2018...2018 do-it-yourself projects guide pavers - slabs - walls - curbs...

2018DO-IT-YOURSELF PROJECTS GUIDE PAVERS - SLABS - WALLS - CURBS

Générique_Cat2018_QC_ENG.indd 1Générique_Cat2018_QC_ENG.indd 1 2018-02-15 08:552018-02-15 08:55

2

DOMINO SLAB


14 23

33

31

3

2018 NEW ARRIVALS

WEEK-END PROJECT IDEAS . . . . . . . . . . . . . . . . . . . . .04

SKYLINE WALL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

TOWNSEND WALL AND CURBS . . . . . . . . . . . . . . . . . . . 11

PODIA STEP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

MINI-KENDO SLABS . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

SLABS

SARANAK SLABS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

KENDO SLABS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

QUADRAL SLABS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

PORTAGE STEPPING STONE . . . . . . . . . . . . . . . . . . . . . 17

DOMINO SLABS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

PATIO+ SLABS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

ECONO SLABS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

WALLS

JASPER WALL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

NATURAL IMPRESSION CAP . . . . . . . . . . . . . . . . . . . . . .21

BELTIS TUMBLED WALL . . . . . . . . . . . . . . . . . . . . . . . .22

MINI-BELTIS WALL . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

BELTIS FIRE PIT KIT . . . . . . . . . . . . . . . . . . . . . . . . . . .24

COUNTRY WALL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

OLD FORGE WALL . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

UNIVERSAL SLOPE BLOCK . . . . . . . . . . . . . . . . . . . . . .27

PLANTER WALL BLOCK . . . . . . . . . . . . . . . . . . . . . . . . .28

PAVERS

HERITAGE UNIVERSAL PAVERS . . . . . . . . . . . . . . . . . . .30

DOMINO 50 PAVERS . . . . . . . . . . . . . . . . . . . . . . . . . . .31

CURBS

STRATUS CURB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

SCALLOPED CURBS . . . . . . . . . . . . . . . . . . . . . . . . . . .33

UNIVERSAL CURB . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

DEK-BLOCK / DEC-OR-POST / PLASTIC CURB . . . . . . . .35

DEK-BLOCK OPTI . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

CONSTRUCTION BLOCKS . . . . . . . . . . . . . . . . . . . . . . .38

INSTALLATION SUPPORT

CALCULATE YOUR PROJECT - WALLS . . . . . . . . . . . . . .39

INSTALLATION GUIDE - WALLS . . . . . . . . . . . . . . . . . . .40

INSTALLATION GUIDE - PAVERS AND SLABS . . . . . . . . .42

CALCULATE YOUR PROJECT - PAVERS AND SLABS . . . .43

INSTALLATION GUIDE - CURBS . . . . . . . . . . . . . . . . . . .44

FREQUENTLY ASKED QUESTIONS . . . . . . . . . . . . . . . . .45

SPECIAL FEATURES OF INSTALLATION . . . . . . . . . . . . .47

PLEASE NOTE:

THE COLOURS OF THE PRODUCTS SHOWN IN THIS CATALOGUE ARE

AS ACCURATE AS THE PHOTOGRAPHS AND PRINTING PROCESS WILL

ALLOW. SINCE ALL PERMACON PRODUCTS ARE MADE FROM NATURAL

MATERIALS, SUCH AS SAND AND STONE THAT MAY CHANGE OVER

TIME, COLOUR AND TEXTURE VARIATIONS ARE TO BE EXPECTED.

WE STRONGLY RECOMMEND THAT YOU MAKE YOUR FINAL COLOUR

SELECTION BASED ON A CURRENT PRODUCT SAMPLE RATHER THAN

EXISTING PROJECTS OR THE PHOTOGRAPHS SHOWN HERE.

IN ORDER TO SIMPLIFY THE SELECTION PROCESS, THE SAME COLOUR

NAME MAY BE FOUND IN VARIOUS PRODUCTS. THIS IS MEANT TO

COORDINATE PRODUCTS WITH SIMILAR COLOUR TONES, AND DOES

NOT IMPLY PRECISE COLOUR MATCHING.


4

Week-endProject Ideas

Skyline Wall [see page 10]

Townsend Wall [see page 11]


5

Visit permacon.ca to download your project installation guide.

#mypermaconproject

Jasper Wall [see page 21]

Planter Wall Block [see page 28]


1

2

3

4

PLAN YOUR PROJECTAny project will be better visualized with a well thought out plan. It will also make it easier to correctly estimate materials needed.

CHOOSE YOUR PRODUCTSYou’ll surely fi nd in the Modulo product line, those that offer the look and features you’re looking for. The following pages will help you make a selection.

ESTIMATE QUANTITIESWith your measurements in hand, use our simple formulas to determine how much material you’ll need. It’s easy, you’ll see.

INSTALL… AND ENJOY!It’s now up to you. Excavation, foundation, installation and fi nishing… These are the 4 steps in the process.

YOUR PROJECT IN 4 STEPS

Designed with the do-it-yourselfer in mind, the top quality Modulo products line are produced by Permacon, the leading manufacturer of precast concrete products for the landscaping and masonry industries.

6


1 PLAN YOUR PROJECT

Start by carefully measuring your project site: the more accurate your measurements, the better the outcome. Draw your plan on cross-ruled paper.

