2020 edition valves & fittings for ultra high …high pressure type upg®fittings union tees...

SUS316 Standard (Possible to make by the ASTM A479 316/316L also)SUH660 available also

Please refer to the material list of each valve equipment for parts.

99.9 MPaFilters

UJUN TypeConed-and-threaded connectionHigh Pressure Type

UPG®Fittings

Union Tees

Union Elbows99.9 MPa Check Valves

99.9 MPa Stop Valves(High Cv Value Type)

Ultra Low Temperature Valves for Liquefied Hydrogen (Automatic Operation Valves), 160-mm Cylinder Diameter, Long Axis Type

99.9 MPaCompactManual Valves

95 MPaManual Valveswith UPG®Fittings

45MPaAutomatic Valveswith UPG®Fittings

99.9 MPaFlow Control Valves

2020 edition

Valves & Fittings for Ultra High-Pressure Hydrogen Gas

We welcome customer feedback for all of our products and services.BZZB A.Z 000 AE-ZYCAT: No.100-03E-F

Flow direction

(200)

20

52(50

)

75

2Xφ8.5

35

8×φ3Leak port

(274)

(288)

(32)

4×M5×0.8Threaded section length 10

2035

φ146

18

1/4NPTOperating pressure supply port

（160）（102）

Adapter cableOuter diameter φ11

（92）（122）

CollarNut

A A1

(L)

55

HEX.B

φDφD

Flow direction

A4Xφ3

Threaded section length 10

NutCollar

A1

4×M8×1.25

Leak port

(160)

(283)

(416)

(134)

Ø220

45 45

16

(298)

80

(27) (47

)51


Adapter cableOuter diameter φ11

115 HEX.8(L)

菓艣

■ Valves 99.9 MPa Flow Control Valves (Compact Type) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 1 99.9 MPa Flow Control Valves (High Cv Value Type) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 1 99.9 MPa Stop Valves (High Cv Value Type) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 2 99.9 MPa Stop Valves (For Precool Low Temperature) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 2 99.9 MPa Stop Valves (For Precool Low Temperature, High Cv Value Type) ・・・・・・・・・・・・・・・・・・・・・・・・・ 2 50 MPa Flow Control Valves (Compact Type)　・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 3 50 MPa Stop Valves ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 3

■ Accessories for Automatic Valves Regulators with Filter ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 4 Solenoid Valves ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 4 Proximity Switch, Controller ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 4 Explosion-Proof accessores For Positioners ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 4

■ Check Valves, Filters 99.9 MPa Line Check Valves ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 5 99.9 MPa Filters ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 6 50 MPa Line Check Valves ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 6 50 MPa Filters ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 7 Pressure Relief Device (PRD) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 7 Container Valves ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 7

■ Automatic Valves with UPG® Fittings ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 17 95 MPa Type 50 MPa Type 45 MPa Type

■ Manual Valves with UPG® Fittings ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 18 95 MPa Type 50 MPa Type

■ Various Change Couplers for UPG® ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 21 95 MPa Type 50 MPa Type

■ Filters with UPG® Fittings ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 20 95 MPa Type 50 MPa Type

■ Line Check Valves with UPG® Fittings ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 19 95 MPa Type 50 MPa Type

■ PROVIDER POWER UNIT ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 22■ Flow Control Problem Solutions Esusoc (abbreviations: Engineering Services Unit Solutions Company) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 23

■ Cv Value Calculation ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 26

■ Integrated Solutions ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 25

■ Fittings UJUN Type (Max. Working Pressure 99.9 MPa Over) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 10 UJU Type (Max. Working Pressure 50 MPa) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 11

■ Piping Installation Guidelines ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 12

■ Adapters ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 14

■ Needle Valves 99.9 MPa Compact Manual Valves ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 5

■ Ultra Low Temperature Valves for Liquefied Hydrogen Ultra Low Temperature Valves for Liquefied Hydrogen (Automatic Operation Valves), 160-mm Cylinder Diameter, Long Axis Type ・・・・・ 8 Ultra Low Temperature Valves for Liquefied Hydrogen (Automatic Operation Valves) ・・・・ 9 Ultra Low Temperature Valves for Liquefied Hydrogen (Manual Valves) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 9

P

■ UPG®Fittings ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 15 Max. Working Pressure 50 MPa ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 16

■ MaterialsPartsBodySeatStem

Gland PackingPacking Gland Bush

MaterialsSUS316+Co base alloySUS316+Co base alloySUS316+Co base alloy

PVDF+PFASUS304

■ Dimensions, Ordering No.Nut Threads(valve body side)

A A1

Collar Threads(tube side) HEX.

B

Cv ValueMAX.

Ordering No.

6.35 9/16-18UNF3/4-16UNF1 1/8-12UNF

(Left)1/4-28UNF(Left)3/8-24UNF(Left)9/16-18UNF

99107121

172230

0.10.150.25

E32M3R4-7100-6.35-*-MG-N28.5-CNE32M3R4-7100-9.52-*-MG-N28.5-CNE32M3R4-7100-14.2-*-MG-N28.5-CN

9.5214.2

*: Indicates the Cv Value number

NominalDiameter

LCollar and nut

insertion referencedimensions

1. Precise flow control for ultra high-pressure hydrogen gas.2. Flow coefficient (Cv Value) can be selected and replaced from

a large variety of disc & sheats.3. Smart positioner with communications functioncan be

available.

■ SpecificationsDesign Pressure

Design TemperatureFluid Temperature

Range

99.9 MPa85 °C−10 to+85 °C

Note: When using in a pre cool line, please contact when ordering.

PartsBodySeatDiscStem

Gland Packing


SUH660PVDF+PFA

■ Materials■ SpecificationsDesign Pressure

Design TemperatureUsage Fluid

Temperature Range

99.9 MPa85 °C

−10 to +85 °C

FeaturesFeatures1. Precise flow control for ultra high-pressure hydrogen.2. Flow coefficient (Cv Value) can be selected and replaced

from a large variety of disc & sheats.3. Smart positioner with communications function can be

available.

1. All wetted parts of Valves, Unions and Fittings in this catalog should be with non-corrosive gases only.2. Please use each valve after confirming the instruction manual and daily inspection manual.Caution

60,000 psi Type

40,000 psi Type99.9 MPa Flow Control Valves (High Cv Value Type)

99.9 MPa Flow Control Valves (Compact Type)

Stop Valves without positioner also available.■ Other

Valves

■ Dimensions, Ordering No.NominalDiameter

Nut Threads(valve body side)

A A1

Collar Threads(tube side)

LCollar and nut


HEX.B Cv ValueMAX. Ordering No.

1 1/8-12UNF (Left)9/16-18UNF 161 30 0.5 E32M2R2-7100W-14.2-40-*－N28.5-CN14.2


*: Please contact us when ordering for required explosion-proof standards. （ATEX,CSA,KCs…etc.）

　　It is possible a combination of inner painted in blue.

PositionerModel 07

08091011121314151617

0.50.350.250.150.10.070.050.0350.0250.0150.01

Cv ValueCv Value number

Renge Ability

Value NatureR220:1

R330:1

R440:1

R550:1

R660:1

R770:1

R880:1

R990:1

R10100:1

EQ%、LinearE32 Electropneumatic positioner (Smart positioner, Samsung. Type 3730-2)

(Equipped with diagnosis function; intrinsic safety explosion-proof: Exia II CT6)

Electropneumatic positioner (Smart positioner, Samsung, Type 3731-3)(Equipped with diagnosis function and HART® communications function; pressure-/explosion-proof: Exd II CT6)

E53

■ Positioner ■ Cv Value

FeaturesFeatures

Table of contents

Download the latest catalog from "http://www.fujikin.co.jp/go/c10003". 1

4×φ3（Leak port）

φ146

HEX.B

49

(232)

4×M5×0.8


27.5

L

(256)

E

Operating pressure supply port

Collar

Nut

φD

(L1)

A

A1

2×φ8.5

Rc1/4

18

C

18

Flow direction

（92）（122）

HEX.B

4-φ3(Leak port)

49

φ146Threaded section length 10


(232) (25

6)

(160）（102）

CollarNut

φD

AA1

2×φ8.5

L(L1)

C

27.5

Flow direction

E

18

Outer diameter φ11

4×M5×0.8

Adapter cable

.

..

□170

(84)

33(51

)

φ6.35

φ9.7

φ6.5

(15.8)19.1

100 (23)(23)(146)

22

(249)

60°

HEX.30

1・1/8-12UNF-2B

(Left)9/16-18UNF-2B

Flow direction

(62)

.

..

....

.

φ180

38

110

2×φ3Leak port

Flow direction

Rc1/4

CollarNut

(254)

20

2Xφ8.5

(342)


18


(50)

(328)

30 30

85(L)

A A1

φDφD

(32) HEX.B

8×φ3Leak port

55

φ146

HEX.38

1・1/8-12UNF-2B(Left)9/16-18UNF-2B

□170

(71)

33(38

)

Ø6.35

Ø9.7

Ø6.5(15.8)19.1

100 (23)(23)(146)

22

(341.5

)

60°

HEX.30

Flow direction

(49)

..

Ø180

55

110

2×φ3Leak port

NominalDiameter


A A1


LCollar and nut



6.35 9/16-18UNF3/4-16UNF11/8-12UNF


109117131

172230

0.10.150.25

M3R4-7100M-6.35-MG-N28.5-CNM3R4-7100M-9.52-MG-N28.5-CNM3R4-7100M-14.2vMG-N28.5-CN

9.5214.2

Design PressureDesign Temperature

Usage Fluid Temperature Range

99.9 MPa50 °C

Operating Pressure 0.4 MPaCv Value 0.25

−40 to +50 °C

■ Specifications

FeaturesFeatures1. No usage restrictions on flow direction and differential

pressure

■ MaterialsPartsBodyLid

SeatStem

Gland Packing


SUH660PVDF+PFA

C160-UH-7100C-14.2-40-N28.5-CN■ Ordering No.



99.9 MPa85 °C

Operating Pressure 0.5～0.7MPaCv Value 1

−40 to +85 °C

■ Specifications

FeaturesFeatures1. Full-bore type [accommodates port diameter equal to or

greater than the inner diameter of 14.2 (40,000psi) size (ø6.35)]

2. No usage restrictions on flow direction and differential pressure

■ MaterialsPartsBodyDisc

Gland PackingActuator

MaterialsSUS316+Co base alloy

SUH660PVDF+PFA

A5056, other

99.9 MPa Stop Valves (For Precool Low Temperature, High Cv Value Type)

FeaturesFeatures1. Precise flow control for ultra high-pressure hydrogen gas.2. Flow coefficient (Cv Value) can be selected and replaced from a large variety of disc sheets.3. Smart positioner with communications functioncan be available.


Gland PackingO-ring


SUS316PVDF+PFA

HNBR

■ Materials

■ Dimensions, Ordering No.

NominalDiameter


A A1


L1Collar and nut


HEX.BECL Cv ValueMAX. Ordering No.

6.35 7/16 -20UNF9/16-18UNF13/16-16UNF


8888105

141722

363638

707085

26.526.534

0.150.350.5

E32M3R4-750-9.52-*-N28.5-CNE32M3R4-750-14.2-*-N28.5-CN

E32M3R4-750-6.35-*-N28.5-CN9.5214.2



Range

50 MPa85 °C−40 to+85 °C


Gland PackingO-ring


SUS316PVDF+PFA

HNBR

■ Materials

1. Easy maintenance doe to disk and sheet replacement.



Range

50 MPa85 °C−40 to+85 °C

FeaturesFeatures


NominalDiameter


A A1


L1Collar and nut



6.35 7/16-20UNF9/16-18UNF13/16-16UNF


8888

105

141722

363638

707085

26.526.534

0.150.50.5

M3R4-750-9.52-N28.5-CNM3R4-750-14.2-N28.5-CN

M3R4-750-6.35-N28.5-CN9.5214.2


40,000 psi Type

1. All wetted parts of Valves, Unions and Fittings in this catalog should be with non-corrosive gases only.

2. Please use each valve after confirming the instruction manual and daily inspection manual.

Caution 1. All wetted parts of Valves, Unions and Fittings in this catalog should be with non-corrosive gases only.


