2015/16 · 4 | gdt about gdt dental is a worldwide leader in the field of dental implants. the...
TRANSCRIPT
2015/16Superior Dental Implants Collection
2 | GDT
VER
ED M
ARK
GIR
AFI
CA
GDT | 3
CONTENT
ABOUT GDT COMPANY PROFILE GDT VISION AND STRATEGY GDT MANUFACTURING LINES ENGINIRING CAD CAMSTATE OF THE ART ACURATE MACHINING QUALITY INSPECTION CLEAN ROOM PACKINGCONCEPT OF SURFACE TRAEATMENTS
GDT DENTAL IMPLANT LINES
SPIRAL IMPLANT
SPIRAL CONNIE IMPLANT
CYLINDRICAL IMPLANT
ACTIVE IMPLANT [NEW]
GDT IMPLANT
ONE PIECE IMPLANT
PROSTHETIC PARTSHEALING CUPS STRAIGHT ABUTMENTS 15 ANGULATED ABUTMENTS 25 ANGULATED ABUTMENTS BALL ATACHMENTS ZIRCONIA ABUTMENTSZIRCONIA ABUTMENTS WITH TITANIUM BASE TEMPORARY PEEK ABUTMENTSCASTBLE ABUTMENTS IMPRESION COMPONENTS POWER CLICK ATTACHMENTMULTI-UNITANGULATED MULTI-UNIT ESTHETIC SCREW ABUTMENT INSTRUMENTS TOOLSSTOPPER DRILLSINSTRUMENTS & DRILLSSURGICAL KITSNOTES
4
5
6-10
6
8
10
12
14
16
18
20
2223242526272829303132333435363738394041
4 | GDT
ABOUT
GDT Dental is a worldwide leader in the field of dental implants. The company is a Manufacturer and distributor of dental implants since 2005 and its implants can be found in Tens of thousands of healed persons around the world.
GDT Dental Israel is a global strategic manufacturer with leading international distributions partners. We Manufacture the implants in Israel, Eu, United States and distribute them for both the local and international Markets. Working according to local and international standards, our products are authorized by the leading medical labs around the world, and are sold in more than 30 countries Including Israel, Europe, North America, India and more…..
GDT Dental Vision and Strategy • Creating the highest quality implants, ensuring functional & esthetical solutions, while considering the long term and high success rate of the implant.• Create a collection of products to improve the life quality of the patient.• Continuous improvement and adherence to technological innovation and creativity.• Production of technological products based on simplicity and long-term benefits to the doctor and the patient. • Allowing each physician and patient worldwide use innovative product at an affordable price.
Product RangeGDT manufactures six type of dental implants and wide variety of prosthetic parts, as well as using extremely innovative clean-green surface treatment, one switching platform for all diameters components which enable the dentist to maintain minimal inventory of prosthetic parts.
Standards-certificationsGDT is committed to the highest level of accuracy and quality control to Produce the Best possible implants and related products. The company’s products comply with All the requirements of medical devices standards and are medical iso 13485-2012 & CE 1023 approved.
Customer ServiceThe company sees its customers with a very Importance all over the world. The company’s products are marketed worldwide through authorized resellers.The company believes in providing support and comprehensive service and support.We are working constantly to provide information and training to distributors and customers in order to foster a tradition of ad-lasting quality and excellence.
GDT | 5
MANUFACTURING LINES
ENGINIRING CAD CAMOur company specializes in designing computer-aided dental elements The planning department engineers have extensive experience in many areas• Computerized mechanical design. • Strength of materials. • Simulation of assemblies and subassemblies. • Metallurgy. Human engineering and product planning to use a simple stable and comfortable to the doctor and the patient. Dental product design requires a comprehensive scientific thinking concerning mechanical strength of the product and the ability to ensure the survival during
transplantation as well as the creation of a precise-strong connection and resistant to vibration and continuous wear.We are working on the continuous development of new products and improving existing products to ensure total quality so as to assure long-term success in improving the patient’s quality of life.
STATE OF THE ART ACURATE MACHININGOur company has a modern factory with high quality computerized machines very secure continuous and repeatable accuracy.Manufacturing operations based on a computerized manufacturing system and program management and monitoring of the different jobs and Very strict production process, controlled by skilled workers with knowledge and experience.
QUALITY INSPECTION Our company manufactures medical-dental products during application and adaptation most stringent workmanship standards in the industry.The company’s products are tested in the production process and in the transition between the various productions stages by qualified Inspectors in accordance with the specifications defined of production procedures.Our company is certified to iso13485-2012 and carries the CE-1023 icon.Our company is working constantly to improve the quality policy and ensuring maximum quality level of the company’s products, all to ensure excellent products And customer satisfaction.
CLEAN ROOM PACKINGPackaging process is done in a clean room ensures purification level specified by the medical device for dental implants.Packaging room environment ensures hygiene product during the sterile packaging and ensuring long shelf life without any possible contamination of the product This room clean environment suitable for international labor standards defined in the CE standard.
6 | GDT
3.75 3.75 3.75 3.75
* All dimensions are in millimeters ** All the implants manufactured of titanium (Grade 5)
ImplantsSlim Conical connection
For single use only
Manufacturer
Product name
Type
Parameters, sizes
Date of sterilization products
Tracking dose
Type / aticle (by catalog of manufacturer)
This product is sterilized by gama radiation
Check the manuel
Spiral Spiral Cone Bioline One Piece
Ordering Information
Bioline Implants introduction
Bi-3-3.75-10
103.75
Israel, Tefen Industrial Park, p.o.box 47, 24959, Tel: +972-(0)4-9872774, Fax:+972-(0)4-9872775 www.in�nity.com
Israel, Tefen Industrial Park, Zip: 2495900, Tel: +972-54-9-44-7777 www.bioline-dental.com
1023BIOLINE Dental Implants Systems
Bi-3
Reservation form of the Company’s products is done in a simple manner according to the illustration below and the attached color-coded and lengths below.For more information or questions are asked to please contact: [email protected]
Israel, Beer Sheva ,Yizhak Ben-Zvi 9 Apt 64 ZIP 8489327, Tel: +972-54-7790282WWW.GDentalT.COM
Global Dental Transfer LTD
GD-3
GD-3-3.75-10
GDT | 7
Our Dental Collection
8 | GDT
Our spiral implant is a unique product based on traditional and proven design of tapered implant threaded balanced and dynamic self-drilling capability. Outstanding tapered implant symmetrical structure that contributes to balance efforts and equal distribution of possible loads during implantation and for the duration of use.Internal hex connectionThis series of implants with internal hex connection very high precision mechanical strength and guarantees long durability.Implant StructureThe implant is built strong and stable body with durable blades that collect at the corners convene the soft bone and compressing it during implantation to ensure the uniform and high-quality platform for connecting the bone graft. The implants are equipped with uniform connection platform that allows the use of identical parts of rehabilitation after transplantation. Anodized coating technology unique anti-bacterial process. The implants undergo anodized coating process which contributes to creating anti-bacterial shell on titanium raw. The coating is made from natural ingredients Food Standard \ Medicine and unattended polluting industrial materials. Anodized great extent contributes to the mechanical strength and maintaining internal connection implant restoration parts and prevents friction between bare metal, this procedure ensures long-term success of rehabilitation on implants.
