Dual Ramp Timer 24hr. LED Dawn/Dusk/Lunar Light Controller

Quick Installation Process

Wireless IR Remote

Dual Ramp Timer withTwo LED Strips

Dual Ramp Timer to Single LED

LED Light

LED Light

12-24VDCTransformer

12-24VDCTransformer

IR Sensor

Quick Installation GuideConnecting the Dual Ramp Timer to your LED light(s)

1. Connect your 12-24VDC transformer to the female DC plug on the timer.

2. Connect your LED light(s) to the male DC plugs on the timer. Blue light channel (dawn/dusk/moonlight) connects to Line 1. White light channel (daylight) connects to Line 2 (refer to tags on controller cable).

3. Remove plastic cover from wireless remote and remove clear plastic tablocated at the bottom of the remote.

4. Locate a dry location not near water or salt creep. Clean area thoroughly.

5. Use velcro included to mount Dual Ramp Timer to mounting location.

Note: Ramp Timer Pro and remote are NOT waterproof. Ensure neitherare located in a location of splashing water or salt creep.

Strip with 2 Channels

Page 1

Ch1 Time

Ch2 Time

Main on/offResume programming

Sets 24hr. clock

Controls line 1

Controls line 2

Main adjustment

Program on/off

Intensity adjust

Manual color adjustment

Programming Using the Wireless IR Remote

HOUR MINUTE

SET CLOCK

Ch1 Time

Ch2 Time

Quick Installation Guide Continued

Step 1: Setting the clock

Step 2: Setting On/off times

HOUR MINUTE

HOUR MINUTE

Ch2 Time

Ch1 Time

Step 3: Setting Minimum and Maximum Intensity

HOUR MINUTE

HOUR MINUTE

Page 2

Programming Using the Controller Keypad

Enter

Setting the clock

Enter

Setting the “ON” time for channel 2

Manual Color Adjustment

’

RESUME

Moonlighting

Recommended Lighting Schedules

Page 4