Caution

C160-UH-7100-14.2-40-N28.5-CN■ Ordering No.

PartsBodyDisc


■ Materials



99.9 MPa85 °C

Operating Pressure 0.5 to 0.7MPaCv Value(MAX.) 1

−10 to +85 °C

■ Specifications



2. No usage restrictions on flow direction and differential pressure.


SUH660PVDF+PFA

A5056 (amongst others)

99.9 MPa Stop Valves (For Precool Low Temperature)　 60,000 psi Type

40,000 psi Type99.9 MPa Stop Valves (High Cv Value Type) 50 MPa Flow Control Valves (Compact Type)　

50 MPa Stop Valves

20,000 psi Type

20,000 psi Type

Note: When using in a pre cool line, 　　　please contact when ordering.



PositionerModel 07

08091011121314151617

0.50.350.250.150.10.070.050.0350.0250.0150.01


Renge Ability

Value NatureR220:1

R330:1

R440:1

R550:1

R660:1

R770:1

R880:1

R990:1

R10100:1




E53



2 Download the latest catalog from "http://www.fujikin.co.jp/go/c10003". 3

4×φ3（Leak port）

φ146

HEX.B

49

(232)

4×M5×0.8


27.5

L

(256)

E


Collar

Nut

φD

(L1)

A

A1

2×φ8.5

Rc1/4

18

C

18

Flow direction

（92）（122）

HEX.B

4-φ3(Leak port)

49

φ146Threaded section length 10


(232) (25

6)

(160）（102）

CollarNut

φDAA1

2×φ8.5

L(L1)

C

27.5

Flow directionE

18

Outer diameter φ11

4×M5×0.8

Adapter cable

.

..

□170

(84)

33(51

)

φ6.35

φ9.7

φ6.5

(15.8)19.1

100 (23)(23)(146)

22

(249)

60°

HEX.30

1・1/8-12UNF-2B

(Left)9/16-18UNF-2B

Flow direction

(62)

.

..

....

.

φ180

38

110

2×φ3Leak port

Flow direction

Rc1/4

CollarNut

(254)

20

2Xφ8.5

(342)


18


(50)

(328)

30 30

85(L)

A A1

φDφD

(32) HEX.B

8×φ3Leak port

55

φ146

HEX.38

1・1/8-12UNF-2B(Left)9/16-18UNF-2B

□170

(71)

33(38

)

Ø6.35

Ø9.7

Ø6.5(15.8)19.1

100 (23)(23)(146)

22

(341.5

)

60°

HEX.30

Flow direction

(49)

..

Ø180

55

110

2×φ3Leak port

NominalDiameter


A A1


LCollar and nut



6.35 9/16-18UNF3/4-16UNF11/8-12UNF


109117131

172230

0.10.150.25

M3R4-7100M-6.35-MG-N28.5-CNM3R4-7100M-9.52-MG-N28.5-CNM3R4-7100M-14.2vMG-N28.5-CN

9.5214.2



99.9 MPa50 °C

Operating Pressure 0.4 MPaCv Value 0.25

−40 to +50 °C

■ Specifications

FeaturesFeatures1. No usage restrictions on flow direction and differential

pressure

■ MaterialsPartsBodyLid

SeatStem

Gland Packing


SUH660PVDF+PFA

C160-UH-7100C-14.2-40-N28.5-CN■ Ordering No.



99.9 MPa85 °C

Operating Pressure 0.5～0.7MPaCv Value 1

−40 to +85 °C

■ Specifications



2. No usage restrictions on flow direction and differential pressure

■ MaterialsPartsBodyDisc



SUH660PVDF+PFA

A5056, other

99.9 MPa Stop Valves (For Precool Low Temperature, High Cv Value Type)

FeaturesFeatures1. Precise flow control for ultra high-pressure hydrogen gas.2. Flow coefficient (Cv Value) can be selected and replaced from a large variety of disc sheets.3. Smart positioner with communications functioncan be available.


Gland PackingO-ring


SUS316PVDF+PFA

HNBR

■ Materials


NominalDiameter


A A1


L1Collar and nut



6.35 7/16 -20UNF9/16-18UNF13/16-16UNF


8888

105

141722

363638

707085

26.526.534

0.150.350.5

E32M3R4-750-9.52-*-N28.5-CNE32M3R4-750-14.2-*-N28.5-CN

E32M3R4-750-6.35-*-N28.5-CN9.5214.2



Range

50 MPa85 °C−40 to+85 °C


Gland PackingO-ring


SUS316PVDF+PFA

HNBR

■ Materials

1. Easy maintenance doe to disk and sheet replacement.



Range

50 MPa85 °C−40 to+85 °C

FeaturesFeatures


NominalDiameter


A A1


L1Collar and nut



6.35 7/16-20UNF9/16-18UNF13/16-16UNF


8888

105

141722

363638

707085

26.526.534

0.150.50.5

M3R4-750-9.52-N28.5-CNM3R4-750-14.2-N28.5-CN

M3R4-750-6.35-N28.5-CN9.5214.2


40,000 psi Type





Caution

C160-UH-7100-14.2-40-N28.5-CN■ Ordering No.

PartsBodyDisc


■ Materials



99.9 MPa85 °C

Operating Pressure 0.5 to 0.7MPaCv Value(MAX.) 1

−10 to +85 °C

■ Specifications



2. No usage restrictions on flow direction and differential pressure.


SUH660PVDF+PFA

A5056 (amongst others)

99.9 MPa Stop Valves (For Precool Low Temperature)　 60,000 psi Type

40,000 psi Type99.9 MPa Stop Valves (High Cv Value Type) 50 MPa Flow Control Valves (Compact Type)　

50 MPa Stop Valves

20,000 psi Type

20,000 psi Type

Note: When using in a pre cool line, 　　　please contact when ordering.



PositionerModel 07

08091011121314151617

0.50.350.250.150.10.070.050.0350.0250.0150.01


Renge Ability

Value NatureR220:1

R330:1

R440:1

R550:1

R660:1

R770:1

R880:1

R990:1

R10100:1




E53



2 Download the latest catalog from "http://www.fujikin.co.jp/go/c10003". 3

L1

HEX.46(L2)

Nut Collar

øD

AA1

Flow direction

ø50

HEX.B

ø3 (Leak port)

Nut Collar

9.7

L

(H4)

H5

H1

(H2)

H3

(H)

B1

øD

A

øD1

(L3)øD3

C

2×ø5.6

2×M4×0.7

HEX.W

A1

(L1)HEX.B

Flow direction

3×ø3 (Leak port)

Nominal diameter 14.2 disc shape

Proximity switch

Controller

SBP-16-1/2NPT

EXBM-16R-*

Accessories for Automatic Valves

FeaturesFeaturesRegulating required air supply pressure for Flow Control Valves.

IM1-12EX-R

Proximity switch

Controller [Exia]ⅡC

Explosion-proof Construction

Bi2-G12-Y1 ExiaⅡCT6

Model No. IDEC Corporation

FeaturesFeatures1. Output electrical signals indicating open or close status of valves.2. Uses a two-wire DC system to allow for long-distance wiring highly

resistant to noise.

Item

ExplosionProof

Construction

ExdⅡCT6

Makers

KANEKOSANGYOCO., LTD

FeaturesTypes

*: When ordering, please specify explosion-proof construction and power supply specification.

Item Numbers

MOOU-8-E22POA-SA

Ex e mb ⅡCASCOJAPANCo., Ltd

・Safety ＆ Resin Filling Explosion Proof Type・Hydrogen Explosion Proof Type Ex e mb ⅡC、・Outdoor Prevention Drop IP67・Applicable to Manifold Type

・Pressure-resistant & Explosion Proof Type・Outdoor Prevention Drop IP67・Changerble by manual operation・Various Explosion Proof Standard

WBLPG551A005MS

WBLPG551A017MS

WBLPG551A001MS

Direct Mount Type3-Way


NAMUR Type3,4-Way

Ex ia ⅡC T4ASCOJAPANCo., Ltd

・Instrinsically Safe Explosion Proof Type・Hydrogen Explosion Proof Type Ex ia ⅡC T4、・Outdoor Prevention Drop IP67・Certain operation by spring return Type

CFSCISG551C505MO

CFSCISG551C517MO

CFSCISG551C501MO



NAMUR Type3,4-Way


Fluid Temperature Range

99.9 MPa85 °C

−40 to +85 °C

■ Specifications

PartBodyDiscStem

Gland PackingGland Nut

Handle


SUH660SUS316

PVDF+PFASUS316ADC12

■ Materials

■ Specifications



FluidTemperature Range

99.9 MPa85 °C−40 to+85 °C

NominalDiameter

D1


D A1A


6.35 9/16-18UNF3/4-16UNF1 1/8-12UNF


Cv ValueMAX.

0.140.230.85

9.5214.2

B

172230

B1

383838

C

353540

W

131319

H2

191922

H4

252533

H3

38.538.542

H1

57.557.564

H5

32.532.531

OrificeDiameter

3.23.26

D3

HandleDiameter

585888

L L1

InterfacialDistance

707078

94102124

L3

Lift

555

H

Full-openHeight

118.5118.5138

1.21.21.6

Mass(approx.)

(kg)

FeaturesFeatures1. Compact and with Durable Manual Valves2. With Lock Nut

FeaturesFeatures1. Compact, in-line type2. Little pressure drop due to optimal flow pass

Cracking Pressure: Max of 6.86 kPaRange of Operating

Differential Pressure (Counter Pressure): Min of 10 MPa



Caution


Regulators with Filter

Solenoid Valves

Proximity Switch, Controller

0.9 MPa

0.26 Kg

Rc1/4 (Pressure gauge: Rc1/8)

Polyprene bonded materialElement: 5 μm

XR-108Model No.

SSS Co., Ltd.Makers

Specifications

Max Supply Pressure

Weight

Air Connecting Port

Filter Element

Ex e mb ⅡC

Ex ia ⅡC T4

IDEC Corporation

Shimada Elctric Co.,Ltd Shimada Elctric Co.,Ltd

Shimada Elctric Co.,Ltd

SSS Co., Ltd.

ASCO JAPAN Co., LtdKANEKO SANGYO CO., LTD

P & F

P & F

Makers

KFD2-SCD-Ex1. LK

Model No.

Exia ⅡC


Intrinsially Safe Explosion proof Barrer for E32M3 Series

Cable gland for E53M3 (Explosion Proof) Series

E53M3 (Explosion Proof) Electrical Wiring Closure PlugMakers

SBP-16-1/2NPT

Model No.

1/2 NPT

Connecting Threads

Makers

EXBM-16R- *Model No.

Exd ⅡC


1/2 NPT

Connecting Threads

Needle Valves

0.10.250.25

PartBody ABody B

DiscSpring

MaterialsSUS316+Co base alloySUS316+Co base alloy

PEEKSUS316

■ Materials


99.9 MPa Line Check ValvesCheck Valves, Filters

99.9 MPa Compact Manual Valves

60,000 psi Type (40000 psi Type can also be manufactured.)

NominalDiameter D

Nut Threads(filter body side)

A A1 L1 L2


InterfacialDistance

CvValueMAX.

B Ordering No.

6.35 9/16-18UNF3/4-16UNF

1 1/8-12UNF

(Left)1/4-28UNF(Left)3/8-24UNF

(Left)9/16-18UNF

708484

94116130

172230

UCL-7100-6.35-N28.5-CNUCL-7100-9.52-N28.5-CNUCL-7100-14.2-N28.5-CN

9.5214.2

60,000 psi Type(Nominal Diameter:6.35,9.52),40,000 psi Type(Nominal Diameter:14.2)

1.21.4

1.11 1/8-12UNF (Left)9/16-18UNF 110 15630 UCL-7100-14.2-40-N28.5-CN14.2 2.71.3

Mass(approx.)

