2015 tashjian towers catalog part 1 · pdf filecalculations for the complete tower including...

2015 Catalog

TASHJIAN TOWERS CORPORATION 2765 S. Temperance Avenue, Fowler, Ca 93625 Office: (559) 834-4300 Fax: (559) 834-4377 Email: [email protected] Web:www. tashtowers.com

Table of Contents

Introduction……………….……………….………………..1

Engineering Services………………………………….…….3

Guyed and Stacked T-Tower……………….…………….…7

Self-Support Towers……………………………………….23

Tower Trailers……………………………………………...49

Monopoles………………………………………………….62

Stealth Towers……………………………………….…..…65

Construction ………………………………………….…….68

Crank-Up Towers..……………………….………….….…69

Terms and Conditions…………………………………..….91

TASHJIAN TOWERS CORPORATION 2765 S. Temperance Avenue, Fowler, Ca 93625 Office: (559) 834-4300 Fax: (559) 834-4377 Email: [email protected] Web: www.tashtowers.com

Introduction Since 2001, Tashjian Towers has designed and manufactured towers for the communication industry. The corporate objective has remained to provide professionally engineered high quality towers to our customers with their budgets and schedule. Tashjian Towers began engineering and manufacturing towers for the amateur radio operators and has since developed its business to include towers for the much larger market of telecommunications. This catalog covers engineering service, manufactured products and construction service available from Tashjian Towers Corporation.

How to use this Catalog The purpose of this catalog is to provide our customers with a detailed list of the services and products which Tashjian Towers can provide. The catalog is separated into different divisions, engineering, crank-up towers, stack towers, self-supporting towers, tower trailers, poles, and accessories. All parts are identified by part numbers and all part number are cross-referenced to the price list. From the catalog the customer will be able to determine the towers capacity and price. The delivery time for your tower is available by placing a call to Tashjian Towers Sales Department. The customer may select a standard tower kit for some of the Tashjian Towers models. For each of the standard tower kits, Tashjian Towers has assigned a part number. The part number may be used to cross-reference between the catalog information and the price list. For each standard tower kit, a detailed bill of material can be provided. For many of standard tower kits, the maximum allowable projected area which the tower will hold is given for an 85 MPH 3-second gust wind speed and a 100 MPH 3-Second Gust wind speed. These projected areas shown are for budgetary purposes and does not include areas of ladders, cables, antenna mounts, cable ladders, platforms, or any other appurtenances. In the event there may be a question of compliance in the design of a standard catalog tower to state, local, building regulations, or building codes, blueprints and engineering design calculations for your particular site can be supplied at a moderate charge.

History of Towers at Tashjian Towers Tashjian Towers Corporation has three divisions to the business. The primary focus is to provide professional engineering services. The manufacturing division is the second division, which provides towers. The third division is the construction division which installs foundation and erects towers. Karl Tashjian, owner of Tashjian Towers, worked at Tri-Ex Tower Corporation from 1985 to 2000. While at Tri-Ex, Karl was the engineer of record for hundreds of towers and worked on tower designs for the various tower models shown in this catalog. In 1997, International Tower Inc. was formed from Tri-Ex Towers and S&G Communication. ITI specialized in tall towers for the broadcast industry. While at ITI, the engineering group engineered and designed several candelabrum towers approximately 2,000 feet tall, an 1860' tower with a 10' face width in Louisiana, a 1,000 foot tall candelabrum in downtown Atlanta guyed at 35%, along with many other tall heavy towers. In January of 2000, Spectra Site Broadcast group purchased International Tower Inc. Spectra Site closed the engineering offices at the Tri-Ex plant in Visalia in October of 2000, at which time Karl began consulting full time. The old Tri-Ex Towers Corporation was dissolved in California, so Karl incorporated as Tri-Ex Towers Corporation in California in Jan. 2002. In Jan. 2003, the name of the corporation was changed to Tashjian Towers Corporation. In 2010, Tashjian Towers built a 21,000 square foot factory with an additional 2,400 square foot engineering office on 2 acres in Fowler, California.

1

Tashjian Towers Corporation Commercial Tower Division

Tashjian Towers Corporation commercial tower business is organized into eight distinct groups. The groups are Sales, Engineering, Production Control, Fabrication, Weld, Paint, Assembly, and Quality Control. All Tashjian Towers are made in Fowler, California, USA. When a customer calls in to place an order for parts by part number, the sales personnel can determine the delivery date for your product. If the project requires Tashjian Towers to size the tower for the customer, sales will take the required data and forward onto the engineering department for design review. The custom tower design requires from 5 to 7 days to complete, depending on specifications provided by the customer. Sales will send a written quotation via email or fax with scheduled delivery dates. If requesting a hard copy, it shall be mailed. When the sales department receives a purchase order or verbal notice to proceed, a sales order is written and passed on to the production control department. The production control department will request the drawing package from the engineering department. When production control logs the sales order a scheduled ship date will be set. The customer will be advised of this ship date if different from our quotation. The production control department will purchase the raw material and purchase parts required to fill the order. The raw material used in Tashjian Towers meets various standards including American Standard Testing, and Measurement, ASTM, standards. The leg material of the stack and self-supporting tower are high strength steel with a minimum yield of 50,000 psi. Brace material conforms to ASTM A36. Production control will issue work orders to the shop to complete the sales order. The fabrication and weld departments convert the raw material into the black tower. The fabrication department cuts, torches, mills, turns, punches, drills, grinds, etc. the raw material per the drawings while welding uses the GMAW process. Tashjian Towers is particularly proud of the quality of the welding from our weld department. All welders at Tashjian Towers Corporation have American Welding Society, AWS, certification for each process performed at Tashjian Towers. All weld procedures used by Tashjian Towers are qualified by AWS. After welding, the black towers are shipped to the galvanizer. Tashjian Towers transports the towers to galvanizers who are members of the Hot Dipped Galvanizer Associations. All galvanize conforms to ASTM standards. The galvanized towers are packaged for shipment by the assembly department. On request, towers can be painted by Tashjian Towers. FAA factory applied paint is available on request. Quality Control at Tashjian Towers is staffed to meet the requirements of Accreditation Criteria for Fabricator Inspection Programs for Structural Steel per AC172. At all phases of manufacture, quality control checks are made to assure adherence to drawings and specifications. Shipment of towers is accomplished by one of two methods. The first and most common method of shipment is for Tashjian Towers to prepay the freight and bill the customer. The second method is cash on delivery. Larger shipments are sent on dedicated trucks while smaller loads are shipped on common carrier.

2

TASHJIAN TOWERS CORPORATION ENGINEERING SERVICES

Tashjian Towers specializes in tower Engineering, Inspection, Mapping, Documentation, Analysis, Co-Location, Foundation Design and Geotechnical services. For your review, we have enclosed a partial list of our services along with associated costs.

Tower Analysis:

It is assumed that the owner provides all available information. The scope of this work consists of a feasibility study for the installation of customer specific equipment on existing towers. The scope of work includes providing four sets of tower elevations drawings, four sets of tower calculations for the complete tower including the foundation, and four copies of the tower report summarizing the tower findings and recommendations. The report includes tower overstresses if found but does not include the details of the modification to correct these overstresses. Once the owner decides to proceed with the modification, structural calculations are prepare, modification drawings are created, and an estimate of the steel require to modify the tower is produced. The above documentation will be sealed if the tower site is within the one of the states our engineers are licensed: California, Oregon, Arizona, Nevada, Washington, Utah, Texas, Idaho, New Mexico, and Alaska. Up to 100' Pole, Self-Support and Guyed Towers $1,400 100' to 200' Pole, Self-Support and Guyed Towers $1,800 200' plus Self-Support and Guyed Towers $2,200 & up

Tower Inspection, Tower Mapping, and Tower Documentation $1,200 per Site The scope of work for inspection, mapping, and documentation includes the measuring of member sizes, documenting the antenna sizes, antenna elevation, antenna line sizes and location on tower, guy geometry, visual inspection of the tower, photos of the tower, and field report. The client receives a copy of the field inspection notes and photos if requested. The scope includes conducting field investigation and collecting engineering data.

3

Tower Foundation Plans (Standard Plans): $1,500 per Tower Soils report is to be provided by owner or the foundation design will be based on normal soil. The scope of work includes providing four sets of calculations and drawings for the tower foundations including optimizing the size for the tower; reinforcement bars location, size, and weight: anchor bolt locations, in conformance with a customer provided soils report. These standard foundation plans are for standard tower foundations types such as pads, drill and bell foundations, pad to pier, and straight piers.

Custom Tower Foundation Design (Rock Anchor, Water, Others): $2,500 The scope of work includes providing four sets of tower foundation plans for custom tower foundation where rock, water, or other soil conditions other than normal soil conditions exists.

Tower Design: $90 per hour The design team has many years of experience in designing and modifying towers. The typical design cyclical includes layout, design review, fabrication details, submittal of sealed drawing package, and construction drawing package. The design team has completed a wide range of towers including custom crank up towers, self-supporting towers to 400’, guy tower to 2000’, tower trailer units, roof top mounts, stealth designs including water tanks, pine and palm trees, and windmill towers, custom equipment platforms, and custom antenna mounts.

As a tower manufacturer, our design team is aware of the requirements of owners, fabricators, and contractors. Our drawing package are used for obtaining building permits, construction bid walks, construction documents, owners records, fabricator details including weld design, and managers who want their projects on time. We are experience in weld design, galvanized structures, and their effect on warping structures. The design work is done using Cadkey or Solidworks cad software. Autocad formats and electronic files can be provided on completion. Full size prints are available on request while 11 x 17 is the normal format. Tower Site Plans: $2,500 per plus all expenses The scope of work includes taking survey information, customer supplied data, zoning information and creating a site plan showing all existing and proposed structures. An elevation drawing of the tower is shown on the site plan. Typically these plans are used in the permit process.

4

Soils Engineering- Customers scope of work for Geotechnical Services: $3,400 Each This includes all items described in the typical geotechnical specifications. For your information, the price includes two borings, one direct shear test, one consolidation test, five each moisture samples, one chemical analysis, resistivity testing and sieve analysis. The resistivity test adds approximately $500 to the cost above. Four copies of the report will be provided. Other Geotechnical Tests available are: Additional borings (after 2) $250 per Atterberg Limits $125 per Direct Shear Test $150 per Moisture Density $25 per Unconfined Compression Test $100 per Bulk samples for sites requiring cut and fill $25 each Installation of Observation Wells $500 per well 20' deep Rock Coring with ROD results $500 per foot Consolidation Test $150 each Chemical Analysis $75 each Unconsolidated Undrained Triaxial Shear Test $500 each Consolidated Undrained Triaxial Shear Test $625 each California Bearing Ratio or R Value $175 each Expansion Index Test $150 each Consolidated Drained Triaxial Test $660 each Additional Copies of Report Sealed $50 per Please note the above work does not include rock conditions, four-wheel access, or other abnormal soil conditions. The above report is quoted assuming normal soil per TIA/EIA RS 222 Revision G. Normal access is assumed in the above pricing. Other engineering services available are lease exhibits, tower expert at zoning hearings, public works counter service in central California, minor electrical plans, communication building design, communication equipment slab design, review of manufactures drawings and sealing of plans, obtaining quotes for tower construction work, and tower specification writing. Fees may vary depending on complexities. Thank you for the opportunity to be of service. Respectfully, Karl K. Tashjian Owner, Tashjian Towers, RCE

5

Guyed and Stacked T-Towers

7

General

Availab

Designestrength

Utilizes count

Generalo Fo So B

Greater

class.

Compar“15”.

Design ConstrupersonnFinish: WeightJoints:

The informaTashjian Towritten permapplications

l purpose com

ble in heights

ed and fabrich.

superior “Wter-clockwis

l DimensionsFace Width: Side Rails: 1 Bracing: 5/16

strength and

re constructi

eliminates sp

uction: builtnel.

hot dip galv: 50 lb. (per splice tube i

ation containowers Corpomission of Tas submitted

T- TECHNI

mmunication

s from 10 ft.

cated for the

W” bracing cse torsional l

s: 13 7/8" 1/4" O.D. x

6" solid rod

d loading cap

on details an

pecial top an

t in precision

vanized aftersection)

inserts. No ja

ned on this doration, and Tashjian Tow

or in prepar

T-15ICAL DATA

ns tower. (V

to 140 ft. (A

tough jobs w

configurationloads.

.083" Wall

pabilities un

nd you will s

nd base secti

n jigs and ele

r Fabrication

amming dur

drawing or dcannot be re

wers Corporaration.

A SHEET

VHF, UHF, M

Always refer

which call fo

n. Resists clo

nheard of in t

see the big a

ions

ectrically we

n.

ring installat

data sheet is eproduced ofation as it ref

Microwave, a

r to exact ins

or low cost a

ockwise and

the economi

advantage of

elded by cer

ion.

the propertyof used withoefers to paten

and Two Wa

stallation dat

and brute

ical tower

f the model

rtified

y of out the nt

ay)

ta)

8

Available in Utilizes sup General Dimo Face Wo Legs: 1o Bracing

ApplicationMicrowave Systems. Designed fo CONSTRUpersonnel. FINISH: HWEIGHT:JOINTS: S

The informaTashjian Towritten permapplications

n heights fro

perior “W” b

mensions: Width: 19 13/1 1/2” x .120g:7/16" Soli

ns: Antenna rsupport, VH

or truly diffic

UCTION: B

Hot dipped ga 205 lbs. (20

Square heavy

ation containowers Corpomission of Tas submitted

TTECHNIC

om 10 ft. to 2

bracing confi

/16" 0" wall d Rod

radiator – inHF-UHF tran

cult and dem

uilt in precis

alvanized aft0 ft. section)y duty easily

ned on this doration, and Tashjian Tow

or in prepar

T-2CAL DATA

220 ft.

iguration wh

nsulated basensmitting, an

manding jobs

sion jigs and

fter fabricatio, 107 lbs. (1

y aligned flan

drawing or dcannot be re

wers Corporaration.

20 A SHEET

hich resists to

e available. ntenna suppo

s.

d electrically

on. 0 ft. section)nges.

data sheet is eproduced ofation as it ref

orsional load

ort and tropo

y welded by

)

the propertyof used withoefers to paten

ds.

o Scatter

certified

y of out the nt

11

TTwa

AvailablRigidity)

Utilizes sclockwis

General do Face o Legso Braci

ApplicatMicrowaScatter S

Designed ConstrupersonneFinish: hWeight: Joints: s

The informatTashjian Towwritten permapplications

e in heights ).

superior “Wse and counte

dimensions:Width: 26 5: 2" x Variabing: 5/8" sol

ions: antennave Support, Systems.

d for truly di

ction: Built el. hot dip galva400 lbs. Av

square heavy

tion containwers Corpor

mission of Tasubmitted o

TTECHNIC

from 10 ft. t

W” bracing coer-clockwise

5/16” ble wall thiclid rod

na radiator - iVHF-UHF

ifficult and d

in precision

anized after verage (20 fty duty easily

ed on this drration, and cashjian Toweor in prepara

T-2CAL DATA

to 600 ft. (To

onfiguration e loads.

ckness

insulated batransmitting

demanding j

n jigs and ele

fabrication.. section) 20

y aligned flan

rawing or dacannot be repers Corporatation.

