2016 avanti product guide

7/21/2019 2016 Avanti Product Guide

http://slidepdf.com/reader/full/2016-avanti-product-guide 1/2

Ultrafine Cement (avg. 3.5 microns)

xpansion: NoneRatio: See TDS

CEMENTITIOUS GROUT

Microfine Cement (avg. 7 microns)


N/A

N/A

Smaller particle size penetrates finefractures and silty/clay soils. Low internalcohesion means better permeation and

less drilling costs. Developed for the U.S.DOE by Sandia National Laboratories. ANSI/NSF Standard 61 approved.

• Stabilize weak soils• Seal seepages in mines, dams and tunnels• Contain hazardous waste

• Oil well squeeze cementing

44 lb. bag (54 bags/palSuper sack - 2,000 lbs.Pneumatic Truck

AV-100 Chemical Grout

iquid and Granular

xpansion: NoneRatio: 1:1

CHEMICALLY REACTIVE GELS

1-2 cP(in solution)

Thinnest resin on the market with control-lable gel times from seconds to hours,creating a long-lasting water barrier andsuperb soil stabilization.Tested and ap-

proved for the U.S. DOE by Oakridge

National Laboratory.

• Seal mainlines/laterals/manholes• Contain hazardous waste• Waterproof underground structures• Soil stabilization• Waterstop: tunnels, dams, mines

AV-118 Duriflex

xpansion: NoneRatio: 1:1

1-2 cP(in solution)

Extremely low viscosity resin with geltimes from seconds to hours, creating along-lasting water barrier and superb soilstabilization.

• Sewer lateral/joint sealing/manholes• Contain hazardous waste• Waterproof underground structures• Soil stabilization• Waterstop: tunnels, dams, mines

44-lb. bag (54 bags/palSuper sack - 2,000 lbs.Pneumatic Truck

Liquid Tote - Net wt: 2,300 lbsDrum - Net wt: 130 lbs.Granular 50 lb. bag (24 bags/pal

AV-160 SuperGel 3-4 cP

(in solution)Extremely low viscosity acrylate resin withadjustable gel times. Creates a long-last-ing water barrier and superb soil stabiliza-tion. Non-Acrylamide product.

• Sewer lateral/joint sealing/manholes• Contain hazardous waste• Waterproof underground structures• Soil stabilization• Waterstop: tunnels, dams, mines

Tote - Net wt: 2,430 lbsDrum - Net wt: 135 lbs.

Tote - Net wt: 2,250 lbsDrum - Net wt: 130 lbs.

LIFTING FOAM

AV-600 SureLift /Fast and Slow Version

xpansion: 1500-2000%Ratio: 1:1

A 475 cPB 200 cP

Dual component, pour-in-place hydropho-bic urethane foam system. Low viscositydesign allows material to be blended withtypical/hand mixers.

• Lift concrete slabs• Fill voids• Strengthen soils

Tote-A: 2,585 lbs.| B: 2,2Drum-A: 517 lbs.| B: 446Pail-A: 42 lbs. | B: 42 lbs.

URETHANE GELSAV-254 Gelseal

xpansion: SlightWater to Resin Ratio: 8:1

10 cP(in solution)

Prepolymer resin with excellent perme-ation properties when injected in water.Cures to create an effective water barrier while providing soil stabilization.

Waterproof/stabilize soils around: • Manholes• Pipe joints • Tunnels and dams • Underground structures

5-Gallon Pail

ELASTOMERS

AV-350 Multigel

xpansion: SlightWater to Resin Ratio: 8:1

10 cP(in solution)

Prepolymer resin with excellent perme-ation properties. Has added benefit ofcontaining dimethyl ketone (acetone).

Waterproof/stabilize soils around: • Manholes • Pipe joints • Tunnels and dams • Underground structures

55-Gallon Drum5-Gallon Pail

AV-200 Duraset


1400 cP(A/B mixed)

Dual component elastomer resin. Curesto a pliable rubber in 4-minute and34-minute versions. AV-201 Primer isrecommended.

• Rubber coating• Fill cracks• Fill joints• Sprayable, injectable, trowelable versions

55-Gallon Drum5-Gallon Pail

Dual Cartridge

AUXILIARY PRODUCTS PACKAGING OPTIONS

• Injectors & Couplers• Pumps & Hoses• Injection Hose Kit• Oakum• Resin Rod• Catalysts

• Personal Protective Equipment (PPE)• Cured-Resin Remover• Latex • Dyes• Root Inhibitor• Technical-Grade Acetone

Smaller particle size penetrates finefractures and silty/clay soils. Low internalcohesion means better permeation andless drilling costs.

• Stabilize weak soils• Seal seepages in mines, dams and tunnels• Contain hazardous waste• Oil well squeeze cementing

1100 Hercules Ave. Suite 320 | Houston, TX 77058 | P: 800.877.2570 | F: 281.486.7300 | www.AvantiGrout.com

Cementitious Grout - Chemically Reactive Gels - Lifting FoamUrethane Gels - Elastomers - Auxiliary Products

† Contains no phthalates, solvents, VOCs, CFCs or V

AvantiGrout Product Guide

xpansion: SlightRatio: 1:1

Viscosity Description General Uses Packaging (net w

7/21/2019 2016 Avanti Product Guide

http://slidepdf.com/reader/full/2016-avanti-product-guide 2/2

AV-248 Flexseal /AV-249

†

Expansion: 400-600%

Ratio: See TDS

AV-275 Soilgrout /AV-276

†

Expansion: 1500-2000%

Ratio: See TDS

150-250 cP

550-830 cP

1200 ±2000 cP

120-220 cP

Single component, moisture activated

MDI-based hydrophobic resin that with-

stands wet/dry cycles. Forms a resilient,

impermeable, flexible foam.

