2.5 dach- und balkonabläufe 2.5 roof and balcony...
TRANSCRIPT
2.5 Dach- und Balkonabläufe2.5 Roof and balcony drains
Dachabläufe 65, Aufstockelemente 63Roof drains 65, raising pieces 63
246246
Dachabläufe 62, 64 und Aufstockelemente 630Roof drains 62, 64 and raising pieces 630
249249
Sanierungs-DachabläufeRenova roof drains
251251
Dachabläufe [ECCO], Notentwässerung Roof drains [ECCO], emergency drainage
254254
Zubehör zu Dachabläufen 62, 64, 65 und [ECCO]Accessories for roof drains 62, 64, 65 and [ECCO]
257257
Gründach- und Terrassen-AufsätzeGreen roof, planter and balcony gratings
258258
Druckstrom-Dachentwässerung SuperDrain®
Siphonic roof drainage SuperDrain®259259
Balkon- und TerrassenabläufeBalcony and terrace drains
263263
Aufstockelemente und Zubehör zu BalkonabläufenRaising pieces and accessories for balcony drains
272272
2.5
DachabläufeRoof drains
Dachablauf 65 und Aufstockelement 63Rückstausicher und durchdacht. Der 2-teilige Dachablauf von Dallmer bietet viele Vorteile. Vor allem die einfache Montage: Das Aufstockelement wird ins Ablaufgehäuse gesteckt, und fertig! Geeignet für Wärmedämmungen von 50 - 280 mm, ein Kürzen des Aufstockele-mentes ist nicht mehr erforderlich.
Dachablauf 62 mit BrandschutzelementDie Dachabläufe 62 eignen sich zusam-men mit dem Dallmer Brand- und Schall-schutz-Rohbauelement für den Einbau in F 30 - F 90 Decken. (Zulassungs-Nr.: Z-19.17-1800)
Roof drain 65 and extension piece 63Fully sealed and well thought out. Dallmer’s two-part roof drain offers many advantages. First of all, easy fi tting – the extension piece is pushed into the outer body - and that’s it! Suitable for thermal insulation 50 - 250 mm thick, there is no need to shorten the extension piece.
Type 62 roof drain with fi re collarThe type 62 roof drain can be installed with a fi re collar to achieve Class F 30 - F 90 roof decks.(Licence number Z-19 17-1800)
Dachablauf 65 DallBittype 65 DallBit roof drain
Dachablauf 62 DallBittype 62 DallBit roof drain
optional: Brandschutzelementoptional: fi re collar
Planungsbeispiele P 300, P 301 / Standard details P 300, P 301
246
247
Aufstockelementeraising pieces
Aufstockelement 63
Aufstockelement 63 PVC
Aufstockelement 63 DallBitØ354
Ø147
Ø90
Ø123
23
6
41
5 46
5
* DallBit-Ausführung: Gehäuse mit werkseitig aufgeschweißter Bitumenschweißbahn-Manschette, 500 x 500 mm, 5,0 mm stark, mit Edelstahl-Flanschring zur zusätzlichen Sicherheit** PVC-Ausführung: mit Flansch aus PVC
* DallBit: 500 x 500 mm collar of 5.0 mm thick bituminous membrane, welded to the fl ange and fi tted with stainless steel clamp ring** PVC: with PVC fl ange for welding single-ply PVC membranes
DALLMER Aufstockelement 63 passend zu den Dachabläufen 65 und [ECCO]mit: angeformten Lippendichtungen
rückstausicherEdelstahl-Flanschring zur Befestigung von polymeren DachdichtungsbahnenBauschutzrostungekürzt für Wärmedämmung von 50 bis 250 mm
Material: Polypropylen, UV-stabilisiertLippendichtungen aus TPE
DALLMER type 63 raising pieceused with roof drain type 65 and [ECCO]with: multi-ribbed seal
stainless steel clamp ring for securing single-ply membranestemporary blanking plate
height adjustable 50 - 250 mmmaterial: polypropylene/rubber co-moulding,
UV-stabilized
Artikel Art. Nr. VPEAufstockelement 63 Schraubfl ansch 630506 1Aufstockelement 63 DallBit* 630520 1Aufstockelement 63 PVC** 630537 1
Ablaufl eistungen nach DIN EN 1253in Verbindung mit Dachablauf 65
Norm DALLMER Schraubfl ansch
DALLMER PVC
DN 70 1,7 l/s 9,1 l/s 7,0 l/sDN 100 4,5 l/s 8,6 l/s 7,12 l/sDN 125 7,0 l/s 10,0 l/s 10,0 l/s
Flow rate tested to DIN EN 1253in combination with type 65 roof drain
Required DALLMER-clamb ring
DALLMER PVC
DN 70 1.7 l/s 9.1 l/s 7.0 l/sDN 100 4.5 l/s 8.6 l/s 7.12 l/sDN 125 7.0 l/s 10.0 l/s 10.0 l/s
248
Dachabläuferoof drains
Aussparungsmaß/recess size: 255 x 380 mmKernbohrungsmaß/core drill: Ø 255 mm
Ø207
Ø171
18
1
500
360
26
5
DN100
DALLMER Dachablauf 65nach DIN EN 1253Ablaufgehäuse wärmegedämmtAblaufstutzen senkrechtmit: Edelstahl-Flanschring zur
Befestigung von polymeren DachdichtungsbahnenLaubfangkorbBauschutzrost
Material: Polypropylen, UV-stabilisiert
DALLMER type 65 roof drainconforming to DIN EN 1253insulated drain bodyoutlet: verticalwith: stainless steel clamp ring for securing
single-ply membranesdomed grate
temporary blanking platematerial: polypropylene, UV-stabilized
H = Dachablauf beheizbar
Direktanschluss an 230 Volt, Heizband nach VDE 0721, Teil 1/3.78 geprüftLeistungsaufnahme pro Dachablauf: ............................ 10 WattRechnungswert für Absicherung pro Dachablauf: ........................ 0,05 Amp.Empfohlene Absicherungpro Dachanlage: .......................... 16 Amp.
* DallBit-Ausführung: Gehäuse mit werkseitig aufgeschweißter Bitumenschweißbahn-Manschette, 500 x 500 mm, 5,0 mm stark, mit Edelstahl-Flanschring zur zusätzlichen Sicherheit** PVC-Ausführung: mit Flansch aus PVC
H = roof drain heated version:
Connect to 230 V supply, conforming to VDE 0721, Part 1/3.78Power per drain ............................. 10 wattsCurrent per drain ........................ 0.05 ampsSuggested current per roof area.................................. 16 amps
* DallBit: 500 x 500 mm collar of 5.0 mm thick bituminous membrane, welded to the fl ange and fi tted with stainless steel clamp ring** PVC: with PVC fl ange for welding single-ply PVC membranes
Artikel Nennweite Art. Nr. VPEDachablauf 65 Schraubfl ansch DN 70 656049 1Dachablauf 65 Schraubfl ansch DN 100 656063 1Dachablauf 65 Schraubfl ansch DN 125 656087 1
Dachablauf 65 H, Schraubfl ansch, beheizt DN 70 656148 1Dachablauf 65 H, Schraubfl ansch, beheizt DN 100 656162 1Dachablauf 65 H, Schraubfl ansch, beheizt DN 125 656186 1
Dachablauf 65 DallBit* DN 70 652447 1Dachablauf 65 DallBit* DN 100 652461 1Dachablauf 65 DallBit* DN 125 652485 1
Dachablauf 65 H DallBit*, beheizt DN 70 652546 1Dachablauf 65 H DallBit*, beheizt DN 100 652560 1Dachablauf 65 H DallBit*, beheizt DN 125 652584 1
Dachablauf 65 PVC** DN 70 653246 1Dachablauf 65 PVC** DN 100 653260 1Dachablauf 65 PVC** DN 125 653284 1
Dachablauf 65 H PVC**, beheizt DN 70 653345 1Dachablauf 65 H PVC**, beheizt DN 100 653369 1Dachablauf 65 H PVC**, beheizt DN 125 653383 1
Ablaufl eistungen nach DIN EN 1253
Norm DALLMER Schraubfl ansch
DALLMER PVC
DN 70 1,7 l/s 8,6 l/s 7,0 l/sDN 100 4,5 l/s 8,7 l/s 7,12 l/sDN 125 7,0 l/s 12,2 l/s 10,2 l/s
Flow rate tested to DIN EN 1253
Required DALLMER-clamb ring
DALLMER PVC
DN 70 1.7 l/s 8.6 l/s 7.0 l/sDN 100 4.5 l/s 8.7 l/s 7.12 l/sDN 125 7.0 l/s 12.2 l/s 10.2 l/s
249
Dachabläuferoof drains
Aussparungsmaß/recess size: 255 x 380 mmKernbohrungsmaß/core drill: Ø 255 mm
DN100
Ø160
Ø190
Ø300
Ø500
10
35
8
R 30 - 120 Ausrüstung Seite 239 R 30 - 120 options see page 239
H = Dachablauf beheizbar
Direktanschluss an 230 Volt, Heizband nach VDE 0721, Teil 1/3.78 geprüftLeistungsaufnahme pro Dachablauf: ............................ 10 WattRechnungswert für Absicherung pro Dachablauf: ........................ 0,05 Amp.Empfohlene Absicherungpro Dachanlage: .......................... 16 Amp.
