Enterasys Networks 2B0-020ES NetSight AtlasVersion 1.0

QUESTION NO: 1 Which task can be performed using Device Manager?

A. Change the community name of a nodeB. View Trap Table informationC. Change the IP address of a nodeD. Firmware Image Download

Answer: D

QUESTION NO: 2 Device Manager provides all of the following, EXCEPT

A. System level configurationB. Broadcast Suppression configurationC. Graphic representation of a deviceD. Configuration file upload/download

Answer: A

QUESTION NO: 3 What benefits are gained with SNMPv3?

A. Encrypted messagesB. Better error codesC. All of the aboveD. Fast table retrieval

Answer: C

QUESTION NO: 4 Which of the following statements about Compass is NOT true?

A. Compass performs a search on the devices or device groups selected in the left panel.B. Compass results can be exported.C. Compass is available with Atlas Console and Atlas Lite.D. Compass is a tool used to find out information about users and where they are connected.

Answer: C

QUESTION NO: 5 What is the name of the file that defines the absolute path to your NetSight Plug-In applications?

A. commonB. NetSight.propertiesC. PlugIn.detailsD. Atlas.config

Answer: B

QUESTION NO: 6 The MIB Tools Utility allows you to do all of the following, EXCEPT

A. Set object valuesB. Browse the MIB databaseC. Search for objectsD. View object definitionsE. Change IP addresses on devices

Answer: E

QUESTION NO: 7 With SNMPv3, the source is authenticated

A. Both A and CB. to make sure the user has permission to access the deviceC. to verify the message was not modified en routeD. to prevent disclosure of sensitive information while en routeE. to read or to modify subsets of the target data

Answer: B

QUESTION NO: 8 The benefit to defining groups is to enable focused management of network elements.

A. FalseB. True

Answer: B

QUESTION NO: 9 Which version uses IP address-based access lists and community strings for authentication?

A. SNMPv2B. SNMPv1C. SNMPv3D. All of the aboveE. A and B

Answer: E

QUESTION NO: 10 What are the three tabs in the left panel of Inventory Manager?

A. Properties, VLAN, CompassB. Details View, Archives, ChassisC. Devices, Traps, ArchivesD. Network Elements, Firmware Management, Configuration Management

Answer: D

QUESTION NO: 11 Which of the following statements are true about FlexViews?

A. You can create custom tabs to display desired MIB information.B. A and C onlyC. The FlexView Wizard is not available with Atlas Lite.D. You can use the FlexView editor to define as many FlexViews as you want.E. All of the above

Answer: E

QUESTION NO: 12 The Atlas Console process that writes the definitions in the VLAN model to selected devices or ports is called

A. RequestingB. EnforcingC. PushingD. Verifying

Answer: B

QUESTION NO: 13 ACL rules are considered redundant if

A. They have the same descriptionB. A and BC. They are defined by parameters that would match the same packet trafficD. They are the same rule TypeE. All of the above

Answer: B

QUESTION NO: 14 Which of the following statements describes the benefit to the network administrator of archiving device configurations?

A. A and CB. To reconfigure a device from a BOOTP stateC. All of the aboveD. To reconfigure device access properties after a device resetE. To isolate the source of network problems due to changes in configuration files

Answer: A

QUESTION NO: 15 What item is NOT available to enable/disable in the Bridge Extension Configuration window?

A. Traffic classesB. GVRPC. GMRPD. Dynamic egress

Answer: D

QUESTION NO: 16 Creating a hierarchy of user-defined location groups to manage devices based on their physical location is an example of how groups might be used.

A. FalseB. True

Answer: B

QUESTION NO: 17 What is the purpose of the Packet Evaluation Tool?

A. To test whether a defined packet will be denied or allowed based on selected ACLB. To verify that the packet will hit selected ACLs based on other router configurationsC. All of the aboveD. To evaluate packet syntax

Answer: A

QUESTION NO: 18 Compass can be used to search devices, device groups and port groups.

A. TrueB. False

Answer: B

QUESTION NO: 19 Which of the following actions can Atlas Console initiate when certain alarms, events or traps occur on the network?

