2013 product guide - kelski · 2013 product guide. contents thermal arc welding equipment part no...

2013

Prod

uct G

uide

Contents

Thermal Arc Welding Equipment

Part No Page DC Stick + TIG Inverters and AC/DC Machines

W1003605 161S 5W1002903 175SE 6

W1003003 175TE 7W1003803 201 TS 8

10-3091 400 TS Air Cooled 910-3091WC 400 TS Water Cooled 10

W1006306 202 AC/DC 1110-3099 200 AC/DC 1210-3098 300 AC/DC 1310-3098WC 300 AC/DC Water Cooled 1410-9403 350 AC/DC 15 MIG MachinesW1003186 Fabricator 181i 16W1004207 Fabricator 211i 17W1004408 Fabricator 252i 18FAB250C Fabricator 250 III Compact 19FAB320C Fabricator 320 III Compact 20FAB320S Fabricator 320 III Separate 21FAB400S Fabricator 400 III Separate 22FAB500S Fabricator 500 III Separate 23W1000103PP PowerMaster Plus 320SP Air Cooled 24W1000303PP PowerMaster Plus 400SP Air Cooled 25W1000203PP PowerMaster Plus 400SP Water Cooled 26W1000503PP PowerMaster Plus 500SP Water Cooled 27W1000403PP PowerMaster Plus 400SP Robotic 28W1000603PP PowerMaster Plus 500SP Robotic 29DSA.40 Digital Torches - Air Cooled 30DSW.300/DSW.450 Digital Torches - Water Cooled 31

Multi Process Machines

10-3089 400 MST 32

Refer to Page Trolleys 33 - 34

Contents

Victor® Thermal Dynamics® Cutting Equipment

Part No Page

Plasma Cutting 1-3835-4 Drag-Gun Plus 351-4200-4 Cutmaster 12 Plus - SL40 ATC - 4.5m 361-5130-4 / 1-5131-4 Cutmaster 12 - SL60 ATC - 6.1m / 15.2m 371-1130-4 / 1-1131-4 Cutmaster 20 - SL60 ATC - 6.1m / 15.2m 381-1330-4 / 1-1331-4 Cutmaster 25 - SL60 ATC - 6.1m / 15.2m 391-1730-4 / 1-1731-4 Cutmaster 35 - SL100 ATC - 6.1m / 15.2m 401-1930-4 / 1-1931-4 Cutmaster 40 - SL100 ATC - 6.1m / 15.2m 413-0005 PAK 200 42 Refer to Page 1Torch 43-44Refer to Page Torch Adapter Kits 45Refer to Page Accessories 46-48

Tweco Arc Accessories

WHF41001 Auto-Darkening Welding Helmet 49

General Information Generator Requirements 50-51 Warranty Information 52 Terms and Conditions 53 Contacts 54

Victor TechnologiesTM understands professionals prefer to use the best tools – especially those who create and construct with metals. For nearly 100 years, Victor has built upon the aspirations of L.W. Stettner, a true visionary who brought innovation and safety to cutting, welding and gas control across the globe.

Stettner, Victor’s founder and worker who suffered the loss of an eye in a welding accident, set out to design and build safer products for cutting and welding. Equipment was manufactured to exacting standards, and Stettner’s designs resulted in numerous industry firsts in welding. For example, Victor cutting and welding torches were assembled with screws, not soldered. The patented assembly method provided greater tightness in the event of overheating.

From its beginnings Victor has been rooted in product improvement – relating directly to the user and improving the tools of their craft. These practices have made the Victor name synonymous with dependability and quality.

www.victortechnologies.eu

Victor TechnologiesTM provides superior solutions for cutting, welding and gas control, continuing its heritage of designing innovative products that evolve as a result of carefully listening to end users and anticipating their needs. This singular focus, built upon creating new and better solutions, is reflected in Victor’s vision statement, “Innovation To Shape The WorldTM.”

WEL

DIN

G E

QU

IPM

ENT

5

STICK (SMAW) INVERTER

161 S1ph 110/230V Input, 160A Stick Inverterwith Lift-Start TIG Function

Machine Specifications

Mains Input Voltage 1ph. 110/230v 110V = 17.8AOpen Circuit Voltage 71V 230V = 14.7AProtection Factor IP23SWarranty Period 2 Years

Features BenefitsDual Voltage Input Power Suitable for use on 110 or 230 VACExcellent Portability Weighs less than 8kg and has easy to carry shoulder strapThermal Overload Protection with indicator

Alerts operator if duty cycle is exceeded or airflow is blocked

Automatic Arc Control For STICK welding - Automatically fine tunes the arc to prevent the electrode from sticking and creating an inclusion

50mm Output Terminals Allow for easy polarity reversal and cable changeLift Start TIG Provides TIG arc starting without use of high frequencyDual Voltage Input Automatically linking to 110 or 230 VACPower Factor Correction ‘The greener option’ offers a higher output while reducing input power

consumption!

Item Description1 Amperage Control – the amperage control selects the

desired amperage between 10–160A (230v) and 10-125A (110v)

2 Warning Indicator – illuminates if machine overheats causing thermal overload

3 Power ON/OFF indicator4 Process selection switch. Allows operator to choose

output function from ‘Lift TIG’ or ‘Manual Arc’ process4

3 2

1

OPTIONS AND ACCESSORIES

305.050.404 TIG Torch with valve SA17V.4m 92.30305.050.804 TIG Torch with valve SA17V.8m 129.2410-9997 50mm! DINSE TIG Torch Adapter 39.77

Part No. Description List Price ¤ W1003605 TA 161S 160 Amp Inverter Package, electrode holder and lead, earth

cable and clamp with 50mm connections.650.00

Processes: STICK / LIFT TIGPart Number Duty Cycle @ Rated Output Output Range Dimensions (HxWxD) Weight

W1003605 30% @ 160A (230v)35% @ 100A (110v)

10 - 160A10 - 125A

229 x 135 x 394 mm 7.9 kg

POWER FACTOR CORRECTION

DUAL VOLTAGE230 / 110v

I efficiency

WEL

DIN

G E

QU

IPM

ENT

6

STICK (MMA) INVERTER

ARCMASTER 175 SE1ph 230V Input, 175A Stick Inverter with Lift-Start TIG function

Part No. Description List Price ¤ W1002903 TA 175 SE 175 Amp Inverter Package, electrode holder and lead, earth

cable and clamp with 50mm connections.427.00

OPTIONS AND ACCESSORIES305.050.404 TIG Torch with valve SA17V.4m 92.30305.050.804 TIG Torch with valve SA17V.8m 129.2410-9997 50mm! DINSE TIG Torch Adapter 39.77


Features BenefitsExceptional Performance Smooth stable arc with electrodes to 4mmExcellent Portability Weighs less than 6.5kg and has easy to carry shoulder strap

Thermal Overload Protection Indicator alerts if duty cycle is exceeded or airflow is blockedEasy to Use Simple, user friendly set up and operationCable Fitted Supplied with 230VAC primary cable50mm Output Terminals Allow for easy polarity reversal and cable changeLift Start TIG Provides TIG arc starting without use of high frequencyOver Voltage Protection Full input protection for over voltage

Item Description1 Power on Indicator. Visibly indicates that input power is

present

2 Process selection switch. Allows operator to choose output function from ‘Lift TIG’ or ‘Manual Arc’ process

3 Over temperature indicator. Illuminates if machine duty le has been exceeded

4 Weld current control (Amperage). Allows operator to set output welding amperage

421 3

Mains Input Voltage 1ph. 230v 17AOpen Circuit Voltage 65VWarranty Period 2 Years

Processes: STICK / LIFT TIGPart Number Duty Cycle @ Rated Output Output Range Dimensions (HxWxD) Weight

W1002903 20% @ 1750A (TIG)20% @ 175A (STICK)

5 - 175A 230 x 130 x 330 mm 6.5 kg

I efficiency

WEL

DIN

G E

QU

IPM

ENT

7

TIG (GTAW) INVERTER

ARCMASTER 175 TE1ph 230V Input, 175A TIG Inverter with HF TIG, Lift-Start TIG and Stick Functions

Part No. Description List Price ¤ W1003003 TA 175 TE Inverter Power Source with 17 Style TIG Torch, gas hose, electrode

holder and lead, earth cable and clamp with 50mm connections.884.00

Features BenefitsThermal Overload Protection with Indicator

Alerts the operator if duty cycle is exceeded or fan is blocked

Adjustable Arc Control For manual Arc (Stick) welding - the operator can adjust the arc penetration to eliminate electrode stick

Adjustable Down Slope control For TIG welding - the operator can adjust the time for the weld current to ramp down to eliminate craters

Lift Start TIG Provides TIG arc starting without use of high frequencyTrigger Control 2T (Normal) for short weld rund and 4T (Latch) for long weld runsOver Voltage Protection Full input protection for over voltage

Item Description1 Power on indicator

2 Amperage control - the amperage control selects the desired amperage between 5 - 175A

3 Thermal overload indicator4 Trigger mode selection switch (TIG process only)5 Adjustable Arc Control (Manual Arc (Stick) process only)

or Adjustable Down Slope Control (TIG process only)

6 Manual Arc (Stick), Lift TIG, HF TIG weld process selection control

7 Eight pin socket for torch trigger switch connection (Remote weld current control is not available)

8 50mm Dinse weld terminals

1 2 3 4 5 6

OPTIONS AND ACCESSORIESW4012800 Site Carry Case 42.43W4012700 TIG Torch, 17, 3m, 50mm Dinse with 5/8”-18 UNF Male gas fitting 103.9610-9811 Plug for Remote or TIG Torch Button 29.44


Mains Input Voltage 1ph. 230v 17.9AOpen Circuit Voltage 65VWarranty Period 2 Years

Processes: STICK / LIFT TIG / HF TIGPart Number Duty Cycle @ Rated Output Output Range Dimensions (HxWxD) Weight

W1003003 20% @ 175A 5 - 175A 225 x 130 x 330 mm 7.5 kg

I efficiency

WEL

DIN

G E

QU

IPM

ENT

8

TIG (GTAW) INVERTER

ARCMASTER 201 TS1ph 110/230V input, 200A TIG Inverter with HF Tig, Lift TIG, Stick, Hot Start, 2T/4T Function, Down Slope Timer and Arc Force Control

Part No. Description List Price ¤ W1003803 TA 201TS Inverter Power Source 200 Amp Inverter Package with 26 Style TIG

Torch with remote current control, electrode holder and lead, earth cable and clamp with 50mm connections.

1,144.00

OPTIONS AND ACCESSORIES10-4016 Remote Foot Control 7.6m lead and plug 373.73W4013601 TIG Torch, 26, 3m, 50mm Dinse with 5/8”-18 UNF Male gas fitting 171.6310-9811 Plug for Remote or TIG Torch Button 29.44TM-1MS-5H Replacement TIG Torch Trigger 15.29


Mains Input Voltage 1ph. 110/230v Open Circuit Voltage 71V 110V = 20AProtection Factor IP23S Warranty Period 2 Years 230 = 16A

Features BenefitsDual Voltage Input Power Suitable for use on 110 or 230 VACThermal Overload Protection Alerts the operator if duty cycle is exceeded or fan is blocked with indicatorAdjustable Arc Control For Manual Arc (Stick) welding - the operator can adjust the arc penetration to

eliminate electrode stickAdjustable Down Slope Control For TIG welding - the operator can adjust the time for the weld current to ramp

down to eliminate cratersLift-Start TIG Provides TIG arc starting without use of high frequencyHF Arc Starting Provides non-contact arc starting that eliminates tungsten or material contaminationTrigger Control 2T (Normal) for short weld runs and 4T (Latch) for long weld runsOver Voltage Protection Full input protection for over voltagePower Factor Correction ‘The greener option’ offers a higher output while reducing input power consumption!