6 A SHEET

o 400 feet w

which resist

ase availableg, antenna su

obs.

ectrically we

00 lbs. Avernges.

ata sheet is tproduced oftion as it ref

with excellen

ts torsional

, high rigiditupport and tr

elded by cert

rage (10 ft. s

the propertyf used withoufers to paten

nt

ty ropo

tified

ection)

y of ut the t

14

Designcommu

Constrtriangl

The crsectionCross b

Finish:after fa

Applicmicrow

Also fo

The infproperreprodTowersor in p

ned specificaunications in

ruction: the Te with tubul

oss section sns varies frombracing is bo

: all tower coabrication.

cations: desigwave, CATV

or self-suppo

formation corty of Tashjiaduced of useds Corporatio

preparation.

TTECHNIC

ally for micrnstallations.

T-36 Series Tlar steel legs

size is 42 3/8m 2" to 2 1/2olted to legs

omponents a

gned for largV, AM-FM B

orting install

ontained on an Towers Cd without theon as it refer

T-36AL DATA

rowave and h

Tower is con and cross b

8" on leg cen2” to meet in.

are complete

ge guy commBroadcast.

lations up to

this drawingCorporation,e written perrs to patent a

6 SHEET

heavy duty

nstructed in racing.

nters. Diamenstallation re

ely hot dippe

munications

o 80 feet.

g or data she and cannotrmission of Tapplications

an equilater

eter of leg equirements

ed galvanize

uses;

eet is the t be Tashjian s submitted

ral

.

d

17

Designe

commu

Construequilate

The crosectionsrequirem

Finish: galvaniz

Applicamicrow

Also for

Models T-48X The infopropertyreproduTowers or in pr

TE

ed specificalnications ins

uction: the Teral triangle

oss section sis varies fromments. Cross

All Tower Czed after fab

ations: Desigwave, CATV,

r self-suppor

: T-48 is the

X Utilizes X

formation conty of Tashjianuced of used Corporation

reparation.

T-ECHNICAL

lly for microstallations.

T-48 Series T

with tubular

ize is 55" onm 2 1/2" to 3s bracing is b

Components brication.

gned for larg, AM-FM Br

rting installa

e standard To

X-Bracing

ntained on thn Towers Co

d without the n as it refers

-48

L DATA SH

owave and he

Tower is conr steel legs a

n leg centers. 1/2” to meebolted to leg

are complet

ge guy commroadcast.

ations up to

ower Section

(as require

his drawing orporation, awritten perm

s to patent ap

HEET

eavy duty

nstructed in aand cross bra

. Diameter oet installationgs.

tely hot dipp

munications u

100 feet.

n

ed basis)

or data sheeand cannot bmission of Tpplications s

an acing.

of leg n

ped

uses;

et is the be

Tashjian submitted

20

Self-Supporting Towers

23

TKD Series

Designed specifically for VHF/UHF, various microwave and heavy duty communications installations.

Construction: The TKD Series Tower is constructed in a tubular steel leg configuration. The use of angle or pipe bracing is dependent on required tower sections. The face width and leg size at the base varies depending on section required.

Finish: All tower components are completely hot dipped galvanized after fabrication.

Standard TKD series tower heights range from 40 feet to 200 feet.

Our Engineering staff is ready to develop any custom design for your specific need. Contact our sales representative.

The information contained on this drawing of data sheet is the property of Tashjian Towers Corporation. And cannot be reproduced or used without the written permission of Tashjian Towers Corporation. As it refers to patent applications submitted or in preparation.

24

2765

S T

empe

ranc

e A

ve, F

owle

r, C

a 93

625

2765

S T

empe

ranc

e A

ve, F

owle

r, C

a 93

625

26

No.

Description

Part N

o.

40 ft (L)

40 ft (M)

60 ft (L)

60 ft (M)

80 ft (L)

80 ft (M)

100 ft (L)

100 ft (M)

If Wind Speed =

100 mph per U

BC

Ant. A

rea =>

238 sq ft285 sq ft

86 sq ft129 sq ft

70 sq ft107 sq ft

63 sq ft102 sq ft

If Wind Speed =

100 mph per E

IAA

nt. Area =

>354 sq ft

450 sq ft147 sq ft

214 sq ft128 sq ft

196 sq ft117 sq ft

190 sq ft

If Wind Speed =

70 mph per U

BC

Ant. A

rea =>

570 sq ft678 sq ft

209 sq ft310 sq ft

196 sq ft283 sq ft

189 sq ft270 sq ft

If Wind Speed =

70 mph per E

IAA

nt. Area =

>805 sq ft

1000 sq ft347 sq ft

490 sq ft320 sq ft

459 sq ft300 sq ft

422 sq ft

1T

KD

-301, 20’ Section Assy

150-301000

01

01

01

0

2T

KD


150-302000

00

10

10

1

3T

KD

-302XX

, 20’ Section Assy

150-302670

01

01

01

0

4T

KD


150-303001

01

11

11

1

5T

KD


150-304000

10

00

00

0

6T

KD

-304X, 20’ Section A

ssy150-30430

10

01

11

11

7T

KD


150-305000

10

00

11

1

8T

KD


ssy150-30647

00

00

00

01

9T

KD


150-307000

00

00

00

0

10T

KD


ssy150-30801

00

00

00

00

11T

KD


150-309000

00

00

00

0

12T

KD


160-31006-10

00

00

00

0

13T

KD

-301-304, Top C

ap Assy

200-004153

33

33

33

3

14A

nchor Bolt K

it #1 (3/4” x 48”)150-35010

11

11

11

11

15A

nchor Bolt K

it #2 (1.0” x 48”)150-35046

00

00

00

00

16B

GK

#3, Base G

rounding Kit

968-300001

11

11

11

1

Tow

er Part N

um

ber150-85019

150-85020150-85021

150-85022150-85023

150-85024150-85025

150-85026

Tow

er Weigh

t2463

29452556

31513839

47615449

7041

TK

D Self Supporting T

ower

Ligh

t and M

edium

Tow

er

Quantities R

equired for the Follow

ing Different H

eight

28

No.

Des

crip

tion

Par

t No.

120

ft (

L)

120

ft (

M)

140

ft (

L)

140

ft (

M)

160

ft18

0 ft

200

ft

If W

ind

Spee

d =

100

mph

per

UB

CA

nt. A

rea

=>

50 s

q ft

92 s

q ft

44 s

q ft

82 s

q ft

35 s

q ft

31 s

q ft

28 s

q ft

If W

ind

Spee

d =

100

mph

per

EIA

Ant

. Are

a =

>10

7 sq

ft17

8 sq

ft88

sq

ft17

3 sq

ft83

sq

ft77

sq

ft70

sq

ft

If W

ind

Spee

d =

70

mph

per

UB

CA

nt. A

rea

=>

168

sq ft

248

sq ft

162

sq ft

240

sq ft

150

sq ft

141

sq ft

132

sq ft

If W

ind

Spee

d =

70

mph

per

EIA

Ant

. Are

a =

>28

5 sq

ft40

7 sq

ft26

9 sq

ft39

2 sq

ft25

6 sq

ft24

3 sq

ft22

5 sq

ft

1T

KD

-301

, 20’

Sec

tion

Ass

y15

0-30

100

10

10

11

1

2T

KD

-302

, 20’

Sec

tion

Ass

y15

0-30

200

01

01

00

0

3T

KD

-302

XX

, 20’

Sec

tion

Ass

y15

0-30

267

10

11

11

1

4T

KD

-303

, 20’

Sec

tion

Ass

y15

0-30

300

11

11

11

1

5T

KD

-304

, 20’

Sec

tion

Ass

y15

0-30

400

00

00

00

0

6T

KD

-304

X, 2

0’ S

ectio

n A

ssy

150-

3043

01

11

11

11

7T

KD

-305

, 20’

Sec

tion

Ass

y15

0-30

500

11

11

11

1

8T

KD

-306

X, 2

0’ S

ectio

n A

ssy

150-

3064

71

11

11

11

9T

KD

-307

, 20’

Sec

tion

Ass

y15

0-30

700

01

11

11

1

10T

KD

-308

X, 2

0’ S

ectio

n A

ssy

150-

3080

10

00

11

11

11T

KD

-309

, 20’

Sec

tion

Ass

y15

0-30

900

00

00

01

1

12T

KD

-310

, 20’

Sec

tion

Ass

y16

0-31

006-

10

00

00

01

13T

KD

-301

-304

, Top

Cap

Ass

y20

0-00

415

33

33

33

3

14A

ncho

r Bol

t Kit

#1 (3

/4”

x 48

”)15

0-35

010

11

11

00

0

15A

ncho

r Bol

t Kit

#2 (1

.0”

x 48

”)15

0-35

046

00

00

11

1

16B

GK

#3,

Bas

e G

roun

ding

Kit

968-

3000

01

11

11

11

18T

ower

Par

t N

um

ber

150-

8502

715

0-85

028

150-

8502

9 1

50-8

5030

150-

8503

1 15

0-85

032

150-

8503

3

19T

ower

Wei

ght

7729

9539

1022

713

391

1331

917

587

2206

6

Qua

ntit

ies

Req

uire

d fo

r th

e F

ollo

win

g D

iffe

rent

Hei

ght

TK

D S

elf

Supp

orti

ng T

ower

Lig

ht

and

Med

ium

Tow

er

29

K-Series Towers

Construction: The K-Series Towers are constructed with pipe legs angle braces, 3 or 4 sided.

Finish: All tower components are completely hot dipped galvanized after fabrication.

Standard K series tower heights are 80’, 100’ or 120’.

Our Engineering staff is ready to develop any custom design for your specific need. Contact our sales representative.

The information contained on this drawing of data sheet is the property of Tashjian Towers Corporation. And cannot be reproduced or used without the written permission of Tashjian Towers Corporation. As it refers to patent applications submitted or in preparation.

30

K-Series Towers

Elevation View (K-120 Shown) Plan View

31

Section 4------

Section 3------

Section 2-----

Section 1----

Section 6-------

Section 5-------

Section 4-------

Section 3------

Section 2-----

Section 5-------

Section 4-------

Section 3------

Section 2-----

Section 1----

------80’ ------60’ -----40’ ----20’

------100’

-------80’

-------60’

------40’

-----20’

-----120’ -----100’ ------80’ ------60’

K-80

K-100

K-120

K-S

eries Tow

ers

32

Guyed and Self-Supporting Tower Accessories

Waveguide Ladder Climb Ladder Anti-Climb

Side Arm Antenna Mount

Dish Mount

33

Price List Guy and Self-Supporting Towers and Accessories

34

Tower Price List Description Part No. Weight (lb) Price MODEL T-15 SECTIONS T-15 Standard 10’ Sections 115-0 0301 52 $162.00 T-15 Top Plate 115-0 0303 10 $75.00 T-15 Flat Base 115-00304 18 $69.00 T-15 Concrete Base 115-0 0305 20 $75.00 T-15 Tapered Base Mount 115-00324 46 $241.00 T-15 Tilt Base 115-00422 27 $183.00 T-15 Mast Plate 115-0 0307 7 $57.00 T-15 CDR Plate 115-0 0308 6 $63.00 T-15 Guy Bracket 115-0 0325 8 $40.00 T-15 Guy Bracket w/ Torque Bar 115-00326 14 $89.00 T-15 Torque Arm Assembly 115-0 0311 46 $177.00 T-15 2" Dish Mount 115-0 0327 26 $109.00 T-15 4" Dish Mount 115-0 0375 48 $175.00 T-15 Erection Fixture 115-0 0312 40 $217.00 MODEL T-15 GUY TOWER KITS T-15 40’ Guy Tower Kit 115-0 0424 362 $1,906.00 T-15 50’ Guy Tower Kit 115-0 0425 422 $2,404.00 T-15 60’ Guy Tower Kit 115-0 0426 474 $2,662.00 T-15 70’ Guy Tower Kit 115-0 0427 526 $2,919.00 T-15 80’ Guy Tower Kit 115-0 0428 586 $3,487.00 T-15 90’ Guy Tower Kit 115-0 0429 638 $3,755.00 T-15 100’ Guy Tower Kit 115-0 0430 690 $4,024.00 T-15 110’ Guy Tower Kit 115-0 0431 742 $4,299.00 T-15 120’ Guy Tower Kit 115-0 0432 802 $4,980.00 T-15 130’ Guy Tower Kit 115-0 0433 854 $5,088.00 T-15 140’ Guy Tower Kit 115-0 0434 906 $5,552.00 MODEL T-20 SECTIONS T-20-120, 5’ Section 220-0 0338 64 $241.00 T-20-120, 10’ Section 220-0 0504 112 $375.00 T-20-120, 20’ Section 220-0 0503 207 $635.00 T-20-180, 20’ Section Heavy 220-0 0505 313 $916.00 T-20-180, 20’ Section Heavy (G) 220-00577 335 $1,002.00 T-20 Concrete Base Mount (G) 220-0 0516 60 $234.00 T-20 Flat Base Mount 220-00513 75 $249.00 T-20 Tapered Base Mount 220-00323 122 $575.00 T-20 Top Cap 220-0 0512 2 $12.00 T-20 Top Plate 220-0 0517 42 $137.00 T-20 Beacon Plate 220-0 0305 39 $119.00 T-20 Mast Anchor Plate 220-0 0306 18 $81.00 T-20 Guy Bracket 220-0 0308 33 $132.00 T-20 Guy Bracket w/Torque Bars 220-0 0511 41 $137.00 T-20 Torque Arm Assembly 220-0 0310 89 $275.00 T-20 Mast Flange 220-0 0528 18 $63.00 T-20 Dish Mount 220-0 0312 102 $312.00

35

Tower Price List Description Part No. Weight (lb) Price MODEL T-20 GUY TOWER KITS T-20 40’ Guy Tower Kit 220-00554 622 $2,324.00 T-20 50’ Guy Tower Kit 220-00555 734 $2,667.00 T-20 60’ Guy Tower Kit 220-00556 862 $3,234.00 T-20 70’ Guy Tower Kit 220-00557 974 $3,594.00 T-20 80’ Guy Tower Kit 220-00558 1069 $3,875.00 T-20 90’ Guy Tower Kit 220-00559 1181 $4,224.00 T-20 100’ Guy Tower Kit 220-00560 1378 $5,049.00 T-20 110’ Guy Tower Kit 220-00561 1490 $5,409.00 T-20 120’ Guy Tower Kit 220-00562 1585 $5,707.00 T-20 130’ Guy Tower Kit 220-00563 1697 $6,056.00 T-20 140’ Guy Tower Kit 220-00564 1825 $6,720.00 T-20 150’ Guy Tower Kit 220-00565 1937 $7,098.00 T-20 160’ Guy Tower Kit 220-00566 2032 $7,384.00 T-20 170’ Guy Tower Kit 220-00567 2177 $8,174.00 T-20 180’ Guy Tower Kit 220-00568 2272 $8,455.00 T-20 190’ Guy Tower Kit 220-00569 2384 $8,849.00 T-20 200’ Guy Tower Kit 220-00570 2479 $9,141.00 T-20 210’ Guy Tower Kit 220-00571 2678 $10,349.00 T-20 220’ Guy Tower Kit 220-00572 2773 $10,647.00 MODEL T-20 SELF SUPPORTING TOWER KITS T-20 10’ Self Supporting Tower Kit 220-00574 171 $567.00 T-20 20’ Self Supporting Tower Kit 220-00547 266 $807.00 T-20 30’ Self Supporting Tower Kit 220-00575 171 $1,562.00 T-20 40’ Self Supporting Tower Kit 220-00548 266 $1,826.00 MODEL T-26 SECTIONS T-26 10’ Section .120 Wall 226-00404 191 $533.00 T-26 20’ Section .120 Wall 226-00402 337 $994.00 T-26 20’ Section .120 Wall (G) 226-00359 340 $1105.00 T-26 10’ Section .180 Wall 226-00403 228 $786.00 T-26 20’ Section .180 Wall 226-00401 411 $1,418.00 T-26 20’ Section .120 Wall (G) 226-00360 425 $1,836.00 T-26 10’ Section .250 Wall 226-00406 261 $978.00 T-26 20’ Section .250 Wall 226-00405 477 $1,645.00 T-26 20’ Section .250 Wall (G) 226-00250 490 $1,395.00 T-26 Concrete Base 226-00307 117 $450.00 T-26 Flat Base Mount 226-00426 156 $303.00 T-26 Tapered Base Mount 226-00322 210 $675.00 T-26 Top Plate 226-0 0311 64 $160.00 T-26 Top Cap 226-0 0308 4 $12.00 T-26 Beacon Plate 226-0 0418 64 $160.00 T-26 Guy Bracket 226-0 0317 35 $114.00 T-26 Guy Bracket w/Torque Bars 226-00319 50 $166.00 T-26 Torque Arm Assembly 226-0 0408 109 $327.00 T-26 5’ Standard Mast Flange 226-0 0409 18 $98.00 T-26 Dish Mount 226-0 0414 113 $330.00