Spiral Implant
Surface treatment unique approachOur company has adopted the method of surface treatment based on technology SLA or the RBM using quality materials to create Topography required on the one hand and on the other hand has chosen, principle, not to use chemicals and industrial pollutants which the results in their use may be harmful after months \years during the break-up of chemicals. The company decided to use citric acid seem natural stabilized as a key component in the process of removing residues media which was sprayed on a dental implant during surface treatment .The use of acid seem natural ensures that the implant will be absorbed very well and that will avoid situations of rejection of implants resulting from acid treatment consisting of aggressive industrial chemicals that have the feature break-up after a certain period. This process is unique to our company and is based on years of experience and hundreds of thousands of implants manufactured and implanted around the world.
Condensing High Theards
Anti Bacteirial Anodize Coating
Anti-unscrewing Groove
Self Drilling Law Theards
GDT | 9
Throughout entire implant's length In cases of a hard bone drill through the cortical layer
Soft Bone
Hard Bone
Ø 3.75
Ø 6.0
Ø 4.2
Ø 5.0
Ø 3.3 Soft Bone
Hard Bone
Soft Bone
Hard Bone
Soft Bone
Hard Bone
Soft Bone
Hard Bone
Ø 2.8Ø 2.0 Ø 3.2 Ø 3.65 Ø 4.5 Ø 4.8 Ø 5.2 Ø 5.8Ø 4.1
3.3
3.75
4.2
5.0
6.0
O
O
O
O
O
DiaLength6.008.00
10.0011.5013.0016.00
3.30
GDT-F3308GDT-F3310GDT-F3311GDT-F3313GDT-F3316
3.75GDT-F3706GDT-F3708GDT-F3710GDT-F3711GDT-F3713GDT-F3716
4.20GDT-F4206GDT-F4208GDT-F4210GDT-F4211GDT-F4213GDT-F4216
5.00GDT-F5006GDT-F5008GDT-F5010GDT-F5011GDT-F5013GDT-F5016
6.00GDT-F6006GDT-F6008GDT-F6010GDT-F6011GDT-F6013
The recommendations presented in this drilling Protocol, based on long experience of specialists in the world. However it is important to examine each case on its merits based on the physician’s ability to perform the procedure, and the state of the patient’s jaw implant transpires with the beginning and there may be changes according to the situation.In principle, we recommend using a drill that its diameter smaller than the diameter of the implant, in the case of soft bone condition. Also, consider using a similar drill diameter implant intended for implantation in the case of hard bone in order to avoid trauma to the bone and ensure rapid bone building around the implant.
Drilling protocol
10 | GDT
Spiral Connie Implant
Innovative implant is based on the successful series of Our company’s original spiral implant. The design of the upper part of the implant is formed mainly for aesthetic reasons. Upper conical portion helps prevent regression of bone and supports geometric rebuilding of restoration parts on the implant above the gum line. Internal hex connectionThis series of implants with internal hex connection very high precision mechanical strength and guarantees long durability.Implant structureInventive ThinkingThe implant is built strong and stable body with durable blades that collect at the corners convene the soft bone and compressing it during implantation to ensure the uniform and high-quality platform for connecting the bone graft.The implants are equipped with uniform connection platform that allows the use of identical parts of rehabilitation after transplantation.Anodized coating technology unique anti-bacterial process. The implants undergo anodized coating process which contributes to creating anti-bacterial shell on titanium raw. The coating is made from natural ingredients Food Standard \ Medicine and unattended polluting industrial materials. Anodized great extent contributes to the mechanical strength and maintaining internal connection implant restoration parts and prevents friction between bare metal, this procedure ensures long-term success of rehabilitation on implants.
Surface treatment unique approachOur company has adopted the method of surface treatment based on technology SLA or the RBM using quality materials to create Topography required on the one hand and on the other hand has chosen, principle, not to use chemicals and industrial pollutants which the results in their use may be harmful after months \years during the break-up of chemicals. The company decided to use citric acid seem natural stabilized as a key component in the process of removing residues media which was sprayed on a dental implant during surface treatment .The use of acid seem natural ensures that the implant will be absorbed very well and that will avoid situations of rejection of implants resulting from acid treatment consisting of aggressive industrial chemicals that have the feature break-up after a certain period. This process is unique to our company and is based on years of experience and hundreds of thousands of implants manufactured and implanted around the world.
Condensing High Theards
Anti Bacteirial Anodize Coating
Conical Top
Anti-unscrewing Groove
Self Drilling Law Theards
GDT | 11
Throughout entire implant's length In cases of a hard bone drill through the cortical layer
Soft Bone
Hard Bone
Soft Bone
Hard Bone
Soft Bone
Hard Bone
Soft Bone
Hard Bone
Ø 2.8Ø 2.0 Ø 3.2 Ø 3.65 Ø 4.5 Ø 4.8 Ø 4.1
Ø 3.75
Ø 4.2
Ø 5.0
Ø 3.3
DiaLength
The recommendations presented in this drilling Protocol, based on long experience of specialists in the world. However it is important to examine each case on its merits based on the physician’s ability to perform the procedure, and the state of the patient’s jaw implant transpires with the beginning and there may be changes according to the situation.In principle, we recommend using a drill that its diameter smaller than the diameter of the implant, in the case of soft bone condition. Also, consider using a similar drill diameter implant intended for implantation in the case of hard bone in order to avoid trauma to the bone and ensure rapid bone building around the implant.