(kg)

UH-7100L-6.35-N28.5-CNUH-7100L-9.52-N28.5-CNUH-7100L-14.2-40-N28.5-CN

Ordering No.

Explosion-Proof accessores For Positioners

*: Please request necessary.

*: Please let us know the outer diameter of the cable to be used.

4 5Download the latest catalog from "http://www.fujikin.co.jp/go/c10003".

L1

HEX.46(L2)

Nut Collar

øD

AA1

Flow direction

ø50

HEX.B

ø3 (Leak port)

Nut Collar

9.7

L

(H4)

H5

H1

(H2)

H3

(H)

B1

øD

A

øD1

(L3)øD3

C

2×ø5.6

2×M4×0.7

HEX.W

A1

(L1)HEX.B

Flow direction

3×ø3 (Leak port)

Nominal diameter 14.2 disc shape

Proximity switch

Controller

SBP-16-1/2NPT

EXBM-16R-*

Accessories for Automatic Valves

FeaturesFeaturesRegulating required air supply pressure for Flow Control Valves.

IM1-12EX-R

Proximity switch

Controller [Exia]ⅡC


Bi2-G12-Y1 ExiaⅡCT6

Model No. IDEC Corporation

FeaturesFeatures1. Output electrical signals indicating open or close status of valves.2. Uses a two-wire DC system to allow for long-distance wiring highly

resistant to noise.

Item

ExplosionProof

Construction

ExdⅡCT6

Makers

KANEKOSANGYOCO., LTD

FeaturesTypes

*: When ordering, please specify explosion-proof construction and power supply specification.

Item Numbers

MOOU-8-E22POA-SA

Ex e mb ⅡCASCOJAPANCo., Ltd

・Safety ＆ Resin Filling Explosion Proof Type・Hydrogen Explosion Proof Type Ex e mb ⅡC、・Outdoor Prevention Drop IP67・Applicable to Manifold Type

・Pressure-resistant & Explosion Proof Type・Outdoor Prevention Drop IP67・Changerble by manual operation・Various Explosion Proof Standard

WBLPG551A005MS

WBLPG551A017MS

WBLPG551A001MS



NAMUR Type3,4-Way

Ex ia ⅡC T4ASCOJAPANCo., Ltd

・Instrinsically Safe Explosion Proof Type・Hydrogen Explosion Proof Type Ex ia ⅡC T4、・Outdoor Prevention Drop IP67・Certain operation by spring return Type

CFSCISG551C505MO

CFSCISG551C517MO

CFSCISG551C501MO



NAMUR Type3,4-Way



99.9 MPa85 °C

−40 to +85 °C

■ Specifications

PartBodyDiscStem


Handle


SUH660SUS316

PVDF+PFASUS316ADC12

■ Materials

■ Specifications




99.9 MPa85 °C−40 to+85 °C

NominalDiameter

D1


D A1A


6.35 9/16-18UNF3/4-16UNF1 1/8-12UNF


Cv ValueMAX.

0.140.230.85

9.5214.2

B

172230

B1

383838

C

353540

W

131319

H2

191922

H4

252533

H3

38.538.542

H1

57.557.564

H5

32.532.531

OrificeDiameter

3.23.26

D3

HandleDiameter

585888

L L1

InterfacialDistance

707078

94102124

L3

Lift

555

H

Full-openHeight

118.5118.5138

1.21.21.6

Mass(approx.)

(kg)

FeaturesFeatures1. Compact and with Durable Manual Valves2. With Lock Nut


Cracking Pressure: Max of 6.86 kPaRange of Operating




Caution


Regulators with Filter

Solenoid Valves

Proximity Switch, Controller

0.9 MPa

0.26 Kg

Rc1/4 (Pressure gauge: Rc1/8)

Polyprene bonded materialElement: 5 μm

XR-108Model No.

SSS Co., Ltd.Makers

Specifications

Max Supply Pressure

Weight

Air Connecting Port

Filter Element

Ex e mb ⅡC

Ex ia ⅡC T4

IDEC Corporation

Shimada Elctric Co.,Ltd Shimada Elctric Co.,Ltd

Shimada Elctric Co.,Ltd

SSS Co., Ltd.

ASCO JAPAN Co., LtdKANEKO SANGYO CO., LTD

P & F

P & F

Makers

KFD2-SCD-Ex1. LK

Model No.

Exia ⅡC


Intrinsially Safe Explosion proof Barrer for E32M3 Series

Cable gland for E53M3 (Explosion Proof) Series

E53M3 (Explosion Proof) Electrical Wiring Closure PlugMakers

SBP-16-1/2NPT

Model No.

1/2 NPT

Connecting Threads

Makers

EXBM-16R- *Model No.

Exd ⅡC


1/2 NPT

Connecting Threads

Needle Valves

0.10.250.25

PartBody ABody B

DiscSpring


PEEKSUS316

■ Materials


99.9 MPa Line Check ValvesCheck Valves, Filters

99.9 MPa Compact Manual Valves

60,000 psi Type (40000 psi Type can also be manufactured.)

NominalDiameter D


A A1 L1 L2


InterfacialDistance

CvValueMAX.

B Ordering No.

6.35 9/16-18UNF3/4-16UNF

1 1/8-12UNF


708484

94116130

172230


9.5214.2

60,000 psi Type(Nominal Diameter:6.35,9.52),40,000 psi Type(Nominal Diameter:14.2)

1.21.4

1.11 1/8-12UNF (Left)9/16-18UNF 110 15630 UCL-7100-14.2-40-N28.5-CN14.2 2.71.3

Mass(approx.)

(kg)

UH-7100L-6.35-N28.5-CNUH-7100L-9.52-N28.5-CNUH-7100L-14.2-40-N28.5-CN

Ordering No.

Explosion-Proof accessores For Positioners

*: Please request necessary.

*: Please let us know the outer diameter of the cable to be used.


Lift 5

14.2

φ3

φ3

70 φ80

31（

31）

（62）

Full-o

pen H

eight （

123）

φ6

1 1/8-12UNF

（Left）9/16-18UNF

Collar

Nut

（23）Leak port

HEX. 30

Leak port

Flow direction

φ88

Nomin

al

Flow direction

Flow direction

L1

HEX.55(L2)

Nut CollarøD

AA1

Flow direction

ø60

HEX.B

ø3 (Leak port)

L1 A

φ45

A1(L2)

HEX. B

CollarNut

HEX. 41

φD

φ3(Leak port)

L1 A

φ45

A1(L2)

CollarNut

φ3(Leak port)

HEX. B

HEX. 41

φD

HEX.3

6

ø40

ø3.5φ6.35

ø12.5

ø4

(5.5)

8.5(2)

(9.8)

18.5

(60.8)

(87)

Nominal φ9.52

HEX.17

ø20

φ26.5

ø35

HEX.36

58° 9/16-18UNF

φ59.55

(11.9)

(3)(17

.2)

9/16-20UN

Flow d

irectio

n

UH-8100-14.2-40-N28.5-＊＊＊ (example)■ Ordering No.



50 MPa85 °C

−40 to +85 °C

■ Specifications

NominalDiameter

D


Cracking Pressure: Max of 6.86 kPaRange of Use



PartBody ABody BEnd AEnd B

ElementPacking


SUS316SUS316SUS316

PTFE


Design TemperatureFluid

Temperature Range

50 MPa85 °C−40 to+85 °C

*1: Filter particle size (in microns) goes here

NominalDiameter

D


A1A

Collar Threads(tube side) Ordering No.

6.35 7/16-20UNF9/16-18UNF13/16-16UN

(Left)1/4-28UNF(Left)3/8-24UNF(Left)9/16-18UN

UFL-750-6.35-*1-N28.5-CNUFL-750-9.52-*1-N28.5-CNUFL-750-14.2-*1-N28.5-CN

9.5214.2

L1 L2

InterfacialDistance

107107107

125125127

1.11.31.2

Mass(approx.)

(kg)B

141722

FeaturesFeatures1. Compact, in-line type2. Little pressure drop due to optimal flow pass3. Filter size from 2, 5 and 10 μm


95 MPa85 °C

■ Specifications (example)

URF-795-6.35-DSH (example)■ Ordering No.

FeaturesFeatures1. Compact and with Durable Manual Valves2. We will produce an interface with a container in the specified shape.



Temperature Range

99.9 MPa85 °C

Cv 0.85

−40 to+85 °C





Caution



Temperature Range

99.9 MPa85 °C−40 to+85 °C

D



1 1/8-12UNF (Left)9/16-18UNF UFL-7100-14.2-40-*1-N28.5-CN14.2 100 132 2.130



ElementPacking


SUS316SUS316SUS316

PTFE

■ Materials

99.9 MPa Filters 60,000 psi Type (40000 psi Type can also be manufactured.)

NominalDiameter


A1A


6.35 9/16-18UNF3/4-16UNF

1 1/8-12UNF



9.5214.2

L1 L2

InterfacialDistance

84100100

108132146

22.42.4

Mass(approx.)

(kg)B

172230

0.180.551.0

PartBody ABody B

DiscSpring


SUS316SUS316

■ Materials


50 MPa Line Check Valves


A A1 L1 L2


InterfacialDistance Cv値

0.91.11.0

Mass(approx.)

(kg)B Ordering No.

6.35 7/16-20UNF9/16-18UNF13/16-16UN


898989

107107109

141722


9.5214.2

PartsBody A

Disc

MaterialsSUS316LSUS316L

■ Materials (example)

This safety valves can be produced by any materials conforming to applicable standards.

Pressure Relief Device (PRD)

50 MPa Filters

Container Valves

PartBodyDiscStem


Handle


SUH660SUS316

PVDF+PFASUS316ADC12

■ Materials



Lift 5

14.2

φ3

φ3

70 φ80

31（

31）

（62）

Full-o

pen H

eight （

123）

φ6

1 1/8-12UNF

（Left）9/16-18UNF

Collar

Nut

（23）Leak port

HEX. 30

Leak port

Flow direction

φ88

Nomin

al

Flow direction

Flow direction

L1

HEX.55(L2)

Nut Collar

øD

AA1

Flow direction

ø60

HEX.B

ø3 (Leak port)

L1 A

φ45

A1(L2)

HEX. B

CollarNut

HEX. 41

φD

φ3(Leak port)

L1 A

φ45

A1(L2)

CollarNut

φ3(Leak port)

HEX. B

HEX. 41

φD

HEX.3

6

ø40

ø3.5φ6.35

ø12.5

ø4

(5.5)

8.5(2)

(9.8)

18.5

(60.8)

(87)

Nominal φ9.52

HEX.17

ø20

φ26.5

ø35

HEX.36

58° 9/16-18UNF

φ59.55

(11.9)

(3)(17

.2)

9/16-20UN

Flow d

irectio

n

UH-8100-14.2-40-N28.5-＊＊＊ (example)■ Ordering No.



50 MPa85 °C

−40 to +85 °C

■ Specifications

NominalDiameter

D


Cracking Pressure: Max of 6.86 kPaRange of Use




ElementPacking


SUS316SUS316SUS316

PTFE



Temperature Range

50 MPa85 °C−40 to+85 °C


NominalDiameter

D


A1A


6.35 7/16-20UNF9/16-18UNF13/16-16UN

(Left)1/4-28UNF(Left)3/8-24UNF(Left)9/16-18UN


9.5214.2

L1 L2

InterfacialDistance

107107107

125125127

1.11.31.2

Mass(approx.)

(kg)B

141722



95 MPa85 °C

■ Specifications (example)

URF-795-6.35-DSH (example)■ Ordering No.

FeaturesFeatures1. Compact and with Durable Manual Valves2. We will produce an interface with a container in the specified shape.



Temperature Range

99.9 MPa85 °C

Cv 0.85

−40 to+85 °C





Caution



Temperature Range

99.9 MPa85 °C−40 to+85 °C

D



1 1/8-12UNF (Left)9/16-18UNF UFL-7100-14.2-40-*1-N28.5-CN14.2 100 132 2.130



ElementPacking


SUS316SUS316SUS316

PTFE

■ Materials

99.9 MPa Filters 60,000 psi Type (40000 psi Type can also be manufactured.)

NominalDiameter


A1A


6.35 9/16-18UNF3/4-16UNF

1 1/8-12UNF


(Left)9/16-18UNF


9.5214.2

L1 L2

InterfacialDistance

84100100

108132146

22.42.4

Mass(approx.)