* DallBit-Ausführung: Gehäuse mit werkseitig aufgeschweißter Bitumenschweißbahn-Manschette, Ø 500 mm, 5,0 mm stark, mit Edelstahl-Flanschring zur zusätzlichen Sicherheit** PVC-Ausführung: mit Flansch aus PVC
H = roof drain heated version:
Connect to 230 V supply, conforming to VDE 0721, Part 1/3.78Power per drain ............................. 10 wattsCurrent per drain ........................ 0.05 ampsSuggested corrent per roof area.................................. 16 amps
* DallBit: Ø 500 mm collar of 5.0 mm thick bituminous membrane, welded to the fl ange and fi tted with stainless steel clamp ring** PVC: with PVC fl ange for welding single-ply PVC membranes
DALLMER Dachablauf 62nach DIN EN 1253Ablaufgehäuse wärmegedämmt,Ablaufstutzen senkrechtmit: Edelstahl-Flanschring zur
Befestigung von polymeren DachdichtungsbahnenLaubfangkorbBauschutzrost
Material: Polypropylen, UV-stabilisiert
DALLMER type 62 roof drainconforming to DIN EN 1253insulated drain bodyoutlet: verticalwith: stainless steel clamp ring for securing
single-ply membranes domed grate temporary blanking platematerial: polypropylene, UV-stabilized
Artikel Nennweite Art. Nr. VPEDachablauf 62 Schraubfl ansch DN 70 621047 1Dachablauf 62 Schraubfl ansch DN 100 621061 1Dachablauf 62 Schraubfl ansch DN 125 621085 1Dachablauf 62 Schraubfl ansch DN 150 621092 1
Dachablauf 62 H, Schraubfl ansch, beheizt DN 70 621146 1Dachablauf 62 H, Schraubfl ansch, beheizt DN 100 621160 1Dachablauf 62 H, Schraubfl ansch, beheizt DN 125 621184 1Dachablauf 62 H, Schraubfl ansch, beheizt DN 150 621191 1
Dachablauf 62 DallBit* DN 70 622044 1Dachablauf 62 DallBit* DN 100 622068 1Dachablauf 62 DallBit* DN 125 622082 1Dachablauf 62 DallBit* DN 150 622099 1
Dachablauf 62 H DallBit*, beheizt DN 70 622143 1Dachablauf 62 H DallBit*, beheizt DN 100 622167 1Dachablauf 62 H DallBit*, beheizt DN 125 622181 1Dachablauf 62 H DallBit*, beheizt DN 150 622198 1
Dachablauf 62 PVC** DN 70 623041 1Dachablauf 62 PVC** DN 100 623065 1Dachablauf 62 PVC** DN 125 623089 1Dachablauf 62 PVC** DN 150 623096 1
Dachablauf 62 H PVC**, beheizt DN 70 623140 1Dachablauf 62 H PVC**, beheizt DN 100 623164 1Dachablauf 62 H PVC**, beheizt DN 125 623188 1Dachablauf 62 H PVC**, beheizt DN 150 623195 1
Schraubfl ansch/DallBitAblaufl eistungen nach DIN EN 1253
Norm DALLMERDN 70 1,7 l/s 6,70 l/sDN 100 4,5 l/s 7,67 l/sDN 125 7,0 l/s 10,00 l/sDN 150 8,1 l/s 11,06 l/s
Clamp ring/DallBitFlow rate tested to DIN EN 1253
Required DALLMERDN 70 1.7 l/s 6.70 l/sDN 100 4.5 l/s 7.67 l/sDN 125 7.0 l/s 10.00 l/sDN 150 8.1 l/s 11.06 l/s
PVCAblaufl eistungen nach DIN EN 1253
Norm DALLMERDN 70 1,7 l/s 5,3 l/sDN 100 4,5 l/s 6,2 l/sDN 125 7,0 l/s 8,7 l/sDN 150 8,1 l/s 8,7 l/s
PVCFlow rate tested to DIN EN 1253
Required DALLMERDN 70 1.7 l/s 5.3 l/sDN 100 4.5 l/s 6.2 l/sDN 125 7.0 l/s 8.7 l/sDN 150 8.1 l/s 8.7 l/s
250
Dachabläufe, Aufstockelementeroof drains, raising pieces
Aussparungsmaß/recess size: 260 x 380 mm
Ø354
14
2
DN
100
DN
70
265
66
Aussparungsmaß/recess size: 180 x 380 mmKernbohrungsmaß/core drill: Ø 255 mm
* DallBit-Ausführung: Gehäuse mit werkseitig aufgeschweißter Bitumenschweißbahn-Manschette, Ø 500 mm, 5,0 mm stark, mit Edelstahl-Flanschring zur zusätzlichen Sicherheit** PVC-Ausführung: mit Flansch aus PVCH = beheizbare Version
* DallBit: Ø 500 mm collar of 5.0 mm thick bituminous membrane, welded to the fl ange and fi tted with stainless steel clamp ring** PVC: with PVC fl ange for welding single-ply PVC membranesH = heated
DALLMER Dachablauf 62 FPOnach DIN EN 1253Ablaufgehäuse wärmegedämmtAblaufstutzen senkrechtmit: extra breitem Flansch zum Anschluss
von FPO-DachbahnenLaubfangkorbBauschutzrost
Material: Polypropylen, UV-stabilisiert
DALLMER type 62 FPO roof drainconforming to DIN EN 1253insulated drain body outlet: verticalwith: extra wide fl ange for welding to
FPO membranes domed grate temporary blanking platematerial: polypropylene, UV-stabilized
Artikel Nennweite Art. Nr. VPEDachablauf 62 FPO DN 70 621641 1Dachablauf 62 FPO DN 100 621665 1Dachablauf 62 FPO DN 125 621689 1
DALLMER Dachablauf 64nach DIN EN 1253Ablaufgehäuse wärmegedämmt, Ablaufstutzen DN 70/DN 100 3° abgewinkeltmit: Edelstahl-Flanschring zur
Befestigung von polymeren DachdichtungsbahnenLaubfangkorbBauschutzrost
Material: Polypropylen, UV-stabilisiert
DALLMER type 64 roof drainconforming to DIN EN 1253insulated drain body outlet: DN 70/DN 100 side, 3°with: stainless steel clamp ring for securing
single-ply membranes domed grate temporary blanking platematerial: polypropylene, UV-stabilized
DN 70 connects to BS4514 75 mm pipework with 880345 adaptor.
Artikel Nennweite Art. Nr. VPEDachablauf 64 Schraubfl ansch DN 70/DN 100 641076 1Dachablauf 64 DallBit* DN 70/DN 100 642073 1Dachablauf 64 PVC** DN 70/DN 100 643070 1
Dachablauf 64 H, Schraubfl ansch, beheizt DN 70/DN 100 641175 1Dachablauf 64 H DallBit*, beheizt DN 70/DN 100 642172 1Dachablauf 64 H PVC**, beheizt DN 70/DN 100 643179 1
Ablaufl eistungen nach DIN EN 1253Norm DALLMER
DN 70 1,7 l/s 5,1 l/sDN 100 4,5 l/s 6,2 l/sDN 125 7,0 l/s 8,0 l/s
Flow rate tested to DIN EN 1253Required DALLMER
DN 70 1.7 l/s 5.1 l/sDN 100 4.5 l/s 6.2 l/sDN 125 7.0 l/s 8.0 l/s
Ablaufl eistungen nach DIN EN 1253Norm DALLMER
DN 70 1,7 l/s 7,83 l/s (PVC: 5,4)DN 70/100 4,5 l/s 7,18 l/s (PVC: 5,26)
Flow rate tested to DIN EN 1253Required DALLMER
DN 70 1.7 l/s 7.83 l/s (PVC: 5.4)DN 70/100 4.5 l/s 7.18 l/s (PVC: 5.26)
R 30 - 120 Ausrüstung Seite 239 R 30 - 120 options see page 239
DN125
Ø200
Ø354
500
30
1
34
5
DALLMER Aufstockelemente 630passend zu den Dachabläufen 62 und 64mit: Edelstahl-Flanschring zur
Befestigung von polymeren DachdichtungsbahnenRückstaudichtungBauschutzrost
Ablaufstutzen verlängerbar mit Kunststoffrohr DN 125
ungekürzt für Wärmedämmung von 50 bis 250 mm
Material: Polypropylen, UV-stabilisiert
DALLMER type 630 raising pieceused with roof drain types 62, 64with: stainless steel clamp ring for securing
single-ply membranes seal temporary blanking plate can be extended with
DN 125 plastic pipe height adjustable 50 - 250 mmmaterial: polypropylene, UV-stabilized
Artikel Art. Nr. VPEAufstockelement 630 Schraubfl ansch 621580 1Aufstockelement 630 DallBit* 622587 1Aufstockelement 630 PVC** 623584 1
Sanierungs-Dachablauf 63 TType 63 T Renova roof drain
Für die Dachsanierung: Der 63 THäufi g kommt es vor, dass auf Dächern Dachgullys vorhanden sind, die bei Sanierungsarbeiten nur mit großem Aufwand entfernt oder ausgetauscht werden können. Für diesen Fall haben wir den Sanierungsablauf 63 T entwickelt. Denn mit seinen innovativen Lippendichtungen, die gleichzeitig vor Rückstau schützen, wird er einfach in bestehende Gehäuse hinein gesteckt. Den 63 T gibt es in Ausführungen für alle gängigen Dachabdichtungsmaterialien.
For roof renovation: the 63 TFrequently exisiting roof drains are very diffi cult to remove or replace during roof renovation work. We have developed the 63 T Renova roof drain, which makes incorporating existing drains in a re-roofi ng project possible at low cost. The Renova roof drain has a series of innovative lip-seals and is simply pushed through the existing gully body. The seal between the old and new drain eliminates any risk of water infi ltration from back up. The 63 T Renova is available in different types for all roof membranes in normal use.
Sanierungs-Dachablauf 63 T DallBittype 63 T DallBit Renova roof drain
Planungsbeispiel P 351 / Standard detail P 351
251
252
Sanierungs-DachabläufeRenova roof drains
NEU!!
* DallBit-Ausführung: Gehäuse mit werkseitig aufgeschweißter Bitumenschweißbahn-Manschette, 500 x 500 mm, 5,0 mm stark, mit Edelstahl-Flanschring zur zusätzlichen Sicherheit** FPO-Ausführung: Direkt verschweißbar mit FPO-Dachbahnen auf Werkstoffbasis Polypro-pylen
* DallBit: 500 x 500 mm collar of 5.0 mm thick bituminous membrane, welded to the fl ange and fi tted with stainless steel clamp ring** FPO:
DALLMER Sanierungs-Dachablauf 63 T DallBit zum Einstecken in Dachabläufe/Entwässerungs-rohremit: angeformten Lippendichtungen,
aufgeschweißter BitumenmanschetteEdelstahl-FlanschringLaubfangkorb, verschraubtBauschutzdeckel
Material: Polypropylen, UV-stabilisiertTPE - thermoplastisches Elastomer
DALLMER type 63 T Renova roof drainDallBitinstalled by pushing into the bore of pipe, usually without removing the existing roof drainwith: multi ribbed seal
incorporates a collar of bituminius membrane
stainless steel clamp ring domed grating, secured
temporary blanking platematerial: polypropylene, UV-stabilized
rubber co-moulding
Artikel Höhe Nennweite Art. Nr. VPESanierungs-Dachablauf 63 T DallBit* 345 mm DN 70 innen 630247 1Sanierungs-Dachablauf 63 T DallBit* 460 mm DN 100 innen 630261 1Sanierungs-Dachablauf 63 T DallBit* 460 mm DN 125 innen 630285 1Sanierungs-Dachablauf 63 T DallBit* 345 mm DN 150 innen 630292 1
DALLMER Sanierungs-Dachablauf 63 T FPO zum Einstecken in Dachabläufe/Entwässerungs-rohremit: angeformten Lippendichtungen,
LaubfangkorbBauschutzrost
Material: Polypropylen, UV-stabilisiertTPE - thermoplastisches Elastomer
DALLMER type 63 T Renova roof drainFPOinstalled by pushing into the bore of pipe, usually without removing the existing roof drainwith: multi ribbed seal
domed grating temporary blanking platematerial: polypropylene, UV-stabilized
rubber co-moulding
Artikel Höhe Nennweite Art. Nr. VPESanierungs-Dachablauf 63 T FPO** 345 mm DN 70 innen 630841 1Sanierungs-Dachablauf 63 T FPO** 460 mm DN 100 innen 630865 1Sanierungs-Dachablauf 63 T FPO** 460 mm DN 125 innen 630889 1
Lippendichtung aus TPEmulti ribbed rubber seal
DN 70 fi ts B.S. 68 mm. 82 mm version available
Ablaufl eistungen nach DIN EN 1253Norm DALLMER
DN 70 1,7 l/s 5,38 l/sDN 100 4,5 l/s 5,42 l/sDN 125 7,0 l/s 7,82 l/sDN 150 8,1 l/s 10,3 l/s
Flow rate tested to DIN EN 1253Required DALLMER
DN 70 1.7 l/s 5.38 l/sDN 100 4.5 l/s 5.42 l/sDN 125 7.0 l/s 7.82 l/sDN 150 8.1 l/s 10.3 l/s
Ablaufl eistungen nach DIN EN 1253Norm DALLMER
DN 70 1,7 l/s 7,5 l/sDN 100 4,5 l/s 7,8 l/sDN 125 7,0 l/s 11,0 l/s
Flow rate tested to DIN EN 1253Required DALLMER
DN 70 1.7 l/s 7.5 l/sDN 100 4.5 l/s 7.8 l/sDN 125 7.0 l/s 11.0 l/s
NEU!
