का अधधगरहण कयन क एक सार फाद 1995
भ एडोफ ऩजभकय 6.0 जायी ककमा गमा था।
2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP
Adobe PageMaker 6.5 was released in 1996. Support for versions 4.0, 5.0, 6.0 and 6.5
are no longer offered through the official Adobe support system. Due to Aldus' use of
closed, proprietary data formats, this poses substantial problems for users who have
works authored in these legacy versions.
एडोफ ऩजभकय 6.5, 1996 भ जायी ककमा गमा था। सॊकयण 4.0, 5.0, 6.0 औय 6.5 क लरए सभथमन अफ आधधकारयक एडोफ सभथमन परणारी क भाधमभ स ऩश नहीॊ ककमा गमा ह। एलडस क फॊद , भालरकाना डटा वरऩो क उऩमोग क कायण , मह उन उऩमोगकतामओॊ क लरए कापी सभमाएॉ खडी कयता ह , जजनक ऩास इन ववयासत सॊकयणो भ काभ कयन वार रखक ह।
Adobe PageMaker 7.0 was the final version made available. It was released 9 July
2001, though updates have been released for the two supported platforms since. The
Macintosh version runs only in Mac OS 9 or earlier; there is no native support for
Mac OS X, and it does not run on Intel-based Macs without SheepShaver. It does not
run well under Classic, and Adobe recommends that customers use an older Macintosh
capable of booting into Mac OS 9. The Windows version supports Windows XP, but
according to Adobe, "PageMaker 7.x does not install or run on Windows Vista."
एडोफ ऩजभकय 7.0 अॊनतभ सॊकयण उऩरबध कयामा गमा था। मह 9 जराई 2001 को जायी ककमा गमा था , हाराॊकक दो सभधथमत परटपाभो क लरए अऩडट जायी ककए गए ह। Macintosh सॊकयण कवर Mac OS 9 मा ऩवम भ चरता ह ; भक ओएस एकस क लरए कोई दशी सभथमन नहीॊ ह , औय मह शीऩशावय क बफना इॊटर-आधारयत भक ऩय नहीॊ चरता ह। मह करालसक क तहत अचछी तयह स नहीॊ चरता ह , औय एडोफ अनशॊसा कयता ह कक गराहक भक ओएस 9 भ फट कयन भ सभ ऩयान भककनटोश का उऩमोग कय। वव ॊडोज सॊकयण ववॊडोज एकसऩी का सभथमन कयता ह , रककन एडोफ क अनसाय ,
"ऩजभकय 7.x वव ॊडोज ववटा ऩय इॊटॉर मा यन नहीॊ कयता ह । "
2.4 PageMaker as DTP Software
2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP
PageMaker is one of the first Desktop Publishing (DTP) software introduced
three decades ago. It is a page layout application, commonly used in the Print Media,
Publication Industry, Advertising, Graphic Designing and every other domain where paper
printing is a common practice
ऩजभकय तीन दशक ऩहर ऩश ककए गए ऩहर ड कटॉऩ ऩजबरलशॊग (डीटीऩी) सॉफटवमय भ स एक ह। मह एक ऩज रआउट एजपरकशन ह , जो आभतौय ऩय वपरॊट भीडडमा, परकाशन उदमोग , ववऻाऩन, गराकपक डडजाइननॊग औय हय दसय डोभन भ उऩमोग ककमा जाता ह जहाॊ ऩऩय वपरॊदटॊग एक आभ फात ह
2.5 Attribute settings
2.5.1 Tools
UNDERSTANDING PAGEMAKER TOOLS
TOOL BOX
Toolbox contains all
the tools used to create a
publication in PageMaker. Choose
Window and select Show Tools to
display the toolbox. The individual
tools will be explained in detail.
टरफॉकस भ ऩजभकय भ परकाशन फनान क लरए उऩमोग ककए जान वार सबी उऩकयण शालभर ह। टरफॉकस परदलशमत कयन क लरए ववॊडो चन औय शो टर चन। वमजकतगत उऩकयण क फाय भ ववताय स फतामा जाएगा।
2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP
ZERO POSITION
Zero Position allows you to set the zero position on the screen. Zero
position is the position, where both the top
and the left side rules are at zero. By Zero
positioning all measurements in the pages are
made relative to this point. Click it and drag it
to anywhere on the workspace to set it as the
Zero Point.