Width

Bird’s-eye view of the surface to be paved

Leng

th

Length

Front view of the wall

Height

Scale: 1 square = 1 ft2

7


2

8

CHOOSE YOUR PRODUCT

Among the wide range of Modulo products at your disposal you will want to identify the ones that will lend your landscaping the style and ambience you’re looking for.

TO HELP YOU NARROW DOWN YOUR CHOICE, USE 2 SIMPLE STEPS

1. PATTERN

First, select the PATTERN1. Remember, for a harmonious result that is pleasing to the eye, the pattern should work with your home’s architectural and decorative elements.

(1) Theses pictograms are generic. They are used solely for the purpose of clarity.

LINEAR PATTERNCENTER - CENTER

MODULAR PATTERN2 MODULES

LINEAR PATTERN

LINEAR PATTERNCHECKERED

HERRINGBONE PATTERN

RANDOM PATTERN



3

4

9

ESTIMATE QUANTITIES Whatever the project, estimating the amount of material needed is essential. The formulas on each page will help you do it easily.

INSTALLYou will fi nd at the end of this brochure, the installation guide of each product line. Whether it is for the installation of paving stone, slab, and/or a wall, follow the appropriate guide.

Watch our installation videos about walls, slabs and paving stones at permacon.ca.

2. LOOK

Then determine the type of LOOK you want your project to have. Remember that this LOOK will infl uence the style of your property as a whole. The pictograms for each product’s LOOKS and patterns are shown on the pages that follow. Look for them, they’ll make things easier!

ANTIQUE

Old-time feel

Old-style contours

(edges) and surfaces

(textures)

Blended earth tones

CLASSIC

Traditional appeal

Regular shapes

Straight edges – clean contours

Monochrome or blended colours

NATURAL Combination of natural

textures in a single

product.

Irregular contours vary a

little to a lot

Blended earth tones

EXAMPLE: ESTIMATION OF THE QUANTITIES OF PRODUCTS

12 feet X 11 feet = 132 X 2.30 = 304Length Width Square feet Number of units per ft2 Number of units

required

Measure the

length of your

project and

inscribe it.

Measure the

width of your

project and

inscribe it.

You obtain

the number

of square feet

of your project.

You multiply

the number of

square feet by the

number of units

per square foot.

You obtain

the number of

units required.


10

UNIT

DESCRIPTION

A true contemporary garden wall with clean lines paired with varying depths that create a three dimensional texture and striking shadows across the face of each stone. The fi nished sides on all Skyline Wall units provide a practical way to achieve straight corners that blend perfectly with the stunning face of the wall.

COLOUR

DORSET GREY

Product weight 30 lbS 13.64 kg

Number of units per ft2 2.27

Quantity per cube 100 units

QUANTITY ESTIMATE

2,27

Height X Length = Square feet X Number of units per ft2 = Number of

units required

SKYLINE™ WALL

102 mm4˝

400 mm16˝

145 mm5 3/4˝

NE

W

CLASSIC LOOK


11

COLOURS

406 mm16" 102 mm

4"

146 mm5 3/4"

DESCRIPTION

• The Townsend wall creates a stacked-stone look with a faux joint pattern.

• Their innovative design means that you can use the same module to build walls and curbs.

• One simple size makes installation easy.

• Finished corners - no cutting or sawing required!

UNIT

QUANTITY ESTIMATE - WALL

X = X 1.57 =

Height Length Square feet Number of units per ft2

Number ofunits required

SHADOW BLEND

TOWNSEND WALL AND CURB

TIP

We recommend using Permapro concrete adhesive to secure wall modules.

QUANTITY ESTIMATE - CURB

X 0.75 =

Number of linear feet Number of units per linear foot Number of units required

Product weight 29 lbs 13 kg



Number of units per linear foot 0.75

WALL

CURB

EARTH BLEND

NE

W

NATURAL LOOK


12

DESCRIPTION

A truly professional addition to any stair project is the Podia Step. Featuring an elegant slick design, this step thread coordinates perfectly with our Jasper Wall when installed as a riser. The Podia Step can also be cut in half using a concrete saw to create a clean, smooth wall capping that will match perfectly with the stairs.

COLOURS

RANGE GREY RANGE BEIGE

Product weight 36 lbs 16.36 kg


PODIA™ STEP

NE

W

CLASSIC LOOK

457 mm18˝

300 mm12˝

50 mm2˝

UNIT

QUANTITY ESTIMATE

X 0.66 =



13

COLOURSDESCRIPTION

Saranak slab, available in 2 sizes, is designed with a natural chiselled stone look. It’s perfect for all your path, patio and terrace projects.

Characteristics and benefits

• Chiselled natural stone look.

• Irregular edges .

• Can be installed straight or modular.

• 2 sizes available: 16˝ x 16˝ or 16˝ x 24˝.

EARTH BLENDGRAPHITE SHADOW BLEND

UNITS

SARANAK® SLABS

LAYING PATTERNS

600 mm24˝

400 mm16˝



400 mm16˝


400 mm16˝

50 mm2˝

50 mm2˝

16˝ x 16˝ 16˝ x 24˝

Weight per product 39 lbs 18 kg 59 lbs 27 kg

Number of units per ft2 0.56 0.39

Quantity per cube 60 units 40 unitsQUANTITY ESTIMATE

X = X 0.56 =

Length Width Square feet Number of units per ft2


X = X 0.39 =



16˝ X 16˝

16˝ X 24˝

NATURAL LOOK

NE

W


14

DESCRIPTION

The Mini-Kendo slab lightens up your garden. Play with the gaps to create movement along your garden path. Combine the Mini-Kendo and Kendo slabs together for a path that blends perfectly with your décor.

