2014 v1 price catalog de-icing cover-p9 · 2020. 1. 22. · our regularly stated terms: equipment:...

WATER TREATMENT

HYDRONIC HEATINGand

HOT WATERSystems and Accessories

Systems and Accessories

. . . Since 1951 April 1, 2014

Our regularly stated terms:Equipment: 25% down at time of order; balance due one week prior to shippingParts and Supplies: Net 30 days with approved creditA service charge of 1-1/2% per month will be applied on all overdue accounts. Purchases are deemed made and payable at:Huron Valley Sales, Inc., 6032 Schooner Street, Belleville, MI 48111All accounts 25 days or more overdue will be placed on COD.Credit deductions from any invoice are not permitted without prior permission

Taxes and Fees

Acceptance of Orders

Returned MaterialNo material may be returned without prior written authorization.New and Unused: Unless otherwise stated, acceptance is subject to inspection and restocking charge.Damaged & Defective: All warranty claims are subject to manufacturer's approval and claims procedure.

Hours: 7:30 am - 5:30 pm EST Monday - Friday

Pricing Notation: Prices are effective on the date shown and supercede all previous listings. Prior sales are excluded. Quotations and orders preceding the effective date will be protected for thirty (30) days after the effective date. All pricing is subject to change without notification. We reserve the right to correct any errors.

Phone: 734-944-5200 / 800-977-1534Fax: 734-944-5800

Voice Mail: 734-944-0028

24 Hour 7 Day Emergency Answering Service

Unless otherwise noted, prices are subject to the addition of any tax imposed by any present or future Federal,State, County or Municipal law on the sales of such material. The customer is responsible for all such taxes. Customers outside the US are responsible for any taxes, customs, brokerage or other fees imposed as a result of shipments outside the United States.

Huron Valley Sales, Inc., 6032 Schooner Street, Belleville, MI 48111

E-mail: [email protected]

Contact Us

Huron Valley Sales, Inc.Vehicle Wash Price Catalog

These price sheets do not constitute an offer to sell. All orders are subject to final approval on the terms and conditions contained in our standard customer acknowledgement form.

Effective April 1, 2014

Terms and Conditions

. . . Since 1951

Useful Engineering Data 1 2Useful Engineering Data 2 3Outdoor Design Temperature Data 4Atmospheric Heating and Hot Water Supply Boilers 5Tank (Storage) Type Water Heaters 6Hot Water Storage Tanks and Thermal Expansion Tanks 7

Underfloor Materials by Square Feet 10Parts and Installation Accessories 11TM High Efficiency Boiler Systems - Sealed Combustion 12Boiler Selection Guide & Multi-Zone Options - High Efficiency 13RAYPAK High Efficiency Boiler Systems - Sealed Combustion 14Boiler Selection Guide & Multi-Zone Options - High Efficiency 1582% Efficiency Atmospheric Boiler Systems & Selection Guide 16Fan Assisted Boiler Systems & Selection Guide 18Make-Up Air, Draft Inducers, Vent Kits 20Aldrich Oil Fired De-icing Boiler Packages 21Infra-Red Radiant Heaters and Door Jet Heaters 22Rail / Duct / Weep Heating Systems 23

Hot Water Supply Sizing Guide - Tunnels 26Hot Water Supply Sizing Guide - Self Service 27TM High Efficiency Sealed Combustion Boiler Systems & Sizing Guide 28RAYPAK High Efficiency Sealed Combustion Boiler Systems & Sizing Guide 3082% Efficiency Atmospheric Boiler Systems & Sizing Guide 32Make-Up Air, Draft Inducers, Vent Kits 34Storage Tanks and Expansion Tanks 35RUUD / RHEEM Commercial Tank Type Gas Heaters 36RUUD / RHEEM Commercial Tank Type Electric Heaters 38ALDRICH Oil Fired Combination Boilers 39ALDRICH Oil Fired Boilers 40

Water Pressure Boosters - Variable Frequency Drives 42Water Pressure Boosters - Constant Speed 43

Self Service Softener Selection Guide 46In Bay Automatic Only Softener Selection Guide 47Self Service with In Bay Automatic 25 GPM Softener Selection Guide 48Self Service with In Bay Automatic 35 GPM Softener Selection Guide 4991F 1" Series - Single and Twin Systems 5095F 1-½" Series - Twin Systems 51FC 2" Series - Single, Twin and Triple Systems 52

Spot Free Rinse Sizing Guide 54Spot Free Rinse Production Systems 55Repressurization Delivery Systems 56Storage Tanks - Polyethylene - Above and Below Ground 58Parts and Accessories 59Self Service Systems 60Self Service and 1 High Pressure Automatic 61Self Service and 2 High Pressure Automatics 62High Pressure Auto Bays and Roll-Over Bays Only 63Conveyor Systems 64

Aqua Limited - Water Reclaim 66Aqua Bio Complete - Biological Water Treatment 67

PROPAK WATER TREATMENT SYSTEMS

Table of Contents

PROPAK WATER SOFTENERS

PROPAK SPOT FREE RINSE

PROPAK HOT WATER SUPPLY

ENGINEERING DATA AND CODE REQUIREMENTS

PROPAK ICE PREVENTION

WATER PRESSURE BOOSTING SYSTEMS

HURON VALLEY SALES, INC.Phone (734) 944-5200 Fax (734) 944-5800 Effective: April 1, 2014

BTU CONTENT OF FUELS One gallon of fresh water = 8.333 lbs. COAL BTU'S One cubic foot of water = 7.48 gallons 1 Lb. 10,000-15,000 One cubic foot of water (at 39.2° F. maximum density) = 62.428 lbs. 1 Ton 25 Million (approx.) One cubic foot of water (at 212° F. boiling point) = 59.83 lbs. ELECTRICITY One U.S. Gallon = 231 cubic inches 1 KW 3,412 The capacity of a cylinder in gallons is equal to the length in inches GAS multiplied by the square of the diameter in inches x .0034. 1 Lb. of Butane 21,300 A water column one foot high exerts .4333 psi pressure. 1 Gallon of Butane 102,600 Doubling the diameter of a pipe increases its capacity four times. 1 Cu.Ft. of Butane 3,260

1 Cu.Ft. of Manufactured 530 above 7.0 alkaline 1 Cu.Ft. of Mixed 850

pH 7.0 neutral 1 Cu.Ft. of Natural 1,075 below 7.0 acid 1 Lb. of Propane 21,600

1 Gallon of Propane 91,000 1 Grain per gallon = 17.1 parts per million. 1 Cu.Ft. of Propane 2,570 Water expands 4.34% heated from 40° to 212°. OIL

1 Gallon of #1 Fuel 136,000 1 Gallon of #2 Fuel 138,500 1 Gallon of #3 Fuel 141,000 1 Gallon of #5 Fuel 148,000

Amps (3 Phase) KW x 1,000 1 KW Hour will evaporate 3.5 lbs. 1 Gallon of #6 Fuel 152,000 Volts x 1.732 of water from and at 212° F. 1 Boiler H.P. = 33,475 BTUH Output

1 Lb. of Gas = 28" Water ColumnAmps (1 Phase) KW x 1,000 1 KW Hour = 3,412 BTU 1 Lb. of Gas = 16 Oz. * 100 Cu.Ft. = 1 Therm

Volts 1 BPH = 34.5 lbs. of steam at 212°

GPH = KW x 3,412 1 BPH = 33,475 BTU Multiply By To Obtain8.33 x Temp. Rise 1 BPH = 9.8 KW Fahrenheit (F.) 5/9 (after subtracting 32) Celsius (Cel.)

Celsius (Cel.) 9/5 (then add 32) Fahrenheit (F.) Ounces (oz.) 28 Gram (gm.) Gram (gm.) .035 Ounces (oz.) Pound (lb.) 0.45 Kilogram (kgm.)

Formula for recovery in gallons per hour for any degree F. rise. Kilogram (kgm.) 2.2 Pound (lb.) Gallon (ga.l) 3.8 Liter (L.)

Rated Recovery in Gallons/Hour x 100 Liter (L.) 0.26 Gallon (ga.)Desired Degree F. Rise Inch (in.) 2.5 Centimeter (cm.)

Centimeter (cm.) 0.4 Inch (in.)

Length * Tank Diameter – Inchesin Feet 20 22 24 30 36 42 48 54 60 66 72 78 84 90 96

1 16 20 24 37 53 72 94 120 145 180 210 250 290 330 375 3" thick 1 Yard 87 sq. ft.2 32 40 48 74 106 144 188 240 290 360 420 500 580 660 750 4" thick 1 Yard 76 sq. ft.3 48 60 72 110 159 216 282 360 435 540 630 750 870 990 1125 5" thick 1 Yard 65 sq. ft.4 66 80 96 147 212 288 376 480 580 720 840 1000 1160 1320 1500 6" thick 1 Yard 54 sq. ft.5 82 100 120 184 265 360 470 600 725 900 1050 1250 1450 1650 18756 98 120 144 220 317 432 564 720 870 1080 1260 1500 1740 1980 22507 114 140 168 257 370 504 658 840 1015 1260 1470 1750 2030 2310 26258 131 160 192 294 423 576 752 960 1160 1440 1680 2000 2320 2640 30009 147 180 216 330 476 648 846 1080 1305 1620 1890 2250 2610 2970 337510 163 200 240 367 529 720 940 1200 1450 1800 2100 2500 2900 3300 375011 180 220 264 404 582 792 1034 1320 1595 1980 2310 2750 3190 3630 412512 196 240 288 440 634 864 1128 1440 1740 2160 2520 3000 3480 3960 450013 212 260 312 477 687 936 1222 1560 1885 2340 2730 3250 3770 4290 487514 228 280 336 514 740 1008 1316 1680 2080 2520 2940 3500 4060 4620 525015 244 300 360 550 793 1080 1410 1800 2175 2700 3150 3750 4350 4950 562516 260 320 384 587 816 1152 1504 1920 2320 2880 3360 4000 4610 5280 6000

Useful Engineering Data 1WATER

Gas - Electric - Oil - Coal

ELECTRICITY

METRIC CONVERSIONS

RECOVERY FORMULA

STORAGE TANK CAPACITY IN GALLONS AREACONCRETE WILL COVER

1 Acre = 43,560 sq. ft.

* To determine diameter when only the circumference is known, divide that figure by 3.1416 ( )

= Gallons/Hour

2


Nozzle CapacityOrifice GPM (gallons per minute) at P.S.I. (pounds per square inch) based on water

Capacity 40 100 200 300 400 500 600 700 800 1000Size* p.s.i. p.s.i. p.s.i. p.s.i. p.s.i. p.s.i. p.s.i. p.s.i. p.s.i. p.s.i.

–04 .40 .63 .89 1.1 1.3 1.4 1.6 1.7 1.8 2.0–05 .50 .79 1.1 1.4 1.6 1.8 1.9 2.1 2.2 2.5–055 .55 .87 1.2 1.5 1.7 1.9 2.1 2.3 2.5 2.8–06 .60 .95 1.3 1.6 1.9 2.1 2.3 2.5 2.7 3.0–065 .65 1.03 1.5 1.8 2.1 2.3 2.5 2.7 2.9 3.3–07 .70 1.1 1.6 1.9 2.2 2.5 2.8 2.9 3.1 3.5–08 .80 1.2 1.8 2.2 2.5 2.8 3.1 3.4 3.6 4.0–09 .90 1.4 2.0 2.5 2.9 3.2 3.5 3.8 4.0 4.5–10 1.0 1.6 2.2 2.7 3.2 3.5 3.9 4.2 4.5 5.0–15 1.5 2.4 3.4 4.1 4.7 5.3 5.8 6.3 6.7 7.5–20 2.0 3.2 4.5 5.5 6.3 7.1 7.7 8.4 8.9 10.0–30 3.0 4.7 6.7 8.2 9.5 10.6 11.6 12.5 13.4 15.0–40 4.0 6.3 9.0 11.0 12.6 14.1 15.5 16.7 17.9 20.0–50 5.0 7.9 11.2 13.7 15.8 17.7 19.4 21.0 22.0 25.0–60 6.0 9.5 13.4 16.4 19.0 21.0 23.0 25.0 27.0 30.0–70 7.0 11.1 15.7 19.2 22.2 25.0 28.0 29.0 31.0 35.0

3/8" ID = .573 3/4" ID = 2.3 1¼" ID = 6.38 2" ID = 16.23 3" ID = 36.71/2" ID = 1.02 1" ID = 4.08 1½" ID = 10.2 2½" ID = 25.3 4" ID = 65.5

¾" 1" 1¼" 1½" 2" 2½" 3" 4"

9.1 18.7 33.5 51.6 106 200 290 58914 28 52 78 160 308 436 88516 33 60 90 184 350 504 1023

17.5 37 70 101 206 390 564 114319.5 40 76 110 226 430 617 125222 45 85 123 253 480 690 140025 52 99 142 292 558 797 1607

COPPER PIPE & TUBINGWhen measuring copper pipe, sweat fittings are measured by their inside diameter (ID) , and compression fittings are measured by their outside diameter (OD). Hard temper comes in 20 foot straight lengths, and soft temper comes in 60 foot coils. Copper tubing is normally designed to conform with ASTM Designation B88. See the code specific information on each type. Use 50/50 solid core (NOT ROSIN CORE), and a high quality flux when soldering sweat fittings.

