2011 parts catalogue - bretts truck · 2016. 4. 12. · model: f10, f20, f50, f60 specific: f...

2011 PARTS

CATALOGUE

2

TWIN TUBE DESIGN

• 41mm bore size

• Nitrogen Gas Cell

• Viton Seal

MONOTUBE DESIGN

• 46mm bore

• HNBR Seal

• Nitrogen Gas

• 35mm bore size

• Gas pressurised

• Large oil capacity

• High temp seals

• Reinforced end mounts

• 35mm steer damper

• Chromed rod


• Reinforced end mounts

• One piece eyerings

• 41mm bore size

• 3 way adjustable


• 360 degree weld

• One piece eyerings

• Viton seal

3

Terms of Trade

Chevrolet

Daihatsu

Ford

Holden

Hyundai

Isuzu

Jeep

Landrover

Mazda

Mitsubishi

Nissan

Rangerover

Ssangyong

Suzuki

Toyota

Panhard Rods

Coil Spring Spacers

Castor Bushes

Long Travel Shocks

How to measure Shock Absorbers

Warranty Form

4-5

6

7-8

9-17

18-24

25

25-30

31-36

37-44

45-46

47-55

56-78

79-80

80

81

82-113

114

114

115

115

116

119

Con

ten

ts

IMPORTANT NOTES:g Identify the use of the vehicle e.g. recreational, constant load, work vehicle

etc.

g Are accessories fitted to the vehicle or will they be added in the future

(e.g. bull bar, winch, rear tyre carrier, long range fuel tank).

g Never assume the vehicle is at a standard ride height, a previous owner

may have modified the vehicle (check for different colour coil springs or

extra leaves in the leaf spring pack).

g Be aware if the vehicle has already been fitted with aftermarket or

modified springs the new springs may not give the height change

expected.

g Always measure the vehicles eye brow measurement before removing the

old springs and when the new springs have been fitted after a test drive.

4

SUPPLY

Goods will only be supplied to recognised POWERDOWN AUSTRALIA PTY LTD and RAW 4x4 (hereinafter known as “supplier”) distributors (hereinafter known as “customer”).

COMMERCIAL CREDIT

Commercial credit will be extended only to approved customers as per our Commercial Credit Application.

WARRANTY

No warranty claims will be considered if customer’s account is outside our trading terms.

SHOCK ABSORBERS

The supplier will warrant all shock absorbers against defects in materials or faulty workmanship provided the shock absorbers have been correctly installed as recommended by the supplier. The warranty period is 2 years from date of fitment.

COIL SPRINGS

All coil springs are warranted for a period of 2 years from faulty manufacture, breakage and sagging (being loss of unladen height of more than 10 mm).

LEAF SPRINGS

Leaf springs listed in this catalogue are warranted for a period of 12 months against faulty manufacture, breakage and sagging (being the loss of unladen camber by more than 12 mm).

SHACKLES AND PIN KITS

Spring shackles, pins and U-Bolts are covered by a 12 month warranty against defects in materials or faulty workmanship provided the products have been correctly installed. RAW 4x4 recommend that U-Bolts are retightened after initial 500 km’s and are then checked at regular intervals.

POLYURETHANE BUSHES

All polyurethane suspension bushes are warranted to the original purchaser for a period of 2 years from date of purchase against defects in materials or faulty workmanship provided the bushes have been correctly installed.

RAW 4x4 recommend shackles and pins should be replaced when there is any evidence of severe rust or wear to optimise the life expectancy of the bushes.

TORSION BARS

All torsion bars are warranted to the original purchaser for a period of 12 months.

GENERAL

The above-mentioned warranties do not cover defects due to accident, misuse, improper installation; this includes neglect and wear and tear. Consequential damage costs and injury, however caused, are not covered under warranty; (written or implied). RAW 4x4 suspension products are designed for “normal” use and are in no way, covered under warranty should the vehicle be used in any form of extreme sports or competition racing.

Warranty replacements will be despatched freight paid by the supplier or refunded at the original purchase price at the supplier’s sole discretion. The supplier’s responsibility does not exceed the original purchase price of the product claimed to be defective. The supplier is not responsible for special, incidental or consequential damages or charges.

TERMS OF TRADE

5

RETURN OF GOODS FOR CREDIT

Goods will be accepted for credit only under the following conditions:

All returned goods will be sent freight prepaid and are the customer’s responsibility.1.

Goods will not be accepted for credit without a Credit Ret2. urn Authorisation (CRA) number which must be obtained from the supplier by fax prior to return. Goods returned without a CRA will be returned to the customer at their expense.

Goods will not b3. e accepted for credit after 30 days from date of purchase. Goods outside this time frame will require prior written authorisation from the Regional Sales Manager and a CRA issued.

Goods are in a sale4. able condition, i.e. in original packaging, no external damage to goods, nor defective packaging or accessory packages missing. The supplier reserves the right to charge a minimum restocking fee of 10% plus repair/repainting costs (if needed) for goods that are not in a saleable condition.

Proof of purchas5. e must accompany goods, i.e. CRA and copy of invoice.

Goods supplie6. d on Special Order and/or were ordered for a special application and have been modified to suit that application will not be accepted for credit under any circumstances.

BACK ORDER

The customer will be advised if goods cannot be supplied ex stock at time of order and will be placed on back order and supplied as soon as goods are received by the supplier. Goods will remain on back order for a period of 60 days from placement of original order and will then be deemed to lapse, which may require re-ordering.

FREIGHT POLICY

Freight arrangements and payments are the customer’s responsibility. Full details 1. and instructions for the nominated carrier must be provided to the supplier in writing or by fax.

The supplier has arrangements with nominated freight carriers at cost effective rates. 2. The customer may select this facility and the freight cost will be added to the customer’s invoice.

Delivery by air freight is available at the customer’s expense. Details of the3. nominated air freight carrier, account number and full instructions must be given to the supplier in writing or by fax. Air freight will not be sent pre-paid.

COPYRIGHTAll rights reserved. The RAW4x4 logo(s) or any part or layout of the catalogue cannot be printed or reproduced without written authorisation from Powerdown Australia Pty Ltd.

Manufacturers names, part numbers, symbols or other references appearing in the RAW4x4 Parts Catalogue are used for reference for order of goods only. All information supplied was correct,

to the best of our knowledge, at the time of publication and is subject to change.

