25133_cr0969r1_(rel-8)_r4-090959
TRANSCRIPT
-
7/27/2019 25133_CR0969R1_(Rel-8)_R4-090959
1/5
3GPP TSG-RAN WG4 Meeting #50 R4-090959Athens, Greece, Feb. 9-13, 2009
CR-Form-v9.6
CHANGE REQUEST
25.133 CR 969 rev 1 Current version: 8.5.0
ForHELPon using this form look at the pop-up text over the symbols. Comprehensive instructions onhow to use this form can be found athttp://www.3gpp.org/specs/CR.htm.
Proposed change affects:
UICC apps ME X Radio Access Network Core Network
Title: Test case of UTRA FDD-E-UTRA FDD cell reselection when E-UTRA FDD is ofhigher priority
Source to WG: Huawei, NTT DOCOMO
Source to TSG: R4
Work item code: LTE-RF Date: 2/2/2009
Category: F Release: Rel-8Use one of the following categories:
F (correction)A (corresponds to a correction in an earlier release)B (addition of feature),C (functional modification of feature)D (editorial modification)
Detailed explanations of the above categories canbe found in 3GPPTR 21.900.
Use one of the following releases:R99 (Release 1999)Rel-4 (Release 4)Rel-5 (Release 5)Rel-6 (Release 6)Rel-7 (Release 7)Rel-8 (Release 8)Rel-9 (Release 9)Rel-10 (Release 10)
Reason for change: To specify the test case for UTRA FDD-E-UTRA FDD cell reselection when E-UTRA FDD is of higher priority.
Summary of change: The test case for UTRA FDD-E-UTRA FDD cell reselection when E-UTRA FDDis of higher priority is added.
Consequences if not approved:
There will be no test case for UTRA FDD-E-UTRA FDD cell reselection when E-UTRA FDD is of higher priority.
Clauses affected: New clause A.4.5 is added.
Y N
Other specs X Other core specifications
affected: X Test specifications TS 34.121-1
X O&M Specifications
Other comments:
http://www.3gpp.org/3G_Specs/CRs.htmhttp://www.3gpp.org/3G_Specs/CRs.htmhttp://www.3gpp.org/specs/CR.htmhttp://www.3gpp.org/specs/CR.htmhttp://www.3gpp.org/ftp/Specs/html-info/21900.htmhttp://www.3gpp.org/ftp/Specs/html-info/21900.htmhttp://www.3gpp.org/ftp/Specs/html-info/21900.htmhttp://www.3gpp.org/3G_Specs/CRs.htmhttp://www.3gpp.org/specs/CR.htmhttp://www.3gpp.org/ftp/Specs/html-info/21900.htm -
7/27/2019 25133_CR0969R1_(Rel-8)_R4-090959
2/5
A.4.5 UTRAN to E-UTRA Cell Reselection
A.4.5.1 E-UTRA FDD is of higher priority
A.4.5.1.1 Test Purpose and Environment
This test is to verify the requirement for the UTRA FDD to E-UTRA FDD inter-RAT cell reselection delay reported
in section 4.2.
The test scenario comprises two different cells, with cell 1 being the UTRA serving cell and cell 2 being the E-
UTRA cell to be re-selected to. Test parameters are given in Tables A.4.14, A.4.15, A.4.16. The test consists of
three successive time periods, with time duration of T1, T2, and T3, respectively. Both UTRA cell 1 and E-UTRA
cell 2 are already identified by the UE prior to the start of the test. Cell 2 is of higher priority than cell 1.
Cell 1 and cell 2 shall belong to different tracking areas. Furthermore, UE has not registered with network for the
tracking area containing cell 2.
3GPP
-
7/27/2019 25133_CR0969R1_(Rel-8)_R4-090959
3/5
Table A.4.14: General test parameters for UTRAN to E-UTRA Cell Reselection
Parameter Unit Value Comment
Initial condition Active cell Cell1
Neighbour cell Cell2Final condition Active cell Cell2 UE shall
perform
reselection tocell 2 during T3
DRX cycle length s 1.28
HCS Not usedE-UTRA PRACH configuration 4 As specified in
table 5.7.1-2 inTS 36.211
E-UTRA access barring information Not sent No additionaldelays inrandom accessprocedure
T1 s 25 T1 needs to bedefined so thatcell re-selection
reaction time istaken intoaccount.