TYPES OF COPPER PIPEDWV: "DWV stands for :Drain, Waste and Vent" and is recommended for above ground use only, and no pressure applications. Sweat fittings only. Available only in hard type and in sizes from 1¼" to 6".

Useful Engineering Data 2Stainless Steel VeeJet ® Spray Nozzles

GALLONS OF WATER IN 100 FEET OF COPPER TUBING

2.31 ft. of pressure drop = 1 lb. or 1 psi.

K: A thick walled, flexible copper tubing. Much thicker wall than type L and M, and is required for all underground installations. Typical uses include water services, plumbing, heating, steam, gas, oil, oxygen, and other applications where thick walled tubing is required. Can be used with sweat, flared, and compression fittings. Available in hard and soft types.

L: Standard tubing used for interior, above ground plumbing. Uses included heating, air conditioning, steam, gas, oil, and for underground drainage lines. This is flexible tubing but be very careful not to crimp the line when bending it. Special tools (inexpensive) are readily available to make bending much easier and safer. Although sweat, compression, and flare fittings are available, only compression fittings are legal for gas lines. Available in hard and soft types.

M: Typically used with interior heating and pressure line applications. Wall thickness is slightly less than types K and L. Normally used with sweat fittings. Available in hard and soft types.

CAPACITIES OF WATER PIPING PER 100 FT. LENGTH (IN U.S. G.P.M.)Nominal PipeSize Pressure

17 lbs.30 lbs.40 lbs.50 lbs.60 lbs.75 lbs.100 lbs.

3


+10° F. -30° to -20° F. Montana-50° to +10° F. -20° to -10° F. Nebraska+10° to +36° F. -15° to -5° F. Nevada Alberta

+10° F. -10° F. New Hampshire British Columbia0° F. New Jersey Manitoba

-20° to -10° F. -10° to 0° F. New Mexico New Brunswick0° F. -20° to 0° F. New York Newfoundland0° F. +10° F. North Carolina Northwest Territory

+10° F. -30° F. North Dakota Nova Scotia+25° F. -10° to 0° F. Ohio Ontario+10° F. -10° to 0° F. Oklahoma Prince Edward+50° F. -5° to +10° F. Oregon Quebec-10° F. 0° F. Pennsylvania Saskatchewan-10° F. 0° F. Rhode Island Yukon Territory-10° F. +10° F. South Carolina-20° F. -20° F. South Dakota-10° F. 0° F. Tennessee

0° F. -10° to +20° F. Texas+20° F. -10° F. Utah-10° F. -10° F. Vermont

0° F. +10° to + 15° F. Virginia0° F. -15° to + 15° F. Washington

-10° F. -10° F. West Virginia-20° F. -25° to -15° F. Wisconsin+10° F. -15° F. Wyoming-10° F.

-40° F.-40° F.-40° F.-4° F.-4° F.

-58° F. -20° C. -50° C.

+14° F.-13° F.

+14° F.-27° F.

-40° C. -40° C.

-10° C. -25° C.

-40° C. -20° C.

-10° C. -33° C.

AlabamaCanada

Outdoor Design Temperature DataOutdoor Design Temperatures By State and ° F. Range Within State

AlaskaArizonaArkansasCaliforniaColoradoConnecticutWashington D.C.DelawareFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMarylandMassachusettsMichiganMinnesotaMississippiMissouri

-40° F.-49° F.

-40° C. -45° C.

4


State CodeBoiler Boiler Boiler Boiler Boiler Boiler Boiler

California CALIF

Kentucky KY

Minnesota MINN

New York NY

Texas CSD-1

Utah CSD-1

Boiler Boiler Boiler Boiler Boiler Boiler Boiler182 - 400 514 - 724 824 - 962 1125 - 1468 1631 - 1826 2100 - 2500 3001 - 4001

California CALIF $ 478

Kentucky KY $ 326 $ 326 $ 326 $ 326 $ 326 $ 326 $ 326

Minnesota MINN $ 148 $ 1,708 $ 1,708 $ 4,188 $ 4,188 $ 4,555 $ 3,098

New York NY $ 65 $ 65 $ 65 $ 65 $ 65 $ 65 $ 65

Texas CSD-1 $ 478

Utah CSD-1 $ 65 $ 65 $ 65 $ 65 $ 65 $ 65 $ 65

NOTES:

SPECIAL BOILER CODE REQUIREMENTS

Ice Prevention & Hot Water SupplyHigh Efficiency

Codes change frequently.Please consult with your salesperson for current code requirements and pricing.

All Propak Boilers meet CSD-1 safety requirement. States listed below have additional requirements.

Code Requirements as of January 1, 2014. Some special state and local codes may require additional controls. Unless otherwise advised, we will include the state codes on the boiler. If state codes are not needed, please state so on order.

Refer to Low Nox Boilers (page 29) or call for pricing

Refer to Low Nox Boilers (Section 3100) or call for pricing

AtmosphericIce Prevention & Hot Water Supply

All Propak Boilers meet CSD-1 safety requirement. States listed below have additional requirements.

State Code

5


STATE STATEAlabama No Montana NoAlaska Yes Nebraska YesArizona Yes Nevada YesArkansas Yes New Hampshire YesCalifornia Yes ‡ New Jersey YesColorado Yes New Mexico YesConnecticut No New York YesD.C. Yes North Dakota NoDelaware Yes North Carolina YesFlorida Yes † Ohio YesGeorgia Yes Oklahoma YesHawaii Yes Oregon YesIdaho Yes Pennsylvania YesIllinois Yes ‡ Rhode Island YesIndiana Yes South Carolina NoIowa Yes South Dakota NoKansas No Tennessee YesKentucky Yes Texas YesLouisiana Yes * Utah YesMaine Yes Vermont YesMaryland Yes Virginia YesMassachusetts Yes Washington YesMichigan Yes West Virginia YesMinnesota Yes Wisconsin YesMississippi Yes Wyoming NoMissouri Yes

NOTES: ASME TANK APPROVAL is "NOT" required on water heaters with: (A) Inputs under 200,000 BTUH and, (B) Tank capacities of less than 120 gallons.

* Only enforced in New Orleans and on State Bids.† Applies to units over 400,000 BTUH.‡ Energy Miser required.

ASME TANK CODE REQUIREMENTSFOR

TANK / STORAGE TYPE WATER HEATERS

ASMEASME

6


HOT WATER STORAGE TANKS EXPANSION TANKSArizona Arizona

Arkansas

Colorado Colorado

Idaho

Illinois (local requirement)

Iowa (local requirement)

Kansas (local requirement)

Kentucky Kentucky

Massachusetts Massachusetts

Michigan Michigan

Missouri Missouri

Nebraska

New Jersey

New Mexico New Mexico

North Carolina North Carolina

Ohio (local requirement) Local Requirement

Oregon

Pennsylvania Pennsylvania

Rhode Island

Utah Utah

Virginia

Washington State Washington State

West Virginia

Wisconsin Wisconsin

NOTE:Code requirements effective as of January 1, 2014. However, code requirements change throughout the course of the year. Please checkwith local jurisdictions for current requirements or call us for assistance.

ASME CODE REQUIREMENTS

HOT WATER STORAGE & EXPANSION TANKSFOR

7

THIS PAGE AVAILABLE FOR NOTES

HURON VALLEY SALES, INC.

Phone (734) 944-5200 Fax (734) 944-5800 Effective: April 1, 2014

$4.15 $4.35 $4.60

$2.55 $ 2.70 $ 2.90

$2.45 $ 2.60 $ 2.80

$2.35 $ 2.47 $ 2.67

$2.27 $ 2.36 $ 2.56

$2.04 $ 2.12 $ 2.32

Up to 2 Set Clamps / Brackets - Up to 2 boxes / covers






1.

2. Size boiler from sizing charts and add to package for list price. (see pages 13,15, or 17)3. Boiler package includes proper pump for the system (size based on PROPAK ® drawing).

Example:

6 Bays @ -0° Design 3,100 sq.ft. @ $2.27

16' x 24' with 3' entrance and exit ramps TD5-940B Boiler Package

12' equipment room Total Package List Price

$616 $821 $1,250

$1,058 $1,848 $2,464 $3,749

$22 $57 $83 $99

$27 $64 $96 $117B-125T-C

1-1/2"

B-150T-C

B-150T-150MA

PPXO150B1

PPXO200B3

B-200T-150MA

PPXO125B3

B-125T-150MA

Coupling

PPXO100B1

PPXO100B3

B-100T-150MA

B-100T-C

Tubing - 100 FT

Male Adaptor

PPXO200B1

ITEM / SIZE 1" 1-1/4" 2"

$353

851 - 1,650 Square Feet Area

1,651 - 2,650 Square Feet Area


4,251 + Square Feet Area

GROSS AREA TO BE HEATEDIncluding Pits, Walls, Ramps, etc.

451 - 850 Square Feet Area


NOTE: The above prices are based on tubing installed 12" on center. Snow melt applications are typically 6" or 9" on center which requires an upcharge as shown here >>>>

1.70For 9" O.C. multiply price byFor 6" O.C.

multiply price by 1.90



851 - 1,650 Square Feet Area



4,251 + Square Feet Area

Notes:

$ 15,538

Underfloor Package includes : Engineered layout, PROPAK ® polythermal tubing with tubing cutter, pre-assembled supply and return manifolds, wire ties with ratchet tool, test mains with air charging valve and pressure gauge, slabstat, boxes and covers or wall mount brackets as required.

$ 7,037

$ 8,501

B-200T-C

PPXO150B3

Per Square Foot

240' Average Run Length

Pricing includes the number of boxes and covers or wall mount clamps as indicated in the table below. Additional boxes and covers or wall mount clamps may be added to achieve special design configurations. See page 11 for component pricing.

Design Area in Square Feet Standard Allowed Wall Mount or Boxes and Covers

UNDERFLOOR SYSTEM - MAIN SUPPLY LINE TUBING AND FITTINGS

Tubing - 300 FT

PPXO125B1

Per Square Foot


Per Square Foot


List Price List Price

LIST PRICE SHEET

1/2" ID - 5/8" OD 5/8" ID - 3/4" OD 3/4" ID - 7/8" OD

List Price

ICE PREVENTION - SNOW MELTFLOOR HEAT - DE-ICING

INFLOOR MATERIALS ONLY

TUBING SIZE

10


$ 134 1/2" Coupling (5/8" OD) $ 16

$ 191 5/8" Coupling (3/4" OD) $ 40

$ 161 3/4" Coupling (7/8" OD) $ 56

$ 253 $ 410

$ 57 $ 181

$ 166 $ 145

$ 1,107 $ 410

$ 249 $ 329

$ 57 $ 85

$ 850

$ 1,511

$ 1,511

Underfloor Insulation

$ 212

$ 108 $ 138 $ 202

$ 215 $ 276 $ 405

$ 269 $ 346 $ 506

$ 323 $ 415 $ 607

$ 431 $ 553 $ 809

$ 538 $ 691 $ 1,012

$ 141 $ 144 $ 144

$ 185 $ 192 $ 192

$ 236 $ 245 $ 245

$ 287 $ 299 $ 299

$ 334 $ 350 $ 350

$ 384 $ 403 $ 403

$ 432 $ 454 $ 454

$ 476 $ 501 $ 501

$ 527 $ 555 $ 555

$ 580 $ 612 $ 612

$ 645 $ 680 $ 680

$ 681 $ 719 $ 719

FOR USE WITH

1,000' Roll Tubing

PPRM-WMK

ICE PREVENTION - SNOW MELTING - FLOOR HEAT - DE-ICINGPARTS and INSTALLATION ACCESSORIES

B-1010-6

List PriceManifold Box - Small 19 x 22 (1-6 Runs)

PPX05CB8800' Roll Tubing

Multi-Zone Expansion Tank, 1-1/2" connections, powder coated steel, sight glass, air charging valve999-30000-K

999-30002-K

Part No. Description

006684

TE-070

008857

T-675A 1011

0088571

Wall Mount Clamp (4 pc. Set)

Air Stat

600170 Slabstat (T675A 1029)

Manifold Wall Mounting Kit

200' Roll Tubing PPX05CB2

PPX05CB4

TO CALCULATE REQUIRED MATERIALSq. Ft. of area to be heated x 1.10 ÷ 150 = # of Rolls

Part No.Part No.Description

5/8" OD - 1/2" ID

DRFB-6

List Price

5/8" Ball Valves3/4" OD Compression End

PPX07CB2

List Price

3/4" OD - 5/8" ID TUBING

PPX06CB5

FOR USE WITH

PPX07CB6

List Price

1/2" Ball Valves5/8" OD Compression End

MANIFOLDS - EXTRUDED AND ANODIZED ALUMINUM MANIFOLDS (1½" FPT) - Price per piece, order in multiples of 2

7/8" OD - 3/4" ID TUBING3/4" Ball Valves

7/8" OD Compression End

5/8" OD - 1/2" ID TUBING

Part No. Part No.