Item Description1 Power indicator Light2 Overheat / Fault Indicator Light3 2T/4T Trigger Switch / Hold4 Stick / Lift TIG / HF TIG Process Switch5 Down Slope / Arc Force Control Knob6 Weld Amperage Controk Knob

1

6

2 3

4

5


W1003803 20% @ 200A 10 - 200A (230v)10 - 160A (110v)

230 x 135 x 445 mm 10 kg

DUAL VOLTAGE230 / 110v TIG TORCH REMOTE FITTED AS STANDARD


I efficiency

WEL

DIN

G E

QU

IPM

ENT

9

TIG (GTAW) INVERTER

ARCMASTER 400 TS400V Input, 400A TIG Inverter with HF TIG, Lift TIG, Stick, Hot Start, Digital Meters, 2T/4T Function, Up Slope/Down Slope with Repeat Function and Full Function Built In Pulse

CART.2 ArcMaster 3.1 Workshop Cart 286.0010-2007 Remote Foot control 7.6m lead and plug 474.0910-2005 Remote Hand Pendant 7.6m lead and plug 665.0010-2096 14 Pin Plug for Remote or TIG Torch Button 68.9010-2097 Cable Clamp for 14 Pin Plug 11.53304.090.404 SA.26.4 TIG Torch 145.24


Part No. Description List Price ¤ 10-3091 TA 400 TS 400 Amp DC TIG Inverter Power Source with mains cable, TIG

torch plug (10-2096) and cable clamp (10-2097)4,910.00

Machine SpecificationsMains Input Voltage 3ph. 380/415v Open Circuit Voltage 65V 14AProtection Factor IP23S Warranty Period 3 Years

Item Description1 Pulse Function - enables the TIG current pulse functions2 Scroll Buttons - Used to select the parameter to be set. The LED’s show which function is

being adjusted on the Sequence Graph3 TIG Mode Functions - Pressing this button scrolls through the output TIG function models

(Standard, Slope, Slope w/repeat, Spot)4 Digital LED Display - Welding amperage and parameter values are displayed in this window,

internal warnings such as over temperature, lor ow high input voltage applied are signalled to the operator by a warning sound and error message on the screen

5 Save/Load Buttons (400 TS) - By using the Save & Load buttons the operator can easily save up to 5 welding parameter programmes

6 Process Button - This button slects between STICK, HF TIG or Lift TIG mode7 Control knob - allows the operator to adjust the output amperage within the entire range of

the power source, also used to set each parameter value

Features BenefitsSmart Logic® Eliminates damage if the machine is accidentally installed to the improper voltageThermal Overload Protection with Indicator Alerts the operator if duty cycle is exceeded or airflow is blockedSimple to use Control Panel Interface All functions and controls are easily set through robust easy to use push button switchesRemote Receptacle Allows remote devices to be connected for controlling amperage and output contactorWarning Circuitry Alerts operator of power supply abnormalitiesVRD VRD stands for Voltage Reduction Device, it reduces the OCV when the power supply is

not in use. Eliminates the need for add on voltage reducers. (Field Capable)Programmable Allowing for 5 welding programmes to be saved for maximum flexibility as standard

featuresLift Start TIG Provides TIG arc starting without use of high frequencyHot Start For STICK welding - Provides ease of arc startsHF Arc Starting Provides non-contact arc starting that eliminates tungsten or material contaminationTIG Pulser & Sloper Provides Pulse ON/OFF, Pulse Frequency, peak % time, background and peak amperage,

initial and final slope times and amperage controlParameter Memory Settings Gives memory rogrammes which can easily be saved and recalled to give job settings to

the operator at the push of a button


10-3091 25% @ 400A 5 - 400A 420 x 220 x 450 mm 21 kg

5

2

7

6

1

4

3

I efficiency

WEL

DIN

G E

QU

IPM

ENT

10

TIG (GTAW) INVERTER

ARCMASTER 400 TS WATER COOLED PACKAGE400V Input, 400A TIG Inverter with HF TIG, Lift TIG, Stick, Hot Start, Digital Meters, 2T/4T Function, Up Slope/Down Slope with Repeat Function and Full Function Built In Pulse

CART.2 ArcMaster 3.1 Workshop Cart 286.00WC.ARCM3.1 ArcMaster Cooler 1346.0010-2007 Remote Foot control 7.6m lead and plug 474.0910-2005 Remote Hand Pendant 7.6m lead and plug 665.0010-2096 14 Pin Plug for Remote or TIG Torch Button 68.9010-2097 Cable Clamp for 14 Pin Plug 11.53302.050.404 SA.18.4 TIG Torch 180.93GAS50381 TIG Torch Adaptor 20.287-3580 Torch Coolant (3.8l) 29.90


Part No. Description List Price ¤ 10-3091WC TA 400 TS 400 Amp DC TIG Inverter Power Source with water-cooler,

workshop cart, SA18 TIG Torch, TIG adaptor, coolant, mains cable, TIG plug and cable clamp

6,656.00















10-3091WC 25% @ 400A 5 - 400A 420 x 220 x 450 mm (P/S) 21 kg

5

2

7

6

1

4

3

I efficiency

WEL

DIN

G E

QU

IPM

ENT

11

TIG (GTAW) INVERTER

ARCMASTER 202 AC/DC1ph 230V Input, 200A TIG Inverter with HF TIG, Lift TIG, Stick, Hot Start, Digital Meters, 2T/4T Function, Up Slope/Down Slope and Full Function Built In Pulse, AC Frequency Control and AC Wave Balance Control

Machine SpecificationsMains Input Voltage 1ph. 230v Open Circuit Voltage 72V 15.5AProtection Factor IP23S Warranty Period 2 Years

Part No. Description List Price ¤ W1006306 Arcmaster 202 AC/DC 200 Amp AC/DC TIG Inverter Power Source with 3m 26

Style TIG Torch with remote current control, electrode holder and lead, gas hose, earth cable and clamp with 50mm connections

1,519.00

OPTIONS AND ACCESSORIES10-4016 Remote Foot Control 7.6m lead and plug 373.73W4013601 TIG Torch, 26, 3m, 50mm Dinse with 5/8”-18 UNF Male gas fitting 171.6310-9811 Plug for Remote or TIG Torch Button 29.44TM-1MS-5H Replacement TIG Torch Trigger 15.29

Features Benefits

Thermal Overload Protection with Indicator Alerts the operator if duty cycle is exceeded or airflow is blockedSimple to use Control Panel Interface All functions and controls are easily set through robust easy to use push button switchesAdjustable Arc Control For manual Arc (Stick) welding - the operator can adjust the arc penetration to eliminate

electrode stickRemote Receptacle Allows remote devices to be connected for controlling amperage and output contactorLift Start TIG Provides TIG arc starting without use of high frequencyHF Arc Starting Provides non-contact arc starting that eliminates tungsten or material contaminationTIG Pulser & Sloper Provides Pulse ON/OFF, Pulse Frequency, peak % time, background and peak amperage,

initial and final slope times and amperage control


W1006306 20% @ 200A 5-200A 400 x 240 x 475 mm 22 kg

1 - Selection key for Stick or TIG mode2 - Selection key for Pulse3 - Selection key for Purge4 - Programme reverse button5 - Amperage control knob6 - Programme advance button7 - 2 stroke or 4 stroke mode indicator8 - Selection key for HF or Lift Arc TIG

TIG Torch with remote current control supplied as standard

1

2

3

4

5

6

7

8

I efficiency

WEL

DIN

G E

QU

IPM

ENT

12

TIG (GTAW) INVERTER

ARCMASTER 200 AC/DC1ph 230V Input, 200A TIG Inverter with HF TIG, Lift TIG, Stick, Hot Start, Digital Meters, 2T/4T Function, Up Slope/Down Slope with Repeat Function and Full Function Built In Pulse, AC Frequency Control and AC Wave Balance Control

Part No. Description List Price ¤ 10-3099 TA 200 AC/DC 200 Amp TIG Inverter Power Source with mains cable and Tig

plug (10-9811)3,410.00

OPTIONS AND ACCESSORIES10-4016 Remote Foot control 7.6m lead and plug 373.7310-9811 Plug for Remote or TIG Torch Button 29.44304.090.404 SA.26.4 TIG Torch 145.24

Machine SpecificationsMains Input Voltage 1ph. 230v Open Circuit Voltage 65V 22AProtection Factor IP23S Warranty Period 3 Years

Features BenefitsSmart Logic® Eliminates damage if the machine is accidentally installed to the improper voltageThermal Overload Protection with Indicator Alerts the operator if duty cycle is exceeded or airflow is blockedSimple to use Control Panel Interface All functions and controls are easily set through robust easy to use push button

switchesRemote Receptacle Allows remote devices to be connected for controlling amperage and output contactorWarning Circuitry Alerts operator of power supply abnormalitiesVRD VRD stands for Voltage Reduction Device, it reduces the OCV when the power supply is

not in use. Eliminates the need for add on voltage reducers. (Field Capable)Lift Start TIG Provides TIG arc starting without use of high frequencyHF Arc Starting Provides non-contact arc starting that eliminates tungsten or material contaminationTIG Pulser & Sloper Provides Pulse ON/OFF, Pulse Frequency, peak % time, background and peak

amperage, initial and final slope times and amperage controlParameter Memory Settings Gives memory rogrammes which can easily be saved and recalled to give job settings

to the operator at the push of a button





5 Control knob - allows the operator to adjust the output amperage within the entire range of the power source, also used to set each parameter value

6 Process Button - This button slects between STICK, HF TIG or Lift TIG mode7 AC/DC Button - Selects between AC or DC welding output5 643

2 1 7


10-3099 25% @ 200A / 40% @ 160A 5 - 200A 360 x 180 x 420 mm 17 kg

I efficiency

WEL

DIN

G E

QU

IPM

ENT

13

TIG (GTAW) INVERTER

ARCMASTER 300 AC/DC3ph 400V Input, 300A TIG Inverter with HF TIG, Lift TIG, Stick, Hot Start, Digital Meters, 2T/4T Function, Up Slope/ Down Slope with Repeat Function and Full Function Built In Pulse, AC Frequency Control and AC Wave Balance Control

CART.2 ArcMaster 3.1 Workshop Cart 286.00WC.ARCM3.1 ArcMaster Cooler 1346.0010-2007 Remote Foot control 7.6m lead and plug 474.0910-2005 Remote Hand Pendant 7.6m lead and plug 665.0010-2096 14 Pin Plug for Remote or TIG Torch Button 68.9010-2097 Cable Clamp for 14 Pin Plug 11.53GAS50381 50mm2 DINSE TIG Torch adapter 20.28304.090.404 SA.26.4 TIG Torch - air cooled 145.24


Part No. Description List Price ¤ 10-3098 TA 300 AC/DC 300 Amp AC/DC TIG Inverter Power Source with mains

cable, TIG plug (10-2096) and cable clamp (10-2097) 5,455.00














6

9

8

7

3 4 5

12


10-3098 25% @ 300A / 40% @ 250A 5 - 300A 420 x 210 x 450 mm 24 kg

I efficiency

WEL

DIN

G E

QU

IPM

ENT

14

TIG (GTAW) INVERTER

ARCMASTER 300 AC/DC WATER-COOLED PACKAGE3ph 400V Input, 300A TIG Inverter with HF TIG, Lift TIG, Stick, Hot Start, Digital Meters, 2T/4T Function, Up Slope/ Down Slope with Repeat Function and Full Function Built In Pulse, AC Frequency Control and AC Wave Balance Control

CART.2 ArcMaster 3.1 Workshop Cart 286.00WC.ARCM3.1 ArcMaster Cooler 1346.0010-2007 Remote Foot control 7.6m lead and plug 474.0910-2005 Remote Hand Pendant 7.6m lead and plug 665.0010-2096 14 Pin Plug for Remote or TIG Torch Button 68.9010-2097 Cable Clamp for 14 Pin Plug 11.53302.050.404 SA.18.4 TIG Torch - water cooled 180.93GAS50381 TIG Torch Adaptor 20.287-3580 Torch coolant (3.8l) 29.90


Part No. Description List Price ¤ 10-3098WC

TA 300 AC/DC 300 Amp AC/DC TIG Inverter Power Source with water-cooler, workshop cart, 4m SA18 TIG Torch, TIG Adaptor, coolant, mains cable, TIG plug and cable clamp

7,124.00













6

9

8

7

3 4 5

12


10-3098WC 25% @ 300A / 40% @ 250A 5 - 300A 420 x 210 x 450 mm 24 kg


I efficiency

WEL

DIN

G E

QU

IPM

ENT

15

TIG (GTAW) INVERTER

ARCMASTER 350 AC/DC3ph 400V Input, 350A Tig Inverter with HF Tig, Lift Tig, Stick, Digital Meters, 2T/4T Function, Up Slope/Down Slope with Repeat Function and Full Function Built In Pulse, AC Frequency Control and AC Wave Balance Control & IP & RPI Adjustment

10-9996 Thermal Arc Remote Foot Control 7.6m lead and plug 438.57010330 Thermal Arc Remote Hand Control 10m RC01 349.01C04025 5 Pin TIG Plug 47.95GAS50381 50mm2 DINSE TIG Torch adapter 20.28302.050.404 SA.18.4 TIG Torch - water cooled 180.93


Part No. Description List Price ¤10-9403 TA 350 AC/DC 350 Amp AC/DC TIG Inverter Power Source with HD Inverter

Cart, HD Cooler TIG, mains cable, and TIG plug (C04025)7,116.00

Machine SpecificationsMains Input Voltage 3ph. 400v Open Circuit Voltage 57V 14.3AProtection Factor IP23 Warranty Period 2 Years

Features BenefitsSmart Logic® Eliminates damage if the machine is accidentally installed to the improper voltageThermal Overload Protection with Indicator Alerts the operator if duty cycle is exceeded or airflow is blockedSimple to use Control Panel Interface All functions and controls are easily set through robust easy to use push button switchesAutomatic Arc Control For STICK welding - Automatically fine tunes the arc to prevent the electrode from

sticking and creating and inclusionRemote Receptacle Allows remote devices to be connected for controlling amperage and output contactorLift Start TIG Provides TIG arc starting without use of high frequencyHF Arc Starting Provides non-contact arc starting that eliminates tungsten or material contaminationTIG Pulser & Sloper Provides Pulse ON/OFF, Pulse Frequency, peak % time, background and peak amperage,

initial and final slope times and amperage controlIP Adjustment Adjusts the amperage value for the positive/cleaning cycle in AC welding, giving heat

input and bead control to the weld profileRPI Adjustment Adjusts the arc polarity to give precise arc ignition at the tungsten pointParameter Memory Settings Gives memory rogrammes which can easily be saved and recalled to give job settings to