DISCLAIMER

For further information visit ... www.raw4x4.com.au 6

CH

EV

RO

LET

MODEL: K2500 SPECIFIC: Wagon

YEAR: 1992-1999

SUSPENSION: IFS Front/Leaf Spring Rear

FRONT PART NO. HEIGHT SPECIFICATION/RATING QTY

SHOCK ABSORBERS

G6025M1Y STD 35mm Bore Nitrogen Gas Charged 2

REAR SHOCK ABSORBERS


MODEL: K2500 SPECIFIC: Wagon

YEAR: 2000-2005



SHOCK ABSORBERS

G6031M2BY STD 35mm Bore Nitrogen Gas Charged 2

NM608M2 0-50mm 41mm Bore Nitrogen Gas Cell Technology 2

REARSHOCK ABSORBERS



SUBURBAN

IN DEVELOPMENT STD STANDARD B FITTED WITH PROTECTION DUST BOOT QTY (RPV) REQUIRED PER VEHICLE

GENERIC PRODUCT (HD) HEAVY DUTY OPTION Y FITTED WITH TUFF-YELLO BUSHES*

** 7

DA

IHA

TS

UMODEL: F10, F20, F50, F60 SPECIFIC: F Series

YEAR: 3/88-1989

SUSPENSION: Leaf Spring Front/Leaf Spring Rear


SHOCK ABSORBER

G6025Y STD 35mm Bore Nitrogen Gas Charged 2

REAR SHOCK ABSORBER


FEROZA/SPORTRAKMODEL: F300 SPECIFIC: Hard Top

YEAR: 10/88-9/92

SUSPENSION: Torsion Bar Front/Leaf Spring Rear


SHOCK ABSORBER

G6017BY STD 35mm Bore RAW Nitro Gas Charged 2

REARSHOCK ABSORBER

N/A

MODEL: F310 SPECIFIC: Hard Top

YEAR: 10/92-9/97

SUSPENSION: Torsion Bar Front/Coil Spring Rear


SHOCK ABSORBER

G6017BY STD 35mm Bore RAW Nitro Gas Charged 2

REARSHOCK ABSORBER

G6028Y STD 35mm Bore RAW Nitro Gas Charged 2

F SERIES


DA

IHA

TS

U

MODEL: F77, F78, F98 SPECIFIC: Hard Top

YEAR: 1993-1998



SHOCK ABSORBER

G6031M1BY STD 35mm Bore Nitrogen Gas Charged 2

REARSHOCK ABSORBER

N/A

MODEL: F77, F87 SPECIFIC: Ute/Trayback

YEAR: 11/86-1993 NOTE: Trayback Only



SHOCK ABSORBER


REARSHOCK ABSORBER


MODEL: F70, F75, F80, F85 SPECIFIC: Hard Top

YEAR: 6/84-7/93 NOTE: Excluding Trayback



SHOCK ABSORBER


REARSHOCK ABSORBER


ROCKY/FOURTRACK/TAFT



** 9

MODEL: BRONCO SPECIFIC: Wagon

YEAR: 1980-1991 NOTE: 2 Shocks per Front Axle

SUSPENSION: Coil Spring Front/Leaf Spring Rear


SHOCK ABSORBER

T63414Y STD 41mm Bore RFX 3 way Adjustable 2

REAR SHOCK ABSORBER

T233M1Y STD 41mm Bore RFX 3 way Adjustable 2

MODEL: BRONCO SPECIFIC: Wagon




SHOCK ABSORBER

T110M3Y(See Note) STD 41mm Bore RFX 3 way Adjustable

Note: Forward of Front Axle 2

T63414Y(See Note) STD 41mm Bore RFX 3 way Adjustable

Note: Rear of Front Axle 2

REARSHOCK ABSORBER


FO

RD

BRONCO


MODEL: PC, PD, PE 4WD UTE SPECIFIC: Ute/Dual Cab

YEAR: 87-11/2006



SHOCK ABSORBERS

G6017M2BY 0-50mm 35mm Bore Nitrogen Gas Charged 2

TORSION BARS

TB39-1546 Heavy Duty - Rate Increased

(Length - 926mm) 1

PAIR

REAR PART NO. HEIGHT SPECIFICATION/RATING QTY

SHOCK ABSORBERS

G6014M4Y 0-50mm 35mm Bore Nitrogen Gas Charged 2

LEAF SPRINGS

MAZ-003-R 35mm Heavy Duty 5 + 2 LeavesRecreational / Medium Load-GVM

2

B2600-4X4-R 35mm Heavy Duty 6 + 2 LeavesConstant Load / 200Kg - GVM 2

U-BOLTS

UB59-453-3 Heavy Duty 4

SPRING SHACKLE HANGERS

SK59-010 Heavy Duty - Greaseable 2

SHACKLE BUSH KITS

SPF0311C2K Rear Spring Front Eye 1

SPF0502C2K Rear Spring Lower Rear Eye 1

SPF0753C2K Rear Spring Upper Shackle 1

FO

RD

COURIER



** 11

MODEL: UN, UP, UQ SPECIFIC: Wagon

YEAR: 10/96-4/99 NOTE: Excluding Adjustable Suspension

SUSPENSION: Coil Spring Front/Coil Spring Rear


SHOCK ABSORBERS

84030** STD Gas Charged Monotube 2


84031** STD Gas Charged Monotube 2

F SERIESMODEL: F100, F150 SPECIFIC: Ute/Trayback




SHOCK ABSORBERS








SHOCK ABSORBERS




FO

RD

EXPLORER






T110M3Y(See Note)

STD 41mm Bore RFX 3 way AdjustableNote: Forward of Front Axle 2

T63414Y(See Note)

STD 41mm Bore RFX 3 way AdjustableNote: Rear of Front Axle 2

REAR


MODEL: F250 SPECIFIC: Ute/Trayback

YEAR: 1987-1996




REAR



YEAR: 2000-2003 NOTE: 2 Shocks per Rear Axle



RT101M2Y 0-50mm Big Bore Hydraulic Truck Shock Absorber 2

REAR



YEAR: 2003- NOTE: 4 Shocks per Rear Axle





REAR



FO

RD

F SERIES



** 13

MODEL: Y60 SPECIFIC: SWB Wagon

YEAR: 3/88-



SHOCK ABSORBERS


G6003Y 50mm 35mm Bore Nitrogen Gas Charged 2

NM294 0-50mm 41mm Bore Nitrogen Gas Cell Technology 2

COIL SPRINGS Note: Coil Spring Spacers refer to rear section of Catalogue

C45-094 50mm Linear Rate - Heavy Duty 1PAIR

ADJUSTABLE PANHARD ROD

KPR004

Recommended fitment for vehicles with raised suspensions to prevent axle shift and increase stability

1

CASTOR BUSH KITS Note: It is recommended that the following Castor Bush Kits be fitted to raised Suspensions

SPF1721KC2 50mm Offset centre hole to increase Castor Setting 1

SPF1721XKC2 70-100mm Extra Offset centre hole to increase Castor Setting 1

STEERING DAMPER

SS232 3/88-8/89 35mm Big Bore Gas Cell Technology 1

SS177 9/1989 on 35mm Big Bore Gas Cell Technology 1


SHOCK ABSORBERS

G6006Y 0-50mm 35mm Bore Nitrogen Gas Charged 2





KPR005Recommended fitment for vehicles with raised suspensions to prevent axle shift and increase stability