36

Tower Price List Description Part No. Weight (lb) Price MODEL T-26-120 SELF SUPPORTING TOWER KITS T-26-120 20’ Self Supporting Tower Kit 226-00500 628 $1,884.00 T-26-120 30’ Self Supporting Tower Kit 226-00501 819 $2,448.00 T-26-120 40’ Self Supporting Tower Kit 226-00502 1053 $3,159.00 T-26-120 50’ Self Supporting Tower Kit 226-00503 1244 $3,670.00 T-26-120 60’ Self Supporting Tower Kit 226-00504 1390 $4,170.00 MODEL T-26-180 SELF SUPPORTING TOWER KITS T-26-180 20’ Self Supporting Tower Kit 226-00505 563 $1,978.00 T-26-180 30’ Self Supporting Tower Kit 226-00506 754 $2,639.00 T-26-180 40’ Self Supporting Tower Kit 226-00507 900 $3,159.00 T-26-180 50’ Self Supporting Tower Kit 226-00508 1091 $3,807.00 T-26-180 60’ Self Supporting Tower Kit 226-00509 1325 $4,650.00 MODEL T-26-250 SELF SUPPORTING TOWER KITS T-26-250 20’ Self Supporting Tower Kit 226-00510 488 $1,621.00 T-26-250 30’ Self Supporting Tower Kit 226-00511 679 $2,464.00 T-26-250 40’ Self Supporting Tower Kit 226-00512 825 $2,953.00 T-26-250 50’ Self Supporting Tower Kit 226-00513 1016 $3,637.00 T-26-250 60’ Self Supporting Tower Kit 226-00514 1162 $4,867.00 MODEL T-36 SECTIONS T-36 Standard 9’ Section 236-0 0402 215 $630.00 T-36X. X-Braced 9’ Section 236-00418 262 $692.00 T-36H, Heavy Duty 9’ Section 236-0 0404 296 $935.00 T-36HX, Heavy Duty, X-Braced 9’Section 236-00432 317 $935.00 T-36EH, Extra Heavy Duty 9’ Section 236-00407 348 $1,061.00 T-36EHX, Extra Heavy Duty X-Braced 9’ Section 236-00433 373 $1,108.00 T-36 Standard 20’ Section 236-0 0401 425 $1,254.00 T-36 Standard 20’ Section 236-0 0401 425 $1,228.00 T-36X, X-Braced 20’ Section 236-00411 510 $1.504.00 T-36H, Heavy Duty, 20’ Section 236-0 0401-2 607 $1,790.00 T-36HX, Heavy Duty, X-Braced 20’ Section 236-00412 632 $1,864.00 T-36EH, Extra Heavy Duty 20’ Section 236-00401-3 722 $2,129.00 T-36EHX, Extra Heavy X-Braced 20’ Section 236-00415 744 $2,194.00 T-36EHX (G), Ex Heavy X-Braced 20’ Section 236-00424 758 $2,213.00 T-36 Concrete Base 236-0 0422 193 $569.00 T-36 Tapered Base Mount 236-00314 404 $1,191.00 T-36 Top Caps 236-0 0315 5 $17.00 T-36 Top Plate 236-0 0438 40 $206.00 T-36 Beacon Plate 236-0 0434 32 $177.00 T-36 Guy Bracket 236-0 0306 90 $265.00 T-36 Torque Arm Assembly 236-0 0427 447 $1318.00 T-36 Dish Mount 236-0 0322 168 $495.00 T-36 5’ Mast Flange 236-0 0426 21 $131.00 MODEL T-36 LIGHT SELF SUPPORTING TOWER KITS T-36 20’ Light Self Supporting Tower Kit 236-00507 658 $1,866.00 T-36 30’ Light Self Supporting Tower Kit 236-00508 868 $2,519.00

37

Tower Price List Description Part No. Weight (lbs) Price T-36 40’ Light Self Supporting Tower Kit 236-00509 1056 $3,009.00 T-36 50’ Light Self Supporting Tower Kit 236-00510 1308 $3,924.00 T-36 60’ Light Self Supporting Tower Kit 236-00511 1626 $4,799.00 T-36 70’ Light Self Supporting Tower Kit 236-00512 1836 $5,509.00 T-36 80’ Light Self Supporting Tower Kit 236-00513 2024 $5,566.00 MODEL T-36 MEDIUM SELF SUPPORTING TOWER KITS T-36 20’ Medium Self Supporting Tower Kit 236-00514 863 $2,589.00 T-36 30’ Medium Self Supporting Tower Kit 236-00515 1092 $3,221.00 T-36 40’ Medium Self Supporting Tower Kit 236-00516 1303 $3,836.00 T-36 50’ Medium Self Supporting Tower Kit 236-00517 1667 $4,884.00 T-36 60’ Medium Self Supporting Tower Kit 236-00518 1878 $5,540.00 T-36 70’ Medium Self Supporting Tower Kit 236-00519 2275 $6,825.00 T-36 80’ Medium Self Supporting Tower Kit 236-00520 2611 $7,833.00 MODEL T-36 HEAVY SELF SUPPORTING TOWER KITS T-36 20’ Heavy Self Supporting Tower Kit 236-00521 998 $2,994.00 T-36 30’ Heavy Self Supporting Tower Kit 236-00522 1296 $3,888.00 T-36 40’ Heavy Self Supporting Tower Kit 236-00523 1643 $4,929.00 T-36 50’ Heavy Self Supporting Tower Kit 236-00524 2054 $6,059.00 T-36 60’ Heavy Self Supporting Tower Kit 236-00525 2401 $7,082.00 T-36 70’ Heavy Self Supporting Tower Kit 236-00526 2624 $7,740.00 T-36 80’ Heavy Self Supporting Tower Kit 236-00527 2896 $8,544.00 MODEL T-48 SECTIONS T-48 Standard 9’ Section 248-0 0402 338 $997.00 T-48X, X-Braced 9’ Section 248-00409 377 $1,131.00 T-48H, Heavy Duty 9’ Section 248-0 0404 387 $1,180.00 T-48HX, Heavy Duty X-Braced 9’ Section 248-00411 426 $1,256.00 T-48EH, Extra Heavy Duty 9’ Section 248-00407 462 $1,386.00 T-48EHX, Extra Heavy X-Braced 9’ Section 248-00413 500 $1,535.00 T-48 Standard 20’ Section 248-00401 668 $1,970.00 T-48X, X-Braced 20’ Section 248-00408 763 $2,250.00 T-48H, Heavy Duty 20’ Section 248-00403 778 $5,165.00 T-48HX, Heavy Duty, X-Braced 20’ Section 248-00410 874 $2,578.00 T-48EH, Extra Heavy Duty 20’ Section 248-00406 943 $2,876.00 T-48EHX, Extra Heavy Duty, X-Braced 20’ Sect. 248-00412 1039 $3,002.00 T-48EHX (G), Extra Heavy Duty X-Braced 20’ Section. 248-00418 1048 $3,071.00 T-48 Concrete Base 248-00405 253 $809.00 T-48 Tapered Base Mount 248-00313 619 $1,857.00 T-48 Top Cap 248-00417 7 $23.00 T-48 Beacon Plate 248-00431 36 $177.00 T-48 Guy Bracket 248-00428 104 $330.00 T-48 Torque Arm Assembly 248-00420 657 $2,299.00 T-48 Dish Mount 248-00309 184 $542.00 T-48 5’ Mast Flange 248-00416 25 $138.00

38

Tower Price List Description Part No. Weight (lb) Price MODEL T-48 LIGHT SELF SUPPORTING TOWER KITS T-48 20’ Light Self Supporting Tower Kit 248-00460 972 $2,673.00 T-48 30’ Light Self Supporting Tower Kit 248-00461 1310 $3,602.00 T-48 40’ Light Self Supporting Tower Kit 248-00462 1640 $4,838.00 T-48 50’ Light Self Supporting Tower Kit 248-00463 2184 $6,442.00 T-48 60’ Light Self Supporting Tower Kit 248-00464 2514 $7,416.00 T-48 70’ Light Self Supporting Tower Kit 248-00465 2947 $8.941.00 T-48 80’ Light Self Supporting Tower Kit 248-00466 3277 $9,334.00 T-48 90’ Light Self Supporting Tower Kit 248-00467 3615 $10,664.00 T-48 100’ Light Self Supporting Tower Kit 248-00468 3945 $11,628.00 MODEL T-48 MEDIUM SELF SUPPORTING TOWER KITS T-48 20’ Medium Self Supporting Tower Kit 248-00469 972 $2,868.00 T-48 30’ Medium Self Supporting Tower Kit 248-00470 1444 $4,259.00 T-48 40’ Medium Self Supporting Tower Kit 248-00471 1830 $5,398.00 T-48 50’ Medium Self Supporting Tower Kit 248-00472 2453 $7,236.00 T-48 60’ Medium Self Supporting Tower Kit 248-00473 2783 $8,209.00 T-48 70’ Medium Self Supporting Tower Kit 248-00474 3216 $9,48700 T-48 80’ Medium Self Supporting Tower Kit 248-00475 2878 $8,490.00 T-48 90’ Medium Self Supporting Tower Kit 248-00476 4090 $12,065.00 T-48 100’ Medium Self Supporting Tower Kit 248-00477 4420 $13,039.00 MODEL T-48 HEAVY SELF SUPPORTING TOWER KITS T-48 20’ Heavy Self Supporting Tower Kit 248-00478 972 $2,770.00 T-48 30’ Heavy Self Supporting Tower Kit 248-00479 1555 $4,431.00 T-48 40’ Heavy Self Supporting Tower Kit 248-00480 1941 $5,531.00 T-48 50’ Heavy Self Supporting Tower Kit 248-00481 2603 $7,418.00 T-48 60’ Heavy Self Supporting Tower Kit 248-00482 2989 $8,518.00 T-48 70’ Heavy Self Supporting Tower Kit 248-00483 3477 $9,905.00 T-48 80’ Heavy Self Supporting Tower Kit 248-00484 3863 $11,809.00 T-48 90’ Heavy Self Supporting Tower Kit 248-00485 4477 $12,714.00 T-48 100’ Heavy Self Supporting Tower Kit 248-00486 4807 $13,699.00 TKD-301 SECTIONS TKD-301 Standard Section 150-30100 526 $1,446.00 TKD-301 Bottom Section 150-30105 526 $1,446.00 TKD-301 Top Section 150-30130 558 $1,534.00 TKD-301X Standard Section Heavy 150-30140 612 $1,683.00 TKD-301X Bottom Section Heavy 150-30145 612 $1,683.00 TKD-301X Top Section Heavy 150-30135 649 $1,785.00 TKD-301SN 10’ Section 150-30164 265 $999.00 TKD-301SN 20’ Section 150-30153 492 $1,353.00 TKD-302 SECTIONS TKD-302 Standard Section 150-30200 688 $1,892.00 TKD-302 Bottom Section 150-30215 688 $1,892.00 TKD-302 Top Section 150-30210 729 $2,004.00 TKD-302X Standard Section Heavy 150-30255 773 $2,133.00 TKD-302X Bottom Section Heavy 150-30260 773 $2,133.00

39

Tower Price List Description Part No. Weight (lb) Price TKD-302X Top Section Heavy 150-30250 819 $2,252.00 TKD-302SN 10’ Straight & Narrow Section 150-30230 354 $1,210.00 TKD-302SN 20’Straight & Narrow Section 150-30273-01 644 $1,771.00 TKD-303 SECTIONS TKD-303 Standard Section 150-30300 1020 $2,805.00 TKD-303 Bottom Section 150-30315 1020 $2,805.00 TKD-303 Top Section 150-30305 1081 $2,972.00 TKD-303X Standard Section Heavy 150-30361 1150 $3,162.00 TKD-303X Bottom Section Heavy 150-30362 1150 $3,122.00 TKD-303X Top Section Heavy 150-30311 1219 $3,352.00 TKD-303SN 10’ Straight & Narrow Section 150-30345 487 $1,495.00 TKD-303SN 20’ Straight & Narrow Section 150-30373 918 $2,616.00 TKD-304 SECTIONS TKD-304 Standard Section 150-30400 1175 $3,231.00 TKD-304 Bottom Section 150-30415 1175 $3,231.00 TKD-304 Top Section 150-30405 1246 $3,421.00 TKD-304X Standard Section Heavy 150-30430 1283 $4,811.00 TKD-304X Bottom Section Heavy 150-30416 1283 $4,811.00 TKD-304X Top Section Heavy 150-3 0456 1360 $3,740.00 TKD-304SN 10’ Straight & Narrow Section 150-30472 730 $2,007.00 TKD-304SN 20’ Straight & Narrow Section 150-30481 1180 $3,245.00 TKD-305 SECTIONS TKD-305 Standard Section 150-30500 1610 $4,427.00 TKD-305 Bottom Section 150-30515 1610 $4,427.00 TKD-305X Standard Section Heavy 150-30552 1875 $5,156.00 TKD-305X Bottom Section Heavy 150-30553 1875 $5,156.00 TKD-306 SECTIONS TKD-306 Standard Section 150-30600 2120 $5,830.00 TKD-306 Bottom Section 150-30615 2120 $5,830.00 TKD-306X Standard Section Heavy 150-30647 2280 $6,270.00 TKD-306X Bottom Section Heavy 150-30648 2280 $6,270.00 TKD-307 SECTIONS TKD-307 Standard Section 150-3 0700 2498 $6,829.00 TKD-307 Bottom Section 150-30715 2498 $6,829.00 TKD-307X Standard Section Heavy 150-30723 2762 $7,595.00 TKD-307X Bottom Section Heavy 150-30724 2762 $7,595.00 TKD-308 SECTIONS TKD-308 Standard Section 150-30800 2754 $7,573.00 TKD-308 Bottom Section 150-30825 2754 $7,573.00 TKD-308X Standard Section Heavy 150-30801 3002 $8,255.00 TKD-308X Bottom Section Heavy 150-30816 3002 $8,255.00