UNIT

COLOURS

DANVILLE BEIGE RICHMOND GREY

MINI-KENDO® SLABS

NE

W

400 mm15 3/4˝

349 mm13 3/4˝

50 mm2˝

QUANTITY ESTIMATE

X = X 0.76 =




Number of pcs. per square foot 0.76


NATURAL LOOK


15

QUANTITY ESTIMATE

X = X 0.50 =



600 mm24˝

431 mm17˝

558 mm2,2˝

KENDO® SLABSDESCRIPTION

Four different shapes, each with a natural texture and irregular contour, combine for a beautiful project with the look of natural stone, at a fraction of the cost.

UNIT

COLOURS

DANVILLE BEIGE RICHMOND GREY

Product weight 66.9 lbs 30.34 kg

Number of pcs. per square foot 0.50


NATURAL LOOK


16

QUANTITY ESTIMATE

X = X 0.56 =



QUADRAL® SLABSDESCRIPTION

A single-size slab with false joints, creating the look of four unique sized pavers. Ideal for patios, walkways and terraces, providing a rich and highly varied texture that evokes the dignifi ed look of natural slate.


• A variety of textures and joint patterns available through the six different surface stamps.

COLOURS

EARTH BLEND SHADOW BLEND

LAYING PATTERNSUNIT

Weight per product 40 lbs 18 kg



50 mm2"

400 mm15 3/4"

400 mm15 3/4"


NATURAL LOOK


17

PORTAGE® STEPPING STONEDESCRIPTION

This single module slab can be used for a wide variety of projects particularly patios and terraces. For the natural look of fl agstone with irregular contours and surfaces. The random patterns can be used to obtain an “open” mosaic effect with fewer joints.


• A variety of textures with the richness of slate.

• Can be installed with or without joints.

• Compared to natural stone these modules interlock perfectly for:

- A more stable installation and less slab shifting resulting in joint expansion.

- Minimum number of cuts required, resulting in less waste of material.

UNIT

COLOURS

LAYING PATTERNS

SPECIFIC INSTALLATION GUIDE

To create straight edges, cut slabs with a concrete saw (rental).

EARTH BLEND

Begin by laying 3 slabs at the centre of the surface to be covered. Place 3 slabs together to forma cloverleaf.

SHADOW BLEND

Add more sets of3 slabs (cloverleaf)to fi ll in the surfaceto be covered.

Complete the balance of the surface to be covered with single slabs for the fi nal result.

RANGE SANDY BEIGE

43 mm1 11/16"

534 mm21" 391 mm

15 1/2"

RANDOM PATTERN


Number of units per ft2 without joint 0.67

Number of units per ft2 with 2" joints 0.56


QUANTITY ESTIMATE

X = X 0.67 without joints 0.56 with 2" joints

=



NATURAL LOOK


18

DOMINO SLABSDESCRIPTION

The perfect complement to the Domino 50 paver, Domino slabs can be used as inserts or to defi ne boundaries. With a slightly embossed fi nish, this slab can also serve as the main component of patios and pathways.


• Can be combined harmoniously with Domino 50 pavers.

COLOURS


LAYING PATTERNSUNIT




QUANTITY ESTIMATE

X = X 1.00 =



305 mm12" 305 mm

12"

50 mm2"



ANTIQUE LOOK


19

Product Weight 35 lbs 16 kg



QUANTITY ESTIMATE

X = X 0.56 =



400 mm15 3/4"

400 mm15 3/4"

43 mm1 11/16"

PATIO+ SLABSDESCRIPTION

To obtain the effect of interlocking pavers installed in a random way.


• Reproduce the look of cobble paving stone.

UNIT LAYING PATTERN

COLOURS

GREY RANGE IVORY BEIGE


CLASSIC LOOK


20

295 mm11 3/4"

40 mm1 5/8"

295 mm11 3/4"

QUANTITY ESTIMATE - ECONO SLABS

X = X 1.00 =



ECONO SLABSDESCRIPTION

A classic 12" x 12" slab with a lightly textured surface. A cost effective solution, ideal for creating simple installation.


• Very light and easy to manipulate.

UNITS

COLOURS

LAYING PATTERNS

GREY EARTH BLEND



Weight per product 17 lbs 7.7 kg



CLASSIC LOOK


JASPERTM WALLDESCRIPTION

With its rich texture, Jasper wall has a textured appearance resembling that of Canadian Rocky Mountains. Its small size allows for quick and effi cient installation and enhances the look of any landscape. Available in 2 colors, Jasper wall fi ts perfectly with all projects.


• Its small size, and light weight make Jasper wall easy and quick to install.

• With its unique textured facing of the modules, the Jasper wall provides a stacked stone appearance unique on the market.

• Straight and curved walls can be achieved with the Jasper modules and with its side texture, corners can be realized with no cutting or chiselling.

COLOURS

UNITS

SHADOW BLENDEARTH BLEND

305 mm12˝

145 mm5 3/4˝

102 mm4˝

CAPPING UNIT - NATURAL IMPRESSION CAP




WALL




305 mm12" 203 mm

8"

51 mm2"

QUANTITY ESTIMATE

X = X 3.00 =



ANTIQUE LOOK

21


22

BELTIS® TUMBLED WALLDESCRIPTION

A simple wall with an antique look, textured on all surfaces, giving a natural touch to your project.