Description

List Price

PPRM-09-3/4

PPRM-07-3/4

7/8" OD - 3/4" IDList Price

PPX07CB10

Part No.

PPX06CB8

PPX06CB4 PPX07CB4

PPX07CB8

PPRM-03-5/8

PPRM-04-5/8

PPRM-11-3/4

PPRM-12-3/4

PPRM-07-5/8

PPRM-08-5/8

PPRM-09-5/8

PPRM-10-5/8

PPRM-08-3/4

PPRM-10-3/4

PPRM-04

PPRM-11 PPRM-11-5/8

PPRM-05-5/8

PPRM-10

PPRM-12-5/8PPRM-12

PPRM-01

PPRM-02

PPRM-08

PPRM-09

PPRM-06

PPRM-07

PPRM-03

PPRM-01-5/8

8 Run Manifold

6 Run Manifold

12 Run Manifold

11 Run Manifold

10 Run Manifold

9 Run Manifold

7 Run Manifold

2 Run Manifold

5 Run Manifold

PPX06CB2

4 Run Manifold

3 Run Manifold

500' Roll Tubing PPX05CB5

1 Run Manifold

PPRM-05

PPRM-02-5/8

PPRM-01-3/4

PPX07CB5

PPRM-06-3/4PPRM-06-5/8

PPRM-03-3/4

PPX06CB10

FOR USE WITH

PPRM-02-3/4

PPRM-04-3/4

PPRM-05-3/4

List PricePart No. Description

Installation Parts Package008858

0088581

B-1210-6

B-1410-6

1P0100

Manifold Box Cover - Small

PPAM-CLAMP

Manifold Box - Large 19 x 36 (7-12 Runs)

Manifold Box Cover - Large

Expansion TanksAir Sensor

Slab Sensor w/ 40 ft. cable

T201-FP

Air-X Tank, Single Zone, with sight glass, air charging valve

INSUL-TARP® Roll Insulation / Vapor Barrier1/2" X 6 FT. X 25 FT.

Multi-Zone Expansion Tank, 2" connections, powder coated steel, sight glass and air charging valve

PPX05CB10

PROPAK ® POLYTHERMAL TUBING - OXYGEN BARRIER TUBING WITH FOOTAGE INDICATORS, BOXED

400' Roll Tubing

3/4" OD - 5/8" ID

PPX06CB6600' Roll Tubing PPX05CB6

Part No. List Price

Digital Wall Thermostat

TE-090 Snow melt sensor w/ 65 ft cable

TE-091 Socket - snow melt sensor

TE-152

TE-073K

Digital Control

11



$ 6,853 $ 11,454 $ 879 $2,933 $192 N/A $467 $ 15,925

$ 6,901 $ 11,503 $ 879 $2,933 $192 N/A $467 $ 15,973

$ 7,561 $ 12,162 $ 879 $3,200 $192 N/A $467 $ 16,900

$ 8,301 $ 12,903 $ 879 $3,200 $192 N/A $467 $ 17,640

$ 11,650 $ 16,260 $ 879 $3,333 $192 N/A $467 $ 21,131

$ 14,586 $ 19,383 $ 879 $3,667 $192 N/A $467 $ 24,587

$ 21,824 $ 26,622 $ 879 $4,067 $192 N/A $467 $ 32,226

$ 28,904 $34,349 $ 1,281 $6,400 $192 $1,067 $745 $44,034

$ 36,142 $41,587 $ 1,281 $7,133 $192 $1,067 $745 $52,006

$ 43,381 $48,826 $ 1,281 $7,133 $192 $1,067 $745 $59,245

$ 57,698 $63,651 $ 3,703 $10,733 $287 $1,267 $998 $80,640

$ 64,937 $70,890 $ 3,703 $12,200 $287 $1,267 $998 $89,345

$ 86,493 $92,954 $ 3,703 $13,419 $383 $1,611 $1,328 $113,399

$1,232 $1,848 $1,848 Call for Quote

-$1,046Optional Mechanical Boiler Control - Deduct from system priceNote: Maximum efficiency results from utilizing sophisticated electronic controls. Therefore we do not recommend use of mechanical type controls but offer them as an economical alternative to the Therm-mizer digital control.

** BASIC PACKAGE

Inlcudes boiler(s), primary pump(s), properly sizd single zone pump, single zone digital pump control, Air-X Tank, and system installation kit.

THERMIZER ENERGY MANAGEMENT CONTROL

Included in all basic and complete system packages. Digitally monitors ice prevention system temperatures, enables zone pump(s) and boiler operation, initiates warm weather shuit down, and displays system status. (Pre-wired on complete systems).

FOB BELLEVILLE, MI

OTHER

REFER TO PAGE 13 FOR MULTI-ZONE SYSTEM UPGRADES

CONDENSATE MANIFOLD

GAS LINE MANIFOLD

ELECTRIC DISCONNECT PANEL

2 YEAR LIMITED ON PARTS15 YEAR PRORATED WARRANTY ON HEAT EXCHANGER

WARRANTY

Electric service breaker panel, pre-wired and rack mounted.

SHIPPING INFORMATION

*** COMPLETE SYSTEM

Includes the basic package items and adds pre-plumbed manifold (standard design), condensate manifold, gas supply manifold (where applicable), electrical service panel, and wall mount or free standing rack (depending on application). All pumps and controls are pre-wired. (Custom designed pre-plumbed manifolds are available. Call for quote.)

QUADTRIPLEDOUBLE

WALL MOUNTING RACKCustom fabricated for mounting TM boilers on the wall. Made of durable, 3/16" powder coated steel. Provides correct pitch for condensate drain. Legs available for free standing installations. Custom racks & stands also available.

PRE-PLUMBED MANIFOLD

CONDENSATE MANIFOLD

GAS LINE MANIFOLD

ELECTRIC DISCONNECT

PANEL

80,000

136,300

180,000

199,000

HWA 079

HWA 129

HWA 179

HWA 199

TM SINGLE UNIT BOILER

MODEL NUMBER BTU INPUT

ULTRA HIGH EFFICIENCY BOILERSICE PREVENTION / SNOW MELT / FLOOR HEAT / DE-ICING

BOILERONLY

*

BASICPACKAGE

**

COMPLETE SYSTEM

***

OPTIONAL EQUIPMENT (INCLUDED IN COMPLETE SYSTEM PRICE)

WALL MOUNTING

RACK

299,000HWA 299

HWA 599

HWA 399

HWA 798

Includes boiler(s) and primary pump(s) as required.

399,999

630,000

TM MULTI UNIT CONFIGURATIONS (OTHER CONFIGURATIONS AVAILABLE)

799,000

HWA 998 1,029,900

HWA1198 1,260,000

HWA 1597 1,659,000

HWA 1797 1,890,000

Free Standing Rack Upgrade Option (Add to wall mounting rack price)

SINGLE

HWA 2396 2,520,000

* BOILER ONLY

OPTIONAL EQUIPMENT DESCRIPTIONS

Fabricated with Type K copper, pressure tested to 100 psi for leak free installation and specifically engineered to maximize system flow and efficiency.

To neutralize condensate water prior to flowing to drain.


Properly sized for gas flow and pressure, leak tested to 100 psi, desgined for convenient, troble free installation.

12


$3,102 $5,527 $8,304 $10,815

$3,289 $5,900 $8,864 $11,562

$2,369 $4,060 $6,104 $7,882

$2,041 $2,585 $3,272

MULTI-ZONE - 079 TO 299

20,490

SNOW MELTING CONTROL UPGRADEADD TO SINGLE OR MULTI-ZONE SYSTEMS

DIGITAL CONTROL, WATER TIGHT ENCLOSURE, SNOW DETECTOR SENSOR (with 65 ft cable) & SOCKET

Zone piping added to single zone manifold Therm-mizer digital mutli-zone pump controlProperly sized zone pump(s) as required Low loss Air-X tank upgrade.

Multi-zone Therm-mizer Digital Control, Zone Pump(s) and Air-X Tank upgrade without pre-plumbed manifold

MULTI-ZONE - 399 TO 599

MULTI-ZONE OPTIONS(Add to package price on page 12)

HWA-1797 *

* Cascade System = 2 or more units combined Additional Multi-unit configurations available. Call for quote.

Upgrade a single zone zyztem to a multi-zone, digital controller system (or multi-zone with snow melting). Package price includes the following:

MODEL / SIZE

(4) 599'sHWA-2396 * 23,640

11,900

13,5602,304,900

13,490

15,37017,730

15,56018,3902,023,200(1) 399 + (2) 599

(3) 599's

2,520,000 27,9403,073,200

1,890,000 20,950

1,256,000

HWA-1597 * 1,659,000

299,000

399,999

630,000

N/A

18,080

N/A

N/A

3,250

5,120

(1) 399 + (1) 599

799,000

1,029,900

(2) 399's

HWA-998 *

BOILER SELECTION GUIDEICE PREVENTION - ULTRA HIGH EFFICIENCY

HighEfficiency

Approximate AtmosphericEquivalent

@10° F

(110 BTU / SQ FT)

@0° F

(130 BTU / SQ FT)

@-10° F

(150 BTU / SQ FT)

@- 20° F

(170 BTU / SQ FT)

Boiler Model

750

N/A

N/A

199,000

166,200

219,500

242,700N/A

136,300 1,510

2,870

Multi-unit (cascaded) systems

HWA-798 *

4,430

6,980

487,800

768,300

980

1,290

1,430

2,140

4,520

180,000

1,110

1,460

1,620

2,000

2,210

364,600 3,310 2,430

PROPAK AND RAYPAK MODELS

SNOW MELT OPTIONS (ALL SIZES) STAND ALONE SNOW MELTWith up to 2 Zones

Ice PreventionWith 3 to 5 Zones

Ice Prevention

Upgrade to:

2 Zones 3 Zones 4 Zones 5 Zones

13,970 10,240

6,500

8,37011,420

5,730

HWA-129

HWA-179

HWA-199

HWA-299

HWA-399

HWA-599

650N/AHWA-79

Capacity (Square Feet)BTU InputCascade System

Combination*

57097,600 89080,000

3,750

5,910

7,500

1,280

1,690

1,870

2,800

11,820

7,390

9,040

9,660

HWA-1198 * 1,260,000(2) 599's

8,860

1,536,600

974,400

13


$ 12,914 $ 16,978 $ 1,533 $3,333 $192 $467 $ 22,703

$ 15,911 $ 19,974 $ 1,533 $3,667 $192 $467 $ 26,033

$ 20,206 $ 24,642 $ 1,760 $4,067 $192 $467 $ 31,327

$ 25,634 $ 30,070 $ 1,760 $4,473 $192 $467 $ 37,155

$ 29,763 $ 34,362 $ 1,760 $4,880 $192 $467 $ 41,847

$ 38,936 $ 43,536 N/A $3,692 $391 $467 $ 49,393

$ 43,102 $ 48,496 N/A $4,430 $472 $467 $ 55,394

$ 52,528 $ 58,147 N/A $5,317 $472 $467 $ 66,198

-$1,046

2 YEAR LIMITED ON PARTS10 YEAR PRORATED WARRANTY ON HEAT EXCHANGER FOB BELLEVILLE, MI

ELECTRIC DISCONNECT PANEL Electric service breaker panel, pre-wired and rack mounted.

WARRANTY SHIPPING INFORMATION

OPTIONAL MECHANICAL BOILER CONTROL - DEDUCT FROM SYSTEM PRICE Note: Maximum efficiency results from utilizing sophisticated electronic controls. Therefore we do not recommend use of mechanical type controls but offer them as an economical alternative to the Therm-mizer digital control.


FLOOR STAND (Xfyre)

THERMIZER ENERGY MANAGEMENT CONTROL

Included in all basic and complete system packages. Digitally monitors ice prevention system temperatures, enables zone pump(s) and boiler operation, initiates warm weather shuit down, and displays system status. (Pre-wired on complete systems).

Custom fabricated for X-fyre units to raise boiler off of floor and provide appropriate pitch for condensate grainage. Made of durable, powder coated, 3/16" steel with provisions for mounting controls and Air-X tank.

PRE-PLUMBED MANIFOLD Fabricated with Type K copper, pressure tested to 100 psi for leak free installation, specifically engineered to maximize system flow and efficiency.

CONDENSATE MANIFOLD To neutralize condensate water prior to flowing to drain.