(kg)B

172230

0.180.551.0

PartBody ABody B

DiscSpring


SUS316SUS316

■ Materials


50 MPa Line Check Valves


A A1 L1 L2


InterfacialDistance Cv値

0.91.11.0

Mass(approx.)

(kg)B Ordering No.

6.35 7/16-20UNF9/16-18UNF13/16-16UN


(Left)9/16-18UNF

898989

107107109

141722


9.5214.2

PartsBody A

Disc

MaterialsSUS316LSUS316L

■ Materials (example)

This safety valves can be produced by any materials conforming to applicable standards.

Pressure Relief Device (PRD)

50 MPa Filters

Container Valves

PartBodyDiscStem


Handle


SUH660SUS316

PVDF+PFASUS316ADC12

■ Materials



Lift 5�l�U�~�P.�O ....

. .

.

(133)

22

Ă6.5

85

33(33

)

66

30

20

� 170(11

3)(62

)(25

6)(43

1)

6 x Φ3Leak port

HEX.3045

Φ42HEX.36

40(103)

Φ180

(298)

2 x 1・1/8-12 UNF

2 x 9/16-18 UNF(Left)

Rc 1/4

Threaded section length 10(Also on the other side)

2 x M8 x 1.25

Flow direction

4xM8x1.25

SUPPLY

4×M8×1.25Thread length 10

Flow directionAA1

(160)

(283)

(767)

(134)

φ220

45 45

16

(649)

75

（34）


CollarNut

AdaptercableOuter diameter φ11

6×φ3(Leak port)

65

(20)

(L)

φD 64

HEX.B

Flow direction

φ88

Lift（

7）

15

70

9/16-18UNF 45

2×φ3Leak port

(59)(33

)26

(94)

(400)

(44) HEX.17

(12) (12)

11.2

(9.7)φ6.5

φ2.4

φ4.3

60°

(Left)1/4-28UNF

9/16-18UNF-2B


Φ14.2

(After

outsid

e the

tube

)

PartsBodyDiscStem



SUS316+Ni-Cr alloySUH660

PVDF+PFASUS316

■ Materials

Ultra Low Temperature Valves for Liquefied Hydrogen (Automatic Operation Valves)

1. Capable of controlling ultra high-pressure liquefied hydrogen (Control range: ultra high-pressure of up to 99.9 MPa, ultra low temperature of down to -253°C)2. High-Flowrate (Cv value of 1.0)


99.9 MPa−253 to +50 °C

■ SpecificationsPartBodyDisc

Actuator

MaterialsXM-19

SUH660A5056, other

■ Materials

Ultra Low Temperature Valves for Liquefied Hydrogen (Manual Valves)

PartsBodyDisc

Handle

MaterialsXM19

SUH660ADC12

■ Materials

Manual Valves and Check Valves for low temperature are also available.

ULH-7100C-6.35-XM19-＊＊＊ (example)■ Ordering No.





Caution

FeaturesFeatures

−253 to +50 °C Fluid Temperature Range

FeaturesFeatures1. Allows control of ultra high-pressure hydrogen2. Also compatible with smart positioner (communications capable)

equipped types3. Smart positioner with communications functioncan be available.

Design PressureDesign TemperatureFluid Temperature

Range

99.9 MPa85 °C

−253 to +85 °C

■ Specifications



A A1


LCollar and nut


HEX.BCv

ValueMAX.

Ordering No.

1 1/8-12UNF (Left)9/16-18UNF 121 30 0.5 E32M2R2-7100CW-14.2-*-N28.5-CN14.2

9/16-20UNF (Left)1/4-28UNF 99 17 0.1 E32M2R2-7100CW-6.35-*-N28.5-CN6.353/4-16UNF (Left)3/8-24UNF 107 22 0.15 E32M2R2-7100CW-9.52-*-N28.5-CN9.52

D

FeaturesFeatures1. Allows control of ultra high-pressure hydrogen


Range

99.9 MPa50 °C

−253 to +50 °C

■ Specifications

C160-ULH-7100C-14.2-40-XM19-CN■ Ordering No.

Ultra Low Temperature Valves for Liquefied HydrogenUltra Low Temperature Valves for Liquefied Hydrogen (Automatic Operation Valves), 160-mm Cylinder Diameter, Long Axis Type


Lift 5�l�U�~�P.�O ....

. .

.

(133)

22

Ă6.5

85

33(33

)

66

30

20

� 170

(113)

(62)

(256)

(431)

6 x Φ3Leak port

HEX.3045

Φ42HEX.36

40(103)

Φ180

(298)

2 x 1・1/8-12 UNF

2 x 9/16-18 UNF(Left)

Rc 1/4

Threaded section length 10(Also on the other side)

2 x M8 x 1.25

Flow direction

4xM8x1.25

SUPPLY

4×M8×1.25Thread length 10

Flow directionAA1

(160)

(283)

(767)

(134)

φ220

45 45

16

(649)

75

（34）


CollarNut

AdaptercableOuter diameter φ11

6×φ3(Leak port)

65

(20)

(L)

φD 64

HEX.B

Flow direction

φ88

Lift（

7）

15

70

9/16-18UNF 45

2×φ3Leak port

(59)(33

)26

(94)

(400)

(44) HEX.17

(12) (12)

11.2

(9.7)φ6.5

φ2.4

φ4.3

60°

(Left)1/4-28UNF

9/16-18UNF-2B


Φ14.2

(After

outsid

e the

tube

)

PartsBodyDiscStem



SUS316+Ni-Cr alloySUH660

PVDF+PFASUS316

■ Materials

Ultra Low Temperature Valves for Liquefied Hydrogen (Automatic Operation Valves)

1. Capable of controlling ultra high-pressure liquefied hydrogen (Control range: ultra high-pressure of up to 99.9 MPa, ultra low temperature of down to -253°C)2. High-Flowrate (Cv value of 1.0)


99.9 MPa−253 to +50 °C

■ SpecificationsPartBodyDisc

Actuator

MaterialsXM-19

SUH660A5056, other

■ Materials

Ultra Low Temperature Valves for Liquefied Hydrogen (Manual Valves)

PartsBodyDisc

Handle

MaterialsXM19

SUH660ADC12

■ Materials

Manual Valves and Check Valves for low temperature are also available.

ULH-7100C-6.35-XM19-＊＊＊ (example)■ Ordering No.





Caution

FeaturesFeatures

−253 to +50 °C Fluid Temperature Range

FeaturesFeatures1. Allows control of ultra high-pressure hydrogen2. Also compatible with smart positioner (communications capable)

equipped types3. Smart positioner with communications functioncan be available.


Range

99.9 MPa85 °C

−253 to +85 °C

■ Specifications



A A1


LCollar and nut


HEX.BCv

ValueMAX.

Ordering No.

1 1/8-12UNF (Left)9/16-18UNF 121 30 0.5 E32M2R2-7100CW-14.2-*-N28.5-CN14.2

9/16-20UNF (Left)1/4-28UNF 99 17 0.1 E32M2R2-7100CW-6.35-*-N28.5-CN6.353/4-16UNF (Left)3/8-24UNF 107 22 0.15 E32M2R2-7100CW-9.52-*-N28.5-CN9.52

D

FeaturesFeatures1. Allows control of ultra high-pressure hydrogen


Range

99.9 MPa50 °C

−253 to +50 °C

■ Specifications

C160-ULH-7100C-14.2-40-XM19-CN■ Ordering No.

Ultra Low Temperature Valves for Liquefied HydrogenUltra Low Temperature Valves for Liquefied Hydrogen (Automatic Operation Valves), 160-mm Cylinder Diameter, Long Axis Type


φD1

L1HEX.B1

2×φ3(Leak port)

φD

(L2)

AA1Nut Collar

HEX.B

øD

Nut

CollarAA1

L1

C

φD1

B1(L2)

2×φ3(Leak port)

L1

C(L2

)

HEX.B

B1

3×φ3(Leak port)

NutCollar

A1A

φD1

φD

L1

L2

C

(L4)

(L3)

HEX.B

NutCollar

φD1

φD

L1B1

4×φ3(Leak port)

(L2)

L1(L2)

AA1

HEX.B

A

φD1

A1

L1

HEX.B1

2×φ3(Leak port)

φD

Nut Collar

(L2)

HEX.B

φD

NutCollar

AA1

L1

C

L1

C

φD1

B1

2×φ3(Leak port)

(L2)

(L2)

HEX.B

L1

NutCollar

φD1

AA1

φD

B1

3×φ3(Leak port)

L2

C

(L4)

(L3)

HEX.B

NutCollar

φD1

AA1

φDL1

L1B1

4×φ3(Leak port)

(L2)

(L2)

HEX.B

Fittings FittingsFeaturesFeatures

1. Metal seal construction, extremely airtight.2. No need to weld due to screwed to tube end.

Note: Please refer to No.5 on page 12-No.6 on page 13 for dimensions and precision of tube threading and cone machining.

SpecificationsSpecifications

Maximum operating pressure and temperature are changeable according to the materials and thickness of the tubes.Please contact before ordering.

UJUN Type (Max. Working Pressure 99.9 MPa Over)Coned-and-threaded Connection High-Pressure (HP) Type

■ Straight Union

■ Union Tees ■ Cross Union

■ Union Elbows

Body

6.359.5214.2

TubeOuter

DiameterNut Thread

ADUJUN-6.35CNUJUN-9.52CNUJUN-14.2CN

Ordering No.

9/18-18UNF3/4-16UNF1 1/8-12UNF

Tube Thread

A1(Left)1/4-28UNF(Left)3/8-24UNF(Left)9/16-18UNF

212938

L1 B

172230

Collar & Nut

HEX.B

A

φD

A1 Nut

Collar

L1 *: for Nominal diameter 14.2, we uses JIS-compliant materials.

PartsBodyNut

Collar


ASTM A276 316ASTM A276 316

**

TubeOuter

DiameterNut Thread

AD A1

Tube Thread

6.35 9/16-18UNF3/4-16UNF1•1/8-12UNF


9.5214.2

L1

405565

L2

6487111

D1

2.43.26.4

B

242738

B1

172230

Ordering No.

UJUN-F-6.35-N28.5-CNUJUN-F-9.52-N28.5-CNUJUN-F-14.2-40-N28.5-CN

TubeOuter

DiameterNut Thread

AD A1

Tube Thread

6.35 9/16-18UNF3/4-16UNF1•1/8-12UNF


9.5214.2

L1

455570

L2

6987116

D1

2.43.26.4

B

242738

B1

172230

Ordering No.

UJUN-X-6.35-N28.5-CNUJUN-X-9.52-N28.5-CNUJUN-X-14.2-40-N28.5-CN

D1

2.43.26.4

TubeOuter

DiameterNut Thread

AD A1

Tube Thread

6.35 9/16-18UNF3/4-16UNF1•1/8-12UNF


9.5214.2

C

34.54154

L1

22.527.535

L2

34.543.558

B

242738

B1

172230

Ordering No.

UJUN-L-6.35-N28.5-CNUJUN-L-9.52-N28.5-CNUJUN-L-14.2-40-N28.5-CN

L3

34.543.558

TubeOuter

DiameterNut Thread

AD A1

Tube Thread

6.35 9/16-18UNF3/4-16UNF1•1/8-12UNF


9.5214.2

C

34.54154

L1

455570

L2

22.527.535

L4

6987116

D1

2.43.26.4

B

242738

B1

172230

Ordering No.

UJUN-T-6.35-N28.5-CNUJUN-T-9.52-N28.5-CNUJUN-T-14.2-40-N28.5-CN

MaterialsMaterials

Note 1: Nominal diameter 6.35 and 9.52 are for the 60,000 psi type, and nominal diameter 14.2 is for the 40,000 psi type.