Drilling protocol
3.3
3.75
4.2
5.0
O
O
O
O
6.008.00
10.0011.5013.0016.00
4.20GDT-F4306GDT-F4308GDT-F4310GDT-F4311GDT-F4313GDT-F4316
5.00
GDT-F5108GDT-F5110GDT-F5111GDT-F5113GDT-F5116
6.00GDT-F6106GDT-F6108GDT-F6110GDT-F6111GDT-F6113
12 | GDT
Cylindrical Implant
The company’s implant Cylinder built in order to achieve stability and serve as an anchor for a stable reconstruction. Implant corrugation delicate and multi-donor bone compression insertion process, the cylinder implant is recommended for use in cases of particularly hard bone, but functions well in other cases.cylinder Implant is a classic and reliable product for many years. Easy insertion of the implant in accordance with the recommended drilling Protocol and the geometric structure ensures long term stability. Internal hex connectionThis series of implants with internal hex connection very high precision mechanical strength and guarantees long durability.Inventive ThinkingThe implant is built strong and stable body with durable blades that collect at the corners convene the soft bone and compressing it during implantation to ensure the uniform and high-quality platform for connecting the bone graft The implants are equipped with uniform connection platform that allows the use of identical parts of rehabilitation after transplantation. Anodized coating technology unique anti-bacterial process. The implants undergo anodized coating process which contributes to creating anti-bacterial shell on titanium raw. The coating is made from natural ingredients Food Standard \ Medicine and unattended polluting industrial materials. Anodized great extent contributes to the mechanical strength and maintaining internal connection implant restoration parts and prevents friction between bare metal, this procedure ensures long-term success of rehabilitation on implants.
Surface treatment unique approachOur company has adopted the method of surface treatment based on technology SLA or the RBM using quality materials to create Topography required on the one hand and on the other hand has chosen , principle, not to use chemicals and industrial pollutants which the results in their use may be harmful after months \years during the break-up of chemicals. The company decided to use citric acid seem natural stabilized as a key component in the process of removing residues media which was sprayed on a dental implant during surface treatment .The use of acid seem natural ensures that the implant will be absorbed very well and that will avoid situations of rejection of implants resulting from acid treatment consisting of aggressive industrial chemicals that have the feature break-up after a certain period. This process is unique to our company and is based on years of experience and hundreds of thousands of implants manufactured and implanted around the world.
GDT | 13
Throughout entire implant's length In cases of a hard bone drill through the cortical layer
Soft Bone
Hard Bone
Soft Bone
Hard Bone
Soft Bone
Hard Bone
Soft Bone
Hard Bone
Soft Bone
Hard Bone
Ø 3.75
Ø 6.0
Ø 4.2
Ø 5.0
Ø 3.3
Ø 2.8Ø 2.0 Ø 3.2 Ø 3.65 Ø 4.5 Ø 4.8 Ø 5.2 Ø 5.8Ø 4.1
The recommendations presented in this drilling Protocol, based on long experience of specialists in the world. However it is important to examine each case on its merits based on the physician’s ability to perform the procedure, and the state of the patient’s jaw implant transpires with the beginning and there may be changes according to the situation.In principle, we recommend using a drill that its diameter smaller than the diameter of the implant, in the case of soft bone condition. Also, consider using a similar drill diameter implant intended for implantation in the case of hard bone in order to avoid trauma to the bone and ensure rapid bone building around the implant.
Drilling protocol
3.3
3.75
4.2
5.0
6.0
O
O
O
O
O
6.008.00
10.0011.5013.0016.00
3.30
GDT-G3308GDT-G3310GDT-G3311GDT-G3313GDT-G3316
3.75GDT-G3706GDT-G3708GDT-G3710GDT-G3711GDT-G3713GDT-G3716
4.20GDT-G4206GDT-G4208GDT-G4210GDT-G4211GDT-G4213GDT-G4216
5.00GDT-G5006GDT-G5008GDT-G5010GDT-G5011GDT-G5013GDT-G5016
6.00GDT-G6006GDT-G6008GDT-G6010GDT-G6011GDT-G6013
DiaLength
14 | GDT
Active Implant
Active implant is a unique dental implant developed after thorough research related to the ongoing quality of the connection between the bone and the dental implant. Our development team sought a solution that would extend as far as possible the life of the connection between the bone and the implant everything to ensure long-term quality restoration or almost infinite. In the development process is taken into consideration that even if we use the finest dental implant in the world, it is agreed that this object is a passive metal implant which has no lasting benefit or active contribution of osteointegration. from this point of view, we developed Active implant based on our spiral implant line, but hollowed and with few points of holes in the body, all for the transport or injection of fluid-gel that contain regeneration ingredients. Inventive ThinkingAs presented in the introduction about the Active family implant. The goal is to use this unique dental implant as a tool for transporting liquids and \ or special solutions designed to refresh the soft bone in the jaw. Special holes at the bottom of the implant body and graft are used for transporting liquids from the implant after successful implantation process and indefinitely when the implant is functioning as a basis for dental rehabilitation on the one hand, and as a tool for conveying the same fluid causes the processing of soft bone regeneration. This innovative Active implant is unique and exclusive to our company and reflects technological innovation and a major breakthrough in relation to prolong the life of dental implants and extending the medical care sucsess and life quality of the patient. The proposed maintenance using Active dental implant \ device contributes to bone reconstruction and revival of the soft tissues. The procedure involves performing the proposed maintenance is simple and friendly to the doctor and patient, and is in fact part of the routine care and maintenance required after dental implants procedure from time to time.
Surface treatment unique approachOur company has adopted the method of surface treatment based on technology SLA or the RBM using quality materials to create Topography required on the one hand and on the other hand has chosen , principle, not to use chemicals and industrial pollutants which the results in their use may be harmful after months \years during the break-up of chemicals. The company decided to use citric acid seem natural stabilized as a key component in the process of removing residues media which was sprayed on a dental implant during surface treatment . The use of acid seem natural ensures that the implant will be absorbed very well and that will avoid situations of rejection of implants resulting from acid treatment consisting of aggressive industrial chemicals that have the feature break-up after a certain period. This process is unique to our company and is based on years of experience and hundreds of thousands of implants manufactured and implanted around the world.