F1 - Welding mode setting key «MMA»/«TIG 2 stroke»/«TIG 4 stroke»F2 - SET UP setting keyF3 - PULSE ON/OFF setting KeyF4 - Low current adjustment setting keyF5 - PULSE frequency adjustment setting keyF6 - AC ON/OFF setting keyF7 - AC frequency adjustment setting key F8 - Cleaning/penetration balance setting keyF9 - Setting key for SETUP choice and for parameters: pregas, initial current, up-slope timeF10 - Setting key for SETUP choice and for parameters: post gas duration, final currentF11 - Digital displayF12 - Digital displayF13 - Knob for all parameters adjustmentF14 - Knob for down slope time adjustmentF15 - Indicator «MMA welding»F16 - Indicator «2 stroke TIG welding» F17 - Indicator «4 stroke TIG welding»F18 - Indicator «current in A» displayed on F11F19 - Indicator «value in %» displayed on F11F20 - Indicator «time in s» displayed on F11F21 - Indicator «frequency in Hz» displayed on F11

F22 - Indicator «dimension in mm» displayed on F11F23 - Indicator «pre gas duration» in modificationF24 - Indicator «initial current» in modificationF25 - Indicator «up-slope time» in modificationF26 - Indicator «PULSE mode» ONF27 - Indicator «AC mode» ONF28 - Indicator «final current» in modificationF29 - Indicator «post gas duration» in modificationF30 - Indicator main supply defaultF31 - Indicator cooler unit default

Please note: To fit a 3 piece water cooled TIG torch to this unit for TIG welding you will need a 50mm2 DINSE type TIG torch adapter (part number 10-9997)


10-9403 40% @ 350A / 60% @ 300A 3 - 350A 704 x 279 x 460 mm 39 kg

I efficiency

WEL

DIN

G E

QU

IPM

ENT

16

INVERTER MIG (GMAW) MACHINE

FABRICATOR 181i1ph 230V Input, 180A Compact MIG & Multiprocess Inverter5kg/7.5kg wire spool capacity

62020 0.6/0.8mm Hard Wire V groove feed roll 36.3762022 0.9/1.2mm Hard Wire V groove feed roll 36.3762179 0.8/1.0mm Soft Wire U groove feed roll 36.3762024 0.9/1.2mm Soft Wire U groove feed roll 36.3762028 0.8/0.9mm Cored Wire V knurl feed roll 36.3762023 1.2/1.6mm Cored Wire V knurl feed roll 36.37WS180XE-10-3035 Tweco Weldskill 180A MIG Torch, 3m 104.83310.050.002 17V Tig Torch with 4m Lead 142.9710-4016 7.6m Foot Control 373.73W7004930 Replacement Gas Hose 24.26W4015300 Soft Carry Bag 48.36W4014700 Basic Utility cart 297.00


Part No. Description List Price ¤W1003186

W1003186/SE

Fabricator 181i Package with Tweco Weldskill 180A MIG Torch (3m)(Ordered from Victor Technologies UK)

Fabricator 181i Package with TWE1 MIG Torch (3m)(Ordered from Victor Technologies Italy)Fabricator 181i Compact MIG Inverter with feed rolls for 0.6 - 0.8mm knurled and hard wire and 1 - 1.2mm soft wire, gas hose, Tweco MIG Torch, earth cable and clamp, mains cable

853.00

853.00

Machine SpecificationsMains Input Voltage 1ph. 230v 16.6AWelding Current Range 10 - 180A Wire Drive Type 2 RollProtection Factor IP23S

Welding OutputMIG 20% @ 180A

Warranty Period 2 Years MMA 20% @ 175ATIG 25% @ 175A

Features BenefitsDigital Meters Allows the operator to easily check and adjust parametersThermal Overload Protection with Indicator Alerts operator if duty cycle is exceeded or airflow is blockedAdjustable Burn Back Control Gives precise wire burn back for diameter of wire and good re-striking capabilityTrigger Latching Facility Allows trigger to be released for continuous long weld runs in MIG and TIG modesReverse Polarity Facility Allows use of self shielding wires for outdoor applications50mm Output Terminals Allows for easy polarity reversal and cable change

Item Description1 Power Indicator2 Thermal Overload Indicator3 Digital Voltage Meter4 Push-Button Process Selection5 Push-Button Trigger Mode Control6 Variable Inductance Control7 Multifunction control - Infinitely

Variable Voltage / Down Slope / Arc Force Control

8 Amperage Control9 Digital Amperage Meter

Processes: MIG / FLUX CORED / STICK / LIFT TIGPart Number Duty Cycle @ Rated Output Output Range Dimensions (HxWxD) Weight

W1003186 20% @ 180A 10 - 180A 410 x 210 x 450 mm 14.6 kg

I efficiency

4

321

9

8

7 6

5

WEL

DIN

G E

QU

IPM

ENT

17


FABRICATOR 211i1ph 110/230V input, 210A Compact MIG & Multiprocess Inverter15 kg Wire Spool Capacity

62020 0.6/0.8mm Hard Wire V groove feed roll 36.3762022 0.9/1.2mm Hard Wire V groove feed roll 36.3762179 0.8/1.0mm Soft Wire U groove feed roll 36.3762024 0.9/1.2mm Soft Wire U groove feed roll 36.3762028 0.8/0.9mm Cored Wire V knurl feed roll 36.37WS220XE-10-3035 Tweco Weldkill 220A MIG Torch, 3m 114.66SG160XTA12-3035 Tweco Spool Gun, 4m 587.60310.090.001 26V Tig Torch with 4m Lead 195.1810-4016 7.6m Foot Control 373.73W4014700 Basic Utility Cart 297.00W4015001 Single Cylinder Professional Cart 354.00W4015002 Dual Cylinder Professional cart 510.00872726 Consumables Storage Box 14.00W7004930 Replacement Gas Hose 24.26


Part No. Description List Price ¤ W1004207

W1004207/SE

fabricator 211i Package with Tweco Weldskill 220A MIG Torch (3m)(Ordered from Victor Technologies UK)Fabricator 211i Package with Tweco TWE2 MIG Torch (3m)(Ordered from Victor Technologies Italy)Fabricator 211i Compact MIG Inverter with feed rolls for 0.6 - 0.8mm knurledand hard wire and 1 - 1.2mm soft wire, gas hose, Tweco MIG Torch, electrodeholder and lead, earth cable and clamp with 50mm connections

1,139.00

1,139.00

Machine SpecificationsMains Input Voltage 1ph. 230/110V 110V = 19.6AWelding Current Range 10 - 210A Wire Drive Type 2 Roll 230V = 15AProtection Factor IP23S



Features BenefitsDual Voltage Input Power Suitable for use on 110 or 230 VACAdjustable Burn Back Control Gives precise wire burn back for diameter of wire and good re-striking capabilityReverse Polarity Facility Allows use of self shielding wires for outdoor applicationsPower Factor Correction ‘The greener option’ offers a higher output while reducing input power consumption!

Spool Gun Ready For easy aluminium welding


W1004207 20% @ 210A (230V)20% @ 140A (110V)

10 - 210A (230V)10 - 140A (110V)

435 x 266 x 617 mm 26 kg



1 23

45

6

Item Description1 Power Indicator2 Thermal Overload Indicator3 Digital Voltage Meter4 Push-Button Process Selection5 Push-Button Trigger Mode Control6 Variable Inductance Control7 Multifunction control - Infinitely

Variable Voltage / Down Slope / Arc Force Control

8 Amperage Control9 Digital Amperage Meter

78

9

I efficiency

WEL

DIN

G E

QU

IPM

ENT

18


FABRICATOR 252i1ph 230V input, 300A Compact MIG & Multiprocess Inverter15 kg Wire Spool Capacity

407002-001 (Top) Feed Roll, 0.6-1.2mm Hard Wire, 1.2mm Flux Cored Wire 36.37375832 (Top) Feed Roll, 0.8/0.9mm Flux Cored Wire 36.37407002-002 (Bottom) Feed Roll, 0.6-0.9mm Hard Wire, 0.8/0.9mm Flux Cored Wire 36.37171115-003 (Bottom) Feed Roll, 1.2mm Hard Wire 36.37170924-010 (Bottom) Feed Roll, 1.2mm Flux Cored Wire 36.37408023-002 (Top / Bottom) Feed Roll, 1.2mm Soft Wire 36.37161.550.307 Tweco TWE2.3E 250A MIG Torch, 3m 195.38W4013601 26 Tig Torch with 4m Lead 171.6310-4016 7.6m Foot Control 373.73SG200TA-25-3545 Tweco Spool Gun, 8m 707.20W4014700 Basic Utility Cart 297.00W4015001 Single Cylinder Professional Cart 354.00W4015002 Dual Cylinder Professional cart 510.00872726 Consumables Storage Box 14.00W7004930 Replacement Gas Hose 24.26


Part No. Description List Price ¤ W1004408 Fabricator 252i Compact MIG Inverter with 0.9/1.2mm and 0.6/0.9mm V groove

feed rolls, gas hose, earth cable and clamp with 50mm connections, mains cable, Tweco TWE2, 3m MIG Torch

2,138.00

Machine SpecificationsMains Input Voltage 1ph. 230V 16AWelding Current Range 5 - 300A Wire Drive Type 2 RollProtection Factor IP23S




W1004408 40% @ 250A 5 - 300A 440 x 260 x 600 mm 29.6 kg


Features BenefitsDual Voltage Input Power Suitable for use on 110 or 230 VACAdjustable Burn Back Control Gives precise wire burn back for diameter of wire and good re-striking capabilityReverse Polarity Facility Allows use of self shielding wires for outdoor applicationsPower Factor Correction ‘The greener option’ offers a higher output while reducing input power consumption!

Spool Gun Ready For easy aluminium welding

Item Description1 Power Indicator2 Thermal Overload Indicator3 Digital Voltage Meter4 Push-Button Process Selection5 Push-Button Trigger Mode Control6 Advanced Feature Button.7 Primary Function8 Adjust Weld Process9 Digital Amperage Meter

1

23

45

6

78

9

I efficiency

Feed Rolls are supplied as singles. Please order both a top and bottom feed roll

WEL

DIN

G E

QU

IPM

ENT

19

MIG (GMAW) TRANSFORMER RECTIFIER MACHINE

FABRICATOR 250C III COMPACT 3ph 400V Input, 250A Compact MIG Machine with 10 Voltage settings

2187 0.6/0.8mm Hard Wire V groove feed roll 42.952189 1.0/1.2mm Hard Wire V groove feed roll 42.952511 1.2/1.6mm Hard Wire V groove feed roll 42.952269 1.0/1.2mm Soft Wire U groove feed roll 42.952316 1.2/1.6mm Soft Wire U groove feed roll 42.952513 1.6/2.0mm Cored Wire V knurl feed roll 42.952319 1.0/1.2mm Cored Wire V knurl feed roll 42.952321 1.2/1.6mm Cored Wire V knurl feed roll 42.95WS220XE-10-3035 Tweco Weldskill 200A MIG Torch, 3m 114.66WS220XE-12-3035 Tweco Weldskill 200A MIG Torch, 3.6m 123.40


Part No. Description List Price ¤ FAB250C Fabricator 250C III Conventional MIG System with, Wheel Kit/Cylinder Tray, gas

hose, 0.8-1.0mm Feed Roll1,446.00

Machine SpecificationsMains Input Voltage 3ph. 400V Wire Feed Spped Range 1 - 19 m/min 10AOpen Circuit voltage 19.4 - 45.4V Wire Drive Type 2 RollVoltage Settings 10

Wire Diameter RangeHard Wire 0.6 - 1.6 mm

Warranty Period 2 Years Soft Wire 1.0 - 1.6 mmCored Wire 1.0 - 2.0 mm

Features BenefitsThermal Overload Protection with Indicator Alerts operator if duty cycle is exceeded or airflow is blockedStitch Timer Control Allows operator to set dedicated on/off times to produce uniform short runsSpot Timer Control Consistently timed, uniform spot welds

Item Description1 Power LED2 Wire speed selection3 Interval time selection4 Spot time selection5 Thermal Overload indicator6 Voltage control

Processes: MIG / FLUX CORED Part Number Duty Cycle @ Rated Output Output Range Dimensions (HxWxD) Weight

FAB250C 30% @ 250A 40 - 250A 800 x 380 x 870 mm 76 kg

1

2

3

4

5

6

Please note: The wire feed unit is a two roll system, therefore any one of the above drive rolls is required to make a set

Wire Feed System Specifications I efficiency

WEL

DIN

G E

QU

IPM

ENT

20


FABRICATOR 320C III COMPACT 3ph 400V Input, 340A Compact MIG Machine with 12 Voltage settings

2187 0.6/0.8mm Hard Wire V groove feed roll 42.952189 1.0/1.2mm Hard Wire V groove feed roll 42.952511 1.2/1.6mm Hard Wire V groove feed roll 42.952269 1.0/1.2mm Soft Wire U groove feed roll 42.952316 1.2/1.6mm Soft Wire U groove feed roll 42.952513 1.6/2.0mm Cored Wire V knurl feed roll 42.952319 1.0/1.2mm Cored Wire V knurl feed roll 42.952321 1.2/1.6mm Cored Wire V knurl feed roll 42.95161.560.307 Tweco TWE4.3E 400A MIG Torch, 3m 216.66161.560.407 Tweco TWE4.4E 400A MIG Torch, 4m 242.37161.560.457 Tweco TWE4.45E 400A MIG Torch, 4.5m 266.60


Part No. Description List Price ¤FAB320C Fabricator 320C III Conventional MIG System with, Wheel Kit/Cylinder Tray, gas

hose, 1.0-1.2mm Feed Rolls1,878.00

Machine SpecificationsMains Input Voltage 3ph. 400V Wire Feed Spped Range 1 - 19 m/min 10.8AOpen Circuit Voltage 18.2 - 44.9V Wire Drive Type 4 RollVoltage Settings 12




