224 54,5 - psndealer.compsndealer.com/dealersite/images/newvehicles/2015/nv1011752_1.pdf ·...
TRANSCRIPT
20 m
224 kW
54,5 tCrawler material handling machine
TIER IVf
Further developed. The E-Series.
Your most important advantages:
Green Effi ciencySave fuel - lower operating costsCalm work - easy on the operator and on the environment
Performance at the highest level Robust mechanical engineering - parts subject to load are optimized High speeds - high safe working loads
Maximum operating comfortMaxcab comfort cab - relaxed workSENCON - SENNEBOGEN Control System
Maximum safetySafe entry and exit - non-slip step surfaces Modern cameras - the entire work area is in view
Maintenance and service made easyEasy fault diagnosis - central measuring pointsEasy maintenance - clear markings
Consultation and support3 production locations - 2 subsidiaries120 Sales Partners - more than 300 service support points
elevated operator cab
The characteristics of the E-Series
60 years of experience in the design and construc-tion of hydraulic material handling machines
Uncompromising high-performance in all areas: Focus on material handling
Technology that can be mastered: High-quality components and avoidance of over-engineering
Long product service life and high value retention
Further developed. The E-Series.
Your most important advantages:
Green Effi ciencySave fuel - lower operating costsCalm work - easy on the operator and on the environment
Performance at the highest levelRobust mechanical engineering - parts subject to load are optimizedHigh speeds - high safe working loads
Maximum operating comfortMaxcab comfort cab - relaxed workSENCON - SENNEBOGEN Control System
Maximum safetySafe entry and exit - non-slip step surfacesModern cameras - the entire work area is in view
Maintenance and service made easyEasy fault diagnosis - central measuring pointsEasy maintenance - clear markings
Consultation and support3 production locations - 2 subsidiaries120 Sales Partners - more than 300 service support points
elevated operator cab
The characteristics of the E-Series
60 years of experience in the design and construc-tion of hydraulic material handling machines
Uncompromising high-performance in all areas:Focus on material handling
Technology that can be mastered: High-qualitycomponents and avoidance of over-engineering
Long product service life and high value retention
3*Up to 25% depending on work implementation as compared to the D-Series preliminary picture with mobile undercarriage 3*Up to 25% depending on work implementation as compared to the D-Series preliminary picture with mobile undercarriage
The E-Series. At a glance.
Constant, reliable performance due to large-dimensioned and highly-resistant fans and coolers
Water coolers and oil coolers with optimal effi ciency thanks to control via axial piston pump and motor thermostatic regulation on-demand
Charge air cooler with mechanical drive
Up to 20% savings: Working in Eco Mode with reduced speedIdle automation lowers RPM to 40% of working RPMStop automation switches the engine off , when there is no demand for powerOptimized engine settings, specifi c fuel consumption lowered, modern exhaust gas aftertreatment
Save fuel 4 times
Uniformly quiet working machine, thanks to decoupled engine suspension and acoustic insulationmats in the doors
Sound pressure level reduced by as much as 4.5 dB; sound power level in accordance with 2000/14/EC as much as 2 dB lower than required
The E-Series. At a glance.
Constant, reliable performance due to large-dimensioned and highly-resistant fans and coolersWater coolers and oil coolers with optimal effi ciencythanks to control via axial piston pump and motor thermostatic regulation on-demandCharge air cooler with mechanical drive
Up to 20% savings: Working in Eco Modewith reduced speedIdle automation lowers RPM to 40% ofworking RPMStop automation switches the engine off ,when there is no demand for powerOptimized engine settings, specifi c fuelconsumption lowered, modern exhaust gasaftertreatment
Save fuel 4 times
Uniformly quiet working machine, thanksto decoupled engine suspension and acousticinsulationmats in the doorsSound pressure level reduced by as much as 4.5 dB;sound power level in accordance with 2000/14/EC as much as 2 dB lower than required
5
Strong pumps with power reserves Highest levels of effi ciency thanks to large-dimensioned hydraulic valves and lines
Extremely long change intervals of 4,000 op.hrs through initial fi lling with HVLPD oil with extended oil service life when used with SENNEBOGEN HydroClean*
Standard equipment: Automatic, fast and strong fan reversal for blowing out the coolers and continuous cooling capacity
Side-by-side coolers, easily accessible and clean cooler technology
Fuel savings through optimized fan operation
Non-slip work surfaces Perimeter railing (optional) 2 cameras to the right and to the rear Step grid with railing sliding
door of the cab
Maximum safety
* Option, see page 7
preliminary picture with mobile undercarriage
5
Strong pumps with power reservesHighest levels of effi ciency thanks to large-dimensioned hydraulic valves and linesExtremely long change intervals of 4,000 op.hrsthrough initial fi lling with HVLPD oil with extended oilservice life when used with SENNEBOGEN HydroClean*
Standard equipment: Automatic, fast and strong fanreversal for blowing out the coolers and continuouscooling capacitySide-by-side coolers, easily accessible and cleancooler technologyFuel savings through optimized fan operation
Non-slip work surfaces Perimeter railing (optional) 2 cameras to the right and to the rear Step grid with railing sliding
door of the cab
Maximum safety
* Option, see page 7
preliminary picture with mobile undercarriage
The E-Series. Comfort pure.
Clear menu Determine actual values without additional measurement devices
Fast troubleshooting thanks to detailed messages
Work climate is always pleasant, thanks to 10 uniformly distributed fan nozzles
Easy control via central operating elements
Safety when entering and exiting the cab
Sliding door facilitates entering and exiting
Air-suspension comfort seat, with seat heater
Convenient joystick control, Hinged front window Sliding door, step grid in front of cab Color monitor for camera images to the right and to the rear
SENNEBOGEN Optimode:Diff erent modes for optimization of performance
Comfort cab Maxcab
The E-Series. Comfort pure.