• Chiseled texture on all surface visible on both sides.

• Beveled module that allows you to create straight and curved line walls.

• The maximum height suggested is 2 feet (without overload).

COLOURS

SHADOW BLEND EARTH BLEND

UNIT

TIP


SPECIFIC LAYING PATTERNS

SIDE BY SIDE (CURVED WALL)

FRONT TO BACK (STRAIGHT WALL)

INSIDE DIAMETERS

83.8 cm (33") = 12 units

2.4 m (8’) = 32 units

3 m (10’) = 38 units

293 mm11 1/2"

197 mm7 3/4"

185 mm7 1/4"

102 mm4"


Number of units per ft2 (front to back wall) 3.84

Number of units per ft2 (side by side wall) 3.27


QUANTITY ESTIMATE

X = X 3.84(front to back wall) =



X = X 3.27(side by side wall) =



ANTIQUE LOOK


MINI-BELTIS® WALLDESCRIPTION

A rustic miniature wall, perfect to be used next to small fl owerbeds or as sidewalk curbs.


• Chiseled texture on all surface visible on both sides.

• Beveled module that allows you to create straight and curved line walls.

• The maximum height suggested is 2 feet (without overload).

COLOURS

RANGE GREY AND CHARCOAL

RANGE BEIGE AND BLACK

RANGE SANDY BEIGE


UNIT

TIP

We recommand using Permapro concrete adhesive to secure them.


FRONT TO BACK (STRAIGHT WALL)

INSIDE DIAMETERS

60.96 cm (24") = 12 units

119.38 cm (47") = 20 units

185.42 cm (73") = 29 units

229 mm9"

160 mm6"

127 mm5"

76 mm3"

Weight per product 7.50 lbs 3.40 kg




QUANTITY ESTIMATE




X = X 5.33(side by side wall) =



ANTIQUE LOOK

23


305 mm12˝

813 mm32˝

1092 mm43"

ANTIQUE LOOK

24

Product weight 800 lbs 363 kg

BELTIS FIRE PIT KITDESCRIPTION

This simple rustic design will be the focal point of your space and the envy of the neighborhood.

UNIT

COLOURS

SHADOW BLEND EARTH BLEND






QUANTITY ESTIMATE




X X X 4.10(side by side wall) =



25

COUNTRY WALLDESCRIPTION

An antiqued fi nish on both sides. You can create small fl owerbeds with straight or curved lines, using this bevelled wall.


• Visible on both sides, each module has a split face on both sides.

• Bevelled module that allows you to create straight and curved line walls.

• The maximum permissible height is 2 feet.(without overload)

COLOURS

RANGE BEIGE

UNIT

TIP


RANGE CHARCOAL

INSIDE DIAMETERS

83.3 cm (33") = 17 units

2.4 m (8’) = 40 units

3 m (10’) = 48 units



FRONT TO BACK(STRAIGHT WALL)

102 mm4"

203 mm8"

160 mm6 1/4"

228 mm9"

ANTIQUE LOOK


TIP


QUANTITY ESTIMATE

X = X 2.00 =



26

OLD FORGE® WALLDESCRIPTION

A straight forward wall with an antique look. It enhances the appeal of certain spaces such as small fl owerbeds.


• The maximum suggested height is 3 feet (without overload).

• The back of bevelled module has groove to cut the module in half.

• The two extremities of the module have grooves to make a 90° split-face corner.

UNIT

COLOURS




RANGE GREY AND CHARCOAL

RANGE BEIGE AND BLACK

100 mm4"

225 mm8 7/8"

457 mm18"

ANTIQUE LOOK


27

UNIVERSAL SLOPE BLOCKDESCRIPTION

This wall has a smooth surface with a unique shape and size. Practical, functional and high performance wall designed specifi cally for straight applications especially to build taller retaining walls with a maximum height of 4 feet without overload.

COLOUR

GREY

UNIT

215 mm8 1/2" 280 mm

11"

135 mm5 5/16"




QUANTITY ESTIMATE

X = X 3.20 =



CLASSIC LOOK


BUILD

A GARDEN IN ONE

AFTERNOON!

COLOUR

TAN

28

DESCRIPTION

Grow your fruits, vegetables, plants and fl owers

anywhere!

Quickly and easily create custom planter boxes and raised-gardens of varying sizes, dimensions and confi gurations with this innovative block. Its unique design was developed to provide a stackable framework for your personalized creations.

Simply stack the blocks to the desired height (maximum 3 blocks high) and slide in 2’’ x 6’’ pieces of lumber into the designated notches to create walls. Use rebar and capping units to solidify and create the fi nishing touches. Fill with soil and plant products. Enjoy!

UNIT



PLANTER WALL BLOCK

197 mm7 3/4"

197 mm7 3/4"

140 mm5 1/2"


29

Visit permacon.ca for more confi guration ideas.

ENDLESS CONFIGURATION POSSIBILITIES

BASIC INSTALLATION

TIERED INSTALLATION FURNITURE

Bench

4 ft.

8 ft.

2 ft.

4 ft. 4 ft. 4 ft.


30

COLOURS

HERITAGE® UNIVERSAL PAVERSDESCRIPTION

This paver has a pure look with clean lines. The dimensions and regular layout of this classic can be used to create an effect reminiscent of brick.


• Clean lines.

• Simple geometric shape.