XT-1005

XT-2005 1,999,000

* BOILER ONLY

** BASIC PACKAGE

Inlcudes boiler(s), primary pump(s), properly sizd single zone pump, single zone digital pump control, Air-X Tank, and system installation kit.

*** COMPLETE SYSTEM

Includes the basic package items and adds pre-plumbed manifold (standard design), condensate manifold, gas supply manifold (where applicable), electrical service panel, and wall mount or free standing rack (depending on application). All pumps and controls are pre-wired. (Custom designed pre-plumbed manifolds are available. Call for quote.)

Includes boiler(s) and primary pump(s) as required.

XT-1505 1,500,000

999,000

X-THERM - VERTICAL, SEALED COMBUSTION, CONDENSING TYPE

500,000

XF-850

400,000

700,000

850,000

XF-400

XF-700

XF-500

XF-300 300,000

X-FYRE - SEALED COMBUSTION, CONDENSING TYPE

ULTRA HIGH EFFICIENCY BOILERSICE PREVENTION / SNOW MELT / FLOOR HEAT / DE-ICING

COMPLETE SYSTEM

***MODEL NUMBER BTU INPUT

BOILERONLY

*

BASICPACKAGE

**

OPTIONAL EQUIPMENT (INCLUDED IN COMPLETE SYSTEM PRICE)

ELECTRIC DISCONNECT

PANEL

FLOORSTAND


CONDENSATE MANIFOLD

14



$3,102 $5,527 $8,304 $10,815

$3,289 $5,900 $8,864 $11,562

$3,381 $6,084 $9,140 $11,930

$3,473 $6,268 $9,416 $12,298

$2,369 $4,060 $6,104 $7,882

$2,041 $2,585 $3,272

Zone piping added to single zone manifold Therm-mizer digital mutli-zone pump controlProperly sized zone pump(s) as required Low loss Air-X tank upgrade.

7,760

3,250

4,070

5,6906,570

1,036,600850,000 7,970 6,9109,420X-fyre 850 (XF-850)

700,000

487,800

609,800

X-fyre 400 (XF-400)

X-fyre 500 (XF-500)

X-fyre 700 (XF-700) 853,700

400,000

500,000 3,590

5,020

BOILER SELECTION GUIDEICE PREVENTION - ULTRA HIGH EFFICIENCY

HighEfficiency

Approximate AtmosphericEquivalent

@10° F

(110 BTU / SQ FT)

@0° F

(130 BTU / SQ FT)

@-10° F

(150 BTU / SQ FT)

@- 20° F

(170 BTU / SQ FT)

CAPACITY (SQUARE FEET)

Snow Melting Control(Add to single or multi-zone systems)

MULTI-ZONE - XT-1505 - 2005

MODELS

Multi-zone Therm-mizer Digital Control, Zone Pump(s) and Air-X Tank upgrade without pre-plumbed manifold

PROPAK AND RAYPAK MODELS

Digital control, water tight enclosure, snow detector sensor (with 65 ft. cable) and sensor socket.

MULTI-ZONE - XF-300 - 500

MULTI-ZONE - XF-700 - 850

MULTI-ZONE - XT-1005

SNOW MELT OPTIONS SNOW MELT ONLY UP TO 2 ZONES UP TO 5 ZONES

9,370 7,170

10,760

14,34016,250

8,120

12,20014,070

18,7502,437,8001,999,000

16,6301,829,300

22,160

1,500,000

X-therm 2005 (XT-2005)

999,000 11,0801,218,300

2,810

3,750

4,690

4,430

5,540

300,000X-fyre 300 (XF-300)

BTU INPUT

2,440365,900 3,330

6,100

2,150

2,870

X-therm 1005 (XT-1005)

Additional Multi-unit configurations available. Call for quote.

NUMBER OF ZONES

2 ZONES 3 ZONES 4 ZONES 5 ZONES

MULTI-ZONE OPTIONS(ADD TO PACKAGE PRICE ON PAGE 14)

Upgrade a single zone zyztem to a multi-zone, digital controller system (or multi-zone with snow melting). Package price includes the following:

X-therm 1505 (XT-1505)

15

HURON VALLEY SALES, INC.Phone (734) 944-5200 Fax (734) 944-5800 Effective: January 1, 2014

1/2 HP $ 4,204 $ 6,331 $286 $331 $293 $3,067 $ 10,308

1/2 HP $ 4,665 $ 6,792 $286 $331 $293 $3,067 $ 10,769

1/2 HP $ 5,829 $ 7,956 $286 $368 $333 $3,067 $ 12,010

3/4 HP $ 6,001 $ 8,501 $286 $368 $333 $3,067 $ 12,554

3/4 HP $ 8,657 $ 11,156 $286 $368 $379 $3,400 $ 15,588

3/4 HP $ 9,625 $ 12,125 $286 $469 $379 $3,400 $ 16,658

1-1/2 HP $ 10,344 $13,876 $286 $469 $395 $3,747 $18,772

2 HP $ 11,896 $15,654 $286 $501 $395 $3,747 $20,582

2 HP $ 12,954 $16,712 $286 $501 $413 $4,133 $22,046

1-1/2 HP $ 13,945 $17,477 $286 $501 $413 $4,133 $22,810

1-1/2 HP $ 15,191 $18,723 $286 $501 N/A $4,133 $23,643

1-1/2 HP $ 16,777 $20,309 $286 $501 N/A $4,547 $25,642

3 HP $ 17,136 $21,268 $286 $501 N/A $4,547 $26,601

3 HP $ 18,280 $22,412 $286 $542 N/A $4,547 $27,786

3 HP $ 20,031 $24,163 $286 $542 N/A $4,547 $29,537

• Propane Gas Trim (L.P.) $250 • Dual Thermostat Operating System with slabstat. $466

• Dual Electronic Operating System with slab sensor. $615 • Energy Saver Control - with time clock and override $547thermostat pre-wired


DUAL THERMOSTAT

List Price List Price OPTIONAL

Adds a +/- 1° airstat and inline thermostat well to use with the slabstat (or return stat) providing improved operating efficiency and system performance.

MAKE UP AIR Provides combustion make up air in enclosed, unvented equipment rooms.

FLOOR STAND

*** COMPLETE SYSTEM

Includes all the above with dual thermostat (pre-wired), make-up air, floor stand and pre-plumbed single zone manifold.

* BOILER ONLY

** BASIC PACKAGE

Includes boiler and draft hood only

Includes boiler, draft hood, properly sized single zone pump and Air-X tank.

334,000


COMPLETE SYSTEM

***BASIC

PACKAGE **DUAL

THERMOSTATMAKE-UP

AIR FLOOR STAND

1,337,000

TD5-9-163B

STANDARD PUMP HP RATING

BOILER ONLY *

825,000

962,000

399,000

512,000

181,000

264,000

1,826,000

MODEL NUMBER

TD5-9-40B

TD5-9-51B

TD5-9-62B

TD5-9-18B +

TD5-9-26B +

TD5-9-182B

MAXIMUMBTU INPUT

1,467,000

TD5-9-33B

1,630,000

TD5-9-133B

TD5-9-146B

TD5-9-112B

TD5-9-122B

1,125,000

1,223,000

TD5-9-72B

TD5-9-82B

TD5-9-96B

MODULATING ATMOSPHERIC BOILERSFOR

ICE PREVENTION / SNOW MELT / FLOOR HEAT / DE-ICING

627,000

726,000

Raises boiler 30" off the floor for corrosion protection and allow proper alignment for pre-plumbed manifold.

+ These models no longer available with modulation. Two stage fired boilers used for these sizes.IMPORTANT: Check State Boiler Code Requirements on page 5.STOCK: F.O.B. Belleville, Michigan


NOTES

16


• Special ethylene glycol boilers • Low range modulating gas valve (110° TO 170°F) • All bronze and cupro-nickel heat exchanger preset at 140°F. • Flow switch mounted and wired • Modulating burner control with 5:1 turndown ratio • Dual high limits: • Temperature and pressure gauge (1) Manual reset high limit (bulb to be placed in air-x tank) • Pressure relief valve (1) Automatic reset high limit • Electronic ignition system • Economaster II pump control • Stainless steel burners

Elevation Adjustment Note:

ELEVATION AND LP GAS ADJUSTMENTS

TD5-413B

TD5-9146B

TD5-9163B

TD5-9182B

TD5-9133B

TD5-996B

TD5-982B

TD5-972B

10,740

BTU INPUT

1,337,000

1,467,000

1,630,000

962,000

825,000

726,000

12,150 10,280 8,910 7,860

8,630

14,820 12,540 10,870 9,590

1,826,000

11,280 9,780

11,120 9,410 8,150

16,600 14,050 12,170

13,340

7,190TD5-9122B 1,223,000

10,230 8,650 7,500 6,620TD5-9112B 1,125,000

8,750 7,400 6,410 5,660

7,500 6,350 5,500 4,850

4,180 3,690

6,600 5,580 4,840 4,270

4,650 3,940

5,700 4,820

TD5-951B 512,000

TD5-962B 627,000

2,660 2,350

3,410 3,010

3,040 2,570

3,630 3,070

TD5-930B 334,000

TD5-940B 399,000

1,760 1,550

2,230 1,960

TD5-926B 264,000

1,650 1,390

2,400 2,030

1,210 1,060TD5-918B 181,000

1,240 1,050 910 800

LP GAS ADJUSTMENT

PROPAK ATMOSPHERIC BOILER FEATURES:

BOILER SELECTION GUIDEICE PREVENTION - ATMOSPHERIC BOILERS

MODEL NUMBER

CAPACITY (SQUARE FEET)@

10° F(110 BTU / SQ FT)

@0° F

(130 BTU / SQ FT)

@-10° F

(150 BTU / SQ FT)

@- 20° F

(170 BTU / SQ FT)

136,000

5,000 Ft. above sea level equates to a 20% BTU rating increase ( 5 X 4% ). Applies to atmospheric boilers only

MODEL Adjustment133 - 400 N/A514 - 824

The boiler required is now a TD5-951B (514 MBTU) to compensate.

6 % (.94)8 % (.92)

N/A

Boiler sizing on this page is based on installation at sea level. For applications above sea level, the boiler sizing must be increased at a rate of 4% for every 1,000 ft. above sea level.

Elevation Adjustment Example:Normally a 2,952 sq.ft.area requires a TD5-940B (400 MBTU).

962 - 18262100 - 4001

17


1/2 HP $ 8,156 $ 12,194 $286 N/A $333 $3,067 $ 15,879

3/4 HP $ 10,755 $ 14,793 $286 N/A $333 $3,067 $ 18,478

3/4 HP $ 12,981 $ 17,391 $286 N/A $379 $3,400 $ 21,456

3/4 HP $ 13,660 $ 18,070 $286 N/A $379 $3,400 $ 22,134

1-1/2 HP $ 14,086 $19,910 $286 N/A $395 $3,747 $24,337

2 HP $ 15,866 $21,690 $286 N/A $395 $3,747 $26,117

2 HP $ 17,337 $23,426 $286 N/A $413 $4,133 $28,258

1-1/2 HP $ 20,229 $26,317 $286 N/A $413 $4,133 $31,150

1-1/2 HP $ 22,837 $28,699 $286 N/A N/A $4,133 $33,118

1-1/2 HP $ 23,757 $29,619 $286 N/A N/A $4,547 $34,452

3 HP $ 27,772 $33,853 $286 N/A N/A $4,547 $38,685

3 HP $ 31,905 $37,986 $286 N/A N/A $4,547 $42,818

• Propane Gas Trim (L.P.) $250 • Dual Thermostat Operating System with slabstat. $466

• Dual Electronic Operating System with slab sensor. $615 • Energy Saver Control - with time clock and override $547thermostat pre-wired

750,000

Raises boiler 30" off the floor for corrosion protection and allow proper alignment for pre-plumbed manifold. Optional stands are available for stacking two boilers (ask for a quote).

IMPORTANT: Check State Boiler Code Requirements on page 5.STOCK: F.O.B. Belleville, Michigan


NOTES

TD4-8153B

1,260,000

1,530,000

TD2-875B

TD2-890B

TD3-899B

FAN ASSISTED BOILERSFOR

ICE PREVENTION / SNOW MELT / FLOOR HEAT / DE-ICING

650,000

TD2-850B

TD2-865B

MAXIMUMBTU INPUT

2,070,000

TD2-83B

2,340,000

TD4-8180B

TD4-8207B

TD4-8126B

1,800,000

TD4-8234B


BOILER ONLY *

900,000

992,000

399,000

500,000

MODEL NUMBER

TD2-840B

300,000


COMPLETE SYSTEM

***BASIC

PACKAGE **DUAL

THERMOSTATMAKE-UP

AIR FLOOR STAND

*** COMPLETE SYSTEM

Includes all the above with dual thermostat (pre-wired), floor stand and pre-plumbed manifold (for a single zone system).