253
Sanierungs-DachabläufeRenova roof drains
Sanierungs-Dachablauf 84
Sanierungs-Dachablauf 84 DallBit
* DallBit-Ausführung: Gehäuse mit werkseitig aufgeschweißter Bitumenschweißbahn-Manschette, Ø 420 mm, 5,0 mm stark, mit Edelstahl-Flanschring zur zusätzlichen Sicherheit** PVC-Ausführung: mit Flansch aus PVC
DN 70 fi ts B.S. 68 mm. 82 mm version available
* DallBit: Ø 420 mm collar of 5.0 mm thick bituminous membrane, welded to the fl ange and fi tted with stainless steel clamp ring** PVC: with PVC fl ange for welding single-ply PVC membranes
DALLMER Sanierungs-Dachablauf 84zum Hineinstecken in Entwässerungsrohre DN 100 (evtl. durch vorhandene Abläufe hindurch)mit: Edelstahl-Flanschring zur
Befestigung von polymeren Dachdichtungsbahnenangeformten LippendichtungenLaubfangkorbBauschutzdeckel
Material: Polypropylen, UV-stabilisiert, TPE-thermoplastisches Elastomer
DALLMER type 84 Renova roof draininstalled by pushing into the bore of pipe DN 100, usually without removing the existing roof drainwith: stainless steel clamp ring for securing
single-ply membranesmulti ribbed seal
domed grating temporary blanking platematerial: polypropylene, UV-stabilized
rubber co-moulding
Artikel Nennweite Art. Nr. VPESanierungs-Dachablauf 84 Schraubfl ansch DN 70 innen 831248 1Sanierungs-Dachablauf 84 Schraubfl ansch DN 100 innen 831262 1Sanierungs-Dachablauf 84 DallBit* DN 70 innen 832245 1Sanierungs-Dachablauf 84 DallBit* DN 100 innen 832269 1
Ablaufl eistungen nach DIN EN 1253Norm DALLMER
DN 100 4,5 l/s 5,0 l/s
Flow rate tested to DIN EN 1253Required DALLMER
DN 100 4.5 l/s 5.0 l/s
DALLMER Sanierungs-Dachablauf 63 T zum Einstecken in Dachabläufe/Entwässerungs-rohremit: angeformten Lippendichtungen,
Edelstahl-Flanschring zur Befestigung von polymeren DachdichtungsbahnenLaubfangkorbBauschutzrost
Material: Polypropylen, UV-stabilisiertTPE - thermoplastisches Elastomer
DALLMER type 63 T Renova roof draininstalled by pushing into the bore of pipe, usually without removing the existing roof drainwith: multi ribbed seal stainless steel clamp ring for securing
single-ply membranes domed grating temporary blanking platematerial: polypropylene, UV-stabilized
rubber co-moulding
Artikel Höhe Nennweite Art. Nr. VPESanierungs-Dachablauf 63 T Schraubfl ansch 345 mm DN 70 innen 630049 1Sanierungs-Dachablauf 63 T Schraubfl ansch 460 mm DN 100 innen 630063 1Sanierungs-Dachablauf 63 T Schraubfl ansch 460 mm DN 125 innen 630087 1Sanierungs-Dachablauf 63 T Schraubfl ansch 345 mm DN 150 innen 630094 1
Sanierungs-Dachablauf 63 T PVC** 345 mm DN 70 innen 630346 1Sanierungs-Dachablauf 63 T PVC** 460 mm DN 100 innen 630360 1Sanierungs-Dachablauf 63 T PVC** 460 mm DN 125 innen 630384 1Sanierungs-Dachablauf 63 T PVC** 345 mm DN 150 innen 630391 1
Ø Ø Rohrstutzen Außenkante DichtlippenDN 70 56 mm 73,5 mmDN 100 90 mm 108 mmDN 125 90 mm 123 mmDN 150 125 mm 159 mm
Bemaßungen: Lippendurchmesser von - bis
Dachablauf Ø Ø63 T mind. Lippen max LippenDN 70 64 mm 73,5 mmDN 100 100 mm 108 mmDN 125 105 mm 123 mmDN 150 145 mm 159 mm
Ablaufl eistungen nach DIN EN 1253
Norm DALLMER Schraubfl ansch
DALLMER PVC
DN 70 1,7 l/s 7,5 l/s 6,34 l/sDN 100 4,5 l/s 7,8 l/s 6,65 l/sDN 125 7,0 l/s 11,0 l/s 10,1 l/sDN 150 8,1 l/s 10,3 l/s 9,0 l/s
Flow rate tested to DIN EN 1253
Required DALLMER-clamb ring
DALLMER PVC
DN 70 1.7 l/s 7.5 l/s 6.34 l/sDN 100 4.5 l/s 7.8 l/s 6.65 l/sDN 125 7.0 l/s 11.0 l/s 10.1 l/sDN 150 8.1 l/s 10.3 l/s 9.0 l/s
Dachabläufe [ECCO], Notentwässerung Roof drains type [ECCO], emergency drainage
Anstauring zur Notentwässerungupstand for overfl ow
Dachablauf [ECCO] 160type [ECCO] 160 roof drain
Dachablauf [ECCO] 90type [ECCO] 90 roof drain
[ECCO], die Lösung für intensiven RegenDas Klima hat sich dramatisch verändert. Sommergewitter mit erheblich über den kalkulierten Normenwerten liegenden Regenereignissen führen zu Rückstau im Entwässerungssystem. Die Konsequenz kann daher nur heißen: Einteilige Dach-abläufe oder aber zuverlässige Rückstau-dichtungen einbauen! Dallmer bietet mit seiner Dachablaufserie [ECCO] für beide Fälle eine einleuchten-de Lösung, denn diese Abläufe werden einteilig eingebaut. Die Ablaufl eistungen liegen weit über den Anforderungen. Windsogsicherheit wird durch die mecha-nische Verbindung der Abläufe mit dem Dachunterbau erzielt. Beides bedeutet zusätzliche Sicherheit, auch bei Wind- und regenintensiven Gewittern, mit denen in Zukunft immer häufi ger gerechnet werden muss.
Anstauring zur NotentwässerungLaut DIN 1986 - 100 muss jedes Flach-dach gegen das „Fünfminutenregener-eignis einmal in 100 Jahren“ abgesichert werden. Dallmer Notabläufe (Dachablauf mit Anstauring) entwässern das Flachdach dort, wo das Wasser anfällt. Und das mit erheblich besseren Ablaufl eistungen als einfache Attikaabläufe aufweisen.
[ECCO], the solution for higher rainfallThe climate is changing dramatically.Summer storms with rainfall considerably in excess of the calculated standard values leads to water backing up in drainage systems. Seals in two-piece roof drains can be fi tted badly or not fi tted at all. As a result, the building and the roof structure is at risk from water entering it. There is just one conclusion to be drawn from this – use one-piece roof drains, or else build-in reliable seals! Dallmer offers a clear advantage with its [ECCO] roof drains, because they are constructed in one piece. This enables drainage outputs to be achieved which are well above the requirements in the relevant Standards. Furthermore they are proofed against wind suction. Both means additional security, even in the sort of exceptional storm- and rainfall events which will increasingly have to be reckoned with in the future.
Upstands for emergency drainageAccording to DIN 1986-100 every fl at roof must be made secure against the “fi ve-minute rainfall that happens once in a 100 years”. Dallmer overfl ows (a roof drain with an upstand) drain a fl at roof where the water accumulates. For example, in the case of large roof areas, from the centre of the fl at roof outwards, not just from the edge of the building. And it does so with substantially better drainage output than simple parapet drains.
Planungsbeispiel P 302 / Standard detail P 302
254
255
Aussparungsmaß/recess size: 255 x 400 mmKernbohrungsmaß/core drill: Ø 255 mm
284
17
1
Ø171
500
95
-15
5
360
DN100
Dachabläufe [ECCO]roof drains [ECCO]
* DallBit-Ausführung: Gehäuse mit werkseitig aufgeschweißter Bitumenschweißbahn-Manschette, 500 x 500 mm, 5,0 mm stark, mit Edelstahl-Flanschring zur zusätzlichen Sicherheit** PVC-Ausführung: mit Flansch aus PVCH = beheizbare Version
* DallBit: 500 x 500 mm collar of 5.0 mm thick bituminous membrane, welded to the fl ange and fi tted with stainless steel clamp ring** PVC: with PVC fl ange for welding single-ply PVC membranesH = heated
DALLMER Dachablauf [ECCO] 160 nach DIN EN 1253einteiliges Ablaufelement, wärmegedämmt und höhenverstellbar, zum Einbau in Wärmedämmungen von 95 bis 155 mmRückstau- und Windsoggesichertmit: einteiliger Montagebox
Edelstahl-Flanschring zur Befestigung von polymeren DachdichtungsbahnenLaubfangkorbBauschutzrost
Material: Polypropylen, UV-stabilisiert
DALLMER type [ECCO] 160 roof drainconforming to DIN EN 1253one-piece insulated drain body, height adjustable for roof insulation 95-155 mm thicksealed against backfl ow, secured against wind suctionwith: one-piece telescopic fl ange
stainless steel clamp ring for securing single-ply membranes
domed grate temporary blanking plate material: polypropylene, UV-stabilized
Artikel Nennweite Art. Nr. VPEDachablauf [ECCO] 160 Schraubfl ansch DN 70 651044 1Dachablauf [ECCO] 160 Schraubfl ansch DN 100 651068 1Dachablauf [ECCO] 160 Schraubfl ansch DN 125 651082 1
Dachablauf [ECCO] 160 H, Schraubfl ansch, beheizt DN 70 651143 1Dachablauf [ECCO] 160 H, Schraubfl ansch, beheizt DN 100 651167 1Dachablauf [ECCO] 160 H, Schraubfl ansch, beheizt DN 125 651181 1
Dachablauf [ECCO] 160 DallBit* DN 70 652041 1Dachablauf [ECCO] 160 DallBit* DN 100 652065 1Dachablauf [ECCO] 160 DallBit* DN 125 652089 1
Dachablauf [ECCO] 160 H DallBit*, beheizt DN 70 652140 1Dachablauf [ECCO] 160 H DallBit*, beheizt DN 100 652164 1Dachablauf [ECCO] 160 H DallBit*, beheizt DN 125 652188 1
Dachablauf [ECCO] 160 PVC** DN 70 653048 1Dachablauf [ECCO] 160 PVC** DN 100 653062 1Dachablauf [ECCO] 160 PVC** DN 125 653086 1
Dachablauf [ECCO] 160 H PVC**, beheizt DN 70 653147 1Dachablauf [ECCO] 160 H PVC**, beheizt DN 100 653161 1Dachablauf [ECCO] 160 H PVC**, beheizt DN 125 653185 1
Ablaufl eistungen nach DIN EN 1253
Norm DALLMER Schraubfl ansch
DALLMER PVC
DN 70 1,7 l/s 8,6 l/s 6,48 l/sDN 100 4,5 l/s 8,7 l/s 5,82 l/sDN 125 7,0 l/s 12,2 l/s 9,25 l/s
Flow rate tested to DIN EN 1253
Required DALLMER-clamb ring
DALLMER PVC
DN 70 1.7 l/s 8.6 l/s 6.48 l/sDN 100 4.5 l/s 8.7 l/s 5.82 l/sDN 125 7.0 l/s 12.2 l/s 9.25 l/s
256
Aussparungsmaß/recess size: 255 x 400 mmKernbohrungsmaß/core drill: Ø 255 mm
DALLMER Dachablauf [ECCO] 90 nach DIN EN 1253einteiliges Ablaufelement wärmegedämmt und höhenverstellbar zum Einbau in Wärmedämmungen von 60 bis 100 mmRückstau- und Windsoggesichertmit: einteiliger Montagebox
Edelstahl-Flanschring zur Befestigung von polymeren DachdichtungsbahnenLaubfangkorbBauschutzrost
Material: Polypropylen, UV-stabilisiert
DALLMER type [ECCO] 90 roof drainconforming to DIN EN 1253one-piece insulated drain body, height adjustable for roof insulation 60-100 mm thicksealed against backfl ow, secured against wind suctionwith: one-piece telescopic fl ange