• Flexibility due to the variety of laying patterns.

GREY

LAYING PATTERNS

TIP

To obtain an even distribution of colour and texture, it is recommended that you choose paving stones from more than one cube at a time. Moreover, working down each cube always gives the best results.

UNIT

200 mm7 7/8"

50 mm2"

100 mm3 15/16"


HERRINGBONE PATTERN




QUANTITY ESTIMATE

X = X 4.57 =



CLASSIC LOOK


31




DOMINO 50 PAVERSDESCRIPTION

This revolutionary paver can be easily used to create a herringbone pattern for a modular look or a running bond pattern for a linear look.


• Can be combined harmoniously with Domino slab.

COLOURS

LAYING PATTERNSUNITS


305 mm12" 152 mm

6"

50 mm2"

305 mm12" 152 mm

6"

50 mm2"

305 mm12" 152 mm

6"

50 mm2"

LINEAR PATTERN MODULAR PATTERN3 MODULES

QUANTITY ESTIMATE

X = X 2.00 =



ANTIQUE LOOK


32

STRATUS CURBDESCRIPTION

Small curb at an accessible cost, used for paved surfaces or small fl owerbeds. The presence of an irregular joint evokes the feel of natural stone.


• Curbs with a joint simulating 2 pavers gives a natural surface look.

• The bevelled ends of the curbs allow you to achieve straight or curved lines.

COLOURS


UNIT




300 mm11 13/16" 80 mm

3 1/8"

80 mm3 1/8"

QUANTITY ESTIMATE

X 1.02 =


NATURAL LOOK


33

SCALLOPED CURBSDESCRIPTION

Attractive and practical, these edgers draw the eye and defi ne fl owerbeds, tree rings and planting areas. A classic and easy to use product that adds the fi nishing touch you’re looking for.

UNITS

COLOUR

WHITE

TIP

For better stability, the curbs should be embedded 3" into the soil.

SPECIFIC LAYING PATTERN

0.91 m (36") = 4 radius edges of 3 feet in diameter

50 mm2" 600 mm

24"

150 mm6"

50 mm2"

600 mm24"

150 mm6"

QUANTITY ESTIMATE

X 0.50 =


STRAIGHT SCALLOPED CURB




RADIUS SCALLOPED CURB




CLASSIC LOOK


34

UNIVERSAL CURBDESCRIPTION

A longer curb with simple geometry and clean edges for a defi nite classic look. The full system includes a 90° corner module and a radius module.


• Tongue and groove ends ensure great stability.

UNITS

COLOUR

GREY

200 mm8"

80 mm3 1/8"

1000 mm39"

80 mm3 1/8"

200 mm8"

1000 mm39"

300 mm12" 300 mm

12"

200 mm8"

80 mm3 1/8"

QUANTITY ESTIMATE

X 0.31 =

Number of linear ft Number of units per linear ft Number of units required

90° UNIVERSAL CORNER CURB



RADIUS UNIVERSAL CURB


Number of units per linear ft 0.31


STRAIGHT UNIVERSAL CURB


Number of units per linear ft 0.31


ANTIQUE LOOK


35

COLOUR

DEC-BLOCK®

GREY

UNIT

DEK-BLOCK®

DEC-OR-POST® SAKRETEPLASTIC CURB

DESCRIPTION

Proven performance in the Canadian market for decades, the Permacon Dek-Block is a must when designing a wooden deck.


• Heavier is better; 50 lbs means better anchoring power and greater stability.

• Increased bearing strength means Dek-Block is the strongest product.

• Made for Canadian winters, the Dek-Block can withstands freeze thaw cycles.

• Quick and easy installation. No excavation required.

280 mm11"

280 mm11"

190 mm7 1/2"




300 mm12˝

300 mm12˝

190 mm7 1/2˝ COLOUR

MODULEDESCRIPTION

• Holds 4˝ x 4˝ or 6˝ x 6˝ posts vertically.

DEC-OR-POST®

NATURAL

DESCRIPTION

• Easy to use, this curb secures your pavers in place and provides a clean, fi nished look.

• Curves are easily accomplished.

• Suitable for straight runs.

• Enables curves without cutting.

• 6 linear feet.



THE

ORIGINAL4-Way

Dek-Block™


SAVE 10%

ON YOUR

PROJECT TODAY

36

DESCRIPTION

A patented and revolutionary deck block that has been specifi cally engineered to make carrying, handling and installing easier; yet with the same great advantages as the Original Dek-Block®.


• Product shape enables easier grip and handling.

• 50% lighter than the Original Dek-Block®, requiring less effort to build your deck.

• Same great stability, load-bearing capacity and quantity of blocks required to achieve your deck project as the Original Dek-Block®.

• Can receive 4"x4" vertical posts.

• Resists the harshest Canadian freeze and thaw cycles.

• Meets safety level support requirements.

UNIT

DEK-BLOCK® OPTI

260 mm10 1/4"

260mm10 1/4"

146 mm5 3/4"



COLOUR

GREY


37


38

7 1/2"

7 1/2"

7 1/2"

7 1/2"

16"

16"

16"

16"

10"

8"

6"

4"

STANDARD BLOCKDESCRIPTION

Perfect For all your renovating and building projects

COLOUR

NATURAL

UNITS

4"D 6"D 8"D 10"D

Weight per product 24 lbs 29 lbs 40 lbs 45 lbs


100 units

75 units

54 units


39

1

2

How do I calculate the quantity of granular foundation material required for a retaining wall?Measure the depth (in inches) of the trench. Measure the width (in inches)

of the trench.