Condensing High Theards
Anti Bacteirial Anodize Coating
Anti-unscrewing Groove
Self Drilling Law Theards
GDT | 15
Throughout entire implant's length In cases of a hard bone drill through the cortical layer
Soft Bone
Hard Bone
Soft Bone
Hard Bone
Soft Bone
Hard Bone
Soft Bone
Hard Bone
Soft Bone
Hard Bone
Ø 3.75
Ø 6.0
Ø 4.2
Ø 5.0
Ø 3.3
Ø 2.8Ø 2.0 Ø 3.2 Ø 3.65 Ø 4.5 Ø 4.8 Ø 5.2 Ø 5.8Ø 4.1
The recommendations presented in this drilling Protocol, based on long experience of specialists in the world. However it is important to examine each case on its merits based on the physician’s ability to perform the procedure, and the state of the patient’s jaw implant transpires with the beginning and there may be changes according to the situation.In principle, we recommend using a drill that its diameter smaller than the diameter of the implant, in the case of soft bone condition. Also, consider using a similar drill diameter implant intended for implantation in the case of hard bone in order to avoid trauma to the bone and ensure rapid bone building around the implant.
Drilling protocol
3.3
3.75
4.2
5.0
6.0
O
O
O
O
O
6.008.00
10.0011.5013.0016.00
3.30
GDT-IR3308GDT-IR3310GDT-IR3311GDT-IR3313GDT-IR3316
3.75GDT-IR3706GDT-IR3708GDT-IR3710GDT-IR3711GDT-IR3713GDT-IR3716
4.20GDT-IR4206GDT-IR4208GDT-IR4210GDT-IR4211GDT-IR4213GDT-IR4216
5.00GDT-IR5006GDT-IR5008GDT-IR5010GDT-IR5011GDT-IR5013GDT-IR5016
6.00GDT-IR6006GDT-IR6008GDT-IR6010GDT-IR6011GDT-IR6013
DiaLength
16 | GDT
BioLine Implant
This dental implant is a concept based on the popular series of familiar GDT spiral conical implants. The Conical structure of the implant, single-threaded and self-drilling head of the implant identical conical-spiral implant very successful, and the company’s best-selling in recent years. Alongside the success of this dental implant and as a result of careful thought on the part of our development team in the company and recommendations of researchers from medical institutions, large and well known, in Israel and abroad, GDT decided to develop and produce a series of implants Which are based on computerized mechanical corrugation which increases the surface of the implant and inviting quality morphology creates excellent conditions for integration between the implant to the bone. The uniqueness is that conditions are produced by corrugation of the implant computerized machine during production using special blades that were developed for this purpose. The Result is a pure dental implant, manufactured from, Medical Grade 5 titanium missing from chemical treatments, chemical etching, rinsing industrial soaps and aggressive acids that may chemically decompose within a short time, and produce inflammation and risk of emission of the implants.
Inventive ThinkingTo encourage bone growth around this unique implant and creating Osseo integration quantitative and qualitative, the company developed with Ghimas S.p.A this unique gel, SLURRY is a physical form characterized by a micro dispersion of solids in a gel. This is due to the ultra microstructure of the solid which, being in a sufficient amount of liquid, cannot settle, with complex physical interactions between the solid particles surrounded by hydrophilic molecules and forces of chemical attraction keeping the product fluid and cohesive. From a biological standpoint, the SLURRY ensures better bio-compatibility for more harmonious degradation of the polymer and copolymer and of the co-formulates, which are therefore more easily degraded by the organism using normal metabolic systems (e.g. the Krebs cycle).The unique combination of pure titanium implant with mechanical roughening without spraying substances that cause infection on the one hand, and on the other hand use of this unique wave is breaking scientific way of thinking.Proven clinical experience of using these implants in recent years testifies to the success and consistency of the proposed process benefits.
1ST Micro Thread
2ND Micro Thread
3RD Micro Thread
GDT | 17
Throughout entire implant's length In cases of a hard bone drill through the cortical layer
Soft Bone
Hard Bone
Ø 6.0
Soft Bone
Hard Bone
Soft Bone
Hard Bone
Soft Bone
Hard Bone
Soft Bone
Hard Bone
Ø 2.8Ø 2.0 Ø 3.2 Ø 3.65 Ø 4.5 Ø 4.8 Ø 5.2 Ø 5.8Ø 4.1
Ø 3.75
Ø 6.0
Ø 4.2
Ø 5.0
Ø 3.3
The recommendations presented in this drilling Protocol, based on long experience of specialists in the world. However it is important to examine each case on its merits based on the physician’s ability to perform the procedure, and the state of the patient’s jaw implant transpires with the beginning and there may be changes according to the situation.In principle, we recommend using a drill that its diameter smaller than the diameter of the implant, in the case of soft bone condition. Also, consider using a similar drill diameter implant intended for implantation in the case of hard bone in order to avoid trauma to the bone and ensure rapid bone building around the implant.
Drilling protocol
3.3
3.75
4.2
5.0
6.0
O
O
O
O
O
6.008.00
10.0011.5013.0016.00
3.30
GDT-BI3308GDT-BI3310GDT-BI3311GDT-BI3313GDT-BI3316
3.75GDT-BI3706GDT-BI3708GDT-BI3710GDT-BI3711GDT-BI3713GDT-BI3716
4.20GDT-BI4206GDT-BI4208GDT-BI4210GDT-BI4211GDT-BI4213GDT-BI4216
5.00GDT-BI5006GDT-BI5008GDT-BI5010GDT-BI5011GDT-BI5013GDT-BI5016
6.00GDT-BI6006GDT-BI6008GDT-BI6010GDT-BI6011GDT-BI6013
DiaLength
18 | GDT
One Piece Implant
This implant is a single unit containing a body comprising an implant and a straight structure.The implant is made of 3 mm diameter 3.3 mm and 3.75 mm.This implant is designed specifically for use in a narrow ridge and narrow place between teeth.The implant is for immediate loading because of its uniform structure, this implant coated with anti-bacterial anodized gold colored.The surface of the implant treated the same way in which the treatment is carried out at all our implants series.
