Quartet Valves System For Engines

• Innovative mechanical inventions have been always making their way. One among them is quartet valves system for gasoline and diesel engines.

• Lets first discuss the difference between the major difference between diesel and gasoline engines…..The main difference it seems is the way these explosions happen. In a gasoline engine fuel is first mixed with air, compressed by pistons and ignited by sparks from spark plugs. In a diesel engine on the other hand the air is first compressed and then the fuel is injected.

• But theoretically both the engines are very similar. Both are internal combustion engines designed to transform the chemical energy in fuel into mechanical energy. This mechanical energy moves pistons up and down inside cylinders.

• Both the engine types have quartet valves system. Quartet valves system is used to make the head of the Cylinder head movable and there is wizard Cylinder head which allows the exhaust gas a capability of escaping with four holes of the entire valves located on top of the Cylinder head and for the inlet of the air it’s replaced with entire moving of the roof of the Cylinder head as one big valve of enhanced inlet of the air.

http://crbtech.in/Student-Reviews/Mechanical-Reviews

• This valve when it open it has the four holes of the source of release valves with the outline of the big valve which constitute the top of the cylinder.

• This system enhances the engine’s intake of more air by increasing the entry of inlet so the old Cylinder head have an handicap, it’s about the non capability of making more then two hole for the inlet in the top of the Cylinder head, because of the necessity of the holes of the exhaust release, then the engineers made various ways in order to perform the air circulation of the engine.

• With this innovation, one can create more then the two classical valves of air admission… It’s to rotate the head of the Cylinder head , and here we have the wizard Cylinder head which helps the exhaust gas the high chances of escaping with four holes of the valves situated on top of the Cylinder head, and for the inlet of the air it’s replaced with entire moving of the roof of the Cylinder head as one big valve of admission of the air, this valve when it open it have the four holes of the places of release valves with the outline of the entire big valve which constitute the top of the cylinder.

http://crbtech.in/Student-Reviews/Mechanical-Reviews

THANK YOU