40

Tower Price List Description Part No. Weight (lb) Price TKD-309 SECTIONS TKD-309 Standard Section 150-30900 4268 $11,523.00 TKD-309 Bottom Section 150-30915 4268 $11523.00 TKD-309X Standard Section Heavy 150-30901 4830 $12,800.00 TKD-309X Bottom Section Heavy 150-30916 4830 $12,800.00 TKD-310 SECTIONS TKD-310 Standard Section 150-31006-1 4479 $11,869.00 TKD-310 Bottom Section 150-31006-3 4479 $11,869.00 TKD-310X Standard Section Heavy 150-31006-2 5068 $13,436.00 TKD-310X Bottom Section Heavy 150-31006-4 5068 $13,436.00 TKD-311 SECTIONS TKD-311 Standard Section 150-32001-1 4810 $12,746.00 TKD-311 Bottom Section 150-32005 4479 $12,093.00 TKD-311X Standard Section Heavy 150-32001-2 5380 $14,257.00 TKD-311X Bottom Section Heavy 150-32006 5380 $14,257.00 TKD-401 SECTIONS TKD-401 Standard Section 150-30147 701 $2,103.00 TKD-401 Bottom Section 150-30148 701 $2,103.00 TKD-401 Top Section 150-30146 743 $2,229.00 TKD-401X Standard Section Heavy 150-30150 816 $2,407.00 TKD-401X Bottom Section Heavy 150-30151 816 $2,407.00 TKD-401X Top Section Heavy 150-30149 865 $2,551.00 TKD-401SN 10’ Section 150-30166 353 $1,041.00 TKD-401SN 20’ Section 150-30167 656 $1,962.00 TKD-402 SECTIONS TKD-402 Standard Section 150-30262 917 $2,751.00 TKD-402 Bottom Section 150-30263 917 $2,751.00 TKD-402 Top Section 150-30261 972 $2,916.00 TKD-402X Standard Section Heavy 150-30265 1031 $3,093.00 TKD-402X Bottom Section Heavy 150-30266 1031 $3,093.00 TKD-402X Bottom Section Heavy 150-30266 1031 $3,093.00 TKD-402SN 10’ Strt & Narrow Sec 150-30280 472 $1,534.00 TKD-402SN 20’ Strt & Narrow Sec 150-30277 859 $2,748.00 TKD-403 SECTIONS TKD-403 Standard Section 150-30364 1360 $4,812.00 TKD-403 Bottom Section 150-30365 1360 $4,812.00 TKD-403 Top Section 150-30363 1442 $4,253.00 TKD-403X Standard Section Heavy 150-30367 1533 $4,522.00 TKD-403X Bottom Section Heavy 150-30368 1533 $4,522.00 TKD-403X Top Section Heavy 150-30366 1625 $4,075.00 TKD-403SN 10’ Strt & Narrow Sec 150-30342 649 $4,002.00 TKD-403SN 20’ Strt & Narrow Sec 150-30332 1224 $3,774.00

41

Tower Price List Description Part No. Weight (lb) Price TKD-404 SECTIONS TKD-404 Standard Section 150-30458 1567 $4,701.00 TKD-404 Bottom Section 150-30459 1567 $4,701.00 TKD-404 Top Section 150-30457 1661 $4,983.00 TKD-404X Standard Section Heavy 150-30461 1711 $5,047.00 TKD-404X Bottom Section Heavy 150-30462 1711 $5,047.00 TKD-404X Top Section Heavy 150-30460 1813 $5,348.00 TKD-404SN 10’ Strt & Narrow Sec 150-30426 973 $2,919.00 TKD-404SN 20’ Strt & Narrow Sec 150-30467 1573 $4,640.00 TKD-405 SECTIONS TKD-405 Standard Section 150-3 0554 2147 $6,333.00 TKD-405 Bottom Section 150-3 0555 2147 $6,333.00 TKD-405X Standard Section Heavy 150-3 0557 2500 $7,325.00 TKD-405X Bottom Section Heavy 150-3 0558 2500 $7,325.00 TKD-406 SECTIONS TKD-406 Standard Section 150-30649 2827 $8,339.00 TKD-406 Bottom Section 150-30650 2827 $8,339.00 TKD-406X Standard Section Heavy 150-30651 3040 $8,664.00 TKD-406X Bottom Section Heavy 150-30653 3040 $8,664.00 TKD-407 SECTIONS TKD-407 Standard Section 150-30726 3331 $9,493.00 TKD-407 Bottom Section 150-30727 3331 $9,493.00 TKD-407X Standard Section Heavy 150-30729 3683 $10,496.00 TKD-407X Bottom Section Heavy 150-30730 3683 $10,496.00 TKD-408 SECTIONS TKD-408 Standard Section 150-30726-2 3672 $10,465.00 TKD-408 Bottom Section 150-30727-2 3672 $10,465.00 TKD-408X Standard Section Heavy 150-30729-2 4003 $11,001.00 TKD-408X Bottom Section Heavy 150-30730-2 4003 $11,001.00 TKD-409 SECTIONS TKD-409 Standard Section 150-30726-3 5691 $15,650.00 TKD-409 Bottom Section 150-30727-3 5691 $15,650.00 TKD-409X Standard Section Heavy 150-30729-3 6440 $17,066.00 TKD-409X Bottom Section Heavy 150-30730-3 6440 $17,066.00 TKD-410 SECTIONS TKD-410 Standard Section 150-30726-4 5972 $17,020.00 TKD-410 Bottom Section 150-30727-4 5972 $17,020.00 TKD-410X Standard Section Heavy 150-30729-4 6757 $18,581.00 TKD-410X Bottom Section Heavy 150-30730-4 6757 $18,581.00

42

Tower Price List Description Part No. Weight (lb) Price TKD-411 SECTIONS TKD-411 Standard Section 150-3 0726-5 6413 $16,699.00 TKD-411 Bottom Section 150-3 0727-5 6413 $16,699.00 TKD-411X Standard Section Heavy 150-3 0729-5 7173 $19,725.00 TKD-411X Bottom Section Heavy 150-3 0730-5 7173 $19,725.00 MODEL TKD SELF SUPPORTING TOWER KITS TKD-303 (L) 40’ Self Supporting Tower Kit 150-85019 2463 $7,635.00 TKD-304 (M) 40’ Self Supporting Tower Kit 150-85020 2945 $9,129.00 TKD-303 (L) 60’ Self Supporting Tower Kit 150-85021 2556 $7,923.00 TKD-304X (M) 60’ Self Supporting Tower Kit 150-85022 3151 $9,768.00 TKD-304X (L) 80’ Self Supporting Tower Kit 150-85023 3839 $11,900.00 TKD-305 (M) 80’ Self Supporting Tower Kit 150-85024 4761 $14,759.00 TKD-305 (L) 100’ Self Supporting Tower Kit 150-85025 5449 $16,619.00 TKD-306X (M) 100’ Self Supporting Tower Kit 150-85026 7041 $21,475.00 TKD-306X (L) 120’ Self Supporting Tower Kit 150-85027 7729 $23,573.00 TKD-307 (M) 120’ Self Supporting Tower Kit 150-85028 9539 $29,093.00 TKD-307 (L) 140’ Self Supporting Tower Kit 150-85029 10227 $30,783.00 TKD-308X (M) 140’ Self Supporting Tower Kit 150-85030 13391 $40,173.00 TKD-308X (L) 160’ Self Supporting Tower Kit 150-85031 13319 $40,622.00 TKD-309 180’ Self Supporting Tower Kit 150-85032 17587 $53,640.00 TKD-310 200’ Self Supporting Tower Kit 150-85033 22066 $66,639.00 K-SERIES TOWERS Call for Pricing

43

Tower Price List - Accessories Booms

Description Part No. Weight (lbs) Price

LATTICE TYPE #5 Boom Section, 20 ft 900-0 0420 145 $507.00 Front Antenna Mount for #5 Boom 900-0 0450 28 $125.00 T-20 Boom Section, 20 ft 220-0 0301 168 $655.00 T-20 Boom Section, 10 ft 220-0 0302 306 $994.00 Standard Antenna Mount (#5&T-20 Booms) 900-00451 14 $64.00 Mount Kit, #5/T-20 Boom, for 2.5 900-0 0453 38 $159.00 Mount Kit, #5/T-20 Boom, for 3.0 900-0 0454 39 $152.00 Mount Kit, #5/T-20 Boom, for 4.0 900-0 0469 42 $168.00 Mount Kit, #5/T-20 Boom, for 6.0 900-0 0470 46 $170.00 Mount Kit, #5/T-20 Boom, for 1.5 900-0 0471 35 $145.00 Mount Kit, #5/T-20 Boom, for 2.0 900-0 0472 36 $147.00 Front Antenna Mount for T-20 Boom 220-00530 29 $150.00 SIDE ARM Boom SA-6-1, for 2.0" Pipe Tower Leg 901-00405 42 $166.00 Boom SA-8-1, for 3.0" Pipe Tower Leg 901-00409 56 $224.00 Boom SA-8-2, for 3.0" Pipe Tower Leg 901-00411 62 $240.00 Boom SA-10-2, for 3.0" Pipe Tower Leg 901-00415 72 $280.00 Boom SA-12-2, for 3.0" Pipe Tower Leg 901-00419 81 $320.00 Boom SA-14-2, for 2.0" Pipe Tower Leg 901-00430 196 $784.00 Boom SA-8-2, for 2.5" Pipe Tower Leg 901-00432 60 $240.00 Boom SA-14-2, for 2.5" Pipe Tower Leg 901-00433 86 $344.00 Boom SA-6-1, for 2.0" Tube Tower Leg 901-00434 41 $164.00 Boom SA-8-1, for 2.0" Pipe Tower Leg 901-00437 53 $212.00 Boom SA-8-2, for 2.0" Pipe Tower Leg 901-00438 58 $232.00 Boom SA-4-1, for 3.0" Pipe Tower Leg 901-00441 37 $146.00 Boom SA-4-1, for 2.5" Pipe Tower Leg 901-00444 35 $140.00 Boom SA-10-2, for 2.5" Pipe Tower Leg 901-00445 70 $280.00 Boom SA-12-2, for 2.0" Tube Tower Leg 901-00446 76 $304.00 Boom SA-12-2, for 1.5" Tube Tower Leg 901-00447 74 $286.00 Boom SA-6-1, for 3.0" Pipe Tower Leg 901-00449 47 $188.00 Boom SA-8-2, for 2.0" Tube Tower Leg 901-00451 57 $228.00 Boom SA-6-1, for 1.5" Tube Tower Leg 901-00453 29 $116.00 Boom SA-6-2, for 2.0" Tube Tower Leg 901-00467 49 $200.00 Boom SA-12-2, for 2.5" Pipe Tower Leg 901-00468 79 $320.00 Boom SA-8-1, for 2.5" Pipe Tower Leg 901-00469 55 $220.00 Boom SA-10-1, for 3.0" Pipe Tower Leg 901-00471 66 $264.00 Boom SA-14-2, for 2.0" Tube Tower Leg 901-00478 85 $340.00 Boom SA-12-2, for 2.0" Pipe Tower Leg 901-00481 77 $300.00

44

BoomsDescription Part No. Weight (lb) Price SIDE ARM Boom SA-4-1, for 1.5" Tube Tower Leg 901-00482 29 $116.00 Boom SA-6-1, for 2.5" Pipe Tower Leg 901-00483 45 $186.00 Boom SA-8-1, for 1.5" Tube Tower Leg 901-00484 50 $200.00 Boom SA-10-1, for1.5" Pipe Tower Leg 901-00485 59 $256.00 Boom SA-10-1, for 2.5" Pipe Tower Leg 901-00487 65 $260.00 Boom SA-6-2, for 2.0" Pipe Tower Leg 901-00489 50 $200.00 Boom SA-6-2, for 2.5" Pipe Tower Leg 901-00490 52 $210.00 Boom SA-6-2, for 3.0" Pipe Tower Leg 901-00491 53 $218.00 Boom SA-10-2, for 1.5" Tube Tower Leg 901-00492 65 $266.00 Boom SA-10-2, for 2.0" Pipe Tower Leg 901-00493 68 $275.00 Boom SA-14-2, for 3.0" Pipe Tower Leg 901-00494 90 $360.00 Boom SA-4-1, for 2.0" Pipe Tower Leg 901-00495 32 $128.00 Boom SA-4-1, for 2.0" Pipe Tower Leg 901-00496 31 $124.00 Boom SA-8-1, for 2.0" Tube Tower Leg 901-00497 51 $204.00 Boom SA-10-1, for 2.0" Pipe Tower Leg 901-00498 61 $244.00

TKD Antenna Mounts Description Part No. Weight (lb) Price TKD TAPERED DISH MOUNTS Dish Mount Assembly for 2.0" Pipe Leg 200-00403 24 $195.00 Dish Mount Assembly for 2.5" Pipe Leg 200-00406 25 $205.00 Dish Mount Assembly for 3.0" Pipe Leg 200-00408 26 $215.00 Dish Mount Assembly for 6.0" Pipe Leg 200-00445 34 $236.00 Dish Mount Assembly for 4.0" Pipe Leg 200-00448 29 $223.00 TKD TAPERED FACE DISH MOUNTS Dish Mount Assembly for TKD-301 Face 200-00577 302 $996.00 Dish Mount Assembly for TKD-302 Face 200-00578 322 $1,032.00 Dish Mount Assembly for TKD-303 Face 200-00529 343 $1,093.00 Dish Mount Assembly for TKD-304 Face 200-00526 364 $1,164.00 Dish Mount Assembly for TKD-305 Face 200-00486 388 $1,241.00 Dish Mount Assembly for TKD-306 Face 200-00570 388 $1,241.00 Dish Mount Assembly for TKD-307 Face 200-00488 405 $1,296.00 Dish Mount Assembly for TKD-308 Face 200-00489 420 $1,325.00 Dish Mount Assembly for TKD-309 Face 200-00579 430 $1,350.00

45

Tower Price List - Accessories

TKD Antenna Mounts Description Part No. Weight (lb) Price TKD 2' ONE ARM ANTENNA MOUNTS Antenna Mount Assembly for 4.0" Pipe Leg 150-65010 46 $184.00 Antenna Mount Assembly for 3.0" Pipe Leg 150-65011 42 $168.00 Antenna Mount Assembly for 2.5" Pipe Leg 150-65022 39 $156.00 Antenna Mount Assembly for 2.0" Tube Leg 150-65024 36 $144.00 Antenna Mount Assembly for 6.0" Pipe Leg 200-00479 51 $204.00 TKD 5' TWO ARM ANTENNA MOUNTS Antenna Mount Assembly for 2.0" Pipe Leg 200-00496 104 $416.00 Antenna Mount Assembly for 3.0" Pipe Leg 200-00466 114 $456.00 Antenna Mount Assembly for 2.5"Pipe Leg 200-00467 109 $436.00 Antenna Mount Assembly for 4.0" Pipe Leg 200-00469 119 $476.00 TKD V-MOUNTS V-Mount Assembly for 4.0" Pipe Leg 200-0 0560 210 $840.00 V-Mount Assembly for 2.5 Pipe Leg 200-0 0561 200 $800.00 V-Mount Assembly for 3.0" Pipe Leg 200-0 0562 205 $820.00 V-Mount Assembly for 6.0" Pipe Leg 200-0 0563 215 $860.00 V-Mount Assembly for 2.5" Str Pipe Leg 200-00564 200 $800.00