Surface treatment unique approachOur company has adopted the method of surface treatment based on technology SLA or the RBM using quality materials to create Topography required on the one hand and on the other hand has chosen , principle, not to use chemicals and industrial pollutants which the results in their use may be harmful after months \years during the break-up of chemicals. The company decided to use citric acid seem natural stabilized as a key component in the process of removing residues media which was sprayed on a dental implant during surface treatment .The use of acid seem natural ensures that the implant will be absorbed very well and that will avoid situations of rejection of implants resulting from acid treatment consisting of aggressive industrial chemicals that have the feature break-up after a certain period. This process is unique to our company and is based on years of experience and hundreds of thousands of implants manufactured and implanted around the world.
GDT | 19
Throughout entire implant's length
In case of a hard bone
Tip length*
6 mm
16 mm13 mm11.5 mm10 mm8 mm
* For the drills Ø 2.0, Ø 2.8, Ø 3.2, Ø 3.65, Ø 4.1 the apical height is included in the drill depth calculation
Important! For the drill Ø 1.4 the apical height is not included in the drill depth calculation (see page 92 for more information).
0 mm 0 mm
Ø 2.8Ø 2.0Ø 1.4 Ø 3.2 Ø 3.65 Ø 4.1
Ø 3.6
Ø 4.2
Ø 5.0
Ø 3.3
Ø 3.03.3
3.75
4.2
5.0
6.0
O
O
O
O
O
10.0011.5013.0016.00
3.00GDT-P3010GDT-P3011GDT-P3013GDT-P3016
3.30GDT-P3310GDT-P3311GDT-P3313GDT-P3316
3.75GDT-P3710GDT-P3711GDT-P3713GDT-P3716
DiaLength
The recommendations presented in this drilling Protocol, based on long experience of specialists in the world. However it is important to examine each case on its merits based on the physician’s ability to perform the procedure, and the state of the patient’s jaw implant transpires with the beginning and there may be changes according to the situation.In principle, we recommend using a drill that its diameter smaller than the diameter of the implant, in the case of soft bone condition. Also, consider using a similar drill diameter implant intended for implantation in the case of hard bone in order to avoid trauma to the bone and ensure rapid bone building around the implant.
Drilling protocol
Perfect collection of Prosthodontics parts
A comprehensive solution for all clinical cases
22 | GDT
Healing Cups
Diameter3.8 mm Slim
Diameter4.6 mm Standart
Diameter5.5 mm Wide
Diameter6 mm Wide
Cat No.Height
GDT-H38022.00 mm
GDT-H38033.00 mm
GDT-H38044.00 mm
GDT-H38055.00 mm
GDT-H38066.00 mm
GDT-H38077.00 mm
Cat No.Height
GDT-H46022.00 mm
GDT-H46033.00 mm
GDT-H46044.00 mm
GDT-H46055.00 mm
GDT-H46066.00 mm
GDT-H46077.00 mm
Cat No.
Cat No.
Height
Height
GDT-H55022.00 mm
GDT-H55033.00 mm
GDT-H55044.00 mm
GDT-H55055.00 mm
GDT-H55066.00 mm
GDT-H55077.00 mm
GDT-H63033.00 mm
GDT-H63044.00 mm
GDT-H63055.00 mm
GDT-H63066.00 mm
GDT-H6307 GDT-H63087.00 mm 8.00 mm
GDT | 23
Straight Abutments
Straight Abutment
Straight Shoulder Abutment
Straight Shoulder Narrow Abutment
Straight Anatomic Abutment
GDT-A59088.5 mm
GDT-A59099.5 mm
GDT-A591111.5 mm
GDT-A591212.5 mm
GDT-A56018.5 mm
GDT-A560210.5 mm
GDT-A6011
Included with all types of abutments
GDT-S8324Screw for abutment
Cat No.Height
Shoulder
Shoulder
Shoulder
Cat No.
Cat No.
Cat No.
Height
Height
Height
1.00 mm 2.00 mm 3.00 mm 4.00 mm 1.70 mm 1.70 mm8.5 mm 9.5 mm 10.5 mm 11.5 mm 9.5 mm
GDT-A4801 GDT-A4802 GDT-A4803 GDT-A4804 GDT-A5001 GDT-A5002Non-Hex
9.5 mm
0.50 mm 1.50 mm 2.50 mm N/A N/A N/A
GDT-A53008.5 mm
GDT-A53018.5 mm
GDT-A53028.5 mm
GDT-A60066.00 mm
GDT-A60088.00 mm 11.00 mm
1.00 mm 2.00 mm 3.00 mm 4.00 mm
GDT-A46019.00 mm
GDT-A460210.00 mm
GDT-A460311.00 mm
GDT-A460412.00 mm
24 | GDT
150 Narrow Top StandartAbutment
150 Narrow StandartAbutment
150 StandartAbutment
150 AnatomicStandartAbutment
GDT-A2807
GDT-A3207
7 mm
7 mm
0.80 mm
GDT-A2809
GDT-A3208
8.5 mm
8.5 mm
1.00 mm
GDT-A2811
GDT-A3209
9 mm
9 mm
2.00 mm
GDT-A321111 mm
3.00 mm 4.00 mm
GDT-A24008.5 mm
GDT-A24019.5 mm
GDT-A240210.5 mm
GDT-A240311.5 mm
GDT-A240412.5 mm
150 Angulated Abutments
Cat No.
Cat No. Cat No.
Height
Height Height
Shoulder
Cat No.Height
GDT-A36099 mm
Included with all types of abutments
GDT-S8324Screw for abutment
GDT | 25
250 Narrow Top StandartAbutment
250 Narrow StandartAbutment
250 StandartAbutment
250 AnatomicStandartAbutment
GDT-A3007
GDT-A3407
7 mm
7 mm
GDT-A30099 mm
GDT-A3011
GDT-A3409
11 mm
9 mm
GDT-A3809
GDT-A3411
9 mm
11 mm
GDT-A26019.5 mm
GDT-A260210.5 mm
GDT-A260311.5 mm
GDT-A260412.5 mm
1.00 mm 2.00 mm 3.00 mm 4.00 mm
250 Angulated Abutments
Shoulder
Cat No.Height
Included with all types of abutments
GDT-S8324Screw for abutment
Cat No.