शनम जथनत आऩको करीन ऩय शनम जथनत सट कयन की अनभनत दती ह। शनम जथनत वह जथनत ह , जहाॊ शीषम औय फाई ओय क ऩभाना दोनो शनम ऩय ह। जीयो ऩोजजशननॊग दवाया ऩषठो भ सबी भाऩ इस बफॊद क साऩ फनाए जात ह। इस जकरक कय औय इस शनम बफॊद क रऩ भ सट कयन क लरए कामम तर ऩय कहीॊ बी खीॊच।
POINTER TOOL
Pointer tool is used to pick, drag and drop graphics and text.
गराकपकस औय टकट को चनन, खीॊचन औय छोडन क लरए ऩॉइॊटय टर का उऩमोग ककमा जाता ह।
TEXT TOOL
Text Tool is used to edit and select text and insert text frames. Click the
text tool and click anywhere in the document and start entering text. The text tool is
creating a free flowing text box.
2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP
टकट टर का उऩमोग टकट को एडडट औय सरकट कयन औय टकट फरभ डारन क लरए ककमा जाता ह। टकट टर ऩय जकरक कय औय दतावज भ कहीॊ बी जकरक कय औय टकट दजम कयना शर कय। टकट टर एक फरी फरो टकट फॉकस फनाता ह।
ROTATE TOOL
Rotate tool is used to rotate text and
graphic objects. Click the rotate tool. Then
click on the object reference point and drag
to rotate the object.
योटट टर का उऩमोग टकट औय गराकपक ऑबजकट को घभान क लरए ककमा जाता ह। योटट टर ऩय जकरक कय। कपय ऑबजकट सॊदबम बफ ॊद ऩय जकरक कय औय ऑबजकट को घभान क लरए खीॊच।
CROP TOOL
The Crop tool is used to crop imported graphic images to the required size.
The crop tool only works on TIFF type of images. Click on the tool and, drag the
image handles, to crop the image.
2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP
करॉऩ टर का उऩमोग आमानतत धचतरो को आवशमक आकाय भ करॉऩ कयन क लरए ककमा जाता ह। करॉऩ टर कवर TIFF परकाय की छववमो ऩय काभ कयता ह। टर ऩय जकरक कय औय इभज को करॉऩ कयन क लरए , इभज हडर को डरग कय।
OBLIQUE LINE TOOL
Oblique Line is used to draw
slanting lines. To draw a line, click the
oblique line tool, click and drag to draw a
line in any direction.
नतयछी यखाओॊ को खीॊचन क लरए ओजबरक राइन का उऩमोग ककमा जाता ह। एक यखा खीॊचन क लरए, ओजबरक राइन टर ऩय जकरक कय , ककसी बी ददशा भ एक यखा खीॊचन क लरए जकरक कय औय खीॊच।
CONSTRAINED LINE TOOL
Constrained Line tool will
draw lines at 45 degree intervals, i.e.,
horizontally, vertically or diagonally.
कनरनड राइन टर 45 डडगरी
2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP
क अॊतयार ऩय राइन खीॊचगा, अथामत, नतज रऩ स, रॊफवत मा नतयछ।
BOX TOOL
Box tool is used to draw a box.
Click and drag to draw a Box in
any direction.
फॉकस को फनान क लरए फॉकस टर का उऩमोग ककमा जाता ह। ककसी बी ददशा भ फॉकस फनान क लरए जकरक कय औय खीॊच।
RESTANGLE FRAME
Rectangle Frame is used to type text inside a box. First select the tool and
draw the area to be enclosed by the rectangular frame, then select the text tool and
click inside the drawn frame to enter text.
The text will be constrained to the
rectangular frame.
आमत फरभ का उऩमोग ककसी फॉकस क अॊदय टकट टाइऩ कयन क लरए ककमा जाता ह। ऩहर टर का चमन कय औय आमताकाय फरभ दवाया सॊरगन ककए जान वार तर को डरा कय , कपय टकट टर चन औय टकट को दजम कयन क लरए खीॊच गए फरभ क अॊदय जकरक कय। टकट आमताकाय फरभ भ दजम हो जामगा।
2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP
CIRCLE TOOL
Circle tool is used to draw a
circle or elliptical graphic. To draw a circle
or an ellipse, select the tool, click and drag
to draw a circle on the document.
सकम र टर का उऩमोग सकम र मा अणडाकाय गराकपक खीॊचन क लरए ककमा जाता ह। एक वतत मा दीघमवतत खीॊचन क लरए, टर का चमन कय , दतावज ऩय एक वतत खीॊचन क लरए जकरक कय औय खीॊच।
CIRCULAR FRAME
Circular Frame is used to type text inside a circle or an oval. Use the
Circular frame tool to draw the frame and
then click inside with the text tool to start
entering text. The entered text will be
constrained to the circular frame.