FAB320C 20% @ 340A 40 - 340A 800 x 380 x 870 mm 99 kg

Features BenefitsThermal Overload Protection with Indicator Alerts operator if duty cycle is exceeded or airflow is blockedSpot Timer Control Consistently timed, uniform spot weldsStitch Timer Control Allows operator to set dedicated on/off times to produce uniform short runsAdjustable Burn Back Control Gives precise wire burn back for diameter of wire and good re-striking capabilityTrigger Latching Facility Allows trigger to be released for continuous long weld runsElectronic feedback of wire speed Constant wire feed speedVoltage and amp meters at wfu Allows operator to see parameters at working areaPre + post gas control Allows operator to change pre + post gas times to suit applicationsInitial Speed Control Allows operator to change initial wire speed time for soft start applications

Item Description1 Thermal overload warning light2 Digital meters3 Control Knob4 Cold wire inch5 Gas purge6 Mode selector7 Secondary parameter settings button

Please note: The wire feed unit is a four roll system, therefore two of any of the above drive rolls are required to complete one set

3207

6

54

3

2

1

I efficiencyWire Feed System Specifications

WEL

DIN

G E

QU

IPM

ENT

21


FABRICATOR 320S III SEPARATE WITH WIRE FEED UNIT3ph 400V Input, 340A MIG Machine with separate wire feed unit and 12 Voltage settings


Part No. Description List Price ¤ FAB320S Fabricator 320S III Conventional MIG System with Separate Wire Feed Unit, 5m

Interconnection Cable, gas hose, 1.0-1.2mm Feed Roll, mains cable2,429.00


FAB320S 20% @ 340A 40 - 340A 1360 x 380 x 870 mm 120 kg

Features BenefitsThermal Overload Protection with Indicator Alerts operator if duty cycle is exceeded or airflow is blockedSpot Timer Control Consistently timed, uniform spot weldsStitch Timer Control Allows operator to set dedicated on/off times to produce uniform short runsAdjustable Burn Back Control Gives precise wire burn back for diameter of wire and good re-striking capabilityTrigger Latching Facility Allows trigger to be released for continuous long weld runsElectronic feedback of wire speed Constant wire feed speedVoltage and amp meters at wfu Allows operator to see parameters at working areaPre + post gas control Allows operator to change pre + post gas times to suit applicationsInitial Speed Control Allows operator to change initial wire speed time for soft start applications



3207

6

54

3

2

1

VM0393E 5m Interconnecting cable assy a/c 229.82 2269 1.0/1.2mm Soft Wire U Groove Feed Roll 42.95VM0394E 10m Interconnecting cable assy a/c 405.19 2316 1.2/1.6mm Soft Wire U Groove Feed Roll 42.952187 0.6/0.8mm Hard Wire V Groove Feed Roll 42.95 2513 1.6/2.0mm Soft Wire U Groove Feed Roll 42.952189 1.0/1.2mm Hard Wire V Groove Feed Roll 42.95 2319 1.0/1.2mm Cored Wire V Groove Feed Roll 42.952511 1.2/1.6mm Hard Wire V Groove Feed Roll 42.95 2321 1.2/1.6mm Cored Wire V Groove Feed Roll 42.95

Recommended Torches161.560.307 TWE4.3E 400A Air-Cooled MIG Torch, 3m (60% @ 340A) 216.66161.560.407 TWE4.4E 400A Air-Cooled MIG Torch, 4m (60% @ 340A) 242.37161.560.457 TWE4.45E 400A Air-Cooled MIG Torch, 4.5m (60% @ 340A) 266.60

Machine SpecificationsMains Input Voltage 3ph. 400V Wire Feed Spped Range 1 - 19 m/min 10.8VOpen Circuit Voltage 18.2 - 44.9V Wire Drive Type 4 RollVoltage Settings 12




WEL

DIN

G E

QU

IPM

ENT

22


FABRICATOR 400S III SEPARATE WITH WIRE FEED UNIT3ph 400V Input, 420A Separate MIG Machine with 20 Voltage settings, Digital Meters, micro processor control

Part No. Description List Price ¤FAB400S Fabricator 400S III 420A Separate MIG system with 1.6m interconnection,

1.0-1.2mm feed rolls, feeder wheel kit, mains cable2,595.00

VM0263E 1m Interconnecting cable assy a/c 168.73 2269 1.0/1.2mm Soft Wire U Groove Feed Roll 42.95VM0266E 5m Interconnecting cable assy a/c 240.42 2316 1.2/1.6mm Soft Wire U Groove Feed Roll 42.95VM0267E 10m Interconnecting cable assy a/c 459.22 2513 1.6/2.0mm Soft Wire U Groove Feed Roll 42.952187 0.6/0.8mm Hard Wire V Groove Feed Roll 42.95 2319 1.0/1.2mm Cored Wire V Groove Feed Roll 42.952189 1.0/1.2mm Hard Wire V Groove Feed Roll 42.95 2321 1.2/1.6mm Cored Wire V Groove Feed Roll 42.952511 1.2/1.6mm Hard Wire V Groove Feed Roll 42.95Recommended Torches161.560.307 TWE4.3E 400A Air-Cooled MIG Torch, 3m (60% @ 340A) 216.66161.560.407 TWE4.4E 400A Air-Cooled MIG Torch, 4m (60% @ 340A) 242.37161.560.457 TWE4.45E 400A Air-Cooled MIG Torch, 4.5m (60% @ 340A) 266.60


Machine SpecificationsMains Input Voltage 3ph. 400V Wire Feed Spped Range 1 - 19 m/min 13.7AOpen Circuit Voltage 19.3 - 48V Wire Drive Type 4 Roll GearedProtection factor IP 21



Features BenefitsThermal Overload Protection with Indicator Alerts operator if duty cycle is exceeded or airflow is blockedSpot Timer Control Consistently timed, uniform tack weldsStitch Timer Control Allows operator to set dedicated on/off times to produce uniform short runsAdjustable Burn Back Control Gives precise wire burn back for diameter of wire and good re-striking capabilityTrigger Latching Facility Allows trigger to be released for continuous long weld runsElectronic feedback of wire speed Constant wire feed speedVoltage and amp meters at wfu Allows operator to see parameters at working areaPre + post gas control Allows operator to change pre + post gas times to suit applicationsInitial Speed Control Allows operator to change initial wire speed time for soft start applications



4007

6

54

3

2

1


FAB400S 30% @ 420A 55 - 420A 1360 x 380 x 870 mm 133 kg


WEL

DIN

G E

QU

IPM

ENT

23


FABRICATOR 500S III SEPARATE WITH HIGH SPEED WIRE FEED UNIT3ph 400V Input, 520A separate MIG Machine with 30 Voltage settings, Digital Meters, micro processor control

Part No. Description List Price ¤ FAB500S Fabricator 500S III 520A Separate system with 1.6m interconnection A/C,

1.0/1.2 mm feed rolls, feeder wheel kit, mains cable3,256.00

A.028E Water Cooler w/flow sensor c/w fittings 800.80 1657 0.6/0.8mm Hard Wire V Groove Feed Roll 42.95VM0263E 1.6m Interconnecting cable assy a/c 168.73 2062 1.0/1.2mm Hard Wire V Groove Feed Roll 42.95VM0266E 5m Interconnecting cable assy a/c 240.42 1729 1.2/1.6mm Hard Wire V Groove Feed Roll 42.95VM0267E 10m Interconnecting cable assy a/c 459.22 1829 1.0/1.2mm Soft Wire U Groove Feed Roll 42.95VM0264E 1.6m Interconnecting cable assy w/c 197.82 2313 1.2/1.6mm Soft Wire U Groove Feed Roll 42.95VM0265E 5m Interconnecting cable assy w/c 308.36 2314 1.6/2.0mm Soft Wire U Groove Feed Roll 42.95VM0268E 10m Interconnecting cable assy w/c 510.55 2298 1.0/1.2mm Cored Wire V Groove Feed Roll 42.957-3580 Torch Coolant, 3.8l 29.90 2278 1.2/1.6mm Cored Wire V Groove Feed Roll 42.95Recommended Torches161.560.307 TWE4.3E 400A Air-Cooled MIG Torch, 3m (60% @ 340A) 216.66161.560.407 TWE4.4E 400A Air-Cooled MIG Torch, 4m (60% @ 340A) 242.37161.560.457 TWE4.45E 400A Air-Cooled MIG Torch, 4.5m (60% @ 340A) 266.60552.316.307 SW450.3F 450A Water-Cooled MIG Torch, 3m (60% @ 450A) 412.00552.316.407 SW450.4F 450A Water-Cooled MIG Torch, 4m (60% @ 450A) 440.09


Machine Specifications Mains Input Voltage 3ph. 400V Wire Feed Speed Range 1 - 25 m/min 22.5AOpen Circuit Voltage 20.2 - 59.8V Wire Drive Type 4 Roll GearedProtection factor IP 21

Wire Diameter RangeHard Wire 0.6 - 1.6mm

Warranty Period 2 Years Soft Wire 0.8 - 1.6mmCored Wire 1.0 - 2.0mm

Features BenefitsThermal Overload Protection with Indicator Alerts operator if duty cycle is exceeded or airflow is blockedSpot Timer Control Consistently timed, uniform spot weldsStitch Timer Control Allows operator to set dedicated on/off times to produce uniform short runsAdjustable Burn Back Control Gives precise wire burn back for diameter of wire and good re-striking capabilityTrigger Latching Facility Allows trigger to be released for continuous long weld runsElectronic feedback of wire speed Constant wire feed speedVoltage and amp meters at wfu Allows operator to see parameters at working areaPre + post gas control Allows operator to change pre + post gas times to suit applicationsInitial Speed Control Allows operator to change initial wire speed time for soft start applicationsWater Cooler system protection Torch wil not burn out if no water flow at coolerEasy fit water cooler Allows easy converstion from air cooled to water cooled

Item Description1 Water cooler warning light2 Thermal overload warning light3 Digital meters4 Control Knob5 Cold wire inch6 Gas purge7 Mode selector8 Secondary parameter settings button


5001

7

8

4

3

5

2

6


FAB500S 25% @ 520A 70 - 520A 1430 x 440 x 870 mm 161 kg


WEL

DIN

G E

QU

IPM

ENT

24

SYNERGIC MIG PULSE INVERTER

POWERMASTER PLUS 320SP3ph 400v Input, 320A Digital Control Synergic MIG Compact System

PowerMaster Plus

Part No. Description List Price ¤ W1000103PP 320A PowerMaster Mobile Power Source complete with 1.0mm/1.2mm

V drive rollers, gas hose, mains cable7,010.00

W4000000 Remote Control RC 20 368.41W4011601 TIG Kit 527.34W4001301 Water Recirculator 1299.96W4000300 Thermal Arc Inverter Cart 630.00Recommended Torches161.628.307 TWECO DSA MIG Digital Air Cooled Torch 400A 3m 348.35161.628.407 TWECO DSA MIG Digital Air Cooled Torch 400A 4m 384.38161.560.307 TWE4.3E 400A Air-Cooled MIG Torch, 3m (60% @ 340A) 216.66161.560.407 TWE4.4E 400A Air-Cooled MIG Torch, 4m (60% @ 340A) 242.37161.560.457 TWE4.45E 400A Air-Cooled MIG Torch, 4.5m (60% @ 340A) 266.60ML3600PM Digital Push-pull torch 8m Air Cooled 3064.88


Feed Rolls74238 0.6/0.8mm Hard Wire V Groove 40.19 74796 1.0/1.2mm Soft Wire U Groove 40.1974129 0.8/1.0mm Hard Wire V Groove 40.19 74797 1.2/1.6mm Soft Wire U Groove 40.1974109 1.0/1.2mm Hard Wire V Groove 40.19 7977734 0.8/0.9mm Cored Wire V Knurl 40.1974102 1.2/1.6mm Hard Wire V Groove 40.19 74291 1.2/1.6mm Cored Wire V Knurl 40.1974107 0.8/0.9mm Soft Wire U Groove 40.19 7977372 1.6/2.4mm Cored Wire V Knurl 40.19

Machine SpecificationsMains Input Voltage 3ph. 400V Wire Feed Speed Range 0.1 - 25 m/min 14AArc Voltage Range 15.2V - 30V Wire Drive Type 4 RollProtection factor IP 23



Features Benefits

PowerMaster Plus Increases welding speed by up to 30% Single pass butt welds possible up to 12 mm in thickness Increased penetration compared to standard systems Reduced risk of undercut

100 Programmes accessible from MIG torch Ensuring fast and flexible control

Synergic One Knob Control Arc energy matched to wire feed speed to give excellent welding conditions

Twin Pulse (pulse on pulse) welding TIG quality welds at MIG speeds ideally suited to thin gauge materialHeavy Duty, Tough Case design Enabling machine to withstand rigor of every day useMicro processor control with digital display User friendly with all parameters - programmes easily viewed High efficiency inverter design Giving precise arc characteristics at low running costs

Spatter free in majority of welding applications Less clean up time, aesthetically pleasing weld appearance

Processes: MIG / FLUX CORED / STICK Part Number Duty Cycle @ Rated Output Output Range Dimensions (HxWxD) Weight

W1000103PP 60% @ 320A / 100% @ 280A 5 - 320A 498 x 340 x 745 mm 35 kg


WEL

DIN

G E

QU

IPM

ENT

25


POWERMASTER PLUS 400SPAir Cooled System3ph 400v Input, 400A Digital Control Synergic MIG Separate System