Note 2: A nominal diameter of 14.2 for the 60,000 psi type is also manufactured. Please specify your preference when ordering.

6.359.5214.2

TubeOuter

DiameterNut Thread

ADUJU-6.35CNUJU-9.52CNUJU-14.2CN

Ordering No.

7/16-20UNF9/16-18UNF13/16-16UN

Tube Thread

A1(Left)1/4-28UNF(Left)3/8-24UNF(Left)9/16-18UNF

9.212.218.5

D1 L1 L2 B

55.57

161821

141722

Coned-and-threaded Connection Medium Pressure (MP) TypeUJU Type (Max. Working Pressure 50 MPa)

■ Straight Union

■ Union Tees ■ Cross Union

■ Union Elbows

Body

Collar & Nut

φD

HEX.BL1 L2

φD1

ANut

Collar

A1

*: for Nominal diameter 9.52 and 14.2, we use JIS-compliant materials.

PartsBodyNut

Collar


SUS316ASTM A276 316 *

TubeOuter

DiameterNut Thread

AD A1

Tube Thread

6.35 7/16-20UNF9/16-18UNF13/16-16UN


9.5214.2

L1

354555

L2

536375

D1

2.83.57.5

B

141722

B1

192632

Ordering No.

UJU-F-6.35-N28.5-CNUJU-F-9.52-N28.5-CNUJU-F-14.2-N28.5-CN

TubeOuter

DiameterNut Thread

AD A1

Tube Thread

6.35 7/16-20UNF9/16-18UNF13/16-16UN


9.5214.2

L1

405162

L2

586982

D1

2.83.57.5

B

141722

B1

182026

Ordering No.

UJU-X-6.35-N28.5-CNUJU-X-9.52-N28.5-CNUJU-X-14.2-N28.5-CN

C

293644

TubeOuter

DiameterNut Thread

AD A1

Tube Thread

6.35 7/16-20UNF9/16-18UNF13/16-16UN


9.5214.2

L1

2025.531

L2

2934.541

D1

2.83.57.5

B

141722

B1

182026

Ordering No.

UJU-L-6.35-N28.5-CNUJU-L-9.52-N28.5-CNUJU-L-14.2-N28.5-CN

L4

586982

TubeOuter

DiameterNut Thread

AD A1

Tube Thread

6.35 7/16-20UNF9/16-18UNF13/16-16UN


9.5214.2

L1

405162

L2

2025.531

L3

2934.541

D1

2.83.57.5

C

293644

B

141722

B1

182026

Ordering No.

UJU-T-6.35-N28.5-CNUJU-T-9.52-N28.5-CNUJU-T-14.2-N28.5-CN

MaterialsMaterials

Caution All wetted parts of Valves, Unions and Fittings in this catalog should be with non-corrosive gases only.Caution All wetted parts of Valves, Unions and Fittings in this catalog should be with non-corrosive gases only.10 11

Download the latest catalog from "http://www.fujikin.co.jp/go/c10003".

5-7. Mechanical Finished Dimensions (Female Thread Side)

FittingTypes A L L1 D1 D2

6.35 12.7 7.120,000psi 4.87/16-20UNF

14.2 19 11.220,000psi 12.7

9.7

13/16-16UN

9.52

14.2

15.8 13.5

15.8

60,000psi 6.63/4-16UNF

9.52 15.8 9.720,000psi 7.99/16-18UNF

6.35

19.1

11.2 9.760,000psi

40,000psi

60,000psi

2.8

7.5

3.2

3.5

2.4

6.4

4.8

4.39/16-18UNF

1・1/8-12UNF

NominalDia.

1. Introduction1-1. Our stainless steel high pressure and medium pressure fittings are

carefully designed and manufactured, and subjected to strict quality control, down to the smallest detail utilizing the technical expertise we have built up over many years as precision fittings manufacturers, and we therefore ask that care be taken when installing and utilizing those products.

1-2. Any installation of piping utilizing stainless steel high pressure and medium pressure fittings should be carried out by a person or persons thoroughly familiar and experienced with those fittings.

1-3. Stainless steel high pressure and medium pressure fittings should not be used in locations subject to excessively repetitive conditions, vibrations, impacts, pulsations, etc.

1-4. Customers who will be repeatedly using the same product should inform when there is a change in usage condition or method in order to

avoid any problems before they arise.

2. Basic Structural Overview2-1. The fittings have concentrically conical-shaped body and tube seal sections

as well as a preciously finished surface, making them highly airtight coned-and-threaded-type fittings which also utilize a metallic seal method.

2-2. The basic structural components are comprised of a stainless steel body, collars, nuts and connecting tubes.

2-3. The sealing principle of the fittings involves tightening the nuts using a wrench, etc., to tightly affix the cone tip-processed tube to the body.

■ Fitting Structural Drawing

Fitting Component Parts Fitting Post-Installation Appearance

UJU-N28.5 Type

Body Collar Nut Tube

Tube Tip


UJUN-N28.5 Type

Body

Tube Tip

Collar Nut TubeBody Collar Nut Tube

5. Fitting Installation Guidelines (Installation guidelines are the same for UJUN and UJU)

5-4. Screw the tube and nut together into the fitting (valve) body.Then, put a match marking * on the body and the nut. This represents the zero point for tightening.(*: The red lines in the photograph)

5-5. Using a wrench, tighten the nut by a 1/8 - 1/6 turn from the zero point. (When tightening the nut, always make sure to hold the body in place.)

No further tightening is needed.

Tightening Torque (N•m)Nominal Diameter UJUN Type

High Pressure (HP) TypeUJU Type

Medium Pressure (MP) Type

6.35

9.52

14.2

21

43

90

14

25

40

5-1. Assemble the parts of the fitting according to each step as below. Perform cone processing of the tube tip according to the figure on the next page.

Tube

Nut

5-2. Put the nut onto the tube and then affix the threaded section of the tube tip to the collar. (The tube threading is left-handed. Please remember this when affixing.)Apply a small amount of fluorinated grease to the tube tip.

5-3. Screw the collar with your fingers until it cannot turn any further and one or two thread ridges are visible on the tube tip side.

Collar

5-6. Tube Tip Processing Dimensions

B

0.05 B

L1

øD1±

0.1

L+2 0

R0.2

59° 0° -1°

Ra0.8 A

φD

Tube Tip ProcessingDimensions Accessory Part No. *4

Required Min.Straight Tube

Length

*3FittingTypes(psi) A *2 Collar NutD1 L L1

6.35 3.6 8.8 3520,000 UJU-6.35C UJU-6.35N-EFP(Left)1/4-28UNF

14.2 10.3 12.7 5020,000 UJU-14.2C UJU-14.2N

UJUN-14.2C UJUN-14.2N

(Left)9/16-18UNF

9.52

14.2

5.6 19.1 50

70

60,000 UJUN-9.52C UJUN-9.52N(Left)3/8-24UNF

9.52 6.4 11.2 4020,000 UJU-9.52C UJU-9.52N-AFS(Left)3/8-24UNF

6.35 3.2

7.2

7.9

24

24

14.3 4060,000

40,000

60,000

UJUN-6.35C UJUN-6.35N(Left)1/4-28UNF

(Left)9/16-18UNF

NominalDiameter

D

*1: After cutting the tube with an appropriate tool, please perform tube tip as above to the above length.

*2: Regarding thread grade, processing should be performed at 2A or higher.

*3: When bending tube, please keep straight tube above length as L1 or more.

*4: If you use other parts, please consult with in advance.

*: Please consult with about coned-and-threaded machining also.

Piping Installation Guidelines Piping Installation Guidelines

3. Design Specifications3-1. Maximum Operating Pressure, Temperature Range

Medium pressure fitting (Part No.: UJU-N28.5): Max. 50 MPa, -40°C to +85°C *High pressure fitting (Part No.: UJUN-N28.5): Max. 110 MPa, -40°C - +85°C **: Varies according to the materials and thickness of the tubes used.

Please contact before ordering.3-2. Body Material SUS316+Co base alloy

4. Important Considerations for SelectionsIncorrect device selection and handling can lead to system problems and accidents. It is therefore important to fully consider the compatibility of devices with the systems in which they are used, as well as the conditions under which they are used, as the authority and responsibility for device selection left up to the customer. Also, it is important to have a full understanding of the specification range of a given device before utilizing it.

3-3. Nominal Diameter 6.35, 9.52, 14.23-4. Hydrogen gas and other gases and liquids which are non-corrosive to

stainless steel, and which are the primary constituent material, may be used.

6. Caution Regarding Installation6-1. Please use tubes and fittings without scratches in the tube end and

sealing area of fittings.6-2. After cutting the tube, please remove burr of the cut cross-section; also,

make sure the cross-section is at a right angle to the long axis of the tube.

7. Removal and Re-tightening Procedure7-1. To remove, use a wrench or other appropriate tool to turn the nut

half-rotations in a anti-clockwise direction.7-2. When re-tightening, the guidelines are exactly the same as those given

in Item 5.

Note 1: If you accidentally drop the fitting part, please check the body and tube seal section for scratches or any adhering material before using. If a scratch is discovered, please replace the part, because it will cause leakage.If adhering material is discovered, lightly wipe the part with a clean cloth until the material is completely removed.Do not use an organic solvent when cleaning, as this will also remove the lubricant from the seal section.

Note 2: Please make sure to use a suitable wrench to a hexagonal nut.

Note 3: When disassembling, please protect the sealing part of fittings to avoid scratch.

8. Caution After Piping8-1. After piping, check all sections again to ensure that joined sections are

not loose and that fittings are mounted in the prescribed manner.8-2. After the stainless steel high-pressure/medium-pressure fittings and tube

are joined, the person performing installation should conduct a final check of overall air-tightness.

8-3. If you change tube orientation after all joining has been completed, only do so after first loosening the nut.Adjusting the tube's orientation without first loosening the nut can scratch the fitting seal's surface.

8-4. When purging gas, ensure beforehand that the nut is not loose. Loosening the nut when the system is under high pressure can result in a sudden and dangerous venting of the liquid inside the system from the spaces between the body leak port and the nut and sleeve.

9. Troubleshooting HereProper installation of this fitting will ensure no leakage occurs; however, performing installation in locations where it is difficult to assemble and joins parts or which are at an extreme angle can, on rare occasions, result in leakage.In such cases, first release the pressure and then perform a 1/16th turn tightening. If this does not resolve the problem, release the pressure again, disassemble the fitting, check the body and tube tip seal surfaces for scratches or adhering material, and then re-tightening the fitting according to the guidelines.If a scratch is discovered, please replace the part, as not doing so could result in leakage.If adhering foreign matter is discovered, lightly wipe the part with a clean cloth until it is completely removed. Do not use an organic solvent or other agent when cleaning, as this will also remove the lubricant from the seal section.


（L1）

L

φD2

60°

A

φD1

φ3（Leak Port）


5-7. Mechanical Finished Dimensions (Female Thread Side)

FittingTypes A L L1 D1 D2

6.35 12.7 7.120,000psi 4.87/16-20UNF

14.2 19 11.220,000psi 12.7

9.7

13/16-16UN

9.52

14.2

15.8 13.5

15.8

60,000psi 6.63/4-16UNF

9.52 15.8 9.720,000psi 7.99/16-18UNF

6.35

19.1

11.2 9.760,000psi

40,000psi

60,000psi

2.8

7.5

3.2

3.5

2.4

6.4

4.8

4.39/16-18UNF

1・1/8-12UNF

NominalDia.

1. Introduction1-1. Our stainless steel high pressure and medium pressure fittings are

carefully designed and manufactured, and subjected to strict quality control, down to the smallest detail utilizing the technical expertise we have built up over many years as precision fittings manufacturers, and we therefore ask that care be taken when installing and utilizing those products.

1-2. Any installation of piping utilizing stainless steel high pressure and medium pressure fittings should be carried out by a person or persons thoroughly familiar and experienced with those fittings.

