2014 download product catalogue

[email protected]

Head OfficeTel.: +968 2450 3915 Fax: +968 2450 3920

PO Box: 1827, P.C. 130, Al Athaibah, Sultanate Of Oman

Salalah ShowroomTel.: 968 2313 2915 Fax: +968 2313 2915

Shop No. 13 & 14, Near Al Mawasa ClinicSenaiyya, Salalah, Sultanate of Oman

Electrical

Instrumentation

Oil & GasLighting

2014CATALOGUE

2014 CA

TALO

GUEMechanical

ww

w.tecsintl.com

Sohar ShowroomTel.: +968 2675 3006 Fax: +968 2675 3007

PO Box: 505, P.C. 322, Falaj Al QabailSohar, Sultanate of Oman

02

To build market shares by diversifying in the areas of Electrical, Lighting, Instrum-entation, Mechanical and Oil & Gas products that cater to industries and localbusinesses and provide clients with cost effective solutions for all their productneeds.

5

ISO 9001:2008 CertificateQuality Policy

03

Technical Supplies International Company LLC (TECS) aims atdiversifying its business in the areas of Electrical, Instrumentation,Lighting, Mechanical (Utilities) and Oil & Gas (Mechanical)products that cater to industries and business, within theSultanate of Oman & across Middle East

Electrical Division

Electrical ProductsCable Support SystemsGI Conduits & AccessoriesFlexible ConduitsCables & WiresCable Lugs & GlandsCable TiesLow Voltage Control & Switchgear PanelLV Switchgear ComponentsMotors & VFDsAC UPS & Battery ChargersEarthing & Lightning Protection SystemsElectrical Plugs & SocketExplosion Proof ProductsElectrical Safety Products

04

0509101214151619232426283034

Page No.

Cable Support Systems

05

GRP

GRP

Cable Tray & Accessories

Cable Ladder & Accessories

06



07


08

GI Conduits & Accessories

09

Conduits

Pre Galvanized

Hot Dipped Galvanized

Size 20mm to 40mm

Accessories

1, 2, 3 & 4 Way Round Junction Boxes

Saddles

GI Square Boxes

Short & long Nipples

Ball Sockets

End Plugs

Flexible Conduits

10

Flexible Conduits

11

F

F

Cables and Wires

BSEN 50525-2-31

300

PVCwires

As

12

/ BS 6328

/ Heat Reistance Cables

Cables and Wires

High Temp

Size: 1.5 sqmm to 630 sqmm

13

Rubber Flexible Cable

Instrumentation Control & Data Cables

sq mmsq mm 185

/OES-II3.3/11/33/66 kv

132/220/400 kv

Marine & VFD Cables

Cable Lugs and Glands

1. Cable Glands: Safe Area & Ex-Proof Type

2. Copper Cable Lugs

d Material: PVC, Brass, Nickel Plated Brass, Stainless Steel

14

Cable Ties

15

Generator Control / Synchronising /AMF Panels: Applications: To Controll Generator Operation / To synchronize multiple Generator sets onto a common bus / To provide automatic changeover between two or more electrical sources.

Panel assemblies in conformance with requirements of IEC 61439-1 & 2 for LV Switchgear Assemblies

Street Lighting PanelsApplications: Automatic switching ofstreet lighting.

Main Distribution Boards (MDB's)

Applications: Protection of whole Low Voltage Electrical Power Networks connected to a power source.

Panel assemblies in conformance with requirements of IEC 61439 - 1&2 for LV Switchgear Assemblies.

Authorized Panel Builders of ABB for current rating upto 4000A

Sub Main Distribution Boards (SMDB's)

Applications: Protection of Low Voltage Electrical Power Networks downstreamfrom Main LV Panels


Low Voltage Control & Switchgear Panel

16


Automatic Power Factor CorrectionPanels (Capacitor Panels) :

Applications: Improvement of power

networks to Eliminate wastage in Electricity Consumption.

Final Distribution Boards (FDB's)

Applications: Final Distribution of Electrical Power to various loads in Consumers premises.

17

Motor Control Centre - Fixed and Drawout Type

Applications:Control of Motors through various methods.


Feeder PillarsApplications: Distribution of ElectricalPower to Consumers by Utilities.

Metering PanelsApplications: Tari Metering of ElectricalPower to Consumers.


18

LV Switchgear Components

ABB Air Circuit BreakerType : Emax E1 to E6Operating Voltage : up to 690V ACCurrent Rating : 250A to 6300ANo. of Poles : 3 & 4Breaking Capacity : 42 kA 150 kA at 415VVersion : Fixed & WithdrawableProtection release : Microprocessor-basedrelease offering protection, measurement andcommunication functions.

ABB- MCCB Formula Series up to 630AType : Formula Series A1 to A3Operating Voltage : up to 690V ACCurrent Rating : 16 A to 630ANo. of Poles : 1, 2, 3 & 4Breaking Capacity : 10 kA 50 kA at 415VVersion : Fixed Type

ABB MCCB TmaxType : Tmax T1 to T7, Formula Series up to 630AOperating Voltage : up to 690V ACCurrent Rating : 16A to 6300ANo. of Poles : 3 & 4Breaking Capacity : 16 kA 150 kA at 415VVersion : Fixed & AdjustableProtection release : Microprocessor-based releaseoffering protection, measurement andcommunication functions.

ABB-Contactors (Block, Mini & Bar Mounted)AC Operated 3P 9A 300A AC3 Rating.AC/DC Operated 400A 1050A AC3 rating.AC Operated 4P 25A 1000A AC1 Rating.AC/DC Operated 2050A AC1 Rating.Mini Contactor Low Switching burden in bothPower and Auxiliary.Bar Mounted Contactors from 63A to 4000A in2, 3 and 4 Pole.Accessories for all above.

19


ABB- Thermal Overload Relay, Electronic Product & Relay

Thermal Overload Relays 0.16A 400A

Electronic Overload relays 0.16A 1250A

Electronic Timers

Measuring & Monitoring Relays

Switching Power Supplies

Safety Relays

Pluggable Relays

Analog Signal & Serial Data Converters

Special Terminal Blocks

Accessories for all the above

ABB Switch Fuse Unit, Change Over Switch &Switch Disconnector

Front Operated Switch Fuse Units

No. of Poles : 3 & 4

BS & DIN versions

SFU Current Rating : 32A - 1600A

Switch Dis-connector rating from 16A - 3150A AC23 rating.


Changeover Switch current rating from 16A 1600A


Accessories for all the above

ABB Manual Motor Starter, DOL and Star Delta Starter

MMS current rating from 16A to 3150A AC23 duty.

No. of poles : 3 & 4

DOL Starter up to 10 HP

Start Delta Starter up to 250 HP in sheet steel enclosure.

Wide Band Coil to take care of voltage fluctuation.

Accessories for all the above.

20


ABB Soft StarterType : PSS, PSR PSE, & PST (B)Operating Voltage : up to 690V ACCurrent Rating : 3A to 1810A Protection release : Microprocessor-based, AdvancedIntegrated Protection,Flexible bus Communication system,LCD Display, Programmable signal relays, Torque Control,option with bypass contactor.

ABB - Line Protection DeviceMain product lines:Miniature circuit breakers (MCBs)Residual current devices (RCDs), RCCBs, RCBOsSurge Protection Devices, IsolatorTimers, Twilight Switches, Photo Sensors.Modular DIN-rail componentsAccessories for connection and Installation

21


BW Series PVC Enclosure, IP65 from 16A to 125A, SPN, TP+N & 4POT Series Sheet Steel Enclosure, IP65 from 16A to 1600A, TP+N & 4P

ABB Weather Proof Isolator

ABB Distribution Board 4Way, 6Way, 12 Way

22

Motor & Drive Systems

Inverters That are Friendly toBoth Power Sources and Motors

MV Inverter up to 11kv

Motors

The MV Inverter can be appliedto existing high voltage motors atvariable speeds

Motors can cater to every need, includingultra-large capacity motors in the 100,000kWclass and ultra-speed motors of morethan 10,000 rpm

A broad lineup 3.3kV: 200 - 5700kVA 6.6kV:400~11400kVA (the highest class in the industry) 11kV: 660~19500kVA

Control methods can be chosen for uses to best fit the applications Sensor-less control for energy-saving uses, such as for fans and pumps, Vector control for constant torque loads, such as extrusion machines and kilns

Three-phase squirrel cage induction motor250~900 frames37 kW ~ 20,000 kW

23

AC UPS and Battery Chargers


MTI - UPS Systems

The products deploy advanced power electronics technology and provide an output range from 5 KVA to 650 KVA (parallel redundancy). The UPS systems are designed and manufactured to meet specialized applications and to ensure reliable protection of critical loads in hospitals, utilities, telecom and other applications.

In addition to our range of Standard UPS systems, MTI Systems designs, develops and manufactures customized equipment (rectifiers, inverters, UPSs) in partnership with Astrid according to the customers specification. These products are commonly used in power plants, petrochemical plants, oil & Gas Industries & offshore platforms

Battery Chargers

MTI Systems industrial battery chargers offer a 30 year design and incorporate digital and power electronics technologies for added efficiency and reliability. The unique SCR rectifier with a doubly wound isolation transformer provides regulated DC output and current limiting capabilities. Multi output-filtering configurations are available to match the powering requirements

Battery & Battery Racks

1. NI-CD Batteries - Clear Case The impact-resistant clear case allows the user to easily monitor plate conditions and electrolyte levels. High performance pocket plate type alkaline storage battery 25 year field-proven design No emission of corrosive fumes Strong impact-resistant clear case protects against shocks and vibrations Wide operating temperature range from 25C to +50C

24


2. Translucent Case Batteries

High Performance Nickel Cadmium storage battery Three battery ranges designed for different discharge range: - KH/P Range (High) 1 sec90 min - KM/P Range (Medium) 5 min5 hours - KL/P Range (Long) 110 hours 20 years field-proven design Built in accordance with IEC 60 623, EN60 623, and DIN 40 771

3. Lead Acid Batteries

The OPzS Stationary Lead Acid Batteries are designed to provide battery power for deep cycling applications in telecommunication, utility, communication and transpor-tation industries. Due to the extremely low levels of self-discharge, they are also suitable for photovoltaic applications.

