ABOUT THE VEHICLE

APPLICATIONSSPEAKER NOTESDash Type:Aftermarket Type:Upper Door: N/A

Lower Door:Speaker Adapter:Speaker Harness:Speaker Assembly:

Upper Door:Lower Door:

Speaker Harness:Speaker Assembly:

Front Speakers:

Rear Speakers:FACTORY COLOR CODES

12v Battery (+):12v Accessory (+):12v Ground (-):12v Amp Turn On (+):Illumination:Left Front Speaker (+):Left Front Speaker (-):Right Front Speaker (+):Right Front Speaker (-):Left Rear Speaker (+):Left Rear Speaker (-):Right Rear Speaker (+):Right Rear Speaker (-):

Nissan Sentra 2013

Make:Model:Year:

STANDARD/OPTIONAL- AM/FM/CD/SAT/MP3/NAV RADIO- 6 Speaker System- 3.5mm AUX/USB iPod Input

L: 0.00”W: 0.00”D: 0.00”

Dimensions:

Tweeter

5 1/2”TBAN/A(0) Rivets Securing

Dimensions:UpperL: 0.00”

W: 0.00”D: 0.00”

N/A5 1/2”

N/A(0) Rivets Securing

New Custom Dash Single/Double Din

TBATBATBATBATBATBATBATBATBATBATBATBATBA

Radio Harness:Antenna Adapter:Blue Fusion/Bluetooth:AUX / iPod Interface:

Aftermaket Kits:

Harness/Interface/Adapters:

TBA

NN04B/NN04RBNAA2B/NAA2RBBT1000/BT1200AXIPTA

Other:Auxilary Input:USB Input:

Radio Panel Radio Panel

Scosche Pro App

Aftermarket Kit:

TBA

The Speaker

Decklid Subwoofer: TBASpeaker Adapter: TBA

Speaker Assembly: The SpeakerTBA

LowerL: 0.00”

W: 0.00”D: 0.00”

- Steering Wheel Controls- Bluetooth

L: 0.00”W: 0.00”D: 0.00”

Lower

Nissan Sentra 2013

Nissan Sentra 2013

+12 Volt Constant: Lt. Green/ Purple+12 Volt Acessory: Pink/ Black Ground: Black/ Lt. Green

R ight Positive: Orange/ Redh ative: Brown/ ink

VEHICLE DISASSEMBLY

REAR DECK SPEAKERS

RADIO REMOVAL

Make: Nissan Model: SentraYear: 2013

FRONT DOOR TWEETERS

PRELIMINARY:Disconnect the negative battery cable.

FRONT DOOR SPEAKERS

Scosche Pro App

1. With PRT unclip upper door molding, extract (2) T-25 Torx Screws.2. With PRT unclip and remove door handle panel, extract (2) T-25 Torx Screws.3. Extract (1) T-25 Torx Screw at bottom of door panel, unclip and remove side marker.4. Unclip door panel, unplug harness, release door lock cable and remove door panel.5. Extract (4) 8mm. Screws unplug and remove speaker.

1. With PRT unclip upper door molding, extract (2) T-25 Torx Screws.2. With PRT unclip and remove door handle panel, extract (2) T-25 Torx Screws.3. Extract (1) T-25 Torx Screw at bottom of door panel, unclip and remove side marker.4. Unclip door panel, unplug harness, release door lock cable and remove door panel.5. Extract (3) 8mm. Screws unplug and remove speaker.

1. With a PRT carefully remove the radio panel.2. Once radio panel is removed, extract (4) Phillips Head Screws securing radio.3. Unplug and remove radio.