A. Write the event log to an HTML file for web-based viewingB. A and C onlyC. Send an e-mail notification or run a programD. Run a program or shut down Atlas ConsoleE. Send an e-mail notification and then shut down Atlas Console

Answer: C

QUESTION NO: 20 In the context of Policy Manager, a Role is a

A. Feature used to assign access control and/or class of service to network traffic based on its OSI layerB. Feature used to combine classification rules to implement permission and denial to network resourcesC. Feature used to enforce the default role on a portD. Feature set that is assigned after authentication exchange and the port is available

Answer: D

QUESTION NO: 21 Console can poll and display up to 100 FlexViews at a time.

A. TrueB. False

Answer: B

QUESTION NO: 22 How are ACLs added to the Router Services Manager database?

A. Using File > Import > ACLs From File optionB. A and C onlyC. Using the Import ACLs from Device optionD. All of the aboveE. Using the Verify option to retrieve ACLs from devices

Answer: D

QUESTION NO: 23 What is the purpose of the SNMP trapd Server?

A. To send traps to devicesB. To create the trap log fileC. To provide device recovery services to remote devicesD. To use the trap log file as a trap repositoryE. Both A and C

Answer: E

QUESTION NO: 24 What service must be running to save a configuration?

A. TFTPB. All of the aboveC. BOOTPD. SNMP trapd

Answer: A

QUESTION NO: 25 Which version provides user role-based authorization through an access control subsystem?

A. SNMPv3B. SNMPv1C. SNMPv2D. All of the aboveE. A and B

Answer: A

QUESTION NO: 26 On Cabletron and Enterasys devices, each interface has two default RMON history tables, as follows:

A. One table contains snapshots taken every second, and the other contains snapshots taken every 30 seconds.B. One table contains snapshots taken every 30 minutes, and the other contains snapshots taken every 30 seconds.C. One table contains snapshots taken every day, and the other contains snapshots taken every 30 days.D. One table contains snapshots taken every minute, and the other contains snapshots taken every second.

Answer: B

QUESTION NO: 27 What service must be running to allow a successful firmware download operation?

A. TFTPB. All of the aboveC. BOOTPD. SNMP trapd

Answer: A

QUESTION NO: 28 Which service must be stopped to modify the bootptab file?

A. BOOTPB. All of the aboveC. SNMP trapdD. TFTP

Answer: A

QUESTION NO: 29 How is it possible to protect a map from accidental editing?

A. Click the Edit button to hide the Placement Panel.B. Edit the map properties to remove write privileges.C. None of the aboveD. It is not possible to protect a map from accidental editing.

Answer: A

QUESTION NO: 30 A MIB not supported on all devices should be assigned to which SNMP Request Group, when defining a FlexView?

A. Group 3B. All of the aboveC. Group 2D. Group 4E. Group 1F. B or C only

Answer: F

QUESTION NO: 31 Which Compass search type is used to locate authenticated users in a User Personalized Network?

A. IP SubnetB. IP AddressC. User NameD. MAC Address

Answer: C

QUESTION NO: 32 In what directory must the bootptab file be saved?

A. C:Program Files\Enterasys NetworksB. \NetSight Atlas Console\bootpC. \NetSight Atlas Shared\binD. There is no particular directory where the bootptab file must be saved

Answer: C

QUESTION NO: 33 Which of the following tools is used to write new MIB object values?

A. FlexView Request Group.B. FlexView Event NotificationC. FlexView PropertiesD. FlexView Table Editor

Answer: D

QUESTION NO: 34 Which of the following device communication methods is used by MIB Tools?

A. SNMPv3 ProfileB. SNMPv1C. All of the aboveD. Max Access/Super UserE. A and C onlyF. SNMPv3 Credential

Answer: C

QUESTION NO: 35 What level of access is required to create new users in Router Services Manager, when Authorization is enabled?

A. AdministratorB. Read WriteC. Any user can create new usersD. Read Only

Answer: A

QUESTION NO: 36 The Packet Evaluation Tool can be used as a troubleshooting aid to exclude an ACL as the source of routing issues.

A. TrueB. False

Answer: A

QUESTION NO: 37 Which version provides user-level authentication and message encryption via a security subsystem?