सकम रय फरभ का उऩमोग सकम र मा अॊडाकाय क अॊदय टकट टाइऩ कयन क लरए ककमा जाता ह। फरभ को खीॊचन क लरए सकम रय फरभ टर का उऩमोग कय औय कपय टकट भ परवश कयन क लरए टकट टर क साथ जकरक कय। दजम ककमा गमा टकट गोराकाय फरभ भ दजम हो जामगा।
2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP
POLYGON TOOL
Polygon tool is used to draw
a shape with more than four sides. You
can modify the polygon by selecting
Element and selecting Polygon Settings.
ऩोरीगन टर का उऩमोग चाय स अधधक ऩो क साथ आकनत फनान क लरए ककमा जाता ह। आऩ एलरभट का चमन कयक औय फहबज सदटॊगस का चमन कयक फहबज को सॊशोधधत कय सकत ह।
POLYGON FRAME
Polygon frame puts the text
inside the polygon. Select the polygon
frame tool, draw a polygon then select
the text tool and click inside the frame
to enter the text inside the frame, to
enter the text inside the polygon frame.
ऩोरीगन फरभ फहबज क अॊदय ऩाठ डारता ह। ऩोरीगन फरभ टर का चमन कय ,
फहबज खीॊच औय कपय टकट टर का चमन कय औय फरभ क अॊदय टकट भ परवश कयन क लरए फरभ क अॊदय जकरक कय, फहबज फरभ क अॊदय टकट दजम कय।
2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP
HAND TOOL
Hand tool is used to move the screen. This tool is very useful when you
are working with large documents. It helps you to easily navigate in a large page. To
move a screen, just select the hand tool
and click and drag the page to view
different parts of the page.
करीन को थानाॊतरयत कयन क लरए हड टर का उऩमोग ककमा जाता ह। जफ आऩ फड दतावजो क साथ काभ कय यह ह तो मह उऩकयण फहत उऩमोगी ह। मह आऩको एक फड ऩषठ ऩय आसानी स नववगट कयन भ भदद कयता ह। करीन को थानाॊतरयत कयन क लरए , फस हड टर का चमन कय औय ऩषठ क ववलबनन बागो को दखन क लरए ऩषठ को जकरक कय औय खीॊच।
ZOOM TOOL
Zoom tool allows you to zoom in and out of the document view. By
default the zoom tool will be in the Zoom-in mode. To zoom out of page select the
zoom tool and press control and click in
the document window with the zoom
tool.
जभ टर आऩको दतावज दशम भ जभ इन औय आउट कयन की अनभनत दता ह। डडफॉलट रऩ स जभ टर जभ-इन भोड भ होगा। ऩषठ को जभ
2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP
आउट कयन क लरए जभ टर चन औय कणरोर दफाएॊ औय जभ टर क साथ दतावज ववॊडो भ जकरक कय।
2.5.2 Style
STYLES PALETTE
The Styles Palette is used to apply
styles or to view or edit styles defined for the
publication. To apply a style, just click a paragraph
with the text tool and then click a style name in the
palette. Choose Window and select Show Styles to
display the Styles palette.
टाइर ऩरट का उऩमोग टाइर को राग कयन मा परकाशन क लरए ऩरयबावषत टाइर को दखन मा सॊऩाददत कयन क लरए ककमा जाता ह। टाइर राग कयन क लरए, फस टकट टर क साथ एक ऩयागराप ऩय जकरक कय औय कपय ऩरट भ एक टाइर नाभ ऩय जकरक कय। वव ॊडो चन औय टाइर ऩरट परदलशमत कयन क लरए टाइर चन।
2.5.3 Menus
Menu Bar:
The standard menu bar contains all the main menus for File, Layout,
Element and other utilities.
टणडडम भन फाय भ फाइर , रआउट, एलरभट औय अनम उऩमोधगताओॊ क लरए सबी भखम भन होत ह।
2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP
Ruler:
The top and left ruler bars helps you to precisely position the cursor, text,
and graphics in the page. The Current Cursor location is shown by two dotted lines in
the rulers. The view the rulers select View > Show Rulers.
शीषम औय फाएॊ ररय फाय आऩको ऩज भ कसमय , टकट औय गराकपकस को ठीक स जथनत दन भ भदद कयता ह। वतमभान कसमय थान को ररय भ दो बफ ॊदीदाय यखाओॊ दवाया ददखामा गमा ह।
Master Page Icon:
The Master Page icon
showed the position of the master
Pages. Clicking it will display the
Master Page. Master Pages contain
text, graphics, layout and settings,
which are common, thought the
publication.