Features Benefits






PowerMaster Plus

W4000100 Remote Control HR 911 854.52W4011600 TIG Kit 475.47W4001000 Swivel Unit 206.92W4000503 5m 70mm Air-Cooled Interconnection 535.60W4000401 10m 70mm Air-Cooled Interconnection 587.60W4000606 20m 95mm Air- and Water-Cooled Interconnection 1225.12Recommended Torches161.628.307 TWECO DSA MIG Digital Air Cooled Torch 400A 3m 348.35161.628.407 TWECO DSA MIG Digital Air Cooled Torch 400A 4m 384.38ML3600PM Digital Push-pull torch 8m Air Cooled 3064.88161.560.307 TWE4.3E 400A Air-Cooled MIG Torch, 3m (60% @ 340A) 216.66161.560.407 TWE4.4E 400A Air-Cooled MIG Torch, 4m (60% @ 340A) 242.37161.560.457 TWE4.45E 400A Air-Cooled MIG Torch, 4.5m (60% @ 340A) 266.60


Part No. Description List Price ¤ W1000303PP 400A PowerMaster Power Source Air Cooled 6,409.00W3000103 4 Roll Workshop Wire Feeder Air Cooled complete with 1.0/1.2mm V drive rollers 2,058.00W4000400 1m 70mm Air-Cooled Interconnection 270.00

BASIC PACKAGE COMPONENTS


W1000303PP 60% @ 400A / 100% @ 350A 5 - 400A 855 x 445 x 1116 mm 112 kg



WEL

DIN

G E

QU

IPM

ENT

26


POWERMASTER PLUS 400SPWater Cooled System3ph 400v Input, 400A Digital Control Synergic MIG Separate System




Features Benefits






PowerMaster Plus

W4000100 Remote Control HR 911 854.52W4011600 TIG Kit 475.47W4001000 Swivel Unit 206.92W4000503 5m 70mm Water-Cooled Interconnection 535.60W4000501 10m 70mm Water-Cooled Interconnection 609.44W4000606 20m 95mm Water-Cooled Interconnection 1225.127-3580 Torch Coolant, 3.8l 29.90Recommended Torches160.620.307 TWECO DSW MIG Digital Water Cooled Torch 500A 3m 540.54160.620.407 TWECO DSW MIG Digital Water Cooled Torch 500A 4m 589.68MW5400PM Digital Push-pull torch 8m Water Cooled 3,147.04W4001500 Push-Pull Control Board 308.99552.316.307 SW450.3F 450A Water-Cooled MIG Torch, 3m (60% @ 450A) 412.00552.316.407 SW450.4F 450A Water-Cooled MIG Torch, 4m (60% @ 450A) 440.09


Part No. Description List Price ¤ W1000203PP 400A PowerMaster Power Source with Integrated Water Cooler 6,974.00W3000203 4 Roll Workshop Wire Feeder Water Cooled complete with 1.0/1.2mm V drive rollers 2,187.00W4000500 1m 70mm Water-Cooled Interconnection 279.00



W1000203PP 60% @ 400A / 100% @ 350A 5 - 400A 855 x 445 x 1116 mm 112 kg



WEL

DIN

G E

QU

IPM

ENT

27


POWERMASTER PLUS 500SPWater Cooled System3ph 400v Input, 500A Digital Control Synergic MIG Separate System




Features Benefits






PowerMaster Plus

W4000100 Remote Control HR 911 854.52W4011600 TIG Kit 475.47W4001000 Swivel Unit 206.92W4000607 5m 95mm Water-Cooled Interconnection 579.28W4000601 10m 95mm Water-Cooled Interconnection 638.56W4000606 20m 95mm Water-Cooled Interconnection 1225.127-3580 Torch Coolant, 3.8l 29.90Recommended Torches160.620.307 TWECO DSW MIG Digital Water Cooled Torch 500A 3m 540.54160.620.407 TWECO DSW MIG Digital Water Cooled Torch 500A 4m 589.68MW5400PM Digital Push-pull torch 8m Water Cooled 3,147.04


Part No. Description List Price ¤ W1000503PP 500A PowerMaster Power Source with Integrated Water Cooler 9,847.00W3000203 4 Roll Workshop Wire Feeder Water Cooled complete with 1.0/1.2mm V drive rollers 2,187.00W4000600 1m 95mm Water-Cooled Interconnection 319.00



W1000503PP 100% @ 500A 5 - 500A 855 x 445 x 1116 mm 121 kg



WEL

DIN

G E

QU

IPM

ENT

28


POWERMASTER PLUS 400SP ROBOTIC PACKAGEWater Cooled System3ph 400v Input, 400A Digital Control Synergic MIG Separate System with integrated cooler, remote control pendant HR911, 42 pin 10m robot interface cable




Features Benefits





W4000100 Remote Control HR 911 854.52W4000800 42 pin plug for robot interface cable 273.85W4000700 10m robot control cable (includes W4000800) 664.217-3580 Torch Coolant, 3.8l 29.90


Part No. Description List Price ¤

W1000403PP 400A PowerMaster Power Source with Integrated Water Cooler, Remote Control Pendant HR911, 42 pin 10m Robot Interface Cable 12,496.00

W3000303 4 Roll SP4000R Wire Feeder Water Cooled complete with 1.0/1.2mm V drive rollers 1,784.00W4000502 10m 70mm Water-Cooled Robotic Interconnection 619.00



W1000403PP 50% @ 400A / 100% @ 320A 5 - 400A 855 x 445 x 1116 mm 112 kg


PowerMaster Plus


WEL

DIN

G E

QU

IPM

ENT

29


POWERMASTER PLUS 500SP ROBOTIC PACKAGEWater Cooled System3ph 400v Input, 500A Digital Control Synergic MIG Separate System with integrated cooler, remote control pendant HR911, 42 pin 10m robot interface cable




Features Benefits





W4000100 Remote Control HR 911 854.52W4000800 42 pin plug for robot interface cable 273.85W4000700 10m robot control cable (includes W4000800) 664.217-3580 Torch Coolant, 3.8l 29.90



W1000603PP 500A PowerMaster Power Source with Integrated Water Cooler, Remote Control Pendant HR911, 42 pin 10m Robot Interface Cable 13,486.00

W3000303 4 Roll SP4000R Wire Feeder Water Cooled complete with 1.0/1.2mm V drive rollers 1,784.00W4000602 10m 90mm Water-Cooled Robotic Interconnection 666.00



W1000603PP 60% @ 500A / 100% @ 400A 5 - 500A 855 x 445 x 1116 mm 121 kg


PowerMaster Plus


WEL

DIN

G E

QU

IPM

ENT

30

DIGITAL TORCHES - DSA.40

AIR COOLED

Part No. Description List Price ¤ 161.628.307 TWECO DSA MIG Digital Air Cooled Torch 400A 3m 348.35161.628.407 TWECO DSA MIG Digital Air Cooled Torch 400A 4m 384.38

ML3600PM Push Pull Torch 8m Air Cooled 3064.88This torch includes all boards and sockets required to fit to the Powermaster machines

Standard Consumables

Conductor Tube116103510 Conductor Tube with Insulator 20.80

Nozzles23-50 Insulated Fixed Nozzle 12.7mm 10.2423-62 Insulated Fixed Nozzle 15.9mm (fitted as standard) 10.2423-75 Insulated Fixed Nozzle 19.1mm 10.24

Contact Tips14H-35 Contact Tip 0.8mm 1.1614H-40 Contact Tip 1.0mm 1.1614H-45 Contact Tip 1.2mm 1.1614H-52 Contact Tip 1.3mm (fitted as standard) 1.1614H-116 Contact Tip 1.6mm 1.16

Diffusers54A Gas Diffuser 4.27

Liners134090402 4m Liner for all wires 1.2-1.6mm Carbo (supplied as standard) 14.54S129.5.44.115 Liner Guide, 115mm 10.30

by

WEL

DIN

G E

QU

IPM

ENT

31

DIGITAL TORCHES - DSW.300 / DSW 450

WATER COOLEDPart No. Description List Price ¤

160.610.307 TWECO DSW MIG Digital Water Cooled Torch 300A 3m 453.18160.610.407 TWECO DSW MIG Digital Water Cooled Torch 300A 4m 496.86160.620.307 TWECO DSW MIG Digital Water Cooled Torch 500A 3m 540.54160.620.407 TWECO DSW MIG Digital Water Cooled Torch 500A 4m 589.68

MW5400PM Push Pull Torch 8m Water Cooled 3147.04This torch includes all boards and sockets required to fit to the Powermaster machines

Standard Consumables

Conductor TubeSW63-50 Conductor Tube Assembly (300A) 110.47116116104 Conductor Tube Assembly (500A) 107.24

Nozzles300ASW23-15 15mm Nozzle (fitted as standard) 9.09SW23-12 12mm Nozzle 9.09SW23-18 18mm Nozzle 9.09500ASW24-17 Nozzle (500A) (fitted as standard) 9.84SW24-15 15mm Nozzle 9.84SW24-21 21mm Nozzle 9.84

Contact Tips300A14H-35 Contact Tip 0.8mm 1.1614H-40 Contact Tip 1.0mm 1.1614H-45 Contact Tip 1.2mm 1.1614H-52 Contact Tip 1.3mm (fitted as standard) 1.16500A16S-35 Contact Tip 0.8mm 2.2316S-40 Contact Tip 1.0mm 2.2316S-45 Contact Tip 1.2mm 2.2316S-52 Contact Tip 1.3mm (fitted as standard) 2.2316S-116 Contact Tip 1.6mm 2.2316S-564 Contact Tip 2.0mm 2.23

DiffusersSW53-14 Diffuser (300A) 8.42SW54-16S Diffuser (500A) 8.31

Liners134090402 4m Liner for all wires 1.2-1.6mm Carbo (supplied as standard) 14.54S129.5.44.115 Liner Guide, 115mm 10.30

by

WEL

DIN

G E

QU

IPM

ENT

32

TIG (GTAW) INVERTER

ARCMASTER 400 MST3ph 380/415V Input, 400A Multi Process Inverter with MIG, Lift Tig and Stick facility

10-2007 Remote Foot control 7.6m lead and plug 474.0910-2005 Remote Hand Pendant 7.6m lead and plug 665.0010-2096 14 Pin Plug for Remote or TIG Torch Button 68.9010-2097 Cable Clamp for 14 Pin Plug 11.53CART.2 ArcMaster 3.1 Workshop Cart 286.00WC.ARCM3.1 ArcMaster Cooler 1346.00TIG/HF400A 400A TIG HF Box 2559.44


Part No. Description List Price ¤ 10-3089 TA 400 MST 400 Amp DC CC/CV Multi Process Inverter 4,205.00


Item Description1 VRD- (Voltage Reduction Device) lights indicate on or off2 STICK/MIG Parameters - Pressing this button scrolls through the

STICK functions or MIG functions3 Digital LED display - welding amperage and voltage or parameter

values are displayed in these windows. Internal warnings are signalled to the operator

4 Save/Load Buttons - By using the Save & Load buttons the operator can easily save up to 5 welding programmes

5 Control knob - allows the operator voltage within the entire range of the power source, also used to set each parameter value

6 Process functions - pressing this button scrolls through the output process modes (STICK, Lift TIG, MIG)

7 Remote current function - pressing this button enables remote current8 Remote contactor function - pressing this button enables remote

contactor one or off



featuresLift Start TIG Provides TIG arc starting without use of high frequencyHot Start For STICK welding - Provides ease of arc starts

6

8

73 4 5

1

2


10-3089 25% @ 400A 5 - 400A 420 x 210 x 450 mm 25 kg

I efficiency

WEL

DIN

G E

QU

IPM

ENT

33

WORKSHOP CARTS

ARCMASTER 3.1 SERIES CART

Cat. No. CART.2 List Price - ¤286.00

Designed for Arcmaster 400TS, 400MST and 300 AC/DCFits Power Source only or Power Source and Cooler

POWERMASTER 320SP TROLLEY

Cat. No. W4000300 List Price - ¤630.00

Designed for Powermaster 320SPFits Power Source only or Power Source and Cooler

WEL

DIN

G E

QU

IPM

ENT

34

WORKSHOP CARTS

3 IN 1 SERIES SINGLE CYLINDER CART


Designed for Fabricator 211i and 252i, with 1 gas cylinder attached.Includes storage draw at the front of the cart, and 1 toolbox for consumables storage which slots into the side of the cart.

Spare Consumables boxCat. No. 872726 List Price - ¤14.00

3 IN 1 SERIES DUAL CYLINDER CART


Designed for Fabricator 211i and 252i, with 1 gas cylinder attached.Includes storage draw at the front of the cart, and 1 toolbox for consumables storage which slots into the side of the cart.

Spare Consumables boxCat. No. 872726 List Price - ¤14.00

3 IN 1 SERIES UTILITY CART Cat. No. W4014700 List Price - ¤297 Suitable for Fabricator 181i, 211i and 252i, as well as most small welding or cutting inverters.