Capacity range: - 12 volt blocks: 50 to 150 Ah - 6 volt blocks: 200 to 300 Ah - 2 volt cells: 100 to 3000 Ah - 3 Year full warrant

4. VRLA Batteries

MTI Systems offers several types of Valve Regulated (Sealed) Type Lead Acid Batteries:> GT High Rate Series> GT Modular Low Rate Series> GT Modular Series> GT Front Access Series

5. Battery racks with different sizes

25

Earthing & Lightning Protection Systems

Tinned Copperd

Air Terminal Rod

Copper Tape - 25x3 mm, 50x6 mm, 25x6 mm, 50x3 mm

Copper Bonded Earth Rod & Acc.

26

ClipsClamps

ClampsMarconite Bentonite

Surge Protection DeviceWith Furse we offer a full range of Electrical Surge Protection solutions to protect your critical mission equipment fromtransient overvoltages. All Furse ESP products are designed to provide simple system integration whilst achievinghighest levels of effective protection against transients.

a) Main Power Suppliesb) Data & Signal Linesc) Phone lines & Computer Network

Accessories

Spike

d

Solid Copper Earth Rod & Accessories

Earth Pit

Earthing & Lightning Protection Systems

27

Electrical Plugs and Socket

28

Electrical Plugs and Socket

29

Explosion Proof Products

Explosion Proof Light Fittings

30

LED Floodlight

LED High Bay LED High Bay LuminaireLED High Bay Fixture

LED Area Light

LED Bulkhead Fixture LED Area Light

LED Street Light - CE Approved


Explosion Proof Light Fittings

31

LED Bulkhead FixtureStainless Steel LED Linear

Luminaire

LED Wallpack / Bulkhead Fixture

LED High Bay


32


Glass Reinforced Polyester

Copper Free AluminiumGlass Reinforced Polyester

Plugs & Sockets

33

Material Construction

Electrical Safety Products

Locking & Signalling LV Test & Measurement LV Earthing System Personal and Collective Protection Equipment

Live Working Tools LV MV Substation Equipment Medium Voltage Equipment

Earthing Connections Tension Equipment Ex Proof Safety Equipment Short Cireuit Earthing Leads

34

PROTECTION AGAINST ARC FLASH

The following are used to determine the proper equipment for protecting against anelectric arc:

The maximum fault current value. The phase/ground rated voltage at the site of the risk. The distance between the source of the arc and the reception surface. The AC cycle number and the mono or three-phase circuit type. The location where the arc is produced (confined space).

After recording these parameters, we can estimate the level of risk and determinethe proper protective clothing and PPE to use: 8 to 100 cal/cm2 or class 1 or 2.

For more information, please contact our technical department.


35

Arc Flash Protection

- The arc's main manifestation is its thermal effect. The heat energy released, whichis proportional to the voltage, intensity, and fault length, can be considerable(19,000C), melting the metal and charring the insulation.

- Blast effect, caused by the very rapid release of energy in a limited volume of air(similar to an explosion).

- Light effect with high ultraviolet and infrared radiation.- Ionisation effect that can trigger an arc on nearby active sections.

In addition to these effects, particles may be projected, and the metal may melt.

When electric arc danger exists, heat-resistant clothing must be worn.The arc's characteristics are given by: The resistance value of the free arc, expressed in cal/cm2 according to NFPA

70 E, ASTM standards, and IEC 61482-1-1.or The protection class (1 or 2) with a constrained arc according to IEC 61482-1-2.

The "Arc Flash" phenomenon.

UV and IR radiation.

Arcflash.

Fragments, droplets,and molten metal.

Plasmaball.

Fire-retardant clothing in case of exposure to an electric arc, confirmingto IEC 61482-2 and the regulationNFPA 70E.

An electric arc follows a short circuit. It produces nearly instant effects with seriousconsequences without proper protection.


36

Arc Flash Equipment

"Arc flash" protective kits (25, 40, 55, 65 or 100 cal/cm2)

KIT-ARC-40/55-B-(*)KIT-ARC-25-B-(*) KIT-ARC-65/100-B-(*)

Reference

KIT-ARC-25-B-(*) *1

KIT-ARC-40-B-(*) *2

KIT-ARC-55-B-(*) *3

KIT-ARC-65-B-(*) *4

KIT-ARC-100-B-(*) *5

Capacity cal/cm2

25 cal/cm2

40 cal/cm2

55 cal/cm2

65 cal/cm2

100 cal/cm2

6 000

6 900

8 000

8 000

8 000

KAKI

GREY

GREY

CAMEL

CAMEL

g

MO-182/1-B

MO-11000

M-87384

M-87295

(*) Reference to be completed by the size M, L or XL.Size S to 3 XL on request.

*1 For reference KIT-ARC-25-B-(*), kaki outfit.*2 For reference KIT-ARC-40-B-(*), grey outfit.*3 For reference KIT-ARC-55-B-(*), grey outfit.*4 For reference KIT-ARC-65-B-(*), brown/camel outfit.*5 For reference KIT-ARC-100-B-(*), brown/camel outfit.

Composition

M-881968 *1M-881961 *2M-881973 *3M-881976 *4M-881979 *5

1 arc flash protective hood with an integrated

face shield 25 *1, 40 *2, 55 *3, 65 *4 or

100 *5 cal/cm2,

ASTM F2178 and NFPA 70E Standards

1 ABS helmet electrically insulated

EN397, EN 50365, ANSI Z89.1 20kV.

1 safety glasses EN 166/EN 170

1 carrying bag for face shield and helmet

1 all kit carrying bag

1 arc flash protective bib overall 25 *1, 40 *2,

55 *3, 65 *4 or 100 *5 cal/cm2,

ASTM F1506

and NFPA 70E Standards

1 arc flash protective coat 25 *1, 40 *2, 55 *3,

65 *4 or 100 *5 cal/cm2,

ASTM F1506 and NFPA 70E Standards

Color

M-87295Carrying bag forthe kit.

M-881961Arc Flash protective hoodwith face shield, 40 cal/cm2.

MO-182/1-BElectrician helmet.

MO-11000Safetyglasses.

Arc Flash Dungarees,40 cal/cm2.

Arc Flash Jacket, 40 cal/cm2.


37

MV Substation Equipment

Close

Life saving kits

Wall mounted kit.

In case of an electrical accident, quick response is essential:seconds gained or lost can decide the life or death of a victim.Our life saving equipment is designed to make all necessarymaterials immediately available to rescue personnel.

Life saving kits for M.V. substations

Open

Insulated cable cutter

Maxi cable : 26 mm.Section 150 mm2.

CZ-60 0.630 2 200

Reference gm

Reference Characteristics

CZ-54-R

CZ-54-RM

CZ-55-R

CZ-55-RM

With instructionsin English

With instructions in English/ArabicWith instructions

in EnglishWith instructions in

English/Arabic

21 000

21 000

21 000

21 000

g

840 x 754 x 270

840 x 754 x 270

840 x 754 x 270

840 x 754 x 270

mm

24 kV

24 kV

36 kV

36 kV

Insulated handles25 kV.

Safety instructions on theplastic board.

Voltage detector with flexible antennacontact (with autotest).

Rescue telescopicstick.

Insulating platform24 or 36 kV.

Cable cutter with insulatedhandles. Forged steelblades. Maximum opening30 mm.

Wall mountedcabinet.

Insulatingboots.

High voltage Insulating gloves,insulating boots and talcumpowder can.

Insulating platform.

Telescopic insulatingstick.

Voltage detector with autotest.Rescue hook.

Insulated cutter cable.

Pair of insulatinggloves.

Talcum powder can.

Adhesive tape(black and yellow).

Safety instructions and safetyfirst aid posters.

Pair of insulatingboots.


38


Extra safety equipment and life saving kits

For sticks and voltage detectors. Plastic.

Wall mounted supports

CI-06-D

CI-08

CI-10-D

28-30

16-20

32-36

Reference mmTop

36 max.

36 max.

58 max.

mm

Bottom

Delivered with wood screws.

Top Bottom

Rescue hook

* Delivered with small mounted supports and 4 screws.

Reference Characteristics

CS-01-C Adaptor C 350

g

345 x 335

mm

On stick equippedwith a "C" end-fitting.

Compact carrying KIT

This compact kit is designed especially to be carried in a vehicle forsafety electrical intervention.Made in two part (of moulded material: PEHD), the case is also on itsred part, an insulating platform.

Reference Characteristics with instructions in English

CZ-53-R

CZ-53-MR

CZ-53-R/2

CZ-53-MR/2

With instructions in English

With instructions in English/Arabic

With instructions in English

With instructions in English/Arabic

21 000

21 000

21 000

21 000

g

710 x 570 x 240

710 x 570 x 240

710 x 570 x 240

710 x 570 x 240

mm

25 kV

25 kV

36 kV

36 kV


39


Insulating boots and mats

Insulating boots

Reference

(*) Add sizes: 39, 40/41, 42, 43, 44, 45, 46/47, 48, 49/50.Example: MV-135-40/41.

MV-135-(*)

MV-134-(*)

Voltage

20 000 V

1 000 V

Standards

ISO EN 20345ISO EN 20347

EN 50321 - Classe 0EN 13287

ISO EN 20345ISO EN 20347

Protection against step and touch hazardous potential gradients.

Made from high qualitydielectrical rubber, veryflexible and resistant.

Anti-perforation compositesole and shell. Anti-slipsole. EN 13287.

Safety tip in technicalpolymer.

External height370 mm.

MV-135MV-134

Insulating matsIndividual models

VoltageThickness

mm

MP-42/11

MP-42/16

MP-42/66

3

3

3

26.5 kV

26.5 kV

26.5 kV

1 000 x 1 000

600 x 1 000

600 x 600

4 500

2 900

1 800

gmm

3

3

3

For placing in front of panels

VoltageThickness

mm

MP-60/03-5

MP-60/03-10

MP-100/03-5

MP-100/03-10

MP-60/05-5

MP-60/05-10

MP-100/05-5

MP-100/05-10

3

3

3

3

4

4

4

4

26.5 kV

26.5 kV

26.5 kV

26.5 kV

36 kV

36 kV

36 kV

36 kV

600 x 5 000

600 x 10 000

1 000 x 5 000

1 000 x 10 000

600 x 5 000

600 x 10 000

1 000 x 5 000

1 000 x 10 000

14 000

28 000

25 000

53 500

28 000

44 000

45 000

89 000

gmm

3

3

3

3

5

5

5

5

High quality dielectricalrubber.

