2015

2nd International Conference on Power Generation Systems and Renewable Energy Technologies

(PGSRET-2015) 10th - 11th June 2105

Conference Program Overview

Partners :

Venue: Faisal Mosque Campus

E-7 Islamabad, Pakistan.

Conference Program Overview

June 10th, 2015 08:30 09:30 Registration

09:30 11:00

Welcome Address Inaugural Speech

Key Note: Dr. Inam-ur- Rahman

11:00 11:30 Tea Break

11:30 13:10

Session 1-A Nuclear Power Generation System and

Technology (Quaid-e-Azam Auditorium)

Session 2-A Ocean Energy and Hydro Power

Generation System and Technologies (Hall - 1)

Session 3-A Renewable Energy- Systems and

Technologies (Hall - 2)

13:10 14:30 Lunch And Prayer Break 14:30 15:10 Key Note: Prof. Dr. Omer Bin Yaaqob, Prof. Dr. Muhammad Shahbaz

15:10 16:10

Session 1-B Nuclear Power Generation System and

Technology (Quaid-e-Azam Auditorium)

Session 4-A Renewable Energy System-Aspects of

material and Structures (Hall - 1)

Session 3-B Renewable Energy- Systems and

Technologies (Hall - 2)

16:10 16:30 Tea Break

16:30 18:10

Session 7-A Mixed Topics

(Quaid-e-Azam Auditorium)

Session 4-B Renewable Energy System- Aspects of

material and Structures (Hall - 1)

Session 3-C Renewable Energy- Systems and

Technologies (Hall - 2)

June 11th, 2015

09:00 10:00 Key Note: Prof. Dr. Adnan I.O.Zaid, Prof.Dr. Nasir Tamin, Prof. Dr. Zafar Iqbal

10:00 11:00

Session 7-B Mixed Topics

(Quaid-e-Azam Auditorium)

Session 4-C Renewable Energy System Aspects of

material and Structures (Hall - 1)

Session 3-D Renewable Energy- Systems

and Technologies (Hall - 2)

11:00 11:30 Tea Break

11:30 13:10

Session 7-C Mixed Topics

(Quaid-e-Azam Auditorium)

Session 5-A Energy System,Technology and

Management (Hall - 1)

Session 3-E Renewable Energy- Systems

and Technologies (Hall - 2)

13:10 14:30 Lunch And Prayer Break

14:30 17:10

Session 6-A Fossil fuels Power Generation system

and Technology (Quaid-e-Azam Auditorium)

Session 5-B Energy System, Technology and

Management (Hall - 1)

Session 4-D Renewable Energy System-

Aspects of material and Structures (Hall - 2)

17:10 18:30 Tea Break/ Panel Discussion/Closing

1

Session -1. Nuclear Power Generation System and Technology

Session -2. Ocean Energy and Hydro Power Generation System and Technologies

Session -3. Renewable Energy- Systems and Technologies

Session -4. Renewable Energy System- Aspects of material and Structures

Session -5. Energy System, Technology and Management

Session -6. Fossil fuels Power Generation system and Technology

Session -7. Mixed Topics The foundation of the Islamic University, Islamabad was laid on the first day of the fifteenth century Hijrah i.e. Muharram 1, 1401 (November 11, 1980). This landmark of the beginning of the new Century symbolizes the aspirations and hopes of the Muslim Ummah for an Islamic renaissance. The university was created to produce scholars and practitioners who are imbued with Islamic ideology, whose character and personality conforms to the teachings of Islam, and who are capable to cater to the economic, social, political, technological and intellectual needs of the Muslim Ummah. Presently 30,000 students are enrolled in the university including 2200 foreigner students in different disciplines. University has two campuses. New Campus is spread over 704 acres of land in H-10 Sector. The Faculty of Engineering and Technology (FET) was established in year 2007 with Department of Electronics Engineering as its first constituent department. The Department of Mechanical Engineering was approved by the Board of Governors and IIUI Academic Council in 2009. This is the second constituent department after the Department of Electronics Engineering under FET at IIUI. Initially MSME program was started in February 2010. With an approval from Pakistan Engineering Council, BSME program is started w. e. f. Fall Semester in September 2010. The course curriculum is in line with the requirements of Higher Education Commission and Pakistan Engineering Council. The department is able to produce the professional engineers those will fulfil the industrial needs of the country. The Department of Mechanical Engineering at the International Islamic University Islamabad intends to provide a firm foundation in Engineering. The BSME students are taught design methodology applied to the disciplines of mechanical engineering in the areas of mechanical design, fluid, thermal and manufacturing systems etc. The FET offers contemporary and essential tools needed in the breadth and depth of engineering disciplines. The curriculum incorporates analytical tools, creative thought and communication skills as offered through courses in the engineering departments. The engineering departments transfer latest know-how to the students to work effectively plus use their expertise as well as leadership, management, planning and organization skills in the job/project. They are trained in the establishment of business and entrepreneurial in the fields of mechanical engineering.