ROLL CAGE

Cat. No. W4015104 List Price - ¤97.00Suitable for Fabricator 211i

Cat. No. W4015101 List Price - ¤97.00Suitable for Fabricator 252i

PLA

SM

A C

UTT

ING

EQ

UIP

MEN

T

35

PLASMA CUTTING SYSTEM

DRAG-GUN PLUS1ph, 50/60Hz, 230V Input / 35A Output.9mm Genuine Cut Capacity, Integrated CompressorI efficiency = 18A

Part No. Description List Price ¤ 1-3835-4 Drag-Gun Plus

Includes Power Supply, PCH-42ER Torch with 6.1m leads, Mains Cable, Work Cable & Clamp, Spare Parts Kit

2,324.00

1-3835-4F Drag-Gun Plus (fitted with Air Dryer Kit for environments with high humidity or fluctuating temperatures)Includes Power Supply, PCH-42ER Torch with 6.1m leads, Mains Cable, Work Cable & Clamp, Spare Parts Kit

2,448.00

FeaturesBuilt in air compressor brings maximum convenience and portabilityReady to cut right out of the box - just plug it inPowerful performanceMaximum Arc visibility for excellent operator control2 Year Warranty Machine / 1 Year Warranty Torch

System SpecificationsCut Capacity Input Output Duty Cycle Dimensions (HxWxD) Weight

Genuine Cut: 9 mm 1ph, 230V, 50/60Hz, 18A 15 - 35A 35% @ 35A 279 x 267 x 394 mm 25.7 kg

REPLACEMENT TORCH AND PARTS Pack Qty7-4220 PCH-42ER (70o) Hand Torch and Lead package 6.1m 1 544.639-8442 70o Torch Head 1 269.069-6501 Tip - 35A 10 4.159-6542 SureLok Electrode 5 6.809-6507 Gas Distributor 1 12.149-6003 Shield Cup - Heavy Duty 1 19.01

OPTIONS AND ACCESSORIES3-3837 Air Dryer Kit 351.007-7501 Cutting Guide Kit 103.719-1260 Leather Leads Cover 104.01

System with Air-Dryer KitStandard System

PLA

SM

A C

UTT

ING

EQ

UIP

MEN

T

36


CUTMASTER 12 PLUS1ph, 50/60Hz, 110 / 230V Input / 40A Output.12mm Genuine Cut CapacityI efficiency - 230V = 13.5A 110V = 16.3A

Part No. Description List Price ¤ 1-4200-4 Cutmaster 12 Plus

Includes Power Supply, SL40TM Torch with 4.5m leads, Mains Cable, Work Cable & Clamp, Spare Parts, Carry Bag, Gloves, Cutting Glasses.

1,550.00


Genuine Cut: 12 mm (230V)Genuine Cut: 8 mm (110V)

1ph, 110 / 230V, 50/60Hz, 16A

40A (230V)27A (110V)

40% @ 40A (230V)30% @ 27A (110V)

228 x 117 x 470 mm 11.8kg

REPLACEMENT TORCH AND PARTS Pack Qty

7-0040 SL40, (75o) Hand Torch and Lead package, 4.5m with ATC Connector 1 312.70

9-0091 Drag Tip - 20-35A (recommended for 110V) 5 3.559-0093 Drag Tip - 40A 5 3.559-0094 Standard Cutting Tip - 40A 5 3.559-0096 Electrode 5 5.129-0097 Start Cartridge 1 16.889-0098 Shield Cup 1 15.029-0090 Standoff Guide (SL40) 1 18.67

FeaturesAutomatic voltage selection to 110V / 230V input powerLighter weight design for maximum portabilityNew SL40 Torch features excellent arc visibility3 Year Warranty Machine / 1 Year Warranty TorchSL40 Torch with Vent2Shield ( ) technology allows the use of smaller compressors compared to similar 40 Amp units.Surelok® electrode eliminates tip wobble found in some blow-apart torch designs, resulting in a cleaner arc and longer parts lifePrecision-engineered consumable parts are easy to change and require no toolsEasy-to-use torch trigger release and ergonimic handle provide comfort during long cutting sessions

SL40 Torch features

Minimises gas consumptionby recycling wasted vent gasas shield gas


PLA

SM

A C

UTT

ING

EQ

UIP

MEN

T

37


CUTMASTER 123ph, 50/60Hz, 400V Input / 40A Output.12mm Genuine Cut CapacityI efficiency = 5A

Part No. Description List Price ¤ 1-5130-4 Cutmaster 12 - 6.1m torch leads with ATC Connector 2,448.00

1-5131-4 Cutmaster 12 - 15.2m torch leads with ATC Connector 2,632.00

Includes Power Supply, SL60TM Torch with 6.1m or 15.2m leads, Mains Cable, Work Cable & Clamp, Spare Parts


Genuine Cut: Maximum Cut: Severance:

12mm15mm20mm

3ph, 400V, 50/60Hz, 8A

40 Amps 60% @ 40A 381 x 305 x 610 mm 19.5kg



9-8219 75o Torch Head 1 288.879-8207 Drag Tip - 40A 5 5.929-8208 Standard Cutting Tip - 40A 5 5.929-8215 Electrode 5 8.539-8213 Start Cartridge 1 24.829-8218 Standard Shield Cup 1 22.08

FeaturesFront Panel LED’s indicate status conditions for maximum efficiencyTrigger latch feature prevents hand fatigue during long cuts. Auto pilot restart instantly re-ignites the pilot arc while cutting expanded metalsTrue Guard roll bar provides easy transportation and protection for unmatched durabilityLighter weight design for maximum portabilityStorage compartment for convenient access to spare parts and consumablesVersatile 1Torch with ATC disconnect makes it easy to add lead extensions offering a combined extension and lead length of up to 30.5m3 Year Warranty Machine / 1 Year Warranty Torch

For the full range of 1Torch consumables and torches, please refer to pages 43 and 44

OPTIONS AND ACCESSORIES7-7507 Air Filter Kit 123.759-7741 Replacement Filter Cartridge 45.957-7501 Basic Cutting Guide Kit 103.717-8910 Cutting Guide Kit Deluxe 247.067-8888 Multi-Purpose Cart 282.887-8911 Straight Line Cutting Guide 258.709-1260 Leather Lead Cover 6.1m 104.019-1280 Leather Lead Cover 15.2m 207.99

PLA

SM

A C

UTT

ING

EQ

UIP

MEN

T

38








20mm25mm32mm

3ph, 400V, 50/60Hz, 16A

60 Amps 40% @ 60A 381 x 305 x 610 mm 19.5kg



9-8219 75o Torch Head 1 288.879-8252 Drag Tip - 60A 5 7.979-8210 Standard Cutting Tip - 60A 5 5.929-8215 Electrode 5 8.539-8213 Start Cartridge 1 24.829-8218 Standard Shield Cup 1 22.08

FeaturesFront Panel LED’s indicate status conditions for maximum efficiencyTrigger latch feature prevents hand fatigue during long cuts. Auto pilot restart instantly re-ignites the pilot arc while cutting expanded metalsTrue Guard roll bar provides easy transportation and protection for unmatched durabilityLighter weight design for maximum portabilityStorage compartment for convenient access to spare parts and consumablesVersatile 1Torch with ATC disconnect makes it easy to add lead extensions offering a combined extension and lead length of up to 30.5m3 Year Warranty Machine / 1 Year Warranty Torch



PLA

SM

A C

UTT

ING

EQ

UIP

MEN

T

39








25mm30mm38mm

3ph, 400V, 50/60Hz, 20A

80 Amps 40% @ 80A 381 x 305 x 610 mm 19.5kg



9-8219 75o Torch Head 1 288.879-8211 Standard Cutting Tip - 80A 5 5.929-8215 Electrode 5 8.539-8213 Start Cartridge 1 24.829-8218 Standard Shield Cup 1 22.08

FeaturesFront Panel LED’s indicate status conditions for maximum efficiencyTrigger latch feature prevents hand fatigue during long cuts. Auto pilot restart instantly re-ignites the pilot arc while cutting expanded metalsTrue Guard roll bar provides easy transportation and protection for unmatched durabilityTip SaverTM current fold back circuit design prevents tip failure when the tip touches the work piece at high output current levels resulting in prolonged consumable parts lifeLighter weight design for maximum portabilityStorage compartment for convenient access to spare parts and consumablesVersatile 1Torch with ATC disconnect makes it easy to add lead extensions offering a combined extension and lead length of up to 30.5m3 Year Warranty Machine / 1 Year Warranty Torch



PLA

SM

A C

UTT

ING

EQ

UIP

MEN

T

40








35mm40mm45mm

3ph, 400V, 50/60Hz, 27A

100 Amps 80% @ 100A 381 x 305 x 762 mm 28.1kg







PLA

SM

A C

UTT

ING

EQ

UIP

MEN

T

41








40mm50mm55mm

3ph, 400V, 50/60Hz, 32A

120 Amps 40% @ 120A 381 x 305 x 762 mm 28.1kg







PLA

SM

A C

UTT

ING

EQ

UIP

MEN

T

42


PAK-2003ph, 50/60Hz, 400V Input / 35 - 200A Output.40mm Genuine Cut Capacity

Part No. Description List Price ¤ 1-1541 PAK-200 - complete system with 70° torch and 7.6m Leads 20,800.00

1-1542 PAK-200 - complete system with 70° torch and 15.2m Leads 21,320.00

3-0005 PAK-200 - Power Source without Torch 19,400.00

Includes Power Supply, Ground Cable & Clamp and Coolant - (Note: spare parts are not included)


Genuine Cut: Maximum Cut: Max. Pierce:

40mm70mm35mm

3ph, 400V, 50/60Hz, 77A

35 - 200 Amps

100% @ 200A 1238 x 700 x 978 mm 221 kg

TORCH AND LEADS PACKAGES2-0009 70° torch with 7.6m Leads 1969.272-0010 70° torch with 15.2m Leads 2443.662-0015 180° torch with 7.6m Leads 2323.152-0016 180° torch with 15.2m Leads 2598.96

FeaturesUp to 200 amps output for faster cuts100% duty cycle at 200 ampsEnergy efficient inverter technologyDual gas capability for significant improvement in cut quality controlMaximumLife® PartsExclusive Tip Saver™ CircuitSmart Start™ auto pilot restartSmart Logic™ over voltage protection

OPTIONS AND ACCESSORIES7-7505 Circle Cutting Attachment 136.509-2146 Plasma Supply Hose, 3m 91.249-2147 Secondary Supply Hose, 3m 61.257-3460 Remote Pendant Control 207.40

TORCH PARTS AND ACCESSORIES32-1325 Shield Cup, Standard 50.75 32-1515 Tip (0.171) Gouging 25.3832-1326 Crown Shield Cup (manual cutting) 57.37 32-1315 Gas Distributor, Cutting 36.4132-1527 Shield Cup Gouging 56.26 32-1509 Gas Distributor, Gouging 71.7132-1323 Tip, 200A 8.83 32-1310 Electrode, Air Cutting 13.2432-1330 Tip, 150A 8.83 32-1311 Electrode, Multi-Gas Cutting 13.2432-1321 Tip, 70A 8.83 32-1504 Electrode, Air, Gouging 39.7232-1322 Tip, 55A 8.83 32-1505 Electrode, ArH2, Gouging 42.0032-1320 Tip, 35A 8.83 32-1502 Coolant Tube Extension, Gouging 20.9732-1512 Tip (0.110) Gouging 25.38 20-0001 Wrench 47.4332-1513 Tip (0.125) Gouging 25.38 8-4025 O-Ring Lubricant 6.6132-1514 Tip (0.156) Gouging 25.38 9-4173 Parts Box 52.96

7-3580 Torch Coolant, 3.8l 29.90

PLA

SM

A C

UTT

ING

EQ

UIP

MEN

T

43

PLASMA CUTTING TORCHES

1TORCHTM

SL60TM and SL100TM Torches


STANDARD RPT TORCHES (O2B)(Torches suitable for fitting to competitor systems or older Thermal Dynamics systems using a torch adaptor kit)7-5200 SL60TM 80 Amp 75o 6.1m 455.857-5201 SL60TM 80 Amp 75o 15.2m 586.487-5202 SL100TM 120 Amp 75o 6.1m 455.857-5203 SL100TM 120 Amp 75o 15.2m 586.48

TORCHES WITH ATC (ADVANCED TORCH CONNECTOR)(Torches fitted with ATC for connection to a Cutmaster TRUE or Cutmaster 1Series system, or for other systems if used with a torch adaptor kit and ATC adaptor kit)7-5204 SL60TM 80 Amp 75o 6.1m ATC 521.167-5205 SL60TM 80 Amp 75o 15.2m ATC 717.107-5206 SL100TM 120 Amp 75o 6.1m ATC 521.167-5208 SL100TM 120 Amp 75o 15.2m ATC 717.09

Hand Cutting Torches

Mechanised Cutting Torches

STANDARD RPT TORCHES (O2B)(Torches suitable for fitting to competitor systems or older Thermal Dynamics systems using a torch adaptor kit)7-5209 SL100TM 120 Amp 180o 7.6m with fibreglass tube and rack 510.217-5210 SL100TM 120 Amp 180o 15.2m with fibreglass tube and rack 612.49

TORCHES WITH ATC (ADVANCED TORCH CONNECTOR)(Torches fitted with ATC for connection to a Cutmaster TRUE or Cutmaster 1Series system, or for other systems if used with a torch adaptor kit and ATC adaptor kit)7-5215 SL100TM 120 Amp 180o 7.6m ATC with fibreglass tube and rack 726.677-5216 SL100TM 120 Amp 180o 15.2m ATC with fibreglass tube and rack 856.68

ATC Adaptors and Extensions

7-5207 ATC Receptacle Adapter 113.94This receptacle adapter is required for each power supply using an ATC torch connection. This is connected to the torch adapter kit specific to each power supply

7-7544 ATC Lead Extension 4.6m 267.147-7545 ATC Lead Extension 7.6m 314.547-7552 ATC Lead Extension 15.2m 599.037-3460 Remote Pendant Control 207.40