Regulatory markclearly indicatingthe mat features.

High qualitydielectricalrubber.

IEC 61111EN 61111

Non-skid surface.

Non-skid surface.

Reference Class

Reference Class

Insulating mats

Adapted to High Voltage.

Reference

MP-100/10-5

MP-100/10-10

1 000 x 5 000

1 000 x 10 000

87 000

154 000

gmm

10

10

Contact us for any particular application.

Thickness mm


40


Equipment for working on pole: insulating ladders

Insulating ladders

Reference Numbers of rungs

MP-602-D

MP-603-D

MP-604-D

MP-605-D

2.41 m

2.97 m

4.09 m

4.93 m

8

10

14

17

Simple ladders

A complete range with top quality features: Insulationbetween two steps: 30,000 V (test performed afterimmersion in water for 24 hours). High mechanicalresistance to bending and twisting.Good resistance/weight ratio. High fire resistance.High resistance against bad weather and corrosiveelements.

Lateral risers in polyester/glass fiber rectangular section70 x 25 mm. Aluminium alloyrungs with square.

29 x 29 mm sectionand anti-slip coating.

EN 131

EN 131

Reference Folded DeployedNumbersof rungs

MP-514/2

MP-515/2R

2.41 m

2.97 m

4.09 m

5.21 m

2 x 8

2 x 10

13 900

17 000

2 sections extension ladders, hand operated

Reference Numbers of rungs

MP-634/2-D 2.70 / 4.66 m 9 + 9

2 sections extention ladders

Ladders come with cradle, strap and front wheels.

g

Reference Folded DeployedNumbersof rungs

MP-506/2

MP-508/2

MP-509/2

MP-510/2

3.53 m

4.66 m

5.22 m

5.78 m

6.05 m

8.30 m

9.14 m

10.26 m

2 x 12

2 x 16

2 x 18

2 x 20

22 900

35 400

39 300

43 000

2 sections extension ladders, rope and pulley operated

g

Lateral risers in polyester/glass fiber rectangularsection 70 x 25 mm. Alu-minium alloy rungs withsquare

06-PMD-2/436-PM

2/605-PM2/415-PM

Wheels.

Wheels+ cradle.

29 x 29 mm sectionand anti-slip coating.

Instrumentation Division

Instrumentation ProductsLevel and Pressure Measurement EquipmentsFlow Measurement EquipmentsTemperature Measurement EquipmentsAnalyzer SystemsFlow Metering SystemsFire & Gas Detection EquipmentsCalibration EquipmentspH and Conductivity MeasurementControl and Automation Units

41

424344454748505253

Page No.

Level and Pressure Measurement Equipment

42

Flow Measurement Equipments

Multi-point Thermocouple Restriction Orfice Plate

TM Tecnomatic SPA has been a leading manufacturer of flow measurement devices for more than48 years. TM began its activities in 1962 in the town of Cremona, located in Italys notherenindustrial area. TM Tecnomatic manufacture Orifice Plates, Restriction orifice plates, Venturi Tubes,Flow Nozzles, Multistage Restriction Orifices, Pitot tubes, Annubar & Venturi Cone Meters

V-Cone Flow Meter Venturi Meter

Venturi Meter - Flanged

43

Temperature Measurement Equipments

Thermocouples / Thermowell & RTDs

Thermocouples are temperature sensing elements mostwidely used throughout industry for temperature measurements.Complete Thermocouple unit includes:

Sensing Element (thermocouple)Insulating terminal blockTerminal connection headExtension nipple or unionThermowell or protecting tube

44

Analyzer Systems

45

Analyzer Systems

46

Flow Metering Systems

47

Fire & Gas Detection Equipment

Simtronics is a world class provider of sophisticated gas andflame detections system. These products are used worldwideto provide early detection of hazardous events.All detectors ensure below parameters:

SafetyFast Reliable detectionSIL Compatible ReliabilityDurable mechanical designLong term stability Low life cycle costLow maintenanceLong operational lifetime

Multi Flame

Multi Tox Multi Xplo

GD 10P Flammable Deteator

Open Path H2S GD 1

TLU 600 Calibration Kit

Flammable Detector Long Version

Flammable Open Path

48

Detection CapabilitiesGas Detection - Infrared, catalytic, electrochemical, semiconductor (MOS), ultrasonicFlame Detection - Combined UV/IR, 3IR, Multispectrum IRSystems - Converntional 19" rack or addressable systems for safe area or hazardous area installations.Sampling systems and custom applications Fire Suppression - Water mist, deluge, sprinkler monitor,hydrant, dual agent gas systems, foam

Fire Alarm Panel

49

Fire & Gas Detection Equipment

Calibration Equipments

Decade BoxesResistance, Capacitance, Inductance.

Process Control EquipmentPressure, Temperature, & Loop calibrators.

Voltage & Current Test InstrumentsPortable Calibrators, Simulators & Sources.

Multifunction CalibratorsPrecision calibration for wide workload coverage.

Turnkey laboratory design and supply for lean and efficient test facilities.Built to optimise and automate the calibration process.

50

Calibration Equipments

Test Benches

CalBenchA Complete Calibration Laboratory in one Test Bench

CalBench is a custom-made system for specific user requirements,integrating modules for testing applications and much more.

Calibrates

51

Oscilloscopes

Decade Boxes

Power Supplies

Clamp Meters

Temperature Indicators

R-C-L Meters

Digital/Analog Multimeters

Pressure Gauges

Pressure Transducers

Process Instruments

Voltage & Current Sources

Temperature Sensors

pH and Conductivity Measurement

pH and redox electrodesInductive and conductive conductivity sensorsDissolved oxygen measurementChlorine, chlorine dioxide, ozone, hydrogenperoxide, and peracetic acid measuringProcess fittingsPneumatic retractable assemblyTransmitters/controllers

Pressure

Flow

Liquid Analysis

Pressure transducersPressure switchesPressure measuring cellsWireless pressure transmitterDiaphragm seals and accessoriesMeasuring devices for explosive areas

Flowmeters for steam, gas, and fluidsMID flow transmittersImpeller flow sensorsDifferential pressure transducers

52

Control and Automation Units

Control

Automation

HumidityHygro and hygrothermo transducers, capacitiveHygro and hygrothermo transducers, hygrometricCO2-measuring probe

Single and multichannel controllers

Process/program controllers

Panel-mounted thermostats

Surface-mounted thermostatsContact dial thermometers as display andcontrol device

Measuring, control and automation systemDisplay devicesAutomation softwarePower unitsSystem technologyTransmittersWireless transmittersSoftware and accessories

53

Oil & Gas Division - Mechanical

Equipments, Fabricated Units and Accessories

Pipes I Fittings I Flanges I Gaskets I Stud Bolts

Valves for Oil & Gas and Water Industry

Pipeline Services

Oil & Gas - Mechanical Products

54

55

59

64

70

Page No.

Equipments, Fabricated Units And Accessories

Hot Tapping - Split Tee

Repair Clamp

Expansion Joint

Hot Tap Tees are used in hot tapping operations , consistingof a full-encirclement fitting and a weld-neck flange. Hot Tap Tees are designed and manufactured to ensure the integrityof the piping system

FeaturesFull branch or reduced branch fittings for use in hot tappingoperations - Supplied with ASME Class 150, 300, 600 flangeswith raised face or RTJ grooves , upto 36'' size - Standard fittings meet the requirements ofASME B31.3 and ASME B31.4/B31.8 with a 0.72 design factor -All pressure containing weldsare 100% radiographed

The Pipeline Repair Clamp is an economical bolt together fittingconsisting of two half shells, designed to effect a temporary orpermanent repair to damaged or leaking pipelines. These clampscan be fitted to both surface and sub-sea pipeline. -Upto 48''size -ASTM A105, A216 WCB with ASTM A193 B7/2H Bolts

Rubber Expansion Joints are used for compensationof pipeline thermal expansion, for disalignment, forvibration isolation and reduction, for noise reductionfrom pipeline, pump and other equipment work.

Metallic Expansion Joints are useful to absorb differentialthermal expansion and vibration whilstcontaining thesystem pressure.

Fabric Expansion Joints are used in a variety of industrialuses including cement, paper & pulp, steel, automotive,air pollution and power/utility applications.

55


Monolithic Insulation Joints

Pipeline Pigs

Pig Signallers

Pipeline pigs are used for cleaning and inspection of pipesAvailable in variants like Foam Polly-Pigs, Steel Mandrel Pigs,Polyurethane Spheres, Solid-Cast Turbo Pigs and Spare rethane Cups & Discs

Non-intrusive pig signaler with either permanent magnetsor active transmitters mounted onto the pig to detect passage from 0.022 to 45.73 mph (0.01m/s to 20 m/s).

Intrusive pig singallers with mechanically operated signal flagswhich can be reset and are suitable for mounting on bothvertical and horizontal pipelines.

High and Low Pressure Pipeline PlugsPipeline plugs are also used for isolation and for very basicpig launching.

High pressure pipeline plugs are available from 4'' to 48'' towithstand upto 10 bars

Low pressure pipeline plugs are available from 1.5 '' to 48'' towithstand upto 10 psig

Monolithic insulating joints are used to electrically isolatesections of a pipeline to ensure full efficiency to cathodicprotection systems against corrosion. These insulation areused in gas networks of low, medium, increased - mediumor high pressure fed with gas and liquid fuels or water.-Usefulin before and after gas reducing and gauging stations, ingas and oil mining systems, on gas and liquid fuel reservoirsand systems.- Useful in underground and overhead constructions-Working pressure - Upto 420 bars- Leaktightness - 6 bar / 10 min

56


Strainers

Pressure Vessels

Heat Exchangers

Fabricated and cast strainers available in different materialgrades and different variants like Y-Type - Flanged Strainers Conical Strainers Basket Strainers Tee Strainer and Duplex StrainersMaterial Grade - CS, SS, DSSSizes - 1/2'' to 48''Upto 2500 Class- Ends - Screwed, Flanged

A closed container designed to hold gases or liquids at apressure substantially different from the ambient pressure.

Used as industrial compressed air receivers and domestichot water storage tanks.

Heat exchanger is used for efficient heat transfer from onemedium to another and widely used in space heating,refrigeration, air conditioning, power plants, chemical plants,petrochemical plants, petroleum refineries, natural gasprocessing, and sewage treatment.