stainless steel clamp ring for securing single-ply membranes
domed grate temporary blanking plate material: polypropylene, UV-stabilized
Dachabläufe [ECCO] und Anstauringeroof drains [ECCO] and upstands
Artikel Nennweite Art. Nr. VPEDachablauf [ECCO] 90 Schraubfl ansch DN 70 654045 1Dachablauf [ECCO] 90 Schraubfl ansch DN 100 654069 1Dachablauf [ECCO] 90 Schraubfl ansch DN 125 654083 1
Dachablauf [ECCO] 90 H, Schraubfl ansch, beheizt DN 70 654144 1Dachablauf [ECCO] 90 H, Schraubfl ansch, beheizt DN 100 654168 1Dachablauf [ECCO] 90 H, Schraubfl ansch, beheizt DN 125 654182 1
Dachablauf [ECCO] 90 DallBit* DN 70 652249 1Dachablauf [ECCO] 90 DallBit* DN 100 652263 1Dachablauf [ECCO] 90 DallBit* DN 125 652287 1
Dachablauf [ECCO] 90 H DallBit*, beheizt DN 70 652348 1Dachablauf [ECCO] 90 H DallBit*, beheizt DN 100 652362 1Dachablauf [ECCO] 90 H DallBit*, beheizt DN 125 652386 1
Dachablauf [ECCO] 90 PVC** DN 70 653444 1Dachablauf [ECCO] 90 PVC** DN 100 653468 1Dachablauf [ECCO] 90 PVC** DN 125 653482 1
Dachablauf [ECCO] 90 H PVC**, beheizt DN 70 653543 1Dachablauf [ECCO] 90 H PVC**, beheizt DN 100 653567 1Dachablauf [ECCO] 90 H PVC**, beheizt DN 125 653581 1
* DallBit-Ausführung: Gehäuse mit werkseitig aufgeschweißter Bitumenschweißbahn-Manschette, 500 x 500 mm, 5,0 mm stark, mit Edelstahl-Flanschring zur zusätzlichen Sicherheit** PVC-Ausführung: mit Flansch aus PVCH = beheizbare Version
* DallBit: 500 x 500 mm collar of 5.0 mm thick bituminous membrane, welded to the fl ange and fi tted with stainless steel clamp ring** PVC: with PVC fl ange for welding single-ply PVC membranesH = heated
284
Ø171
22
0
18
1
DN70
Ø207
378
60
-10
0
360
DALLMER Anstauring zur Notentwässerungpassend zu allen DALLMER Dachabläufenzur Sicherstellung der Notentwässerung auf Flachdächern nach EN 12056-3Material: Polypropylen, UV-stabilisiert oder PVC
DALLMER overfl ow upstandused with DALLMER roof drains 62, 64, 65, [ECCO], height to be selected according to rainfall calculationmaterial: polypropylene, UV-stabilized, PVC
Artikel Anstauhöhe Art. Nr. VPEAnstauring PP für Notabläufe DN 70 bis DN 100 35 mm 620613 1Anstauring PP für Notabläufe DN 125 bis DN 150 45 mm 620620 1Anstauring PP für Notabläufe Superdrain® DN 70 55 mm 620637 1
Anstauring PVC für Notabläufe DN 70 35 mm 620644 1Anstauring PVC für Notabläufe DN 125 bis DN 150 45 mm 620651 1Anstauring PVC für Notabläufe Superdrain® DN 70 55 mm 620668 1
Ø300
Ø250Ø400
50
35
Ablaufl eistungen nach DIN EN 1253
Norm DALLMER Schraubfl ansch
DALLMER PVC
DN 70 1,7 l/s 8,6 l/s 6,48 l/sDN 100 4,5 l/s 8,7 l/s 5,82 l/sDN 125 7,0 l/s 12,2 l/s 9,25 l/s
Flow rate tested to DIN EN 1253
Required DALLMER-clamb ring
DALLMER PVC
DN 70 1.7 l/s 8.6 l/s 6.48 l/sDN 100 4.5 l/s 8.7 l/s 5.82 l/sDN 125 7.0 l/s 12.2 l/s 9.25 l/s
257
Zubehöraccessories
75
Ø170
Ø150
11
53
2
Ø170
41
28
,5Ø156
Ø171
DALLMER Kies- und Laubfangkorb S 15passend zu den Dachabläufen 62, 64, 65 und[ECCO] sowie zu den Aufstockelementen 630 und 63Material: Polypropylen, UV-stabilisiert
DALLMER Kies- und Laubfangkorb 63 Tpassend zu den Sanierungs-Dachabläufen 63 T DallBit und FPO, DN 70 - DN 125mit: Befestigungsschrauben Edelstahl 1.4301Material: Polypropylen, UV-stabilisiert
DALLMER Anschluss-Manschette 65aus hochpolymeren Dichtungsbahnen, passend zu den Dachabläufen 62, 64, 65, [ECCO] sowie zu den Aufstockelementen 630 und 63
DALLMER Flachrost S 15passend zu den Dachabläufen 62, 64, 65 und[ECCO] sowie zu den Aufstockelementen 630 und 63Material: Polypropylen, UV-stabilisiert
DALLMER Einlaufelement/Kiesfang S 15passend zu den Dachabläufen 62, 64, 65 und[ECCO] sowie zu den Aufstockelementen 630 und 63 bei Einsatz von TerrassenaufsätzenMaterial: Polypropylen, UV-stabilisiert
DALLMER type 65 waterproofi ng collarcut from single-ply membrane materialused with roof drain types 62, 64, 65, [ECCO] and type 630, 63 raising piece
DALLMER type S 15 domed grating/gravel guardused with roof drain types 62, 64, 65, [ECCO] and raising piece types 630 and 63material: polypropylene, UV-stabilized
DALLMER type 63 T domed grating/gravel guardused with type 63 T renova roof drain DallBit and FPO, DN 70 - DN 125with: securing screws 304 stainless steelmaterial: polypropylene, UV-stabilized
DALLMER type S 15 perforated collar/gravel guardused with roof drain types 62, 64, 65, [ECCO] and raising piece types 630 and 63 in combination with balcony gratingsmaterial: polypropylene, UV-stabilized
DALLMER type S 15 fl at grateused with roof drain types 62, 64, 65, [ECCO] and raising piece types 630 and 63material: polypropylene, UV-stabilized
DALLMER Kies- und Laubfangkorb S 15, Edelstahlpassend zu den Dachabläufen 62, 64, 65 und[ECCO] sowie zu den Aufstockelementen 630 und 63Material: Edelstahl 1.4301
DALLMER type S 15 stainless steeldomed grating/gravel guardused with roof drain types 62, 64, 65, [ECCO] and raising piece types 630 and 63material: 304 stainless steel
Artikel Abmessungen Art. Nr. VPEAnschluss-Manschette 65, PVC-weich 500 x 500 mm 790217 30Anschluss-Manschette 65, EPDM 500 x 500 mm 790224 30
Artikel Abmessungen Art. Nr. VPEKies-/Laubfangkorb S 15 Ø 170 mm 620996 1
Kies-/Laubfangkorb 63 T Ø 237 mm 620866 1
Artikel Abmessungen Art. Nr. VPEKies-/Laubfangkorb S 15, Edelstahl Ø 156 mm 620934 1
Artikel Abmessungen Art. Nr. VPEEinlaufelement/Kiesfang S 15 Ø 170 mm 590121 1
Artikel Abmessungen Art. Nr. VPEFlachrost S 15 Ø 170 mm 590183 1
Suitable for use in raised pavior areas.
Anschluss-Manschetten aus anderen Dichtungs-bahnen auf Anfrage.
Other material on request.
Kies- und Laubfangkorb S 15
Kies- und Laubfangkorb 63 T
237
75
258
Aufsätzegratings
362
10
0
325
240
362
10
0
325
240
15
Ø145
150
23
30
-18
0
Ø145
150
15
23
30
-18
0
Ø145
200
14
23
29
-18
2
Drainage-Aufstockelement
Drainage-Aufsatz
Terrassenaufsatz SEN 15
Terrassenaufsatz SES 15
Terrassenaufsatz GES 20
Maßesize
höhenverstellbarheight adjustment
Einstecktiefeinsert depth
DALLMER Drainage-Aufsatzfür Gründächermit: 4 Anschlußmöglichkeiten für
DrainagerohreAufsatz: PUR, 362 x 362 mm, Höhe 100 mmRost: Aluminium, 240 x 240 mm
DALLMER Drainage-Aufstockelementfür Gründächer, Verlängerung zum Drainage-aufsatz, Erhöhung um 93 mmmit: 4 Anschlußmöglichkeiten für
DrainagerohreAufsatz: PUR, 362 x 362 mm
DALLMER Terrassen-Aufsatzpassend zu den Dachabläufen 62, 64, 65 und[ECCO] sowie zu den Aufstockelementen 630 und 63SES 15: Rahmen aus Edelstahl 1.4301, Rost
aus Edelstahl 1.4404, massiv 5 mm, verschraubt, Klasse L 15
SEN 15: Rahmen aus Edelstahl 1.4301, Rost aus Edelstahl 1.4301, verschraubt, Klasse K 3
GES 20: Rahmen aus Kunststoff, Rost aus Edelstahl 1.4404, massiv 5 mm, verschraubt, Klasse L 15
DALLMER balcony grating used with roof drain types 62, 64, 65, [ECCO] and raising piece types 630 and 63SES 15: frame: 304 stainless steel,
150 x 150 mm grate: 5 mm 316 stainless steel,
securedSEN 15: frame: 304 stainless steel,
150 x 150 mmgrate: 304 stainless steel, secured
GES 20: frame: polypropylene, 200 x 200 mm,grate: 5 mm 316 stainless steel, secured
DALLMER gratingfor “green“ roofswith: cast aluminium grate,
240 x 240 mm height: 100 mmmaterial: polyurethane/aluminium
DALLMER raising piecefor use with DALLMER ”green“ roof grating, without grateeffective height: 93 mmmaterial: polyurethane
DALLMER liefert als Zubehör eine Anzahl weiterer Aufsätze. Sollten Sie besondere Anforderungen oder Wünsche haben, so fragen Sie uns bitte nach Alternativen.
DALLMER can supply a wide variety of gratings for use on balconies. Please tell us what you need and we can advise the correct type.
Artikel Abmessungen Art. Nr. VPEDrainage-Aufsatz 362 x 362 mm 620958 1
Drainage-Aufstockelement 362 x 362 mm 620965 1
Artikel Abmessungen Art. Nr. VPETerrassen-Aufsatz SES 15 150 x 150 mm 500304 1Terrassen-Aufsatz SEN 15 150 x 150 mm 500311 1Terrassen-Aufsatz GES 20 200 x 200 mm 500328 1
Dachentwässerungssysteme mit Druck-strömung bieten im Vergleich zur herkömmlichen Freispiegelentwässerung wesentliche Vorteile. Bei dieser Technik werden die Entwässerungsleitungen bei Regen planmäßig voll gefüllt betrieben und die geodätische Druckhöhe zwischen Dachablauf und Übergang in die Frei-spiegelentwässerung wird zur Über-windung der Strömungsverluste genutzt. Durch die typischen Betriebszustände, die in solchen Anlagen auftreten, können die Leitungen gefällelos unterhalb der Dachkonstruktion, bei weitgehendem Verzicht auf Grundleitungen, verlegt werden. Das spart Material und Arbeits-zeit, Dachfl ächen werden auch bei großen Regenmengen sicher entwässert. Gerne helfen wir Ihnen bei der Planung, Berechnung und Ausführung von SuperDrain®-Entwässerungsanlagen. Sprechen Sie uns an, wenn Sie einen konkreten Bedarf haben.
The siphonic waySiphonic roof drainage takes advantage of established scientifi c facts - the Laws of Hydraulics. The Dallmer SuperDrain® siphonic system uses smaller diameter pipework laid as a collector network under the roof. This saves space and cost. SuperDrains® are self-priming and prevent air-entrapment as rainwater systematically fi lls the bores of the pipes. Siphonage will be induced. Negative pressure literally sucks rainwater out of the collector network, usually to a single down-pipe at one end of the building. There is no need to build up a head of water on the roof. The computer-aided design programme will optimise the drainage layout and functioning. The velocity of the water ensures the system is self-cleansing and largely maintenance-free. Dallmer will be pleased to advise on the layout and fl ow calculations for your SuperDrain® siphonic drainage project : please contact us.