1

FO

RD

MAVERICK


MODEL: Y60 SPECIFIC: LWB Wagon

YEAR: 3/88-



SHOCK ABSORBERS





C45-102 50mm Linear Rate - Heavy Duty 50-80kg Accessories

1PAIR


KPR004


1




STEERING DAMPER




SHOCK ABSORBERS







1

FO

RD

MAVERICK



** 15

MODEL: Y60 SPECIFIC: Ute & Cab Chassis

YEAR: 1988-



SHOCK ABSORBERS


T106Y 0-50mm 41mm Bore RFX 3 way Adjustable 2

LEAF SPRINGS

Y60-8L-F 45mm Heavy Duty - 8 Leaves

With 50-100kg Accessories 2

U BOLTS

UB45-669 Heavy Duty 4



SHACKLE PINS

SP45-026 Heavy Duty - Greaseable 2

SHACKLE BUSH KITS

SPF0978C2K Heavy Duty - Polyurethane 1

STEERING DAMPER




SHOCK ABSORBERS



LEAF SPRINGS

Y60-6+2-R RH 50mm Rear RH Side / Constant Load 300kg - GVM 1

Y60-6+2-R LH 50mm Rear LH Side / Constant Load 300kg - GVM 1

U BOLTS




SHACKLE PINS


SHACKLE BUSH KITS


FO

RD

MAVERICK


MODEL: RANGER UTE/RAIDER WAGON YEAR: 1987-11/06



SHOCK ABSORBERS



TORSION BARS


(Length - 926mm)1

PAIR


SHOCK ABSORBERS


NM326M4 50mm 41mm Bore Nitrogen Gas Cell Technology 2

LEAF SPRINGS

MAZ-003-R 35mm Heavy Duty - 5 + 2 LeavesRecreational / Meduim Load - GVM 2

B2600-4X4-R 35mm Heavy Duty - 6 + 2 LeavesConstant Load / 200Kg - GVM 2

U-BOLTS




SHACKLE BUSH KITS




FO

RD

RANGER/RAIDERSPECIFIC: Ute/Dual Cab/Wagon



** 17

MODEL: PJ SPECIFIC: Ute/Dual Cab

YEAR: 2007 on



SHOCK ABSORBERS



TORSION BARS


(Length - 1024mm x 27mm)1

PAIR


SHOCK ABSORBERS



LEAF SPRINGS

L39-030-R 40mm Standard Duty - 3 + 2 LeavesRecreational / Light Load - GVM 2

L39-031-R 40mm Heavy Duty - 4 + 2 LeavesTrademan / 280kg - GVM 2

L39-032-R 40mm Heavy Duty - 5 + 2 LeavesConstant Load / 420kg - GVM

2

U-BOLTS




SHACKLE BUSH KITS




FO

RD

RANGER


MODEL: RC SPECIFIC: Ute/Dual Cab

YEAR: 7/2008 on



SHOCK ABSORBERS

G6031BY 0-50mm 35mm Bore Nitrogen Gas Charged 2


TORSION BARS


(Length - 1145mm)1

PAIR


SHOCK ABSORBERS


NM626 50mm 41mm Bore Nitrogen Gas Cell Technology 2

LEAF SPRINGS

RODE-013-R 45mm 5 + 3 LeavesRecreational / Light Load

2

RODE-014-R 45mm 6 + 3 LeavesTradesman / 250kg-GVM 2

U-BOLTS




SHACKLE BUSH KITS


SPF2231-8C2KRear Spring Lower Rear Eye & Upper Rear Shackle 1

HO

LD

EN

COLORADO



** 19

MODEL: MB SPECIFIC: Wagon

YEAR: 1995-2/99



SHOCK ABSORBERS

G6031BY STD 35mm Bore Nitrogen Gas Charged 2

REARSHOCK ABSORBERS


MODEL: MX SPECIFIC: Wagon YEAR: 2/99-



SHOCK ABSORBERS


REARSHOCK ABSORBERS

G6019M4Y STD 35mm Bore Nitrogen Gas Charged 2H

OLD

EN

FRONTERA

Notes


MODEL: UBS13, 16, 52 SPECIFIC: LWB Wagon

YEAR: 11/81-10/86



SHOCK ABSORBERS


TORSION BARS


(Length - 927mm)1

PAIR


SHOCK ABSORBERS


LEAF SPRINGS

RODE-008-R 30mm Heavy Duty - 4 + 2 LeavesRecreational / Medium Load - GVM 2

U-BOLTS




SHACKLE BUSH KITS



HO

LD

EN

JACKAROO



** 21

MODEL: UBS16, 17, 52, 55 SPECIFIC: LWB Wagon

YEAR: 11/86-3/92



SHOCK ABSORBERS


TORSION BARS


(Length - 1000mm)1

PAIR


SHOCK ABSORBERS


LEAF SPRINGS

RODE-008-R 30mm Heavy Duty - 4+2 LeavesRecreational / Medium Load - GVM 2

U-BOLTS




SHACKLE BUSH KITS



HO

LD

EN

JACKAROO


HO

LD

EN

JACKAROOMODEL: UBS25, 26, 69, 73 SPECIFIC: SWB & LWB Wagon

YEAR: 5/92-



SHOCK ABSORBERS


TORSION BARS


(Length - 1220mm)1

PAIR


SHOCK ABSORBERS


COIL SPRINGS

C21-165V1992-2000

40mm Variable Rate - Heavy DutyRecreational / Medium Load - GVM

1PAIR

C21-215V2001 on

40mm Variable Rate - Heavy DutyRecreational / Light Load - GVM

1PAIR

RODEOMODEL: KB4, KBD4, TF SPECIFIC: Ute

YEAR: 1/81-7/88



SHOCK ABSORBERS


REARSHOCK ABSORBERS




** 23

HO

LD

EN

RODEOMODEL:TFS, R7, R9 SPECIFIC: Ute/Dual Cab

YEAR: 8/88-3/03



SHOCK ABSORBERS


TORSION BARS


(Length - 1000mm)1

PAIR


SHOCK ABSORBERS


LEAF SPRINGS

RODE-008-R 35mm Heavy Duty - 4+2 LeavesTradesman / 200kg - GVM 2

U-BOLTS




SHACKLE BUSH KITS




HO

LD

EN

RODEOMODEL: RA SPECIFIC: Ute/Dual Cab

YEAR: 3/03-6/08



SHOCK ABSORBERS



TORSION BARS


(Length - 1145mm)1

PAIR


SHOCK ABSORBERS



LEAF SPRINGS

HOL-01DF 35mm Medium Duty - 4 + 1 LeavesRecreational / Light Load - GVM 2

RODE-013-R 45mm Heavy Duty - 5 + 3 LeavesTradesman / 150kg - GVM 2

U-BOLTS




SHACKLE BUSH KITS





** 25

MODEL: UBS13, 16, 52 SPECIFIC: LWB Wagon

YEAR: 11/81-10/86 NOTE: Up to Chassis No. 4524288


MODEL: TERRACAN SPECIFIC: Wagon

YEAR: 2001



SHOCK ABSORBERS


TORSION BARS


(Length - 927mm)1

PAIR


SHOCK ABSORBERS


LEAF SPRINGS


U-BOLTS




SHACKLE BUSH KITS




SHOCK ABSORBERS



SHOCK ABSORBERS


BIG HORN / TROOPER

TERRACAN

HY

UN

DA

IIS

UZ

U


MODEL: UBS16, 17, 52, 55 SPECIFIC: LWB Wagon

YEAR: 11/86-3/92 NOTE: From Chassis No. 4524289



SHOCK ABSORBERS


TORSION BARS


(Length - 1000mm)1

PAIR


SHOCK ABSORBERS


LEAF SPRINGS


U-BOLTS




SHACKLE BUSH KITS



ISU

ZU

BIG HORN / TROOPER



** 27

MODEL: UBS25, 26, 69, 73 SPECIFIC: SWB & LWB Wagon

YEAR: 5/92-



SHOCK ABSORBERS


TORSION BARS


(Length - 1220mm)1

PAIR


SHOCK ABSORBERS


COIL SPRINGS

C21-165V1992-2000

40mm Variable Rate - Heavy Duty Recreational / Medium Load - GVM

1PAIR

C21-215V2001 on

40mm Variable Rate - Heavy DutyRecreational / Light Load - GVM

1PAIR

D-MAX / INVADER MODEL: KB4, KBD4, TF SPECIFIC: Ute

YEAR: 1/81-7/88



SHOCK ABSORBERS


REARSHOCK ABSORBERS


ISU

ZU

BIG HORN / TROOPER


MODEL: TFS, R7, R9 SPECIFIC: Ute/Dual Cab

YEAR: 8/88-3/03



SHOCK ABSORBERS


TORSION BARS


(Length - 1000mm)1

PAIR


SHOCK ABSORBERS


LEAF SPRINGS


U-BOLTS




SHACKLE BUSH KITS



ISU

ZU

D-MAX / INVADER



** 29

MODEL: RA SPECIFIC: Ute/Dual Cab

YEAR: 3/03-6/08



SHOCK ABSORBERS



TORSION BARS


