2:1AIR DRYING

CLEAR COAT HSA

NO OVEN

ADVANTAGES• Very Fast• More Antistatic Control (Dust repellent)• Easy Levelling• Not yellowing (newest UV protection)• Does not magnify metallic (will not distort the metallic)• Easy to polish

• Ideal for working up to 3, 4 panels• With the addition of CAR FULL ADDITIVE

is possible to paint the entire car

• 60’ @ 20°C• 10’ @ 60°C• 10’ with infrared

CURING

USE

2:1

HIGH PRODUCTIVITYLOW COST

PRODOTTI CHIMICI PER LA CARROZZERIA, L'INDUSTRIA E LA NAUTICAALLCHEM S.r.l. Via Azzano S. Paolo, 32/C - 24050 GRASSOBBIO (BG) ITALY - Tel. +39-035 525 616 - Fax +39-035 526 199 - www.allchem.it - info@

Data Sheet Pag. 141

SCHEDA TECNICA - TECHNICAL INFORMATION - TECHNISCHE INFORMATIONEN - INFORMATIONS TECHNIQUES

VOLUME% PESO (g)Volume Weight

292 ClearTrasparente 100 100

293 HardenerCatalizzatore 50 25

898 AD Thinner Diluente 0 0

292.1000.12 Prodotto293.0500.12 Catalizzatore/Hardener

Resina SpecificaModified specific resin

992 ± 50 g / l

Ratio = 2:1 Asta graduata

2-2,5 h

18±2" Coppa Ford Ø 4 a 20°C

1,2 - 1,4 mm.

-

3 - 3,5

1 L 60 cartoni / carton boxes

1 L clear 500ml Hardener

12 pezzi/pieces/boîtes 12 Cat. / hard./durcis.

60' Air10' Spray Booth

12 mesi in luogo fresco e asciutto 12 months in a cool and dry place12 mons dans un endroit frais et sec

2-4 h

15‘-20‘

2-4 h

Pezzi CartonePieces/carton boxNo. par cartonEnvases por cajaCartoni PalletCarton box / Pallet

Eur 80 x 120 cm

NATURA PRODOTTONature of productNature du produitNaturaleza de producto

Codice prodottoCode - Codigo

ColoreColour • Coleur • Color

Peso SpecificoSpecific GravityPoid specificPeso specifigoRAPPORTO MISCELAMixing ratioProportion de melange

PRODOTTOProduct ProduitProductoCATALIZZATOREHardenerDurcisseurEndurecedorDILUENTEThinnerDiluantDisolvente

POT-LIFEPot-life (20°C)

VISCOSITA' APPLICAZIONESpraying viscosityViscosité d'application

PISTOLA A CADUTAGravity feed spray gunPistolet à gravité

PISTOLA AD ASPIRAZIONESuction feed spray gunPistolet à godet suspendu

PRESSIONE ARIA (Bar)Air pressure (Bar)Pression

PRONTO AL MONTAGGIODry to assemble

CONSERVABILITA'AgeingStockage

TEMPO ESSICAZIONEThrough drying • Evaporation

(68°F)(20°C) Aria (140°F)(60°C) Forno

SECCO AL TATTO(20°C)Tack free (20°C)

FUORI POLVERE (20°C)Dust free (20°C)

APPASSIMENTOFlash timeEvaporation

A B C

Roto orbitale seccoFlat bed sander dryPonceuse vibrante à sec

Cart. manuale bagnatoSanding by hand wetPonçage à la main eau

g / L

ATM

55 microns

2 mani piene 2 full coat

NUMERO MANINumber of coatsPasses

Contenuto solidoSolid content

V.O.C. PRODOTTOPronto all'usoProduct V.O.C. Ready to use

A

B

C

VOC (2004/42/CE IIB)------------------------------------- (e-840 g/L max) cont. 578 g/L

3‘-6‘ minutesTra una mano e l'altraBetween the first and second coat

Data, information and suggestions correspond to our experience in the field. However, we assume no responsibility for results obtained, as conditions and usage are beyond our control.

We do not recommend drying tunnel with infrared. Respect the drying times between each hand. Polishing after 2 hours of air drying at 20°C or after 30’ with oven drying after 10’ at 60°C.

TrasparenteTransparent • Transparent • Transparente

Roto orbitale bagnatoFlat bed sander wetPonceuse vibrante à l'eau

ADDITIVIAdditives

SPESSORE FILM SECCODry film thickness

V.O.C. PRODOTTO CHProduct V.O.C. CH

292.1000.12293.0250.12898.0250.12

VOC

I dati contenuti nella presente scheda si basano sulle nostre conoscenze ed esperienze. Questi non sono impegnativi poiché a causa della diversità dei materiali presenti sul mercato ed al fatto che le condizioni di applicazione sfuggono al nostro controllo, si deve verificare con prove adeguate la idoneità del prodotto per lo specifico uso preso in considerazione. Per ulteriori informazioni contattare il nostro servizio tecnico.

Compatible with all standard finishes currently available, suitably degreased and dulled.All 2K bases, metallic, mica, pearl and pastel formulated for the automotive industry. Suitable for painting of 3-4 panels for small jobs (spot repairs). Not recommended for very large surfaces.Before applying AIR DRYING Clear Coat, dulling the old finish that must be covered, and degreased with a water antisilicone (DEGREASER). As with all paint systems, the best results are obtained if the lens is brought to the temperature of the spray before the application (20-25 ° C). It is also recommended to bring the surface to at least 15 °C before application. The low temperatures make more difficult for the absorption of the fumes and distension.It is important to carefully follow the application procedure to avoid too thick resulting in delays in the drying phase.It is especially important to make sure that the base coat is completely dry or does not contain traces of moisture, water or solvent before applying clear.

292 AIR DRYING 2:1 CLEAR COAT