Waveguide Ladders W.G. LADDERS Waveguide Ladder Assembly, 12" x 20' 902-00421-1 97 $255.00 Waveguide Ladder Assembly, 24" x 20' 902-5001 125 $360.00 W.G. LADDERS MOUNTING KITS Mount Kit #2 (2 1/2"- 3" angle) 902-00420 19 $57.00 Mount Kit #1 (1 1/8"-2" angle) 902-00544 18 $54.00 Mount Kit #3 (3 l/2"-4" angle) 902-00545 20 $60.00 Splice Plate, Waveguide Ladder 902-3 000 4 $21. 00 Splice Plate, 5° angle Waveguide Ladder 902-3002 4 $27.00 Waveguide Ladder Assembly, 24"x10' 904-0 0419 274 $1,0 96.00 Waveguide Ladder Assembly, 24" x 20' 904-00420 549 $2,196.00 Waveguide Ladder Assembly, 48" x 10' 904-00421 408 $1,600.00 Waveguide Ladder Assembly, 48" x 20' 904-00422 803 $2,450.00

46


Waveguide Ladders Description Part No. Weight (lb) Price LADDERS Climb Ladder, 16"x20' 081-4 000 75 $325 .00 Climb Ladder, 16"x10' 081-4 001 37 $195 .00 LADDERS MOUNTING KITS Splice Kit, 5° Angle 916-0 0404 4 $27. 00 Base Kit 916-00407 12 $40.00 TKD Leg Mounting Kit (2.0" pipe) 916-00634 22 $92.00 TKD Leg Mounting Kit (2.5" pipe) 916-00635 24 $97.00 TKD Leg Mounting Kit (3.0" pipe) 916-00636 26 $100.00 TKD Leg Mounting Kit (4.0" pipe) 916-00637 29 $105.00 TKD Leg Mounting Kit (6.0" pipe) 916-00638 38 $110.00 TKD Face Mounting Kit (1/2" hardware) 916-00639 15 $43.00 TKD Face Mounting Kit (5/8" hardware) 916-00640 15 $43.00 TKD Face Mounting Kit (2.0" horizontal pipe) 916-00641 16 $50.00 TKD Face Mounting Kit (2.5" horizontal pipe) 916-00642 17 $51.00 TKD Face Mounting Kit (3.0" horizontal pipe) 916-00643 18 $54.00 SAFETY CLIMB Safety Climb Cable (per foot) 084-0020 --- $1.68 /Foot Safety Climb Kit for Ladder 084-0024 --- $595.00 TKD INSIDE MOUNTING KIT REQUIRES ENGINEERING AVAILABLE UPON REQUEST

47


Anchor Bolt Kits Description Part No. Weight (lbs) Price Anchor Bolt Kit 3/4" x 48" 7.0" sq 150-35010 110 $610.00 Anchor Bolt Kit 3/4" x 48" 8.0” sq. 150-35042 140 $812.00 Anchor Bolt Kit 7/8" x 48" 10.5” sq 150-35045 185 $1,110.00 Anchor King Kit 1.0" x 48" 10.5" sq 150-35046 200 $1,180.00 Anchor Bolt Kit 5/8" x 48" 5.5” sq 150-35047 90 $540.00

Grounding Kits Base Grounding Kit W/1 Rod - BGK-1 968-5001 $95.00 Base Grounding Kit W/2 Rods- BGK-2 968-5002 $145.00 Base Grounding Kit W/3 Rods- BGK-3 968-5003 $175.00 Base Grounding Kit W/4 Rods- BGK-4 968-5004 $220.00

Guying Hardware GUY GRIPS (GALVANIZED) Guy Grip, 3/16" 051-0 340 0.8 $50.00 Guy Grip, 1/4" 051-0 345 1 $5.50 Guy Grip, 5/16" 051-0 350 1.1 $6.80 Guy Grip, 3/8" 051-0 355 1.3 $11.50 Guy Grip, 5/8" 051-0 360 6.5 $44.06 Guy Grip, 1/2" 051-0 365 3.1 $18.00 Guy Grip, 9/16" 051-0 370 4.8 $30.00 THIMBLES (GALVANIZED) PACK OF 5 Thimble, 3/16" Standard Galvanized 051-0 405 0.125 $0.116 Thimble, 1/4" Standard Galvanized 051-0 435 0.1875 $0.134 Thimble, 5/16 Galvanized 051-0 450 0.1875 $1.35 Thimble, 3/8" Galvanized 051-0 455 0.3125 $3.60 Thimble, 1/2" Galvanized 051-0 460 0.625 $3.80 Thimble, 9/16" Galvanized 051-0 465 0.75 $8.30 Thimble, 5/8" Galvanized 051-0 470 1.25 $8.30 SHACKLES (GALVANIZED) Shackle, 3/8" Galvanized 051-0 260 0.25 $4.55 Shackle, 7/16" Galvanized 051-0 265 0.38 $4.10 Shackle, 1/2" Galvanized 051-0 270 0.7 $5.02 Shackle, 5/8" Galvanized 051-0 275 1.5 $9.25 Shackle, 3/4" Galvanized 051-0 320 2.32 $18.50 TURNBUCKLES (GALVANIZED) Turnbuckle, 3/8 x 6 054-1 3061 0.76 $16.35 Turnbuckle, 1/2" x 12" Jaw and Jaw 054-14121 2.06 $10.48 Turnbuckle, 5/8" x 12" Jaw & Jaw 054-0005 3.78 $9.075 48

TASHJIAN TOWERS TOWER/TRAILER

UNITS

49

CT-33 TOWER TRAILER UNIT

TOWER TYPE: Self-supporting, extendable, manual crank-up tower. SPECIFICATIONS: TOWER HEIGHT: Extended 33 feet. Retracted 13 feet. TOWER SUPPORT: Self-supporting, with guys for pointing accuracy. WIND LOADING: Engineering analysis indicates the tower will support 20 square feet of projected area at winds of 85 MPH 3 second gust wind per ANSI/TIA EIA RS 222 Rev G. DEAD LOAD: The maximum dead load is 300 lbs. SECTIONS: The tower is made from 4 each 10 foot welded sections #5, #6, #7 and #8. DESCRIPTION: Tower is complete with 40:1 gearbox, drum and hoisting cables, and an upright tilt winch. The tower is designed to extend the tower telescopic sections uniformly. The tower has pulley frames on two faces. The lifting cable is 1/4 x 7 x 19 aircraft cable. Because of high strength tubing and the bracing of solid rod, this design is considered to be the strongest engineering configuration for towers, yet saves weight, resists torsion load and reduces wind resistance, allowing more useful load to be installed on the tower.

TRAILER TYPE: Single axle equipped with a system of stabilizing and leveling. SPECIFICATIONS: TRAILER SIZE: 7’-5" wide x 17’-7" long TRAILER CAPACITY: 6,000lbs GROSS VEHICLE WEIGHT: 2,250 lbs with Tower DESCRIPTION: The single axle trailer has electric brakes, clearance lights, tail lights, turn signals, brake lights, a tbd pin connection to tow vehicle, adjustable lunette eye attachment ring. The trailer is equipped with an 18 x 18 x 30 inch tool storage box for the storage of pins, tools, racket straps, and other items. There are 4 guy cable reels, which store the guy cables and are mounted on each of the 4 outriggers.

50


TOWER TYPE: Self-supporting, extendable, manual crank-up tower. SPECIFICATIONS:

TOWER HEIGHT: Extended 55 feet. Retracted 21 feet. TOWER SUPPORT: Self-supporting, with guys for pointing accuracy. WIND LOADING: Engineering analysis indicates the tower will support 20 sq ft of

projected area at winds of 85 MPH 3 second gust wind per ANSI/TIA EIA RS 222 Rev G. DEAD LOAD: The maximum dead load is 300 lbs. SECTIONS: The tower is made from 3 each 20 foot welded sections #6, #7 and #8.

DESCRIPTION: Tower is complete with 40:1 gearbox, drum and hoisting cables, and an upright tilt winch. The tower is designed to extend the tower telescopic sections uniformly. The tower has pulley frames on two faces. The lifting cable is 1/4 x 7 x 19 aircraft cable. Because of high strength tubing and the bracing of solid rod, this design is considered to be the strongest engineering configuration for towers, yet saves weight, resists torsion load and reduces wind resistance, allowing more useful load to be installed on the tower. TRAILER TYPE: Single axle equipped with a system of stabilizing and leveling. SPECIFICATIONS: TRAILER SIZE: 7’-5" wide x 17’-7" long TRAILER CAPACITY: 6,000lbs GROSS VEHICLE WEIGHT: 3,000 lbs with Tower DESCRIPTION: The single axle trailer has electric brakes, clearance lights, tail lights, turn signals, brake lights, a tbd pin connection to tow vehicle, adjustable lunette eye attachment ring.

The trailer is equipped with an 18 x 18 x 30 inch tool storage box for the storage of pins, tools, racket straps, and other items. There are

4 guy cable reels, which store the guy cables and are mounted on

each of the 4 outriggers.

51


TOWER TYPE: Self-supporting, extendable, manual crank-up tower. SPECIFICATIONS:

TOWER HEIGHT: Extended 69 feet (70 feet from the ground). Retracted 25’-6”. TOWER SUPPORT: Trailer mounted tower with (1) top level of guy cables. WIND LOADING: Engineering analysis indicates the tower will support 17 square feet of projected area at winds of 85 MPH 3 second gust wind per ANSI/TIA EIA RS 222 Rev G. DEAD LOAD: The maximum dead load is 500 lbs. GROSS VEHICLE WEIGHT: 3,500 lbs with tower SECTIONS: The tower is made from 4 each 20 foot welded sections #5, #6, #7 and #8.

DESCRIPTION: Tower is complete with 40:1 gearbox, drum and hoisting cables, and an upright tilt winch. The tower is designed to extend the tower telescopic sections uniformly. The tower has pulley frames on two faces. The lifting cable is 1/4 x 7 x 19 aircraft cable. Because of high strength tubing and the bracing of solid rod, this design is considered to be the strongest engineering configuration for towers, yet saves weight, resists torsion load and reduces wind resistance, allowing more useful load to be installed on the tower. TRAILER TYPE: Single axle equipped with a system of stabilizing and leveling. SPECIFICATIONS: TRAILER SIZE: 7’-5" wide x 17’-7" long TRAILER CAPACITY: 6,000 lbs DESCRIPTION: The single axle trailer has electric brakes, clearance lights, tail lights, turn signals, brake lights, a tbd pin connection to tow vehicle, adjustable lunette eye attachment ring. The trailer is equipped with an 18 x 18 x 30 inch tool storage box for the storage of pins, tools, racket straps, and other items. There are 4 guy cable reels, which store the guy cables and are mounted on each of the 4 outriggers.

52


TYPE: Tower, Guyed, Extendable, Motorized. SPECIFICATIONS:

TOWER HEIGHT: Extended 84’ (85’ from the ground). Retracted 26 feet. TOWER SUPPORT: Trailer mounted tower with (1) top level of Guy Cables. WIND LOADING: Engineering analysis indicates the tower will support 17 square feet of projected area at the wind speed of 85 mph with 3-second gust per the EIA RS 222 Rev. G. DEAD LOAD: The maximum dead load is 500 lbs. WEIGHT: The tower & trailer GVWR 6,200 pounds. SECTIONS: The tower is made from 5 each 20-foot sections #5, #6, #7, #8, #9.

DESCRIPTION: The DX-86 Tower is designed to be mounted on a tilting frame. The frame is

mounted to a TRA-9 trailer. The tower is raised and lowered with a cable system. The tower is extended with a lift cable driven onto a drum with a 3/4hp electric motor and gearbox. The electrical system has an electric control box and limit switches. The 3/4 hp motor and controls are wired 110 VAC.

The tower is equipped with top guy loops on the #5 section for the attachments of (4) guy cables. The guy cables are guyed to the (4) trailer mounted outriggers, each with a turnbuckle for adjustment.

The tower is mounted horizontal on a frame. It is tilted to the vertical position by cable pulley arrangement driven onto a drum with a 3/4 hp electric motor and gearbox. TRAILER TYPE: Tandem axle trailer with hydraulic surge brakes SPECIFICATIONS:

FRAME SIZE: 7’-4” wide x 20’-0” DESCRIPTION:

The trailer is equipped with tandem 6000 lbs capacity axles and 4 Bias Ply 15” tires. The front axle has hydraulic surge brakes. The trailer has a front jack and four fold out outriggers with jacks to provide a stabilizing and leveling system. The guy cables are guyed to the end of the outriggers. There is a front mounted storage box to store the guy cables and other accessories during transport.

53


TYPE: Tower, Guyed, Extendable, Motorized. SPECIFICATIONS:

TOWER HEIGHT: Extended 101’ (100’ from the ground). Retracted 27 feet. TOWER SUPPORT: Trailer mounted tower with (1) top level of guy cables. WIND LOADING: Engineering analysis indicates the tower will support 17 square feet of projected area at the wind speed of 85 mph with 3- second gust per the EIA RS 222 Rev. G. DEAD LOAD: The maximum dead load is 500 lbs. WEIGHT: The tower & trailer GVWR 6,200 pounds. SECTIONS: The tower is made from 6 each 20-foot sections #4,#5, #6, #7, #8, #9.

DESCRIPTION: The DX-100 Tower is designed to be mounted on a tilting frame. The frame is

mounted to a TRA-9 trailer. The tower is raised and lowered with a cable system. The tower is extended with a lift cable driven onto a drum with a 3/4hp electric motor and gearbox. The electrical system has an electric control box and limit switches. The 3/4 hp motor and controls are wired 110 VAC.

The tower is equipped with top guy loops on the #5 section for the attachments of (4) guy cables. The guy cables are guyed to the (4) trailer mounted outriggers, each with a turnbuckle for adjustment. The tower is mounted horizontal on a frame. It is tilted to the vertical position by cable pulley arrangement driven onto a drum with a 3/4 hp electric motor and gearbox.

TRAILER TYPE: Tandem axle trailer with hydraulic surge brakes SPECIFICATIONS:

FRAME SIZE: 7’-4” wide x 20’-0”

DESCRIPTION: The trailer is equipped with tandem 6000 lbs capacity axles and 4 Bias Ply 15”

tires. The front axle has hydraulic surge brakes. The trailer has a front jack and four fold out outriggers with jacks to provide a stabilizing and leveling system. The guy cables are guyed to the end of the outriggers. There is a front mounted storage box to store the guy cables and other accessories during transport.

54

CT114 TOWER TRAILER UNIT

AB-1309 REPLACEMENT

55

TRAILER

TYPE: Drop deck trailer as manufactured by Great Dane. SPECIFICATIONS:

TRAILER SIZE: 102" wide x 48’ long and 3’-9" high WEIGHT: The tower & trailer GVWR without building 32,000 pounds.