Reactors & Separators

Reactors and separators for petrochemical plants

Chemical Injection FittingsInjection systems are used to inject a wide range ofchemicals into processes like biocides, demulsifiers,corrosion inhibitors etc.

- Allows for even distribution of the injected chemical.

- Sampling systems are used to take samples of the process fluid or medium for analysis.

57


Hub Connectors

Elaflex

Fire Protection Systems

- Replaces conventional ANSI or API flanges, ensures seal, and require less bolt loads.

- Useful even in high pressure systems of 60,000psi and above

-Withstands considerable bending moments/forces and axial loading under pressure without leaking

- Minimise maintenance downtime

- Uses reusable sealrings giving greater flexibility for hydro testing and commissioning

- Fittings, couplings, clamps, adaptors, Hoses, Hose Configurators

- Expanison Joints and Seals

- Nozzles

UL and FM approved systems to for active fire protection

- Sprinklers - Max working pressure of 16 bars

- DI and CI strainers upto 12'' and 175 PSI working pressure

- Flow meters for sizes upto 12 ''

- Grooved and threaded Pipes fittings for pressure rating upto 44 bars

- Pipe hangers and accessories

- Fire hydrants and hole reels

58


DESCRIPTION: PIPES

MATERIAL GRADE:Carbon Steel: A106 Gr B / API 5LB / A53 Grade B X42 - X52 - X60Carbon Steel (LT): A333 Gr 6 / API 5L PSL1 X52Stainless Steel: A312 Gr 304 / L , 316/ LDuplex Stainless Steel: A790 /A915 UNS S31803Super Duplex, Alloy Stainless Steel

STANDARDS: ASTM / ASME / API

SIZE RANGE: 1/2" - 72"Various Schedules Seamless / Welded / Tubing (Galvanised / Non Galvanised)

DESCRIPTION: BUTTWELD FITTINGS

MATERIAL GRADE:Carbon Steel: A234 Gr WPB, WPHY52, WPHY60, WPHY70Carbon Steel (LT): A420 Gr WPL6Stainless Steel: A403 Gr 304 / L , 316/ LDuplex Stainless Steel: A815 UNS S31803Super Duplex, Alloy Stainless Steel

STANDARDS: ASME / ANSI / MSS SP 75

PRODUCT: 45 / 90 Deg Elbow (Short / Long Radius),Reducing / Equal Tee, Eccentric / Concentric Reducer, End CapBARRED TEES, BENDS, LATERAL TEE, SIAMESE TEE

SIZE RANGE: 1/2" - 72"Various Schedules Seamless / Welded

DESCRIPTION: FLANGES

MATERIAL GRADE:Carbon Steel: A105Carbon Steel (LT): A350 Gr LF2Stainless Steel: A182 Gr F316Duplex Stainless Steel: A182 Gr F51 / F53Super Duplex, Alloy Stainless Steel

STANDARDS: ASTM / ASME / API

PRODUCT: WNRF / WNFF / Blind, Slip On SocketWeld Threaded Flanges, Lap Joint FlangeOrifice Flanges

SIZE RANGE: 1/2" - 72"Various Schedules / 150 - 2500#, 5000/10000/15000 PSI

59

DESCRIPTION: SPECTACLE BLINDS /SPACERS / SPADES

MATERIAL GRADE:Carbon Steel: A 516 Gr 60 /65 / 70Stainless Steel: A 240 TP 316Duplex Stainless Steel: A182 Gr F51 / F53 / A240 UNS S31803

STANDARDS: ASTM

SIZE RANGE: 2" - 24"Various Thickness 150 - 2500#

DESCRIPTION: GASKETS

MATERIAL GRADE:Carbon Steel: A 285 Grade CStainless Steel: A240 TP Gr F316Duplex Stainless Steel: A240 UNS S31803(Compressed Non Asbestos Fibre / EPDM / PTFE/ Neoprene)

STANDARDS: ASTM

PRODUCT: Spiral Wound Gaskets, InsulationGasket Sets, Tanged Insert Gasket, Ring Joint Gaskets,Metal Jacketed Gaskets

SIZE RANGE: 1/2" - 48"150 - 2500#

DESCRIPTION: FORGED FITTINGS

MATERIAL GRADE:Carbon Steel : A105Carbon Steel (LT) : A350 Gr LF2Stainless Steel : A182 Gr F316

STANDARDS: ASTM

PRODUCT: Threaded Fittings (Galvanised/Non Galvanised) 45 / 90 Deg Elbow ,Reducing / Equal Tee, Eccentric/Concentric Reducer, End Cap, Coupling, Bushing,Plug, Union

SIZE RANGE: 1/2" - 4"3000 - 9000#


60

DESCRIPTION: BRANCH FITTINGS

MATERIAL GRADE:Carbon Steel: A105Carbon Steel (LT): A350 Gr LF2Stainless Steel: A182 Gr F316Duplex Stainless Steel: A182 Gr F51 / F53Super Duplex, Alloy Stainless Stee

STANDARDS: ASTM

PRODUCTS: Sockolet, Threadolet, Weldolet,Nippoflange, NippoletLATROLE

SIZE RANGE: 1/2" - 24"Various Thickness and Pressure Class

DESCRIPTION: STUD BOLTS & NUTS

MATERIAL GRADE:A193 Gr B7M / A194 Gr 2HM, A193 Gr B7 / A194 Gr 2H,A320 L7 / A194 Gr 4, A320 Gr L7M / A194 Gr 7M, A193 Gr B8M / 8M,A182 F51, F55, ISO 898 / 1 class 8.8, B16 UNS C36000-TEMP.BS 2874 GRADE CZ 121

STANDARDS: ASTM

PRODUCT: J Bolt, U Bolt, Foundation Bolt, JackScrew, Hexagon Bolting, Structural Bolts

SIZE RANGE: Various Sizes and Lengths

DESCRIPTION: MILDSTEEL FITTINGS

MATERIAL GRADE:Carbon Steel: A234 Gr WPB,Carbon Steel (LT): A420 Gr WPL6Stainless Steel: A403 Gr 304 / L , 316/ LDuplex Stainless Steel: A815 UNS S31803

STANDARDS: ASME / ANSI

PRODUCT: 45 / 90 Deg Elbow (Short / Long Radius)Reducing / Equal Tee, Eccentric / Concentric Reducer,End Cap / BENDS

SIZE RANGE: 1/2" - 72"Various SchedulesSeamless / Welded


61

MATERIAL GRADE:Ductile Iron

STANDARDS: ISO / EN Standard

PRODUCTS: Full range of Fittings / Pipes

SIZE RANGE: 2" - 48"

DESCRIPTION: PLASTIC FITTNGS, VALVES, STRAINERS,EXPANSION JOINT, PIPE AND CEMENT

MATERIAL GRADE:CPVC (SCH80), SDR-11 (CPVC-SCH40), UPVC (SCH 40 & 80)

PRODUCT: PIPES, FITTINGS (TEES, ELBOWS,COUPLINGS, REDUCERS, CROSSES, WYES, ADAPTERS,CAPS, PLUGS, CLEANOUTS), SADDLES, FLANGES, VALVES(BALL, CHECK, GATE, BUTTERFLY, NEEDLE, DIAPHRAGM, Y PATTERN),STRAINERS & FILTERS (TEE STYLE, Y TYPE, TRUE UNIONY TYPE, BASKET, SUCTION), EXPANSION JOINT.

SIZE RANGE: STANDARD SIZES

MATERIAL GRADE:Groved Fittings

STANDARDS: A536

PRODUCT: Full Range of Fittings(Galvanised/Non Galvanised)

SIZE RANGE: 1" - 6"Various Thickness and Pressure class

MATERIAL GRADE:Malleable Iron Fittings

PRODUCT: Full Range of FittingsNPT, Screwed , BSPT (Galvanised/Non Galvanised)

SIZE RANGE: 1/4" - 6" 150#


62


63


VALVE TYPE: GATE VALVESIZE RANGE: 1/2" ~ 60"CLASS RATING: 150CL ~2500CL

MATERIAL GRADE:Carbon Steel: WCB, WCC, A105Low Temperature Carbon Steel: LCB, LCC, LF2Low Alloy Steel: WC6, WC9, C5,C12,F11, F22 Etc.Stainless Steel: CA15, CA6NM, CF8M, CF8, CF3M,CF3Duplex Stainless steel, Super Duplex Stainess Steel,Nickel Alloys, Copper alloys.

TECHNICAL SPECIFICATION: Wedge type design, Parallel slide design,Extended stem design, Pressure seal bonnet design, Extended bonnetfor cryogenic application, Gate valve with Bypass valve for highpressure service, Motor operated valve, Flanged/buttweld endthreaded/socket weld end Forged steel/Cast steel gate valve,API600/AP602/API 6A Valves.

VALVE TYPE: GLOBE VALVESIZE RANGE: 1/2" ~ 20"CLASS RATING: 150CL ~2500CL

MATERIAL GRADE:Carbon Steel: WCB,WCC, A105Low Temperature Carbon Steel: LCB,LCC, LF2Low alloy steel:WC6,WC9,C5,C12,F11,F22 Etc.Stainless Steel: CA15, CA6NM, CF8M, CF8, CF3M, CF3Duplex stainless steel, Super duplex stainess steel,Nickel alloys, Copper alloys.

TECHNICAL SPECIFICATION: Plug type design, Ball type design, Pressureseal bonnet design, Extended bonnet for cryogenic application, Motoroperated valve, Forged steel/cast steel globe valve, Flanged/buttweldend/threaded/socket weld end.

VALVE TYPE: SWING CHECK VALVESIZE RANGE: 1/2" ~ 36"CLASS RATING: 150CL ~2500CL

MATERIAL GRADE: Carbon Steel: WCB,WCC, A105Low temperature Carbon Steel: LCB, LCC, LF2Low alloy Steel: WC6, WC9, C5, C12, F11, F22 Etc.Stainless Steel: CA15, CA6NM, CF8M,CF8, CF3M, CF3Duplex Stainless Steel, Super duplex stainess steel,Nickel alloys, Copper alloys.

TECHNICAL SPECIFICATION: Swing check valve, Pressure seal bonnetdesign, Forged steel/Cast steel check valve, Flanged/buttweld end/threaded/socket weld end.