1-3. Stainless steel high pressure and medium pressure fittings should not be used in locations subject to excessively repetitive conditions, vibrations, impacts, pulsations, etc.

1-4. Customers who will be repeatedly using the same product should inform when there is a change in usage condition or method in order to

avoid any problems before they arise.

2. Basic Structural Overview2-1. The fittings have concentrically conical-shaped body and tube seal sections

as well as a preciously finished surface, making them highly airtight coned-and-threaded-type fittings which also utilize a metallic seal method.

2-2. The basic structural components are comprised of a stainless steel body, collars, nuts and connecting tubes.

2-3. The sealing principle of the fittings involves tightening the nuts using a wrench, etc., to tightly affix the cone tip-processed tube to the body.

■ Fitting Structural Drawing

Fitting Component Parts Fitting Post-Installation Appearance

UJU-N28.5 Type


Tube Tip


UJUN-N28.5 Type

Body

Tube Tip

Collar Nut TubeBody Collar Nut Tube

5. Fitting Installation Guidelines (Installation guidelines are the same for UJUN and UJU)

5-4. Screw the tube and nut together into the fitting (valve) body.Then, put a match marking * on the body and the nut. This represents the zero point for tightening.(*: The red lines in the photograph)

5-5. Using a wrench, tighten the nut by a 1/8 - 1/6 turn from the zero point. (When tightening the nut, always make sure to hold the body in place.)

No further tightening is needed.

Tightening Torque (N•m)Nominal Diameter UJUN Type

High Pressure (HP) TypeUJU Type

Medium Pressure (MP) Type

6.35

9.52

14.2

21

43

90

14

25

40

5-1. Assemble the parts of the fitting according to each step as below. Perform cone processing of the tube tip according to the figure on the next page.

Tube

Nut

5-2. Put the nut onto the tube and then affix the threaded section of the tube tip to the collar. (The tube threading is left-handed. Please remember this when affixing.)Apply a small amount of fluorinated grease to the tube tip.

5-3. Screw the collar with your fingers until it cannot turn any further and one or two thread ridges are visible on the tube tip side.

Collar

5-6. Tube Tip Processing Dimensions

B

0.05 B

L1

øD1±

0.1

L+2 0

R0.259

° 0° -1°

Ra0.8 A

φD

Tube Tip ProcessingDimensions Accessory Part No. *4

Required Min.Straight Tube

Length

*3FittingTypes(psi) A *2 Collar NutD1 L L1

6.35 3.6 8.8 3520,000 UJU-6.35C UJU-6.35N-EFP(Left)1/4-28UNF

14.2 10.3 12.7 5020,000 UJU-14.2C UJU-14.2N

UJUN-14.2C UJUN-14.2N

(Left)9/16-18UNF

9.52

14.2

5.6 19.1 50

70

60,000 UJUN-9.52C UJUN-9.52N(Left)3/8-24UNF

9.52 6.4 11.2 4020,000 UJU-9.52C UJU-9.52N-AFS(Left)3/8-24UNF

6.35 3.2

7.2

7.9

24

24

14.3 4060,000

40,000

60,000

UJUN-6.35C UJUN-6.35N(Left)1/4-28UNF

(Left)9/16-18UNF

NominalDiameter

D

*1: After cutting the tube with an appropriate tool, please perform tube tip as above to the above length.

*2: Regarding thread grade, processing should be performed at 2A or higher.

*3: When bending tube, please keep straight tube above length as L1 or more.

*4: If you use other parts, please consult with in advance.

*: Please consult with about coned-and-threaded machining also.

Piping Installation Guidelines Piping Installation Guidelines

3. Design Specifications3-1. Maximum Operating Pressure, Temperature Range

Medium pressure fitting (Part No.: UJU-N28.5): Max. 50 MPa, -40°C to +85°C *High pressure fitting (Part No.: UJUN-N28.5): Max. 110 MPa, -40°C - +85°C **: Varies according to the materials and thickness of the tubes used.

Please contact before ordering.3-2. Body Material SUS316+Co base alloy

4. Important Considerations for SelectionsIncorrect device selection and handling can lead to system problems and accidents. It is therefore important to fully consider the compatibility of devices with the systems in which they are used, as well as the conditions under which they are used, as the authority and responsibility for device selection left up to the customer. Also, it is important to have a full understanding of the specification range of a given device before utilizing it.

3-3. Nominal Diameter 6.35, 9.52, 14.23-4. Hydrogen gas and other gases and liquids which are non-corrosive to

stainless steel, and which are the primary constituent material, may be used.

6. Caution Regarding Installation6-1. Please use tubes and fittings without scratches in the tube end and

sealing area of fittings.6-2. After cutting the tube, please remove burr of the cut cross-section; also,

make sure the cross-section is at a right angle to the long axis of the tube.

7. Removal and Re-tightening Procedure7-1. To remove, use a wrench or other appropriate tool to turn the nut

half-rotations in a anti-clockwise direction.7-2. When re-tightening, the guidelines are exactly the same as those given

in Item 5.

Note 1: If you accidentally drop the fitting part, please check the body and tube seal section for scratches or any adhering material before using. If a scratch is discovered, please replace the part, because it will cause leakage.If adhering material is discovered, lightly wipe the part with a clean cloth until the material is completely removed.Do not use an organic solvent when cleaning, as this will also remove the lubricant from the seal section.

Note 2: Please make sure to use a suitable wrench to a hexagonal nut.

Note 3: When disassembling, please protect the sealing part of fittings to avoid scratch.

8. Caution After Piping8-1. After piping, check all sections again to ensure that joined sections are

not loose and that fittings are mounted in the prescribed manner.8-2. After the stainless steel high-pressure/medium-pressure fittings and tube

are joined, the person performing installation should conduct a final check of overall air-tightness.

8-3. If you change tube orientation after all joining has been completed, only do so after first loosening the nut.Adjusting the tube's orientation without first loosening the nut can scratch the fitting seal's surface.

8-4. When purging gas, ensure beforehand that the nut is not loose. Loosening the nut when the system is under high pressure can result in a sudden and dangerous venting of the liquid inside the system from the spaces between the body leak port and the nut and sleeve.

9. Troubleshooting HereProper installation of this fitting will ensure no leakage occurs; however, performing installation in locations where it is difficult to assemble and joins parts or which are at an extreme angle can, on rare occasions, result in leakage.In such cases, first release the pressure and then perform a 1/16th turn tightening. If this does not resolve the problem, release the pressure again, disassemble the fitting, check the body and tube tip seal surfaces for scratches or adhering material, and then re-tightening the fitting according to the guidelines.If a scratch is discovered, please replace the part, as not doing so could result in leakage.If adhering foreign matter is discovered, lightly wipe the part with a clean cloth until it is completely removed. Do not use an organic solvent or other agent when cleaning, as this will also remove the lubricant from the seal section.


（L1）

L

φD2

60°

A

φD1

φ3（Leak Port）


(L)

(Leak port)

HEX.B1

φD1

φD2

L2

L1

A

2 × φ3

HEX.B

Nut Collar

A1 A2

(Leak port)

HEX.B1

φD1

φD2

L2

L1

AA1

2 × φ3

A2

(L)

HEX.B

Nut Collar

16 25

51

φ2.1

φ4.6

φ7.2

φ3.2

HEX.309/16-18UNF

1•1/8-12UNF

SUS316+Co base alloy

: HRX19® sleeve can be also manufactured.

Adapters

Note: Please consult about different connections.

Male (HP) × Female (HP)

Male (HP) × Female (MP)

Male (HP) × Male (HP) (Different Diameter)

NominalDiameter

1

14.2

ThreadA

1•1/8-12UNF

1•1/8-12UNF

Body ThreadA1

9/16-18UNF

3/4-16UNF

Tube ThreadA2

(Left)1/4-28UNF

(Left)3/8-24UNF14.2

NominalDiameter

2

6.35

9.52

L

52

61

L1

40

45

L2

25

25

D1

7.9

7.9

D2

6.3

6.3

B

17

22

B1

30

30

Ordering No.

UJB-14.2HPX6.35HP-N28.5-CN

UJB-14.2HPX9.52HP-N28.5-CN

NominalDiameter

1

6.35

ThreadA

9/16-18UNF

3/4-16UNF

Body ThreadA1

7/16-20UNF

9/16-18UNF

Tube ThreadA2

(Left)1/4-28UNF

(Left)3/8-24UNF9.52

NominalDiameter

2

6.35

9.52

L

45

49

L1

36

40

L2

16

20

D1

3.2

5.6

D2

2.1

3.2

B

14

17

B1

21

24

Ordering No.

UJB-6.35HPX6.35MP-N28.5-CN

14.2 1•1/8-12UNF 13/16-16UN (Left)9/16-18UNF14.2 55 45 25 7.2 4.6 22 30 UJB-14.2HPX14.2MP-N28.5-CN

UJB-9.52HPX9.52MP-N28.5-CN

*: JIS-compliant materials are used for nominal diameter 14.2.

PartBodyNut

Collar


ASTM A276 316ASTM A276 316

**

Ordering No. UJN-14.2HPX6.35HP-N28.5

FeaturesFeatures

1. Metal seal construction makes it extremely airtight2. No need to weld due to screwed to tube end.

Note: Please refer to No.5 on page 10-No.6 on page 11 for dimensions and precision of tube threading and cone machining.


MaterialsMaterials


Caution All wetted parts of Valves, Unions and Fittings in this catalog should be with non-corrosive gases only.Caution All wetted parts of Valves, Unions and Fittings in this catalog should be with non-corrosive gases only.

■ ConstructionUPG®

Coned-and-threaded connection

Coned-and-threaded connection

■ Removability

Comparison with Coned-and-threaded connectionComparison with Coned-and-threaded connection

Even when the nut is loosened, the tip of the fitting seal is narrow and requires extra space to be removed.

Difficult to removeWhen nut is loosened...

Easy to remove

UPG®

High Performance Metal Gasket Fittings for Ultra High-Pressure Hydrogen Gas

UPG®

FeaturesFeatures1. Excellent Air Tightness

• The unique seal structure realizes excellent airtightness.• Metal gasket type with small load on pressure-resistant parts even when detaching is

repeated.2. Excellent Installation and Operability

• No need for an axial space for detaching the device when detaching / removing.• Construction instructions include rotation control and overtightening prevention mechanism.• Compared to coned-and-threaded joint, construction with low torque can be done.

3. Excellent Scalability• Excellent vibration proof is achieved by separating the part to be sealed and the part

receiving the external force.• Lineup includes two pressure series: 95 MPa and 50 MPa.

Coupling

NutSUS316Ag plating on threaded section to prevent thread gallingSUS316

Leak portExterior leak check hole installed

Sleeve

Retainer-equipped gasketSUS316L double-melted material standard

Pure RingPure Ring is used to prevent torsion and co-rotation, thereby further improving sealing strength.

ConstructionConstruction

The 14th Monozukuri Parts Grand Award Machine Parts Award

2017Thank you !

HRX 19® is a registered trademark of NIPPON STEEL CORPORATION.


*

*

(Leak port)

ØD1

HEX.B

LA

L

φD2

L1

φD3

φD1

*

6.359.5212.7

444

D12.62.62.6

D D2 L1 L0.20.20.2

0.90.90.9

APR-UM-745-6.35UPG-N28.5APR-UM-745-9.52UPG-N28.5APR-UM-745-12.7UPG-N28.5

L23.95.48

0.70.70.7

1011

12.8

53.455.459

A7/16-20UNF9/16-20UN3/4-20UNEF

*1：Please select when using Coupling.

Ｌ

(122

)

φD26

(89)

12.5

Rc1/8

2×M5×0.8Support Thread

Depth 6

A

φD

1

L2

L1

φ70

L 55

4xø3

φ146

(H1)

(H2)

(13.