(Length - 1145mm)1

PAIR


SHOCK ABSORBERS



LEAF SPRINGS

HOL-01DF 35mm Medium Duty - 4 + 1 LeavesRecreational / Light Load - GVM 2


U-BOLTS




SHACKLE BUSH KITS



ISU

ZU

D-MAX / INVADER


ISU

ZU

MU UTE / WIZARDMODEL: USC SPECIFIC: Ute

YEAR: 89-4/95 NOTE: Fitted with Rear Leaf Springs



SHOCK ABSORBER


REAR SHOCK ABSORBER


MODEL: USC SPECIFIC: Ute

YEAR: 1992 on NOTE: Fitted with Rear Coil Springs



SHOCK ABSORBER


REAR SHOCK ABSORBER


Notes



** 31

MODEL: CJ5 SPECIFIC: Soft Top/Hard Top

YEAR: 1972-1983



G6025Y1972-81

STD 35mm Bore Nitrogen Gas Charged 2

G6026M1Y1982-83


REAR



YEAR: 1972-1975




REAR



YEAR: 76-86



G6025Y1976-81


G6026M1Y1982-86


REAR


JEEP

CJ SERIES



YEAR: 1982-1986




REAR


DJ SERIESMODEL: DJ5, DJ6 SPECIFIC: Soft Top/Hard Top

YEAR: 1972-1975




REAR


CHEROKEEMODEL: WAGONEER / GRAND WAGONEER SPECIFIC: Wagon

YEAR: 1976-1991




REAR


JEEP

CJ SERIES



** 33

MODEL: XJ (FJB, FJC) SPECIFIC: Wagon

YEAR: 1994-2001 NOTE: Limited & Classic Only



SHOCK ABSORBERS


COIL SPRINGS

C29-002

45mm Linear Rate - Heavy DutyWithout Accessories

1PAIR

35mm Linear Rate - Heavy DutyWith 50-100kg Accessories


SHOCK ABSORBERS


LEAF SPRINGS

JEEP-006-R RH 45mm Rear RH Side / Heavy Duty - 5 Leaves 1

JEEP-006-R LH 45mm Rear LH Side / Heavy Duty - 5 Leaves 1

U-BOLTS


SHACKLE BUSH KITS




JEEP

CHEROKEE


MODEL: XJ (FJB, FJC) SPECIFIC: Wagon

YEAR: 1994-2001 NOTE: Sport Model Only



SHOCK ABSORBERS


COIL SPRINGS

C29-016

45mm Linear Rate - Heavy DutyWithout Accessories

1PAIR

35mm Linear Rate - Heavy DutyWith 50-100kg Accessories


SHOCK ABSORBERS


LEAF SPRINGS

JEEP-005-R RH 45mm Rear RH Side / Heavy Duty - 5 Leaves 1

JEEP-005-R LH 45mm Rear LH Side / Heavy Duty - 5 Leaves 1

U-BOLTS


SHACKLE BUSH KITS




JEEP

CHEROKEE



** 35

MODEL: ZG, ZJ SPECIFIC: Wagon

YEAR: 3/96-5/99



SHOCK ABSORBERS


COIL SPRINGS

C29-002 35mm Linear Rate - Heavy Duty Without Accessories

1PAIR


1PAIR


SHOCK ABSORBERS


COIL SPRINGS

C29-00335mm Linear Rate - Heavy Duty 1

PAIR

MODEL: WG, WJ SPECIFIC: Wagon

YEAR: 1999-2004



SHOCK ABSORBERS




JEEP

GRAND CHEROKEE


MODEL: TJ SPECIFIC: Soft Top/Hard Top

YEAR: 10/1996 on



SHOCK ABSORBERS


COIL SPRINGS


1PAIR


1PAIR


SHOCK ABSORBERS


COIL SPRINGS


JEEP


SHOCK ABSORBERS


COIL SPRINGS

C29-074 60mm Linear Rate / Heavy DutyV6 Petrol

1PAIR

C29-078 55mm Linear Rate / Heavy Duty2.8 Ltr Diesel

1PAIR


SHOCK ABSORBERS


COIL SPRINGS

C29-073 60mm Linear Rate / Heavy Duty2 Door SWB

1PAIR

C29-075 60mm Linear Rate / Heavy Duty4 Door LWB

1PAIR

MODEL: JK SPECIFIC: SWB 2 DOOR LWB 4 DOOR

YEAR: 2007 ON


WRANGLER



** 37

MODEL: 80”, 88” & 109” WB SPECIFIC: All Models

YEAR: 1953-1983



G56112** STD 35mm Bore Nitrogen Gas Charged 2

REAR


STEERING DAMPER

SS522 35mm Big Bore Gas Cell Technology 1

SERIES ll, llA & lllMODEL: 80” & 88” WB SPECIFIC: All Models

YEAR: 1953-1983




REAR


STEERING DAMPER


MODEL: 109” LWB SPECIFIC: All Models

YEAR: 1958-1984




REAR


STEERING DAMPER


SERIES l

LA

ND

RO

VER


MODEL: 110 Series SPECIFIC: Wagon

YEAR: 1984 on NOTE: Models without Self Levelling Valve Only

SUSPENSION: Coil Spring Front/Coil Spring Rear ENGINE: V8 Petrol & 2.5L Diesel


SHOCK ABSORBERS



COIL SPRINGS


1PAIR

STEERING DAMPER



SHOCK ABSORBERS



COIL SPRINGS

C51-019 45mm Linear Rate - Heavy Duty250kg - GVM

1PAIR


1PAIR

COUNTY

LA

ND

RO

VER



** 39

MODEL: 90 Series SPECIFIC: Wagon

YEAR: 1984 on NOTE: Models without Self Levelling Valve Only



SHOCK ABSORBERS



COIL SPRINGS

C51-014 40mm Linear Rate - Heavy Duty V8 Petrol without Accessories

1PAIR

C51-018 45mmLinear Rate - Heavy Duty V8 Petrol with 50-80kg Accessories2.5Lt Diesel with 80kg Accessories

1PAIR

STEERING DAMPER



SHOCK ABSORBERS



COIL SPRINGS


C51-027V 50mm Variable Rate - Heavy Duty220kg - GVM

1PAIR

DEFENDER

LA

ND

RO

VER


DEFENDER

LA

ND

RO

VER

MODEL: 110 Series SPECIFIC: Wagon & Cab Chassis

YEAR: 1984-3/92 NOTE: Models without Self Levelling Valve Only



SHOCK ABSORBERS



COIL SPRINGS

C51-017 40mm Linear Rate - Heavy Duty Without Accessories

1PAIR


1PAIR

STEERING DAMPER



SHOCK ABSORBERS



COIL SPRINGS


1PAIR


1 PAIR



** 41

DEFENDER

LA

ND

RO

VERMODEL: 110 Series SPECIFIC: Wagon & Cab Chassis

YEAR: 4/92-2001 NOTE: Models without Self Levelling Valve Only



SHOCK ABSORBERS



COIL SPRINGS

C51-018 30mm Linear Rate - Heavy Duty Up to 50kg of Accessories

1PAIR


1PAIR

STEERING DAMPER



SHOCK ABSORBERS



COIL SPRINGS


1PAIR


1 PAIR


DEFENDER

LA

ND

RO

VER

MODEL: 130 Series SPECIFIC: Wagon & Cab Chassis

YEAR: 1992-2001

SUSPENSION: Coil Spring Front/Coil Spring Rear ENGINE: All Variants


SHOCK ABSORBERS



COIL SPRINGS


1PAIR


1PAIR

STEERING DAMPER



SHOCK ABSORBERS



COIL SPRINGS

C51-009 45mmLinear Rate - Heavy DutyNote: Replace inner coil helper for maximum load carrying capacity

1PAIR



** 43

DISCOVERY

LA

ND

RO

VERMODEL: Series l SPECIFIC: Wagon

YEAR: 1991-2/99



SHOCK ABSORBERS



COIL SPRINGS

C51-014 45mm Linear Rate - Heavy Duty With NO Accessories

C51-018

45mm Linear Rate - Heavy Duty Petrol with 80kg Accessories

1PAIR

40mm Linear Rate - Heavy Duty Diesel with 50kg Accessories

1PAIR

STEERING DAMPER



SHOCK ABSORBERS



COIL SPRINGS


C51-022 50mm Linear Rate - 150kg to GVM 1PAIR

C51-027V 50mm Variable Rate - Extra Heavy Duty200kg - GVM

1PAIR


DISCOVERY

LA

ND

RO

VER

MODEL: Series ll including TD5 SPECIFIC: Wagon

YEAR: 3/99-2005 NOTE: Excluding Air Suspension (See Below)