64

VALVE TYPE: NOZZLE CHECK VALVESIZE RANGE: 1" ~ 144"CLASS RATING: 150CL ~2500CL

MATERIAL GRADE: Carbon Steel: WCB,WCC,A105Low Temperature Carbon Steel: LCB,LCC,LF2Low alloy steel: WC6,WC9,C5,C12,F11,F22 Etc.Stainless Steel: CA15, CA6NM, CF8M, CF8, CF3M, CF3Duplex Stainless Steel, Super duplex stainess steel,Nickel alloys, Copper alloys.

TECHNICAL SPECIFICATION: Wafer type, Lug type, Double flange andButtweld end type,threaded end

VALVE TYPE: BALL VALVESIZE RANGE: 1/2" ~ 56"CLASS RATING: 150CL ~2500CL

MATERIAL GRADE: Carbon Steel: WCB,WCC, A105Low temperature Carbon Steel: LCB,LCC,LF2Low alloy steel:WC6,WC9,C5,C12,F11,F22 Etc.Stainless Steel: CA15, CA6NM, CF8M, CF8, CF3M, CF3Duplex stainless Steel, Super Duplex Stainess Steel,Nickel alloys, Copper alloys.

TECHNICAL SPECIFICATION: Floating ball valve design, Tunnion mountedball valve design, Extended spindle for burried application, Metal seatedball valve, soft seated ball valve, Fully weld contruction, single piece/twopiece/three piece construction.


VALVE TYPE: DUAL PLATE CHECK VALVESIZE RANGE: 2" ~ 144"CLASS RATING: 150CL ~2500CL

MATERIAL GRADE:Carbon Steel: WCB,WCC, A105Low Temperature Carbon Steel: LCB, LCC, LF2Low alloy Steel: WC6, WC9, C5, C12, F11, F22 Etc.Stainless Steel: CA15, CA6NM, CF8M, CF8, CF3M, CF3Duplex Stainless Steel, Super Duplex Stainess Steel,Nickel Alloys, Copper Alloys.

TECHNICAL SPECIFICATION: Wafer type, Lug type, Double flange andButtweld end type

65

VALVE TYPE: CONTROL VALVESIZE RANGE: 1/2" ~ 12"CLASS RATING: 150~1500

MATERIAL GRADE: Carbon Steel: WCB, WCC, A105Low temperature Carbon Steel: LCB, LCC, LF2Low alloy steel:WC6,WC9,C5,C12,F11,F22 Etc.Stainless steel: CA15, CA6NM, CF8M,CF8, CF3M, CF3Duplex stainless steel, Super duplex stainess steel,Nickel alloys, Copper alloys.

TECHNICAL SPECIFICATION: Control valves for severe duty application,Linear motion valves-Globe, Diaphram or pinch type, Rotary motionValve-Ball, Butterfly, Plug Type

VALVE TYPE: EMERGENCY SHUTDOWN VALVES(ESD VALVES)SIZE RANGE: 1/2" ~ 56"CLASS RATING: 150CL ~2500CL

MATERIAL GRADE: Carbon steel: WCB,WCC,A105Low temperature carbon steel: LCB,LCC,LF2Low alloy steel:WC6,WC9,C5,C12,F11,F22 Etc.Stainless Steel: CA15,CA6NM, CF8M, CF8, CF3M, CF3Duplex stainless steel, Super duplex stainess steel,Nickel alloys, Copper alloys.

TECHNICAL SPECIFICATION: ESD valve with Pneumatic actuatorESD valve with Hydralic actuator ESD valve with Electro-hydraulic actuator


VALVE TYPE: BUTTERFLY VALVESIZE RANGE: 1/2" ~ 48"CLASS RATING: 150~1500

MATERIAL GRADE: Carbon Steel: WCB, WCC, A105Low temperature Carbon Steel: LCB,LCC,LF2Low alloy steel: WC6, WC9, C5, C12, F11, F22 Etc.Stainless steel: CA15, CA6NM, CF8M, CF8, CF3M, CF3Duplex stainless Steel, Super duplex stainess steel,Nickel alloys, Copper alloys.

TECHNICAL SPECIFICATION: Soft seated and Metal seated contruction,Concentric, double offset, triple offset design Extended stem design,Motor operated valve

VALVE TYPE: PLUG VALVESIZE RANGE: 1/2" ~ 12"CLASS RATING: 150~1500

MATERIAL GRADE: Carbon steel: WCB,WCC,A105Low temperature Carbon Steel: LCB,LCC,LF2Low alloy steel: WC6, WC9, C5, C12, F11, F22 Etc.Stainless Steel: CA15, CA6NM, CF8M, CF8, CF3M, CF3Duplex stainless steel, Super Duplex Stainess Steel,Nickel alloys, Copper alloys.

TECHNICAL SPECIFICATION: Motor operated plug valve

66

VALVE TYPE: DIAPHRAM VALVESIZE RANGE: 1/2" ~ 14"CLASS RATING: 150~1500

MATERIAL GRADE: Carbon Steel: WCB,WCC, A105Low temperature Carbon Steel: LCB, LCC, LF2Low Alloy Steel: WC6, WC9, C5, C12, F11, F22 Etc.Stainless Steel: CA15, CA6NM, CF8M, CF8, CF3M, CF3Duplex stainless steel, Super duplex stainess steel,Nickel alloys, Copper alloys.

TECHNICAL SPECIFICATION: WEIR TYPE DIAPHRAGM VALVE, STRAIGHTTHROUGH DIAPHRAGM VALVE Lining:Neoprene/Natural/Rubber/Ebonite/Glass/Teflon/EPDM/FRP, Food grade etc. Diaphragm: Natural Neoprene,Hyplon, Butyl, EPDM, PTFE with neo, EPDM PAD, Viton, Nitrile Buna-N,Food grade, etc.

VALVE TYPE: INSTRUMENTATION VALVESIZE RANGE: 1/2" ~ 2"CLASS RATING: 150~2500

MATERIAL GRADE: Carbon Steel: A105Low temperature Carbon Steel: LF2Low alloy steel: F11, F22 Etc.Stainless steel: F316, F316L, F303, F303LDuplex Stainless steel, Super duplex stainess steel,Nickel alloys, Copper alloys.

TECHNICAL SPECIFICATION: Single block block and bleed typeDouble block and bleed type, Monoglange type, Modular type design,Sampling valve, Chemical injection valve, Needle valve, Manifold valve


VALVE TYPE: SAFETY RELIEF VALVESIZE RANGE: 1/2" ~ 8"CLASS RATING: 150~2500

MATERIAL GRADE: Carbon Steel: WCB, WCC, A105Low Temperature Carbon Steel: LCB, LCC, LF2Low alloy steel:WC6,WC9,C5,C12,F11,F22 Etc.Stainless Steel: CA15, CA6NM, CF8M, CF8, CF3M, CF3Duplex Stainless Steel, Super duplex stainess steel,Nickel alloys, Copper alloys.

TECHNICAL SPECIFICATION: Pressure Safety Valves, Relief ValvesPressure Reducing Valves, Self acting pressure control valve.

VALVE TYPE: FOOT VALVESIZE RANGE: 1/2" ~ 8"CLASS RATING: 150~600

MATERIAL GRADE: Carbon steel: WCB,WCC,A105Low Temperature Carbon Steel: LCB, LCC, LF2Low alloy Steel: WC6,WC9,C5,C12,F11,F22 Etc.Stainless Steel: CA15, CA6NM, CF8M, CF8, CF3M, CF3Duplex Stainless Steel, Super duplex stainess steel,Nickel alloys, Copper alloys.

TECHNICAL SPECIFICATION: flanged ends/Scrwed ends

67

VALVE TYPE: BUTTERFLY VALVESIZE RANGE: 50mm~2000mmCLASS RATING: PN6~PN25 150CL~1500CL

MATERIAL GRADE: Ductile iron, Cast Iron, Stainless Steel,Aluminium Bronze

TECHNICAL SPECIFICATION: Soft and metal seated butterfly valves forwater and sea water application. Double flange, Wafer type and Lugtype butterfly valve Valves for sewage water/drinking water application.FM/UL certified valves-fire fighting service

VALVE TYPE: GATE VALVESIZE RANGE: 50mm~2000mmCLASS RATING: PN6~PN25 150CL~900CL

MATERIAL GRADE: Ductile iron, Cast Iron, Stainless Steel,Aluminium Bronze

TECHNICAL SPECIFICATION: Soft seated and metal seated gate valveKnife Gate valve, Soft Sealing Type , Resilient Seat, for water service.Extension Spindle design, Actuation By Gearbox with Hand wheel,Pneumatic & Electrical, Valves for sewage water/drinking waterapplication, FM/UL certified valves-fire fighting service

VALVE TYPE: Non-Return ValveSIZE RANGE: 50mm~900mmCLASS RATING: PN6~PN25 150CL~900CL

MATERIAL GRADE: Ductile iron, Cast Iron, Stainless steelAluminium Bronze

TECHNICAL SPECIFICATION: Venturi, Swing type, ball check, Tilting disccheckvalve, Soft Sealing Type , Resilient Seat for water service.Extension Spindle design, Valves for sewage water/drinking waterapplication FM/UL certified valves-fire fighting service


VALVE TYPE: Choke ValveSIZE RANGE: 1/2" ~ 6"CLASS RATING: 150 4500 lbs ANSI - 2000 15000 lbs API

MATERIAL GRADE: Carbon Steel: A105Low temperature carbon steel: LF2 Low alloy steel:F11,F22 Etc.Stainless steel:F316, F316L, F303, F303LDuplex stainless steel, Super Duplex Stainess Steel, Nickel alloys,Copper alloys.