9)

(200

)

L2

φD

1 52

(274

)

(288

)

L1

A


UPG®

50 MPa Type

Pressure RangeTemperature RangeNominal Diameter

Main Materials

Vacuum - 50 MPa-45 to +85 ˚C

6.35, 9.52, 12.7Wetted Parts SUS316+Co base alloy

Specifications and MaterialsSpecifications and Materials

6.359.529.5212.712.7

UPG-6.35S-L23-50M-N28.5UPG-9.52S-L31-50M-N28.5UPG-9.52S-L38-50M-N28.5UPG-12.7S-L33-50M-N28.5UPG-12.7S-L44-50M-N28.5

D13.95.45.488

D2

9.81313

17.717.7

D3

2331383344

L

0.70.70.70.70.7

L1 Ordering No.NominalDiameter

6.359.5212.7

NominalDiameter

UPG-6.35N-50MUPG-9.52N-50MUPG-12.7N-50M

7/16-20UNF9/16-20UNF3/4-20UNEF

A

6.59.712.9

D1

141722

B

17.519.523

L Ordering No.

6.359.5212.7

NominalDiameter

UPG-C-6.35UPG-C-9.52UPG-C-12.7

7/16-20UNF9/16-20UNF3/4-20UNEF

A

6.59.67

12.85

D

141722

B

13.515

18.8

L Ordering No.

Automatic Valves with UPG® FittingsFeaturesFeatures

1. Fittings are installed without load for surrounding piping by adopting unique metal gasket-type.

φ146

(232

) (257

)(H

2)

49

L1

L2L

φD

2

φD

1

(H1)

A

Flow direction

Flow direction

Flow direction

6.359.5212.7

Nominal Diameter

2.83.26

D1

Connection Thread

D2 L1 LA

Interfacial Distance

181818

383838

H1 H2

0.150.150.5

444

M3R4-750-6.35UPG-N28.5M3R4-750-9.52UPG-N28.5M3R4-750-12.7UPG-N28.5

Cv ValueMAX.

Mass (approx.)

(kg)Ordering No.

L23.95.48

0.830.830.83

1011

12.8

7/16-20UNF9/16-20UN3/4-20UNEF

858790




Temperature Range

50 MPa85 °C

−40 to +85 °C


Gland PackingO-ring


SUS316PFA+PVDF

HNBR

■ Materials

Nominal Diameter

Connection Thread Interfacial Distance

Cv ValueMAX.

Mass (approx.)

(kg)Ordering No.




Temperature Range

45 MPa80 °C

−10 to +80 °C

PartsBody

Disc PackingStem

Gland PackingO-ring


PEEKSUS316 (Au Plating)

PTFEHNBR

■ Materials

6.359.5212.7

Nominal Diameter

3.24.35

6

D1

Connection Thread

L1 LA


45.945.945.9

505050

H1 H2

0.10.250.25

6.66.66.6


Cv ValueMAX.

Mass (approx.)

(kg)Ordering No.

L20.70.70.7

1011

12.8

7/16-20UNF9/6-20UN3/4-20UNEF

9597100




Temperature Range

95 MPa85 °C

−40 to +85 °C

PartsBodySeatStem

Gland PackingO-ring


PVDF+PFAHNBR

■ Materials

Orifice Diameter

95 MPa Type

50 MPa Type

45 MPa Type





Caution

6.359.5212.7

UPG-6.35GUPG-9.52GUPG-12.7G

7.510.914.9

D2

9.812.9517.65

D3

4.47.510.2

D1

1.961.961.96

L

2.482.882.88

L1


2017Thank you !

*

■ Nut

■ Gasket

■ Sleeve

L1

L

φD3

φD1

φD2

■ Dimensional Drawings

■ 50 MPa Coupling Body

ØD

L

HEX.B

A

17Download the latest catalog from "http://www.fujikin.co.jp/go/c10003".

16

Ordering No.NominalDiameter

(Leak port)

ØD1

HEX.B

LA

L

φD2

L1

φD3

φD1

*

6.359.5212.7

444

D12.62.62.6

D D2 L1 L0.20.20.2

0.90.90.9

APR-UM-745-6.35UPG-N28.5APR-UM-745-9.52UPG-N28.5APR-UM-745-12.7UPG-N28.5

L23.95.48

0.70.70.7

1011

12.8

53.455.459

A7/16-20UNF9/16-20UN3/4-20UNEF

*1：Please select when using Coupling.

Ｌ

(122

)

φD26

(89)

12.5

Rc1/8

2×M5×0.8Support Thread

Depth 6

A

φD

1

L2

L1

φ70

L 55

4xø3

φ146

(H1)

(H2)

(13.

9)

(200

)

L2

φD

1 52

(274

)

(288

)

L1

A


UPG®

50 MPa Type

Pressure RangeTemperature RangeNominal Diameter

Main Materials

Vacuum - 50 MPa-45 to +85 ˚C

6.35, 9.52, 12.7Wetted Parts SUS316+Co base alloy

Specifications and MaterialsSpecifications and Materials

6.359.529.5212.712.7

UPG-6.35S-L23-50M-N28.5UPG-9.52S-L31-50M-N28.5UPG-9.52S-L38-50M-N28.5UPG-12.7S-L33-50M-N28.5UPG-12.7S-L44-50M-N28.5

D13.95.45.488

D2

9.81313

17.717.7

D3

2331383344

L

0.70.70.70.70.7

L1 Ordering No.NominalDiameter

6.359.5212.7

NominalDiameter

UPG-6.35N-50MUPG-9.52N-50MUPG-12.7N-50M

7/16-20UNF9/16-20UNF3/4-20UNEF

A

6.59.7

12.9

D1

141722

B

17.519.523

L Ordering No.

6.359.5212.7

NominalDiameter

UPG-C-6.35UPG-C-9.52UPG-C-12.7

7/16-20UNF9/16-20UNF3/4-20UNEF

A

6.59.67

12.85

D

141722

B

13.515

18.8

L Ordering No.

Automatic Valves with UPG® FittingsFeaturesFeatures

1. Fittings are installed without load for surrounding piping by adopting unique metal gasket-type.

φ146

(232

) (257

)(H

2)

49

L1

L2L

φD

2

φD

1

(H1)

A

Flow direction

Flow direction

Flow direction

6.359.5212.7

Nominal Diameter

2.83.26

D1

Connection Thread

D2 L1 LA


181818

383838

H1 H2

0.150.150.5

444


Cv ValueMAX.

Mass (approx.)

(kg)Ordering No.

L23.95.48

0.830.830.83

1011

12.8

7/16-20UNF9/16-20UN3/4-20UNEF

858790




Temperature Range

50 MPa85 °C

−40 to +85 °C


Gland PackingO-ring


SUS316PFA+PVDF

HNBR

■ Materials

Nominal Diameter

Connection Thread Interfacial Distance

Cv ValueMAX.

Mass (approx.)

(kg)Ordering No.




Temperature Range

45 MPa80 °C

−10 to +80 °C

PartsBody

Disc PackingStem

Gland PackingO-ring


PEEKSUS316 (Au Plating)

PTFEHNBR

■ Materials

6.359.5212.7

Nominal Diameter

3.24.35

6

D1

Connection Thread

L1 LA


45.945.945.9

505050

H1 H2

0.10.250.25

6.66.66.6


Cv ValueMAX.

Mass (approx.)

(kg)Ordering No.

L20.70.70.7

1011

12.8

7/16-20UNF9/6-20UN3/4-20UNEF

9597100




Temperature Range

95 MPa85 °C

−40 to +85 °C

PartsBodySeatStem

Gland PackingO-ring


PVDF+PFAHNBR

■ Materials

Orifice Diameter

95 MPa Type

50 MPa Type

45 MPa Type





Caution

6.359.5212.7

UPG-6.35GUPG-9.52GUPG-12.7G

7.510.914.9

D2

9.812.9517.65

D3

4.47.5

10.2

D1

1.961.961.96

L

2.482.882.88

L1


2017Thank you !

*

■ Nut

■ Gasket

■ Sleeve

L1

L

φD3

φD1

φD2

■ Dimensional Drawings

■ 50 MPa Coupling Body

ØD

L

HEX.B

A

17Download the latest catalog from "http://www.fujikin.co.jp/go/c10003".

16

Ordering No.NominalDiameter

6.359.5212.7

B

3.24.35

6

D L1 L2 A1.31.32.2

104106115

464660

0.250.250.83

UCL-795-6.35UPG-N28.5UCL-795-9.52UPG-N28.5UCL-795-12.7UPG-N28.5

L0.70.70.7

1011

12.8

7/16-20UNF9/16-20UN3/4-20UNEF

6.359.5212.7

3.24.35

6

D13.266

D L1 L H L3 D2131919

192626

222626

535757

141515

394242

202626

333131

354040

0.220.470.75

1.01.01.0

UH-795L-6.35UPG-N28.5UH-795L-9.52UPG-N28.5UH-795L-12.7UPG-N28.5

L20.70.70.7

1011

12.8

7079.483

113.5131131

555

588888

H2B2B1B H1 H3 H5H4 L4A

7/16-20UNF9/16-20UN3/4-20UNEF

9.7

L

(H4)

H5

H1

(H2)

H3

(H)

38

φD

φD2

L4

2xφ5.6HEX.B1

(L3)

HEX.B2

φD

1

L1L2

A

HEX.B

2xM4x0.7

φ3

(L)

A

φ65

L2

L1

D

HEX. B

Manual Valves with UPG® Fittings

■ Specifications

6.359.5212.7

Nominal Diameter

2.83.26

D13.23.26

D

Nut connectionOrifice Diameter

D2 L1 L H L3 D3


Full-open Height Lift Handle

Diameter

262626

515157

12.512.515

B H1 H2

0.180.230.85

0.70.70.85

UH-750L-6.35UPG-N28.5UH-750L-9.52UPG-N28.5UH-750L-12.7UPG-N28.5

Cv ValueMAX.

Cv ValueMAX.

Mass (approx.)

(kg)Ordering No.

L23.95.48

0.70.70.7

1011

12.8

717378

113113121

555

585868

38.538.542

H3

18.518.526

H4

32.532.531

H5Thread

A7/16-20UNF9/16-20UN3/4-20UNEF

Nominal diameter 12.7 disc shapeFlow direction

øD L1L2

L

øD1

øD2

(H4)

H5

H1

(H)

øD3

(L3)

B

A

2×ø5.62×M4×0.7

9.7

HEX.22

35

(H2)

H3

HEX.13

ø3Leak port





50 MPa85 °C

−40 to +85 °C



Temperature Range

95 MPa85 °C

−40 to +85 °C

PartsBodyDiscStem


Handle


SUH660SUS316

PVDF+PFASUS316ADC12

■ Materials

Cv ValueMAX.

Mass (approx.)

(kg)Ordering No.Nominal

DiameterNut connectionOrifice

DiameterInterfacial Distance

Full-open Height Lift Handle

DiameterThread

Flow direction Nominal diameter 9.52 12.7 disc shape

95 MPa Type

50 MPa Type

95 MPa Type

50 MPa Type

Line Check Valves with UPG® Fittings


50 MPa85 °C

PartsBody ABody B

DiscSpring


SUS316

(L1)

ø50

L2

L3

D

A

HEX.46

Flow direction

Flow direction

■ Materials


PartsBody ABody B

DiscSpring


PEEKSUS316

■ Materials


■ Specifications

6.359.5212.7

Nominal Diameter

3.95.48

D

Nut connection Thread

L2 L3 A1

1.11.1

878993

UCL-750-6.35UPG-N28.5UCL-750-9.52UPG-N28.5UCL-750-12.7UPG-N28.5

Mass (approx.)

(kg)

Mass (approx.)

(kg)

Interfacial Distance Ordering No.

Ordering No.

L11011

12.8

0.70.70.7

7/16-20UNF9/16-20UN3/4-20UNEF

FeaturesFeatures1. Compact, in-line type2. Little pressure drop to optimal flow pass

FeaturesFeatures1. Compact, in-line type2. Little pressure drop to optimal flow pass

Fluid Temperature Range −40 to +85 °C


95 MPa85 °C

■ Specifications

Fluid Temperature Range −40 to +85 °C

Interfacial DistanceNominal

DiameterNut connection Thread

Leak port

PartsBodyDiscStem


Handle


SUH660SUS316

PVDF+PFASUS316ADC12

■ Materials

Cracking Pressure: max. 6.86 KPaRange of Use

Flow Vol.: min. 40 m3/H (Normal)Differential Pressure (Counter Pressure): min. 10 MPa





Caution Download the latest catalog from "http://www.fujikin.co.jp/go/c10003".