PLA

SM

A C

UTT

ING

EQ

UIP

MEN

T

44

PLASMA CUTTING TORCHES

CurrentRange

Mode OfOperation

StartCartridge TipAmps Electrode Shield Cup

BodyDrag Shield

CupGouging

Shield Cap ELECTRODE START TIP SHEILD SHEILD DRAG DEFLECTOR GOUGING CARTRIDGE CUP CUP BODY SHIELD CAP SHIELD CAP

1Torch Consumables 1Torch Repair Parts

Part No. Description PackQty

ListPrice ¤

Part No. Description ListPrice ¤

9-8205 Tip, Cutting, 20A, Drag 5 5.92 9-8219 SL60/SL100 75o Torch Head 288.879-8206 Tip, Cutting, 30A, Drag 5 5.92 4-7830 SL60 Hand Leads Package (O2B), 6.1m 290.139-8207 Tip, Cutting, 40A, Drag 5 5.92 4-7832 SL100 Hand Leads Package (O2B), 6.1m 290.139-8208 Tip, Cutting, 40A 5 5.92 4-7833 SL100 Hand Leads Package (O2B), 15.2m 422.019-8209 Tip, Cutting, 50/55A 5 5.92 4-7834 SL60 Hand Leads Package (ATC), 6.1m 320.279-8210 Tip, Cutting, 60A 5 5.92 4-7835 SL60 Hand Leads Package (ATC), 15.2m 458.429-8211 Tip, Cutting, 80A 5 5.92 4-7836 SL100 Hand Leads Package (ATC), 6.1m 320.279-8212 Tip, Cutting, 90/100A 5 5.92 4-7837 SL100 Hand Leads Package (ATC), 15.2m 332.83

9-8213 Start Cartridge 1 24.82 9-7030 SL60/SL100 75o Torch Handle Kit 61.549-8215 Electrode, MaximumLife® 5 8.53 9-7031 SL60/SL100 Switch Assembly 25.059-8218 Standard Shield Cup 1 22.08 9-7034 SL60/SL100 Torch Trigger Assembly 35.179-8225 Tip, Gouging, 40A 5 7.229-8226 Tip, Gouging, 60A 5 7.229-8227 Tip, Gouging, 80A 5 7.229-8228 Tip, Gouging, 100A 5 7.229-8254 Tip, Gouging, 120A 5 7.239-8231 Tip, Cutting, 70A 5 5.929-8253 Tip, Cutting, 120A 5 6.079-8252 Tip, Drag, 60A 5 7.979-8235 Shield Cap, Drag, 50-60A 1 13.809-8236 Shield Cap, Drag, 70-100A 1 13.809-8258 Shield Cap, Drag, 120A 1 13.819-8237 Shield Cup body, MaximumLife® 1 46.659-8238 Shield Cap, Machine, 50-60A 1 13.279-8239 Shield Cap, Machine, 70-100A 1 13.279-8241 Shield Cap, Gouging 1 13.809-8243 Shield Cap, Deflector 1 15.619-8251 Standoff Cutting Guide (40-60A) 1 22.149-8281 Standoff Cutting Guide (60-120A) 1 22.149-8224 Ohmic Clip (Machine Cutting) 1 26.92

Cutmaster TRUE Standoff Cutting Guides9-8281 - 60-120A 9-8251 - 40-60A

PLA

SM

A C

UTT

ING

EQ

UIP

MEN

T

45

ELECTRODE START TIP SHEILD SHEILD DRAG DEFLECTOR GOUGING CARTRIDGE CUP CUP BODY SHIELD CAP SHIELD CAP

TORCH ADAPTOR KITS

Power Source Model Adaptor Kit

ListPrice ¤

Power Source Model Adaptor Kit ListPrice ¤

HYPERTHERM® MACHINES WITH STANDARD EURO STYLE CONNECTIONPowermax® 380 7-3477 (Most European systems from the following manufacturers)Powermax® 600 w/Int. Q.D. 7-3480 LINCOLN, EWS, CASTOLIN,

7-3470ELPowermax® 800 / 900 7-3481 CEBORA, SELCO, CEMONT, Powermax® 1100 7-3455 HELVI, CEA, STEL, CIFI,Powermax® 1650 7-3483 FRIMAR, JACKLE, TRAFIMET, Max® 42 / 43 / 40cs 7-3454Max® 40 / HT40 (HF Start) 7-3430Max® 70 / 80 / 100 7-3430ESAB®

CaddyCut, PCM-SMi, 500i, 625i, PCS-43, HandyPlasma 50 7-3425PCS-53, 80, 90 7-3435ESP-100i, LPH 120 7-3426LPH 50/80, PCM-750i, 875, 1000i, 1125, HandyPlasma 70 7-3429CEBORA®

Prof 36, 52, 70 7-3471ELSAF®

Zip 1.0, 2.0, 3.0, 4.0, Prestozip 615, Prestozip 2, Nertazip 215, 525/225, 540 Z1.0, Z2.0, Z3.0, CP40R, CP100R

7-3471EL

Miller®

*Plazcut 60/Zipcut 7-3432Spectrum 250D, 500, 750 7-3433Spectrum 700, 1000, 1250, PLUS 7-3430Spectrum 3080 7-3456Spectrum 701, 2050, 650 7-3457Spectrum 300 7-3476Spectrum 375 7-3477OERLIKON®

CITOARC AP15-1, AP25-2, AP217, AP225 7-3471ELTHERMAL DYNAMICS®

PAK® 3XR, 5XT, 5XR, 6XR, 7XR, 625XR, 750XR 7-3446PAK® 8XR, 10XR, 1000XR, 1250XR, PakMasterTM 75, 100 7-3434PakMasterTM 50XL/XLP, 75XL/XL+, 100XL/XL+CUTMASTERTM 50, 75, 80XL, 100

7-3447

PakMasterTM 25, 38XL, EconoPAK® 25 Drag-Gun® 38, PAK® 4Xi, 6Xi, 2XT-220, Dynapak® 110

7-3443

PakMasterTM 50 w/ Smart Torch 7-3445EconoPAK® 50 7-3449EconoPAK® 100 7-3450PAK® 5 7-3444PAK® 10 7-3436

NOTES:Torch adaptor kits are used to connect the Victor® Thermal Dynamics® 1Torch to older Thermal Dynamics systems and also to competitor systems, giving you the potential to upgrade an older system with a brand new cutting torch with easily-available, high quality consumable parts.

To determine the corect adaptor kit, you will need to know the make and model of the plasma cutting system. If your system is not listed here, please contact us directly and we will determine the correct adaptor.

Please note, the maximum current output of some of the Power Supplies listed can exceed the maximum rating of the torch. Do not operate the selected RPT Replacement Torch at current levels above the rating of the torch.

Each Adapter Kit includes connection fitting, electrical connectors and installation instruction sheets for the selected power supply.

CEBORA is a registered trademark of Cebora S.p.A.;ESAB is a registered trademark of ESAB AB; LINCOLN is a registered trademark of Lincoln Electric Co.; HYPERTHERM, Max and Powermax are registered trademarks of Hypertherm, Inc.; MILLER and Spectrum are registered trademarks of Miller Electric Mfg. Co.; THERMAL DYNAMICS, PAK, CUTMASTER, PakMaster, EconoPAK, Dynapak and Drag-Gun are registered trademarks of Victor Technologies.

*The Miller PlazCut machines with Serial Numbers beginning JE are not compatible with 1TorchTM RPT Torches.

PLA

SM

A C

UTT

ING

EQ

UIP

MEN

T

46

ACCESSORIES

TORCH CUTTING GUIDE KITS

Cutting Guide Kit (Deluxe)Cat. No. 7-8910 List Price - ¤247.06PCH 10,25,26,28,35,40,42,60,62,75,76,80,100XL,102, RPT 28, 100R(ER),1Torch Cuts circles from 54mm to 1054mm with proper cutting attachments.This kit includes easy add-on attachments to fit most Victor® Thermal Dynamics® torches for precise straight line, circle cutting and bevelling. Includes Carrying Case, Radius/Roller Kit (7-7501), Circle Cutting Guide Kit (7-3291), Magnetic Pivot, Suction Pivot.

Circle Cutting Guide KitCat. No 7-3291 List Price - ¤146.73PCH 10,25,26,28,35,40,42,60,62,75,76,80,100XL,102, RPT 28, 100R(ER), 1TorchCuts 54mm to 705mm circles (using magnetic attachment) when cutting or bevelling is required. For use with most Victor® Thermal Dynamics® torches. Guide shown with optional pivot (7-3148).

Radius / Roller Cutting Guide KitCat. No. 7-7501 List Price - ¤103.71PCH 10,25,26,28,35,40,42,60,62,75,76,80,100XL,102, RPT 28, 100R(ER) 1Torch (not circles only radius) This easy-to-use guide cut circles from 76mm up to 730mm. Maintains a consistent height off the work piece whether you are using the circle cutting attachment for cutting circles or the roller guide feature to improve your straight line cutting.Both novices and experts will see noticeable improvement in quality, speed and parts life. Can be used with most Victor® Thermal Dynamics® torches.

Straight Line Cutting GuideCat. No 7-8911 List Price - ¤258.70Introducing a new cutting guide accessory suitable for all hand torches, PCH-10 through PCH-102 and the 1Torch. This versatile, straight line cutter is for hand held systems and it cuts vertical, 90o, or bevel cuts. Its consistent standoff improves cut quality and maximises overall performance. Produces more efficient straight line cuts

Lightweight, minimum set up time and no power required. Magnetic mounts ensure placement and ease of use. Optional suction plates available for nonmagnetic applications (i.e. aluminium and stainless steel). The Cutting Guide Kit includes: 1.2m standard rail Torch Holder and Busing Heavy Duty Magnets (2 ea.) Slide Assembly Wheels and Fasteners. Optional 1.2m extensions (9-7971) available.

SL40 Adaptor (Bushing)Cat. No 7-2915 List Price - ¤12.95This adaptor bushing allows the new SL40 torch to be used with Victor® Thermal Dynamics® torch cutting guide kits. Please order this part when ordering a cutting guide kit to be used with th SL40 torch. (Torch supplied with Victor® Thermal Dynamics® Cutmaster 12+ and CutSkill 35A systems.)

PLA

SM

A C

UTT

ING

EQ

UIP

MEN

T

47

ACCESSORIES

MISCELLANEOUS TORCH ACCESSORIES

ATC™ Lead Extensions

4.6m (15 ft.) 7-7544 List Price - ¤267.147.6m (25 ft.) 7-7545 List Price - ¤314.5415.2m (50 ft.) 7-7552 List Price - ¤599.03

Available for any system using 1Torch with ATC Quick Disconnect. Leads Extensions enable you to customise your lead length to suit the cutting job up to 30.5m.

Trigger Guard Kit1Torch (SL60 & SL100)

Cat No. 9-8420 - Short Trigger Guard List Price - ¤27.53

This guard offers additional protection from accidental activation or damage to the torch switch.

Remote Pendant Control

Cat No. 7-3460 - 6.1m (20 ft.) List Price - ¤207.40

Remote Pendant Control for mechanised applications.Hand Pendant Extension

Cat No. 7-7744 - 7.6m (25 ft.) List Price - ¤149.05

Extension cable for 7-3460 Remote Pentant Control

Air Filter KitFor improved consumable parts life and overall performance, Victor TechnologiesTM recommends Air Filter Kits be used on all plasma cutting systems.

Single Stage Air Filter Kit Cat. No. 7-7507 List Price - ¤123.75(Includes Filter Body 9-7740, Hose 9-7742, Filter Element 9-7741)

For use with shop compressed air systems, this in-line filter will not allow moisture or water to pass through the filter element even if it becomes completely saturated. This hi-tech filter element actually blocks the absorption of water to increase performance and improve consumable parts life.

Two Stage Air FiltersCat. No. 9-9387 List Price - ¤128.69For CutmasterTM TRUE

The Two Stage Air Filter will remove moisture and contaminants fromthe air stream when using compressed air. The filter is capable offiltering to at least 5 microns. The filter assembly is pre-assembledat the factory and need only be installed on the power supply.

PLA

SM

A C

UTT

ING

EQ

UIP

MEN

T

48

ACCESSORIES

LEATHER LEADS COVER

4.6m (15 ft.) 9-1258 List Price - ¤89.716.1m (20 ft.) 9-1260 List Price - ¤104.017.6m (25 ft.) 9-1270 List Price - ¤130.0015.2m (50 ft.) 9-1280 List Price - ¤207.99

These leads covers are suitable for both 1TorchTM and SureLok®leads. Snaps make it easy to install. For wider torches, consider snapping two covers together width-ways.

TORCH COOLANT (For all Victor Technologies liquid-cooled systems)Extra Cool™ Coolant (Standard Coolant)Cat. No. 7-3580 List Price - ¤29.90Resists freezing down to +10oF (-12oC)

Ultra Cool™ CoolantCat. No. 7-3581 List Price - ¤38.37Resists freezing down to -27oF (-33oC)

Extreme Cool™ CoolantCat. No. 7-3582 List Price - ¤61.74Resists freezing down to -65oF (-51oC)

De-I Cool™ CoolantCat. No. 7-3583 List Price - ¤14.91De-ionised water mixture for use where freezing protection is not required.

PORTABLE GEARMulti-Purpose CartCat. No. 7-8888 List Price - ¤282.88Designed for most portable manual cutting systems such as the PakMaster or CUTMASTER, or any other similar sized systems.This rugged steel cart has easy rolling 203mm diameter wheels along with 76mm front mounted casters. This cart also serves as an excellent showroom display stand.