TECHNICAL SPECIFICATION: Cv range: 0.05 - 650

68

VALVE TYPE: AIR VALVESSIZE RANGE: 50mm~900mmCLASS RATING: PN6~PN25

MATERIAL GRADE: Ductile iron, Cast Iron, Stainless steel

TECHNICAL SPECIFICATION: Double Orifice Triple Function Air ValvesValves for sewage water/drinking water applicationFM/UL certified valves-fire fighting service

VALVE TYPE: Pressure Reducing Control ValveSIZE RANGE: 50mm~800mmCLASS RATING: PN6~PN25


TECHNICAL SPECIFICATION: Diapharm actuated and piton actuatedcontrol valve Valves for sewage water/drinking water applicationFM/UL certified valves for fire fighting service

VALVE TYPE: FLAP VALVESIZE RANGE: 50mm~800mmCLASS RATING: PN6~PN25


TECHNICAL SPECIFICATION: Valves for sewage water/drinking waterapplication


VALVE TYPE: BALL VALVESIZE RANGE: 1/4 to 4 in.CLASS RATING: PN6~PN25

MATERIAL GRADE: Ductile iron, Cast Iron, Stainless steelAluminium Bronze

TECHNICAL SPECIFICATION: Soft Sealing Type , Resilient Seat for waterservice. FM/UL certified valves-fire fighting service

69

Pipeline Services

70

Pipeline Services

TESON

71

Lighting Division

Commercial LuminaireDecorative & ArchitecturalHealth CareIndustrial

73747575

76777878

Indoor LightingZone 1 & 21 and 2 & 22

Explosion Proof

Exit LightsGreen Building

8080

Emergency

SolarLED

8181

82

Green Building

Chandeliers

Street LightingArea Lighting & Land Scape LightingPoles & High MastSports Lighting

Outdoor Lighting

72

79

Page No. Page No.

Indoor Lighting

Commercial Luminaire

Lighting of modern workspace has evolved from simple functional lighting to a more innovative andcreative approach.

Lighting can create a warm and vibrant atmosphere. Right lighting emphasizes on enhancingproductivity through quality of light rather than quantity of light alone.

73

Indoor Lighting

Decorative & Architectural

Lighting plays a substantial role to represent the aesthetics, contours and finish of each project.

Without being visible, the effects add value to the structures and provide visual appeal

74

Indoor Lighting

Health Care

Industrial

Right light increases patients sense of well being, create a warmenvironment, and supports the accomplishment of visual task

in different therapy.

75

Outdoor Lighting

Street Lighting

Street lighting is used to accentuate design and security. Streetlighting also blends with the surronding byenhancing the architectural details and hence termed as "street Furniture"

76

Outdoor Lighting

Area Lighting & Landscape Lighting

Landscape lighting is concerned with the illumination of features to exploit texture, form, and color inorder to suggest a sense of depth. Combination of light and shadow can create dramatic effects in

complete contrast to the day light scene.

77

Outdoor Lighting

Poles & High Mast

Sports Lighting

Conceptual lighting to illuminate large areas, facilitating safety & security. Appropiate material ofconstruction, design and ease of operation contribute to maintenance free installataions.

78

Sports lighting being uniqueeach time, we offercustomized solutions.

Explosion Proof

Hazardous Area Lighting

Explosion proof luminiares must meet stringent standards to ensure that the hazardous surroundingatmosphere is never exposed to ignite an explosive gas.

79

Emergency

Emergency lighting systems are used to provide safe, reliable illumination to designateareas during failure of power.

Energy efficient, day light harvesting features to utilize the natural resources and optimize powerconsumption, with reduction in Carbon emission to provide a GREEN environment

Green Building

Exit Lights

80

Green Building

LED

81

Chandeliers

Decorative, ceiling lights creating sense of pride for centuries and generatinga serene atmosphere in the spiritual buildings.

82

8497102107108111115

Mechanical Division

83

Power ToolsConstruction ToolsMetal Cutting ToolsPumpsFastenersManhole CoversMechanical Splicing Systems

Blockwork & Plaster Accessories

Tools Division

Fischer 117

125

Fixing Division

Page No.

Power Tools Tools Division

Compact Grinders

Models:W 780-115W 8-100W 8-115W 8-115 QuickW 8-125 QuickWP 8-125 Quick ProtectW 11-125 QuickWP 11-125 Quick ProtectWA 11-125 QuickWB 11-125 QuickWBA 11-125 QuickWE 14-125 Inox plusWE 14-125 QuickWE 14-150 plusWE 1450-125 RTWEA 14-125 PlusWEA 14-150 PlusWEPBA 14-125 Quick Protect

Features:Auto Cutoff Carbon BrushRobust long lasting Metabo Marathon MotorHigh overload capacityDie cast aluminium gear housingMetabo S-automatic torque limiting clutchAuto balancer for double the service life ofdiscs and minimal vibrations(2,7m/s2)Dead-man function switchMetabo "Quick" tool quick changeAdditional Metabo VibraTech (MVT) handle forvibration dampingTool-free adjustable guard; twist-proofedHigh torqueTacho Constamatic (TC) full-wave electronicsElectronic soft startOverload protectionRestart protectionMetabo disc brake: Quick stop of the grindingwheel within 2 seconds after switch-offAvailable in 110 V

84

Power Tools

Medium & Large Grinders

Models:W 17-180W 21-180W 21-230W 22-230W 23-180W 24-180WX 17-180WX 22-180WX 22-230WX 24-180WX 24-230WX 24-230 QuickWX 26-230 Quick WXLA 24-180 QuickWXLA 24-230 QuickWXLA 26-230 Quick

Features:Auto-stop carbon brushesMain handle rotatable without toolsAdditional handle adjustable according toapplication: left, right or upwardsRobust Metabo Marathon motorStarting current limitation with soft startAuto balancer for double the service life of discsand minimal vibrations(2,7m/s2)Metabo safety switch: safety lock againstunintentional startElectronic safety shutdown of the motor if thedisc jamsRestart protection: prevents unintentional start upof the machineDie cast aluminium gear housingMetabo "Quick": Quick-change toolsMetabo VibraTech (MVT): Reduction in the healthrisks caused by hand-arm vibrationReduced service expenditure thanks to Metabolonglife carbon brushesAvailable in 110 V

85

Tools Division

Power Tools

Rotary, Combination,ChippingHammers & Breakers

Models:BHE 2243BHE 22BHE 2444KHE 2443KHE 2444KHE 2650KHE 3250KHE 3251KHE 56KHE 76KHE 96

Features:Easy to hold in all working situations: threerubber-coated handles always ensure an optimalholding positionMetabo VibraTech (MVT): reduced vibration levelsVario Tacho Constamatic (VTC) full-wave electronicsThumbwheel for preselecting of speedElectronic soft start for precise spot-drillingDie cast aluminium gear housingTorque limiting clutchAuto-stop carbon brushesBrush wear indicatorAvailable in 110 V

86

Tools Division

Power Tools

Chipping Hammers & Breakers

Models:MHE 56MHE 96

Features:Metabo VibraTech (MVT): reduced vibration levelsLong, slim design for an upright working position when performing tasks at ground level.Vario Tacho Constamatic (VTC) full-wave electronicsElectronic soft startDie cast aluminium gear housingChisel can be fixed in 16 positionsAuto-stop carbon brushesBrush wear indicator

87

Tools Division

Power Tools

Cutoff Saw Machine

Models:CS 23-3552300 Watts

Features:Powerful(2300 W) and fast cutting for profiles, pipes and rods made of steel, cast iron,aluminium and other non-ferrous metals.Spindle lock for easy disc changeQuick clamping device with variable mitre conversion from -15 up to 45Motor and gear with ball bearing and designed for high loadsSwiveling blade guardAdjustable spark guide plateAdjustable depth guideAvailable in 110 V

88

Tools Division

Power Tools

Jig Saw and Sabre Saw

Models:STE 70STE 80 QuickSTE 90 SCSSTE 100 SCSSTE 135 PlusSTE 140 PlusSTEB 70 QuickSTEB 80 Quick

Models:PSE 1200

Features:Extremely powerful jig saw with VTC electronics for fast cutsinto softwood of up to 140 mmPrecise and material-matched sawingMetabo "Quick" no-tool saw blade change function withautomatic rejectionNo-tool adjustable footplate with rest pointsMotion-activated LED light for bright illumination of thecutting areaVario-Tacho-Constamatic (VTC) full wave electronicsRestart protection: Prevents unintentionally starting themachine.Robust gear and motor design and durable die castaluminium gear housingAvailable in 110 V

89

Tools Division

Power Tools

Magnetic Drilling Machine

Models:MAG 32MAG 50MAG 28 LTX 32

Features:Powerful magnetic core drill with large lift for core andfull drillingRobust Metabo Marathon Motor for extra long service lifeVario Tacho Constamatic (VTC) full-wave electronicsWith electronics and right/left rotation for cutting threads,grinding and loweringMagnet base with high holding power for safe operationAvailable in 110 V

90

Tools Division

Power Tools

Circular Saw

Models:KS 54KS 66KS 85KS 55 FSKS 66 PlusKSE 55 Vario PlusKSE 68 Plus

Features:Metabo S-automatic torque limiting clutchQuick stop of saw blade on shutting off the machineSpindle lockSturdy aluminum die cast saw housingFully closed guide plate for secure supportVibration-damping, non-slip rubber coated handleVario Tacho Constamatic (VTC) full-wave electronicsElectronic soft startOverload protectionExternal dust extraction is possibleAuto-stop carbon brushesAvailable in 110 V

91

Tools Division

Power Tools

Sanders & Table Saws

Belt Sanders

Disc Sanders

Models:BAE 75

Features:Powerful and loadable motor with high reserve capacityFast and easy sanding belt changeVario Tacho Constamatic (VTC) full-wave electronicsThumbwheel for preselection of belt speedSide handle for ideal machine guidanceDust extraction unit

Features:Multi-purpose machine for sanding & polishing even andcambered surfaces, wood, plastics, non-ferrous metals,sheet steel"Duo" Oscillating circuit setting for fine-finishing or heavystock removalDust-proof ball bearingSturdy aluminum die cast bearing housing Vibration damping, non-slip rubber support on the machinehousing and the handle

Models:SXE 400SXE 325 IntecSXE 425 Turbo tecSXE 450 Turbo tecFSR 2000 Intec

Table Saw

Features:Precise table saw in professional configuration - quickequipping for every applicationPowerful universal motorSturdy parallel guide/ripping fence with quick fasteningFreely height-adjustable saw blade

Models:TKHS 315C-2.0 WNBTKHS 315C-2.8 DNBTKHS 315 M-3.1 WNBTKHS 315 M-4.2 DNB

92

Tools Division

Power Tools

Special Tools For StainlessSteel (Inox)Sanders and Grinders:

Features:Robust long lasting Metabo Marathon Motor Vario TachoConstamatic (VTC) full-wave electronicsThumbwheel for preselecting of speedElectronic soft startRestart protectionFor burnishing, finishing and reconditioning stainless steeland other materials to a high glossLarge 270 wrap angle for efficient work.