• Above and below ground structures

• Pipe annulus between slip-liners

• Fine cracks or joints in concrete

• Expansion joints

5-Gallon Pail

Catalysts: Low cP: 32 o

Standard: 16

High cP: 25 o

AV-278 Low Vis Hydro /AV-279

†


Ratio: See TDS

25-100 cP Single component, MDI-based poly-

urethane resin that uses moisture as an

initiator. Designed with soil permeation in

mind. Withstands wet/dry cycles.

AV-280 Hydrofoam /AV-281

Expansion: 1500-2000%Ratio: See TDS

1700-2200 cP Single component, MDI-based poly-

urethane resin that uses moisture as an

initiator. Designed to not easily wash awayin high volumes of water.

• Fill voids via curtain or probe grouting

• Seal annular spaces

• Slope stabilization• Stabilization of coarse soils or gravel

A 50-150 cP

B 100-300 cP

Dual component, MDI-based hydro-

phobic polyurethane resin designed to

fill large voids where high water flow is

present and reacts in seconds.

• Manholes

• Storm and drain culverts

• Cut off high water flows

AV-315 Microfoam†

Expansion: 400-600%

Water to Resin Ratio: 1:1

50-200 cP Single component, moisture activated

polyurethane injection resin that cures

to a flexible foam. Designed for sealing

active water leaks in very fine cracks or

joints in below-grade structures.

• For use in below grade structures

• Stop leaks in mines, tunnels and subways


AV-330 Safeguard*†

Expansion: 400-600%Water to Resin Ratio: 1:1

350-750 cP ANSI/NSF 61, UL Certified, Potable

water. 100% MDI-based single compo-

nent, moisture activated resin that cures

to a flexible foam. Designed for sealingactive leaks in below grade structures.

• Medium cracks or joints in concrete

• Manholes and pipe penetrations

• Tie-backs and slurry walls

1100 Hercules Ave. Suite 320 | Houston, TX 77058 | P: 800.877.2570 | F: 281.486.7300 | www.AvantiGrout.com

HYDROPHILIC FOAMS

AV-333 Injectaflex

Expansion:400-600%

Water to Resin Ratio: 1:1


water . Single component, moisture

activated polyurethane injection resin.

Designed for sealing active water leaks in

cracks in below-grade structures.

• Cracks or joints in concrete

• Manholes and retaining walls

• Applications involving plastic

Single component, moisture activated

MDI-based polyurethane resin designed

to bind together and waterproof loose

granular soils. Withstands wet/dry cycles.

• Soil stabilization

• Fill voids

• Stop leaks in below-grade structures

• Probe and curtain grouting

• Soil stabilization

• Fill voids

• Stop leaks in below-grade structures

• Probe and curtain grouting

AV-550 Soil Strengthener /AV-551


Ratio: See TDS

20-30 cP Single component, polyurethane designed

to permeate and stabilize various types

of soil. Increases load bearing capacity

of permeable soil by increasing cohesion

between soil by filling void areas.

• Probe grouting

• Tube-a-manchette grouting

• Soil Stabilization

AV-202 Multigrout*

†

Expansion: 400-600%

Water to Resin Ratio - 1:1-12:1


water. Single component, moisture acti-

vated, versatile and flexible polyurethane

foam or gel. Designed for sealing active

water leaks in large concrete structures.

Excellent bonding capabilities.

• Large cracks or joints in concrete

• Dams and reservoirs

• Precast structures

• Manhole and pipe penetrations• EGP (Oakum Soakum) Technique

• Below grade expansion joints

5-Gallon Pail

Catalyst: 32 oz.

5-Gallon Pail

Catalyst: 64 oz.

5-Gallon Pail

Catalyst: 13 oz.

5-Gallon Pail

Catalyst: 25 oz.

5-Gallon Pail

1-Gallon Container

Cartridge

5-Gallon Pail

1-Gallon Container

Cartridge

5-Gallon Pail

1-Gallon Container

5-Gallon Pail

1-Gallon Container

5-Gallon Pail Kit

Dual Cartridge

HYDROPHOBIC FOAMS

Low cP

Standard

High cP

AV-260 Fusion Grout /AV-261


Ratio: See TDS

300-400 cP Single component, moisture activated

MDI-based hydrophobic resin that with-

stands wet/dry cycles. Forms a resilient,

impermeable flexible foam.

• Above and below ground structures

• Pipe annulus between slip-liners


Non-potable version available (AV-202-NTP)

5-Gallon Pail

Catalyst: 32 oz.

AV-290 Fast-Set


Ratio: No Water Required

AV-202-LV Multigrout LV

†

Expansion: 400-600%

Water to Resin Ratio - 1:1-10:1

• Large cracks or joints in concrete

• Dams and reservoirs

• Precast structures

• Manhole and pipe penetrations

650-800 cP Low viscosity version of AV-202. Single

component, polyurethane injection resin

that cures to form a resilient and flexible,

yet tough, closed-cell foam.

5-Gallon Pail

1-Gallon Container

Cartridge

Hydrophobic Foams - Hydrophilic Foams

† Contains no phthalates, solvents, VOCs, CFCs or

AvantiGrout Product Guide

Viscosity Description General Uses Packaging (net w

2016 avanti product guide

Documents