Clear menuDetermine actual values withoutadditional measurement devicesFast troubleshooting thanks todetailed messages
Work climate is alwayspleasant, thanks to 10uniformly distributed fannozzlesEasy control via centraloperating elements
Safety when entering andexiting the cabSliding door facilitatesentering and exiting
Air-suspension comfort seat, withseat heaterConvenient joystick control,Hinged front windowSliding door, step grid in front of cabColor monitor for camera images tothe right and to the rearSENNEBOGEN Optimode:Diff erent modes for optimization ofperformance
Comfort cab Maxcab
7
Maintenance and service made easy
Optimal protection of hydraulic components thanks to 3 μm micro-fi lter
Cleaner hydraulic oil, extended oil service life
Easy access, central measuring points
Fast inspection of the entire hydraulic system
All parts are labeled with a unique part number
Easy and reliable spare parts ordering
Maintenance-optimized Fast and easy fault diagnostics through the eff ectively designed and clearly labeled electrical distributor
Easy accessibility to all service points of the machine
Automatic central lubrication for equipment and slewingring raceway
* optional 7
Maintenance and service made easy
Optimal protection ofhydraulic componentsthanks to 3 μm micro-fi lterCleaner hydraulic oil,extended oil service life
Easy access, centralmeasuring pointsFast inspection of the entirehydraulic system
All parts are labeled with aunique part numberEasy and reliable spare partsordering
Maintenance-optimizedFast and easy fault diagnosticsthrough the eff ectively designedand clearly labeled electricaldistributorEasy accessibility to all servicepoints of the machineAutomatic central lubricationfor equipment and slewingringraceway
* optional
2,5 mmax.4,5 m
Crawler SpecialMobil M* 4-point underframe
* Additional information on our mobile undercarriage is in the separate 835 M E-Series brochure
K16 K18 B18 K16 ULM B19 K20
Multi-shell grab
Double shell grab
Magnet plate
Scrap metal shears
E270 with Maxcab
E300/260 with Maxcab
Attachments Equipment (additional equipment on request)
Cab elevation Uppercarriage
Variants - undercarriage
Modular structure - versatile solutions
Diesel-hydraulic drive
Electro-hydraulic drive
Engine line drum
Transformer
Options
Magnetic generator
2,5 mmax.4,5 m
Crawler SpecialMobil M* 4-point underframe
* Additional information on our mobile undercarriage is in the separate 835 M E-Series brochure
K16 K18 B18 K16 ULM B19 K20
Multi-shell grab
Double shell grab
Magnet plate
Scrap metal shears
E270 with Maxcab
E300/260 with Maxcab
Attachments Equipment (additional equipment on request)
Cab elevation Uppercarriagee
Variants - undercarriage
Modular structure - versatile solutions
Diesel-hydraulic drive
Electro-hydraulic drive
Engine line drum
Transformer
Options
Magnetic generator
9* Option
thanks to railings*, grip handles and non-slip steps
Safe entry and exit
of recyclable sheet steel Robust side cover
due to the broad outrigger area
High stability
for fast work cycles and high-performance material handling
and safe working height, thanks
9* Option
thanks to railiand non-slip s
Safe entry a
t steeler
due to the brooutrigger area
High stabilit
h-ling
nks
SLEWING DRIVEGearbox Compact planetary gear with slant axis
hydraulic motor, integrated brake valves
Parking brake Spring-loaded disk brake
Slewing ring Strong ball race slewing ring, sealed
Slewing speed 0-8 RPM, stepless
UPPERCARRIAGEDesign Torsion-resistant box design, precision
crafted, steel bushings for boom bearing arrangementExtremely service-friendly concept, engine installed in the longitudinal direction
Central lubrication
Autom. central lubrication for equipment and slewing gear raceway
Electrical Central electrical distributor, battery disconnect switch
Cooling system 3-circuit cooling system with high cooling output, thermostatically regulated fan drive for oil cooler and water cooler, fan reversal for cleaning
Options Slewing gear brake via foot pedal Perimeter uppercarriage railing for additional safety
Light package with LED Fire extinguisher Maritime climate paint fi nish as corrosion protection
Electrical hydraulic tank pre-warming at temperatures under -20°
Low-temperature package for work deployments at temperatures under -20°C
Hydraulically-driven magnetic generator 15 kW / 20 kW
HYDRAULIC SYSTEMLoad sensing / LUDV hydraulic system, hydraulic, pilot-controlled work functions, load limit sensing control
Pump type Variable-displacement piston pump in swashplate design, load pressure-independent fl ow distribution for simultaneous, independent control of work functions
Pump control Zero-stroke control, on-demand fl ow-control - the pumps only pump as much oil as will actually be used, pressure purging, load limit sensing control
Delivery rate maximum 740 l/minOperating pressure
to 350 bar
Filtration High-performance fi ltration with long-term change interval
Hydraulic tank 500 lControl system Proportional, precision hydraulic activation of
work movements, 2 hydraulic servo joysticks for work functions, supplemental functions via switches and foot pedals
Safety Hydraulic circuits with safety valves, secured emergency lowering of the equipment at engine standstill, pipe fracture safety valves for lift cylinder and stick cylinder
Options Bio-oil fi lling - ecologically worthwhile Tool Control for programming up to 10 tools in pressure / rate
Supplemental hydraulic circuit for shear attachment
Load moment warning with capacity utilization indicator, e.g. for tasks in halls
Overload safeguard with overload shut-down e.g. for tasks in halls
3 μm hydraulic micro-fi lter - SENNEBOGEN HydroClean
ENGINE224 kW / 304 hp at 2000 RPM
Model Cummins QSL 9-C300 TIER IVfDirect injection, turbo charged, charge air cooler, reduced emissions, ECO mode, idle automation, stop automation, fuel pre-warming
Cooling water-cooled, direction of rotation changeover of the cooler fan
Diesel fi lter with water separator and heater
Air fi lter Dry fi lter with integrated pre-separator, automatic dust discharge, main element and safety element, contamination indicator