* BOILER ONLY

** BASIC PACKAGE

Includes boiler only.

Includes boiler, properly sized single zone pump, and Air-X tank.


DUAL THERMOSTAT

List Price List Price OPTIONAL

Adds a +/- 1° airstat and inline thermostat well to use with the slabstat (or return stat) providing improved operating efficiency and system performance.

FLOOR STAND

18


• Special ethylene glycol boilers • Stage fired (1 - 4), example: TD3 = 3 firing stages • All bronze and cupro-nickel heat exchanger • Stackable with minimal clearances • Direct vent (sealed combustion) capable • Reduced vent sizes • CSD-1 Code Trim • Side wall vent capable • Circulating pump with Economaster pump control • Y-Series Electronic Control with outdoor reset

Elevation Adjustment Note:

Boiler sizing on this page is based on installations up to 5,000 feet above sea level. For applications above 5,000 feet, consult the factory.

LP Gas

Boiler must be factory ordered with specific gas type. Field conversion is not authorized.

PROPAK FAN ASSISTED BOILER FEATURES:

BOILER SELECTION GUIDEICE PREVENTION - FAN ASSISTED BOILERS

MODEL NUMBER

CAPACITY (SQUARE FEET)@

10° F(110 BTU / SQ FT)

@0° F

(130 BTU / SQ FT)

@-10° F

(150 BTU / SQ FT)

@- 20° F

(170 BTU / SQ FT)

BTU INPUT

4,580

300,000

3,170 2,790399,000

3,970 3,500

2,380 2,100TD2-830B

TD2-840B

3,250 2,750

4,320 3,650

TD2-850B

TD2-865B 650,000 7,030

500,000 5,410

5,950 5,160 4,550

8,120 6,870 5,950 5,250

9,740 8,240 7,140 6,300

8,820TD4-8126B 1,260,000

10,740 9,080 7,870 6,950

TD4-8153B 1,530,000

13,640 11,540

2,340,000

18,960 16,430

16,560 14,010 12,140

25,320 21,430 18,570

22,4002,070,000

992,000

900,000

14,500

19,480 16,480 14,290 12,610

10,710

10,000

750,000

ELEVATION AND LP GAS ADJUSTMENTS - FAN ASSISTED BOILERS

TD4-8207B

TD4-8234B

TD4-8180B

TD3-899B

TD2-890B

TD2-875B

16,390

1,800,000

19


In Out Model / Inches List Price List PriceTD5-9-13B 136 34 68 EF 6 6" $ 331 PAI-4 8" $ 1,828TD5-9-18B 186 47 92 EF 6 6" $ 331 PAI-4 8" $ 1,828TD5-9-26B 264 66 132 EF 6 6" $ 331 PAI-4 8" $ 1,828TD5-9-33B 333 84 168 EF 8 8" $ 368 PAI-4 8" $ 1,828TD5-9-40B 399 100 200 EF 8 8" $ 368 PAI-4 8" $ 1,828TD5-9-51B 512 128 256 EF 8 8" $ 368 PAI-6 10" $ 2,865TD5-9-62B 627 157 314 EF 10 10" $ 469 PAI-6 10" $ 2,865TD5-9-72B 726 182 363 EF 10 10" $ 469 PAI-6 10" $ 2,865TD5-9-82B 825 207 413 EF 12 12" $ 501 PAI-6 10" $ 2,865TD5-9-96B 962 241 481 EF 12 12" $ 501 PAI-6 10" $ 2,865TD5-9-112B 1,125 282 563 EF 12 12" $ 501 PAI-6 10" $ 2,865TD5-9-122B 1,223 306 612 EF 12 12" $ 501 PAI-6 10" $ 2,865TD5-9-133B 1,337 335 668 EF 12 12" $ 501 PAI-7 12" $ 3,892TD5-9-146B 1,467 367 774 EF 12 12" $ 501 PAI-7 12" $ 3,892TD5-9-163B 1,630 408 815 EF 14 14" $ 542 PAI-7 12" $ 3,892TD5-9-182B 1,826 457 913 EF 14 14" $ 542 PAI-7 12" $ 3,892TD6-18-210B 2,100 525 1,050 EF 14 14" $ 542 PAI-7 12" $ 3,892TD6-18-250B 2,499 625 1,250 (2) EF 12 12" $ 902 (2) PAI-7 12" $ 7,415TD6-18-300B 3,000 750 1,500 (2) EF 12 12" $ 902 (2) PAI-7 12" $ 7,415TD6-18-350B 3,500 875 1,750 (2) EF 12 12" $ 902 (2) PAI-7 12" $ 7,415TD6-18-400B 4,000 1,000 2,000 (2) EF 14 14" $ 999 (2) PAI-7 12" $ 7,415

Model List Price Model List PriceTD5-9-13B 6" 4" DJ-3 $ 695 6" 4" HSUL-1 $ 1,137TD5-9-18B 6" 4" 008757 $ 889 6" 4" 008757 $ 889TD5-9-26B 7" 4" 008757 $ 889 7" 4" 008757 $ 889TD5-9-33B 8" 4" 008758 $ 894 8" 4" 008758 $ 894TD5-9-40B 9" 4" 008758 $ 894 9" 4" 008758 $ 894TD5-9-51B 10" 8" I $ 1,263 10" 8" HSUL-2 $ 1,377TD5-9-62B 12" 8" I $ 1,263 12" 8" HS-3 $ 2,327TD5-9-72B 12" 8" I $ 1,263 12" 8" HS-4 $ 2,811TD5-9-82B 14" 8" I $ 1,263 14" 8" HS-4 $ 2,811TD5-9-96B 14" 10" I $ 1,263 14" 10" HS-4 $ 2,811TD5-9-112B 16" 10" I $ 1,263 16" 10" HS-4 $ 2,811TD5-9-122B 16" 10" I $ 1,263 16" 10" HS-5 $ 3,608TD5-9-133B 18" 10" IL $ 1,411 18" 10" HS-5 $ 3,608TD5-9-146B 18" 10" IL $ 1,411 18" 10" HS-5 $ 3,608TD5-9-163B 18" 10" IL $ 1,411 18" 10" HS-5 $ 3,608TD5-9-182B 20" 10" IL $ 1,411 20" 10" HS-5 * $ 3,608TD6-18-210B 24" 16" XL $ 2,419 24" 16"TD6-18-250B 26" 16" XL $ 2,419 26" 16"TD6-18-300B 28" 16" XL $ 2,419 28" 16"TD6-18-350B 30" 16" XL $ 2,419 30" 16"TD6-18-400B 32" 16" XL $ 2,419 32" 16"

Pricing includes pre-wiring, relays and prover s

N/AN/A

* Maximum Up To 25' of Vent

Enforcer

Model / Inches

N/AN/AN/A

BoilerVent Size

Side Wall Vent

LIST PRICE SHEET

Square InchesFree Air Required CFMRequired

Draft Inducer Sizing GuideVent

Reduces To

MAKE-UP AIR REQUIREMENTSBoiler

Model NumberDuct Fan

BoilerModel Number Vent Size

VentReduces

To

Draft Inducer

Side Wall Vent Kits

20


Model Firing Rate BTU Input Pump Supplied List Price

L-12 1.1 154,000 150-153280 $ 10,373

L-14 1.35 188,000 150-153280 $ 10,581

L-17 1.65 231,000 150-153280 $ 10,792

L-20 2.0 280,000 150-153280 $ 11,327

L-25 2.5 350,000 150-153280 $ 11,571

Model Firing Rate BTU Input Pump Supplied List Price

K-360 3.0 420,000 150-1532160 $ 19,537

K-450 4.0 560,000 150-1532160 $ 20,010

K-530 4.5 630,000 150-1532160 $ 22,179

K-610 5.0 700,000 150-1550160 $ 25,828

K-730 6.0 840,000 150-1550160 $ 28,534

K-890 7.5 1,050,000 150-1550240 $ 32,764

K-900 9.0 1,260,000 150-1580160 $ 33,480

K-1000 10.0 1,400,000 150-1580160 $ 37,468

K-1250 12.5 1,750,000 150-1580160 $ 39,705

NOTES:

Boiler package includes expansion tank, proper pump, low water cut off, pump relay, and openings not used to be plugged, high limit locked at 150° F.

F.O.B. Wyoming, Illinois

LIST PRICE SHEET

ALDRICHOIL FIRED BOILERS

21


$ 1,023 $ 935$ 1,201 $ 1,123$ 1,379 $ 1,311$ 1,563 $ 1,509$ 1,792 $ 1,757

Optional: Thermostat with waterproof enclosure (TF-115)

$ 2,278 $ 2,614$ 2,766 $ 3,094$ 3,437 $ 3,728$ 2,014 $ 2,351$ 2,258 $ 2,595$ 2,502 $ 2,830$ 2,611 $ 2,934$ 2,848 $ 3,130$ 2,930 $ 3,239$ 3,174 $ 3,464

$ 3,844 $ 4,313$ 5,657 $ 6,182$ 7,171 $ 7,667$ 3,310 $ 3,779$ 4,186 $ 4,688$ 5,123 $ 5,648$ 6,101 $ 6,616$ 6,637 $ 7,133

$ 88 N/A$ 96 $ 187

$ 11,912$ 11,912$ 11,912$ 12,291$ 12,291

$ 910$ 222INLET AIR GUARD - FACTORY INSTALLED

OPTIONAL

STRAIGHT

DX3-S-50 Nat. or Propane 50' 150 - 200,000 STRAIGHT

LEFT HAND CONNECTION - GAS SUPPLY & CONTROLS2

7,000

7,800

PRICE

Model - Stainless Steel Length BTU Input TYPE List Price List PriceTwo Stage

45o Elbow - 45E

OUTPUT(CFM)

1-1/21-1/2

2

7,0007,0007,800

40'

50'

60'

1-1/2

OPTIONAL

HP

DX2-S-60-SS Nat. or PropaneDX2-S-50-SS Nat. or PropaneDX2-S-40-SS Nat. or Propane

30'

90o Elbow - E6StainlessStainless

Length

10'

List Price

150,000 STRAIGHT50'60'

List PriceTwo Stage

50 - 75,000

BTU Input

125 - 150,000 STRAIGHT

100,000 STRAIGHT125 - 150,000 STRAIGHT

STRAIGHT

40'DX2-S-30-SS Nat. or PropaneDX2-S-20-SS Nat. or Propane 75,000

30'20'

U-BENDDX2-U-60-SS Nat. or Propane 150,000

150 - 175,000

U-BENDDX2-U-40-SS Nat. or Propane 100 - 150,000 U-BEND20'

10'DX2-U-20-SS Nat. or Propane 75,000

DX3-U-20 Nat. or PropaneDX3-U-40 Nat. or PropaneDX3-U-60 Nat. or Propane

20'30'

50 - 125,00020'30'

150 - 200,00050 - 75,000

Model - Aluminized Steel

DOOR JET HEATERS (INCLUDES DOOR LIMIT SWITCH)

DX3-S-50 Nat. or Propane 100 - 125,000

U-BENDU-BEND

STRAIGHTDX3-S-30 Nat. or Propane

50 - 150,000

DX3-S-20 Nat. or Propane

STRAIGHT

STRAIGHT

STRAIGHT

Tube heating systems include: Chain sets, flexible gas line, waterproof outdoor thermostat, gas shutoff valve, exhaust cap, inlet collar and screened inlet vent.

50 - 125,000DX3-S-40 Nat. or Propane

DX3-S-60 Nat. or Propane 150 - 200,000

DX3-S-40 Nat. or Propane 40'

45,000 - 60,00075,000 - 100,000

130,000

CAR WASH TUNNEL TUBE HEATERS

DR-45 thru 60 NMV-2 / NFS-2DR-75 thru 100 NMV-2 / NFS-2DR-130 NMV-2 / NFS-2DR-160 NMV-2 / NFS-2

$ 154

INFRA-RED EQUIPMENT ROOM HEATERSBTU Input

30,000Millivolt Electronic

ModelMillivolt / Electronic

DR-30 NMV-2 / NFS-2

DJTE-55DJTE-65DJTE-75

Millivolt System includes: Millivolt control, manual ignition, constant pilot, 100% shutoff, flex line, chain set, gas shutoff valve, self-energizing thermostat. Recommended for emergency backup heat.Electronic System includes: Direct spark, 120V w/pathed circuit board, thermostat (ET5-SS), flex line, chain set, and gas shut-off valve.

TYPE

MODEL MOTOR TYPE MATERIAL

STRAIGHT

TEFCTEFCTEFCTEFC

DJTE-95

160,000

U-BEND

TEFC

STAINLESSSTAINLESSSTAINLESSSTAINLESSSTAINLESS

DJTE-85

22


DescriptionGAS – Single Rail & Duct NAT(1) P30-30F HEATER ( 30,000 BTU ) $ 1,394(1) VR-15F EXPANSION TANK(1) 150-151542 GRUNDFOS CIRCULATING PUMP(1) T675A-1011 OUTDOOR THERMOSTAT ( plus or minus 1°F. ) LP(1) WATTS 335 30 PSI PRESSURE RELIEF VALVE $ 1,644

Gas fired heater to prevent water lines in duct from freezing or to prevent ice from forming on overhead track rails.