EXAMPLE

6 in X 18 in ÷ 144 = 0.75

Depth Width Multiplication factor

Multiply length of the wall (in feet) by the multiplication factor (0.75). This gives the volume of

0-20 mm (0-3/4 in.) stone in cubic feet you need.

EXAMPLE FOR A WALL 15 FT LENGTH

15 in X 0.75 = 11.25 ft3

Length of the wall Multiplication factor Volume of 0-20 mm (0-3/4") stone

PROJECT PLANNING FOR RETAINING WALLSESTIMATION OF THE QUANTITY OF GRANULAR FOUNDATION MATERIAL

How do I calculate the quantity of clean stone required behind a retaining wall?Measure the depth (in inches) of the trench.

EXAMPLE

12 in ÷ 12 = 1.00

Width behind the wall Multiplication factor

Multiply height of the wall (including the section that will be under the ground) by lengh of the

wall. Then, multiply the result by the multiplication factor (1.00). This gives the volume of 20 mm

(3/4 in.) clean stone in cubic feet you need.

EXAMPLE FOR A WALL 3 FT HIGH BY 15 FT LONG

3 ft X 15 ft X 1.00 = 45 ft3

Height of the wall Length of the wall Multiplication factor Volume of 20 mm (3/4") clean stone


40

EXCAVATION

To begin, mark out the area to be excavated with stakes and string. You can indicate various key points on the ground with an aerosol marker. Determine the level of your wall from the lowest point. Dig a trench at least 12 inches (300 mm) deep by 24 inches (600 mm) wide.

To check that the depth of the trench is uniform, use the stakes and attach a string in a level manner. Stretch the string tight and with a line level, check along several points to make sure that the whole trench is at the same depth.

FOUNDATION

Fill the trench with 10 inches (254 mm) of 0-¾ crushed stone (20-0 mm). Level it with a rake. To facilitate compaction, you can hose down the surface. Use the mechanical tamper to compact the entire surface. Overlap the strokes of the tamper.

To check that the foundation is uniform, attach a string in a level manner. Stretch the string tight and, with a line level, check along several points to make sure that the whole foundation is at the same depth.

INSTALLATION

Spread ½ inch (12.7 mm) of stone dust on top of the compacted foundation. Check the fi nal level with a spirit level.

For the fi rst row only, if necessary, remove the lip on the rear of the block with a small sledgehammer. Remove the lip on the rear for these types of blocks: Chiseled wall, Border wall.

This step will assist in leveling the blocks. Prepare a number of blocks in advance.

We strongly recommend that you wear safety glasses for this step.

Pull a string to align the blocks in the fi rst row. Install the fi rst row of blocks, starting with a corner. Check levels in both directions, from front to rear and left to right. Remove or add stone dust to adjust the level. You can also adjust the level by lightly tapping the surface of the block with a small sledgehammer. Check the level from block to block.

WALLS INSTALLATION GUIDE


41

INSTALLATION (CONTINUED)

To start the second row, cut a block in half to make a half block. Draw a line around the block. Strike that line. Finish the cut by striking fi rmly on the visible face of the block. You can also make the cut with a concrete saw.

We strongly recommend that you wear safety glasses for this step.

Next, install a second and third row of blocks, making sure that the rear lip, if there is one, rests fi rmly on the block on the row underneath. If the block has no rear lip, you should position the block by aligning the front faces. Alternate the position of the blocks to off-set the joints. Check that the blocks are leveled.

Never install blocks in a column. You must always overlap the joints. To ensure that the wall is solid, you can glue each block with Permapro concrete adhesive.

When the wall is completed, install a perforated drainage pipe behind the wall and connect it to the existing drainage system. Fill the space behind the wall with ¾ inch (20 mm) clean stone.

Install a geotextile. This will prevent garden soil from contaminating the clean stone.

The back of the wall can now be fi lled with dirt or top soil.

FINISHING

For certain types of walls, capping is necessary. If this is the case, all capping modules must be glued with Permapro concrete adhesive.

Fold the geotextile under the front of the last row.

Slide the capping module forwards so that it overhangs from the face of the wall by about 1 inch (25.4 mm).

Visit our website at PERMACON.CA to watch the walls installation video.

TOOLS

Geotextile membrane

Small sledgehammer and cold chisel

Concrete adhesive

Foundation stone (0-3/4")

Concrete saw

Gloves

String

Rake

Line level

Spirit Level

Drainage stone (3/4")

Stone dust

Stakes

Shovel

Safety glasses

Measuring tape

Mechanicaltamper

Perforateddrainage pipe

Aerosolmarker


42

PAVERS AND SLABS INSTALLATION GUIDEEXCAVATION

To begin, mark out the area to be excavated with stakes and string. You can indicate various key points on the ground with an aerosol marker. Extend the surface line by 6 inches (150 mm) on all sides. The curbs will be laid in the excess area.

Determine the level of your patio. You must provide a drainage slope away from the house of ¼ inch (6.5 mm) per foot. If your project measures 10 feet (3 m), you will have a slope of 2 ½ inches (63.5 mm).

Dig a minimum of 12 inches (300 mm) deep.

Check along several points that the foundation is at the same depth. Cover the bottom and sides of the excavated area with a geotextile membrane. The geotextile will prevent the foundation from mixing into the natural soil. It will also provide greater stability.