भाटय ऩज आइकन न भाटय ऩज की जथनत को ददखामा। इस जकरक कयन ऩय भाटय ऩज परदलशमत होगा। भाटय ऩज भ टकट ,
गराकपकस, रआउट औय सदटॊगस शालभर ह, जो ऩय परकाशन भ सभान यहती ह।
Page Icon:
The Page icon shows the list of pages in the publication with the currently
selected pages in black. Clicking a particular page icon will display the selected page.
2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP
ऩज आइकन वतमभान भ चमननत ऩषठो क साथ परकाशन भ ऩषठो की सची को कार यॊग भ ददखाता ह। एक ववशष ऩषठ आइकन ऩय जकरक कयन स चमननत ऩषठ परदलशमत होगा।
Plasterboard:
Surrounding the page is an area of white space called the Plasterboard. It is
used to store graphics and texts as you work. Items you place on the plasterboard are
visible from any page and can be selected and moved regardless of the page you are
currently working on.
ऩषठ क चायो ओय सपद थान का एक तर ह जजस पराटयफोडम कहा जाता ह। जसा कक आऩ काभ कयत ह , इसका उऩमोग गराकपकस औय गरॊथो को सॊगरहीत कयन क लरए ककमा जाता ह। पराटयफोडम ऩय आऩक दवाया रगाए गए आइटभ ककसी बी ऩषठ स ददखाई दत ह औय आऩक दवाया वतमभान भ काभ कय यह ऩषठ की ऩयवाह ककए बफना चना औय थानाॊतरयत ककमा जा सकता ह।
FILE MENU
New: New command is used to create a new publication. This command
gives rise to a dialog box where you define the various options before opening a new
page of the publication.
नय: नमा परकाशन फनान क लरए नम कभाॊड का उऩमोग ककमा जाता ह। मह कभाॊड एक सॊवाद फॉकस को जनभ दता ह जहाॊ आऩ परकाशन क नए ऩषठ को खोरन स ऩहर ववलबनन ववकलऩो को ऩरयबावषत कयत ह।
Open: Open command allow you to open an existing PageMaker file.
ओपन: ओऩन कभाॊड आऩ को एक भौजदा ऩजभकय फाइर खोरन क लरए
2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP
अनभनत दत ह।
Save: Save command saves the current publication. To save all the open
files, press the shift key while choosing the Save option.
सव: सव कभाॊड वतमभान परकाशन को सहजता ह। सबी खरी हई पाइरो को सहजन क लरए, सहज ववकलऩ को चनत सभम लशफट कॊ जी दफाएॊ।
Revert: Revert command rolls back all the changes made since the last
save. It is the same as closing the publishing without saving and opening it again.
ररवरट: रयवटम कभाॊड अॊनतभ सव क फाद स ककए गए सबी ऩरयवतमनो को वाऩस रती ह। मह परकाशन को बफना सहज फॊद कयन औय इस कपय स खोरन क सभान ह।
Place: Place command is used to place text and
graphics into the publication.
पऱस: टकट औय गराकपकस को ऩजबरश कयन क लरए परस कभाॊड का इतभार ककमा जाता ह।
Acquire: The Acquire command is used to scan
an image into your publication.
एकवायर: एकवामय कभाॊड का उऩमोग आऩक परकाशन भ एक छवव को कन कयन क लरए ककमा जाता ह।
Export: Export command lets you export you publications into the format you
select.
ननमामत: ननमामत कभाॊड आऩको आऩक दवाया चन गए परारऩ भ परकाशनो को ननमामत कयन दता ह।
2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP
EDIT MENU
Paste Multiple: Paste Multiple lets you paste multiple copies of text or
graphics.
पसर मलरीपऱ: ऩट भलटीऩर आऩको टकट मा गराकपकस की कई कॉऩी ऩट कयन दता ह।
Paste Special: Paste Special is used to specify the format to use when you
paste an object into your publication.
पसर सपशऱ : ऩट ऩशर का उऩमोग उस परारऩ को 'ननददमषट' कयन क लरए ककमा जाता ह जफ आऩ ककसी वत को अऩन परकाशन भ ऩट कयत ह।
Insert Object: Insert Object is used to specify the format
to be used to insert an OLE embedded object within a PageMaker
publication.
इनसरट ऑबजकर : ऩजभकय परकाशन क बीतय एक OLE एमफडड ऑबजकट सजमभलरत कयन क लरए उऩमोग ककए जान वार परारऩ को ननददमषट कयन क लरए इनसटम ऑबजकट का उऩमोग ककमा जाता ह।
Edit Story: Edit Story is used to toggle between the word processing
mode and the layout mode.
एडिर सरोरी : वडम परोसलसॊग भोड औय रआउट भोड क फीच टॉगर कयन क लरए एडडट टोयी का इतभार ककमा जाता ह।
2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP
LAYOUT MENU
Sort Pages: When you select Sort Page command, a dialog box appears
with all the pages of the publication. You can rearrange the pages in the publication
graphically.