Fuel tank 625 lElectr. system 24 VBatteries 2 x 150 Ah, battery disconnect switch
Options Engine block pre-warming at temperatures under -20°C
Electric fuel pump
MACHINE TYPE835
Technical data - equipment
SLEWING DRIVEGearbox Compact planetary gear with slant axis
hydraulic motor, integrated brake valves
Parking brake Spring-loaded disk brake
Slewing ring Strong ball race slewing ring, sealed
Slewing speed 0-8 RPM, stepless
UPPERCARRIAGEDesign Torsion-resistant box design, precision
crafted, steel bushings for boom bearingarrangementExtremely service-friendly concept, engineinstalled in the longitudinal direction
Centrallubrication
Autom. central lubrication for equipment andslewing gear raceway
Electrical Central electrical distributor, battery disconnectswitch
Cooling system 3-circuit cooling system with high cooling output,thermostatically regulated fan drive for oil coolerand water cooler, fan reversal for cleaning
Options Slewing gear brake via foot pedalPerimeter uppercarriage railing foradditional safetyLight package with LEDFire extinguisherMaritime climate paint fi nish as corrosionprotectionElectrical hydraulic tank pre-warming attemperatures under -20°Low-temperature package for workdeployments at temperatures under -20°CHydraulically-driven magnetic generator15 kW / 20 kW
HYDRAULIC SYSTEMLoad sensing / LUDV hydraulic system, hydraulic, pilot-controlled work functions, load limit sensing control
Pump type Variable-displacement piston pump inswashplate design, load pressure-independentfl ow distribution for simultaneous,independent control of work functions
Pump control Zero-stroke control, on-demand fl ow-control- the pumps only pump as much oil as willactually be used, pressure purging, load limitsensing control
Delivery rate maximum 740 l/minOperatingpressure
to 350 bar
Filtration High-performance fi ltration with long-termchange interval
Hydraulic tank 500 lControl system Proportional, precision hydraulic activation of
work movements, 2 hydraulic servo joysticks for work functions, supplemental functionsvia switches and foot pedals
Safety Hydraulic circuits with safety valves, securedemergency lowering of the equipment atengine standstill, pipe fracture safety valvesfor lift cylinder and stick cylinder
Options Bio-oil fi lling - ecologically worthwhileTool Control for programming up to 10 toolsin pressure / rateSupplemental hydraulic circuit for shearattachmentLoad moment warning with capacityutilization indicator, e.g. for tasks in hallsOverload safeguard with overload shut-downe.g. for tasks in halls3 μm hydraulic micro-fi lter - SENNEBOGENHydroClean
ENGINE224 kW / 304 hp at 2000 RPM
Model Cummins QSL 9-C300 TIER IVfDirect injection, turbo charged, charge air cooler,reduced emissions, ECO mode, idle automation,stop automation, fuel pre-warming
Cooling water-cooled, direction of rotation changeover of the cooler fan
Diesel fi lter with water separator and heater
Air fi lter Dry fi lter with integrated pre-separator,automatic dust discharge, main element andsafety element, contamination indicator
Fuel tank 625 lElectr. system 24 VBatteries 2 x 150 Ah, battery disconnect switch
Options Engine block pre-warming at temperaturesunder -20°CElectric fuel pump
MACHINE TYPE835
Technical data - equipment
11
ATTACHMENTSDesign Decades of experience, state-of-the-art
computer simulation, highest level stability, longest service life, large-dimensioned bearing points, sealed special bearing bushes, precision-crafted, quick-release couplings on the grapple connections - open/close/rotate
Cylinders Hydraulic cylinders with high-quality sealing and guide elements, end position damping, sealed bearing points
Options Ball valves on the hydraulic lines grapple open, close, and rotate grapple
Kinematic position II for greater working depth
Maritime coating Maritime coating of all cylinders, nickel-plated and chrome-plated
Float position for equipment via hoist cylinder
Lift limitation / stick limitation adjustable for the stop settings, for example in the hall
SENNEBOGENCab type Hydraulically elevating cab E270
Cab equipment Sliding door, excellent ergonomics, climate automation, seat heater, air-suspension comfort seat, fresh air fi lter / circulating air fi lter, joystick steering, 12 V / 24 V connections, SENCON
Options Cab E300/260 can be elevated 300 cm, and moved forward 260 mm hydraulically
Rigid cab elevation 1.00 m Auxiliary heating system with timer Cab active-charcoal fi lter inside air/outside air, ideal for waste recycling applications
Steering wheel steering with adjustable steering column
Sliding window in the operator door Armored glass windshield, additional safety Armored glass roof window, additional safety
Safety side window Floor window for a better view Sunblind for roof window Protective roof grating FOPS protective roof grating Front protective grating Radio and CD player with speakers Enlarged industrial cab with undivided armored glass windshield
UNDERCARRIAGEDesign Wide-gauge crawler undercarriage in stable,
torsionally rigid box construction
Drive Hydraulic travel drive, integrated in the traveling gear frame for each traveling gear side through an axial piston motor via compact planetary gear.
Parking brake Spring-loaded, hydraulically ventilated disk brakes. Hydraulic brake valves protect the drive engines when moving downhill.
Traveling gear Telescopic crawler undercarriage type T41/380 with mechanical track adjustment from 2.3 – 3.8 m and maintenance-free B6 crawler track (55 links, length 5350 mm) with 700 mm triple-grouser track shoes, canted
Speed 0 - 1.6 km/h stage I0 - 3 km/h stage II
Options Telescopic crawler undercarriage type T41/380 with hydraulic track adjustment of 2.3 - 3.8 m
Maintenance-free B6 crawler track (55 links, length 5350 mm) with 700 mm fl at track shoes, rounded
Maintenance-free B6 crawler track (55 links, length 5350 mm) with 800 mm triple-growser track shoes, canted
OPERATING WEIGHTMass
Note
approximately 54,500 kgBasic machine 835 R withattachment K18 and600 l multi-shell grab
The operating weight variesdepending on the design.