GAS – Dual Rail & Duct NAT(1) P50-50 HEATER ( 50,000 BTU ) $ 2,268(1) VR-30F EXPANSION TANK(1) 150-1543100F-1 GRUNDFOS CIRCULATING PUMP(1) T675A-1011 OUTDOOR THERMOSTAT ( plus or minus 1°F. ) LP(1) WATTS 335 30 PSI PRESSURE RELIEF VALVE $ 2,518

Gas fired heater to prevent water lines in duct from freezing or to prevent ice from forming on overhead track rails.

ELECTRIC – Single Rail & Duct(1) PEP-6 6 GALLON ELECTRIC HEATER ( 240 VOLT 6 KW ) $ 1,097(1) VR-15F EXPANSION TANK(1) 150-151542 GRUNDFOS CIRCULATING PUMP(1) T675A-1011 OUTDOOR THERMOSTAT ( plus or minus 1°F. )(1) WATTS 335 30 PSI PRESSURE RELIEF VALVE(1) AS-36111A WALL MOUNT BRACKET

Electric heater to prevent water lines in duct area from freezing or to prevent ice from forming on overhead track rails.

RAIL HEAT OPTION FOR HIGH EFFICIENCY BOILERSAvailable as a stand alone system for our ice prevention boiler systems $ 3,170

DescriptionELECTRIC(1) PEP-6 6 GALLON ELECTRIC HEATER ( 240 VOLT 6 KW ) $ 1,071(1) T675A-1011 OUTDOOR THERMOSTAT ( plus or minus 1°F. )(1) 3L PRESSURE RELIEF VALVE(1) 560 G PRESSURE REGULATOR WITH FITTINGS(1) AS-36111A WALL MOUNT BRACKET

To prevent freeze-up at guns and hoses with the least amount of water.

NOTES: – 1 YEAR WARRANTY – STOCK: F.O.B. Belleville, MI

List Price WEEP HEATING SYSTEM

RAIL and DUCT HEATING SYSTEMSLIST PRICE SHEET

List Price

Includes double wall heat exchanger, manifold, pre-wired electronic controls, circulating pumps, thermometers, and thermal expansion tank.

23


$ 241

$ 241

$ 363

$ 363

$ 398

$ 398

$ 396

$ 396

$ 89

$ 53

$ 31

$ 29

$ 1,126

$ 163

$ 131

$ 650

$ 932

$ 1,976

$ 562 $ 866

$ 561 $ 866

$ 572 $ 848

$ 1,277 $ 2,216

$ 1,650 $ 2,856

$ 1,644 $ 2,833

$ 605 $ 891

$ 1,813 $ 3,240

$ 2,607 $ 4,866 1-1/2 115 / 208 / 230 2" YES

YES

0-30 3/4 115 / 208 / 230 1-1/2" YES

0-50 1/2 115 / 208 / 230 1-1/2"

115 / 208 / 230 1-1/4" YES

0-30 3/4 115 / 208 / 230 1-1/2" YES

0-25 1/2

ListCast Iron

ListBronze / SS

0-10 1/12 115 / 208 / 230 3/4 - 1-1/2" NO

Multi-SpeedVoltage Available

150-1543100

150-155080/4

150-1550160

YES40-80 3/4 115 / 208 / 230 2"

60-100

List

E04-016-290

Fan Assembly - 199-399

150-154080/4

150-1526116

150-153280

150-1532160

5-25 1/6 115 / 208 / 230

Inlet / Outlet Sensor

155oF High Limit

Control Board

195oF High Limit

Fan Assembly - 599

3/4 - 1-1/2" NO

NO

Flange Size

Includes refractory insulation, burner door gasket, ignitor gasket, replacement ignitor, inlet / outlet sensors, high limit control, instructions and instructional video on DVD.

Description

Ignitor Assembly with gasket

Other Service and Replacement Parts

List

E04-000-069

Display Board

Pressure Switch

Fan Assembly - 129

PROPAK Ice Prevention and Hot Water Supply SystemsCirculating Pumps and Common Replacement Parts

Primary Circulating Pumps

E00-74208-1K (10 mm)

E00-74209-1K (16 mm)Basic

E04-016-326

PROPAK TM Heat Exchanger Maintenance Kits(Required for Annual Boiler Service Procedure)

E04-016-346

Item NumberKit Description

Includes refractory insulation, burner door gasket, ignitor gasket, replacement ignitor, instructions and instructional video on DVD.

CompleteIce

Prevention

Includes refractory insulation, burner door gasket, ignitor gasket, replacement ignitor, inlet / outlet sensors, high limit control, instructions and instructional video on DVD.

E00-74208-4K (10 mm)

E00-74209-4K (16 mm)

BasicPlus

Includes refractory insulation, burner door gasket, ignitor gasket, replacement ignitor, inlet / outlet sensors, instructions and instructional video on DVD.

E00-74208-2K (10 mm)

E00-74209-2K (16 mm)

CompleteHot Water

E04-016-376

E04-000-062

E04-000-061

E00-74208-3K (10 mm)

E00-74209-3K (16 mm)

Item Number

E04-000-058

E04-016-287

E04-016-012

150-152696

150-152699

Description (min / max flow rate shown dependent on head loss)

Flow Rate HP Rating

0-20 1/6 115 / 208 / 230 3/4 - 1-1/2"

Item Number

24


HOT WATER SUPPLY SIZING GUIDETunnel Car Washes

FRESH WATER 1. SIZING INFORMATION (refer to wash equipment manufacturer's specifications for accurate sizing) Flow Rates of Equipment Using Hot Water: Example: Rocker Panel Brushes 2 @ 4 GPM each 8 GPM

Wrap Around Brushes 2 @ 4 GPM each 8 GPM Rinse Arch 20 GPM 20 GPM Cheater Wax Arch 6 GPM 6 GPM Hot Wax Arch - Optional - 30% Sales 6 GPM 1.8 GPM

Total Flow of Hot Water: 43.8 GPM Note: If Cheater Wax is not used with Hot Wax, then delete Hot Wax Option.

2. HIGH PRESSURE PRE-RINSE GUNS A) If High Presure Pre-Rinse Guns are used with Hot Water at entrance, assume 45 seconds total use with one or two guns. B) Flow Rate x .75 = Total Use Example: • 3.5 x .75 = GPC x Cars per Hour = DEMAND

• 3.5 x .75 = 2.63 GALLONS PER CAR• 2.63 x 8.33 x 70° T.R. ÷ .75 x 100 CPH = 204,473 BTU INPUT

ADD THE FOLLOWING TO ABOVE BTU INPUT FOR HEATER SIZE

3. DETERMINE CITY WATER TEMPERATURE IN YOUR AREA 4. DETERMINE DESIRED TEMPERATURE IN WASH 5. ASSUME THE FOLLOWING: A) Average Car Length = 17' B) Average Conveyor Speed = 40' per minute C) 100 Cars Per Hour Note: The hot water demand will remain the same as you speed up or slow down the conveyor to compensate for increase or decrease in volume - see example #2 below. Example #1 • 17' Car Length ÷ Conveyor Speed x Flow Rate = GALLONS PER CAR

• Gallons Per Car x Cars Per Hour = GALLONS PER HOUR REQUIRED• 17 ÷ 40 x 43.8 = 18.6 GPC ~ 18.6 GPC x 100 CPH = 1,861 GPH• Gallons Per Hour x 8.33 x Desired Temp. Rise (see City Water Temp Chart) ÷ .75 BTU Input• 1,861 x 8.33 x 70° ÷ .75 = 1,466,865 BTU INPUT

Example #2 • 125 Cars Per Hour ÷ 50' Per Minute Conveyor Speed• 17 ÷ 50 x 43.8 = 14.89 ~ 14.89 x 125 = 1,861 GPH• 150 Cars Per Hour ÷ 60' Per Minute Conveyor Speed• 17 ÷ 60 x 43.8 = 12.41 ~ 12.41 x 150 = 1,861 GPH

6. FOR ALTITUDES ABOVE 2,000' HEATER DOWN RATE 4% Per 1,000' Example: • 3,000' above sea level: 1,446,865 ÷ .88 = 1,644,164 BTU INPUT

7. SELECT HEATER & TANK Choose from Non-Modulating Sheet

RECLAIM WATER 1. DETERMINE USE OF HEATED RECLAIM WATER AS IN "FRESH WATER SIZING". 2. ASSUME THE FOLLOWING: A) Water will return to pit at 45° + 55° when tunnel is maintained at 50° F. B) Desire temperature 90° to 100° F.

3. SIZING THE HEATER 17 ÷ 40 43.8 x 100 8.33 x 65° T.R. ÷ .75 = 1,343,875 BTU INPUT.

4. ALTITUDE DOWN RATE SAME AS IN "FRESH WATER SIZING". 5. NOTE: A self-priming pump and industrial pressure switch are required with a foot valve mounted in the pit for each installation. A Remote Bulb Aquastat is required for controlling pit temperature.

26


FOR ALL HOTA. Nozzle Flow Rate x 50 Minutes per Hour x Number of Bays = GPH Demand Example: 3.5 GPM x 50 x 4 Bays = 700 Gallons per Hour.B. Gallons per Hour x 8.33 x Temp. Rise (see City Water Temp. Chart) ÷ .80 = BTU Required. 4 Bays, 3.5 GPM, 700 GPH, 40° F. City Water Area, Desired Temperature 120° F. Example: 700 x 8.3 x 80° Temperature Rise ÷ .75 = 621,973 BTU input required.FOR ALL HOT WITH FOAMING BRUSH Reduce input by 20%. Example: 621,973 x 80% = 497,587 BTU input required.FOR HOT WASH & COLD RINSE Reduce input by 30%. Example: 621,973 x 70% = 435,381 BTU input required.FOR HOT WASH WITH FOAMING BRUSH & COLD RINSE Reduce input by 20 & 30%, or 44% total. Example: 621,973 x 56% = 348,304 BTU input required.FOR ALTITUDES ABOVE 2,000' HEATER DOWN RATE 4% Per 1,000' Increase BTU input by 4% per 1,000 feet above sea level. Example: 621,973 ÷ .88 = 706,787 BTU input required.NOTE:The above applies only if you have enough storage in your float-filled orpressure tank to take advantage of the period when you have no hot water use.The above sizing guide is based on atmospheric operating equipment.

60° 70° 80° 85°

Hot Wash, Hot Rinse, Wax, 96,211 109,331 124,949 132,844Hot Wash, Cold Rinse, Wax 67,348 78,287 89,420 95,124Hot Wash, Hot Rinse, Wax, Foam Brush Pre-Soak 74,970 98,381 112,435 119,539Hot Wash, Hot Rinse, Wax, Foam Brush Pre-Soak Tire & Engine Cleaner 66,723 87,450 99,942 106,257Hot Wash, Cold Rinse, Wax, Foam Brush Pre-Soak 52,479 68,867 78,705 83,678Hot Wash, Cold Rinse, Wax, Foam Brush Pre-Soak Tire & Engine Cleaner 46,706 61,215 69,960 74,380

Hot Wash, Hot Rinse, Wax 109,331 127,553 145,775 154,985Hot Wash, Cold Rinse, Wax 78,718 89,287 102,042 108,489Hot Wash, Hot Rinse, Wax, Foam Brush Pre-Soak 98,397 114,797 131,196 139,486Hot Wash, Hot Rinse, Wax, Foam Brush Pre-Soak Tire & Engine Cleaner 87,465 102,042 116,619 123,987Hot Wash, Cold Rinse, Wax, Foam Brush Pre-Soak 68,878 80,358 91,837 97,640Hot Wash, Cold Rinse, Wax, Foam Brush Pre-Soak Tire & Engine Cleaner 61,225 71,429 81,633 86,791



HOT WATER SUPPLY SIZING GUIDESelf-Service Car Washes

BTU INPUT PER BAY

5.0 GPM FLOW RATE

BTU PER BAY

3.5 GPM FLOW RATE

4.0 GPM FLOW RATE

3.0 GPM FLOW RATE

27


$ 7,202 $ 9,713 $ 506 $2,667 $192 N / A $467 $ 13,544$ 7,251 $ 9,761 $ 506 $2,667 $192 N / A $467 $ 13,593$ 7,911 $ 10,421 $ 506 $2,933 $192 N / A $467 $ 14,519$ 8,651 $ 11,161 $ 506 $2,933 $192 N / A $467 $ 15,260

$ 11,980 $ 14,491 $ 506 $3,227 $192 N / A $467 $ 18,882$ 14,827 $ 17,338 $ 506 $3,400 $192 N / A $467 $ 21,903$ 22,066 $ 24,576 $ 506 $3,533 $192 N / A $467 $ 29,274

$ 14,662 $17,172 $ 679 $4,400 $192 $666 $745 $23,854$ 16,062 $18,572 $ 679 $4,400 $192 $666 $745 $25,254$ 29,814 $32,325 $ 679 $5,000 $192 $1,067 $745 $40,008$ 37,053 $39,563 $ 679 $5,133 $192 $1,067 $745 $47,380$ 44,291 $46,802 $ 679 $5,267 $192 $1,067 $745 $54,752$ 59,074 $61,585 $ 1,017 $6,200 $287 $1,267 $998 $71,353$ 66,377 $68,887 $ 1,017 $6,933 $287 $1,267 $998 $79,389$ 88,462 $90,973 $ 1,253 $7,667 $383 $1,611 $1,328 $103,216

$1,232 $1,848 TRIPLE $1,848 QUAD

-$623 $469 $956 $3,299 $5,713

$1,035 $975

GAS LINE MANIFOLD Adequately sized for proper gas flow and pressure, pressure tested to 100 psi, and made for convenient trouble free installaion.