Druckstrom-Dachentwässerung SuperDrain®
Siphonic roof drainage with SuperDrain®
Aufstockelement 63 SuperDrain®
type 63 SuperDrain® raising piece
Dachablauf SuperDrain® 62type 62 SuperDrain® roof drain
Dachablauf SuperDrain® [ECCO] 90type [ECCO] 90 SuperDrain® roof drain
Planungsbeispiel P 303 / Standard detail P 303
259
260
Dachabläufe für DruckrohrentwässerungSiphonic roof drains
* DallBit-Ausführung: Gehäuse mit werkseitig aufgeschweißter Bitumenschweißbahn-Manschette, 500 x 500 mm, 5,0 mm stark, mit Edelstahl-Flanschring zur zusätzlichen Sicherheit** PVC-Ausführung: mit Flansch aus PVCH = beheizbare Version
* DallBit: 500 x 500 mm collar of 5.0 mm thick bituminous membrane, welded to the fl ange and fi tted with stainless steel clamp ring** PVC: with PVC fl ange for welding single-ply PVC membranesH = heated
DALLMER Aufstockelement SuperDrain® 63 mit: angeformter Lippendichtung
SuperDrain®-Einsatz Edelstahl-Flanschring zur Befestigung von polymeren Dachdichtungsbahnen Bauschutzrostungekürzt für Wärmedämmung von 50 bis 280 mm
Material: Polypropylen, UV-stabilisiertTPE - thermoplastisches Elastomer
Zum Einbau in eine Dachentwässerungsanlage mit Druckströmung zusammen mit dem Dachablauf 65, DN 70
DALLMER raising piece type 63SuperDrain® with: SuperDrain® insert for use with a calculated siphonic roof drainage
systemmulti-ribbed sealstainless steel clamp ring for securing single-ply membranes
height adjustable 50 - 280 mmmaterial: polypropylene/rubber, co-moulding,
UV-stabilizedUsed with roof drain type 65, DN 70
DALLMER Dachablauf 65 nach DIN EN 1253Ablaufgehäuse wärmegedämmt mit: Edelstahl-Flanschring zur
Befestigung von polymeren DachdichtungsbahnenLaubfangkorbBauschutzrost
Material: Polypropylen, UV-stabilisiert
DALLMER type 65 roof drainconforming to DIN EN 1253insulated drain bodywith: stainless steel clamp ring for securing
single-ply membranes domed grate temporary blanking platematerial: polypropylene, UV-stabilized
Artikel Nennweite Art. Nr. VPEDachablauf 65 Schraubfl ansch DN 70 656049 1Dachablauf 65 H, Schraubfl ansch, beheizt DN 70 656148 1
Dachablauf 65 DallBit* DN 70 652447 1Dachablauf 65 H DallBit*, beheizt DN 70 652546 1
Dachablauf 65 PVC** DN 70 653246 1Dachablauf 65 H PVC**, beheizt DN 70 653345 1
Artikel Art. Nr. VPEAufstockelement SuperDrain® 63 Schraubfl ansch 630704 1Aufstockelement SuperDrain® 63 DallBit* 630728 1Aufstockelement SuperDrain® 63 PVC** 630735 1
Die perfekte Kombination:Dachablauf 65 mitSuperDrain® Aufstockelement 63
The perfect combination:Type 65 roof drain body with SuperDrain® type 63 raising piece
DnAm
M
ADD
Aussparungsmaß/recess size: 220 x 380 mmKernbohrungsmaß/core drill: Ø 220 mm
DN70
Ø207
Ø171
18
1 26
5
360
261
Dachabläufe [ECCO] für DruckrohrentwässerungSiphonic roof drains [ECCO]
Aussparungsmaß/recess size: 220 x 400 mmKernbohrungsmaß/core drill: Ø 220 mm
Aussparungsmaß/recess size: 200 x 400 mmKernbohrungsmaß/core drill: Ø 180 mm
DALLMER DachablaufSuperDrain® [ECCO] 90 nach DIN EN 1253Für den Einbau in Dachentwässerungsanlagen mit Druckströmung. Ablaufelement wärme-gedämmt und höhenverstellbar zum Einbau in Wärmedämmungen von 60 bis 100 mm.Rückstaugesichertmit: Montagebox
SuperDrain®-EinsatzEdelstahl-Flanschring zur Befestigung von polymeren Dachdichtungsbahnen LaubfangkorbBauschutzrost
Material: Polypropylen, UV-stabilisiert
DALLMER type 90 SuperDrain® [ECCO] roof drainconforming to DIN EN 1253insulated drain body, height adjustable for roof insulation 60-100 mm thickfor use with a calculated siphonic roof drainage systemsealed against backfl owwith: telescopic fl ange
SuperDrain®-insert stainless steel clamp ring for securing
single-ply membranes domed grate temporary blanking plate material: polypropylene, UV-stabilized
DALLMER type 160 SuperDrain® [ECCO] roof drainconforming to DIN EN 1253insulated drain body, height adjustable for roof insulation 95-155 mm thickfor use with a calculated siphonic roof drainage systemsealed against backfl owwith: telescopic fl ange
SuperDrain®-insert stainless steel clamp ring for securing
single-ply membranes domed grate temporary blanking plate material: polypropylene, UV-stabilized
DALLMER Dachablauf SuperDrain® [ECCO] 160 nach DIN EN 1253Für den Einbau in Dachentwässerungsanlagen mit Druckströmung. Ablaufelement wärme-gedämmt und höhenverstellbar zum Einbau in Wärmedämmungen von 95 bis 155 mm.Rückstaugesichertmit: Montagebox
SuperDrain®-EinsatzEdelstahl-Flanschring zur Befestigung von polymeren DachdichtungsbahnenLaubfangkorbBauschutzrost
Material: Polypropylen, UV-stabilisiert
Artikel Nennweite Art. Nr. VPEDachablauf SuperDrain® [ECCO] 90 Schraubfl ansch DN 70 634047 1Dachablauf SuperDrain® [ECCO] 90 H, Schraubfl ansch, beheizt DN 70 634146 1
Dachablauf SuperDrain® [ECCO] 90 DallBit* DN 70 632241 1Dachablauf SuperDrain® [ECCO] 90 H DallBit*, beheizt DN 70 632340 1
Dachablauf SuperDrain® [ECCO] 90 PVC** DN 70 633248 1Dachablauf SuperDrain® [ECCO] 90 H PVC*, beheizt DN 70 633347 1
* DallBit-Ausführung: Gehäuse mit werkseitig aufgeschweißter Bitumenschweißbahn-Manschette, 500 x 500 mm, 5,0 mm stark, mit Edelstahl-Flanschring zur zusätzlichen Sicherheit** PVC-Ausführung: mit Flansch aus PVCH = beheizbare Version
* DallBit: 500 x 500 mm collar of 5.0 mm thick bituminous membrane, welded to the fl ange and fi tted with stainless steel clamp ring** PVC: with PVC fl ange for welding single-ply PVC membranesH = heated
Artikel Nennweite Art. Nr. VPEDachablauf SuperDrain® [ECCO] 160 Schraubfl ansch DN 70 631046 1Dachablauf SuperDrain® [ECCO] 160 H, Schraubfl ansch, beheizt DN 70 631145 1
Dachablauf SuperDrain® [ECCO] 160 DallBit* DN 70 632043 1Dachablauf SuperDrain® [ECCO] 160 H DallBit*, beheizt DN 70 632142 1
Dachablauf SuperDrain® [ECCO] 160 PVC** DN 70 633040 1Dachablauf SuperDrain® [ECCO] 160 H PVC**, beheizt DN 70 633149 1
262
Dachabläufe für DruckrohrentwässerungSiphonic roof drains
DALLMER Dachablauf SuperDrain® 62nach DIN EN 1253Für den Einbau in Dachentwässerungsanlagen mit Druckströmung. Ablaufgehäuse wärmegedämmtmit: SuperDrain®-Einsatz
Edelstahl-Flanschring zur Befestigung von polymeren DachdichtungsbahnenLaubfangkorbBauschutzrost
Material: Polypropylen, UV-stabilisiert
DALLMER type 62 SuperDrain® roof drainconforming to DIN EN 1253insulated drain body for use with a calculated siphonic roof drainage systemwith: SuperDrain®-insert
stainless steel clamp ring for securing single-ply membranes
domed grate temporary blanking platematerial: polypropylene, UV-stabilized
Artikel Nennweite Art. Nr. VPEDachablauf SuperDrain® 62 Schraubfl ansch DN 70 671042 1Dachablauf SuperDrain® 62 H, Schraubfl ansch, beheizt DN 70 671141 1
Dachablauf SuperDrain® 62 DallBit* DN 70 672049 1Dachablauf SuperDrain® 62 H DallBit*, beheizt DN 70 672148 1
Dachablauf SuperDrain® 62 PVC** DN 70 673046 1Dachablauf SuperDrain® 62 H PVC**, beheizt DN 70 673244 1
Aussparungsmaß/recess size: 240 x 360 mmKernbohrungsmaß/core drill: Ø 250 mm
* DallBit-Ausführung: Gehäuse mit werkseitig aufgeschweißter Bitumenschweißbahn-Manschette, Ø 500 mm, 5,0 mm stark, mit Edelstahl-Flanschring zur zusätzlichen Sicherheit** PVC-Ausführung: mit Flansch aus PVCH = beheizbare Version
* DallBit: Ø 500 mm collar of 5.0 mm thick bituminous membrane, welded to the fl ange and fi tted with stainless steel clamp ring** PVC: with PVC fl ange for welding single-ply PVC membranesH = heated
DALLMER Dachablauf SuperDrain® 62PE Plusnach DIN EN 1253Für den Einbau in Dachentwässerungsanlagen mit Druckströmung. Ablaufgehäuse wärmegedämmtAblaufstutzen aus PE, schweißbar, längskraftschlüssig angeschlossenmit: SuperDrain®-Einsatz
Edelstahl-Flanschring zur Befestigung von polymerenDachdichtungsbahnenselbstsichernder ÜberwurfmutterLaubfangkorbBauschutzrost
Material: Polypropylen, UV-stabilisiertPE (Ablaufstutzen)
DALLMER type 62 SuperDrain® roof drainPE Plusconforming to DIN EN 1253insulated drain body for use with a calculated siphonic roof drainage system
with: SuperDrain®-insertstainless steel clamp ring for securing single-ply membranes
domed grate temporary blanking platematerial: polypropylene, UV-stabilized
Artikel Nennweite Art. Nr. VPEDachablauf SuperDrain® 62 PE Plus Schraubfl ansch DN 50/DN 70 671059 1Dachablauf SuperDrain® 62 PE Plus H, Schraubfl ansch, beheizt DN 50/DN 70 671158 1
Dachablauf SuperDrain® 62 PE Plus DallBit* DN 50/DN 70 672056 1Dachablauf SuperDrain® 62 PE Plus H DallBit*, beheizt DN 50/DN 70 672155 1
Dachablauf SuperDrain® 62 PE Plus PVC** DN 50/DN 70 673053 1Dachablauf SuperDrain® 62 PE Plus H PVC**, beheizt DN 50/DN 70 673152 1
DN70
Ø160
10
0
Ø354
Ø203
Aussparungsmaß/recess size: 240 x 360 mmKernbohrungsmaß/core drill: Ø 250 mm
Balkon- und TerrassenabläufeBalcony and terrace drains
Balkonablaufgehäuse 83type 83 balcony drain
Aufsatz KEN 10grating KEN 10
Dachablauf 83 Dtype 83 D roof drain
Speziell für kleine Dächer, Balkone und Terrassen hat Dallmer die Serie 10 mit den Ablaufgehäusen 83 und 84 sowie die Sanierungsabläufe konzipiert. Alle Gehäuse gibt es wie gewohnt auch in der DallBit-Ausführung für bituminöse Ab-dichtungen. Dazu kommen verschiedene Aufsätze, u.a. auch eine Ausführung mit massivem Rost und Rahmen aus Edelstahl. Sinnvolles Zubehör, wie z. B. frostsichere Geruchsperren runden das Programm ab.