DESCRIPTION:

The trailer is equipped with (2) Onan diesel generators, fuel tank, automatic transfer switch for the generators, battery pack, (8) storage boxes for the storage. SUSPENSION: Model of Suspension - Hendrickson AANT 23K Bogie Location -90'’ Fixed from Rear Dump Valve - Hose Coupler Activated (Automatic) Dump Valve AXLES: Axle Type - Hendrickson Tapered Spindle Standard Wall Brake Size - 16.50'’ x 7.00'’ Brake Actuators - Great Dane Standard 2.5'’ Stroke Brake Lining - Furnished With Suspension Brake Shoe Type - Hendrickson Extended Service Brake Adjusters - Great Dane Standard Automatic 5.50'’ BRAKES/MUDFLAPS: Anti-Lock Brakes - Wabco 2S/1M Easy Stop Optional Diagnostic Cable - None Brake Valves - Sealco Air-Tank Drain Valve - Manual Mudflaps - Great Dane, Smooth Black with Logo Mudflap Mounting Location - On Rear Frame TIRES/WHEELS/H and D: Rim/Disc Wheel Size - 22.5'’ X 8.25'’ Hub/Wheel and Drum - Great Dane Hub Piloted Universal 10 Stud Hub with Outboard Cast Drums Brake Drum Balancing - None-Standard Wheel Type - 22.5'’ Steel Disc Wheel, Hub Piloted, 5HH Wheel Stud Options - Long Studs for Future Alum Wheels Tire Size - 11R 22.5 Tire Brand - Bridgestone R195F (G)

56

DX7114 TOWER

TYPE: Tower, Guyed, Extendable, Motorized.

SPECIFICATIONS: TOWER HEIGHT: Extended 116 feet. Retracted 25 feet. TOWER SUPPORT: Trailer mounted tower with (4) levels of Guy Cables. The tower is designed to be a guyed tower. WIND LOADING: Engineering analysis indicates the tower will support 40 square feet of projected area at winds of 105 MPH with 3-second gust per the EIA RS 222 Rev. G. DEAD LOAD: The maximum dead load is 700 lbs. WEIGHT: The tower & trailer GVWR without building 32,000 pounds. SECTIONS: The tower is made from 7 each 20-foot sections; #4, #5, #6, #7, #8, #9 and #10. DESCRIPTION:

The DX7114 Tower is designed to be mounted on a frame. The frame is mounted to a step deck trailer. The tower is raised and lowered with a cable system. The dual lift cable is driven onto a drum with a 3 hp electric motor and gearbox. The 3 HP electric motor comes with an electric control box and a limit switch wired for 230 Volt single phase 50 hertz power.

The tower is equipped with a top torque arm bolted to the #4 section with attachments for (6) guy cables. The torque arm is capable of holding antennas and rotators. There are three loops on the #10, #8 and #6 sections for attaching three cables to each level. In total there will be three guy cables to the #10 section at 20’, three guy cables to the #8 section at 52 feet, three guy cables to the #6 section at 84 feet and 6 guy cables to the top of the tower at 116 feet.

The tower is mounted horizontal on a frame. It is raised to the vertical position by (2) hydraulic cylinders powered by a hydraulic power unit. The power unit has a 2 HP single phase, 50 hertz motor, a reservoir, and 4 gal per minute pump.

FRAME

TYPE: Welded Space Frame for stabilizing and leveling tower to be attached to a drop deck trailer.

SPECIFICATIONS: Frame SIZE: 7’-6" wide x 24’-6" long and 7’-10" high Frame Weight with tower: 16,000 lbs Frame Weight without Tower: 11,000 lbs without Tower

DESCRIPTION: The frame is equipped with 4 each coax reel, 3 each guy cable reels and 4 each outriggers/ jacks, which

fold out from the frame to provide a stabilizing and leveling system. The outriggers level the trailer with a hydraulic cylinder on each outrigger. The hydraulic cylinders are controlled individually by a hydraulic spool valve with solenoid controls directed by toggle switches located in the main control box. The guy cables can be short guyed to the end of the rear outriggers and front of the trailer.

57


58

TRAILER

TYPE: Drop deck trailer as manufactured by Great Dane.

SPECIFICATIONS: Trailer Size: 102" wide x 48’ long and 3’-9" high WEIGHT: The tower & trailer GVWR without building 32,000 pounds.

DESCRIPTION: The trailer is equipped with (2) Onan diesel generators, fuel tank, automatic transfer switch for the generators, battery pack, (8) storage boxes for the storage. Suspensions Model of Suspension - Hendrickson AANT 23K Bogie Location -90” Fixed from Rear Dump Valve - Hose Coupler Activated (Automatic) Dump Valve Axles Axle Type - Hendrickson Tapered Spindle Standard Wall Brake Size - 16.50” x 7.00” Brake Actuators - Great Dane Standard 2.5” Stroke Brake Lining - Furnished With Suspension Brake Shoe Type - Hendrickson Extended Service Brake Adjusters - Great Dane Standard Automatic 5.50” Brakes/Mudflaps Anti-Lock Brakes - Wabco 2S/1M Easy Stop Optional Diagnostic Cable - None Brake Valves - Sealco Air-Tank Drain Valve - Manual Mudflaps - Great Dane, Smooth Black with Logo Mudflap Mounting Location - On Rear Frame Tires/Wheels/H and D Rim/Disc Wheel Size - 22.5” X 8.25” Hub/Wheel And Drum - Great Dane hub piloted universal 10 stud hub with outboard cast drums Brake Drum Balancing - None-Standard Wheel Type - 22.5” Steel Disc Wheel, Hub Piloted, 5HH Wheel Stud Options - Long Studs for Future Alum Wheels Tire Size - 11R 22.5 Tire Brand - Bridgestone R195F (G)

59

DX6150 TOWER

TYPE: Tower, Guyed, Extendable, Motorized.

SPECIFICATIONS:

TOWER HEIGHT: Extended 150 feet. Retracted 36 feet. TOWER SUPPORT: Skid mounted tower with (4) levels of guy cables. The tower is designed to be a guyed tower. WIND LOADING: Engineering analysis indicates the tower will support 90 square feet of projected area at winds of 85 MPH with 3-second gust per the EIA 222 Rev. G. DEAD LOAD: The maximum dead load is 750 lbs. WEIGHT: The tower & trailer GVWR 32,000 pounds. SECTIONS: The tower is made from 6 each 30-foot sections: #5, #6, #7, #8, #9, and #10.

DESCRIPTION: The DX6150 Tower is designed to be mounted on a frame. The frame is mounted to a step deck trailer.

The tower is raised and lowered with a cable system. The dual lift cable is driven onto a drum with a 3hp electric motor and gearbox. The 3hp electric motor comes with an electric control box and a limit switch wired for 230 Volt single phase 60 hertz power. The tower is equipped with a top torque arm bolted to the #5 section with attachments for (6) guy cables. The torque arm is capable of holding antennas and rotators. There are three loops on the #10, #8 and #6 sections for attaching three cables to each level. In total there will be three guy cables to the #10 section at 30’, three guy cables to the #8 section at 78 feet, three guy cables to the #6 section at 126 feet and 6 guy cables to the top of the tower at 150 feet.

The tower is mounted horizontal on a frame. It is raised to the vertical position by (2) hydraulic cylinders powered by a hydraulic power unit. The power unit has a 2 HP single phase, 60 hertz motor, a reservoir, and 4 gal per minute pump.

FRAME

TYPE: Welded Space Frame for stabilizing and leveling tower to be attached to a drop deck trailer.

SPECIFICATIONS: Frame Size: 7’-6" wide x 24’-6" long and 7’-10" high

Frame Weight with tower: 16,000 lbs

Frame Weight without Tower: 11,000 lbs without Tower

DESCRIPTION: The frame is equipped with 4 each coax reel, 3 each guy cable reels and 4 each outriggers/ jacks, which

fold out from the frame to provide a stabilizing and leveling system. The outriggers level the trailer with a hydraulic cylinder on each outrigger. The hydraulic cylinders are controlled individually by a hydraulic spool valve with solenoid controls directed by toggle switches located in the main control box. The guy cables can be short guyed to the end of the rear outriggers and front of the trailer.

60

Tower Trailer and Accessories Price List Description Part No. Price TOWER TRAILERS CT-25 Manual 25' Tower Trailer Unit, Single Axle, MW-25 500-0066 $11,550.00 CT-33 Manual 33' Tower Trailer unit Single Axle, MW 33 500-0068 $11,950.00 CT-51 Manual 51' Tower Trailer unit Single Axle, W-51 500-0069 $18,500.00 CT-70A Electric 70' Tower Trailer unit Single Axle, LM-470 500-0072 $24,083.00 CT-85 Commercial Tower on Trailer, LM-585 500-0085 $32,309.00 CT-100 Commercial Tower on Trailer, DX-100 500-1000 $39,500.00 CT-114 114' Crank up tower, AB-1309 replacement, DX-114 500-1140 Call CT-150 150’ Commercial Tower on Trailer, DX-6150 500-0150 Call Grasshopper 86' crank up tower on Skid 495-1000 Call Used AB 1309 Quick Erect 117' Crank Up Tower Trailer 500-0101 Call TOWER TRAILER ACCESSORIES Tool Box, 15 x 16 x 48 Galvanized 500-0016 $395.00 Tool Box, 1936 White Undermount Box 500-0018 $295.00 CT-85 Tool Kit 500-0034 $475.00 3.5 KW Generator 061-00016 $2950.00 Three Arm Mount 700-045 $1,350.00 Winch, 12 VDC 4,000 pound winch 500-0104 $1495.00 Spare Tire 500-0042 $475.00 Manual Co Ax Reel 500-00527 $550.00 Electric Co Ax Reel for Trailer 500-00529 $1,750.00 CT-33 Guy Kit 500-0033 $1,250.00 CT-50 Guy Kit 500-0051 $1,350.00 CT-70 Guy Kit 500-0044 $1,450.00 CT-85 Guy Kit 500-0035 $1,550.00 CT-100 Guy Kit 500-0100 $2,500.00 CT-114 Guy Kit 500-0114 $3,250.00 CT-150 Guy Kit 500-0151 $4,000.00

TASHJIAN TOWERS MONOPOLES

The monopole is available as a standard

product in heights of 20’, 40’, 60’, 80’, 100’, 120’ and 140’ .

Maximum antenna loads which can be applied at the top of each model are determined by analysis. Monopoles have an omnidirectional radiation pattern in the horizontal plane. Monopoles are often preferred for aesthetic reasons. Monopoles are frequently customized to meet specific customer needs. Efficient design, compact size and fast

installation.

62

Monopole Price List

Tashjian Towers monopoles show on the previous page are heavy duty, multiple carrier at 90 MPH, high strength, tapered, slip fit, poles. Included in the pole price below are ports near antennas, two large ports near base, anchor bolts, template, grounding kit, top cap, galvanizing, and delivered to most locations in Ca. Engineering and foundation design are included. Sizes and prices are a general guideline. Other pole geometry is available, for example a heavy duty pole is shown but a lighter duty pole can be quoted.

Description Weight Price

40’ Pole 2,90 0 $10, 650

60’ Pole 5,40 0 $16, 200

80’ Pole 7,10 0 $21, 000

100’ Pole 12,5 00 $29, 200

120’ Pole 13,7 00 $32, 000

140’ Pole 22,9 00 $39, 000

64

Stealth Towers and Poles

With the increased interest in aesth etics, Tashjian To wers can design, manufacture, and construct a stealth towe rs and poles in the form o f trees, windmills, water tanks, and towers disguised as comm on structures such as a steeples, to help conceal its presence. Call today for more information.

65

Water Tank Tower

66

Windmill Tower

67

Construction

CONSTRUCTION SERVICES

Tashjian Towers is a licensed C51 Contractor in the State of California. We offer turnkey installation of the towers we produce. We can provide sites surveys, foundation construction, tower erection, antenna and line installations, buildings, building foundation, setting buildings, and fencing. By offering turnkey installations, we can reduce the risk for the tower owner.

Also, we can send our construction crews to map towers for our engineering department. As our crew members are knowledgeable about tower manufacturing, our tower mappings are comprehensive.

Tashjian Towers construction services can provide and set up mobile tower trailers for rental in most California locations.

Rough Order of Magnitude Construction Costs (mobilization not included)

Foundations

Tower Foundation Cubic Yards Price WT-51 2.5 x 2.5 x 5.5 1.3 $1,500 LM-470 3.5 x 3.5 x 7.5 3.4 2,200 T-20 5 x 5 x 5 4.6 3,200 T-26 7 x 7 x 5 9.1 5,900 T-36 9 x 9 x 5 15 8,500 T-48 11 x11 x 5 22 10,900 TKD-301 8 x 8 x 4 9.5 6,000 TKD-302 10x10x 4 14.8 8,500 TKD-303 12x12x 4 21.3 10,900 TKD-304 14x14x4 29 Call TKD-305 16x16x4 40 Call TKD-306 18x18x4 48 Call Erection LM-470 1,800 T-20 40’ 1,500 T-26 60’ 2,700 T-48 80’ 6,500 TKD/26-80’-303 5,900 TKD-120’-306X 11,500 TKD-180’-309 Call

68

Amateur Radio Towers Tashjian Towers Corporation has the objective of engineering, designing, and manufacturing the best crank-up towers in the world. This catalog covers the crank-up tower line of products. The purpose of this catalog is to provide our customers with details of the products that Tashjian Towers can provide. The catalog has general information, tower specifications, and a price list. The catalog lists projected areas for budgetary purposes only. Wind speed requirements may be higher in your specific location. In the event there may be a question of compliance in the design of a tower to state, local, building codes, special engineering calculations and drawings can be prepared at a modest cost. When a customer orders a tower, the ship date, shipping expenses, sales tax, will be determined. Written quotations will be provided and a signed proposal will constitute an order to proceed. Payment is due upon shipment. Larger towers will require a deposit.

69

Model No. MW-33 TYPE: Self-supporting, extendable, manual crank-up tower. SPECIFICATIONS: TOWER HEIGHT: Extended 32’ – 6”. Retracted 11’ – 6”. TOWER SUPPORT: Self-supporting, no guys. W IND LOADING: Engineering analysis indicates the tower will support 25 Square feet of projected

area at winds of 85 MPH 3 second gust wind speed per ANSI/TIA EIA RS 222 Rev. G. DEAD LOAD: The maximum dead load is 300 lbs. WEIGHT: The tower with the base weighs 250 pounds. SECTIONS: The tower is made from four each 10 foot sections, #4, #5, #6 and #7 is the base. DESCRIPTION:

Tower includes a manual crank-up winch and hoisting cables, and a rigid concrete base mount. The tower is designed to extend the tower telescopic sections uniformly. With your purchase, a user manual and one stamped set of drawings and calculation is provided.

This tower has a pulley frame on one face only. The lifting cable is 3/16 x 7 x 19 aircraft cable.

Because of high strength tubing and the bracing of solid rod, this design is considered to be the strongest engineering configuration for towers, yet saves weight, resists torsion load and reduces wind resistance, allowing more useful load to be installed on the tower.

ACCESSORIES: RCB-54 LT (#7 Wide Section) Masts CO-4 for MW-33 M W-33 Manual, Drawings, Calculations TA-54 Special Replacem ent Pulleys #4 rotator plates TB-2 Thrust Bearing Cable Kit for MW-33 Manual Winch 1,550 Pound

70

Model No. MW-33

MW-33 Elevation and Foundation

PLAN VIEW

ELEVATION VIEW (Required Concrete = 1.84 CY)

TOWER CROSS SECTION

71

Model No. WT-51 TYPE: Self-supporting, extendable, manual crank-up tower. SPECIFICATIONS: TOWER HEIGHT: Extended 51’. Retracted 21’-6”. TOWER SUPPORT: Self-supporting, no guys.

WIND LOADING: Engineering analysis indicates the tower will support 13 square feet of projected area at winds of 85 MPH 3 second gust wind speed per ANSI/TIA EIA RS 222 Rev. G.