FOUNDATION

Spread 10 inches (254 mm) of 0-¾ (0-20 mm) crushed stone. Level it with a rake. To facilitate compaction, you can hose down the surface. Use the mechanical tamper or vibrating plate to compact the entire surface. Overlap the strokes of the tamper.

To check that the foundation depth is uniform, use the stakes and attach a string. Stretch the string tight and, maintaining the drainage slope, check along several points to make sure that the entire foundation is at the same depth.

Spread the stone dust between the pipes. Level it with a rake fi rst and then with the aid of a straight board.

Move the pipes and repeat the operation until the entire surface is done. Do not walk on the stone bedding. Gaps are created when you move the pipes. These will be fi lled in a later stage during the installation of pavers and slabs.

INSTALLATION

Pull a string to align the modules in the fi rst row. Place the fi rst slabs or pavers on the bedding. Continue work by walking on the modules. Never walk on the bedding. Walk on the slabs or pavers and fi ll in the gaps left by the pipes.

Check the alignment of pavers or slabs after 5 rows and adjust them as needed with a screwdriver. If you need to cut pavers or slabs, use a concrete saw from a rental centre. This will give you a straight cut. We strongly recommend that you wear safety glasses when cutting pavers or slabs. When cutting, keep a distance from the pavers or slabs already installed because dust and dirt will irreversibly stain the modules already in place.

For pavers only: you can use a cold chisel and a small sledgehammer. Draw a line on the paver. Strike along the line. Finish the cut by striking fi rmly on the visible face of the paver.

Installing the curbs: If you install concrete curbs, you must install them directly on the same bedding as your slabs and pavers. If you are installing plastic paving edges, you must install them directly on the same bedding as pavers or slabs. Insert nails every 8 inches.

FINISHING

For slabs: When you have completed laying the slabs, spread polymeric sand and sweep it in all directions to fi ll in the joints. You should never use the vibrating plate on the slabs.

For pavers: Spread sand and stabilize the pavers with a vibrating plate. This will set the pavers into their bedding and level the surface.

Sweep away any excess sand. To easily remove surface sand from pavers and slabs, use a leaf blower.

Before watering, make sure that no sand remains on the surface. Gently spray a fi ne mist of water for 10-15 seconds on a portion of the paving surface. Wait 3-4 minutes. Spray again until no more water soaks into the paver joint. Stop after two repetitions. We strongly suggest that you read the complete procedures described on the polymeric sand bags.

Visit our website at PERMACON.CA to watch the pavers and slabs installation video.

Gloves

String

Foundation stone

(0-3/4")

Stone dust

Stakes

Shovel Broom

Safetyglasses

Polymeric sand

Permapro plastic curb

Rake

Geotextile membrane

Spirit level

Line level

Concrete saw

Vibrating plate

2,5 cm (1")pipes 4 feet

straight plank

Mechanicaltamper

Small sledgehammer

and cold chisel

TOOLS

Measuring tape

Water gun and hose

Aerosolmarker

Visit our website at PERMACON.CA to watch the pavers and slabs installation video.


43

1

2

How do I calculate the quantity of granular foundation material required for paved surface?Measure the depth (in inches) of the paved surface.

EXAMPLE

8 in ÷ 12 = 0.67

Depth of trench Multiplication factor

Multiply the length by the width of the surface, by multiplication factor (0.67). This gives the

volume of 0-20 mm (0-3/4 in.) stone in cubic feet you need.

EXAMPLE FOR AN AREA OF 15 FEET X 20 FEET

15 ft X 20 ft X 0.67 = 201 ft3

Length in feet Width in feet Multiplication factor Volume of 0-20 mm (0-3/4") stone

PROJECT PLANNING FOR CONCRETE PAVERS OR SLABS

ESTIMATION OF THE QUANTITY OF GRANULAR FOUNDATION MATERIAL

How do I calculate the quantity of concrete sand or stone dust required for paved surface?Measure the thickness (in inches) of the setting bed.

EXAMPLE

1 in ÷ 12 = 0.083

Thickness Multiplication factor

Multiply the length by the width of the surface, by multiplication factor (0.083).

This gives the volume of concrete sand or stone dust in cubic feet you need.

EXAMPLE FOR AN AREA OF 15 FEET X 20 FEET

15 ft X 20 ft X 0.083 = 25 ft3

Length in feet Width in feet Multiplication factor Volume of material


44

UNIVERSAL CURB

STEP 1Dig a trench 200-300 mm (8-12 in.) deep by 300 mm (12 in.) wide.

STEP 2Compact the bottom of the trench with a tamper. Ensure that the soil is fi rm and contains no plant matter or clay. Spread 0-20 mm (0-3/4 in.) stone in 100-mm (4-in.) layers, levelling and fi rmly compacting between layers, up to the desired level for positioning the border. Ideally, at least 150 mm (6 in.) of stone should be installed under the border.

STEP 3Spread a thin layer of crushed stone on which to set the borders. This layer facilitates adjustments. Install the borders according to the landscaping plan.

STEP 4Fill the space around the curbs with 0-20 mm (0-3/4 in.) stone and then compact it

with a tamper.

SCALLOP DECORATIVE CURB

STEP 1Dig a trench 100 mm (4 in.) deep by 200 mm (8 in.) wide.

STEP 2Spread 50 mm (2 in.) of crushed stone in the trench. Check to see if the fi nal level of the curb is satisfactory. Adjust the level if necessary.