Features:For burnishing, finishing and reconditioning stainless steeland other materials to a high glossSpindle lock for simple change of toolsVario Tacho Constamatic (VTC) full-wave electronicsElectronic soft startRobust long lasting Metabo Marathon MotorRestart protectionDie cast aluminium gear housing.

Models:Burnishing MachineSE 12-115 Set

Features:The cordless expert for stainless steel with reducedrevolutions for low temperature surface processing.High torqueSlim motor housing for ideal handlingTool change without keyTool-free adjustable guard; twist-proofedRobust and wear-resistant 4-pole motorElectronic soft start

Models:Cordless Inox grinderW 18 LTX 125 INOX

Models:Tube belt sandersRBE 12-180RBE 9-60

93

Tools Division

Power Tools

Cordless Drills /Screwdrivers

Features:Metabo "Quick": Quick change of tool holder and toolbeing usedSelectable "impuls" modeVariospeed (V) electronicsQuick StopIntegrated working lightDie cast aluminium gear housingPatented AIR COOLED technology for speedy charging andlong service lifeRobust battery packs with capacity displayThe high torque attachment PowerX3 triples the power ofthe tool for extreme applications(maximum soft torque 120 Nm)

Models:BS 12 NicdBS 14.4 LiBS 14.4 LTBS 14.4 LT QuickBS 18 LIBS 18 LTBS 18 LT QuickBS 18 LTX ImpulsBS 18 LTX QuickBS 18 LTX-x3 QuickPowerMax BSPowerMax BS BasicPowerMax BS pro

94

Tools Division

Power Tools

Other Cordless ToolsCordless Angle Grinder

Cordless Die Grinder

Cordless Hedge Trimmers

Cordless Cartridge Guns

Cordless Combo Sets

Cordless Fillet weld Grinder

Cordless Worksite Radio

95

Tools Division

Power Tools

Utility ToolsPumps Models:

P 3000 GP 3300 SP 4000 SP 5500 MP 600/1600 W

Features:For pumping, pumping out, pumping empty,circulation of clear waterGround water pumpingPump housing made of special steelWeightless and Sleek Design

CompressorsModels:Basic 260Basic 265Basic Air 250 Basic Air 350Classic Air 255Mega 350 D to 715 DPower Air 350Power Air V 400

Features:Compact and mobile piston compressor forprofessional use indoors and at construction sitesParticularly low on noise and vibrationsOil-lubricated piston condenserGood cold start feature thanks to pushbutton with starting valve

Vacuum Cleaners Models:AS 1200AS 20 LASA 1202ASA 32 LASR 2025ASR 2050ASR 35 L/M Autoclean

Features:Suitable for extracting dust and solid particlesAlso suitable for absorbing non-flammable liquidsIntegrated socket with automatic start mechanismEasy and quick filter changeElectro-magnetic vibration deviceLong filter service life and large cleaning intervalsStableExtra large wheels

96

Tools Division

Tools Division

Concrete Cutting Tools

97

Construction Tools

TILES/NATURAL

STONE


98

Tools DivisionConstruction Tools


99



100



101


Metal Cutting Tools

Applications

Cutting-off of: sheet metal, rods, profiles and pipes Particularly suitable for small cross-sections and thin sheets

Consumer Groups

Steel construction, terotechnology and shipbuilding; building construction; vehicle repair workshops; heating, plumbing and air-conditioning technology

MATERIALS, WORKPIECES

Quality

Short cutting-off times

Suitable for various materials Cutting-off to precise dimensions Unstrenuous working

Application Tips

Easy pendulum movement (oscillating) Composite materials (steel cables, cables, etc.) and nonferrous metals can also be cut without any problems

Nonferrous metals

Stone, concrete

Stainless steel Steel/cast steel

Steel/stainless steel

CUT-OFF WHEELS

102

Tools DivisionMetal Cutting Tools

Metal Cutting Tools

Type No. Shape Dimensions Specification PU Comments

223032 41 300x2,5x25,4 A46-BF 10 223033 41 350x2,8x25,4 A46-BF 10 485530 41 400x3x25,4 A46-BF 10

BASIC 41


497931 42 100x3x16 A30-BF * 25 Universal cut-off wheels for the widest range of material cross-sections (only steel).

497933 42 115x3x22,23 A30-BF * 25 497934 42 125x3x22,23 A30-BF * 25 309581 42 178x3x22,23 A30-BF * 25 497935 42 230x3x22,23 A30-BF * 25

497936 42 100x3x16 A30-BFINOX 25 Universal cut-off wheels for stain-less and acid resistant steel.

497937 42 115x3x22,23 A30-BFINOX 25 497939 42 125x3x22,23 A30-BFINOX 25 497943 42 178x3x22,23 A30-BFINOX 25 497945 42 230x3x22,23 A30-BFINOX 25 494440 42 100x3x16 C30-BF 25 For cutting stone and concrete. 494441 42 115x3x22,23 C30-BF 25 494443 42 125x3x22,23 C30-BF 25 223029 42 178x3x22,23 C30-BF 25 223031 42 230x3x22,23 C30-BF 25

223020 42 100x2,5x16 A30-BF * 25 Cut-off wheels for cutting all types of steel materials (incl. stainless steels and cast mate-rials).

223021 42 115x2,5x22,23 A30-BF * 25

223022 42 125x2,5x22,23 A30-BF * 25

223023 42 178x3x22,23 A30-BF * 25

222044 42 230x3x22,23 A30-BF * 25

*Fe, S, Cl content 0.1%

BASIC 42

BASIC CUT-OFF WHEELS

103


Metal Cutting Tools


540634 27 100x6x16 A30-BF 10 FAST CUT: Universal rough grinding wheels for use on steel; surface or edge grinding

540637 27 115x6x22,23 A30-BF 10 540639 27 125x6x22,23 A30-BF 10 540641 27 178x6x22,23 A30-BF 10

540642 27 230x6x22,23 A30-BF 10

540643 27 100x6x16 A30-BFINOX 10 FAST CUT: Universal rough grin-ding wheels for use on INOX; surface or edge grinding

540644 27 115x6x22,23 A30-BFINOX 10 540647 27 125x6x22,23 A30-BFINOX 10 540652 27 178x6x22,23 A30-BFINOX 10

540653 27 230x6x22,23 A30-BFINOX 10

222872 27 100x6x16 C30-BF 10 TOUCH: For grinding stone and concrete. 222873 27 115x6x22,23 C30-BF 10

222889 27 125x6x22,23 C30-BF 10 222043 27 178x6x22,23 C30-BF 10 222898 27 230x6x22,23 C30-BF 10

222854 27 100x6x16 A30-BF * 10 Rough grinding wheels for grinding different types of steel materials (incl. stainless steels and cast materials).

222858 27 115x6x22,23 A30-BF * 10 222860 27 125x6x22,23 A30-BF * 10 222863 27 178x6x22,23 A30-BF * 10 222865 27 230x6x22,23 A30-BF * 10


BASIC 27

BASIC ROUGH GRINDING MACHINE

104


Metal Cutting Tools


273884 27A 115x22,23 ZA40-B * 10 Versatile tool for universal appli-cations, suitable for angle grin-ders of any power.

273810 27A 115x22,23 ZA60-B * 10 273871 27A 115x22,23 ZA80-B * 10 273872 27A 125x22,23 ZA40-B * 10 273873 27A 125x22,23 ZA60-B * 10 273874 27A 125x22,23 ZA80-B * 10


BASIC 27A


320318 28A 115x22,23 ZA40-B 10 Versatile tool for universal appli-cations, suitable for angle grin-ders of any power.

320320 28A 115x22,23 ZA60-B 10 320322 28A 115x22,23 ZA80-B 10 320319 28A 125x22,23 ZA40-B 10 320321 28A 125x22,23 ZA60-B 10 320323 28A 125x22,23 ZA80-B 10


BASIC 28A


246870 28N 115x22,23 ZA40-B * 10 Versatile tool for universal appli-cations, suitable for angle grin-ders of any power.

246871 28N 115x22,23 ZA60-B * 10 246872 28N 115x22,23 ZA80-B * 10

BASIC 28N

BASIC FLAP DISCS

105


Metal Cutting Tools


895678 11BT 110/90x55x22,2 A16-B 2 895669 11BT 110/90x55x22,2 A36-B 2

895679 11BT 110/90x55x22,2 C16-B 2 895670 11BT 110/90x55x22,2 C36-B 2 895671 11BT 110/90x55x22,2 C60-B 2

STANDARD 11BT


895676 11ZB 110/90x55xM14 C16-B 2 895677 11ZB 110/90x55xM14 C60-B 2

STANDARD 11ZB

STANDARD CUP WHEELS

106


Speroni Pumps Made In Italy

Models:Domestic Range0.5HP, 1HP, 2HP

Submersible Range1 HP, 1.5HP, 2HP

Dewatering Range1HP, 2HP

Construction Range1.5HP, 2HP, 3HP

Special pressure Booster Range

Mono Block PumpsAll Ranges

Compressors-AIRMEC

50Lt,100Lt,150Lt,200Lt,500Lt

Generators Upto 10KVA

107

Tools DivisionPumps

Fasteners

108

Tools Division

Fasteners

109

Tools Division

Fasteners

110

Tools Division

111

Manhole Covers

Manhole Covers Tools Division

112

Manhole Covers


113

Meter Boxes

Manhole Covers


114

Tools DivisionManhole Cover - Fittings

Mechanical Splicing Systems

115

Tools Division

Mechanical Splicing Systems

116

Tools Division

Fischer Fixing Systems Division

Chemical Fixing

Chemical Anchor Fixng Kit

- Power Bond

- Epoxy mortar

, upto A0mm rebar

only for threaded rod application

- Vinyl elester

117

Fischer FIS SB 390 S - Super Bond

Fast setting with high bond strength forfixing threaded rod and rebars in all kindof base materials. Available in Capsule System also

Mechanical Fixings

FBS

Concrete Screw FBS THEFULLY REMOVABLE FIXINGIN CRACKED CONCRETEAND HOLLOW CORE SLABS

FDN Ceiling Nail

Cost Efficeint push through anchorfor multiple fixing of non structuraleapplications.

FNA II Nail Anchor

Installation friendly hammersetanchor for multiple fixings.