ELECTRIC DISCONNECT PANEL Electric service breaker panel, pre-wired and rack mounted (where applicable)

PRE-PLUMBED MANIFOLD Fabricated with Type K copper, pressure tested to 100 psi for leak free installation, and engineered to maximize system flow and efficiency.


Includes boiler(s), primary pump(s), and install kit.


WALL MOUNTING RACKCustom fabricated for mounting TM boilers on the wall. Made with durable, 3/16" powder coated steel. Provides proper pitch for condensate drainage. Legs available for free standing installations. Custom fabricated racks and stands available.

* BOILER ONLY

ELECTRIC DISCONNECT

PANEL

WALL MOUNTING

RACK


CONDENSATE MANIFOLD

GAS LINE MANIFOLD

TM SINGLE UNIT BOILER

COMPLETE SYSTEM

***

HWD 079 80,000

ULTRA HIGH EFFICIENCY HOT WATER SUPPLY BOILERS & SYSTEMS

MODEL NUMBER BTU INPUT

BOILERONLY

*

BASICPACKAGE

**

HWD 129 136,300HWD 179 180,000HWD 199 199,000HWD 299 299,000HWD 399 399,999HWD 599 630,000

TM MULTI UNIT CONFIGURATIONS (OTHER CONFIGURATIONS AVAILABLE)HWD 258 272,000HWD 328 335,000HWD 798 799,000HWD 998 1,029,900HWD1198 1,260,000HWD 1597 1,659,000HWD 1797 1,890,000HWD 2396 2,520,000

ASME & ETL CERTIFIEDMeets Low NOx Requirements

Cascaded Control Included on Multi-Unit Sizes

*** COMPLETE SYSTEM

** BASIC PACKAGE

Includes the basic package items and adds pre-plumbed manifold (standard design), condensate manifold, gas supply manifold (if applicable), electrical service panel, and wall mount or free standing rack (depending on application). All pumps and controls are pre-wired. (Custom designed pre-plumbed manifolds are available. Call for quote.)

Includes boiler(s), primary pump(s), installation kit, 115 gallon non-ASME storage tank, non-ASME thermal expansion tank, tank thermometer and pressure relief valve.

Warranty Information2 Years on parts - 10 years on heat exchanger

BASIC AND COMPLETE SYSTEM ADDITIONS AND DEDUCTIONS

THERMAL EXPANSION TANK

TTA-5 ASME - Add TTA-12 ASME - Add

ST175AAdd

Free Standing Rack Upgrade Option (Add to wall mounting rack price)

Call for QuoteSINGLE DOUBLE

ST120AAddSTORAGE TANK

VST 350AAdd

ST 80Deduct

ST80AAdd

28


5,748

3,079 3,592 4,311

HWD-2396 * (4) 599's 2,520,000 3,072,000 3,592 4,106 4,790

(3) 599's 1,890,000 2,304,000 2,694

* Cascade System = 2 or more units combined. Additional multi-unit configurations available.

HWD-1597 * (2) 599's + (1) 399 1,659,000 2,004,000 2,365 2,703 3,153 3,784

HWD-1797 *

1,796 2,053 2,395 2,874HWD-1198 * (2) 599's 1,260,000 1,536,000

1,468 1,678 1,958 2,349HWD-998 * (1) 399 + (1) 599 1,029,900 1,236,000

1,139 1,302 1,519 1,822HWD-798 * (2) 399's 799,000 936,000

898 1,026 1,197 1,437HWD-599 630,000 768,000

570 652 760 912HWD-399 399,999 468,000

478 546 637 764HWD-328 * (1) 129 + (1) 199 335,000 409,000

426 487 568 682HWD-299 299,000 364,000

388 443 517 620HWD-258 * (2) 129's 272,000 334,000

284 324 378 454HWD-199 199,000 242,000

257 293 342 411HWD-179 180,000 219,900

194 222 259 311HWD-129 136,300 167,000

@ 60° FT

@ 50° FT

HWD-079 80,000 99,900 114 130 152 182

BOILER SELECTION GUIDE(UP TO 2,000 FT. ELEVATION)

HOT WATER SUPPLY - ULTRA HIGH EFFICIENCY

Cascade SystemCombination

BTU INPUT CAPACITY (GALLONS PER HOUR)

HighEfficiency

AtmosphericEquivalent

@ 80° FT

@ 70° FT

29


$ 13,154 $ 15,664 $ 293 $3,067 $391 N/A $467 $ 19,882$ 15,111 $ 17,621 $ 293 $3,400 $391 N/A $467 $ 22,172$ 19,406 $ 21,917 $ 333 $3,800 $391 N/A $467 $ 26,908$ 24,267 $ 26,778 $ 333 $4,067 $391 N/A $467 $ 32,035$ 30,143 $ 32,653 $ 333 $4,467 $391 N/A $467 $ 38,311

$ 38,903 $ 41,413 N/A $4,467 $391 N/A $467 $ 46,737$ 42,459 $ 44,970 N/A $5,227 $472 N/A $467 $ 51,135$ 51,885 $ 54,395 N/A $6,379 $472 N/A $467 $ 61,712

-$623 $469 $956 $3,299 $5,713

$1,035 $975

GAS LINE MANIFOLD Adequately sized for proper gas flow and pressure, pressure tested to 100 psi, and made for convenient trouble free installaion.

ELECTRIC DISCONNECT PANEL Electric service breaker panel, pre-wired and rack mounted (where applicable)

PRE-PLUMBED MANIFOLD Fabricated with Type K copper, pressure tested to 100 psi for leak free installation, and engineered to maximize system flow and efficiency.


* BOILER ONLY

XF-400 400,000

XF-700 700,000XF-500 500,000

XT-1505

ST120AAdd

1,500,000XT-2005 1,999,000

Includes boiler(s), primary pump(s), and install kit.


FLOOR STAND Custom fabricated, made with durable 3/16" powder coted steel. Provides proper pitch for condensate drainage and raises boiler off the floor for corrosion protection.

ULTRA HIGH EFFICIENCY HOT WATER SUPPLY BOILERS & SYSTEMS

BOILERONLY

*

BASICPACKAGE

**FLOOR STAND


CONDENSATE MANIFOLD

GAS LINE MANIFOLD

ELECTRIC DISCONNECT

PANEL

COMPLETE SYSTEM

***BTU INPUT

X-FYREXF-300 300,000

MODEL NUMBER

XF-850 850,000X-THERM

ASME & ETL CERTIFIEDMeets Low NOx Requirements

Cascaded Control Included on Multi-Unit Sizes

*** COMPLETE SYSTEM

** BASIC PACKAGE

Includes the basic package items and adds pre-plumbed manifold (standard design), condensate manifold, gas supply manifold (if applicable), electrical service panel, and stand. All pumps and controls are pre-wired. (Custom designed pre-plumbed manifolds are available. Call for quote.)

Includes boiler, primary pump, installation kit, 115 gallon non-ASME storage tank, non-ASME thermal expansion tank, tank thermometer and pressure relief valve.

XT-1005 999,000

Warranty Information2 Years on parts - 10 years on heat exchanger


THERMAL EXPANSION TANK


STORAGE TANK VST 350AAddST 80

DeductST80A

AddST175A

Add

30



HOT WATER SUPPLY - ULTRA HIGH EFFICIENCY

Cascade SystemAvailable *

BTU INPUT CAPACITY (GALLONS PER HOUR)

HighEfficiency


@ 80° FT

@ 70° FT

@ 60° FT

@ 50° FT

XF-300 Yes 300,000 375,000 428 489 570 684

XF-400 Yes 400,000 500,000 570 652 760 912

XF-500 Yes 500,000 625,000 713 815 950 1,140

XF-700 Yes 700,000 875,000 998 1,140 1,331 1,597

XF-850 Yes 850,000 1,062,500 1,212 1,385 1,616 1,939

XT-1005 N/A 999,000 1,248,750 1,424 1,628 1,899 2,279

XT-1505 N/A 1,500,000 1,875,000 2,138 2,444 2,851 3,421

* Cascade System - up to 8 units can be combined. Multi-unit configurations available.

2,850 3,257 3,800 4,560XT-2005 N/A 1,999,000 2,498,750

31


1/6 HP $ 5,452 $ 7,963 $889 $331 $122 $2,867 $ 12,2841/6 HP $ 5,914 $ 8,424 $889 $331 $130 $2,867 $ 12,7451/6 HP $ 6,720 $ 9,230 $894 $368 $163 $2,867 $ 13,6331/6 HP $ 6,889 $ 9,400 $894 $368 $170 $2,867 $ 13,8021/6 HP $ 9,574 $ 12,084 $1,263 $368 $379 $3,500 $ 17,5941/6 HP $ 10,518 $ 13,028 $1,263 $469 $379 $3,500 $ 18,6381/6 HP $ 10,821 $13,332 $1,263 $469 $395 $3,500 $18,9581/6 HP $ 11,998 $14,508 $1,263 $501 $395 $3,500 $20,1671/2 HP $ 14,375 $16,886 $1,263 $501 $413 $4,253 $23,3171/2 HP $ 15,444 $17,955 $1,263 $501 $413 $4,253 $23,9721/2 HP $ 16,574 $19,085 $1,263 $501 N/A $4,253 $25,1023/4 HP $ 18,118 $20,628 $1,411 $501 N/A $4,253 $26,7933/4 HP $ 18,778 $21,288 $1,411 $501 N/A $4,667 $27,867

1-1/2 HP $ 21,202 $23,712 $1,411 $542 N/A $4,667 $30,3311-1/2 HP $ 22,861 $25,371 $1,411 $542 N/A $4,667 $31,9901-1/2 HP $ 26,897 $32,937 $2,419 $542 N/A $5,267 $41,1631-1/2 HP $ 28,803 $35,339 $2,419 $902 N/A $5,267 $43,9271-1/2 HP $ 33,493 $40,030 $2,419 $902 N/A $5,267 $48,617

3 HP $ 37,005 $43,541 $2,419 $902 N/A $5,267 $52,1293 HP $ 39,406 $45,942 $2,419 $999 N/A $5,267 $54,626

-$623 $469 $956 $3,299 $5,713

$1,035 $975 List Price

• Propane Gas Trim (L.P.) $250

• ELECTRONIC OPERATING CONTROLLER $1,850 WITH NIGHT SETBACK & LCD READ OUT

Please specify altitude and gas type when ordering.

STOCK: F.O.B. Belleville, Michigan

+ Low Nox Available - add $450 list to boiler or package prices

IMPORTANT: Check State Boiler Code Requirements on page 5..

OTHER INFORMATION

2 Years on Parts10 Years on heat exchanger

ST175AAdd

OPTIONAL

THERMAL EXPANSION

ST 80Deduct

WARRANTY

VST 350AAdd

WT2-9-182BWT2-18-210B

BTU INPUT

1,467,0001,337,000

627,000726,000WT2-9-72B

Floor Stand Raises boiler 8" - 30" off the floor for corrosion protection and alignment with the storage tank.


Draft Inducer Aids venting of combustion gases and allows for reduction in flue gas pipe through the roof.

Make Up Air

Pre-plumbed Manifold Fabricated with Type K copper, pressure tested to 100 psi for leak free installation and specifically engineered to maximize system flow and efficiency.

Provides combustion make up air in enclosed, un-vented equipment rooms.

1,826,000

MODEL NUMBER

WT2-9-40B +WT2-9-51BWT2-9-62B

WT2-9-18B +WT2-9-26B +WT2-9-33B +

1,630,000WT2-9-163B

2,100,0002,499,0003,000,0003,500,0004,000,000

WT2-18-250B

WT2-18-350BWT2-18-300B

WT2-18-400B

1,125,0001,223,000


WT2-9-133BWT2-9-146B

WT2-9-112BWT2-9-122B

WT2-9-82BWT2-9-96B

BOILER ONLY *

825,000962,000

399,000512,000

181,000264,000334,000


COMPLETE SYSTEM

***

BASICPACKAGE **

DRAFTINDUCER

MAKE-UP AIR FLOOR STAND

* BOILER ONLY

** BASIC PACKAGE

Includes boiler, draft hood, and circulating pump.