A. SNMPv2B. SNMPv1C. All of the aboveD. A and BE. SNMPv3

Answer: E

QUESTION NO: 38 In which Inventory Manager Option do you configure TFTP server parameters?

A. File Transfer MethodB. UpdatesC. DatabaseD. Services

Answer: A

QUESTION NO: 39 How are devices added to the Router Services Manager database?

A. Using File > Import Devices From FileB. Using the Create Device windowC. A and B onlyD. All of the aboveE. Using the Discover Tool

Answer: C

QUESTION NO: 40 How can you import third-party MIB data into the MIB Tools Utility?

A. Add the MIB file to /Resources/mibsB. Use the Details tabC. Use the MIB EditorD. You cannot import third-party MIB data into the MIB Tools Utility

Answer: A

QUESTION NO: 41 Compass search results list everywhere a particular user has been heard on the network in just the last 60 minutes.

A. FalseB. True

Answer: A

QUESTION NO: 42 Which of the following configuration files can you view while comparing archives in Inventory Manager?

A. All archived configuration filesB. A and CC. Only files in which a difference in configurations is foundD. All archived database files

Answer: C

QUESTION NO: 43 With SNMPv3, the source is authorized

A. to prevent disclosure of sensitive information while en routeB. to make sure the user has permission to access the deviceC. Both B and DD. to verify the message was not modified en routeE. to read or to modify subsets of the target data

Answer: E

QUESTION NO: 44 To add a BOOTP tab to the Alarms and Events panel you must first configure BOOTP to create a log file.

A. FalseB. True

Answer: B

QUESTION NO: 45 The information displayed in the Device Manager is obtained from the

A. Atlas Policy Manager databaseB. MIB database of the deviceC. Atlas Router Services Manager databaseD. Atlas Console databaseE. Atlas Inventory Manager database

Answer: B

QUESTION NO: 46 Which of the following definition(s) best describes the difference between managers and agents in SNMPv1 and SNMPv3?

A. A and BB. In SNMPv1, the manager and agent were distinctly different and performed discrete functions: the manager ran applications; theagent provided functionality. Managers resided on workstations; agents on remote devices.C. In SNMPv3, a distributed interacting collection of SNMP entities can reside on both management workstations and remotedevices. Because each entity implements a portion of SNMP capability, an entity can act as an agent, a manager, or acombination of the two.D. B and CE. In SNMPv1, the manager and agent were distinctly different but performed overlapping functions. Managers resided onworkstations; agents on remote devices.F. All of the above

Answer: D

QUESTION NO: 47 The Firmware Upgrade Wizard allows you to enter a reset delay time for devices that support timed reset. How can you reset devices that do not support timed reset?

A. You cannot reset devices that do not support timed reset.B. After closing the Firmware Upgrade Wizard, you open the Manual Device Reset Wizard.C. After selecting the devices in the table, click Start to initiate manual resets.D. It is necessary to walk to the device to initiate a reset.

Answer: C

QUESTION NO: 48 What step should be taken after editing or deleting a redundant rule?

A. Click the Advance Reference Index button to start a new searchB. No action is necessaryC. Click the Re-evaluate Reference Index button to seek additional redundancies to the Reference ruleD. Click the Close button to exit the Find Redundant Rules window

Answer: C

QUESTION NO: 49 The relationship among remote devices in each map is automatically generated by Console when you click the Retrieve button.

A. FalseB. True

Answer: A

QUESTION NO: 50 A FlexView table can be exported to which of the following formats?

A. HTMLB. Pie chartC. gifD. Bar graph

Answer: A

QUESTION NO: 51 Inventory Manager Firmware Upgrade Wizard executes download operations in parallel on the number of devices specified in the "Groups of" field. What value do you enter to have the download operations performed serially?

A. serialB. 0C. 1D. 6

Answer: C

QUESTION NO: 52 How many default Alarm & Events tables are available with the initial installation of Atlas Console?