DEAD LOAD: The maximum dead load is 300 lbs. WEIGHT: The tower with the base weighs 355 pounds. SECTIONS: The tower is made from three each 20 foot sections, #4, #5, and #6 is the base DESCRIPTION:

Tower is complete with a manual crank-up winch and hoisting cables, and a rigid concrete base mount. The tower is designed to extend the tower telescopic sections uniformly. With your purchase, a user’s manual and stamped set drawings and calculations is provided.

This tower has pulley frame on one face only. The lifting cable is 3/16 x 7 x 19 aircraft cable.

Because of high strength tubing and the bracing of solid rod, this design is considered to be the strongest engineering configuration for towers, yet saves weight, resists torsion load and reduces wind resistance, allowing more useful load to be installed on the tower.

ACCESSORIES: RCB-37LT (#6 Wide Section) TB-2 Thrust Bearing CO-3 for WT-51 Masts TA-51 WT-51 Manual, Drawings, Calculations #4 Rotator Plates Replacem ent Pulleys Cable Kit for WT-51 Manual Winch 1,550 Pounds

72

Model No. WT-51

WT-51 Elevation and Foundation

PLAN VIEW


TOWER CROSS SECTION

73

Model No. LM-237

TYPE: Self-supporting, extendable, crank-up tower. SPECIFICATIONS: TOWER HEIGHT: Extended 37’. Retracted 20’ - 6”. TOWER SUPPORT: Self-supporting, no guys.


DEAD LOAD: The maximum dead load is 300 lbs. WEIGHT: The tower with the base weighs 325 pounds. SECTIONS: There are two each 20 foot sections #5 and #6. DESCRIPTION:

Tower is complete with a manual crank-up winch and hoisting cables, and a rigid concrete base mount. The tower comes with a predrilled rotator mounting plate in top section. Note most rotators will fit inside top section. The tower comes with an operation manual and on set of drawings and calculations for the standard tower. The hoisting cable system designed to extend the tower telescopic sections uniformly.

This tower has pulley frame on two faces. The lifting cable is 3/16 x 7 x 19 aircraft cable.

Because of high strength tubing and the bracing of solid rod, this design is considered to be the strongest engineering configuration for tower, yet saves weight, resists torsional loads and reduces wind resistance, allowing more useful load to be installed on the tower.

ACCESSORIES: RCB-37LT (#6 Wide Section) Cable Kit for LM-237 CO-3 for LM-237 Manual Winch TA-37 TB-2 Thrust Bearing #5 Rotator Plates

74

Model No. LM-237

LM-237 Elevation and Foundation

PLAN VIEW


TOWER CROSS SECTION

75

Model No. LM-354E TYPE: Self-supporting, extendable, crank-up tower. SPECIFICATIONS: TOWER HEIGHT: Extended 53’-9”. Retracted 21’-6”. TOWER SUPPORT: Self-supporting, no guys. W IND LOADING: Engineering analysis indicated the tower will support 18 square feet of projected

area at winds of 85 MPH 3 second gust wind speed per ANSI/TIA EIA RS 222 Rev. G. DEAD LOAD: The maximum dead load is 500 lbs. WEIGHT: The tower with the base weighs 660 pounds. SECTIONS: The tower is made from three each 20 foot sections #5, #6 and #7. DESCRIPTION:

Tower is complete with a manual crank-up winch and hoisting cables, and a rigid concrete base mount. The tower comes equipped with a rotator plate, manual and one set of drawings and calculations. Hoisting cable system designed to extend the tower telescopic section uniformly.

This tower has a pulley frame on two faces. The lifting cable is 1/4 x 7 x 19 Aircraft cable.

Because of high strength tubing and the bracing of solid rod, this design is considered to be the strongest engineering configuration for towers, yet saves weight, resists torsion loads and reduces wind resistance, allowing more useful load to be installed on the tower.

ACCESSORIES: RCB-54LT (#7 Wide Section) Cable Kit for LM-354E CO-3 for LM-354E Manual Winch TA-54 TB-2 Thrust Bearing #5 Rotator Plate

76

Model No. LM-354E

LM-354E Elevation and Foundation

PLAN VIEW


TOWER CROSS SECTION

77

Model No. LM-354HD and HDSP TYPE: Self-supporting, extendable, crank-up tower. SPECIFICATIONS: TOWER HEIGHT: Extended 54’. Retracted 21’-6” . TOWER SUPPORT: Self-supporting, no guys.

WIND LOADING: Engineering analysis indicates the tower will support 52 square feet of projected area at winds

of 85 MPH 3 second gust wind speed per ANSI/TIA EIA RS 222 Rev. G. DEAD LOAD: The maximum dead load is 500 lbs. WEIGHT: The tower with the base weighs 960 pounds. SECTIONS: The tower is made from three each 20 foot sections #6, #7 and #8. DESCRIPTION:

Tower is complete with a gearbox, drum and hoisting cables, and a rigid concrete base mount. The tower comes equipped with a manual and one set of drawings and calculations, hoisting cable system designed to extend the tower telescopic sections uniformly.

The LM-354HD uses a manual crank on the gearbox to extend and retract the tower. This tower does not have a positive pull down.

The LM-354HD SP is a motorized version of the above tower, the 1/2 HP electric motor comes with an electric control box and two limit switches. This tower has a positive pull down and has the largest top section offered.

“Positive Control” worm gear winch permits the raising and lowering of LM towers without the aid of stops or locks. LM-354HD uses a 40:1 ratio winch. The LM-354HDSP also includes a pre-wired motor control assembly.

This tower has a pulley frame on two faces. The lifting cable is 1/4 x 7 x 19 Aircraft cable. ACCESSORIES: RCB-70LT (#8 Wide Section) Cable Kit for LM-354HD CO-3 for LM-354HD Manual Winch TA-70 TB-2 Thrust Bearing #6 Rotator Plates

78

Model No. LM-354HD and HDSP

LM-354HD and HDSP Elevation and Foundation

PLAN VIEW


TOWER CROSS SECTION

79

Model No. LM-470 TYPE: Self-supporting, extendable, crank-up tower. SPECIFICATIONS: TOWER HEIGHT: Extended 69’-6”’. Retracted 25’-6”. TOWER SUPPORT: Self-supporting, no guys.


DEAD LOAD: The maximum dead load is 500 lbs. WEIGHT: The tower with the base weighs 1,200 pounds. SECTIONS: The tower is made from 4 each 20 foot sections #5, #6, #7 and #8. DESCRIPTION:

Tower is complete with a gearbox, drum, hoisting cables, and a rigid concrete base mount. The tower comes equipped with a rotator plate, manual and one set of drawings and calculations. Hoisting cable system designed to extend the tower telescopic sections uniformly.

The LM-470 is motorized, and includes 1/2 HP electric motor, electric control box and two limit switches wired for 110. This tower has a positive pull down. “Positive Control” worm gear winch permits the raising and lowering of LM towers without the aid of stops or locks. LM-470 uses a 40:1 ratio winch. The LM-470 also includes a pre-wired motor control assembly. This tower has a pulley frame on two faces and uses 1/4 x 7 x 19 aircraft cable. ACCESSORIES RCB-70LT (#8 Wide Section) LM-470 Manual, Drawings, Calculations CO-4 for LM-470 Replacem ent Pulleys TA-70 Masts #5 Rotor Plates TB-2 Thrust Bearing Cable Kit for LM-470 RLT

80

Model No. LM-470

LM-470 Elevation and Foundation

PLAN VIEW


TOWER CROSS SECTION

81

Model No. DX-86 TYPE: Self-supporting, extendable, crank-up tower. SPECIFICATIONS: TOWER HEIGHT: Extended 86’. Retracted 22’. TOWER SUPPORT: Self-supporting no guys.

WIND LOADING: Engineering analysis indicates the tower will support 20 square feet of projected area at winds

of 85 MPH 3 second gust wind speed per ANSI/TIA EIA RS 222 Rev. G. DEAD LOAD: The maximum dead load is 550 lbs. WEIGHT: The tower with the base weighs 2100 pounds. SECTIONS: The tower is mad from 5 each 20 foot sections #5, #6, #7, #8 and #9. DESCRIPTION:

Tower is complete with a gearbox, drum, hoisting cables, and a rigid concrete base mount. The tower comes equipped with a rotator plate, manual and one set of drawings and calculations. Hoisting cable system designed to extend the tower telescopic sections uniformly.

The DX-86 is a motorized version of the above tower. The 1 HP electric motor comes with an electric control box and two limit switches wired for 220 V. This tower has a positive pull down. “Positive Control” worm gear winch permits the raising and lowering of DX towers without the aid of stops or locks. DX-86 uses a 50:1 ratio winch. The DX-86 also includes a pre-wired motor control assembly.

This tower has a pulley frame on 3 faces and uses 5/16 x 7 x 19 aircraft cable. ACCESSORIES: RCB-86 LT (#9 Wide Section) TB-2 Thrust Bearing CO-6 for DX-86 Masts TA-86 Replacem ent Pulleys #5 Rotator Plates DX-86 manual, Drawings, Calculations Cable Kit for DX-86 RLT

82

Model No. DX-86

DX-86 Elevation and Foundation

PLAN VIEW


TOWER CROSS SECTION

83

TM Series Specifications

Model No. Sections Sizes Max.

Height Min.

Height Winch System Power

Required Vertical Dead

Load Max 70 mph Wind

Allowable Sail Area

TM-358 3 Top: 2-3/8” Bottom: 6-5/8” 58’ 23’ 40:1, 1/2 HP 110 VAC 500 lbs 15 Sq. Ft.

TM-370 3 Top: 4-1/2” Bottom: 8-5/8” 70’ 28’ 40:1, 1 HP 220 VAC 500 lbs 15 Sq. Ft.

TM-370HD 3 Top: 6-5/8” Bottom: 10-3/4” 70’ 28’ 50:1, 1 HP 220 VAC 600 lbs 35 Sq. Ft.

TM-490 4 Top: 4-1/2” Bottom: 10-3/4” 90’ 30’ 50:1, 1 1/2 HP 220 VAC 650 lbs 20 Sq. Ft.

TM-5100RC 5 Top: 2-7/8” Bottom: 10-3/4” 100’ 32’ 50:1, 1 1/2 HP 220 VAC 700 lbs 20 Sq. Ft.

TM SERIES TOWER INFORMATION The aerodynamic design of the slender, tubular TM Tower makes it more aesthetically capable of supporting large antenna loads. Tubular sections used in the TM towers provide a low wind resistance design. The telescopic cabling extends each section uniformly. Aircraft grade galvanized cable of 7 x 19 construction is used on all models. The TM Tower is free standing, without aid of bracket or guys. All TM towers include a hinged base mount that is installed in concrete. This base mount allows the tower to be hinged at ground level and tilted into a vertical position. The TM towers are hot-dipped galvanized finish after fabrication for maintenance free finish. The top section of each tower model is adapted to accept an accessory rotator cage assembly. If a rotator assembly is not desired, the mast adapter can be ordered as an accessory item. All standard mast adapters accommodate a two (2) inch O.D. mast size. ACCESSORIES: CO-3 for TM Work Platform Tilting Gin Pole Rotator Cage Assembly Cable Kit Motor Control Assembly TB-2 Thrust Bearing Remote Control Kit

84

TM Series

Model No. Length Width Depth Required

Concrete Volume (Cubic Yards)

TM-358 36” 36” 6’-0” 2.0 TM-370 42” 42” 8’-3” 3.7

TM-370HD 48” 48” 9’-3” 5.5 TM-490 48” 48” 9’-3” 5.5

TM-5100 48” 48” 10’-3” 6.1

TM Series Concrete Base TM Tower Elevation (TM-370 Shown) 85

A Acceessor

Coax

CO-2 foCO-3 foCO-4 foCO-5 fo

Ro

ries

Standoff

or 2 section tor 3 section tor 4 section tor 5 section t

otator Plat

f Kits

towers towers towers towers

te

Tilt-

Rigid

-Over Acc

Concrete

cessory

e Base 86

T

T

Tilt-O

P

Tilt Accessory iRigid Concre

Over

Position #1

Po

installed on ete Base

r Ac

sition #3

PositionWith theConcrete PositionTilt towe PositionTilt Tow Note: To

cessErection

Tilt-Ov

n #1: Installae Tilt-Over Acce Base, attach t

n #2: Operater to vertical to

n #3: Antennwer over to insta

ower must be n

sory

n of Tower ver Access

ation cessory installetower in horizo

tion o operate tower

na Adjustmeall or adjust an

nested to use Ti

with sory

ed on the Rigidontal position

r

ent ntenna

ilt-Over Acces P

d

ssory Position #2

2

87

Tower Price List

Description Part No. Weight (lb) Price MW-33 33ft Manual Crank-Up Tower 433-00401 340 $2,805.00 WT-51 51ft Manual Crank-Up Tower 451-00501 360 $2,700.00 WT-67 67ft Manual Crank-Up Tower 467-00401 385 $4,125.00 LM Series LM-237 37ft Manual Crank up 437-00401 330 $2,035.00 LM-354E 54ft Manual Crank up 454-00406 525 $3,245.00 LM-354 HD 54ft Manual Crank up with gear box 454-00402 875 $5,225.00 LM-354HDSP 54ft Motorized Crank up with tower 454-00409 950 $6,895.00 LM-470 70ft Motorized Crank up with tower 470-00401 1,100 $8,245.00 LM-584 84ft Motorized Crank up with tower 454-0584 1,500 $12,045.00 DX-70 70ft Motorized Crank up tower 481-0026 2,050 $13,145.00 DX-70HD 70ft Motorized Crank up tower 482-0401 3,500 $15,070.00 DX-86 86ft Motorized Crank up tower 490-59000 2,300 $13,695.00 DX-86HD 86ft Motorized Crank up tower 486-000401 4,000 $16,060.00 DX-100 100ft Motorized Crank up tower 481-0100 2,750 $17,600.00 TM Series TM-358 525-0358 1,750 $7,920.00 TM-370 525-0370 2,100 $10,890.00 TM-370HD 525-0371 3,050 $11,550.00 TM-490 525-0490 3,275 $16,500.00 TM-5100 525-5100 3,350 $20,900.00 TM-5100R 525-00309X 3,450 $24,750.00 Heavy Antenna Mast (2.0” OD x .188” Wall) AD-100H (10' long) 300-00049 37 $185.00 AD-150H (15' long) 300-00050 55 $295.00 AD-200H (20' long) 300-00051 73 $405.00 Extra Heavy Antenna Mast (2.0” OD x .250”) AD-100EH (10' long) 300-00053 47 $255.00 AD-150EH (15' long) 300-00054 71 $400.00 AD-200EH (20' long) 300-00055 94 $470.00 Mast and Rotator Mounting Plates CDR Rotator Plate (WT-51) 480-0000 4 7 $85.00 CDR Rotator Plate (LM-237, LM 354, LM 470) 115-00308 8 $90.00 CDR Rotator Plate (LM354HD) 454-00104 9 $120.00 T2R Rotator Plate (LM-237, LM354, LM470) 460-00128 8 $100.00 T2R Rotator Plate (LM354HD) 454-00117 9 $80.00 TM Rotator cage assembly 525-9490 40 $665.00 Coax Standoff Kits CO-2 Standoff (LM-237) 441-00406 8 $68.00 CO-3 Standoff (WT-51, LM-354E, LM-354HD) 441-00404 12 $112.00 CO-4 Standoff (LM-470) 441-00408 16 $136.00 CO-5 Standoff (DX-86) 441-00411 20 $170.00 Tilt Over Accessories TA-37 (LM-237) 412-00401 120 $695.00 TA-51L (WT-51) 412-00402 120 $695.00 TA-54L (LM354E) 415-00401 137 $760.00 TA-70L (LM354HD & LM470E) 417-00401 149 $760.00 TA-86L (DX-86) 481-00301 179 $2,350.00 GP300TM Sky Needle Ginpole 500-0043 375 $2,800.00