Mit den extra fl achen Gehäusen in DN 50 und DN 70 sowie dem fl exiblen Baukas-tensystem mit Aufstockelementen, Auf-sätzen und passendem Zubehör können Sie alle Aufgaben bei der Entwässerung von Terrassen, Balkonen und kleineren Dächern (z. B. bei Garagen) professionell lösen.
Dallmer has designed series 10 with compact drain bodies especially for small roofs, balconies and terraces. All bodies can be made as DallBit versions, easily bonded to bitumen or asphalt waterproofi ng.Accessories include stainless steel gratings and a non-freeze fl ap valve. A professional solution for anyone involved in terrace, balcony and small-roof (garage roofs, for example) drainage.
Planungsbeispiele P 305, P 306 / Standard details P 305, P 306
Balkonablauf 84 E type 84 E balcony drain
263
264
Ablaufgehäuse DN 50drain bodies DN 50
Ablaufgehäuse 83 KF/DN 50Art.-Nr. 830326type 83 KF drain body/DN 50part no. 830326
Ablaufgehäuse 84 KF/DN 50Art.-Nr. 831323type 84 KF drain body, DN 50part no. 831323
Ablaufgehäuse 84/DN 50Art.-Nr. 831026type 84 drain body, DN 50part no. 831026
Ablaufgehäuse 83/DN 50Art.-Nr. 830029type 83 drain body, DN 50part no. 830029
... zum Einbau in nicht abgedichtete Bodenkonstruktionen
... for use without a sheet membrane
... zum Einbau in abzudichtende Bodenkonstruktionen
... for use with a sheet membrane
Ablaufgehäuse 84 DallBit*/DN 50 Art.-Nr. 832122type 84 DallBit* drain body, DN 50 part no. 832122
Ablaufgehäuse 83 DallBit*/DN 50Art.-Nr. 832023type 83 DallBit* drain body, DN 50part no. 832023
Ablaufgehäuse 83 KF/DN 70Art.-Nr. 830340type 83 KF drain body, DN 70part no. 830340
Ablaufgehäuse DN 70drain bodies DN 70
Ablaufgehäuse 84 KF/DN 70Art.-Nr. 831347type 84 KF drain body, DN 70part no. 831347
Ablaufgehäuse 84/DN 70Art.-Nr. 831040type 84 drain body, DN 70part no. 831040
Ablaufgehäuse 83/DN 70Art.-Nr. 830043type 83 drain body, DN 70part no. 830043
Ablaufgehäuse 84 DallBit*/DN 70 Art.-Nr. 832146type 84 DallBit* drain body, DN 70 part no. 832146
Ablaufgehäuse 83 DallBit*/DN 70 Art.-Nr. 832047type 83 DallBit* drain body, DN 70 part no. 832047
Ablaufgehäuse DN 100drain bodies DN 100
Ablaufgehäuse 84/DN 100Art.-Nr. 831064type 84 drain body, DN 100part no. 831064
Ablaufgehäuse 84 DallBit*/DN 100 Art.-Nr. 832160type 84 DallBit* drain body, DN 100 part no. 832160
* DallBit-Ausführung: Gehäuse mit werkseitig aufgeschweißter Bitumenschweißbahn-Manschette, Ø 420 mm, 5,0 mm stark, mit Edelstahlfl ansch zur zusätzlichen Sicherheit
** FPO-Ausführung: Direkt verschweißbar mit FPO-Dachbahnen auf Werkstoffbasis Polypropylen* DallBit: Ø 420 mm collar of 5.0 mm thick bituminous membrane, welded to the fl ange and secured with stainless steel clamp ring** FPO: FPO-membranes based on polypropylene can be welded directly to the fl ange
... zum Einbau in nicht abgedichtete Bodenkonstruktionen
... for use without a sheet membrane
... zum Einbau in abzudichtende Bodenkonstruktionen
... for use with a sheet membrane
... zum Einbau in abzudichtende Bodenkonstruktionen
... for use with a sheet membrane
Ablaufgehäusedrain bodies
Ablaufgehäuse 84 FPO**/DN 100 Art.-Nr. 837165type 84 FPO** drain body, DN 100 part no. 837165
Ablaufgehäuse 84 FPO**/DN 50 Art.-Nr. 837127type 84 FPO** drain body, DN 50 part no. 837127
Ablaufgehäuse 83 FPO**/DN 50Art.-Nr. 837028type 83 FPO** drain body, DN 50part no. 837028
Ablaufgehäuse 84 FPO**/DN 70 Art.-Nr. 837141type 84 FPO** drain body, DN 70 part no. 837141
Ablaufgehäuse 83 FPO**/DN 70 Art.-Nr. 837042type 83 FPO** drain body, DN 70 part no. 837042
Balkonablauf-Baukastensystembalcony drains
265
Aufstock-Element 85passend zu den Balkonabläufen Serie 10Art.-Nr. 831569type 85 raising piece for use with Series 10 balcony drainspart no. 831569
Aufstock-Element 85 DallBit*passend zu den Balkonabläufen Serie 10, mit aufgeschweißter Bitumenschweißbahn-ManschetteArt.-Nr. 832566type 85 DallBit* raising piecefor use with Series 10 balcony drains, factory-fi tted bitumen collarpart no. 832566
Aufsätzegratings
Aufsatz E 10 mit Edelstahl-Rost und Rahmen aus Kunst-stoff, 100 x 100 mmArt.-Nr. 510006grating E 10 stainless steel grate and ABS frame, 100 x 100 mmpart no. 510006
Aufsatz ECN 10 Rost und Rahmen aus Edelstahl, 100 x 100 mm, Rost verschraubtArt.-Nr. 510082grating ECN 10 stainless steel grate and frame,100 x 100 mm, grate securedpart no. 510082
Aufsatz KE 10 mit Edelstahl-Rost und Rahmen aus Kunst-stoff, 150 x 150 mmArt.-Nr. 510051grating KE 10 stainless steel grate and ABS frame,150 x 150 mmpart no. 510051
Aufsatz SEN 10 Rost und Rahmen aus Edelstahl,150 x 150 mm, Rost verschraubtArt.-Nr. 510136grating SEN 10 stainless steel grate and frame, 150 x 150 mm, grate securedpart no. 510136
Aufsatz KR 10 mit zweiteiligem Kunststoffrost,150 x 150 mmArt.-Nr. 510068grating KR 10 ABS frame in two pieces, 150 x 150 mmpart no. 510068
Aufsatz ECS 10Rost und Rahmen aus Edelstahl, Rost, massiv 5 mm, verschraubt,100 x 100 mm,Art.-Nr. 510020grating ECS 10stainless steel grate and frame,grate 5 mm, 316 stainless steel, secured,100 x 100 mm, part no. 510020
Aufsatz E 12 Rost und Rahmen aus Edelstahl, 120 x 120 mmArt.-Nr. 510310grating E12stainless steel grate and frame,120 x 120 mm,part no. 510310
Aufsatz ER 12 Rost und Rahmen aus Edelstahl, Ø 120 mmArt.-Nr. 510334grating E12stainless steel grate and frame,Ø 120 mm,part no. 510334
Zubehöraccessories
Laubfang S 10, Art.-Nr. 495815dome S 10, part no. 495815
Flachrost S 10, Art.-Nr. 501240fl at grate S 10, part no. 501240
Geruchsperre S 10, Art.-Nr. 495839self-closing fl ap-valve S 10, part no. 495839
Einlaufelement/Kiesfang S 10Art.-Nr. 495822gravel guard S 10, part no. 495822
Edelstahl-Flanschring S 10, Art.-Nr. 839503clamp ring S 10, part no. 839503
... oder kombinieren Sie mit den Kunststoff-Aufsatzrahmen S 10 und den passenden Rosten... or combine a Series 10 frame with one of our other grates
Aufstock-Elementeraising pieces
Rückstaudichtung S 10, Art.-Nr. 495020type S 10 seal, part no. 495020
Anschluss-Manschette S 10, Art.-Nr. 790316 (PVC), 790323 (EPDM)type S 10 waterproofi ng collar, part no. 790316 (PVC), 790316 (EPDM)
Balkonablauf-Baukastensystembalcony drains
+
+
+
266
Ablaufgehäuse 83 KF DN 70
DN
70
Ø152
90
150
Ablaufgehäuse 83 DN 50
Ablaufgehäuse 83 DN 70
Ablaufgehäuse 83 KF DN 50
Aussparungsmaß: 180 x 270 mm
60
DN
50
Ø230 42
150D
N70
150
Ø230
85
54
DN
50
Ø152
65
150
DALLMER Balkonablaufgehäuse 83 nach DIN EN 1253Ablaufstutzen 3° abgewinkeltmit: BauschutzdeckelMaterial: Polypropylen, UV-stabilisiert
DALLMER type 83 balcony drain body conforming to DIN EN 1253outlet: side, 3°with: temporary blanking platematerial: polypropylene, UV-stabilized
DALLMER type 83 KF balcony drain bodybody without fl ange for use without a waterproofi ng membraneoutlet: side, 3°with: temporary blanking platematerial: polypropylene, UV-stabilized
DALLMER Balkonablaufgehäuse 83 KFGehäuse ohne Flansch zum Einbau in nicht abgedichtete BodenkonstruktionenAblaufstutzen 3° abgewinkeltmit: BauschutzdeckelMaterial: Polypropylen, UV-stabilisiert
* DallBit-Ausführung: Gehäuse mit werkseitig aufgeschweißter Bitumenschweißbahn-Manschette, Ø 420 mm, 5,0 mm stark, mit Edelstahl-Flanschring zur zusätzlichen Sicherheit
* DallBit: Ø 420 mm collar of 5.0 mm thick bituminous membrane, welded to the fl ange and fi tted with stainless steel clamp ring
Artikel Nennweite Art. Nr. VPEAblaufgehäuse 83 DN 50 830029 5Ablaufgehäuse 83 DN 70 830043 5
Ablaufgehäuse 83 DallBit* DN 50 832023 10Ablaufgehäuse 83 DallBit* DN 70 832047 10
Artikel Nennweite Art. Nr. VPEAblaufgehäuse 83 KF DN 50 830326 10Ablaufgehäuse 83 KF DN 70 830340 10
DALLMER type 83 FPO balcony drain body with extra-wide fl ange for installation with FPO membranesoutlet: side, 3°with: temporary blanking platematerial: polypropylene, UV-stabilized
DALLMER Balkonablaufgehäuse 83 FPOmit extra breitem Flansch zum Anschluss von FPO-DachbahnenAblaufstutzen 3° abgewinkeltmit: BauschutzdeckelMaterial: Polypropylen, UV-stabilisiert
Artikel Nennweite Art. Nr. VPEAblaufgehäuse 83 FPO ** DN 50 837028 1Ablaufgehäuse 83 FPO ** DN 70 837042 1
Ablaufl eistungen nach DIN EN 1253Norm DALLMER
DN 50 0,9 l/s 5,79 l/sDN 70 1,7 l/s 6,14 l/s
Flow rate tested to DIN EN 1253Required DALLMER
DN 50 0.9 l/s 5.79 l/sDN 70 1.7 l/s 6.14 l/s
Ablaufl eistungen nach DIN EN 1253Norm DALLMER
DN 50 0,9 l/s 5,79 l/sDN 70 1,7 l/s 6,14 l/s
Flow rate tested to DIN EN 1253Required DALLMER
DN 50 0.9 l/s 5.79 l/sDN 70 1.7 l/s 6.14 l/s
Ablaufl eistungen nach DIN EN 1253Norm DALLMER
DN 50 0,9 l/s 5,79 l/sDN 70 1,7 l/s 6,17 l/s
Flow rate tested to DIN EN 1253Required DALLMER
DN 50 0.9 l/s 5.79 l/sDN 70 1.7 l/s 6.17 l/s
** FPO-Ausführung: Direkt verschweißbar mit FPO-Dachbahnen auf Werkstoffbasis Polypropylen
** FPO: FPO-membranes based on polypropylene can be welded directly to the fl ange
Balkonablaufgehäusebalcony drain bodies
267
Balkonablaufgehäusebalcony drain bodies
Ablaufgehäuse 84 KF DN 50
Ablaufgehäuse 84
Aussparungsmaß: Ø 180 mm
Ablaufgehäuse 84 KF DN 70
20
0
DN
21
6
Ø230
Ø152
21
5
20
0
DN50
21
5
DN70
Ø152
20
0
* DallBit-Ausführung: Gehäuse mit werkseitig aufgeschweißter Bitumenschweißbahn-Manschette, Ø 420 mm, 5,0 mm stark, mit Edelstahl-Flanschring zur zusätzlichen Sicherheit