सॉरट पज: जफ आऩ सॉटम ऩज कभाॊड का चमन कयत ह , तो परकाशन क सबी ऩषठो क साथ एक सॊवाद फॉकस ददखाई दता ह। आऩ परकाशन भ ऩषठो को यखाॊकन दवाया ऩनवममवजथत कय सकत ह।
Column Guides: Column Guides lets you divide the pages of the
publication into different column of equal size.
कॉऱम गाइि: कॉरभ गाइड आऩको परकाशन क ऩषठो को सभान आकाय क अरग-अरग कॉरभ भ ववबाजजत कयन दता ह।
Auto Flow: Auto Flow is used to flow the text onto
the pages of the publication on its own from a loaded text icon.
It flows the text into pages from columns to columns and also
adds pages on its own depending on the availability of text.
ऑरो फऱो: ऑटो फरो का उऩमोग रोड ककए गए टकट आइकन स अऩन आऩ परकाशन क ऩषठो ऩय टकट को परवादहत कयन क लरए ककमा जाता ह। मह टकट को ऩषठो भ तॊबो स तॊबो तक क परवादहत कयता ह औय टकट की उऩरबधता क आधाय ऩय अऩन आऩ ऩषठ जोडता ह।
TYPE MENU
Define Styles: This option will present you a dialog box with the list of
styles used in the publication. You can add, modify and delete styles from this dialog
2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP
box.
डिफाइन सराइऱ: मह ववकलऩ आऩको परकाशन भ परमकत टाइर की सची क साथ एक सॊवाद फॉकस परतत कयगा। आऩ इस सॊवाद फॉकस स टाइर को जोड , सॊशोधधत औय हटा सकत ह। ELEMENT MENU
Frame: Frame has options for frame alignment, position and margins.
फरम: फरभ भ फरभ सॊयखण, जथनत औय भाजजमन क लरए ववकलऩ ह।
Align Objects: Align Objects lets you align multiple objects relative to
each other.
अऱाइन ऑबजकस: अराइन ऑबजकस आऩको एक-दसय क साऩ कई ऑबजकस सॊयखखत कयन दता ह।
Link Options: Link Options is used to define
whether the linked text or graphic is to be updated along
with the publication in use and also its frequency.
लऱिक ऑपशनस: लरॊक ऑपशनस का उऩमोग मह ऩरयबावषत कयन क लरए ककमा जाता ह कक लरॊक ककए गए टकट मा गराकपकस को उऩमोग भ परकाशन क साथ-साथ अऩडट ककमा जाना ह औय इसकी आवजतत बी।
UTILTIES MENU
Plug-ins: Plug-ins has a list of sub
commands, which lists out the various plug- ins,
which have been included with PageMaker as
additions.
2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP
पऱग-इन: परग-इन भ उऩ-कभाॊडस की एक सची होती ह , जो ववलबनन परग-इन को सचीफदध कयती ह , जजनह अरग स ऩजभकय क साथ शालभर ककमा गमा ह।
VIEW MENU
Display Master Items: Display Master Items
toggle the display of items from the master pages to be
reflected in the current page of the publication.
डिसपऱ मासरर आइरम : डडपर भाटय आइटभ ,
परकाशन क वतमभान ऩषठ भ ददखाए जान वार भाटय ऩषठो स आइटभ क परदशमन को टॉगर कय।
Display Non-Printing Items: Display Non-Printing items toggle the
display of non-printing items.
WINDOW MENU
Show Tools: Hide/Show tools toggles the display of PageMaker toolbar.
शो रऱ: ऩजभकय टरफाय क डडपर को नछऩाएॉ / ददखाएॉ टर। Show Control Palette: Show/Hide Control Panel toggles the display of
control panel on the screen.
शो कणटरोऱ पऱर : करीन ऩय ननमॊतरण क का परदशमन „शो / हाईड कणरोर ऩनर भ‟ टॉगर कयता ह।
Show Colors: Show/Hide Colors Toggles the
display of the Color Palette on the screen.
2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP
शो कऱर : करीन ऩय करय ऩरट क डडपर को „शो/हाईड करय भ ‟ टॉगर कयता ह।
Show Style: Show/Hide Styles toggles the display of the Styles Palette on the
screen.
शो सराइऱ: करीन ऩय टाइलस ऩरट क डडपर को „शो / हाईड टाइर भ ‟ टॉगर कयता ह।
Show Layers: Show/Hide Layers toggles the display of the Layers Palette on
the screen.