18 19

Flow direction

HEX.55(L)

L1

L2

D1

φ60

A

9/16-18UNF HEX.17 9/16-20UN

33.4

φ2.

1

φ3.

2

11

0.7

16

59°

■UPG-H-9.52X6.35HP-95M-N28.5 ■UPG-H-9.52X9.52HP-95M-N28.5

■UPG-H-9.52X14.2HP-95M-N28.5 ■UPG-H-12.7X14.2HP-95M-N28.5

3/4-16UNF HEX.22 9/16-20UN

37.4

φ3.

2φ

5.6

φ16

.4

11

59°

0.7

20

1･1/8-12UNF HEX.30

9/16-20UN

0.7

59°

46

1125

φ6.3

φ7.

9

φ25 φ5.

4

1･1/8-12UNF HEX.303/4-20UNEF

0.7

59°

47.8

12.825

φ6.

3

φ7.

9

φ25



50 MPa85 °C

−40 to +85 °C

PartsBody ABody BEnd AEnd B

ElementPacking


SUS316SUS316SUS316

PTFE

■ Materials

*: Filter particle size (in microns) goes here

6.359.5212.7

Nominal Diameter

3.95.48

D


L2 L3 A1.11.21.2

929497

UFL-750-6.35UPG-*-N28.5UFL-750-9.52UPG-*-N28.5UFL-750-12.7UPG-*-N28.5

Mass (approx.)

(kg)


L11011

12.8

0.70.70.7

7/16-20UNF9/16-20UN3/4-20UNEF


*: Filter particle size (in microns) goes here

6.359.5212.7

Nominal Diameter

3.24.35

6

D1


L1 L2 A2.02.02.0

110112108

UFL-795-6.35UPG-*-N28.5UFL-795-9.52UPG-*-N28.5UFL-795-12.7UPG-*-N28.5

Mass (approx.)

(kg)


L0.70.70.7

1011

12.8

7/16-20UNF9/16-20UN3/4-20UNEF


■ Specifications

FeaturesFeatures1. Compact, in-line type2. Little pressure drop to optimal flow pass3. Filter size from 2, 5 and 10 μm



95 MPa85 °C

−40 to +85 °C

PartsBody ABody BEnd AEnd B

ElementPacking


SUS316SUS316SUS316

PTFE

■ Materials

■ Specifications

FeaturesFeatures1. Compact, in-line type2. Little pressure drop to optimal flow pass3. Filter size from 2, 5 and 10 μm

Filters with UPG® Fittings

Note: Please consult about different connections.

Various Change Couplers for UPG®

SUS316+Co base alloy



MaterialsMaterials

9/16-18UNF HEX.17 9/16-20UN

33.4

φ2.

1

φ3.

2

11

0.7

16

59°

■ UPG-H-9.52X6.35HP-N28.5 ■ UPG-H-9.52X9.52HP-N28.5

■ UPG-H-9.52X14.2HP-N28.5 ■ UPG-H-12.7X14.2HP-N28.5

3/4-16UNF HEX.22 9/16-20UN

37.4

φ3.

2φ

5.6

φ16

.4

11

59°

0.7

20

1･1/8-12UNF HEX.30

9/16-20UN

0.7

59°

46

1125

φ6.

3

φ7.

9

φ25 φ5.

4

1･1/8-12UNF HEX.303/4-20UNEF

0.7

59°

47.8

12.825

φ6.

3

φ7.

9

φ25

UPG® × Coned-and-Threaded Connection (HP) Male Type

UPG® × Coned-and-Threaded Connection (HP) Male Type95 MPa Type

50 MPa Type

Caution All wetted parts of Valves, Unions and Fittings in this catalog should be with non-corrosive gases only.

95 MPa Type

50 MPa Type



Caution20 21Download the latest catalog from "http://www.fujikin.co.jp/go/c10003".

(L1)

A

L2

D

L3

Flow direction

φ45

HEX.41

To contribute to preservation of law and order, safety and stable driving of hydrogen related equipment, also works on substantiality of customer service aggressively.

*

ESUSOC(abbreviations: Engineering Services Unit Solutions Company)

can provide customer support in all aspects from design to production, launching, modification and maintenance, utilizing No.1 capability and experience of

flow control technology and high pressure gas certification.

Engineering services, equipment/piping design and production

Outsource order

Unit

- Layout design- Piping drawing- Procurement of processed parts, materials and purchased items.- Assembly- Cleaning and inspection

Prefabricating

MaintenanceLocal Construction

- Piping drawing- Procurement of materials and purchased items- Manufacture- Flush and inspection - Qualification

Control system, system design and manufacture also

Prefabricated Piping Production

Moisture Generator System

Flow Control Problem Solutions

MG Series for GAS ML Series for Liquid/ Double action typefor Gas

JHP Series: MG, ML Series:

0.7MPa Operating Air pressure whichi is available in any plant move the PISTON.

Discharge high pressure continuously 150MPa (N2 GAS) 500MPa (Liquid) 3 series(Model:JHP, MG, ML)

JHP series: Small body, companct (for Intermittent drive)

MG, ML series: for continuous drive

WHAT is PROVIDER?

PROVIDER series kept responding to the customer’s needs, and the rich product line-up is made even.

Products Line Up

APPLICATION

Features

● Pressure Set:Once you set operation pressure between 0.1 – 0.7 MPa, automaticaly max. pressure is availavle.

● Explosion Proof:as only air is use.

● Wetted parts: Suitable material & oil free type is available.

● Double action cylinder: discharge big volume outlet.

● Stable Action:Balancing of Inlet & outlet pressure keeps set pressure. No trouble against over load

● Low Noise Drive:This system uses only air and use no motor. Silencer reduce the air vent noise.

● Low Price:because of no motor like compressor type.

Specifications

Caution

Please use in the room of temperature 5 - 40℃.

*： Even more hotness is sometimes practicable by the gas kind, so please consult

Small, Compact, for intermittent drive. For continuous drive, (Oil free, for liquid, etc.)

for Liquid

POWER UNIT

PROVIDER is using widely by the high performance beyond the expectation.

Provider

Power unit

Equipped with all functions necessary to operating PROVIDER.

Provider, Air-regurator, Air-filter, Pressure gauge, Exaust & Inlet pressure control valves, strainer.

Power unit includes all necessary equipments to produce high pressure like:

Compact ! Light Weight! Transportable !

Typical Use Exanple

● Test under high pressure safety regulation for tank, pressure

registant, air tightness, destructive test.

● For test of plant piping, instrumentation line pressure registant,air tightness.

● As test equipment for plant pressure gauge, bourdon gauge.

● For molding bellows, valve.

● For oil pressure equipment.

● For high pressure boost.

Gases :Air, N2, He, H2, O2, others

Liquids :Water, Oil, Organic Solvent,

(MNP, Methanol), etc.

When it’s for gases besides Air and N2, it’ll be the different

specification, so please consult

.

Fluid

Max. Discharge Pressure(MPa) Operating Temperature(℃)

500 (Liquid)

150 (N2 Gas)

Please contact us if you need other type of gases.

5 - 40

Download the latest catalog from "http://www.fujikin.co.jp/go/c10003".22 23

PG PT

● Manual valve: 2 sets → Manifold type　● Hi-press. fitting： 2 pcs → 0 pce● Hi-press. piping： 5 pcs → 2 pcs adapter● Connection part： 10 → 4● Fitting construction part： 10 → 4● Tightness test： 10 → 4

● Hi-press. piping： 1 → 0● Fitting construction： 2 → 1● Tightness test： 2 → 1

PT

Piping example ①

Advantage

Flow chart Flow chart

Packaging before After Packaging before After

contributes to security and safety and securityof the instruments.

and joint proposal. NAGANO KEIKI co.,LTD.

Reduced

Reduced

We can propose packaged products of instrumentation piping for Hydrogen station and etc..

Integrated Solutions

CompactnessReduced

number ofparts

ConnectPoint

reduction

Reducednumber of

works

Piping example ②

(abbreviations: Engineering Services Unit Solutions Company)

If you have trouble with unit or piping, please contact local of�ce by all means !

can respond to customers’ request in various system including Integrated Gas System, Moisture Generator System, static mixer-dispending unit, prefabricated piping and etc., utilizing our extensive manufacturing experiences and flow control technology in each industry that we’ve cultivated so far.

Rich manufacturing experience and cutting edge technology

Please be free to contact for production or sales of systems utilizing some elements based on customer’s technology.

Flow Control Problem Solutions Company

ESUSOC

Valve Unit Featuring UPG® Fittings for Hydrogen Station’s Accumulator

◆Original seal structure realizes excellent airtightness.◆Metal gaskets minimize loads on pressure-resistant parts even if attached and detached repeatedly.

Weld Fitting

Manifold valve

Accumulator unit (example)

Accumulatorunit (example)

Conventionally required piping space can be reduced. (example)(70% reduction or more in volume)

Feature 1

Feature 2

Feature 3

Use of UPG® joints provides the following benefits.

Use of welded joints and manifold valves has reduced the number of connections and the overall unit size.

Prefabricated structures enable the construction of the unit in a factory without considering the number of accumulators (number of banks).

1. Excellent airtightness

◆Seal sections are separated from sections subject to external force to realize superb vibration resistance.

3. Excellent extendibility

◆Space for the removal of equipment in axial direction is not necessary for assembly or disassembly.◆Installation is as easy as managing rotation. Overtightening prevention mechanism is built in.◆Installation requires less tightening torque than when coned-and-threaded connection is used.

2. Easy installation and operation

Download the latest catalog from "http://www.fujikin.co.jp/go/c10003".24 25

Cv Value Calculation

■ Cv Value Calculation

Cv Value calculation provides the standard used in valve selection; so, please use as a reference value.It is possible that fixed piping conditions, usage conditions or other factors can cause actual values to differ from calculated values.

What is Cv Value?

Please confirm the necessary Cv Value suited to the intended use (process valves, meter master valves, etc.) before selecting an appropriate valves. Also, if there is a large difference between the flow channel diameter and piping diameter, please multiply the Cv value for the valve unit by revising coefficient Fp to determine the revised Cv Value (CvR).

Cv Value is a capacity coefficient for valves and other devices. It is defined in the Japanese Industrial Standards (JIS) as "the flow volume expressed in US gal/min of clear water at 60°F (15°C) through a valve within a particular operating range with a pressure differential of 1 lb/inch2 (= 1 psi)."

*1: For liquids, if kinematic viscosity is 20 mPa·s or more and calculated Cv value is 0.01 or less, viscosity correction calculation is required. Please contact Fujikin if fluid specifications are needed for viscosity correction.

*2: Please use pressure in the immediate proximity of the valve. Calculations using pressure from a point distant from the valve can produce significant errors due to the effects of piping pressure loss, etc.

Fluid

Liquid

Steam

Gas

General Same as left

Explanation of Symbols

QL [m3/h]: Liquid flow volumeQG [m3/h(normal)]: Gas flow volume in normal state (15°C, 0.1013 MPa abs)QS [kg/h]: Steam flow volumeP1 [MPa abs]: Primary side absolute pressure *2P2 [MPa abs]: Secondary side absolute pressure *2KV: Viscosity correction factor *1t [°C]: Fluid temperatureGL: Fluid specific gravity (water = 1)GG: Gas specific gravity (air = 1)S [°C]: Steam superheated temp.X: Dry steam temp. (dry saturated vapor X = 1)

Same as left

SaturatedWaterVapor

HeatedWaterVapor

WetSteam

HighViscosity

*1

Differential Pressure Conditions

ImportantNote

MEMO


MEMOMEMO


CAT: No.100-03E-F

2020 edition valves & fittings for ultra high …high pressure type upg®fittings union tees...

Documents