* DallBit: Ø 420 mm collar of 5.0 mm thick bituminous membrane, welded to the fl ange and fi tted with stainless steel clamp ring
DALLMER Balkonablaufgehäuse 84 nach DIN EN 1253Ablaufstutzen senkrechtmit BauschutzdeckelMaterial: Polypropylen, UV-stabilisiert
DALLMER type 84 balcony drain bodyconforming to DIN EN 1253outlet: verticalwith: temporary blanking platematerial: polypropylene, UV-stabilized
DALLMER Balkonablaufgehäuse 84 KFGehäuse ohne Flansch zum Einbau in nicht abgedichtete BodenkonstruktionenAblaufstutzen senkrechtmit BauschutzdeckelMaterial: Polypropylen, UV-stabilisiert
DALLMER type 84 KF balcony drain bodybody without fl ange for use without a waterproofi ng membraneoutlet: verticalwith: temporary blanking platematerial: polypropylene, UV-stabilized
Artikel Nennweite Art. Nr. VPEAblaufgehäuse 84 DN 50 831026 5Ablaufgehäuse 84 DN 70 831040 5Ablaufgehäuse 84 DN 100 831064 5
Ablaufgehäuse 84 DallBit* DN 50 832122 1Ablaufgehäuse 84 DallBit* DN 70 832146 1Ablaufgehäuse 84 DallBit* DN 100 832160 1
Artikel Nennweite Art. Nr. VPEAblaufgehäuse 84 KF DN 50 831323 5Ablaufgehäuse 84 KF DN 70 831347 5
DALLMER type 84 FPO balcony drain body with extra-wide fl ange for installation with FPO membranesoutlet: verticalwith: temporary blanking platematerial: polypropylene, UV-stabilized
DALLMER Balkonablaufgehäuse 84 FPOmit extra breitem Flansch zum Anschluss von FPO-DachbahnenAblaufstutzen senkrechtmit: BauschutzdeckelMaterial: Polypropylen, UV-stabilisiert
Artikel Nennweite Art. Nr. VPEAblaufgehäuse 84 FPO ** DN 50 837127 1Ablaufgehäuse 84 FPO ** DN 70 837141 1Ablaufgehäuse 84 FPO ** DN 100 837165 1
Ablaufl eistungen nach DIN EN 1253Norm DALLMER
DN 50 0,9 l/s 5,79 l/sDN 70 1,7 l/s 6,14 l/sDN 100 4,5 l/s 5,62 l/s
Flow rate tested to DIN EN 1253Required DALLMER
DN 50 0.9 l/s 5.79 l/sDN 70 1.7 l/s 6.14 l/sDN 100 4.5 l/s 5.62 l/s
Ablaufl eistungen nach DIN EN 1253Norm DALLMER
DN 50 0,9 l/s 5,79 l/sDN 70 1,7 l/s 6,14 l/sDN 100 4,5 l/s 5,62 l/s
Flow rate tested to DIN EN 1253Required DALLMER
DN 50 0.9 l/s 5.79 l/sDN 70 1.7 l/s 6.14 l/sDN 100 4.5 l/s 5.62 l/s
Ablaufl eistungen nach DIN EN 1253Norm DALLMER
DN 50 0,9 l/s 5,79 l/sDN 70 1,7 l/s 5,1 l/sDN 100 4,5 l/s 6,5 l/s
Flow rate tested to DIN EN 1253Required DALLMER
DN 50 0.9 l/s 5.79 l/sDN 70 1.7 l/s 5.1 l/sDN 100 4.5 l/s 6.5 l/s
** FPO-Ausführung: Direkt verschweißbar mit FPO-Dachbahnen auf Werkstoffbasis Polypropylen
** FPO: FPO-membranes based on polypropylene can be welded directly to the fl ange
268
Ø110
100
7,5 1
4
15
-10
7
100
Ø110
7 14
15
-10
7
7
100
Ø110
14
15
-10
7
Ø110
150
14 14
16
-11
4
Ø110
14
14
-111
9
150
DALLMER type E 10, EN 10 gratingused with balcony drain types 83, 84 and raising piece 85spigot: polypropylene, extendable with
DN 100 plastic pipe frame: ABS, 100 x 100 mmgrate: 304 stainless steel, class K 3EN 10: grate secured
DALLMER type EC 10, ECN 10 gratingused with balcony drain types 83, 84 and raising piece 85spigot: polypropylene, extendable with
DN 100 plastic pipeframe: 304 stainless steel, 100 x 100 mmgrate: 304 stainless steel, class K 3ECN 10: grate secured
DALLMER type KE 10, KEN 10 gratingused with balcony drain types 83, 84 and raising piece 85spigot: polypropylene, extendable with
DN 100 plastic pipeframe: ABS, 150 x 150 mmgrate: 304 stainless steel, class K 3KEN 10: grate secured
DALLMER type SEC 10, SEN 10, SES 10 gratingused with balcony drain types 83, 84 and raising piece 85spigot: polypropylene, extendable with
DN 100 plastic pipe frame: 304 stainless steel, 150 x 150 mmSEC 10: grate 304 stainless steel, class K 3SEN 10: grate 304 stainless steel, secured,
class K 3SES 10: grate 5 mm 316 stainless steel,
secured, class L 15
DALLMER Aufsatz E 10, EN 10passend zu den Balkonabläufen 83 und 84 sowie zum Aufstockelement 85 Aufsatzverlängerung Polypropylen, verlängerbar mit HT-Rohr DN 100Rahmen: ABS, 100 x 100 mmRost: Edelstahl 1.4301, Klasse K 3EN 10: Rost verschraubt
DALLMER Aufsatz EC 10, ECN 10passend zu den Balkonabläufen 83 und 84 sowie zum Aufstockelement 85 Aufsatzverlängerung Polypropylen,verlängerbar mit HT-Rohr DN 100Rahmen: Edelstahl 1.4301, 100 x 100 mmRost: Edelstahl 1.4301, Klasse K 3ECN 10: Rost verschraubt
DALLMER Aufsatz KE 10, KEN 10passend zu den Balkonabläufen 83 und 84 sowie zum Aufstockelement 85 Aufsatzverlängerung Polypropylen,verlängerbar mit HT-Rohr DN 100Rahmen: ABS, 150 x 150 mmRost: Edelstahl 1.4301, Klasse K 3KEN 10: Rost verschraubt
DALLMER Aufsatz SEC 10, SEN 10, SES 10passend zu den Balkonabläufen 83 und 84 sowie zum Aufstockelement 85 Aufsatzverlängerung Polypropylen,verlängerbar mit HT-Rohr DN 100Rahmen: Edelstahl 1.4301, 150 x 150 mmSEC 10: Rost Edelstahl 1.4301, Klasse K 3SEN 10: Rost verschraubt, Edelstahl 1.4301, Klasse K 3SES 10: Rost verschraubt, Edelstahl 1.4404, massiv 5 mm, Klasse L 15
DALLMER Aufsatz ECS 10passend zu den Balkonabläufen 83 und 84 sowie zum Aufstockelement 85 Aufsatzverlängerung: Polypropylen,verlängerbar mit HT-Rohr DN 100Rahmen: Edelstahl 1.4301, 100 x 100 mmRost: Edelstahl 1.4404, massiv 5 mm,
verschraubt, Klasse L 15
DALLMER type ECS 10 gratingused with balcony drain types 83, 84 and raising piece 85spigot: polypropylene, extendable with
DN 100 plastic pipe frame: 304 stainless steel, 100 x 100 mmgrate: 5 mm 316 stainless steel, secured,
class L 15
Artikel Abmessungen Art. Nr. VPEAufsatz E 10 100 x 100 mm 510006 1Aufsatz EN 10 100 x 100 mm 510044 1
Artikel Abmessungen Art. Nr. VPEAufsatz EC 10 100 x 100 mm 510013 1Aufsatz ECN 10 100 x 100 mm 510082 1
Artikel Abmessungen Art. Nr. VPEAufsatz ECS 10 100 x 100 mm 510020 1
Artikel Abmessungen Art. Nr. VPEAufsatz KE 10 150 x 150 mm 510051 1Aufsatz KEN 10 150 x 150 mm 510099 1
Artikel Abmessungen Art. Nr. VPEAufsatz SEC10 150 x 150 mm 510105 1Aufsatz SEN 10 150 x 150 mm 510136 1Aufsatz SES 10 150 x 150 mm 510143 1
Aufsätzegratings
269
Aufsätzegratings
120
Ø110
14
10
-10
5,5
6,2
Ø120
Ø110
14
10
-10
5,5
6,2
DALLMER type KR 10 gratingused with balcony drain types 83, 84 and raising piece 85with insert for plastic down pipes 50 - 75 mmspigot: polypropylene, extendable with
DN 100 plastic pipeframe: polypropylene, 150 x 150 mmgrate: polypropylene
DALLMER Aufsatz KR 10 passend zu den Balkonabläufen 83 und 84sowie zum Aufstockelement 85 Aufsatzverlängerung aus Polypropylen, verlängerbar mit HT-Rohr DN 100zweiteilig mit Fallrohreinsatzfür Fallrohr 50-75 mmRahmen: Polypropylen, 150 x 150 mmRost: Polypropylen
DALLMER Aufsatz E 12, EN 12passend zu den Balkonabläufen 83 und 84sowie zum Aufstockelement 85 Aufsatzverlängerung: ABS, verlängerbar mit HT-Rohr DN 100Rahmen: Edelstahl 1.4301, 120 x 120 mmRost: Edelstahl 1.4301, Klasse K 3EN 12: Rost verschraubt
DALLMER type E 12, EN 12 gratingsused with balcony drain types 83, 84 and raising piece 85spigot: ABS, extendable with
DN 100 plastic pipeframe: 304 stainless steel, 120 x 120 mmgrate: 304 stainless steel, class K 3EN 12: grate secured
DALLMER Aufsatz ER 12passend zu den Balkonabläufen 83 und 84sowie zum Aufstockelement 85 Aufsatzverlängerung: ABS, verlängerbar mit HT-Rohr DN 100Rahmen: Edelstahl 1.4301, Ø 120 mmRost: Edelstahl 1.4301, Klasse K 3
DALLMER type 12 gratingused with balcony drain types 83, 84 and raising piece 85spigot: ABS, extendable with
DN 100 plastic pipeframe: 304 stainless steel, Ø 120 mmgrate: 304 stainless steel, class K 3
Maßesize
höhenverstellbarheight adjustment
Einstecktiefeinsert depth
Artikel Abmessungen Art. Nr. VPEAufsatz KR 10 150 x 150 mm 510068 1
Artikel Abmessungen Art. Nr. VPEAufsatz E 12 120 x 120 mm 510310 1Aufsatz EN 12 120 x 120 mm 510327 1
Artikel Abmessungen Art. Nr. VPEAufsatz ER 12 Ø 120 mm 510334 1
270
DALLMER Balkonablauf 83 E nach DIN EN 1253Ablaufstutzen 3° abgewinkeltmit: Bauschutzdeckel
Aufsatzverlängerung verlängerbar mit HT-Rohr DN 100,
Rahmen: ABS, 100 x 100 mm Rost: Edelstahl 1.4301, Klasse K 3Material: Polypropylen, UV-stabilisiert
DALLMER Balkonablauf 84 E nach DIN EN 1253Ablaufstutzen senkrechtmit: Bauschutzdeckel
Aufsatzverlängerung verlängerbar mit HT-Rohr DN 100
Rahmen: ABS, 100 x 100 mmRost: Edelstahl 1.4301, Klasse K 3Material: Polypropylen, UV-stabilisiert
DALLMER type 83 E balcony drainconforming to DIN EN 1253outlet: side, 3°with: temporary blanking plate spigot extendable with DN 100
plasic pipe, frame: ABS, 100 x 100 mmgrate: 304 stainless steel, class K 3material: polypropylene, UV-stabilized
DALLMER type 84 E balcony drainconforming to DIN EN 1253outlet: verticalwith: temporary blanking plate spigot extendable with DN 100
plasic pipeframe: ABS, 100 x 100 mmgrate: 304 stainless steel, class K 3material: polypropylene, UV-stabilized
Artikel Nennweite Art. Nr. VPEBalkonablauf 83 E DN 50 830104 1Balkonablauf 83 E DN 70 830111 1
Artikel Nennweite Art. Nr. VPEBalkonablauf 84 E DN 50 831101 1Balkonablauf 84 E DN 70 831118 1
Komplette Balkonabläufecomplete balcony drains
Ablaufl eistungen nach DIN EN 1253Norm DALLMER
DN 50 0,9 l/s 5,79 l/sDN 70 1,7 l/s 6,14 l/s
Flow rate tested to DIN EN 1253Required DALLMER
DN 50 0.9 l/s 5.79 l/sDN 70 1.7 l/s 6.14 l/s
Ablaufl eistungen nach DIN EN 1253Norm DALLMER
DN 50 0,9 l/s 5,79 l/sDN 70 1,7 l/s 6,14 l/s
Flow rate tested to DIN EN 1253Required DALLMER
DN 50 0.9 l/s 5.79 l/sDN 70 1.7 l/s 6.14 l/s
NEU!