Welcome to DME-FET-IIUI

Technical Sessions

2

The Department of Mechanical Engineering, Faculty of Engineering and Technology, IIUI is sorting out its 2nd International Conference Power Generation Systems and Renewable Energy Technologies (2nd PGSRET) on 10-11 June, 2015 with cooperation of HEC. The two days International Conference will be held in the wonderful Capital City of Pakistan, at the International Islamic University, Old Campus Auditorium (Faisal Masjid), Sector E-8. The Foreign and Pakistani specialists will be welcomed to convey their Keynote talks, contributory addresses and notice presentations on the gathering subjects. The points are chosen to expand on the subject of the conference regarding the new power era innovations and accessible hydro-power limit in Pakistan. This gathering offers an open door for architects, researchers, experts, policymakers, financial specialists and different gatherings to survey late improvements in the vitality frameworks and advancements. The result of the arguments, addresses, presentations and most recent R&D and innovations will help our social orders in Asia and especially in Pakistan to dispose of vitality emergencies and force deficiencies. The specialists will help us amid the examinations and gatherings for conceivable arrangements on our modern and residential vitality creation objectives. The youthful architects/experts will be given an opportunity to present their discoveries on the gathering points. Meeting will give a chance to everybody to come and go along with us in the addresses, presentations with their new thoughts covering everything from a small scale undertaking to a grand venture. The Conference subject covers however many subjects as could be expected under the circumstances, under distinctive fields of power/force era and in addition, renewable frameworks and advances. The conference is supported/sponsored/funded by organizations like HEC, IEEE, HBL. The proceedings of the conference shall be published in IEEE Conference proceedings.

Steering Committee: Rector, IIUI – Patron President, IIUI VP Academics, IIUI VP Higher Studies & Research, IIUI DG Admin Finance & Planning, IIUI Prof. Dr. Amir Qayyum, Chair, Professional Activities, IEEE

Welcome to PGSRET 2015

Conference Committees

3

Organizing Committee: Prof. Dr. Aqdas Naveed Malik, IIUI – Chairman Dr. Saeed Badshah, IIUI – Secretary Dr. Ihsan Ul Haq, IIUI – Treasurer

Prof. Dr. Azzam ul Asar, Chair PES, IEEE Islamabad Prof. Dr. Ahmad Shuja Syed, IIUI

Prof. Dr. M. Afzal Khan, IIUI Prof. Dr. M. Amir Khan, IIUI Dr. Syed Athar Masood, IIUI Dr. Rizwan Nazir, IIUI Dr. Rafi Ullah Khan, IIUI Dr. Suheel Abdullah Malik, IIUI Mr. Sajjad Ahmad, IIUI Mr. M. Amjad Khattack, IIUI Mr. Sakhi Jan Khalil, IIUI Mr. Abbas Raza, IIUI Mr. Aasar Ahmad, IIUI Mrs. Saba Hameed, IIUI Mr. Khurshid Alam, IIUI Mr. Khalid Mehmood Raja, IIUI Mr.Hairan Khattak, IIUI Mr. Adnan Khan, ORIC IIUI