SHOCK ABSORBERS


COIL SPRINGS


1PAIR


1PAIR

STEERING DAMPER



SHOCK ABSORBERS


COIL SPRINGS


C51-022 50mm Linear Rate - 150kg to GVM 1PAIR

C51-027V 50mm Variable Rate - Extra Heavy Duty200kg - GVM

1PAIR

MODEL: Series ll including TD5 SPECIFIC: Wagon YEAR: 3/99-2005

SUSPENSION: Air Suspension Front/Air Suspension Rear



REAR




** 45

MODEL: B2600 SPECIFIC: Ute/Dual Cab

YEAR: 1987 on



SHOCK ABSORBERS



TORSION BARS


(Length - 926mm)1

PAIR


SHOCK ABSORBERS



LEAF SPRINGS

MAZ-003-R 35mm Heavy Duty - 5 + 2 LeavesRecreational / Medium Load - GVM 2

B2600-4X4-R 35mm Heavy Duty - 6 + 2 LeavesConstant Load / 200kg - GVM 2

U-BOLTS




SHACKLE BUSH KITS




MA

ZD

A

B2600 / BRAVO 4X4 / PROCEED


MODEL: BT50 SPECIFIC: Ute/Dual Cab

YEAR: 2007 on



SHOCK ABSORBERS



TORSION BARS


(Length - 1024mm x 27mm)1

PAIR


SHOCK ABSORBERS



LEAF SPRINGS

L39-030-R 40mm Standard Duty - 3 + 2 LeavesRecreational / Light Load - GVM 2

L39-031-R 40mm Heavy Duty - 4 + 2 LeavesTrademan / 280kg - GVM 2

L39-032-R 40mm Heavy Duty - 5 + 2 LeavesConstant Load / 420kg - GVM 2

U-BOLTS




SHACKLE BUSH KITS




MA

ZD

A

BT50



** 47

MODEL: PA SPECIFIC: 4 Door Wagon

YEAR: 3/99-7/00



SHOCK ABSORBERS


REARSHOCK ABSORBERS


MODEL: PA ll SPECIFIC: Wagon

YEAR: 8/00-2002

SUSPENSION: Torsion Bar Front/Coil Spring Rear ENGINE: V6 Petrol & 2.5L Diesel


SHOCK ABSORBERS


TORSION BARS


(Length - 1307mm)1

PAIR


SHOCK ABSORBERS


COIL SPRINGS

C43-043V 30mm Variable Rate - Heavy DutyMedium Load - GVM

1PAIR

MIT

SU

BIS

HI

CHALLENGER / G WAGON


MIT

SU

BIS

HI

CHALLENGER/PAJERO SPORT

MODEL: MA, MB, MC, MD SPECIFIC: Ute

YEAR: 1981-1987





STEERING DAMPER


REAR



L200

MODEL: CHALLENGER / PAJERO SPORT SPECIFIC: Wagon

YEAR: 2009 on



SHOCK ABSORBERS

CS346Y 0-50mm 46mm Bore Monotube

Nitrogen Gas Charged 2

COIL SPRINGS

C43-188 45mm Linear Rate / Heavy Duty 1PAIR


SHOCK ABSORBERS


COIL SPRINGS


C43-101 40mm Linear Rate / Heavy Duty250kg to GVM

1PAIR



** 49

MIT

SU

BIS

HI

L300MODEL: SA, SB, SC, SD, SE, SF, SG, SH SPECIFIC: Van

YEAR: 1981-1987




REAR


G56157** 0-35mm 35mm Bore Nitrogen Gas Charged

MODEL: SF, SG, SH YEAR: 1983-10/86 2

MODEL: NA, NB, NC, ND, NE, NF, NG SPECIFIC: Wagon

YEAR: 1983-6/91 NOTE: Models with Rear Leaf Springs Only



SHOCK ABSORBERS



REARSHOCK ABSORBERS



MODEL: NA, NB, NC, ND, NE, NF, NG SPECIFIC: Wagon

YEAR: 1983-6/91 NOTE: Models with Rear Coil Springs Only



SHOCK ABSORBERS


REARSHOCK ABSORBERS


PAJERO / SHOGUN / MONTERO


MIT

SU

BIS

HI

PAJERO / SHOGUN / MONTEROMODEL: NH, NJ SPECIFIC: LWB Wagon

YEAR: 7/1991 on

SUSPENSION: Torsion Bar Front/Leaf Spring Rear ENGINE: 4 Cylinder


SHOCK ABSORBERS



TORSION BARS


(Length - 1282mm)1

PAIR


SHOCK ABSORBERS



LEAF SPRINGS

PAJ-4+1-R 40mm Heavy Duty 4 + 1 Leaves Medium Load - GVM 2

U-BOLTS




SHACKLE PINS


SHACKLE BUSH KITS






** 51

MIT

SU

BIS

HI

PAJERO / SHOGUN / MONTEROMODEL: NF, NH, NJ, NK, NL SPECIFIC: SWB 2 Door Wagon

YEAR: 5/91-1996

SUSPENSION: Torsion Bar Front/Coil Spring Rear ENGINE: V6 Petrol

MODEL: NF, NH, NJ, NK, NL SPECIFIC: LWB 4 Door Wagon

YEAR: 5/91-1996

SUSPENSION: Torsion Bar Front/Coil Spring Rear ENGINE: V6 Petrol


SHOCK ABSORBERS


TORSION BARS


(Length - 1282mm)1

PAIR


SHOCK ABSORBERS


G6669Y 0-50mm 35mm Bore Nitrogen Gas ChargedHeavy Duty Options

2

COIL SPRINGS

C43-101 35mm Linear Rate / Heavy DutyMedium Load - GVM

1PAIR


SHOCK ABSORBERS


TORSION BARS


(Length - 1282mm)1

PAIR


SHOCK ABSORBERS



2

COIL SPRINGS



MIT

SU

BIS

HI

PAJERO / SHOGUN / MONTEROMODEL: NF, NH, NJ, NK, NL SPECIFIC: LWB 4 Door Wagon

YEAR: 1995-5/2000

SUSPENSION: Torsion Bar Front/Coil Spring Rear ENGINE: V6 Petrol & Turbo Diesel

MODEL: NM, NP SPECIFIC: SWB & LWB Wagon

YEAR: 2000 on

SUSPENSION: Coil Spring Front/Coil Spring Rear ENGINE: V6 Petrol & Turbo Diesel


SHOCK ABSORBERS



COIL SPRINGS

C43-124 45mm Linear Rate / Heavy DutyV6 Petol without Accessories

1PAIR

C43-126 45mmLinear Rate / Heavy DutyV6 Petol with 100kg AccessoriesTurbo Diesel with 50kg Accessories

1PAIR

C43-144 45mm Linear Rate / Heavy DutyTurbo Diesel with 50-110kg Accessories

1PAIR


SHOCK ABSORBERS


COIL SPRINGS

C43-191 45mm Suits SWB: Linear Rate / Heavy DutyMedium Load - GVM

1PAIR


1PAIR

C43-193 45mm Linear Rate / Extra Heavy Duty180kg to GVM

1PAIR

C43-195 45mm Linear Rate / Extra Heavy Duty250kg to GVM

1PAIR


SHOCK ABSORBERS


TORSION BARS


(Length - 1307mm)1

PAIR


SHOCK ABSORBERS



2

COIL SPRINGS

C43-101 35mm Linear Rate / Heavy Duty

Medium Load - GVM1

PAIR



** 53

MIT

SU

BIS

HI

TRITON / L200


SHOCK ABSORBERS

G6017M1BY 0-50mm 35mm Bore Nitrogen Gas Charged

Note: With Bar Pin Lower Fitting 2

NM607M1 0-50mm 41mm Bore Nitrogen Gas Cell Technology

Note: With Bar Pin Lower Fitting2

TORSION BARS

TB43-2004 Cyl Petrol & Diesel up to 1992Heavy Duty - Rate Increased(Length - 1370mm)

1PAIR

TB43-202V6 Petrol 6/1991 on Heavy Duty - Rate Increased(Length - 1370mm)

1PAIR

TB43-204Turbo Diesel 1992 onHeavy Duty - Rate Increased(Length - 1370mm)

1PAIR


SHOCK ABSORBERS


G6014M1Y 50mm 35mm Bore Nitrogen Gas Charged 2



LEAF SPRINGS

TRIT-3+2-R 35mm Heavy Duty - 4 + 1 Leaves Recreational / Medium Load - GVM 2

TRIT-003-R 40mm Extra Heavy Duty - 4 + 2 Leaves Constant Load / 300kg - GVM 2

U-BOLTS




SHACKLE BUSH KITS




MODEL: ME, MF, MG, MH, MJ SPECIFIC: Ute/Dual Cab

YEAR: 1987-11/96

SUSPENSION: Torsion Bar Front/Leaf Spring Rear ENGINE: Petrol & Diesel


MIT

SU

BIS

HI

TRITONMODEL: MK SPECIFIC: Ute/Dual Cab

YEAR: 11/1996 on

SUSPENSION: Torsion Bar Front/Leaf Spring Rear ENGINE: V6 Petrol & Turbo Diesel


SHOCK ABSORBERS



TORSION BARS

TB43-202V6 Petrol with No AccessoriesHeavy Duty - Rate Increased(Length - 1370mm)

1PAIR

TB43-204Petrol with Accessories & Diesel 1997 onHeavy Duty - Rate Increased(Length - 1370mm)

1PAIR


SHOCK ABSORBERS





LEAF SPRINGS

TRIT-3+2-R35mm Heavy Duty 4 + 1 Leaves

Recreational / Medium Load - GVM 2

TRIT-003-R 40mm Extra Heavy Duty 4 + 2 Leaves Constant Load / 300kg - GVM 2

U-BOLTS

UB43-671 Heavy Duty 72mm dia. pre 02/2005 4

UB45-451 Heavy Duty 77mm dia. 02/2005 on 4



SHACKLE BUSH KITS






** 55

MIT

SU

BIS

HI

TRITONMODEL: ML SPECIFIC: Ute/Dual Cab

YEAR: 2006 on NOTE: Models with Automatic Transmission Only

SUSPENSION: Coil Spring Front/Leaf Spring Rear ENGINE: All Variants


SHOCK ABSORBERS



COIL SPRINGS


C43-190 45mm Linear Rate / Heavy Duty 50-100kg Accessories

1PAIR


SHOCK ABSORBERS



LEAF SPRINGS

MIT-31CF 35mm Medium Duty - 4 + 1 LeavesRecreational / Medium Load - GVM 2

L43-015-R 45mm Heavy Duty - 4 + 2 Leaves Tradesman / 100kg - GVM 2

L43-016-R 45mm Extra Heavy Duty - 5 + 2 Leaves Constant Load / 350kg - GVM 2

U-BOLTS




SHACKLE BUSH KITS

SPF2294C2KRear Spring Front EyeSuits MIT-31CF Leaf Spring 1

SPF0192C2K Rear Spring Lower Rear EyeSuits MIT-31CF Leaf Spring 1

SPF0187C2K Rear Spring Upper ShackleSuits MIT-31CF Leaf Spring 1

KIT143C2K Rear Shackle Bush Complete KitSuits L45-015-R, L45-016-R & OE Leaf Spring 1


NIS

SA

N

720 SERIESMODEL: 720 SPECIFIC: Ute

YEAR: 1/82-1985



SHOCK ABSORBERS


REARSHOCK ABSORBERS


FRONTIERMODEL: Single Cab SPECIFIC: Single Cab Ute

YEAR: 1998-2001



SHOCK ABSORBERS


REARSHOCK ABSORBERS


Notes



** 57

FRONTIER

NIS

SA

NMODEL: Crew/Dual Cab SPECIFIC: Dual Cab

YEAR: 2000-2004



SHOCK ABSORBERS


TORSION BARS


(Length - 892mm)1

PAIR


SHOCK ABSORBERS


LEAF SPRINGS

NAV-4WD-R 40mm Heavy Duty - 4 + 1 Leaves Recreational 2

NAV-005-R 40mm Extra Heavy Duty - 4 + 2 Leaves Constant Load / 200kg - GVM 2

U-BOLTS




SHACKLE BUSH KITS


SPF0203C2K Rear Spring Upper & Lower Rear Eye 1


NIS

SA

N

NAVARA

Notes

MODEL: D21 SPECIFIC: Ute

YEAR: 1986-2/97



SHOCK ABSORBERS


REARSHOCK ABSORBERS



MODEL: D22 SPECIFIC: Ute

YEAR: 3/97-1999 NOTE: Single Cab Only



SHOCK ABSORBERS


REARSHOCK ABSORBERS




** 59

NAVARA

NIS

SA

NMODEL: D22 SPECIFIC: Dual Cab Ute

YEAR: 1999-2006 NOTE: Dual Cab Only



SHOCK ABSORBERS


TORSION BARS


(Length - 892mm)1

PAIR


SHOCK ABSORBERS


LEAF SPRINGS

NAV-4WD-R 40mm Heavy Duty - 4 + 1 Leaves Recreational 2

NAV-005-R 40mm Extra Heavy Duty - 4 + 2 Leaves Constant Load / 200kg - GVM 2

U-BOLTS




SHACKLE BUSH KITS


SPF0203C2K Rear Spring Upper & Lower Rear Eye 1


NIS

SA

N

NAVARAMODEL: D40 SPECIFIC: Ute/Dual Cab

YEAR: 11/2005 on



SHOCK ABSORBERS



COIL SPRINGS

C45-256 40mm Linear Rate / Heavy DutyUp to 50kg of Accessories

1PAIR

C45-254 40mm Linear Rate / Heavy Duty50-100kg of Accessories

1PAIR


SHOCK ABSORBERS


NM442(See Note)