Cat No.
Cat No.
Height
Height
Height
26 | GDT
BallAttachment
Caps 2.5mmfor BallAttachment
GDT-T3002Silicone Extra soft
GDT-T3003Silicone soft
GDT-T3004Silicone standart
GDT-T3005Peek
Metal Cap For Ball Attachment
GDT-T3001
GDT-T1200 GDT-T12040.5 mm 4 mm
GDT-T1201 GDT-T12051 mm 5 mm
GDT-T1202 GDT-T12062 mm 6 mm
GDT-T1203 GDT-T12073 mm 7 mm
Ball Attachment
Cat No.
Cat No.
Cat No.Height
GDT | 27
Zirconia Abutments
Zirconia Straight AnatomicAbutment
150
Zirconia AnatomicAbutment
250
Zirconia AnatomicAbutment
0.50 mm 1.00 mm 2.00 mm 3.00 mm
Zirconia Narrow Straight Abutment
2.00 mm
GDT-Z45029 mm
150
Zirconia StandartAbutment
GDT-Z45058.5 mm
GDT-Z45109 mm
GDT-Z4520 GDT-Z453010 mm 11 mm
Cat No.Height
Shoulder
Cat No.Height
Shoulder
Cat No.Height
Shoulder
Cat No.Height
Shoulder
Cat No.Height
GDT-Z45099.5 mm
0.50 mm 1.00 mm 2.00 mm 3.00 mm
GDT-Z24009.5 mm
GDT-Z24019.5 mm
GDT-Z2402 GDT-Z240310.5 mm 11.5 mm
0.50 mm 1.00 mm 2.00 mm 3.00 mm
GDT-Z26019.5 mm
GDT-Z26029.5 mm
GDT-Z2603 GDT-Z260410.5 mm 11.5 mm Included with all
types of abutments
GDT-S8324Screw for abutment
28 | GDT
Zirconia Straight AnatomicAbutment
150
ZirconiaAnatomicAbutment
250
Zirconia AnatomicAbutment
0.50 mm
0.50 mm
0.50 mm
1.00 mm
1.00 mm
1.00 mm
2.00 mm
2.00 mm
2.00 mm
3.00 mm
3.00 mm
3.00 mm
Zirconia Narrow Straight Abutment
2.00 mm
GDT-ZB45029 mm
150
Zirconia StandartAbutment
GDT-ZB45099.5 mm
GDT-ZB4505
GDT-ZB2400
8.5 mm
9.5 mm
GDT-ZB4510
GDT-ZB2401
9 mm
9.5 mm
GDT-ZB4520 GDT-ZB4530
GDT-ZB2402 GDT-ZB2403
10 mm
10.5 mm
11 mm
11.5 mm
GDT-ZB26019.5 mm
GDT-ZB26029.5 mm
GDT-ZB2603 GDT-ZB260410.5 mm 11.5 mm
Titanium Base Zirconia Abutments
Shoulder
Cat No.Height
Cat No.Height
Shoulder
Cat No.Height
Shoulder
Cat No.Height
Shoulder
Cat No.Height
Included with all types of abutments
GDT-S8324Screw for abutment
Titanium Base For Individual Zirconia Abutment
Shoulder
Cat No.Height
3.5 mmHexed
3.5 mmNon-Hexed
GDT-ZB83264.3 mm
GDT-ZB83274.3 mm
GDT | 29
Temporary Peek Abutments
Peek Straight AnatomicAbutment
150 Peek AnatomicAbutment
250 Peek AnatomicAbutment
1.00 mm
1.00 mm
2.00 mm
2.00 mm
3.00 mm
3.00 mm
GDT-P4510
GDT-P2401
GDT-P2601
9 mm
9 mm
9 mm
GDT-P4520
GDT-P2402
GDT-P2602
10 mm
10 mm
10 mm
GDT-P4530
GDT-P2403
GDT-P2603
11 mm
11 mm
11 mm
Shoulder
Cat No.Height
Shoulder
Cat No.Height
Shoulder
Cat No.Height
Included with all types of abutments
GDT-S8324Screw for abutment
30 | GDT
Castable Abutments
Castable Straight AnatomicAbutment
150
Castable AnatomicAbutment
1.00 mm
1.00 mm
2.00 mm
2.00 mm
3.00 mm
3.00 mm
GDT-C4510
GDT-C2401
9 mm
9 mm
GDT-C4520
GDT-C2402
10 mm
10 mm
GDT-C4530
GDT-C2403
11 mm
11 mm
250
Castable AnatomicAbutment
1.00 mm 2.00 mm 3.00 mm
GDT-C26019 mm
GDT-C260210 mm
GDT-C260311 mm
CustomCastableAbutment
GDT-C2001UCLA
GDT-C2003NON-HEX
GDT-C2004HEX
Custom Castable NarrowAbutment
GDT-C1001NON-HEX
GDT-C1002HEX
Shoulder
Cat No.Height
Shoulder
Cat No.Height
Shoulder
Cat No.Height
Cat No. Cat No.
Included with all types of abutments
GDT-S8324Screw for abutment
GDT | 31
Impression Components
Transfer For Open Tray
BallTransfer
Transfer For Close Tray
Shoulder
8.00 mm
1.00 mm
12.00 mm
12.00 mm
2.00 mm
12.00 mm
12.00 mm
3.00 mm 4.00 mm 5.00 mm
8.00 mm
Cat No.Diameter
GDT-T4008
GDT-T3801
GDT-T3507
4.75 mm
4.75 mm
3.85 mm
GDT-T4201
GDT-T3802
GDT-T3511
4.30 mm
4.75 mm
4.50 mm
GDT-T4212
GDT-T3803 GDT-T3804 GDT-T3805
GDT-T3601
4.75 mm
4.75 mm 4.75 mm 4.75 mm
4.75 mm
Screw forTransfer
Screw forTransfer
ClickTransfer For Close Tray
Plastic CapFor BallTransfer
ImplantAnalog
GDT-S130713.00 mm
GDT-S161016.00 mm
GDT-S241824.00 mm
Height
9.00 mm
7.00 mm 12.75 mm
13.00 mm 11.80 mm
10.00 mm 12.75 mm
Cat No.Diameter
Height
Cat No.Diameter
GDT-T3409
GDT-T4401 GDT-T6404
4.70 mm
4.75 mm 4.00 mm
GDT-T3413 GDT-T4012
GDT-T4402 GDT-T6405
4.70 mm 4.80 mm
4.75 mm 5.00 mm
Height
Cat No.Diameter
Height
Cat No.Diamter
Height
Cat No.Diameter
Cat No.