Technical Committee: Prof. Dr. Adnan I.O. Zaid, University of Jordan Prof. Dr. A.H. Yosri Mashal, Taibah University, Saudi Arabia. Prof. Dr. Mohd. Nasir Tamin, UTM Malaysia Prof. Dr. Omar bin Yaakob, UTM Malaysia Prof. Dr. Akhtar Kalam ,Victoria University, Melbourne Australia Prof. Dr Brig. A. Ghafoor, NUST, Islamabad Prof. Dr. Ijaz Mansoor Qureshi, AU, Islamabad Prof. Dr. Muhammad Ijaz, Hitec Uni., Taxila Prof. Dr. Zafar M. Khan, IST Univ., Islamabad Prof. Dr. M. Nawar Khan, NUST, Islamabad Prof. Dr. M. Zafarullah Koreshi, AU, Islamabad Prof. Dr. Shahab Khushnood, UET, Taxila Prof. Dr. M. Zubair Khan, IST Univ, Islamabad Prof. Dr. Syed Kamran Aafaq, Hitec Univ., Taxila Prof. Dr. M. Abid, COMSAT Univ., Wah Dr. Qasim Zeeshan, Adjunct Faculty, IST, Islamabad Dr. Muhammad Adil Khattak, UTM Malaysia Dr. Muhammad Uzair Khan, Secretary IEEE, Islamabad Section

4

Parking shall be provided at the parking area of Faisal Mosque Campus, IIU, Sector E7, Margalla Hills, Islamabad, Pakistan. Kindly bring your Invitation card to avail the facility.

Location

Parking

5

Day- 1 Wednesday, June 10, 2015

08:30 09:30

Event details/venue : Registration(Reception desk, Quaid-e-Azam Auditorium)

09:30 11:00

Plenary Session Venue: Quaid-e-Azam Auditorium

Welcome Note

PGSRET 2015 Inaugural Speech Key Note: Nuclear Energy as a Green Energy Option

By Dr. Inam Ur Rehman 11:00 11:30 Tea Break

Session 1-A (Nuclear Power Generation System and Technology)

Venue: Quaid-e-Azam Auditorium Session Chair: Mr. Tariq Sulejia

TIME SPEAKER NAME PAPER TITLE 11:30 11:50

Muhammad Sohail, Myung Hyun Kim

Multi-group crossection for new group structure using weighting spectrum for sodium cooled fast reactor

11:50 12:10

Zafar Koreshi The 4S Reactor: An Educational Model for Universities

12:10 12:30

Rustam Khan,Ghulam Jaffar,Qazi Syed Muhammad Ziaulhaque

Nuclear Education and Training for Nuclear Power

12:30 12:50

Aown Arshad Gillani,Muhammad Naveed Khan,Rustam Khan

Radioactive Waste Analysis of CNPP-1 (PWR) Spent Nuclear Fuel

12:50 13:10

Amjad Aslam,Sikander Majid Mirza,Nasir Majid Mirza, Rustam Khan

Spent Fuel Analysis of Material Test Research Reactor using ORIGEN2 Computer Code

Session 2-A(Ocean Energy and Hydro Power Generation System and Technologies Venue: Hall-1

Session Chair: Prof. Dr. Omar Bin Yaaqob 11:30 11:50

Danial Naeem Qaisar, Dr. Muhammad Bilal Khan

Investing in Hydro Power Sector for Pakistan’s Energy Security

11:50 12:10

Hudair Samad, Muneeb Ali Husaain, Faizaan Mumtaz, Mujahid Badsahah, Muhammad Adil Khattak

Design and experimental validation of down scale horizontal axis ocean current turbine

12:10 12:30

Yasir Sagheer Abbasi,Muhammad Waqar, Arsalan Ahmed Ijaz,Mujahid Badshah, Suhail Kazi

Design and fabrication of vertical axis ocean current turbine

12:30 12:50

Haris Mushtaq,Dr Muhammad Bilal Khan,Hafeez Rehman Khan

Economic Evaluation of Tarbela Dam

12:50 13:10

Saqlain Abbas,Zulkarnain Abbas,Riffat Asim Pasha, Zahid Suleman,Zubair Butt

Study and fabrication of Wave energy power plant using oscillating water column technique

Detailed Program

6

Session 3-A( Renewable Energy- Systems and Technologies) Venue: Hall -2

Session Chair: Prof. Dr. Adnan I.O. Zaid 11:30 11:50

Najam-Ul-Hassan Shah,Azhar Abbas Khan,Shahid Khalil, Muzafar Ali

Solar Energy Harnessing and Storage using Solar Pond

11:50 12:10

Zia Ahmad Khan, Samreen Siddique

Techno-Economic Analysis of wind energy generation For 50 MW Wind Farm in Jiwani, Balochistan using ARIMA models and RETScreen