Technical data - equipment
ELECTRIC DRIVEOption Power: 160 kW / 400 volt / 50 Hz
Total connected load 270 kVA, customer-provided fusing 355 A at 400 V - motor start-up via star-delta circuit
Power: 200 kW / 400 volt / 50 HzTotal connected load 340 kVA, customer-provided fusing 425 A at 500 V - motor start-up via star-delta circuit
Advantages: Lowest operating costs, low-noise and virtually vibration-free work, long service life of the hydraulic components
11
ATTACHMENTSDesign Decades of experience, state-of-the-art
computer simulation, highest level stability,longest service life, large-dimensionedbearing points, sealed special bearing bushes,precision-crafted, quick-release couplings onthe grapple connections - open/close/rotate
Cylinders Hydraulic cylinders with high-quality sealingand guide elements, end position damping,sealed bearing points
Options Ball valves on the hydraulic lines grappleopen, close, and rotate grappleKinematic position II for greater workingdepthMaritime coatingMaritime coating of all cylinders, nickel-plated and chrome-platedFloat position for equipment via hoistcylinderLift limitation / stick limitation adjustablefor the stop settings, for example in the hall
SENNEBOGENCab type Hydraulically elevating cab E270
Cab equipment Sliding door, excellent ergonomics, climateautomation, seat heater, air-suspension comfortseat, fresh air fi lter / circulating air fi lter, joysticksteering, 12 V / 24 V connections, SENCON
Options Cab E300/260 can be elevated 300 cm, andmoved forward 260 mm hydraulicallyRigid cab elevation 1.00 mAuxiliary heating system with timerCab active-charcoal fi lter inside air/outsideair, ideal for waste recycling applicationsSteering wheel steering with adjustablesteering columnSliding window in the operator doorArmored glass windshield, additional safetyArmored glass roof window, additionalsafetySafety side windowFloor window for a better viewSunblind for roof windowProtective roof gratingFOPS protective roof gratingFront protective gratingRadio and CD player with speakersEnlarged industrial cab with undividedarmored glass windshield
UNDERCARRIAGEDesign Wide-gauge crawler undercarriage in stable,
torsionally rigid box construction
Drive Hydraulic travel drive, integrated in thetraveling gear frame for each travelinggear side through an axial piston motor viacompact planetary gear.
Parking brake Spring-loaded, hydraulically ventilated diskbrakes. Hydraulic brake valves protect thedrive engines when moving downhill.
Traveling gear Telescopic crawler undercarriage typeT41/380 with mechanical track adjustmentfrom 2.3 – 3.8 m and maintenance-free B6 crawler track (55 links, length 5350 mm) with700 mm triple-grouser track shoes, canted
Speed 0 - 1.6 km/h stage I0 - 3 km/h stage II
Options Telescopic crawler undercarriage typeT41/380 with hydraulic track adjustmentof 2.3 - 3.8 mMaintenance-free B6 crawler track(55 links, length 5350 mm) with 700 mmfl at track shoes, roundedMaintenance-free B6 crawler track(55 links, length 5350 mm) with 800 mmtriple-growser track shoes, canted
OPERATING WEIGHTMass
Note
approximately 54,500 kgBasic machine 835 R withattachment K18 and600 l multi-shell grab
The operating weight variesdepending on the design.
Technical data - equipment
ELECTRIC DRIVEOption Power: 160 kW / 400 volt / 50 Hz
Total connected load 270 kVA, customer-provided fusing 355 A at 400 V - motorstart-up via star-delta circuit
Power: 200 kW / 400 volt / 50 HzTotal connected load 340 kVA, customer-provided fusing 425 A at 500 V - motorstart-up via star-delta circuit
Advantages: Lowest operating costs,low-noise and virtually vibration-freework, long service life of the hydrauliccomponents
4.6
4.9
10.8
9.0
6
10.0
1
10.5
11.0
11.6
12.0
11.2
8
8.7
8.8
8.9
9.1
9.4
9.7
9.9
9.8
9.2
8.2
7.9
8.0
8.1
8.3
8.1
7.6
6.8
5.0
7.
7.
7.
7.
6.8
6.
5.6
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10m
I.18092008144350
Technical data, equipment
Machine shown mirror image
All load ratings are specifi ed in tons (t) and apply at the end of the stick, without attachment, on a solid, level substrate. Attachments, such as grapple, magnet, load hook, et cetera are part of the specifi ed load ratings. The specifi ed values are 75% of the static tipping load or 87% of the hydraulic lifting force, in accordance with ISO 10567. In accordance with the EU standard, EN 474-5, material handling machines in hoist operation must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning device. The specifi ed load ratings apply for the machine supported with 4-point claw support and slewable 360°. The specifi ed load ratings in square brackets [ ] apply with blocked pendulum axle, unsupported, free standing, slewable 360°.
Technical data and dimension information subject to change.
Undercarriage T41/380 - R44D/380 Compact boom 9,1 mLoading stick 6,9 m
Cab maXcab E270, hydraulically elevating
K16Kinemat. Position I
4.6
4.9
10.8
9.0
6
10.01
1
10.5
11.0
11.6
12.0
11.2
8
8.7
8.8
8.9
9.1
9.4
9.7
9.9
9.8
9.2
8.2
7.9
8.0
8.1
8.3
8.1
7.6
6.8
5.05
7.
7.
7.
7.
6.8
6.
5.6
10 5 9 1 8 0 7
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
.
.
.
.
.
m
I.180920081443500
Technical data, equipment
Machine shownmirror image
All load ratings are specifi ed in tons (t) and apply at the end of the stick, without attachment, on a solid, level substrate. Attachments, such as grapple, magnet, loadhook, et cetera are part of the specifi ed load ratings. The specifi ed values are 75% of the static tipping load or 87% of the hydraulic lifting force, in accordance with ISO10567. In accordance with the EU standard, EN 474-5, material handling machines in hoist operation must be equipped with pipe fracture safety devices on the hoistcylinders and an overload warning device. The specifi ed load ratings apply for the machine supported with 4-point claw support and slewable 360°. The specifi ed loadratings in square brackets [ ] apply with blocked pendulum axle, unsupported, free standing, slewable 360°.
Technical data and dimension information subject to change.
Undercarriage T41/380 - R44D/380 Compact boom 9,1 mLoading stick 6,9 m
Cab maXcab E270,hydraulically elevating
K16Kinemat. Position Imat. Posi
13
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
4
7
.0
.8
7.7
6.5
10.6
11.1
11.5
11.4
10.6
9.5
7.9
8.2
8.2
8.4
8.6
8.9
9.2
9.4
9.2
8.8
8.0
7.
7.
7.
7.4
7.5
7.7
7.8
7.
7.7
7.3
6.
6.5
6.5
6.5
6.6
6.7
6.8
6.8
6.5
6.2
7
5.4
5.9
5.9
5.9
5.9
5.9
5.9
5.6
5.2
4.7
5.3
5.2
5.2
5.1
5.0
m
I.18092008113542
Technical data, equipment
Machine shown mirror image
All load ratings are specifi ed in tons (t) and apply at the end of the stick, without attachment, on a solid, level substrate. Attachments, such as grapple, magnet, load hook, et cetera are part of the specifi ed load ratings. The specifi ed values are 75% of the static tipping load or 87% of the hydraulic lifting force, in accordance with ISO 10567. In accordance with the EU standard, EN 474-5, material handling machines in hoist operation must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning device. The specifi ed load ratings apply for the machine supported with 4-point claw support and slewable 360°. The specifi ed load ratings in square brackets [ ] apply with blocked pendulum axle, unsupported, free standing, slewable 360°.
