2014 mercedes-benz and bmw engine timing tool set
DESCRIPTION
Taiwan Auto Tools supplies a complete range of repair tools: pneumatic tools for repair process, air impact wrenches, digital torque wrenches, gear wrenches, as well as special tools for BMW and Mercedes Benz , VW and Audi: engine system, suspension system, brake system, air condition, vehicle diagnoses system, and body repair.TRANSCRIPT
No.: TATHT8801
No.: TATHT8804
No.: TATHT8807
No.: TATHT8802
No.: TATHT8805
No.: TATHT8808
No.: TATHT8803
No.: TATHT8806
No.: TATHT8809
Mercedes-Benz M270 Engine Timing Tool Set
Mercedes-Benz M276 Engine Timing Tool Set
BMW N13, N18 Engine Timing Tool Set
Mercedes-Benz M651 Engine Timing Tool Set
BMW S54 Engine Timing Tool Set
BMW N20, N55 Valve Pressure Spring Installer and Remover
Mercedes-Benz M275 Alignment Tools Set
BMW N20 Engine Timing Tool Set
BMW N55 Fuel Injector Install and Remove Tool
y Special designed to position the camshaft in TDC position.
y Applications: 1.6L, V4 engine, A class and B class. y OEM Number: 270 589 00 61 00
y Special designed to align the camshaft timing angle for correct posistion.
y Applicable: BENZ M157, M276, M278 engine y OEM Number: 27658901400
y Designed for fixing the camshaft in TDC position. y Use the tool to dismantle and assemble intake and exhaust camshaft.
y Applicable: BMW N13, N18 engine y OEM Number: 117440, 119340, 496709, 119590
y The retaining device makes it possible to position the camshafts in the installed position.
y Also for turning, installing, and removing the crankshaft pulley.
y Applicable: BENZ M651 engine (07~) y OEM Number: 651589014000, 651589004000
y For checking and setting camshaft timing when installing VANOS adjustment unit on S54 engines.
y OEM Number: 119140, 119130, 119170, 117340, 115100, 117160, 112300
y Applicable: M3 Cabriolet (00~06), Sports Coupe (99~06), CSL Sports Coupe (03~04).
y Special designed to remove and install the pressure spring on intermediate lever.
y Applicable: BMW N20, N26, N55 y OEM Number: 117110
y This retaining device is designed for positioning the camshaft in 30 degree TDC position.
y M275, M285: The set A only used for left bank of cylinder and set B and C used for right bank.
y M137: Use the set B and C to loosen and tighten mounting screws for the camshaft sprocket and adjusting the timing.
y Designed for fixing the camshaft in TDC position. y Use the tool to dismantle and assemble intake and exhaust camshaft.
y Applicable: BMW N20, N26 engine y OEM Number: 83 30 2 212 831, 83 30 2 212 830, 83 30 2 219 548, 119340
y Special designed to install and remove the injector in N55 engine.
y Applicable: BMW N55 engine
Automotive Special Tools - 2014.06Mercedes-Benz and BMW Engine Timing Tool Set
Taiwan Foremost Hardware Industrial Co. Ltd,[email protected]
TEL: +886 2 8712 0039FAX: +886 2 8712 3016
www,taiwanautotools.com