12:10 12:30

Tariq Kamal, Syed Zulqadar Hassan, Laiq Khan, Sidra Mumtaz

Performance of Grid-Connected Hybrid Power System

12:30 12:50

Tariq Kamal, Syed Zulqadar Hassan, Laiq Khan,Sidra Mumtaz

PV based PHEVs/EVs smart charging station facility

12:50 13:10

Muhammad Rizwan Javed, Tahir Mahmood, Muhammad Ahmad Chaudary

Performance Analysis of Static Transfer Switch using MATLAB/Simulink

13:10 14:30 Prayer and Lunch Break

Plenary Session Venue: Quaid-e-Azam Auditorium

14:30 14:50

Ocean Renewable Energy: The New Frontier By Prof. Dr. Omer Bin Yaaqob

14:50 15:10

Data Mining Techniques to find the Sustainability Indicators for efficient Hydrocarbon/Energy Explorations:

By Prof. Dr. Muhammad Shahbaz

Session 1-B (Nuclear Power Generation System and Technology) Venue: Quaid-e-Azam Auditorium Session Chair: Mr. Tariq Sulejia

15:10 15:30

Azhar Hussain Malik, Muhammad Ilyas, Masroor Ahmad, Naseem Irfan,Riaz Hussain

Study of Gamma Irradiation Effects on Coaxial Cables

15:30 15:50

Kamran Arif,Azhar Hussain Malik Monte Carlo EGS5 Simulations of High Purity Germanium (HPGe) Detector

15:50 16:10

Kamran Qureshi Role of advanced nuclear reactor technologies in meeting the growing energy demands

Session 4-A ( Renewable Energy System- Aspects of material and Structures) Venue: Hall -1

Session Chair: Dr. M. Nasir Tamin 15:10 15:30

Muahammad Rafiq, Danish Khan, Muhammad Ali

Dielctric Properties of Transformer Oil based Silica Nanofluids

15:30 15:50

Asghar Ali, Mahmood Jamil, Amir Habib, Nisar Ahmad, Zuhair S.Khan

Graphene oxide and sulfated graphene oxide; candidates for hole extraction layer in bulk-heterojunction polymer solar cells

15:50 16:10

Ijaz Husnain,Warda Mushtaq, Asghar Ali, Zuhair S Khan

Low cost and non-toxic preparation of Cu2ZnSnS4 absorber material for thin film photovoltaics and ,studies of its structural and thermal properties

7

Session 3-B ( Renewable Energy- Systems and Technologies) Venue: Hall -2

Session Chair: Dr. Mirza Jahanzaib 15:10 15:30

Arsham Iqbal Economic Analysis of a Small Hybrid Power System

15:30 15:50

Asghar Faiz, Abdul Rehman Hybrid Renewable Energy Systems: Hybridization and advance Control

15:50 16:10

Asghar Faiz, Sardar Shazali Sikander

Modeling and analysis of repetitive control of a single-phase grid inverter

16:10 16:30 Tea Break

Session 7-A ( Mixed Topics) Venue: Quaid-e-Azam Auditorium

Session Chair: Dr. Muhammad Shahbaz

16:30 16:50

Ashfaq Ahmed, Muhammad Awais, Muhammad Naeem,Muhammad Iqbal,Alagan,Anpalagan

Efficient Multiple Lines Outage Detection in Smart Grid

16:50 17:10

Kanwar Ahmad Mustafa, Ameer Ahmed

Implementation and Performance Analysis of two MPPT Algorithms based on Push-Pull Converter

17:10 17:30

Usam aIjaz, M.Hassan Khan Niazi, M.Mobeen Younis, Shahroze Amer, Waqas Hassan

Simulation and Implementation of Solar Power Battery Charger using Perturb & Observe Algorithm

17:30 17:50

Raheel Muzzammel, Muhammad Ahsan, Waqas Ahmad

Non- Linear Analytic Approaches of Power Flow Analysis and Voltage Profile Improvement

17:50 18:10

Haider E Karar, Aziz Altaf Khuwaja, Abdul Sattar

Solar Power Remote Monitoring and Controlling Using Arduino, LabVIEW and Web browser