NEU!
Ø230
100
15-1
07
Ø230
100
15-1
07
Balkonablauf 83 E DN 50
Balkonablauf 83 E DN 70
Ø230
50
100
15-1
07
Ø230
70
100
15-1
07
Balkonablauf 84 E DN 70
Balkonablauf 84 E DN 50
271
Dachablauf 83 D DN 50
Dachablauf 84 D DN 50
Dachablauf 83 D DN 70
Aussparungsmaß: 180 x 270 mm
Aussparungsmaß: 180 x 250 mmKernbohrungsmaß: je nach Nennweite
Dachablauf 84 D DN 70
Dachablauf 84 D DN 100
DN
50
Ø230
150
42
60
DN
70
150
54
85
Ø230
DN50
20
0
Ø230
21
6
20
0
DN70
Ø230
21
6
DN100
20
0
21
6
Ø230
Komplette Dachabläufecomplete roof drains
DALLMER Dachablauf 83 D nach DIN EN 1253Ablaufstutzen 3° abgewinkeltmit: Edelstahl-Flanschring zur
Befestigung von polymeren DachdichtungsbahnenLaubfangkorbBauschutzdeckel
Material: Polypropylen, UV-stabilisiert
DALLMER Dachablauf 84 D nach DIN EN 1253Ablaufstutzen senkrechtmit: Edelstahl-Flanschring zur
Befestigung von polymeren DachdichtungsbahnenLaubfangkorbBauschutzdeckel
Material: Polypropylen, UV-stabilisiert
DALLMER type 83 D roof drainconforming to DIN EN 1253outlet: side, 3°with: stainless steel clamp ring for securing
single-ply membranes domed grating temporary blanking platematerial: polypropylene, UV-stabilized
DALLMER type 84 D roof drainconforming to DIN EN 1253outlet: verticalwith: stainless steel clamp ring for securing
single-ply membranes domed grating temporary blanking platematerial: polypropylene, UV-stabilized
* DallBit-Ausführung: Gehäuse mit werkseitig aufgeschweißter Bitumenschweißbahn-Manschette, Ø 420 mm, 5,0 mm stark, mit Edelstahl-Flanschring zur zusätzlichen Sicherheit
* DallBit: Ø 420 mm collar of 5.0 mm thick bituminous membrane, welded to the fl ange and fi tted with stainless steel clamp ring
Artikel Nennweite Art. Nr. VPEDachablauf 83 D Schraubfl ansch DN 50 830623 1Dachablauf 83 D Schraubfl ansch DN 70 830647 1
Dachablauf 83 D DallBit* DN 50 832627 1Dachablauf 83 D DallBit* DN 70 832641 1
Artikel Nennweite Art. Nr. VPEDachablauf 84 D Schraubfl ansch DN 50 831620 1Dachablauf 84 D Schraubfl ansch DN 70 831644 1Dachablauf 84 D Schraubfl ansch DN 100 831668 1
Dachablauf 84 D DallBit* DN 50 832726 1Dachablauf 84 D DallBit* DN 70 832740 1Dachablauf 84 D DallBit* DN 100 832764 1
Ablaufl eistungen nach DIN EN 1253Norm DALLMER
DN 50 0,9 l/s 5,79 l/sDN 70 1,7 l/s 6,14 l/sDN 100 4,5 l/s 5,62 l/s
Flow rate tested to DIN EN 1253Required DALLMER
DN 50 0.9 l/s 5.79 l/sDN 70 1.7 l/s 6.14 l/sDN 100 4.5 l/s 5.62 l/s
Ablaufl eistungen nach DIN EN 1253Norm DALLMER
DN 50 0,9 l/s 5,79 l/sDN 70 1,7 l/s 6,14 l/s
Flow rate tested to DIN EN 1253Required DALLMER
DN 50 0.9 l/s 5.79 l/sDN 70 1.7 l/s 6.14 l/s
272
Ø92 42
Ø110
Ø120
12 Ø110
Ø120
2
Ø140
Ø211,5
DALLMER Edelstahl-Flanschring S 10mit Edelstahl-Schrauben und Dichtung
DALLMER type S 10 clamp ringstainless steel with rubber seal and screws
DALLMER Geruch- und SchaumsperreS 10 und S 10/S 12zum Einbau in die Aufsatzrahmen derBalkonabläufeDie mechanisch wirkende Sperre verhindert den Austritt von Kanalgasen und Schaum.mit: DichtungMaterial: ABSFrostfest, da ohne Wasser!
S 10für Aufsätze 100 x 100 mm
S 10/12für Aufsätze 120 x 120 mm
DALLMER type S 10 and S 10/S 12 self-closing fl ap-valvefi tted in the frame of a balcony drainUsed on combined foul and rainwater systems, the fl ap-valve allows water to drain whilst preventing the escape of foul air and scum.with: sealmaterial: ABSWith no water seal, it cannot freeze
S 10for gratings 100 x 100 mm
S 10/12for gratings 120 x 120 mm
DALLMER Rückstaudichtung S 10passend zu den Balkonabläufen 83, 84 und Aufstockelement 85
DALLMER type S 10 sealused with balcony drain types 83, 84 and type 85 raising piecerubber
Artikel Abmessungen Art. Nr. VPEGeruchsperre S 10 Ø 92 mm 495839 10Geruchsperre S 10/12 Ø 108,5 mm 495846 10
Der Einsatz der Geruchsperre bei Balkon-abläufen DN 70 und DN 100 senkt die Ablaufl eistung unter Normvorgabe.
Utilisation of fl ap-valves in balcony drains DN 70 and DN 100 decreases the fl ow to under the rate tested to DIN EN 1253.
Artikel Abmessungen Art. Nr. VPERückstaudichtung S 10 Ø 110 mm 495020 1
Artikel Art. Nr. VPEEdelstahl-Flanschring S 10 839503 5
Geruch- und Schaumsperre S 10
Geruch- und Schaumsperre S 10/S 12
Ø108,5
59
Zubehöraccessories
273
Zubehöraccessories
57
78
Ø104
140
Ø132
Ø110
Ø132
57
Ø230
21
9
20
3
DALLMER Aufstockelement 85 passend zu den Balkonabläufen 83 und 84verlängerbar mit Kunststoffrohr DN 100mit: Einsteckmuffe mit Rückstaudichtung
BauschutzrostMaterial: Polypropylen, UV-stabilisiert
DALLMER type 85 raising pieceused with balcony drain types 83, 84cut to suit on site extended with DN 100 plastic pipewith: socket with seal temporary blanking platematerial: polypropylene, UV-stabilized
* DallBit-Ausführung: Gehäuse mit werkseitig aufgeschweißter Bitumenschweißbahn-Manschette, Ø 420 mm, 5,0 mm stark, mit Edelstahl-Flanschring zur zusätzlichen Sicherheit
* DallBit: Ø 420 mm collar of 5.0 mm thick bituminous membrane, welded to the fl ange and fi tted with stainless steel clamp ring
Artikel Art. Nr. VPEAufstockelement 85 831569 5Aufstockelement 85 DallBit* 832566 1
Einsteckmuffe 85 495877 1
DALLMER Einlaufelement/Kiesfang S 10passend zu den Balkonabläufen 83 und 84sowie den Aufstockelementen 85Das Element wird zur Entwässerung von wasser-durchlässigen Plattenbelägen auf Terrassen o.ä. zwischen Aufsatzrahmen und Ablauf eingebaut.Material: Polypropylen, UV-stabilisiert
DALLMER Kies- und Laubfangkorb S 10passend zu den Balkonabläufen 83 und 84sowie den Aufstockelementen 85Material: Polypropylen, UV-stabilisiert
DALLMER Flachrost S 10passend zu den Balkonabläufen 83 und 84sowie den Aufstockelementen 85Material: Polypropylen, hochschlagfest
DALLMER type S 10 perforated collar/gravel guardused with balcony drain types 83, 84and raising piece 85fi tted between the drain body and grating, it allows water passing through a pavedterrace to drain from the membrane levelmaterial: polypropylene, UV-stabilized
DALLMER type S 10 domed grating/gravel guardused with balcony drain types 83, 84 and raising piece 85material: polypropylene, UV-stabilized
DALLMER type S 10 fl at grateused with balcony drain types 83, 84 and raising piece 85material: polypropylene
Artikel Abmessungen Art. Nr. VPEEinlaufelement/Kiesfang S 10 Ø 103 mm 495822 1
Artikel Abmessungen Art. Nr. VPEKies- und Laubfangkorb S 10 Ø 125 mm 495815 1
Nur in Verbindung mit Flanschring S 10 einsetz-bar (Art. Nr. 839503)
Must be used with S 10 clamp ring (part no. 839503)
Artikel Abmessungen Art. Nr. VPEFlachrost S 10 Ø 113 mm 501240 1
23
Ø103
Ø125
75
Ø113
16
,5
274
420
DALLMER Anschluss-Manschette S 10 aus hochpolymeren Dichtungsbahnen, passend zu den Balkonabläufen 83 und 84 sowie den Aufstockelementen 85
DALLMER type S 10 waterproofi ng collarcut from single-ply membrane materialused with balcony drain types 83, 84and raising piece 85
Artikel Abmessungen Art. Nr. VPEAnschluss-Manschette S 10, PVC-weich Ø 420 mm 790316 30Anschluss-Manschette S 10, EPDM Ø 420 mm 790323 30
Anschluss-Manschetten aus anderen Dichtungs-bahnen auf Anfrage
Other material on request
Zubehöraccessories
DALLMER Distanzring FPO S 10passend zu den Ablaufgehäusen 83 FPO und 84 FPOmit Schrauben
DALLMER type FPO S 10 spacerused with balcony drain body 83 FPO and 84 FPOwith screws
Artikel Abmessungen Art. Nr. VPEDistanzring FPO S 10 Ø 208 mm 495198 1
DALLMER PVC-Flansch S 10passend zu den Ablaufgehäusen 83 FPO und 84 FPOmit Schrauben
DALLMER type PVC S 10 fl angeused with balcony drain body 83 FPO and 84 FPOwith screws
Artikel Abmessungen Art. Nr. VPEPVC-Flansch S 10 Ø 308 mm 495853 1