Tower Price List

Description Part No. Weight (lb) Price Manual Winches K1550 Fulton Winch 041-0335 20 $160.00 K2550 Fulton Winch 041-0345 30 $305.00 Thrust Bearing (W & LM Series) TB-2 Bearing 400-00089 10 $185.00 Replacement Concrete Bases RCB-37/51LT (WT51 and LM237) 400-00400 80 $345.00 RCB-54LT (LM354E) 400-00401 86 $360.00 RCB-70LT (LM354HD and LM470E) 460-00170X 129 $395.00 RCB-86LT (DX86) 481-00300 180 $740.00 CB-490 (TM490, TM5100R, TM370HD) 390-00309X 325 $1,105.00 CB-370 (TM370) 370-00308X 325 $695.00 RCB-36 (W36) 400-0136 82 $315.00 Remote Control Kit-Less Motor - Towers must have “Pull down” Capability RLT (purchased with the tower) 370-00328 30 $1,340.00 RLT (purchased separately) 370-00327 30 $1,515.00 Replacement Cable Kits (with cable diagrams) Cable Kit, MW-33 051-0021 25 $135.00 Cable Kit, MW-33 - S.S Version 1/4" 051-0022 25 $205.00 Cable Kit, WT-51 051-0025 16 $100.00 Cable Kit, WT-51 - S.S Version 1/4" 051-0135 16 $185.00 Cable Kit, LM 237 051-0105 13 $100.00 Cable Kit, LM237 - S.S Version 1/4" 051-0110 13 $175.00 Cable Kit, LM354E 051-0115 20 $145.00 Cable Kit, LM354HD 051-0120 41 $295.00 Cable Kit, LM354HD - S.S Version 1/4" 051-0121 41 $520.00 Cable Kit for LM-470 051-0085 80 $520.00 Cable Kit for LM-470 1/4 inch S.S 051-0090 80 $770.00 Cable Kit, DX86 051-0100 106 $660.00 Cable Kit, DX100 051-0095 135 $855.00 Cable Kit, TM370C 051-0125 141 $800.00 Cable Kit, TM370C - S.S Version 051-0126 141 $1015.00 Motor Control Kits (Towers having 40:1 winch ratio) Includes Motor & Control Box MC-50 (1/2HP) 060-50002 60 $715.00 MC-75 (3/4 HP) 060-2935 60 $800.00 MC-100 (1 HP) 060-2936 60 $935.00 Replacement Motors Only 1/2 HP Motor (washdown) 060-0330 20 $460.00 3/4 HP Motor (washdown) 060-0331 25 $565.00 1 HP Motor (washdown) 060-0335 30 $715.00 Manual Control Motor Kits with Top and Bottom Limit Switch (Towers having 40:1 ratio) Includes Motor, Control box, & 2 Limit Switches MC-50 LL (1/2 HP) 060-50000 65 $1,170.00 MC-75LL (3/4 HP) 060-75000 68 $1,310.00 MC-100LL (1 HP) 060-10000 71 $1,470.00 Pulleys Pulley Assembly, 4A/K8 Bearing 045-0125 1 $75.00 Pulley Assembly, 5A/K8 Bearing 045-0150 1 $80.00

TERMS AND CONDTITIONS OF SALE

1. All quotations are for immediate acceptance and subject to change without notice. 2. This quotation is based upon the assumption that the materials required for the items quoted can be obtained from the Steel Mills and/or Seller’s other suppliers within days after approval by Seller, In the event Seller’s suppliers are unable to make deliveries within the period specified, then such delay shall be considered to be a delay in the completion of the work due to causes beyond the control and without the fault or negligence of Seller. Furthermore, the following “force majeure” definition applies: The term “force majeure” as used in this proposal shall mean and include any cause, act or event beyond the control and without the fault or negligence of Seller, including but not restricted to: acts of God; weather; floods; storms; explosion; fires; labor trouble; strikes; insurrection; riots; freight embargoes; acts of the public enemy; items quoted from Seller’s customary suppliers; scarcity of or inability to obtain or use labor or equipment; Federal, State or Local law or orders, rules or regulations of governmental authority, or default of Seller’s subcontractors due to any cause. If by reason of “force majeure” seller is prevented, hindered or delayed in satisfying or meeting any condition of this Quotation or is prevented, hindered or delayed in its performance under this Quotation. Seller shall be excused from such performance to the extent that it is prevented, hindered or delayed thereby, and during the continuous of any such happening or event then this quotation shall be deemed suspended so long as and to the extent that any such cause prevents, hinders or delays the performance, and the time while Seller is so prevented shall not be counted against Seller, anything in this Quotation to the contrary notwithstanding; and Seller shall not by liable for any claims or damages in any form or of an kind of nature for excess costs, if nay , for any failure to perform arising out of or any reason of “force majeure”. Seller shall give written notice to Buyer within a reasonable time after the happening thereof of the nature, and, so far as possible, the extent of any “force majeure” condition referred to in the preceding paragraph hereof, in order that said party may be fully advised as to the nature and extent of said condition. In the event that it appears to Seller that Seller’s performance shall be delayed, Seller shall so state in said written notice in which even the following shall apply; (1) The buyer may, by written notice transmitted to Seller within thirty (30) days after receipt of the above Notice, cancel the undelivered or undeliverable portion of the items quoted without liability except for costs and expenses and a reasonable profit allocable to work done. (2) If the Buyer does not cancel the order in the manner and within the time specified in Paragraph (1) , seller may, by giving to Buyer written notice: (a) Suspend performance on the undeliverable items quoted pending removal of the causes of delay, under which circumstances the Buyer agrees to immediately pay an equitable proportion of the price of the items if such items are not separately priced; (b) Cancel the undeliverable portion of the items quoted at any time as long as the causes of delay continue. (3) If performance is suspended in accordance with (2) (a), the price of the suspended portion of the items quoted shall be subject to revision as follows: (a) Prior to proceeding with the performance of the items quoted Seller shall notify the Buyer of any price revision applicable and obtain written agreement thereto. (b) In the event of failure to agree upon such revised price or prices within the time to be specified in the notice described in Paragraph (3) (a), and Seller does not desire to proceed with performance on the basis of the price of the original items, Seller or Buyer may cancel upon delivery of written notice to the other party, without liability except that of the Buyer for costs and expenses and a reasonable profit, allocable to work done prior to the suspension of performance. (4) Seller shall not be liable for damages in any manner resulting from cancellation or suspension of performance in accordance with the terms of this condition. 3. If construction by others and charges to a designated point are included in the prices herein quoted, we shall not be responsible for switching, spotting, handling storage, demurrage or any charges incurred therefore. 4. Where installation is not included, our responsibility ceases upon delivery of shipments to carrier when sales are f.o.b. point of shipment. Buyers are warned against receiving them until careful inspection has been made. 5. No Federal, State, or local taxes are included in price unless specifically stated in the proposal. All quotations and sales are subject to increase without notice for all present and future Federal, State, and local taxes, including sales, use and excise tax that may be assessed, charged or levied by any governmental action, which taxes are to be added to the quoted price and paid by the Buyer.

90

6. Manufacturer’s guarantee: For a period of one (1) year after shipment, we warrant the article to be reasonably fit for the purpose for which it is Manufactured and sold, and shall be free from defects in material and workmanship. No other warranty to material or workmanship is expressed or implied, and no other claim for damage or charge for labor will be allowed. We reserve the sole right to determine whether or not any part to be replaced is to be furnished free of charge or to be supplied at our regular sales price. 7. Commodities not manufactured by us are warranty and guaranteed only to extent and in the manner warranted and guaranteed to us by the manufacturer and then only to the extent we are able to enforce such warranty or guaranteed. 8. Orders cannot be canceled by Buyer under any circumstances without the Buyer first, reaching an agreement in writing with the Seller covering all damages. In ever event, written permission must be secured prior to returning goods for credit. 9. We reserve the right to change or modify our design and construction and to substitute material equal to or superior to that originally specified. 10. Every effort will e made to maintain shipping schedules shown. However, we shall not be liable for delays or default in filling this order caused by strikes or other disputes, floods, fires, accidents, contingencies or transportation and other causes of like or different character beyond the control of the Seller. 11. No terms or conditions, other than those stated herein and no agreement or understanding, oral or written in any way purporting to modify these terms or conditions whether contained in Buyer’s purchase or shipping release forms or elsewhere shall be binding on Seller, unless hereafter made in writing and signed by Seller’s authorized representative. All proposals, negotiations and representations, if any made prior and with reference hereto are merged herein. 12. Any controversy or claim arising out of or relating to this agreement or the breach thereof shall be settled by arbitration in accordance with the rules of the American Arbitration Association. All hearings shall be oral and shall be held in Tulare County, California. Judgment upon the award rendered by the arbitrate may be entered in any court having jurisdiction thereof and shall be final both as law and fact. 13. If Buyer requires Seller to delay delivery of material, payment for material or services shall not thereby be postponed or extended. Material held in storage for Buyer shall be at the risk and expense of the Buyer and at a price agreed upon by Buyer and Seller at the time of request for storage by buyer, If Buyer removes has order from Seller’s production schedule, then the Buyer automatically relinquishes hiss position in Seller’s production schedule. At time buyer instructs Seller to proceed with order, it must at that time take its position in Seller’s production schedule existing at time order is reentered. 14. This quotation includes unloading tower material from carrier and hauling to maximum of 20 miles to the construction site. Cost of unloading anchor assemblies to be the expense of the Buyer. 15. Where roof top installations are required, tower material and services are furnished to base of tower only, and all roof modifications, waterproofing steel reinforcements to the roof are not included in this quotation unless specifically noted. 16. Shipments and deliveries shall be subject to approval of Seller’s Credit Department. If Buyer fails to fulfill the terms payment, Seller may defer further shipments, or may at its option, cancel the unshipped balance. Seller reserves the right, previous to making any shipments, to require from Buyer satisfactory security for performance of Buyer’s obligations. No failure of Seller to exercise any right acceding from any default of Buyer shall impair Seller’s rights in case of any subsequent default of Buyer. 17. When export license is required, the acceptance of this quotation is subject to export license being granted and supplied by the Buyer unless otherwise specified. 18. The price and delivery of the tower, and the cost and time of the tower, antenna and transmission lines are based upon furnishing and erecting the exact size and type material shown, and at the location indicated. Modification, if any, of these details must be agreed to by both parties in writing, and it is understood that any such modification will require a revision of both price and delivery. 19. Acceptance of all orders must be approved by the home office of this Company. 20. The above provision set for the sole and only obligation or liability of and warranty made by Tashjian Towers Corporation in connection with the items covered by this agreement, and any provisions in any proposals, specifications or in any other provisions hereof, are merely descriptive and are not to be construed as either obligations or warranties made by Tashjian Towers Corporation.

91

CONDITIONS OF SALE – ERECTION OF TOWER 1. This quotation is based on work being carried out in one continuous operation without interruption or delays due to missing materials such as coax lines, transmission line hangers, antenna, reflectors, or electrical power. All material necessary for completing installation to be furnished by Buyer must be o the tower site prior to starting of erection or scheduled in such a manner as to avoid delaying erection crew. 2. Antenna, transmission lines and transmission line clamps must be available when construction work on tower is under way. Drawing showing transmission line installation is to e furnished by customer. 3. Tower site shall be accessible to workmen and erection equipment, using two wheel drive vehicles. 4. This quotation on labor to erect tower and antenna is based upon weather suitable for outdoor construction between the dates of April 15 and November 15. In the event the customer desires the work done under the handicap of snow, ice or severe cold, or between the dates of November 15 and April 15, the cost of erection shall be increased to include the additional cost incurred because of adverse weather conditions, unless otherwise specified in the proposal. 5. Should any conditions exist such that the use of union trades for installation of the tower, accessories and/or foundations are necessary, the prices quoted are subject to adjustment, unless the union stipulation has been specifically noted in the inquiry. 6. Unless provided by Tashjian Towers Corporation, the foundations must be completed so as to permit continuous work from time Seller’s crew reports on the job, and must be finished in accordance with Seller’s specifications. 7. Installation of all wiring and all transmission lines shall be on the tower to the base of the tower only unless otherwise specified. 8. Seller to carry or cause to be carried Workmen’s Compensation, Public Liability and Property Damage Insurance and all Risk Insurance, which is included as part of this quotation and shall be terminated in accordance with the following paragraph. “Upon notice of the date of completion, the customer shall have seven (7) days from such date of completion to accept or reject the structure, If no notice or rejection is received within such timer, the structure shall be considered the customer’s property and our Property Damage Insurance and All risk Insurance on such structure shall be canceled, or should the Buyer commence broadcast operations from the tower before it is accepted the, all Seller’s insurance will terminate after the first day of such broadcast operations.” 9. All fees, service charges, cost of and expense to obtain permits and/or contractor’s licenses to be for the account of the Buyer. 10. This quotation can be changed or varied only by the duty authorized officers of the parties hereto in writing. 11. Whenever regulations require or conditions necessitate working more than an eight (8) hours day and or five (5) day week, all overtime will be charged for in addition to quoted prices. 12. It is also Buyer’s responsibility to: (a) Provide (1) tagline (25 t. wide and equal in length to the height of the tower), cleared of all obstruction in order to permit a truck to be driven thereon. (b) Clear a fire land down each guy radial 25 ft. wide on each side of the guy line, and extend this lane 50 ft. beyond the outer guy anchor; a 10 ft. width of this 150 ft. lane must be cleared of all obstructions in order to permit a truck to be driven thereon. (c) So grade the area immediately surrounding the tower so as to permit the moving of trucks, crane and/or other equipment required to handle and erect the tower. (d) Clear an area 250 ft x 250 ft. adjacent to the center of the tower to permit unloading, sorting, assembling and working space. (e) Provide the necessary wooden horses to support the antenna during construction. (f) Provide necessary fittings and gas required in pressure checking all of the transmission lines. (g) Provide electrical power to the base of the tower. (h) Provide the necessary building and construction permit. (i) Provide the necessary police service to direct traffic if in the event the guy lines should cross a public or private road. (j) Provide toilet facilities if required by regulations. 13. Seller shall not be responsible for delays arising from causes beyond its reasonable control.

92

CONDITIONS OF SALE – FOUNDATION

1. When the foundations are specified as part of this quotation, it is assumed that this work will be done under normal ground conditions with a soil bearing capacity of at least 4,000 lb. Per sq. ft. in accordance with E.I.A. specifications, It shall be their responsibility of the Buyer to supply soil bearing capacity and Seller shall have an absolute right to rely on written test reports furnished by Buyer in the preparation of foundation drawings and in the installation of foundations. Blasting, cribbing, fill, removal of obstruction planking, snow, road building, and clearance for easy access to the site. Existence of swamp, sand, mud, water and frozen ground are not considered normal. If any of the above conditions are encountered, the foundations price shall be increased to include the additional cost incurred, plus a reasonable profit allocable to the work performed.

2. The foundation price does not include clearing a grading of tower site, profiles, or grounding system.

93

2015 tashjian towers catalog part 1 · pdf filecalculations for the complete tower including...

Documents