शो ऱयसट: करीन ऩय रमसम ऩरट क डडपर को „शो / हाईड रमसम भ ‟ टॉगर कयता ह।
Show Master Pages: Show/Hide Master Pages toggle the display of the
Master Pages Palette on the screen.
शो मासरर पज : करीन ऩय भाटय ऩज ऩरट क परदशमन को „शो / हाईड भाटय ऩज भ‟ टॉगर कयता ह।
Show Hyperlinks: Show/Hide Hyperlinks toggles the display of the
Hyperlink Palette on the screen.
शो हाइपरलऱिक : करीन ऩय हाइऩयलरॊक ऩरट क परदशमन को „शो / हाईड हाइऩयलरॊक भ‟ टॉगर कयता ह।
2.5.4 Alignments
2.5.5 Grids & Guides
Margin Guides: Margins are defined in the
Document Setup dialog box, when you first create
a publication, and are applied to the Document
Master page. These are represented by pink lines
2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP
on the top and bottom and by blue lines on the left and right.
मारजटन गाइडस: भाजजमन को दतावज सटअऩ सॊवाद फॉकस भ ऩरयबावषत ककमा जाता ह , जफ आऩ ऩहरी फाय एक परकाशन फनात ह , औय दतावज भाटय ऩषठ ऩय राग होत ह। म ऊऩय औय नीच गराफी यखाओॊ दवाया औय फाई ओय दाई ओय व नीरी यखाओॊ दवाया दशामए जात ह।
Column Guides: Column guides serve as boundaries for text you place
within them. You can have as many as 20 columns per page. Column guides
control the flow of text and represented by dark blue lines.
कॉऱम गाइडस: कॉरभ गाइडस टकट क लरए सीभाओॊ क रऩ भ कामम कयती ह जजनह आऩ उनक बीतय यखत ह। आऩक ऩास परनत ऩषठ 20 स अधधक कॉरभ हो सकत ह। कॉरभ गाइड टकट क परवाह को ननमॊबतरत कयत ह औय गहय नीर यॊग की यखाओॊ दवाया दशामए जात ह।
Ruler Guides: Ruler Guides are also nonprinting guidelines which primarily
used to align. Objects in the publication and are represented on the screen by Light
blue lines.
रऱर गाइडस: ररय गाइडस बी नॉनवपरजनटॊग ददशा-ननदश ह जो भखम रऩ स सॊयखखत कयन क लरए उऩमोग ककए जात ह। परकाशन भ ऑबजकस औय करीन ऩय राइट बर राइनस दवाया दशामए गए ह
2.6 Keyboard shortcuts
Ctrl + N = New Ctrl + O = Open
Ctrl + S = Save Ctrl + W = Close
Ctrl + Shift + S = Save As Ctrl + D = Place
Ctrl + Shift + D = Link Manager Ctrl + Shift + P = Document Setup
Ctrl + P = Print Ctrl + K = General
2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP
Ctrl + Q = Quite Ctrl + A = Select All
Ctrl + C = Copy Ctrl + V = Paste
Ctrl + Z = Undo Ctrl + E = Edit story
Ctrl + Shift + > = Increase Font Size Alt + Ctrl + G = Go to
Ctrl + Shift + > = Increase Font size Ctrl + Alt + > = Standard Size
Ctrl + Shift + < = Decrease Font Size Ctrl + Shift + B = Bold
Ctrl + Shift + I = Italic Ctrl + Shift + U = Underline
Ctrl + Shift + C = Centre Align Ctrl + Shift + J = Justify
Ctrl + Shift + L = Left Align Ctrl + Shift + R = Right Align
Ctrl + Shift + / = Strikethrough Ctrl + Shift + V = Reverse
Ctrl + T = Character Specs Ctrl + U = File & Stroke
Ctrl + Shift + K = All Caps Ctrl + \ = Subscript
Ctrl + Shift + \ = Superscript Ctrl + M = Paragraph
Ctrl + I = Indents/Tabs Ctrl+3 = Define Style
Alt + Ctrl + F = Frame Option Ctrl +} = Bring To Front
Ctrl + {= Send To Back Ctrl + Shift +} = Send Backward
Ctrl + Shift + {= Bring Forward Ctrl + Shift + E = Align Object
Ctrl + Alt + E = Text Wrap Ctrl + G = Group
Ctrl + Shift + G = Ungroup Ctrl + L = Lock Position
Ctrl + 6 = Mask Ctrl + Shift + 6 = Unmask
Alt + Ctrl + L = Unlock Ctrl + F = Find
Ctrl + H = Change Ctrl + L = Spelling
Ctrl + Y = Index Entry
Ctrl + + = Zoom In Ctrl + - = Zoom Out
Ctrl + 1= Actual Size Ctrl + 2 = 200 Percent
Ctrl + 4 = 400 Percent Ctrl + 5 = 500 Percent
2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP
Ctrl + 7 = 75 percent Ctrl + 0 = Fit in Window
Ctrl + R = Show/Hide Ruler Ctrl + J = Show/hide Color
2.7 Page Layouts
How to Create a Document in Page maker
After getting acquainted with PageMaker, you can use it to publish a publication
which we also call Document. It is ready to be prepared, for this, we first open a new blank
document, then we put the text, pictures etc. according to our requirement, thus a complete
document is prepared which we get printed on a printer.