0-50mm 41mm Bore Nitrogen Gas Cell TechnologyNote: Excluding STX Model with ABS 2

NM654M1*(See Note)

0-50mm 41mm Bore Nitrogen Gas Cell TechnologyNote: STX Models with ABS 2

LEAF SPRINGS

NIS-14C45mm Heavy Duty - 5 + 2 Leaves

Recreational / Light Load - GVM 2



U-BOLTS

UB59-667 Use with L45-003-R & NIS-14C Leaf springs 4

UB59-453-2 Use with L45-004-R Leaf Springs 4



SHACKLE BUSH KITS

KIT141C2K Rear Shackle Bush Complete Kit 1



** 61

PATHFINDER

NIS

SA

NMODEL: WD21 SPECIFIC: Wagon

YEAR: 12/86-1995

SUSPENSION: Torsion Bar Front/Coil Spring Rear ENGINE: All Variants


SHOCK ABSORBERS


TORSION BARS


(Length - 1232mm)1

PAIR

STEERING DAMPER

14035** Generic Oil Filled Replacement 1


SHOCK ABSORBERS


COIL SPRINGS


1PAIR

MODEL: R50 SPECIFIC: Wagon

YEAR: 11/95-11/98



SHOCK ABSORBERS

36051G STD Nitrogen Gas Charged

RH Side (12mm x 25.5 Thread) 1


LH Side (12mm x 25.5 Thread) 1

REARSHOCK ABSORBERS



NIS

SA

N

PATHFINDERMODEL: R50 ST (See Note) SPECIFIC: ST Wagon

YEAR: 2/99-10/01 NOTE: Excluding ABS & Ti Wagon



SHOCK ABSORBERS


RH Side (12mm x 47.5 Thread) 1


LH Side (12mm x 47.5 Thread) 1

REARSHOCK ABSORBERS


MODEL: R51 (WD40) SPECIFIC: Wagon

YEAR: 2005 on

SUSPENSION: Coil Spring Front/Coil Spring Rear ENGINE: V6 Petrol & Turbo Diesel


SHOCK ABSORBERS



COIL SPRINGS

C45-254 40mm Linear Rate / Heavy DutyUp to 50kg of Accessories

1PAIR


SHOCK ABSORBERS


COIL SPRINGS




** 63

PATROL

NIS

SA

NMODEL: G60 SPECIFIC: All Variant

YEAR: 1961-1979



SHOCK ABSORBERS



STEERING DAMPER


REARSHOCK ABSORBERS



MODEL: MK/MQ SPECIFIC: All Variants

YEAR: 1980-1988



SHOCK ABSORBERS



STEERING DAMPER


REARSHOCK ABSORBERS



NIS

SA

N

PATROLMODEL: GQ (Y60) SPECIFIC: LWB Wagon

YEAR: 08/1987 on NOTE: For 100mm (4”) Lift refer Page 66

SUSPENSION: Coil Spring Front/Coil Spring Rear ENGINE: 3.0L, 4.2L Petrol & 2.8L TD


SHOCK ABSORBERS





C45-102 50mmLinear Rate - Heavy Duty 3L Petrol with 50-80kg Accessories4.2L Petrol & 2.8L TD with 50kg Accessories

1PAIR

C45-108 50mm Linear Rate - Heavy Duty 4.2L Petrol with 80-120kg Accessories

1PAIR


KPR004


1



STEERING DAMPER

SS232 1987-8/89 35mm Big Bore Gas Cell Technology 1



SHOCK ABSORBERS





C45-129 50mm Linear Rate - Heavy Duty - 250kg - GVM 1PAIR



1



** 65

PATROL

NIS

SA

NMODEL: GQ (Y60) SPECIFIC: SWB Wagon

YEAR: 02/1988 on NOTE: For 100mm (4”) Lift refer Page 66

SUSPENSION: Coil Spring Front/Coil Spring Rear ENGINE: 3.0L, 4.2L Petrol & 2.8L TD


SHOCK ABSORBERS







KPR004


1



STEERING DAMPER




SHOCK ABSORBERS







1


NIS

SA

N

PATROLMODEL: GQ (Y60) 100mm (4”) Lift SPECIFIC: SWB & LWB Wagon

YEAR: 08/1987 on NOTE: Suspension Components listed on this page are for Off-Road use only

SUSPENSION: Coil Spring Front/Coil Spring Rear ENGINE: All VariantsDisclaimer: Raw 4x4 will not accept any responsibility for personal injury or property breakage resulting from the fitment of any products listed on this page.Warranty: Engineers certificate required for warranty validation.


SHOCK ABSORBERS





KPR004


1



STEERING DAMPER




SHOCK ABSORBERS



C45-113T 100mm Linear Rate - Heavy Duty 1PAIR



1



** 67

PATROL

NIS

SA

NMODEL: GQ (Y60) SPECIFIC: Ute & Cab Chassis

YEAR: 02/88-1999



SHOCK ABSORBERS



LEAF SPRINGS

Y60-8L-F 45mm Heavy Duty - 8 Leaves

With 50-100kg Accessories 2

U BOLTS




SHACKLE PINS


SHACKELE BUSH KITS


STEERING DAMPER




SHOCK ABSORBERS



LEAF SPRINGS





U BOLTS




SHACKLE PINS


SHACKLE BUSH KITS



NIS

SA

N

PATROLMODEL: GQ (Y60) SPECIFIC: Ute & Cab Chassis

YEAR: 1992-5/99



SHOCK ABSORBERS





C45-102 45mm Linear Rate - Heavy Duty With 50kg Accessories

1PAIR


KPR004


1



STEERING DAMPER



SHOCK ABSORBERS




C45-103 45mm Linear Rate - Heavy Duty Medium Load - GVM

1PAIR

C45-105T 45mm Linear Rate - Heavy Duty450kg - GVM

1PAIR



1



** 69

PATROL

NIS

SA

NMODEL: GU (Y61) Series l, ll & lll SPECIFIC: LWB Wagon

YEAR: 12/1997 on ENGINE: 2.8L, 3.0L T/Diesel & 4.2L Non T/Diesel

SUSPENSION: Coil Spring Front/Coil Spring Rear NOTE: For 100mm (4”) Lift refer Page 72