Cat No.
Height
Height
32 | GDT
Power Click Straight Abutment
GDT-PCA00 GDT-PCA01 GDT-PCA03 GDT-PCA04 GDT-PCA05
Metal Cap For Power Click Attachment
SiliconeSealed Ring
Indirect Peek Adaptor
Transfer For Power Click Attachment
Peek Hosting For Power Click Attachment
Analog For Power Click Attachment
GDT-PCMC0
GDT-PCSSR
GDT-PCIA0
GDT-PCTR0
GDT-PCPH0
GDT-PCAN0
Power Click Attachmet
Cat No.
Cat No.
Cat No. Cat No. Cat No.
Cat No. Cat No.
GDT | 33
Multi-Units
Multi-Unit Straight Abutment
GDT-M01011.00 mm
GDT-M01022.00 mm
GDT-M0103 GDT-M0104 GDT-M0105 GDT-M01063.00 mm 4.00 mm 5.00 mm 6.00 mm
Multi-Unit Plastic castableSleeve
Healing Cap ForMulti-Unit
Multi-Unit TitanuiemSleeve
Transfer ForMulti-Unit
Multi-UnitShortTitanuiemSleeve
AnalogForMulti-Unit
GDT-MPL01
GDT-M0HC1
GDT-MTI01
GDT-M0TR1
GDT-MTI0S
GDT-M0AN1
Cat No.
Cat No.
Cat No.
Cat No.
Cat No.
Cat No.
Cat No.Height
Included with all types of abutments
GDT-M0SC1Screw for Multi-Unit
34 | GDT
Angulated Multi-Unit Abutment
Multi-Unit Plastic CastableSleeve
Healing Cap ForMulti-Unit
Multi-Unit TitanuiemSleeve
Close Transfer ForMulti-Unit
Open Transfer ForMulti-Unit
Multi-Unit ShortTitanuiemSleeve
AnalogForMulti-Unit
Screw forMulti-UnitIncluded with all typesof abutments
GDT-MU09
GDT-MPLD
GDT-MUHC1
GDT-MUANAD
GDT-MUTRIC
GDT-MOSC1
GDT-MUTRIO
GDT-MUTSDL GDT-MUTSDH
GDT-MU18 GDT-MU30
Angulated Multi-Unit
Cat No.
Cat No.
Cat No.
Cat No. Cat No.
Cat No.
Cat No.
Cat No.
Cat No.
GDT | 35
Esthetic Screw Abutment
Esthetic Screw Abutment
Screw For Esthetic Abutment
Plastic Hexal Sleeve For Esthetic Attachment
Plastic Non Hexal Sleeve For Esthetic Attachment
GDT-AA005
GDT-AAS10
GDT-AAPSL-H GDT-AAPSL
0.50 mm
10.50 mm
GDT-AA010
GDT-AAS11
1.00 mm
11.50 mm
GDT-AA020
GDT-AAS12
2.00 mm
12.50 mm
Cat No.
Cat No.
Cat No. Cat No.
Height
Height
Instruments, Drills& surgical Kits
GDT | 37
Instruments
Driver Hex 1.25 mm
Driver, Hex 2.42 mm Front Ring
Driver, Hex 2.42 mm
Tools
Description
Description
Description
Description
Description
GDT-X1207
GDT-X2407
GDT-X1020
7.00 mm
7.00 mm
Rachet
GDT-X1210
GDT-X1021
10.00 mm
10.00 mm
Tourque Rachet
GDT-X1215
GDT-X1022
GDT-X1023
GDT-X1025
15.00 mm
Surgical Screw Driv-er Hex 2.42 mm
Surgical ScrewLong Driver
Depth Probe
Cat No.
Cat No.
Cat No.
Cat No.
Cat No.
Cat No.
Cat No.
Cat No.
Length
Length
Length
GDT-X2410 GDT-X241515.00 mm
GDT-X26077.00 mm
GDT-X261010.00 mm
GDT-X261515.00 mm
38 | GDT
Stopper Drills
Diameter2.0 mm
Diameter2.5 mm
Diameter3.65 mm
Diameter2.8 mm
Diameter4.2 mm
Diameter3.2 mm
Diameter5.2 mm
GDT-STD20066.00 mm
GDT-STD20088.00 mm
GDT-STD201010.00 mm
GDT-STD201111.50 mm
GDT-STD201313.00 mm
GDT-STD201616.00 mm
GDT-STD25068.00 mm
GDT-STD25088.00 mm
GDT-STD251010.00 mm
GDT-STD251111.50 mm
GDT-STD251313.00 mm
GDT-STD251616.00 mm
GDT-STD36066.00 mm
GDT-STD36088.00 mm
GDT-STD361010.00 mm
GDT-STD361111.50 mm
GDT-STD361313.00 mm
GDT-STD361616.00 mm
GDT-STD28066.00 mm
GDT-STD28088.00 mm
GDT-STD281010.00 mm
GDT-STD281111.50 mm
GDT-STD281313.00 mm
GDT-STD281616.00 mm
GDT-STD42066.00 mm
GDT-STD42088.00 mm
GDT-STD421010.00 mm
GDT-STD421111.50 mm
GDT-STD421313.00 mm
GDT-STD421616.00 mm
GDT-STD3206
GDT-STD5206
6.00 mm
6.00 mm
GDT-STD3208
GDT-STD5208
8.00 mm
8.00 mm
GDT-STD3210
GDT-STD5210
10.00 mm
10.00 mm
GDT-STD3211
GDT-STD5211
11.50 mm
11.50 mm
GDT-STD3213
GDT-STD5213
GDT-STD3216
GDT-STD5216
13.00 mm
13.00 mm
16.00 mm
16.00 mm
Cat No.
Cat No.
Cat No.
Cat No.
Cat No.
Cat No.