Technical data and dimension information subject to change.
Undercarriage T41/380 - R44D/380 Compact boom 10,1 mLoading stick 7,9 m
Cab maXcab E270, hydraulically elevating
K18Kinemat. Position I
13
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
4
7
.0
.8
7..7
6.5
10.66
11.1
11.5
11.4
10.66
9.5
7.7 99
8.2
8.2
8.4
8.68 6
8.9
9.2
9.4
9.2
8.8
8.0
7.7
7.
7.
7.4
7.7 55
7.7
7.8
7.
7.7
7.3
6.
6.5
6.5
6.5
6.666
6.7
6.8
6.8
6.5
6.2
7
5.4
5.9
5.9
5.5 99
5.9
5.9
5.9
5.55.5.66
5.2
4.7
5.5 33
5.2
5.2
5.1
5.5 00
m
I.180920081135420
Technical data, equipment
Machine shown mirror image
All load ratings are specifi ed in tons (t) and apply at the end of the stick, without attachment, on a solid, level substrate. Attachments, such as grapple, magnet, loadhook, et cetera are part of the specifi ed load ratings. The specifi ed values are 75% of the static tipping load or 87% of the hydraulic lifting force, in accordance with ISO10567. In accordance with the EU standard, EN 474-5, material handling machines in hoist operation must be equipped with pipe fracture safety devices on the hoistcylinders and an overload warning device. The specifi ed load ratings apply for the machine supported with 4-point claw support and slewable 360°. The specifi ed loadratings in square brackets [ ] apply with blocked pendulum axle, unsupported, free standing, slewable 360°.
Technical data and dimension information subject to change.
Undercarriage T41/380 - R44D/380 Compact boom 10,1 mLoading stick 7,9 m
Cab maXcab E270,hydraulically elevating
K18Kinemat. Position Imat. Posit
0 1 2 3 4 5 16 17 18 19 20
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
3.2
3.6
11.
6.3
5.7
2
7
10.2
10.4
9.9
8.8
8.5
7.7
8.0
8.3
8.5
8.3
7.9
7.2
6.1
6.2
6.3
6.4
6.6
6.8
7.0
6.9
6.6
6.1
5.5
5.5
5.6
5.7
5.8
5.9
5.2
5.
5.
5.1
5.1
5.2
5.2
5.3
4.
6
4.6
4.6
4.7
4.7
7
4.7
6
4
4.2
4.1
4.0
3.8
m
I.18092008123320
Technical data, equipment
Machine shown mirror image
All load ratings are specifi ed in tons (t) and apply at the end of the stick, without attachment, on a solid, level substrate. Attachments, such as grapple, magnet, load hook, et cetera are part of the specifi ed load ratings. The specifi ed values are 75% of the static tipping load or 87% of the hydraulic lifting force, in accordance with ISO 10567. In accordance with the EU standard, EN 474-5, material handling machines in hoist operation must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning device. The specifi ed load ratings apply for the machine supported with 4-point claw support and slewable 360°. The specifi ed load ratings in square brackets [ ] apply with blocked pendulum axle, unsupported, free standing, slewable 360°.
Technical data and dimension information subject to change.
Undercarriage T41/380 - R44D/380 Compact boom 10,8 m BananaLoading stick 7,9 m
Cab maXcab E300/260, hydraulic eleva-ting and forward moving (Option)
B18Kinemat. Position I
0 1 2 3 4 5 16 17 18 19 20
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
3.2
3.6
11..
6.3
5..7
2
7
10.2
10.44
9.9
8.8
8.58 5
7.7
8.0
8.3
8.5
8.3
7.9
7.7 22
6.1
6.2
6.3
6.6 44
6.6
6.8
7.0
6.9
6.6
6.6 11
5.5.
5.5.
5.6.
5.5.77
5.8.
5.9.
5.25 2.
5.5.5.
5.
5.1
5.5 11
5.2
5.2
5.5 33
4.4
66
4.6
4.4 66
4.7
4.7
7
4.4 77
6
4
4.2
4.4 11
4.0
3.8
m
I.1809200812332000
Technical data, equipment
Machine shown mirror image
All load ratings are specifi ed in tons (t) and apply at the end of the stick, without attachment, on a solid, level substrate. Attachments, such as grapple, magnet, loadhook, et cetera are part of the specifi ed load ratings. The specifi ed values are 75% of the static tipping load or 87% of the hydraulic lifting force, in accordance with ISO10567. In accordance with the EU standard, EN 474-5, material handling machines in hoist operation must be equipped with pipe fracture safety devices on the hoistcylinders and an overload warning device. The specifi ed load ratings apply for the machine supported with 4-point claw support and slewable 360°. The specifi ed loadratings in square brackets [ ] apply with blocked pendulum axle, unsupported, free standing, slewable 360°.
Technical data and dimension information subject to change.
Undercarriage T41/380 - R44D/380 Compact boom 10,8 m BananaLoading stick 7,9 m
Cab maXcab E300/260, hydraulic eleva-ting and forward moving (Option)
B18Kinemat. Position Iim
15
8.4
13.3
19.2
10.6
3.1
3.8
8.6
12.0
12.8
13.8
14
8.
7.
7.
7.0
8.5
9.4
9.3
9.5
9.8
10.3
10.8
7
8
8.3
7.1
8.1
8.0
8.1
8.3
8.5
8.8
8.9
8.6
7.9
6.8
6.9
7.0
7.0
7.1
7.2
7.3
7.0
6.4
5.6
6.2
6.2
4.
5.2
4
4
2
0
4.3
4.2
3.9
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10m
I.18092008131536
Technical data, equipment
Machine shown mirror image
All load ratings are specifi ed in tons (t) and apply at the end of the stick, without attachment, on a solid, level substrate. Attachments, such as grapple, magnet, load hook, et cetera are part of the specifi ed load ratings. The specifi ed values are 75% of the static tipping load or 87% of the hydraulic lifting force, in accordance with ISO 10567. In accordance with the EU standard, EN 474-5, material handling machines in hoist operation must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning device. The specifi ed load ratings apply for the machine supported with 4-point claw support and slewable 360°. The specifi ed load ratings in square brackets [ ] apply with blocked pendulum axle, unsupported, free standing, slewable 360°.