SHOCK ABSORBERS






C45-130 40mm Linear Rate - Heavy Duty With 60-100kg Accessories

1PAIR


KPR004 12/97-8/01(Series l & ll) Recommended fitment for vehicles with

raised suspensions to prevent axle shift and increase stability

1

KPR028 9/2001 on(Series lll) 1



STEERING DAMPER




SHOCK ABSORBERS




C45-103 45mm Linear Rate - Heavy DutyMedium Load - GVM

1PAIR


1PAIR




1



NIS

SA

N

PATROLMODEL: GU (Y61) Series l, ll & lll SPECIFIC: LWB Wagon

YEAR: 12/1997 on ENGINE: 4.5L, 4.8L Petrol & 4.2L Turbo Diesel



SHOCK ABSORBERS







1PAIR


KPR004 12/97-8/01 (Series l & ll) Recommended fitment for vehicles with


1

KPR028 9/2001 on (Series lll) 1



STEERING DAMPER




SHOCK ABSORBERS





1PAIR


1PAIR




1




** 71

PATROL

NIS

SA

NMODEL: GU (Y61) Series l, ll & lll SPECIFIC: SWB Wagon

YEAR: 12/1997 on ENGINE: All Variants



SHOCK ABSORBERS









1




STEERING DAMPER




SHOCK ABSORBERS








1



NIS

SA

N

PATROLMODEL: GU (Y61) 100mm (4”) Lift SPECIFIC: SWB & LWB Wagon




SHOCK ABSORBERS







1




STEERING DAMPER

SS173 12/97- 4/00 35mm Big Bore Gas Cell Technology 1



SHOCK ABSORBERS



C45-113T 100mm Linear Rate - Heavy Duty 1PAIR

C45-313T 100mm Extra Heavy Duty 1PAIR




1




** 73

PATROL

NIS

SA

NMODEL: GU (Y61) SPECIFIC: Ute/Cab Chassis

YEAR: 1999 on NOTE: Non Turbo Models Only

SUSPENSION: Coil Spring Front/Leaf Spring Rear ENGINE: 4.2L Diesel


SHOCK ABSORBERS




COIL SPRINGS


C45-13050mm Linear Rate / Heavy Duty

No Accessories1

PAIR

40mm Linear Rate / Heavy DutyUp to 60kg Accessories

1PAIR

STEERING DAMPER



SHOCK ABSORBERS



LEAF SPRINGS

Y60-6+2-R RH 50mmRH SideHeavy Duty - 6 + 2 LeavesConstant Load / 300kg - GVM

1

Y60-6+2-R LH 50mmLH SideHeavy Duty - 6 + 2 LeavesConstant Load / 300kg - GVM

1

U-BOLTS




SHACKLE PINS


SHACKLE BUSH KITS

SPF2260C2K Rear Shackle Bush Complete Kit 1


NIS

SA

N

PATROLMODEL: GU (Y61) SPECIFIC: Ute/Cab Chassis

YEAR: 1999 on NOTE: Turbo Models Only

SUSPENSION: Coil Spring Front/Leaf Spring Rear ENGINE: 4.2L Turbo Diesel


SHOCK ABSORBERS




COIL SPRINGS

C45-130 30mm Linear Rate / Heavy DutyUp to 50kg Accessories

1PAIR

C45-134 45mm Linear Rate / Heavy Duty60-100kg Accessories

1PAIR

STEERING DAMPER



SHOCK ABSORBERS



LEAF SPRINGS

Y60-6+2-R RH 50mmRH SideHeavy Duty - 6 + 2 LeavesConstant Load / 300kg - GVM

1

Y60-6+2-R LH 50mmLH SideHeavy Duty - 6 + 2 LeavesConstant Load / 300kg - GVM

1

U-BOLTS




SHACKLE PINS


SHACKLE BUSH KITS

SPF2260C2K Rear Shackle Bush Complete Kit 1



** 75

PATROL

NIS

SA

NMODEL: GU (Y61) SPECIFIC: Ute/Cab Chassis

YEAR: 1999 on ENGINE: 2.8L Turbo Diesel

SUSPENSION: Coil Spring Front/Coil Spring Rear 4.2L Non Turbo Diesel


SHOCK ABSORBERS







1PAIR


KPR004 1999-8/01 (Series l & ll) Recommended fitment for vehicles with


1




STEERING DAMPER



SHOCK ABSORBERS





C45-105 45mm Linear Rate - Heavy DutyConstant Load / 450kg - GVM

1PAIR




1



NIS

SA

N

PATROLMODEL: GU (Y61) SPECIFIC: Ute/Cab Chassis

YEAR: 1999 on ENGINE: 4.5L & 4.8L Petrol

SUSPENSION: Coil Spring Front/Coil Spring Rear 4.2L Turbo Diesel


SHOCK ABSORBERS







1PAIR




1




STEERING DAMPER



SHOCK ABSORBERS





C45-105 45mm Linear Rate - Heavy DutyConstant Load / 450kg - GVM

1PAIR




1




** 77

TERRANO l

NIS

SA

NMODEL: WD21 SPECIFIC: Wagon

YEAR: 10/1987



SHOCK ABSORBERS


TORSION BARS


(Length - 1232mm)1

PAIR

STEERING DAMPER

14035** Generic Oil Filled Replacement 1


SHOCK ABSORBERS


COIL SPRINGS


1PAIR

MODEL: JLR50, JRR50, LR50, PR50, TR50 SPECIFIC: Wagon

YEAR: 11/95-10/02 NOTE: Excluding ABS & Ti Wagon



SHOCK ABSORBER

36051G STDNitrogen Gas ChargedRH Side (12mm x 25.5 Thread)up to 02/1999

1

36052G STDNitrogen Gas ChargedLH Side (12mm x 25.5 Thread)up to 02/1999

1

36054G STDNitrogen Gas ChargedRH Side (12mm x 47.5 Thread)1999-2001

1

36055G STDNitrogen Gas ChargedLH Side (12mm x 47.5 Thread)1999-2001

1

REARSHOCK ABSORBER

G6012M1Y STD 35mm Bore Nitrogen Gas Charged1995-2/99 2

G6014M2Y STD 35mm Bore Nitrogen Gas Charged2/99-10/02 (ST Models Only) 2


NIS

SA

N

TERRANO llMODEL: R20 SPECIFIC: Wagon

YEAR: 03/1997 on



SHOCK ABSORBERS


TORSION BARS


(Length - 1232mm)1

PAIR


SHOCK ABSORBERS


COIL SPRINGS


1PAIR

Notes



** 79

SERIES l

RA

NG

ER

OV

ERMODEL: 3.5L, 3.9L V8 SPECIFIC: Wagon

YEAR: 1972-8/94



SHOCK ABSORBERS



COIL SPRINGS

C51-014 45mm Linear Rate - Heavy Duty NO Accessories

1PAIR

C51-018 45mm Linear Rate - Heavy Duty Petrol with 50kg Accessories

1PAIR

STEERING DAMPER



SHOCK ABSORBERS



COIL SPRINGS

C51-01545mm Linear Rate - Heavy Duty 1

PAIR

C51-022 45mm Linear Rate - Heavy Duty 150Kg to GVM

1PAIR


RA

NG

ER

OV

ER

RANGEROVER SERIES llSERIES ll SPECIFIC: Wagon

YEAR: 5/95-2000 NOTE: Excluding HSE 4.6L V8

SUSPENSION: Coil Spring Front/Coil Spring Rear ENGINE: 4.0L V8



REAR


MODEL: ML3, ML7 SPECIFIC: Wagon

YEAR: 5/95-2000 NOTE: Excluding HSE 4.6L V8

SUSPENSION: Air Susp. Front/Air Susp. Rear ENGINE: 4.0L V8



REAR


SSANGYONGMODEL: MUSSO SPECIFIC: Wagon

YEAR: 7/96-2002 SUSPENSION: Torsion Bar Front/Coil Spring Rear


SHOCK ABSORBERS


G6031BY 50mm 35mm Bore Nitrogen Gas Charged 2

REARSHOCK ABSORBERS

G320 STD 35mm Bore Nitrogen Gas Charged 2


MODEL: MUSSO SPORTS UTE SPECIFIC: UTE

YEAR: 2004 ON SUSPENSION: Torsion Bar Front/Coil Spring Rear



REAR


SS

AN

GY

ON

G



** 81

SANTANA / SIDEKICK

SU

ZU

KI

MODEL: 3 & 5 DOOR SPECIFIC: SWB & LWB

YEAR: 7/88-2000



SHOCK ABSORBERS

G68518** STD Nitrogen Gas Charged 2

REARSHOCK ABSORBERS


SIERRA / SAMURAIMODEL: SJ410 (SJ40) & SJ413 (SJ50 & SJ70) SPECIFIC: Soft Top/Hard Top