Boiler only package with 115 gallon non-ASME storage tank, non-ASME thermal expansion tank, thermometer and pressure relief valve.

TWO STAGE ATMOSPHERICHOT WATER SUPPLY BOILERS



STORAGE TANK ST80AAddST120A

Add

*** COMPLETE SYSTEM

Includes the basic package and adds a standard design pre-plumbed manifold, draft inducer, combustion make up air and floor stand (on some models).

hsv

32



HOT WATER SUPPLY - ATMOSPHERICCAPACITY (GALLONS PER HOUR)

181,000

@ 60° FT

@ 50° FT


@ 80° FT

217 248 290 348

@ 70° FT

535 642334,000317 362 423 507264,000

399,000WT2-9-40B401 458479 547 639 766

820 983512,000WT2-9-51B627,000WT2-9-62B

615 702753 860 1,004 1,204

1,162 1,394726,000WT2-9-72B825,000WT2-9-82B

872 996990 1,132 1,321 1,585

1,540 1,848962,000WT2-9-96B1,125,000WT2-9-112B

1,155 1,3201,351 1,543 1,801 2,161

1,958 2,3491,223,000WT2-9-122B1,337,000WT2-9-133B 2,568

2,348 2,818

1,468 1,6781,605 1,834

1,630,000WT2-9-163B

2,140

2,609 3,131

WT2-9-18BWT2-9-26BWT2-9-33B

1,761 2,0131,957 2,236

1,467,000WT2-9-146B

WT2-9-182BWT2-18-210BWT2-18-250BWT2-18-300BWT2-18-350BWT2-18-400B

2,192

3,000

4,202

1,826,0002,100,0002,499,0003,000,000

2,505 2,923 3,5072,521 2,881 3,361 4,034

3,429 4,000 4,8003,601 4,116 4,802 5,762

6,7234,802 5,488 6,403 7,683

3,500,0004,000,000

4,802 5,602

33


In Out Model / Inches List Price List PriceWT2-9-13B 136 34 68 EF 6 6" $ 331 PAI-4 8" $ 1,828WT2-9-18B 186 47 92 EF 6 6" $ 331 PAI-4 8" $ 1,828WT2-9-26B 264 66 132 EF 6 6" $ 331 PAI-4 8" $ 1,828WT2-9-33B 333 84 168 EF 8 8" $ 368 PAI-4 8" $ 1,828WT2-9-40B 399 100 200 EF 8 8" $ 368 PAI-4 8" $ 1,828WT2-9-51B 512 128 256 EF 8 8" $ 368 PAI-6 10" $ 2,865WT2-9-62B 627 157 314 EF 10 10" $ 469 PAI-6 10" $ 2,865WT2-9-72B 726 182 363 EF 10 10" $ 469 PAI-6 10" $ 2,865WT2-9-82B 825 207 413 EF 12 12" $ 501 PAI-6 10" $ 2,865WT2-9-96B 962 241 481 EF 12 12" $ 501 PAI-6 10" $ 2,865WT2-9-112B 1,125 282 563 EF 12 12" $ 501 PAI-6 10" $ 2,865WT2-9-122B 1,223 306 612 EF 12 12" $ 501 PAI-6 10" $ 2,865WT2-9-133B 1,337 335 668 EF 12 12" $ 501 PAI-7 12" $ 3,892WT2-9-146B 1,467 367 774 EF 12 12" $ 501 PAI-7 12" $ 3,892WT2-9-163B 1,630 408 815 EF 14 14" $ 542 PAI-7 12" $ 3,892WT2-9-182B 1,826 457 913 EF 14 14" $ 542 PAI-7 12" $ 3,892WT2-18-210B 2,100 525 1,050 EF 14 14" $ 542 PAI-7 12" $ 3,892WT2-18-250B 2,499 625 1,250 (2) EF 12 12" $ 902 (2) PAI-7 12" $ 7,415WT2-18-300B 3,000 750 1,500 (2) EF 12 12" $ 902 (2) PAI-7 12" $ 7,415WT2-18-350B 3,500 875 1,750 (2) EF 12 12" $ 902 (2) PAI-7 12" $ 7,415WT2-18-400B 4,000 1,000 2,000 (2) EF 14 14" $ 999 (2) PAI-7 12" $ 7,415

Model List Price Model List PriceWT2-9-13B 6" 4" DJ-3 $695 6" 4" HSUL-1 $ 1,137WT2-9-18B 6" 4" 008757 $889 6" 4" 008757 $ 889WT2-9-26B 7" 4" 008757 $889 7" 4" 008757 $ 889WT2-9-33B 8" 4" 008758 $894 8" 4" 008758 $ 894WT2-9-40B 9" 4" 008758 $894 9" 4" 008758 $ 894WT2-9-51B 10" 8" I $1,263 10" 8" HSUL-2 $ 1,377WT2-9-62B 12" 8" I $1,263 12" 8" HS-3 $ 2,327WT2-9-72B 12" 8" I $1,263 12" 8" HS-4 $ 2,811WT2-9-82B 14" 8" I $1,263 14" 8" HS-4 $ 2,811WT2-9-96B 14" 10" I $1,263 14" 10" HS-4 $ 2,811WT2-9-112B 16" 10" I $1,263 16" 10" HS-4 $ 2,811WT2-9-122B 16" 10" I $1,263 16" 10" HS-5 $ 3,608WT2-9-133B 18" 10" IL $1,411 18" 10" HS-5 $ 3,608WT2-9-146B 18" 10" IL $1,411 18" 10" HS-5 $ 3,608WT2-9-163B 18" 10" IL $1,411 18" 10" HS-5 $ 3,608WT2-9-182B 20" 10" IL $1,411 20" 10" HS-5 * $ 3,608WT2-18-210B 24" 16" XL $2,419 24" 16"WT2-18-250B 26" 16" XL $2,419 26" 16"WT2-18-300B 28" 16" XL $2,419 28" 16"WT2-18-350B 30" 16" XL $2,419 30" 16"WT2-18-400B 32" 16" XL $2,419 32" 16"

LIST PRICE SHEETMake-up Air Requirements

BoilerModel Number

Duct Fan

VentReduces To

BoilerModel Number Vent Size

VentReduces

To

Draft Inducer

Side Wall Vent Kits

Square InchesFree Air Required CFMRequired

Draft Inducer Sizing Guide

N/AN/A

* Maximum Up To 25' of Vent

Enforcer

Model / Inches

N/AN/AN/A

BoilerVent Size

Side Wall Vent

34


Model Number Storage Capacity Approx. Weight List Price

ST-80 80 Gallons 222 lbs. $ 1,589ST-120 115 Gallons 262 lbs. $ 2,243

Model Number Storage Capacity Approx. Weight List Price

ST-80A 80 Gallons 262 lbs. $ 2,736ST-120A 115 Gallons 335 lbs. $ 3,247ST-175A 175 Gallons 600 lbs. $ 5,707ST-200A 200 Gallons 700 lbs. $ 6,732

Model Number Storage Capacity Construction Dimensions Approx. Weight List Price

VST30 220 Gallons Glass lined 30" x 72" 406 lbs. $ 6,549VST36 350 Gallons Glass lined 36" x 87" 653 lbs. $ 7,849VST42 504 Gallons Glass lined 42" x 88" 885 lbs. $ 10,021VST48 752 Gallons Glass lined 48" x 100" 1,440 lbs. $ 16,974VST4812 940 Gallons Glass lined 48" x 124" 1,760 lbs. $ 18,701

NOTE:Huron Valley Sales recommends that a Thermal Expansion Tank be added to any of the abovestorage tank options - required on all closed tank applications. Non code and ASME codeexpansion tanks are available.

Model Gallons List Price Model Gallons List Price

WH-8 2.1 $ 67 FTTA-5 5 $ 1,106

WH-18 4.5 $ 70 FTTA-12 12 $ 1,276

WH-32 8.5 $ 301

LIST PRICE SHEET

125 PSI - 5 YEAR WARRANTY

ASME APPROVED - UNINSULATED 32" x 77-1/4"

Dimensions

26-1/2" x 58-5/8" 28-1/4" x 59-1/4"

150 PSI - 5 YEAR WARRANTYDimensions

HOT WATER STORAGE TANKSNON-ASME - FOAM INSULATED - WITH METAL JACKET

NON-CODE ASME-CODE

32-1/4" x 67-1/4"

125 PSI - HANDHOLE CLEANOUT - WARRANTY - GLASS LINED - 3 YEARS STAINLESS - 10 YEARS

ASME CODE - INSULATED - WITH METAL JACKET

Other sizes available as special order.

THERMAL EXPANSION TANKSFOR HOT WATER SUPPLY

24" x 58"26-1/2" x 59-5/8"

35


RUUDGLAS GLASSLINED ENERGY MISER MODELS - 3 YEAR LIMITED WARRANTYGallon Input 100ºF Rise Vent Approx. List

Model Capacity BTU/Hr Gal/Hr * Size Ship Weight Price G 75-75 75 75,000 69 4" 320 lbs. $ 2,873 G 100-75 100 75,000 69 4" 360 lbs. $ 3,912 G 50-98 50 98,000 95 5" 268 lbs. $ 6,096 G 75-125 75 125,000 121 5" 480 lbs. $ 5,423 G 82-156 82 156,000 151 6" 490 lbs. $ 6,732 G 76-180 76 180,000 175 6" 540 lbs. $ 8,143 G 37-200 37 199,900 194 6" 450 lbs. $ 8,020 G 76-200 (see note 4) 76 199,900 194 6" 540 lbs. $ 5,073 G 91-200 (see note 4) 91 199,900 194 6" 600 lbs. $ 5,126 G 100-200 (see note 4) 100 199,900 194 6" 780 lbs. $ 5,047 G 100-200A (ASME) 100 199,900 194 6" 820 lbs. $ 10,763 G 72-250 72 250,000 242 6" 590 lbs. $ 8,762 G 72-250A (ASME) 72 250,000 242 6" 630 lbs. $ 10,943 G 100-250 100 250,000 242 6" 795 lbs. $ 8,744 G 100-250A (ASME) 100 250,000 242 6" 835 lbs. $ 11,544 G 100-270 100 270,000 262 6" 805 lbs. $ 9,626 G 100-270A (ASME) 100 270,000 262 6" 845 lbs. $ 11,835 G 72-300 72 300,000 291 8" 590 lbs. $ 9,765 G 72-300A (ASME) 72 300,000 291 8" 630 lbs. $ 11,915 G100-310 100 310,000 301 7" 770 lbs. $ 9,813 G100-310A (ASME) 100 310,000 301 7" 810 lbs. $ 12,041 G 65-360 65 360,000 349 8" 640 lbs. $ 11,125 G 65-360A (ASME) 65 360,000 349 8" 680 lbs. $ 13,184 G 65-400 65 399,900 388 8" 640 lbs. $ 12,441 G 65-400A (ASME) 65 399,900 388 8" 680 lbs. $ 14,655 G 85-400 85 399,900 388 10" 640 lbs. $ 13,450 G 85-400A (ASME) 85 399,900 388 10" 680 lbs. $ 15,357 G 100-400 100 399,900 388 8" 770 lbs. $ 13,905 G 100-400A (ASME) 100 399,900 388 8" 810 lbs. $ 13,427

NOTES: Thermal Expansion Tanks 1. Propane Gas (LP) System: Add $250 List. $ 67 2. Includes T&P Relief Valve . $ 70 3. Ship Full Freight Allowed direct from factory except as noted $ 301 4. Non-ASME models G76-200, G91-200, G100-200 $ 1,106 ship FOB Belleville, MI $ 1,276

IMPORTANT: Check State Boiler Code Requirements on page 6.

WH-18WH-32

TTA-5 (ASME)TTA-12 (ASME)

RUUD COMMERCIAL GAS WATER HEATERSSTORAGE MODELS

LIST PRICE SHEET

WH-8

36


95% THERMAL EFFICIENCY MODELS - 3 YEAR LIMITED WARRANTYGallon Input 100ºF Rise Vent Approx. List

Model Capacity BTU/Hr Gal/Hr * Size Ship Weight PriceGHE80-130 80 130,000 153 2,3,4 725 $ 8,195GHE80-130A 80 130,000 153 2,3,4 755 $ 9,920GHE80-150 80 150,000 173 2,3,4 725 $ 8,550GHE80-150A 80 150,000 173 2,3,4 755 $ 10,175GHE80-

2014 v1 price catalog de-icing cover-p9 · 2020. 1. 22. · our regularly stated terms: equipment:...

Documents