Technical data and dimension information subject to change.
Undercarriage T41/380 - R44D/380 Compact boom 9,1 mLoading stick 6,6 m ULM
Cab maXcab E270, hydraulically elevating
K16 ULMKinemat. Position I
15
8.88.4
3.313.33.33.3
19.2
10.6111
3.1
3.8
8.6
12.0121212
12.8
13.8
14
8.
7.
7.
7.7 00
8.5
9.4
9.3
9.5
9.8
10.3
10.8
7
8
8.3
7.1
8.1
8.0
8.1
8.3
8.5
8.8
8.9
8.6
7.9
6.8
6.9
7.0
7.0
7.1
7.2
7.3
7.0
6.4
5.6
6.2
6.2
4.
5.22
4
4
2
0
4.4.3
4.2
3.93 90
4718 30 9 821222
718 5
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
7
8
3
.
.
4
3
2
2
22
m
I.180920081315360
Technical data, equipment
Machine shownmirror image
All load ratings are specifi ed in tons (t) and apply at the end of the stick, without attachment, on a solid, level substrate. Attachments, such as grapple, magnet, loadhook, et cetera are part of the specifi ed load ratings. The specifi ed values are 75% of the static tipping load or 87% of the hydraulic lifting force, in accordance with ISO10567. In accordance with the EU standard, EN 474-5, material handling machines in hoist operation must be equipped with pipe fracture safety devices on the hoistcylinders and an overload warning device. The specifi ed load ratings apply for the machine supported with 4-point claw support and slewable 360°. The specifi ed loadratings in square brackets [ ] apply with blocked pendulum axle, unsupported, free standing, slewable 360°.
Technical data and dimension information subject to change.
Undercarriage T41/380 - R44D/380 Compact boom 9,1 mLoading stick 6,6 m ULM
Cab maXcab E270,hydraulically elevating
K16 ULMKinemat. Position Imat. Posit
11.4
8.3
6.5
6.0
5.9
6.0
10
1
6.8
2
5
8
2
1
8
3
6
6
3.9
5.6
6.0
6.2
6.4
6.6
6.8
6.7
6.5
6.1
5.6
4.8
4.0
5.1
5.2
5.4
5.6
5.2
4.7
3.9
4.6
4.
4.
4.
4.
5.0
4.
4.0
3.4
3.6
4.4
3.3
3.9
3.9
3.9
3.9
3.9
3.9
3.9
3.8
3.7
3.5
3.5
3.5
3.5
3.5
3.4
3.3
3.2
2.9
5.8
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
20191817161514131211109876543210-1-2-3-4-5-6-7
232221 24
2221
24
23
m
Machine shown mirror image
All load ratings are specifi ed in tons (t) and apply at the end of the stick, without attachment, on a solid, level substrate. Attachments, such as grapple, magnet, load hook, et cetera are part of the specifi ed load ratings. The specifi ed values are 75% of the static tipping load or 87% of the hydraulic lifting force, in accordance with ISO 10567. In accordance with the EU standard, EN 474-5, material handling machines in hoist operation must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning device. The specifi ed load ratings apply for the machine supported with 4-point claw support and slewable 360°. The specifi ed load ratings in square brackets [ ] apply with blocked pendulum axle, unsupported, free standing, slewable 360°.
Technical data and dimension information subject to change.
Undercarriage R44D/380Pylon 4,5 m
Compact boom 10,8 mLoading stick 9,4 m
Cab maXcab E270, hydraulically elevating
B19Kinemat. Position I
Technical data, equipment
11.4
8.3
6.5
6.0
5.9
6.0
10
1
6...8
2
5
8
2
1
8
3
6
6
3.9
5.6
6.0
6.2
6.4
6.6
6.8
6.7
6.5
6.1
5.6
4.8
4.0
5.1
5.2
5.4
5.6
5.2
4.7
3.9
4.6
4.
4.
4.
4.
5.0
4.
4.0
3.4
3.6
4.4
3.3
93.99
3.9
3.9
3.9
3.9
3.9
3.9
3.8
3.7
3.5
3.5
3.5
3.5
3.5
3.4
3.3
3.2
2.9
5.8
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
20191817161514131211109876543210-1-2-3-4-5-6-7
232221 24
2221
24
23
m
Machine shownmirror image
All load ratings are specifi ed in tons (t) and apply at the end of the stick, without attachment, on a solid, level substrate. Attachments, such as grapple, magnet, loadhook, et cetera are part of the specifi ed load ratings. The specifi ed values are 75% of the static tipping load or 87% of the hydraulic lifting force, in accordance with ISO10567. In accordance with the EU standard, EN 474-5, material handling machines in hoist operation must be equipped with pipe fracture safety devices on the hoistcylinders and an overload warning device. The specifi ed load ratings apply for the machine supported with 4-point claw support and slewable 360°. The specifi ed loadratings in square brackets [ ] apply with blocked pendulum axle, unsupported, free standing, slewable 360°.
Technical data and dimension information subject to change.
Undercarriage R44D/380Pylon 4,5 m
Compact boom 10,8 mLoading stick 9,4 m
Cab maXcab E270,hydraulically elevating
B19Kinemat. Position It. Positi
Technical data, equipment
17
11.9
5.7
5.8
9.2
8.4
8.2
7.5
9.6
9.5
8.6
5.9
6.4
6.9
8.0
8.0
7.7
7.2
5.3
5.
6.
6.
6.
6.
6.
4.3
4.6
4.8
3
5
7
9
3.9
4.0
4.1
4.2
4.4
4.6
4.8
5.0
5.1
5.2
3.3
3.7
3.8
4.6
4.5
7
8
3.9
0
1
1
2
2
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
20191817161514131211109876543210-1-2-3-4-5-6-7
232221 24
2221
2423
m
Machine shown mirror image
All load ratings are specifi ed in tons (t) and apply at the end of the stick, without attachment, on a solid, level substrate. Attachments, such as grapple, magnet, load hook, et cetera are part of the specifi ed load ratings. The specifi ed values are 75% of the static tipping load or 87% of the hydraulic lifting force, in accordance with ISO 10567. In accordance with the EU standard, EN 474-5, material handling machines in hoist operation must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning device. The specifi ed load ratings apply for the machine supported with 4-point claw support and slewable 360°. The specifi ed load ratings in square brackets [ ] apply with blocked pendulum axle, unsupported, free standing, slewable 360°.