ऩजभकय स ऩरयधचत होन क फाद आऩ उसका उऩमोग कयक कोई परकाशन जजस हभ दतावज (Document) बी कहत ह। फनान क लरए तमाय ह इसक लरए सफस ऩहर हभ एक नमा खारी दतावज खोर रत ह कपय उसभ अऩनी आवशमकता क अनसाय ऩाठम , धचतर आदद साभागरी रगात जात ह इस परकाय एक ऩया दतावज तमाय हो जाता ह जजस हभ ककसी वपरटॊय ऩय छऩवा रत ह।
PAGE SIZE AND PAPER SIZE
Paper size is the actual size of the paper and Page Size is the printable area
of the page. The Page size is the area enclosed by the page margins.
'ऩऩय साइज ' ऩऩय का वातववक आकाय ह औय 'ऩज साइज ' ऩज का वपरॊट कयन मोगम तर ह। ऩज साइज ऩज भाजजमन स नघया तर ह।
CONTROL PALETTE
The control Palette displays the properties for the selected paragraph,
character or object. It is a sort of shortcut to the object, text, and paragraph properties.
Choose Window and select Show Control Palette to display the Control palette.
2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP
'ननमॊतरण ऩरट ' चमननत ऩयागराप , चरयतर मा ऑबजकट क लरए गणो को परदलशमत कयता ह। मह ऑबजकट , टकट औय ऩयागराप गणो क लरए एक परकाय का शॉटमकट ह। वव ॊडो चन औय कॊ रोर ऩरट परदलशमत कयन क लरए शो कॊ रोर ऩरट चन
Control Palette in Object Mode
The control Palette when it has an object selected displays the object
properties such as the reference point, position, size, scaling, cropping, printer
resolution, and rotating, skewing and horizontal and vertical reflection.
ननमॊतरण ऩरट जफ उसका कोई ऑबजकट चमननत होता ह , तो ऑबजकट गण जस कक सॊदबम बफ ॊद, जथनत, आकाय, कलरॊग, करॉवऩॊग, वपर ॊटय रयजॉलमशन, औय घणमन,
नतयछा औय नतज औय ऊधवामधय परनतबफॊफ परदलशमत कयता ह।
Horizontal/vertical mirror: Mirrors the currently selected object along the x
or y-axis.
हॉररजॉनरऱ/वररटकऱ लमरर: x मा y- अ क साथ वतमभान भ चमननत ऑबजकट को परनतबफॊबफत कयता ह।
Height/width: sets the height and width of the currently selected object, either
numerically in inches or in percentage of the current size.
हाइर/ववडथ: वतमभान भ चमननत वत की ऊॉ चाई औय चौडाई मा तो सॊखमातभक रऩ स इॊच भ मा वतमभान आकाय क परनतशत भ सट होती ह।
Rotate: Rotate, is used to rotate the selected object around an axis. The
center of rotation is set as the object‟s center and exact measurements can be used.
रोरर: योटट का उऩमोग ककसी अ क चायो ओय चमननत ऑबजकट को घभान
2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP
क लरए ककमा जाता ह। योटशन क क दर को ऑबजकट क क दर क रऩ भ सट ककमा गमा ह औय सटीक भाऩ का उऩमोग ककमा जा सकता ह।
XY position: sets the horizontal and vertical position of the upper-left
corner of the currently selected object.
XY पोजीशन: वतमभान भ चमननत ऑबजकट क ऊऩयी-फाएॉ कोन की नतज औय ऊधवामधय जथनत सट कयता ह।
Control Palette in Character Mode
The Character Palette is displayed when the text tool is selected. It has
options for changing text styles, size, leading, tracking, width and Deming. There is a
toggle button to shift between paragraph view and character view.