T2 s 5 During T2, cell2 shall bepowered off,and during theoff time itsphysical cellidentity shall bechanged. Theintention is toensure that cell2 has not been
detected by theUE prior to thestart of periodT3.
T3 s 85 T3 needs to bedefined so thatcell re-selectionreaction time istaken intoaccount.
3GPP
-
7/27/2019 25133_CR0969R1_(Rel-8)_R4-090959
4/5
Table A.4.15: Cell specific test parameters for UTRAN to E-UTRA cell reselection (cell 1)
Parameter Unit Cell 1 (UTRA)
T1 T2 T3
UTRA RF Channel Number Channel 1CPICH_Ec/Ior dB -10
PCCPCH_Ec/Ior dB -12
SCH_Ec/Ior dB -12PICH_Ec/Ior dB -15OCNS_Ec/Ior dB -0.941
ocor II dB 11 11 11
ocI
dBm/3,84MHz
-70
CPICH_Ec/Io dB -10.33 -10.33 -10.33
CPICH_RSCP dBm -69 -69 -69Qqualmin dB -20
Qrxlevmin dBm -115
UE_TXPWR_MAX_RACH dBm 21
Treselection s 0SsearchE-UTRA dB Not sent
Threshx, high (Note 1) dB 48Propagation Condition AWGN
Note 1: This refers to the value of Threshx, high which is included in UTRAsystem information, and is a threshold for the E-UTRA target cell.
Table A.4.16: Cell specific test parameters for UTRAN to E-UTRA cell reselection (cell 2)
Parameter Unit Cell 2
T1 T2 T3
E-UTRA RF Channelnumber
2
BWchannel MHz 10
OCNG Patterns defined inTS 36.133 A.3.2.1.2 (OP.2FDD) [24]
OP.2 FDD
PBCH_RA dB
0
PBCH_RB dB
PSS_RA dB
SSS_RA dB
PCFICH_RB dB
PHICH_RA dB
PHICH_RB dB
PDCCH_RA dB
PDCCH_RB dB
PDSCH_RA dB
PDSCH_RB dB
OCNG_RANote 1
dBOCNG_RBNote 1 dB
Qrxlevmin dBm -140
ocN dBm/15 kHz -98
RSRP dBm/15 KHz -100 -infinity -89
otsI dB -2 -infinity 9
TreselectionEUTRAN s 0
Snonintrasearch dB Not sent
Threshserving, low dB 44
Threshx, low(Note 2) dB 43Propagation Condition AWGN
Note 1: OCNG shall be used such that cell 2 is fully allocated and a constant total
transmitted power spectral density is achieved for all OFDM symbols.Note 2: This refers to the value of Threshx, low which is included in E-UTRA system
information, and is a threshold for the UTRA target cell.
3GPP
-
7/27/2019 25133_CR0969R1_(Rel-8)_R4-090959
5/5
A.4.5.1.2 Test Requirements
The cell re-selection delay is defined as the time from the beginning of time period T 3, to the moment when the UE
camps on Cell 2, and starts to send preambles on the PRACH for sending the RRC CONNECTION REQUEST
message to perform a Tracking Area Update procedure on Cell 2.
The cell re-selection delay shall be less than 81 s.
The rate of correct cell reselections observed during repeated tests shall be at least 90%.
NOTE: The cell re-selection delay can be expressed as: Thigher_priority_search + TevaluateEUTRA + TSI, where:
Thigher_priority_search See section 4.2.2
TevaluateEUTRA See Table 4.2 in section 4.2.2.5a
TSI Maximum repetition period of relevant system info blocks that needs to be received by the UE
to camp on a cell; 1280 ms is assumed in this test case.
This gives a total of 80.48 s, allow 81 s in the test case.
3GPP