Session 4-B( Renewable Energy System- Aspects of material and Structures) Venue: Hall -1

Session Chair: Dr. M. Nasir Tamin 16:30 16:50

Muhammad Rafiq, Danish Khan,Muhammad Ali

Insulating Properties of Transformer Oil-Based Silica Nanofluids

16:50 17:10

Hafiz Muhammad Zahid Iqbal, Atif Ashraf

Power Economic Dispatch using Particle Swarm Optimization

17:10 17:30

Dr. Ghous Bux Narejo, Fawad Azeem,yasir Ammar

A Survey of Control Strategies for Implementation of Optimized and Reliable Operation of Renewable Energy Based Microgrids in Islanded Mode

17:30 17:50

Tila Muhammad,Adnan Umar, Muhammad Luqman,Muhammad Bilal, Muhammad Aaqib, Muhammad Faisal

Generation of Isolated DC Voltage Sources for Multilevel Inverters

17:50 18:10

Muhammad Aziz Ul Haq,Hifsa iram,Haris Javed

Smart solar AC generator without inverter

8

Session 3-C ( Renewable Energy- Systems and Technologies) Venue: Hall -2

Session Chair: Dr. Naeem Iqbal 16:30 16:50

Muhammad Khurum Abbas ,Qadeer-Ul-Hasan

Economic Power Generation for an Off-Grid Site in Pakistan

16:50 17:10

Shoaib Saleem,NaeemAbas, Aun Haider

Review of Solar Thermal Water Heater simulations using TRNSYS

17:10 17:30

Ghulam Fareed Laghari,Dr.Adnan Umar,Dr.Suheel Abdullah

Comparative Analysis of Multi-Input DC/DC Converter Topology for Hybrid Renewable Energy Systems

17:30 17:50

Miss Hina, Dr. Adnan Noor, Malik Abbas

Non-Inductive DC-DC Regulated Boost Converter as Battery Charger for Photovoltaic Installation

17:50 18:10

Muhammad Rafay Khan, Aleem Ahmed Khan

A simple and economical approach for Mini Hydro-Power Generation System

Day-2 Thursday, June 11, 2015

TIME Event details/Venue: Plenary Session / Quaid-e-Azam Auditorium

09:00 09:20

Smart Power Grid in the 21st Century By Prof. Dr. Zafar Iqbal

09:20 09:40

Renewable Energy: The Past, Present And Future Trends: State Of The Art By Dr.I.O.Zaid

09:40 10:00

Structural Materials for Power Generation Systems: Performance and Reliability By Dr. Nasir Tamin

Session 7-B ( Mixed Topics) Venue: Quaid-e-Azam Auditorium Session Chair: Dr. Qasim Zeeshan

SPEAKER NAME PAPER TITLE

10:00 10:20

Muhammad Shahzad Aziz, Sohaib Ahmad, umair Saleem, Hafeez-Ur Rehman, Majid Ali

Simulation, design and fabrication of an efficient single phase Transformer.

10:20 10:40

Sheeraz Ahmed,M.Faizan Electronic Ballast Circuit Configurations for Fluorescent Lamps

10:40 11:00

Zafar Ali Khan, Anzar Mahmood Jehanzaib Ali

Optimization based Individual and Cooperative DSM in Smart Grids: A review

Session 4-C ( Renewable Energy System- Aspects of material and Structures) Venue: Hall -1

Session Chair: Dr. M. Afzal Khan 10:00 10:20

M.Humayun Rashed Design and Implementation of prototype of Resonant DC to DC Converter for Telecom Applications

10:20 10:40

Himayat Ullah, Vadim ,ilberschmidt

Analysis of impact induced damage in composites for wind turbine blades

10:40 11:00

Hafiz M. Saleem,Kamal Mustafa,Zahid Nazir,M.Saifullah Awan,Zuhair Subhani Khan

Investigation of the effects of calcination temperature on structure of LaMgAll1O19 for thermal barrier coating applications

9

Session 3-D ( Renewable Energy- Systems and Technologies) Venue: Hall -2

Session Chair: Prof. Dr. Shahab Khushnood 10:00 10:20

Saquib Farooq Smart Grid Energizing towards a greener future

10:20 10:40

Syed Ahsan Ali, M.Bilal Zafar, Muhammad Farooq Nawaz, Umar Yasir Hayat, Faheem Ahmad Soomro