Technical data and dimension information subject to change.
Undercarriage R44D/380Pylon 4,5 m
Compact boom 10,8 mLoading stick 9,4 m
Cab maXcab E270, hydraulically elevating
B19Kinemat. Position II
Technical data, equipment
17
11.9
5.7
5.8
9.2
8.4
8.2
7.5
9.6
9.5
8.6
5.9
6.44
6.9
8.0
8.0
7.7
7.2
5.333
5.
6.
6.
6.
6.
6.
4..33
44.4 6
4.8
3
5
7
9
3.9
4.0
4.1
4.2
4.4
4.6
4.8
5.0
5.1
5.2
3.3 3
3.77
3.8
4.6
4.5
7
8
3.9
0
1
1
2
2
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
20191817161514131211109876543210-1-2-3-4-5-6-7
232221 24
2221
2423
m
Machine shownmirror image
All load ratings are specifi ed in tons (t) and apply at the end of the stick, without attachment, on a solid, level substrate. Attachments, such as grapple, magnet, loadhook, et cetera are part of the specifi ed load ratings. The specifi ed values are 75% of the static tipping load or 87% of the hydraulic lifting force, in accordance with ISO10567. In accordance with the EU standard, EN 474-5, material handling machines in hoist operation must be equipped with pipe fracture safety devices on the hoistcylinders and an overload warning device. The specifi ed load ratings apply for the machine supported with 4-point claw support and slewable 360°. The specifi ed loadratings in square brackets [ ] apply with blocked pendulum axle, unsupported, free standing, slewable 360°.
Technical data and dimension information subject to change.
Undercarriage R44D/380Pylon 4,5 m
Compact boom 10,8 mLoading stick 9,4 m
Cab maXcab E270,hydraulically elevating
B19Kinemat. Position IIinemat. Position
Technical data, equipment
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
20191817161514131211109876543210-1-2-3-4-5-6-7
232221 24
2221
2423
14.4
5.7
5.1
5.0
5.3
5.6
11.0
12.3
9.0
0.0
6
1
2
7.2
7.6
8.3
8.1
7.7
7.0
6.9
6.6
5.
5.5
5.7
5.9
6.0
6.
5.
4.7
4.7
4.8
5.0
5.2
5.3
5.4
4.4
4.4
4.5
4.6
4.6
4.7
4.8
4.9
4.9
4.8
4.7
3.6
4.2
4.3
4.3
4.3
4.
4.
4.
4.
4.1
3.8
3.8
0
m
Technical data, equipment
Machine shown mirror image
All load ratings are specifi ed in tons (t) and apply at the end of the stick, without attachment, on a solid, level substrate. Attachments, such as grapple, magnet, load hook, et cetera are part of the specifi ed load ratings. The specifi ed values are 75% of the static tipping load or 87% of the hydraulic lifting force, in accordance with ISO 10567. In accordance with the EU standard, EN 474-5, material handling machines in hoist operation must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning device. The specifi ed load ratings apply for the machine supported with 4-point claw support and slewable 360°. The specifi ed load ratings in square brackets [ ] apply with blocked pendulum axle, unsupported, free standing, slewable 360°.
Technical data and dimension information subject to change.
Undercarriage R44D/380Pylon 4,5 m
Compact boom 10,8 mLoading stick 9,4 m
Cab maXcab E270, hydraulically elevating
K20Kinemat. Position II
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
20191817161514131211109876543210-1-2-3-4-5-6-7
232221 24
2221
2423
14.414.414 4
5.7
5.1
5.5.00
5.3
5.6
111111.0.0
12.32 3312 3
9.9 00
0.00 0
6
1
2
7.7.22
7.7.7.7 6666
8.8 33
8.1
7.7
7.0
6.9
6.6
55.55
5.5
5.7
5.5 99
6.0
6.
5.
4.4 7
4.7
4.4 88
5.0
5.2
5.5 33
5.4
4.444
4.4
4.4 55
4.6
4.6
4.7
4.4 88
4.9
4.9
4.8
4.4 77
3.63.3..
4.4.22
4.3
4.3
4.3
4.4.
4.
4.
4.
4.4.11
3.8
3.88
000
m
Technical data, equipment
Machine shownmirror image
All load ratings are specifi ed in tons (t) and apply at the end of the stick, without attachment, on a solid, level substrate. Attachments, such as grapple, magnet, loadhook, et cetera are part of the specifi ed load ratings. The specifi ed values are 75% of the static tipping load or 87% of the hydraulic lifting force, in accordance with ISO10567. In accordance with the EU standard, EN 474-5, material handling machines in hoist operation must be equipped with pipe fracture safety devices on the hoistcylinders and an overload warning device. The specifi ed load ratings apply for the machine supported with 4-point claw support and slewable 360°. The specifi ed loadratings in square brackets [ ] apply with blocked pendulum axle, unsupported, free standing, slewable 360°.
Technical data and dimension information subject to change.