Cat No.
Length
Length
Length
Length
Length
Length
Length
GDT | 39
Cat No.
Instruments & Drills
Gang16 mm
Conical16 mm
GDT-D3620
GDT-D3018
2.00 mmGDT-D3625
GDT-D3020
2.50 mmGDT-D3628
GDT-D3025
2.8 mmGDT-D3632
GDT-D3027
3.2 mmGDT-D3636
GDT-D3028
GDT-D3643GDT-D3640
GDT-D3031
GDT-D3652 3.65 mm 4.30 mm 4.00 mm
1.8-2.4 mm 2.0-3.2 mm 2.5-3.7 mm 2.7-4.0 mm 2.7-4.5 mm 3.1-5.5 mm
Trephine
Countersink Marking Extension
Diameter
Cat No.Diameter
Cat No.
Cat No.
Cat No.
Cat No.
Diameter
Diameter
Diameter
Diameter
Short11.5 mm
GDT-D1420 GDT-D1428 GDT-D1432 GDT-D1436 GDT-D1442 GDT-D1452 2.00 mm 2.80 mm 3.20 mm 3.65 mm 4.20 mm 5.20 mm
5.20 mm
GDT-D2020
GDT-D1034
GDT-D2030
GDT-D1056
GDT-D2040
GDT-D3410
GDT-D2050
GDT-D3412
2.00-3.00 mm
3.80-4.20 mm
3.00-4.00 mm
5.00-6.00 mm
4.00-5.00 mm 5.00-6.00 mm
Standard16 mm
GDT-D1220 2.00 mm
GDT-D1225 2.50 mm
GDT-D1228 2.8 mm
GDT-D1232 3.2 mm
GDT-D1236 GDT-D1252GDT-D1242 3.65 mm 5.20 mm 4.20 mm
Countersink Marking Extension
Standard, 16mm
Short, 11.5mm
Trephine
SIG-D1056SIG-D1034Cat. Number
ø5.0-6.0mmø3.8-4.2mmDiameter
SIG-D3410 SIG-D3412
SIG-D1252SIG-D1242SIG-D1236SIG-D1232SIG-D1228SIG-D1225SIG-D1220Cat. Number
ø5.2mmø4.2mmø3.65mmø3.2mmø2.8mm ø2.5mm ø2.0mmDiameter
SIG-D1452SIG-D1442SIG-D1436SIG-D1432SIG-D1428SIG-D1420Cat. Number
ø5.2mmø4.2mmø3.65mmø3.2mmø2.8mm ø2.0mmDiameter
SIG-D2050SIG-D2040SIG-D2030SIG-D2020Cat. Number
ø5.0mm-6.0mmø4.0mm-5.0mmø3.0mm-4.0mmø2.0mm-3.0mmDiameter
Conical, 16mm
Gang, 16mm
Color Code
SIG-D3031SIG-D3028SIG-D3027SIG-D3025SIG-D3020SIG-D3018Cat. Number
ø3.1-5.5mmø2.7-4.5mmø2.7-4.0mmø2.5-3.7mmø2.0-3.2mmø1.8-2.4mmDiameter
SIG-D3652SIG-D3643SIG-D3640SIG-D3636SIG-D3632SIG-D3628SIG-D3625SIG-D3620Cat. Number
ø5.2mmø4.3mmø4.0mmø3.65mmø3.2mmø2.8mmø2.5mmø2.0mmDiameter
Countersink MarkingExtension Trephine Standard / ShortConical
Laser Mark
Color Code
Depth Groove 16mm
13mm11.5mm
10mm8mm6mm ø2.0 ø5.2 ø5.5ø2.8 ø3.65ø3.2 ø4.8ø4.2 ø4.5
INSTRUMENTS AND KITS
Drills
Countersink Marking Extension
Standard, 16mm
Short, 11.5mm
Trephine
SIG-D1056SIG-D1034Cat. Number
ø5.0-6.0mmø3.8-4.2mmDiameter
SIG-D3410 SIG-D3412
SIG-D1252SIG-D1242SIG-D1236SIG-D1232SIG-D1228SIG-D1225SIG-D1220Cat. Number
ø5.2mmø4.2mmø3.65mmø3.2mmø2.8mm ø2.5mm ø2.0mmDiameter
SIG-D1452SIG-D1442SIG-D1436SIG-D1432SIG-D1428SIG-D1420Cat. Number
ø5.2mmø4.2mmø3.65mmø3.2mmø2.8mm ø2.0mmDiameter
SIG-D2050SIG-D2040SIG-D2030SIG-D2020Cat. Number
ø5.0mm-6.0mmø4.0mm-5.0mmø3.0mm-4.0mmø2.0mm-3.0mmDiameter
Conical, 16mm
Gang, 16mm
Color Code
SIG-D3031SIG-D3028SIG-D3027SIG-D3025SIG-D3020SIG-D3018Cat. Number
ø3.1-5.5mmø2.7-4.5mmø2.7-4.0mmø2.5-3.7mmø2.0-3.2mmø1.8-2.4mmDiameter
SIG-D3652SIG-D3643SIG-D3640SIG-D3636SIG-D3632SIG-D3628SIG-D3625SIG-D3620Cat. Number
ø5.2mmø4.3mmø4.0mmø3.65mmø3.2mmø2.8mmø2.5mmø2.0mmDiameter
Countersink MarkingExtension Trephine Standard / ShortConical
Laser Mark
Color Code
Depth Groove 16mm
13mm11.5mm
10mm8mm6mm ø2.0 ø5.2 ø5.5ø2.8 ø3.65ø3.2 ø4.8ø4.2 ø4.5
INSTRUMENTS AND KITS
Drills
40 | GDT
Surgical Kits
ProfessionalSurgical Kit
SmallSurgical Kit
Starter Kit
GDT-PRO-KIT
GDT-BASIC-KIT
GDT-STR-KIT
Cat No.
Cat No.
Cat No.
GDT | 41
Notes
Yizhak Ben-Zvi 9 Apt 64ZIP 8489327 Beer Sheva, Israel
+972-54-7790282
E-Mail: [email protected]: WWW.GDentalT.COM
CE partner4u B.V.Edoomlan 13,3951 DB Maam, Netherlands
www.cepartner4u.eu