MISCELLANEOUS ACCESSORIES

Cutting GlovesCat. No. 9-1250 List Price - ¤14.11

Plasma Cutting Techniques - DVDPlease contact us for a free copy.

AR

C A

CC

ESS

OR

IES

49

AUTO-DARKENING WELDING HELMET

Part No. Description List Price ¤ WHF41001 Tweco WeldSkill Helmet 104.00

REPLACEMENT HELMET PARTS

WH41001FL Front Cover Lens 1.86WH41001IL Inside Cover Lens 1.35WH41001HB Front Headband 3.56WH41001HG Headgear Assembly 20.00

FeaturesAuto-Darkening Automatically adjusts

from light to dark and from dark to light

Variable Shade Welding shade levels from 9-13, adjustable based on the arc strength

Lightweight For improved operator comfort

4 Sensors To respond rapidly to the welding arc

Easy Process Changeover From welding to grinding

Delay Time Switch Long/Medium/Short delay

Solar-Powered No need to worry about changing batteries

Backed by Tweco Support Quality, reliability, and a 2-year warranty

Solar panels

Industrial grade filter with 4 sensors

Auto-darkening Variable shade selector on the outside left

Sensitivity selector on the outside right

Helmet pivot adjust

Chin spatter guard

NOW WITH

4 SENSORS

GEN

ERA

L IN

FOR

MA

TIO

N

50

Generator Information

All Victor TechnologiesTM inverters are generator-friendly

One of the main fears when selling any inverter is its reliability when used with a generator. Some inverters are very susceptible to input voltage fluctuations.

Thermal Arc and Victor® Thermal Dynamics® inverter-based systems have in built protection to guard against any such fluctuations and minimise damage due to under or over voltage conditions.

What Size of Generator do I Need?

The KVA rating of the machine is the main factor to consider. However, it is important to remember that the input voltage can be affected by load changes during arc striking particularly when using rods which require a high open circuit voltage in order to initiate the arc.

With the above in mind, listed on the next page are the input current ratings and equivalent KVA rating for Victor TechnologiesTM machines and the recommended generator size for running these systems up to their maximum duty cycle.

If you wish to run these machines on extension leads you must ensure that you use the correct rated cables and mains plugs. As a guiding principle the kVA rating of a generator should be 1/3 higher than the rated load it is to supply. Please see next page for more detailed information for specific machines.

GEN

ERA

L IN

FOR

MA

TIO

N

51

Part No. Power Source Input Voltage

Input Current( I efficiency )

Max rated kVA input

W1003605 161S 110V/230V 17.8/14.7A 4/5.5 kVA W1002903 175SE 230V 17A 10 kVAW1003003 175TE 230V 17.9A 10 kVAW1003803 201TS 110V/230V 20A / 16A 5kVA /8 kVA10-3091 400TS 400V 14A 21.5 kVA10-3099 200AC/DC 230V 22A 8.7 kVAW1006306 202AC/DC 230V 15.5A 8 kVA10-3098 300AC/DC 400V 12A 14.4 kVAFAB250C FAB250C 400V 10A 11.6 kVAFAB320C / FAB320S FAB320C / FAB320S 400V 10.8A 14.8 kVAFAB400S FAB400S 400V 13.7A 16.7 kVAFAB500S FAB500S 400V 22.5A 28.5 kVAW1003186 Fabricator 181i 230V 16.6A 5 kVAW1004207 Fabricator 211i 110V/230V 19.6A / 15A 4.5kVA / 8.5kVAW1004408 Fabricator 252i 230V* 16A / 23.4A 6.5kVA / 8.5kVA10-3089 400MST 400V 18A 21.5 kVAW1000103PP Powermaster 320SP 400V 14A 20 kVAW1000303PP / W1000203PP Powermaster 400SP 400V 20A 25 kVA

W1000503PP Powermaster 500SP 400V 29A 30 kVA1-3835-4 Drag-Gun Plus 230V 18A 8.3 kVA1-4200-4 Cutmaster 12+ 110V/230V 16.3A/13.5A 5.6/8.5 kVA1-5130-4 Cutmaster 12 400V 8A 5.3 kVA1-1130-4 Cutmaster 20 400V 11A 11 kVA1-1330-4 Cutmaster 25 400V 12A 11.8 kVA1-1730-4 Cutmaster 35 400V 24A 18.7 kVA1-1930-4 Cutmaster 40 400V 31A 23.6 kVA* The Fab 252i has a dual output which depends on mains / mains cable size

RECOMMENDED GENERATOR SIZES

Slow blow fuses or Motor rated circuit breakers are recommended for the above machines. Recommended Generators KVA ratings MUST be adhered to minimise the welding power source’s possible failure as a result of inadequate mains power at the equipments MAXIMUM input current draw at and MAXIMUM rated output at MAXIMUM duty cycle.

Warranty will be void if the welding power source fails as a result of being operated on inadequate mains power.

Calculating kVA (Kilovolt-Amperes) ratings.

1. Single Phase

2. Three Phase

Kilovolt-Amperes (kVA) = Volts x Amperes 1000

Kilovolt-Amperes (kVA) = Volts x Amperes X 1.73 1000

GEN

ERA

L IN

FOR

MA

TIO

N

52

Warranty

Victor TechnologiesTM guarantees the proposed product to be free from defects in material or workmanship when operated in accordance with the written instructions as defined in the owner’s manual supplied with the machine. Victor TechnologiesTM welding products are manufactured for use by commercial and industrial users and trained personnel with experience in the use and maintenance of electrical welding and cutting equipment.

Victor TechnologiesTM warranty will not apply to:

1. Equipment that has been modified by any other party other than Victor TechnologiesTM own service personnel or with prior written consent obtained from Victor TechnologiesTM Technical department (UK).

2. Equipment that has been used beyond the specifications established in the owners manual.

3. Installation not in accordance with the installation/service manual.4. Failure to clean and maintain the machine as set forth in the owner, installation or

service manual.

If warranty is being sought, please contact Victor TechnologiesTM Technical department for a warranty authorisation returns form.

WELDING EQUIPMENT - Limited Warranty Period

Product Period

400TS, 400 MST, 200AC/DC, 300AC/DC, PowerMaster Plus 320SP, 400SP, 500SP,

3 Years

202AC/DC, 350 AC/DC, Fabricator 181i, 211i, 252i, Fabricator 250C, 320C, 320S, 400S, 500S, 300GMS, 400GMS, 175SE, 175TE, 161S, 201TS

2 Years

Options and Accessories 6 Months

Repair and Replacement Parts 3 Months

Torch Consumables None

CUTTING EQUIPMENT - Limited Warranty Period

Product Period

Cutmaster Series 3 Years

Drag-Gun Plus, PAK-200 2 Years

1TorchTM, SureLokTM Torches and PCH-200 1 Year

Other Torches 6 Months

Repair Parts 3 Months

Torch Consumables None

GEN

ERA

L IN

FOR

MA

TIO

N

53

Terms and Conditions

Effective Date: These current list prices supersede all other price lists. All deliveries will be priced as this list.

Currencies: All prices are quoted in Euros.

Discounts: All prices quoted are list prices to which standard distributor discount will be applied.

Delivery Terms: UK Deliveries - Prices are Freight Paid to UK mainland destination. Export Deliveries - Prices are Ex Works, Chorley, UK.

Order Value: All orders are subject to our minimum order value of ¤200.

Product Details: We have a full range of technical literature available on request.

WELDING AND CUTTING EQUIPMENT TORCHES AND TORCH PARTSI1 Welding Equipment, Options and Accessories F1 Tweco MIG GunsI2 PowerMaster Range of Welding Equipment and Accessories F2 Tweco MIG Consumables and PartsI5 PowerMaster - Robotic Synergic MIG F4 Tweco MMA AccessoriesH1 TDC Manual Plasma Cutting Systems, Options and Accessories E1 “WS” WeldSkill Consumable PartsD1 CutSkill Plasma Cutting Systems G2 Arcair Systems, torches, Accessories and Parts

F6 Tweco Watercooler and Repair Parts G3 Arcair Slice and Underwater ElectrodesF7 GAR Cooler and Repair Parts G6 Arcair Gouging ElectrodesREPAIR PARTS G7 Arcair branded ChemicalsI4 Welding Repair Parts H2 Manual Plasma Torches, Parts and AccessoriesH4 Plasma Repair Parts R1 OCIM TIG TorchesSAFETY ACCESSORIES R2 OCIM TIG Consumables and Torch PartsF8 Helmets R3 Ocim MIG Digital Torches and ConsumablesGAS EQUIPMENT R4 Flex Neck Torches and Parts

A1 Victor Kits, Regulators, Torches, Repair Parts R5 Ocim MIG TWE TorchesA2 Victor branded Tips and Nozzles R6 Ocim MIG Torches, consumables and Torch PartsC1 CutSkill Gas Torches and RegulatorsC2 CutSkill Tips and NozzlesB1 TurboTorch branded products

PLASMA CUTTING PLASMA WELDINGJ1 Victor® Thermal Dynamics® Automation Systems and Components I6 Plasma Welding Systems + Accessories

J2 Victor® Thermal Dynamics® Automation Consumable Parts I7 Plasma Welding Torches, Leads andConsumables

J3 Automation Repair Parts MIG / TIG TORCHESJ4 ULTRACUT/AUTOCUT Systems and Components K1 Automation/Robotics MIG/TIG Torches, Parts,

AccessoriesJ5 XT-300/301 Torches Style 2 (22- & 36-)

J6 XT-300/301 Consumables Style 2 (22- & 36-)

J7 XT-300/301 Torches Style 1 (21- & 35-)

J8 XT-300/301 Consumables Style 1 (21- & 35-)

PRODUCT DISCOUNT CATEGORIES - INDUSTRIAL PRODUCTS

PRODUCT DISCOUNT CATEGORIES - AUTOMATION PRODUCTS

Prices are subject to change and amendment without notice

and to our normal terms and conditions of sale

GEN

ERA

L IN

FOR

MA

TIO

N

54

HOW TO CONTACT US

VICTOR TECHNOLOGIES LIMITEDChorley North Industrial ParkChorley, Lancashire PR6 7BXUnited KingdomContact NumbersTel: +44 1257 224824Fax: +44 1257 224800

VICTOR TECHNOLOGIES SRLVia Benaco 3,20098 San Giuliano Milanese (MI)ItalyContact NumbersTel: +39 02 36546801Fax: +39 02 36546840

Website: www.victortechnologies.euEmail: [email protected]

Senior VP Sales General Manager Europe/ROWFranco Monechi +39 348 4481304 [email protected]

Regional Sales ManagersSteve Waring UK/Eire/Sub-Saharan Africa +44 7774405075 [email protected] Arntz Director of Sales - Northern Europe +49 175 1777722 [email protected] Vanheeswyck Northern Europe +32 496634233 [email protected] Pachulski Central Eastern Europe +48 607 429 760 [email protected] Nurmivuori Nordic (Automation) +358 50 5965814 [email protected] Vischi Nordic / Middle East +39-342-0127246 [email protected] Demidov Russian Regions +7 8129862876 [email protected] Costamagna Southern Europe (Industrial) +39 0236546801 [email protected] Agazzi Southern Europe (Automation) +39 348 4481 302 [email protected] Dall’Oglio Western Europe/North Africa +34 608 121525 pdall’[email protected] Sales ManagersClive Simpson UK - South +44 7789685011 [email protected] Thackeray UK - North +44 7720350810 [email protected] & Marketing AdministrationDenise Archer Sales + Marketing Admin Manager +44 1257 224 811 [email protected] Mallion Senior Marketing Communications Specialist +44 1257 224 838 [email protected] SupportWhit Thomas Application Specialist (Cutting / Welding) +44 7860 256787 [email protected]

Erwin Zelis Automation Support Manager +31 615 838219 [email protected] Cadenabbio Automation Support Specialist (S Europe) +39 0236546801 [email protected] Zentjens Automation Support Specialist (N Europe) +31652062113 [email protected] Service - UKTeruka Attwood Team Leader +44 1257 224 819 [email protected] Service RepresentativesKerri Smith (Senior) +44 1257 224 840 [email protected] Caterall (Automation Specialist) +44 1257 224 808 [email protected] Graham +44 1257 224 834 [email protected] Hinawski +44 1257 224 820 [email protected] Service - ItalyRoberto Simonetti Team Leader +39 0236546801 [email protected] Service RepresentativesRamona Natale +39 0236546801 [email protected] Moreno +39 0236546801 [email protected] Marzola +39 0236546801 [email protected] ServiceAndy Warren European Service Manager +44 1257 224 852 [email protected] Roberts Repair Technician +44 1257 224 851 [email protected] Taylor Technical Administrator +44 1257 224 850 [email protected] Barizza Service Technician - Italy +39 0236546801 [email protected]

GEN

ERA

L IN

FOR

MA

TIO

N

55

VICTOR TECHNOLOGIES LIMITEDChorley North Industrial ParkChorley, Lancashire PR6 7BXUnited KingdomContact NumbersTel: +44 1257 224824Fax: +44 1257 224800

VICTOR TECHNOLOGIES SRLVia Benaco 3,20098 San Giuliano Milanese (MI)ItalyContact NumbersTel: +39 02 36546801Fax: +39 02 36546840

2013

Prod

uct G

uide

2013 product guide - kelski · 2013 product guide. contents thermal arc welding equipment part no...

Documents