Undercarriage R44D/380Pylon 4,5 m
Compact boom 10,8 mLoading stick 9,4 m
Cab maXcab E270,hydraulically elevating
K20Kinemat. Position IIKinemat. Positio
19Dimension information in [mm]Detailed information concerning the grabs, as well as log grabs, quick-release systems, and other attachments is provided in the "Attachments" brochure
Grab recommendation
Design / size Grab contentWeight1
max. load capacityShell shape 2
HO G
SGM l kg kg t400.40 400 1920
8,0
600.40 600 2035
800.40 800 2140
1000.40 1000 2040 2290
1250.40 1250 2180 2415
Design / size Grab content Weight1 max. payload
SGZ l kg t
1500.50 1500 1989
8,0
2000.50 2000 2246
2500.50 2500 2345
3000.50 3000 2532
4000.50 4000 2880
3000.50 L 3000 2140
8,03500.50 L 3500 2260
4000.50 L 4000 2480
4500.50 L 4500 2600
1500.50 HD 1500 22408,0
2000.50 HD 2000 2535
Type series / model Power DeadweightBreak-away
forceLoad-bearing
in kg
WOKO kW kg kN Bramme(safety factor 2)
S-RSL 15 12,2 1950 360 1800
S-RSL 17 17,0 2500 460 2300
S-RLB 13,5 10,0 1700 300 15000
S-RLB 15 11,7 2400 380 19000
S-RLB 17 17,8 3300 640 32000
Recommended magnetic generator: 15 kW / 20 kW
Design / size Grab contentWeight1
max. load capacityShell shape2
HO G
SGM l kg kg t400.40-4 400 1570 1720
8,0
600.40-4 600 1790
800.40-4 800 1930
1000.40-4 1000 1755 2085
1250.40-4 1250 1850 2200
Double shell grab SGZ
1) Weight information without grab suspension, stick bolts, hose system
2) Half-open shells: Shell sheet steel 400 mm wide, from content 1250 l shell sheet steel 500 mm wide
*) On request
19Dimension information in [mm]Detailed information concerning the grabs, as well as log grabs, quick-release systems, andother attachments is provided in the "Attachments" brochure
Grab recommendation
Design / size Grab contentWeight1
max. load capacityShell shape 2
HO G
SGM l kg kg t400.40 400 1920
8,0
600.40 600 2035
800.40 800 2140
1000.40 1000 2040 2290
1250.40 1250 2180 2415
Design / size Grab content Weight1 max. payload
SGZ l kg t
1500.50 1500 1989
8,0
2000.50 2000 2246
2500.50 2500 2345
3000.50 3000 2532
4000.50 4000 2880
3000.50 L 3000 2140
8,03500.50 L 3500 2260
4000.50 L 4000 2480
4500.50 L 4500 2600
1500.50 HD 1500 22408,0
2000.50 HD 2000 2535
Type series / model Power DeadweightBreak-away
forceLoad-bearing
in kg
WOKO kW kg kN Bramme(safety factor 2)((
S-RSL 15 12,2 1950 360 1800
S-RSL 17 17,0 2500 460 2300
S-RLB 13,5 10,0 1700 300 15000
S-RLB 15 11,7 2400 380 19000
S-RLB 17 17,8 3300 640 32000
Recommended magnetic generator: 15 kW / 20 kW
Design / size Grab contentWeight1
max.load capacityShell shape2
HO G
SGM l kg kg t400.40-4 400 1570 1720
8,0
600.40-4 600 1790
800.40-4 800 1930
1000.40-4 1000 1755 2085
1250.40-4 1250 1850 2200
Double shell grab SGZ
1) Weight information without grabsuspension, stick bolts, hose system
2) Half-open shells: Shell sheet steel 400 mm wide,from content 1250 l shell sheet steel 500 mm wide
*) On request
Dimensions
835 R with wide gauge undercarriage R44D/380 and hydraulic elevating andforward moving cab E300/260
835 R with hydraulic telescopic undercarriage T41/380 and hydraulic elevating cab E270
Transport width 3000 mm
6355
25902600
5350
440038004500
3675
30006753675 3295
1050
45003800 5350
5810
Dimensions
835 R with wide gauge undercarriage R44D/380 and hydraulic elevating andforward moving cab E300/260
835 R with hydraulic telescopic undercarriage T41/380 and hydraulic elevating cab E270
Transport width 3000 mm
21
L
H2
X
Loading boom
GrabstickTransport length (L)
Transport height (H2)
Transport height (H1)
Transport height (X)
K16 9,1 m 6,9 m 13,5 m 3,20 m - -K18 10,1 m 7,9 m 14,5 m 3,90 m 3,50 0,20 mB18 10,8 m Banana 7,9 m 15,1 m 3,45 m - -K16 ULM 9,1 m 6,6 m 13,5 m 3,80 m 3,45 0,20 m
Dimensions
Transport dimensions 835 R with undercarriage type T41/380
835 R with wide gauge undercarriage R44D/380, 4,5m Pylon and hydraulic elevating cab type E270
21
5610
700
45003800 4240
5100
8040
6100
7350
8450
4,5 m 4,5 m
1070
0
L
H2
X
Loadingboom
GrabstickTransport length (L)
Transportheight (H2)
Transportheight (H1)
Transportheight (X)
K16 9,1 m 6,9 m 13,5 m 3,20 m - -K18 10,1 m 7,9 m 14,5 m 3,90 m 3,50 0,20 mB18 10,8 m Banana 7,9 m 15,1 m 3,45 m - -K16 ULM 9,1 m 6,6 m 13,5 m 3,80 m 3,45 0,20 m
DimensionsDimensions
Transport dimensions 835 R with undercarriage type T41/380
835 R with wide gauge undercarriage R44D/380, 4,5m Pylon and hydraulic elevating cab type E270
ca.11
25
5350
X
L
H
Transport dimensions
Loading boom GrabstickTransport length
(L)Transport height
(H)Transport height
(X)
K16 9,1 m 6,9 m 13,4 m 3,45 m 0,25 mK18 10,1 m 7,9 m 14,4 m 3,45 m 0,50 mB18 10,8 m Banana 7,9 m 15,1 m 3,45 m 0,25 mK16 ULM 9,1 m 6,6 m 13,4 m 3,45 m 0,50 m
Transport dimensions 835 R with undercarriage type R44D/380
Crawler, B6 crawler R44D/380 with 700 mm track shoes, weight approx. 6.850 kg - 2 pieces
ca.11
25
5350
X
L
H
Transport dimensions
Loading boom GrabstickTransport length
(L)Transport height
(H)Transport height
(X)
K16 9,1 m 6,9 m 13,4 m 3,45 m 0,25 mK18 10,1 m 7,9 m 14,4 m 3,45 m 0,50 mB18 10,8 m Banana 7,9 m 15,1 m 3,45 m 0,25 mK16 ULM 9,1 m 6,6 m 13,4 m 3,45 m 0,50 m
Transport dimensions 835 R with undercarriage type R44D/380
Crawler, B6 crawler R44D/380 with 700 mm track shoes,pp pweight approx. 6.850 kg - 2 pieces
23
Notes
23
Notes