A. TwoB. FourC. OneD. Three

Answer: A

QUESTION NO: 53 In the context of Policy Manager, a Service is a

A. Feature used to assign access control and/or class of service to network traffic based on its OSI layerB. Feature used to enforce the default role on a portC. Feature used to combine classification rules to implement permission and denial to network resourcesD. Feature set that is assigned after authentication exchange and the port is available

Answer: C

QUESTION NO: 54 What were the two new PDUs implemented in SNMPv2?

A. GetNext and GetBulkB. InformRequest and ResponseRequestC. GetBulk and InformRequestD. GetBulk and SetNext

Answer: C

QUESTION NO: 55 Which of the following symbols indicates that VLAN settings will be written to the device when enforced?

A. A red exclamation pointB. A green right-pointing arrowC. A green exclamation pointD. A red not-equal sign

Answer: C

QUESTION NO: 56 VLAN configurations can be deployed in Atlas Lite via the Device Manager, providing the device supports it.

A. FalseB. True

Answer: B

QUESTION NO: 57 Which RMON groups are accessible from the Device Manager?

A. Statistics and HistoryB. Filter and CaptureC. Alarm and EventD. Host and Matrix

Answer: A

QUESTION NO: 58 With SNMPv3, message integrity is checked

A. to prevent disclosure of sensitive information while en routeB. Both A and BC. to make sure the user has permission to access the deviceD. to read or to modify subsets of the target dataE. to verify the message was not modified en route

Answer: E

QUESTION NO: 59 Console displays VLAN device and model settings in a side-by-side manner for which of the following VLAN tab views??

A. Advanced Port ViewB. Basic Port ViewC. B and C onlyD. Device ViewE. All of the above

Answer: C

QUESTION NO: 60 Within the context of NetSight Atlas Policy Manager, which of the following statements describe a Role?

A. A defined function within the business organizationB. A VLAN membershipC. A classification ruleD. A traffic description and associated action

Answer: A

QUESTION NO: 61 Router Services Manager provides functionality to copy an ACL from and X-Pedition router and paste and translate it to the proper format to be used on an E1 Workgroup switch routing interface.

A. TrueB. False

Answer: A

QUESTION NO: 62 Which of the following statements best describes why you would want to enable the Remote Data Services option?

A. To provide remote workstations with access to the Console database on the local workstation.B. To store the local Console database on a remote workstation.C. To import the local device list into an Atlas plug-in application like Policy Manager, or Inventory Manager.D. All of the aboveE. Both A and B

Answer: E

QUESTION NO: 63 What are the three predefined groups in Inventory Manager Network Elements?

A. Matrix, SmartSwitch and X-PeditionB. Chassis, Matrix and X-PeditionC. Chassis, Device Type and IPD. Matrix, X-Pedition and IP

Answer: C

QUESTION NO: 64 The Goto symbol is used as a navigational tool to jump to another map.

A. FalseB. True

Answer: B

QUESTION NO: 65 With SNMPv3, the message is encrypted

A. to verify the message was not modified en routeB. to read or to modify subsets of the target dataC. to make sure the user has permission to access the deviceD. Both A and CE. to prevent disclosure of sensitive information while en route

Answer: E

QUESTION NO: 66 Which of the following network components is represented by a network object?

A. HostsB. All of the aboveC. Range of IP addressesD. SubnetsE. A, B and DF. Dynamic objects

Answer: B

QUESTION NO: 67 How can network masks be displayed in CIDR notation in Router Services Manager?

A. By selecting Dot Delimited in the Display option of Tools > OptionsB. It is not possible to have network masks displayed in CIDR notationC. By selecting CIDR in the Network Mask option of Tools > OptionsD. By selecting CIDR in the device properties window

Answer: C

QUESTION NO: 68 Which of the following best describes a firewall policy?

A. B and CB. Controls ICMP trafficC. Controls UDP trafficD. Controls TCP trafficE. All of the above

Answer: A

QUESTION NO: 69 What directory contains the NetSight Atlas background services on Unix?

A. /usr/local/Enterasys Networks/NetSight Atlas Console/binB. /usr/sbinC. /usr/binD. /etc/rc2.d

Answer: D

QUESTION NO: 70 FlexViews can be viewed as a

A. TableB. Pie chartC. All of the aboveD. A and C onlyE. Bar graph

Answer: C