FHY Hollow Ceiling Anchor

The installation frierndly internallythreaded anchor for fixing in hollowcore concrete slabs.

118


Mechanical Fixings

119


Fischer

General Fixings

Universal Fixing UX

Nylon plug for all building materials.

Metal Frame Fixing FM The fixing for stress-free installation ofwindow and door frames with high fire resistance.

120

Fixing Systems Division

MEP Supports &Accessories

FUS 21D, FUS41D,FUS 62D

EMS 41 FEC FUS 41

FCN Clix M FCA Cantilever Arm FCN HK 41

UWS FAF FUF FFF

FSB 45 TKR FUF OC

121


MEP Supports &Accessories

FRSN FGRS FKS Plus FRS

FRS Triple FRSH

FRSP Clamps

FRS KFRSM M10/M12 / M16

122


Fire StopFire prevention is a critical consideration for those who are reponsible for creating the design,specification and construction of new buildings, with consideration in the ongoing maintenance ofoccupied premises.Effective firefighting within a building is generally achieved through a combinationof active and passive firestop systems and when used in conjunction with each other provide a balancedfire protection strategy.

Fischer FireStop systems cater to the needs of passive fire protection and conform to BS & AmericanStandards and are approved with Civil Defence of Sultanate of Oman.

123


124

Fixing Systems DivisionFischer

Angle Beads

The intended use of Angle Beads is to help the formation of corners and abutments which are resistant to chips, cracks and impact damage. Protecting corners & edges and giving better shape are the main purpose.

Plaster Stop Beads

Plaster Stop Beads are used for the. finishing andreinforcing of plaster edges. They provide a truestraight line and protect the plaster where it ismost vulnerable. They are available to suitvarious plaster depths.

Architrave Beads

Mainly used for decorative purposes to give achannel gap or a shadow between differentwalls .nishes (i.e., wall and ceiling or door andwindow reveals).

Architrave Beads Without Flange

Mainly used for decorative purposes to give ashadow between different walls finishes (i.e.,wall and ceiling or door and window reveals).

125

Expanded Mesh &Metal Products Blockwork & Plaster Accessories

Control Joint Beads

Designed to deal with normal initial stuccoshrinkage during the hydrating and curingstage of the portland cement stucco (generallyexterior or gypsum plaster interior) coats andminor thermal expansion and contraction.

Render Stop Beads

Major purpose is to obtain a lower edge toexternal Finishes and to protect stonework fromwater.

Corner Lath

Corner Lath is a jointless mesh, bent lengthwise inthe center and is used inside corner joints withdissimilar material base.

Expanded Metal Lath

Expanded Metal Lath is widely used as a plastering base for reinforcement against cracks. It is usedto provide a bond between dissimilar materials and at crack-prone areas adjacent to openings.It is highly recommended for reinforcing along lines of stress.

TMI plaster mesh comprises of Sheet Lath, Strip Lath and Coil Lath according to the sizes.

126


Sheet Lath Strip Lath Coil Lath

Rib Lath

Rib Lath is a specially designed expanded metallath for the construction of suspended ceilingsand stud wall partitions. This lath has an integral stiffening ribs roll-formedduring manufacturing. The mesh areas of the lathare expanded.

The Rib Lath is easy to handle and can be cutwith handshears and bent to the required angles.

Reinforcement Mesh

Block mesh reinforcing in walls will help to combat windeffects, withstand the loading of material against the wall,control shrinkage, thermal and settlement effects andenable the wall to span across openings. TMI block meshis manufactured to customer specifications, which enablesits strength to be used with maximum efficiency.

TLB - eeT reddaL Truss Tee - BTT

CTB - renroC ssurT CLB - renroC reddaL

127


Wall TiesTMI Wall Ties anchor plates are used to attach structural members or equipment to concrete structure.Plates and angles can also be used to frame openings in concrete walls or as shelf angles. They areused with precast or cast in place concrete

LintelTMI Steel channel Lintels provide open span supportover door and window apertures providing light weightsupport and efficient load bearing for all types of block.All TMI Lintels are manufactured using prime steelgalvanized with zinc which can be coated with blackthermoset polyester powder or black dual-coat epoxypaint which provides excellent long-term corrosionresistance.

AWSAnchor with support Two sided screw

punch anchor

ASP2Two sided slot anchor horizontal

AH-2ST

Z-plain tie bolt/screw-onZPSS

Bolt screw-on flat split-bend tie

LSSBSlot flat split-bend tie

LSSB-ST

L-plain tie slot with sleeve

LPSW-STPerforated tie special with sleeve

PTSWL-plain tie bolt/screw-on with sleeve

LPSW

LPSL-plain bolt/screw-on tie

LPTL-plain slot tieDove tail with rectangular

channel

WTRC

Dove tail with triangular channel

WTTC OCPTS Ocht channel with plain tiespecial

Ocht channel with triangular wire tie

OCTW

128


Wall Ties

Vertical horizontal movement tie slot

VHM-ST1VM2Vertical movement tie Bolt screw-on

VHM-ST2Vertical horizontal movement tie Slot

VM1Vertical movement tie Bolt screw-on

Plain tie special PTS LPS-S

L-perforated special tie bolt/screw-on

LPS-STL-perforated special slot tie

L-bolt tie with cut endLBT

Flat two sided split-endFS2

L-slot tie with with u-cut end

LST

LPS-STCL-perforated slot special cavity tie

LPS-SCL-perforated bolt/screw-on special cavity tie

Cavity wall tie bolt/screw-on

CWT

Ceiling wall strap tieWTCW

Z wire tieZWT

Safety cavity tieSCT

Z-shape wire tieWTZ

Butterfly wire tie

WTBDouble triangle wire tie double drip

DTW-DD

L-bolt screw-on safety

LSSFL-bolt/screw-on split-endLSS

L-slot tie with split-endLSS-ST

FCWTFlat two sided split end cavity wall tie

Corrugated bolt wall tiesCGWT

Two sided split twist tieFS2F

129


Drilling & Sawing Contracting Division

130

Coring ApplicationConcrete Grinding ApplicationDrilling, Anchoring and Rebar Fixing ApplicationWall Saw Cutting ApplicationWire Saw Cutting ApplicationProject Experience

Drilling & Sawing Contracting Division131132133134135136

Page No.

Coring on RCC Wall, Column, Slab, Floor and Beam from Dia 12mm to Dia 500 mm andany depth

Core Cutting Application:Coring Hole size - 12mm to 500mm diameter for any Reinforced concrete of thickness inhorizontal, vertical and inclined direction

131


Benefits of Diamond Cutting Technology System- Fast Cutting in Reinforced Concrete- Dust Free (Wet Cutting)- Cutting with Zero Vibration- Low Noise - Clear Edges of the Concrete- Accurate

Coring Application


Concrete Demolition Concrete Grinding Application

Concrete Scanning

132

- Grinding concrete- Removal of paint, epoxy, glue and other coatings from concrete- Preparation of concrete for Installation of new floorings / coatings- Elimination of irregularities in concrete- Repair of damaged concrete- Sealing preparation- Renovation works

Concrete Demolition Application: any thickness of the Plain Concrete and Reinforcedconcrete will be done Chipping, breaking & demolition by Electric BreakersPneumatic Breakers

Concrete Scanning: Scanning for Locating Rebars, Pipes, Conduits, Electric Cables, LiveElectric Cables, Post Tension Cables and other Objects in Concrete

Concrete Grinding Application

133


Drilling for Fischer Anchor Fixing (Mechanical and Chemical)

Drilling & Anchor Fixing Application: Drilling 6mm to 40mm and Fixing Machinical &Chemical Anchor Bolts besides all types of Rebars & Anchor bolts will be fixed inConcrete as per Fischer, Hilti and other Manufacturer's specification

Drilling, Anchoring and Rebar Fixing Application

Wall Saw Cutting Application

Wall saw Cutting for Wall, Slab, Column, Beam and Floor with 600 mm deep on RCC

Wall Saw - Concrete Cutting Application: Cutting Reinforced Concrete up to 600mmdeep in large opening for Windows, Door Openings, Beam, Column & Slab Cuttingswith Diamond Wall Saw Cutting System

134


Wall Saw Cutting Application

Wire Saw Cutting for Slab, Wall, Floor, Beam & Column with any deep on RCC Structures

Wire Saw - Cutting Application: Cutting reinforced concrete any depth for large Opening with any shape by using Diamond Wire Saw Cutting system

135


Wire Saw Cutting Application


Project Experience

Major Projects Mode of Work

Mechanical & Chemcial Anchor Fixing(for Chiller Plant ) Drilling & Core Drilling(for Chiller Plant, Sub Station & Steel StructureFixing) Concrete Demolition (at Valve Pits)

1. Salalah Airport

3. Seawage Treament PlantRebar Scanning ( for avoiding the Steel & ElectConduits) Core drilling & Concrete Demolition(for Pipe Lining up to Dia 350mm x 1 M deep)

4. Marble Granite Factory (Sohar)3M deep Coring for Cabling on RCC Foundation(for Cable Fixing through the Gang Sa Foundation)

5. Sohar PortCoring on RCC Foundation up to 1 M deep(for Crane Fxing & Moving)

6. Ghobra Flyover Drilling & Rebar Fixing with Fischer Chemical(for Extension Flyover)

Wall Saw Cutting for Pile Cutting from 600mm to800mm depth and 3.2 mtr dia Cutting for MicroTunnelling Purpose

7. Water Desalination Plant (Ghobra)

136

2. Muscat International Airport Coring Application (for Steel Structure Fixing)

Note

137

[email protected]

Head OfficeTel.: +968 2450 3915 Fax: +968 2450 3920

PO Box: 1827, P.C. 130, Al Athaibah, Sultanate Of Oman

Salalah ShowroomTel.: 968 2313 2915 Fax: +968 2313 2915

Shop No. 13 & 14, Near Al Mawasa ClinicSenaiyya, Salalah, Sultanate of Oman

Electrical

Instrumentation

Oil & GasLighting

2014CATALOGUE

2014 CA

TALO

GUE

Mechanical

ww

w.tecsintl.com

Sohar ShowroomTel.: +968 2675 3006 Fax: +968 2675 3007

PO Box: 505, P.C. 322, Falaj Al QabailSohar, Sultanate of Oman

2014 download product catalogue

Documents