Modeling of wind power plant using MATLAB

10:40 11:00

Asad Khaliq,M.Ali Ikram, Muhammad Sulman

Quaid-e-Azam Solar Power (QASP) Park: Prospects and Challenges

11:00 11:30 Tea Break

Session 7-C ( Mixed Topics) Venue: Quaid-e-Azam Auditorium Session Chair: Dr. Tahir Nawaz

11:30 11:50

Tila Muhammad, Adnan Umar, Nouman Jamil

DC Voltage regulator for battery less PV system using MPPT

11:50 12:10

Qasim Ali,Waseem Siddique, Inamul Haq,Masroor Ahmad, Ijaz Ahmed,Waseem Sarwar

CFD analysis of flow blockage through coolant channel of PARR-I

12:10 12:30

Talha Wahab, Muhammad Abid, Abdul Qayyum Khan, Ghulam Mustafa

Robust Fault Detection of Linearized Power Grid Network System

12:30 12:50

Noman Nisar, Syed Hassaan Ahmed

Voltage Profile – A study related to Sustainability to the Customers

12:50 13:10

N.Beithou, S.Jaber Effects of Covered Cold water inlet on discrete hot water usage from domestic hot water storage tank

Session 5-A ( Energy System, Technology and Management) Venue: Hall -1

Session Chair: Prof. Dr. Muhammad Abid 11:30 11:50

Samreen Siddique, Rashid Wazir, Zia Ahmad Khan, Naseem Iqbal

Techno-economic study for 50 mw wind farm in Gwadar, Baluchistan

11:50 12:10

Qari Waheed, Shahid Maqsood , Rashid Nawaz, Anas Bin Aqeel

Investigation of thermal behavior and kinetic analysis of Pakistani rice husk, sugarcane bagasse and wheat straw using thermogravimetric analysis

12:10 12:30

Muhammad Rizwan Javed, Muhammad Zaheer Babar, Mohsan Islam

Study of scope and effects of Isolated small distributed generation sources and their Integration with existing system

12:30 12:50

Hafiz Muhammad Bilal Ahmed, Maki Malik,Akif Zia Khan

Economic Planning of Network for Integration of Renewable

12:50 13:10

Arsalan Hussain Zaidi, Dr Pukar Mahat

Optimal Electric Vehicle Load Management for Minimization of Losses

10

Session 3-E ( Renewable Energy- Systems and Technologies) Venue: Hall -2

Session Chair: Prof. Dr. Adnan I.O. Zaid 11:30 11:50

Noman Nisar, Muhammad Bilal Khan

Analysis and Optimization of 132KV Grid Using ETAP

11:50 12:10

Anis Ur Rehman, Muhammad Iftikhar Khan, Sheharyar Mehmmod,Bilal Khan

Comparison Based Distributed Generation Implementation Algorithm for the Performance Enhancement of Radial Distribution System

12:10 12:30

Ghulam Qadar Chaudhary Design Optimization and Experimental Investigation of Solar Assisted 1 Ton (3.516 KW) Vapor Absorption Air Conditioning System.

12:30 12:50

Bhagwan Das, Vicky Kumar Lohana

Power Optimization of Pseudo Noise Based Optical Transmitter Using LVCMOS IO Standard.

12:50 13:10

Fahad Lateef, Muhammad Usman Power Consumption Measurement & Configuration Time of FPGA

13:10 14:30 Prayer and Lunch Break

Session 6-A ( Fossil fuels Power Generation System and Technology) Venue: Quaid-e-Azam Auditorium

Session Chair: Prof. Dr. Muhammad Bilal Khan

14:30 14:50

Key note: Review of Geothermal Energy Development efforts in Pakistan and way forward

By Dr. Irfan Ahmed Gondal

14:50 15:10

Muhammad Ishfaq Khan, Dr.Liaquat Ali Najmi, Muhammad Tayyab, Raja Ishaq Ahmad, Habib Ur Rehman, Shahbaz Akhtar

Heat Estimation of Road Side Herbs: GT Road, Wah Cantt

15:10 15:30

Akhtar Saeed Prospects of Bagasse as a Feasible Bio-fuel for Electricity Generation in Pakistan – A Realistic Approach

