2441th quick start guide · 2015. 8. 13. · 2 remove your old thermostat. some are secured with...
TRANSCRIPT
INSTEON Thermostat2441TH Quick Start GuideGuide de départ rapide
Phillips ScrewdriverTournevis Phillips
Small Phillips ScrewdriverPetit tournevis Phillips
Small Flathead ScrewdriverPetit tournevis à tête plate
Tools Needed for InstallationOutils requis pour l’installation
Disconnect PowerCoupez l’alimentation
Always disconnect power before installation. Contact INSTEON Support when uncertain about installation.Coupez toujours l’alimentation avant de procéder à l’installation. Communiquez avec le soutien technique d’INSTEON si vous avez des doutes sur l’installation.
1-866-243-8022
NEW
X
InstallationInstallation
ON
ON
ON
ON
ON
ON
ON
OFF
ON ON
Circuit BreakersDisjoncteurs
Power is OFFL’alimentation est HORS TENSION
Fuse PanelTableau des fusibles
or
1 Turn off power to your air conditioning system at the electrical service panel.Coupez l’alimentation du climatiseur sur le panneau électrique.
Power is ONL’alimentation est SOUS TENSION
2 Remove your old thermostat. Some are secured with screws, others tilt upwards.Retirez votre ancien thermostat. Certains modèles sont vissés, d’autres basculent vers le haut.
W1/O/BW2
M1SC1
RS2M1SC3
RS+5
RS1RS GND
Y1
GM1SC2
CK1
CK GND
RC
3 Verify that the INSTEON Thermostat will work with your air conditioning system. Heat pump and line voltage systems are incompatible.Vérifiez si le thermostat INSTEON fonctionne avec votre système de climatisation. Les pompes à chaleur et les systèmes de chauffage à tension de secteur sont incompatibles.
W1/O/BW2
M1SC1
RS2M1SC3
RS+5
RS1RS GND
Y1
GM1SC2
CK1
CK GND
RC
X
4 Take a picture of your wiring and label the wires using the included labels. When ready, remove the old thermostat’s mounting plate.Prenez une photo de votre câblage et étiquetez les câbles à l’aide des étiquettes incluses. Lorsque vous êtes prêts, retirez la plaque de montage de l’ancien thermostat.
W1/O/BW2
M1SC1
RS2M1SC3
RS+5
RS1RS GND
Y1
GM1SC2
CK1
CK GND
RC
W1/O/BW2
M1SC1
RS2M1SC3
RS+5
RS1RS GND
Y1
GM1SC2
CK1
CK GND
RC
5 Mount the INSTEON Thermostat and connect the wires to the corresponding wire terminals.Installez le thermostat INETSON et raccordez les câbles aux bornes de connexion correspondantes.
Wire color may varyLa couleur des câbles peut varier.
Y1
Y2
24COM24R
W1
W2
G
Y1
Y2
24COM24R
W1
W2
G
Y1
Y2
24COM24R
W1
W2
G
Y1
Y2
24COM24R
W1
W2
G
Y1
Y2
24COM24R
W1
W2
G
Y1
Y2
24COM24R
W1
W2
G
With the Hub, follow the instructions below to change the temperature mode of your thermostat.Avec le Hub, suivez les instructions ci-dessous pour changer le mode de température de votre thermostat.
Use ºF or ºCUtilisez °F ou °C
Linking complete. You can now control your Thermostat from the App.Liaison est terminée. Vous pouvez maintenant contrôler votre thermostat à partir de l’App.
NEW
X
PROGRAM
PROGRAM
PROGRAM
PROGRAM
Thermostat
Name
Icon
Room Memberships
Humidity Sensor
Units ºFºF
ºC