टकट टर का चमन कयन ऩय 'कयकटय ऩरट ' परदलशमत होता ह। इसभ टकट टाइर, आकाय, रीडड ॊग, रककॊ ग, चौडाई औय डलभॊग फदरन क ववकलऩ ह। ऩयागराप वम औय कयकटय वम क फीच लशफट कयन क लरए टॉगर फटन ह।
Kerning: Text Kerning adjusts the spacing between characters in text. It is
selective, so you can adjust just one or two characters, or whole sections of text,
Negative numbers move characters closer together, whereas Positive numbers space
them out.
कररिग: टकट करयॊग टकट भ वणो क फीच अॊतय को सभामोजजत कयता ह। मह
चमनातभक ह, इसलरए आऩ कवर एक मा दो वणो को सभामोजजत कय सकत ह, मा टकट क
ऩय खॊडो को, नकायातभक सॊखमाएॊ वणो को एक साथ कयीफ र जाती ह, जफकक सकायातभक
सॊखमाएॊ उनह फाहय ननकारती ह।
2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP
Leading: Text Leading adjusts the spacing between lines of text. This is
applicable on line-by-line basis. Positive and Negative number have the same effect as
they have on Kerning, except that the spacing is between the lines of text.
ऱीडि िग: टकट रीडड ॊग टकट की राइनो क फीच रयजकत को सभामोजजत कयता ह। मह राइन-फाम-राइन आधाय ऩय राग होता ह। ऩॉजजदटव औय नगदटव नॊफय का उतना ही परबाव ऩडता ह , जजतना कक करयॊग ऩय ऩडता ह , लसवाम इसक कक रयजकत टकट की यखाओॊ क फीच होती ह।
Tracking: Text Tracking adjusts how closely characters follow each
other. Very tight tracking brings text closer together, very loose spreads it out a bit.
रककि ग: टकट रककॊ ग सभामोजजत कयती ह कक वणम एक दसय क ककतन ननकट आत ह। फहत तॊग रककॊ ग टकट को एक साथ सभीऩ राती ह , फहत ढीरा इस थोडा पराता ह।
Size: Text Size adjusts point size of text.
साइज: टकट साइज, टकट क बफ ॊद आकाय को सभामोजजत कयता ह।
Position: Text Position adjusts the placement of the text on a given line.
Positive Numbers move the text into a super text position (above the line), and
Negative numbers move it into a subtext position (below the line).
पोरिशन: टकट ऩोजजशन ककसी ददए गए राइन ऩय ऩाठ क थान को सभामोजजत कयता ह। सकायातभक सॊखमाएॊ ऩाठ को एक सऩय टकट जथनत (राइन क ऊऩय) भ र जाती ह , औय नकायातभक सॊखमाएॊ इस एक सफटकट जथनत (राइन क नीच) भ र जाती ह।
Width: Text Width adjusts the character width and does not affect height.
The larger the percentage, the wider the word. Percentages over 100% make it
proportionate larger than standard sizing, fewer than 100% make it proportionate
2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP
smaller.
ववडथ: टकट ववडथ वणम चौडाई को सभामोजजत कयती ह औय ऊॊ चाई को परबाववत नहीॊ कयती ह। फडा परनतशत , वमाऩक शबद। 100% स अधधक परनतशत मह भानक आकाय स फडा आनऩानतक फनाता ह , 100% स कभ इस आनऩानतक रऩ स छोटा फनाता ह।
Control Palette in Paragraph mode
The control palette displays options for the paragraph style, alignment,
indents, spacing, grid spacing and grid alignment.
कणरोर ऩरट ऩयागराप टाइर , सॊयखण, इॊडट, रयजकत, धगरड रयजकत औय धगरड सॊयखण क ववकलऩ परदलशमत कयता ह।
COLOR PALETTE
The Color Palette is used to apply colors or view the name or kind of color
applied to the selected text or object. The buttons stroke, fill or both, can be used to
change the color of the graphic object and Object level. Tints allow you to have
variations of the same color. To apply a color to a text or object and select the color
from the color Palette. Choose Window and select Show Colors, to display the Colors
2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP
palette.
करय ऩरट का उऩमोग यॊगो को राग कयन मा चमननत टकट मा ऑबजकट ऩय राग यॊग मा नाभ को दखन क लरए ककमा जाता ह। फटन रोक , बयण मा दोनो , का उऩमोग गराकपक ऑबजकट औय ऑबजकट तय क यॊग को फदरन क लरए ककमा जा सकता ह। दटनस आऩको एक ही यॊग क फदराव कयन की अनभनत दत ह। ककसी टकट मा वत ऩय यॊग रगान क लरए औय यॊग ऩरट स यॊग का चमन कयन क लरए। ववॊडो चन औय करसम ऩरट परदलशमत कयन क लरए शो करसम का चमन कय।
2DCA3(B) DTP WITH PAGEMAKER & PHOTOSHOP