15:30 15:50

Syed Atif, Rafiq Shah,Muhammad Mubassir saleem,Hafeez Rehman, Dr. Muhammad Bilal Khan

The cost for growth: A study on the energy demand of Pakistan using TIMES

15:50 16:10

Taimur Ali Khattak, Muhammad Shahid Khalil

Effect of increase in Utility Price on feasibility of a Power Generation Project

16:10 16:30

Rakesh Sinha, Arsalan Hussain Zaidi

Protection of Distribution Systems with Significant Penetration of Distributed Generation

16:30 16:50

Muddasar Habib Production of Biofuels from Micro ALGAE and green wastes through Anaerobic Digestion

11

Session 5-B ( Energy System, Technology and Management) Venue: Hall -1

Session Chair: Prof. Dr. Zafar Iqbal 14:30 14:50

Key note: Efficient Power Generation and Management By Dr. Tahir Nawaz

14:50 15:10

Waqas Khalid, Qurat-Ul-Ain Mehfooz, Imran Ali Shah, Dr. Waqar Mahmood

Reduction in Building Energy Requirements by Modren Energy Conservation Techniques

15:10 15:30

Imran Iqbal, Dr Irshad Ahmed Heating/Cooling Degree Days and Building Energy Consumption in Pakistan

15:30 15:50

Saima Jamil, Saqib Jamil,Sheeraz Ahmad

COPE: Cooperative Power and Energy-efficient Routing Protocol for Wireless Sensor Networks

15:50 16:10

Adnan Zaid, Zuhair El-Issa, Radwan Zaid Al-Kilani

Utilisation of geothermal energy in Jordan

16:10 16:30

Adnan Zaid, Radwan Zeidel-Kelani, Nabil Beithou

The status and prospectus of renewable energy in Palestine

16:30 16:50

Radwan Zeidel-Kelani, Adnan Zaid, Nabil Beithou

Geothermal energy in Palestine practical applications

16:50 17:10

Fida Khan, Ayesha Abbasi General Overview of Using High Voltage Direct Current (HVDC) Transmission in Pakistan for Maximum Efficiency and Performance

Session 4-D ( Renewable Energy System- Aspects of material and Structures)) Venue: Hall -2

Session Chair: Dr. Nawar Khan

14:30 14:50

Key note: Selection of solar system for domestic purpose in urban areas: from consumer perspective

By Dr. Mirza Jehanzaib 14:50 15:10

Key note: Energy – The Source Of Activation In Natural And Industrial Life By Dr. Nawar Khan

15:10 15:30

Asad Muneer, Dr.Mohammad Bilal Khan, Muhammad Ali Afzal, Muhammad Sohaib Badar, Zia Ahmad Khan

CFD analysis of a Savonius vertical axis wind turbine

15:30 15:50

Mahmood Jamil, Asghar Ali, Naseem Iqbal, Zuhair S. Khan

Synthesis and characterization of wide band gap nano-Nb2O5 based photoanode material for advanced generation dye sensitized solar cells (DSSCs)

15:50 16:10

Tehseen Ilahi, Muhammad Abid Design and analysis of thermoelectric material based roof top energy harvesting system for Pakistan

16:10 16:30

Danial Naeem, Gussan Mufti Performance analysis of Parabolic Trough Collectors in various climatic conditions of Pakistan using mathematical and computational models

16:30 16:50

Adnan Zaid, Ahmad Qandil Considerations in the Design and Manufacturing of a Load Cell for Measuring Dynamic Compressive Loads

16:50 17:10

Faizan Mustafa, Muhammad Faisal khan, Khasan Sangink Karimov

Effect of Compound Parabolic Concentrator on Photovoltaic module

17:10 18:30 Tea break/ Panel Discussion/Closing ceremony

12

Contact us: Secretary (PGSRET)

International Islamic University, Sector H-10, Islamabad, Pakistan.

Ph: +92 51 9019071 Fax: +92 51 9258025

Email: pgsret@iiu.edu.pk URL: http://iiu.edu.pk/pgsret2015/

2nd International Conference on power Generation Systems & Renewable Energy Technologies

(PGSRET-2015)