STEP 3Continue backfi ling both sides of the curbs using the stone dust.

STEP 4Compact the foundation on both sides of the curbs.

STRATUS CURB

STEP 1Dig a trench 100 mm (4 in.) deep by 200 mm (8 in.) wide.

STEP 2Spread 50 mm (2 in.) of crushed stone in the trench. Check to see if the fi nal level of the curb is satisfactory. Adjust the level if necessary.

STEP 3Continue backfi ling both sides of the curbs using the stone dust.

STEP 4Compact the foundation on both sides of the curbs.

Note: The Stratus curb will be installed on the same level as the pavers.

Follow the installation guide of paving stone or slabs.

CURBS INSTALLATION GUIDE


45

WHAT DO I NEED TO CONSIDER WHEN PLANNING A PATIO OR RETAINING WALL?

The essential information to consider when purchasing and installing pavers or walls are the warranty, quantities of material and maintenance. Pavers can enhance the appearance of your property and improve your lifestyle. Deciding how you will use your new landscaping project can often guide you in making the right decision for your purchase. Remember to check local building codes and bylaws before excavating or ask for advice Info-Excavation of your area.

WHAT TYPE OF PAVERS OR SLABS SHOULD I BUY?

The right type of pavers or slabs for your project will depend on your landscaping plan and budget. Ask about our large selection of shapes and colours or discuss your landscaping ideas with a landscaping architect.

WHAT TYPE OF PAVERS SHOULD BE INSTALLED AROUND A POOL?

Concrete pavers are the best choice to ensure a cool surface for bare feet around a pool. Select pale colours, which absorb less heat, and opt for a smooth rather than a rough fi nish.

HOW CAN I PREVENT GRASS AND WEEDS FROM GROWING BETWEEN PAVERS?

Be sure to fi ll the paver joints with polymeric sand, which prevents the growth of weeds and grass. Contrary to popular belief, weeds grow from above the blocks, not below. Airborne pollen is the main contributor to the proliferation of weeds.

WHERE SHOULD I INSTALL THE GEOTEXTILE MEMBRANE?

When excavating for a walkway or patio, we recommend that you install a geotextile membrane between the ground (after excavating) and the granular foundation of 0–20 mm (0–3/4 in.) stone. The membrane prevents the underlying soil from contaminating the stone. This is especially important if the soil contains clay, which can lead to moisture retention in the foundation, causing it to swell during periods of freezing and thawing.

FREQUENTLY ASKED QUESTIONS


46

WHAT IS THE PURPOSE OF A SEALANT AND WHEN SHOULD IT BE APPLIED?

The main purpose of paving sealant is to make the surface more attractive (by giving it a wet appearance). The sealant does not prevent stains from oil or dead leaves but does make maintenance and cleaning easier.

Never apply a sealant during the fi rst year of use, when effl orescence may form on the surface of the pavers. The sealant would seal the effl orescence and make it more diffi cult to clean.

HOW CAN I CLEAN STAINS CAUSED BY OIL OR DEAD LEAVES?

The oil and grease cleaner will remove the oil stains. A mixture of water and bleach will remove dead leaf stains.

THINGS YOU NEED TO KNOW ABOUT EFFLORESCENCE

It is possible that after a couple of weeks or months, a white substance will emerge from your pavers, walls or slabs. This substance is effl orescence. It is a whitish powder like deposit which sometimes appears on concrete products. This deposit is the residue of a soluble salt carried to the face of the product by moisture and left on the surface as a dry powder following evaporation of the moisture.

The effl orescence will continue until either the salt or moisture supply has been exhausted. This can take a few months. There are certain products that can quickly eliminate the effl orescence but be forewarned that it can resurface till ALL of the effl orescence subsides naturally. This is why it is recommended to wait at least 60 days before applying the sealant. Effl orescence does not affect the structural integrity in any way.

WHAT KIND OF WARRANTY COVERS YOUR PRODUCTS?

Permacon offers a 50 years warranty for concrete landscaping products for residential use only. For our complete warranty statement, including exclusions, visit permacon.ca.


47

SLABS – Apply to all slabs

• Always fi ll joints with polymeric sand as soon as pavers are set.• Never use slabs for driveways.• Never compact slabs after setting.• Keep in mind colours are uneven. Alternate slabs to prevent coloured spots.• If you must cut the slabs, use a concrete saw for better results.• Do not apply sealant in the fi rst year after installation.• Refer to page 41 for installation guide.

PAVERS

• Always fi ll joints with polymeric sand as soon as pavers are set.• Always compact pavers at least twice, this helps polymeric sand fi ll

joints completely.• Keep in mind that colours are not even. Alternate pavers during installation,

to prevent coloured spots.• Cut pavers with a concrete saw or with a sledgehammer and chisel.• Installing concrete or plastic curbs helps maintain the joints integrity.• Do not apply sealant in the fi rst year of installation.• Refer to page 41 for installation guide.

CURBS

• Refer to the installation guide on page 43.

WALLS

• All colour ranges are somewhat uneven. Alternate blocks in order to prevent coloured spots.

• Always stagger joints when installing wall blocks (never create columns).• Refer to the installation guide on page 38.

SPECIAL FEATURES OF INSTALLATION


1 888 PERMACON

PERMACON.CA

QUEBEC EN

February 2018


2018...2018 do-it-yourself projects guide pavers - slabs - walls - curbs...

Documents