YEAR: 7/81-1996



SHOCK ABSORBERS



SHOCK ABSORBERS


VITARAMODEL: 5 DOOR SPECIFIC: LWB & SWB

YEAR: 7/88-2000



SHOCK ABSORBERS

G68518** STD Nitrogen Gas Charged 2

REARSHOCK ABSORBERS



TO

YO

TA

BUNDERAMODEL: LJ70, LJ73 / RJ70, RJ73 SPECIFIC: Soft Top/Hard Top

YEAR: 11/84-12/89



SHOCK ABSORBERS


COIL SPRINGS


1PAIR

STEERING DAMPER



SHOCK ABSORBERS

G6010M1Y 0-50mm 35mm Bore Nitrogen Gas Charged

RH Side 2

G6019M5Y 0-50mm 35mm Bore Nitrogen Gas Charged

LH Side 2

COIL SPRINGS

C59-083 50mm Linear Rate / Heavy DutyRecreational - Medium Load - GVM

1PAIR

Notes



** 83

LANDCRUISER ll

TO

YO

TAMODEL: RJ77/KZJ78/LJ78, LJ79 SPECIFIC: Wagon

YEAR: 1987/1996

SUSPENSION: Coil Spring Front/Coil Spring Rear ENGINE: 2.4L Petrol & 2.4L T/D


SHOCK ABSORBERS

T256 STD 41mm Bore RFX 3 way Adjustable 2


COIL SPRINGS


1PAIR


1PAIR


SHOCK ABSORBERS

T257 STD 41mm Bore RFX 3 way Adjustable 2



COIL SPRINGS

C59-289 45mm Linear Rate / Heavy DutyLight Load - GVM

1PAIR


1PAIR

Notes


TO

YO

TA

4 RUNNER / SURFMODEL: LN60/YN60 SPECIFIC: Wagon

YEAR: 3/84-8/85



SHOCK ABSORBERS


T110Y 50mm 41mm Bore RFX 3 way Adjustable 2

STEERING DAMPER



SHOCK ABSORBERS




MODEL: LN61/YN63 SPECIFIC: Wagon

YEAR: 8/85-1989



SHOCK ABSORBERS


STEERING DAMPER



SHOCK ABSORBERS




** 85

4 RUNNER / SURF

TO

YO

TAMODEL: LN130, RN130, YN130, VZN130 SPECIFIC: Wagon

YEAR: 1989-7/96

SUSPENSION: Torsion Bar Front /Coil Spring Rear


SHOCK ABSORBERS


TORSION BARS


(Length - 1064mm)1

PAIR

STEERING DAMPER



SHOCK ABSORBERS


COIL SPRINGS


C59-165 50mm Linear Rate / Extra Heavy Duty150kg - GVM

1PAIR

Notes


FORTUNER

TO

YO

TA MODEL: KUN51, TGN51

YEAR: 2005 on


SPECIFIC : Wagon


SHOCK ABSORBERS

CS324Y 0-50mm 46mm Bore Monotube Nitrogen Gas Charged 2

COIL SPRINGS

2.7Lt Petrol

C59-274 25mm Linear Rate / Raised Height1

PAIR

C59-276 50mm Linear Rate / Raised Height50 - 100kg Accessories

1PAIR

COIL SPRINGS

3.0Lt Diesel


PAIR

C59-134 40mm Linear Rate / Raised Height50 - 100kg Accessories

1PAIR


SHOCK ABSORBERS


COIL SPRINGS


PAIR



** 87

TO

YO

TA

HILUXMODEL: LN36, RN36/LN46, RN46 SPECIFIC: Ute/Dual Cab

MODEL: LN36, RN36/LN46, RN46

YEAR: 01/79-7/83



SHOCK ABSORBERS



STEERING DAMPER



SHOCK ABSORBERS



MODEL: LN65, YN65/LN67, YN67 SPECIFIC: Ute/Dual Cab

YEAR: 08/83-8/88



SHOCK ABSORBERS




STEERING DAMPER



SHOCK ABSORBERS






HILUX

TO

YO

TA MODEL: LN105, RN105/LN106, RN106 SPECIFIC: Single Cab Ute

YEAR: 8/88-11/97 NOTE: For Diesel & Dual Cab Models refer next page

SUSPENSION: Leaf Spring Front/Leaf Spring Rear ENGINE: Petrol Models Only

FRONT PART NO. HEIGHT SPECIFICATION/RATING QTYSHOCK ABSORBERS




LEAF SPRINGS

HIL-002-F RH50mm

Front RH Side / Petrol - 50kg Accessories 1

HIL-002-F LH Front LH Side / Petrol - 50kg Accessories 1

U BOLTS

UB59-437 Front RH Side / Heavy Duty 1

UB59-449-3 Front RH Side / Heavy Duty 1

UB59-667 Front LH Side / Heavy Duty 2



SHACKLE PINS


SHACKLE BUSH KITS

SPF2231-8C2K Front Spring Eye - Polyurethane 1

SPF2240C2K Front Spring Shackle - Polyurethane 1

STEERING DAMPER


REAR PART NO. HEIGHT SPECIFICATION/RATING QTYSHOCK ABSORBERS





LEAF SPRINGS

106-5+3-R 50mm 5 + 3 Leaves / 200kg - GVM 2

U BOLTS




SHACKLE PINS


SHACKLE BUSH KITS

SPF2231C2K Rear Complete Kit - Polyurethane 1



** 89

TO

YO

TA

HILUXMODEL: LN105, RN105/LN106, RN106 SPECIFIC: Diesel Ute/Dual Cab

YEAR: 8/88-11/97 ENGINE: Single Cab Diesel & Dual Cab All

SUSPENSION: Leaf Spring Front/Leaf Spring Rear NOTE: Single Cab Petrol refer previous page




NM611* 50-75mm 41mm Bore Nitrogen Gas Cell Technology 2

LEAF SPRINGS

HIL-003-F RH50mm

Front RH Side / with 50kg Accessories 1

HIL-003-F LH Front LH Side / with 50kg Accessories 1

U BOLTS

UB59-437 Front RH Side / Heavy Duty 1

UB59-449-3 Front RH Side / Heavy Duty 1

UB59-667 Front LH Side / Heavy Duty 2



SHACKLE PINS


SHACKLE BUSH KITS

SPF2231-8C2K Front Spring Eye - Polyurethane 1

SPF2240C2K Front Spring Shackle - Polyurethane 1

STEERING DAMPER







LEAF SPRINGS

106-5+3-R 50mm 5 + 3 Leaves / 200kg - GVM 2

U BOLTS




SHACKLE PINS


SHACKLE BUSH KITS



HILUX

TO

YO

TA


SHOCK ABSORBERS



STEERING DAMPER


TORSION BARS


(Length - 1064mm)1

PAIR


SHOCK ABSORBERS



NM626M3 STD 41mm Bore Nitrogen Gas Cell Technology 2


LEAF SPRINGS

THX-04CF 45mm Light Duty 5 + 1 Leaves Recreational 2

HIL-034-R 45mm Medium Duty 4 + 2 Leaves Light Load - GVM 2

HIL-035-R 45mm Extra Heavy Duty 4 + 2 Leaves Constant Load / 200kg - GVM 2

U-BOLTS




SHACKLE BUSH KITS


SPF2231-4C2K Rear Spring Lower Rear Eye 1


MODEL: RN106, LN107, LN108, LN/RN/YN110, LN111

YEAR: 10/88-1997


SPECIFIC: Ute/Dual Cab



** 91

TO

YO

TA

HILUX


SHOCK ABSORBERS



STEERING DAMPER


TORSION BARS


(Length - 1064mm)1

PAIR


SHOCK ABSORBERS



NM626M3 STD 41mm Bore Nitrogen Gas Cell Technology 2


LEAF SPRINGS

THX-04CF 45mm Light Duty 5 + 1 Leaves Recreational 2

HIL-034-R 45mm Medium Duty 4 + 2 Leaves Light Load - GVM 2

HIL-035-R 45mm Extra Heavy Duty 4 + 2 Leaves Constant Load / 200kg - GVM 2

U-BOLTS




SHACKLE BUSH KITS


SPF2231-4C2K Rear Spring Lower Rear Eye 1


YEAR: 10/97-2005


SPECIFIC: Ute/Dual CabMODEL: KZN/LN/RN/VZN165, 166, 167, RZN169, LN170, 172, RZN174R


HILUX / VIGO

TO

YO

TA MODEL: GGN, KUN25/GGN, KUN26 SPECIFIC: Ute/Dual Cab

YEAR: 2005 on



SHOCK ABSORBERS


COIL SPRINGS

C59-296 50mm Linear Rate / Heavy DutyNo Accessories

1PAIR

C59-300 50mm Linear Rate / Heavy DutyWith Accessories

1PAIR


SHOCK ABSORBERS



LEAF SPRINGS

THX-04VF-D/S50mm Heavy Duty - 5 + 1 Leaves

Recreational / Light Load - GVM

1

THX-04VF-N/S 1



U-BOLTS

UB59-453-2 Heavy Duty (use with THX-04VF & L59-041-R) 4

UB59-437 Heavy Duty (use with L59-042-R) 4



SHACKLE BUSH KITS






** 93

TO

YO

TA

LANDCRUISER - 40 SERIESMODEL: BJ40, 42, 45, 46 SPECIFIC: SWB & LWB (All Variants)

YEAR: 02/74-1985



SHOCK ABSORBERS



STEERING DAMPER



SHOCK ABSORBERS


MODEL: FJ40, HJ40 SPECIFIC: SWB & LWB (All Variants)

YEAR: 1959-01/75 NOTE: For post 01/75 models refer next page



SHOCK ABSORBERS



STEERING DAMPER



SHOCK ABSORBERS




LANDCRUISER - 40 SERIES

TO

YO

TA MODEL: FJ40, HJ40 SPECIFIC: SWB & LWB (All Variants)

YEAR: 01/75-10/84 NOTE: For pre 01/75 models refer previous page



SHOCK ABSORBERS



STEERING DAMPER



SHOCK ABSORBERS


MODEL: FJ45, HJ45 & HJ47 SPECIFIC: SWB & LWB (All Variants)

YEAR: 1961-10/84



SHOCK ABSORBERS



STEERING DAMPER



SHOCK ABSORBERS




** 95

TO

YO

TA

LANDCRUISER - 55 & 60 SERIESMODEL: FJ55 SPECIFIC: Wagon

YEAR: 1969-8/80



SHOCK ABSORBERS




STEERING DAMPER



SHOCK ABSORBERS




MODEL: FJ60, FJ62/HJ60, HJ61 SPECIFIC: Wagon

YEAR: 8/80-10/85



SHOCK ABSORBERS




STEERING DAMPER



SHOCK ABSORBERS






TO

YO

TA MODEL: FJ60, FJ62/HJ60, HJ61 SPECIFIC: Wagon

YEAR: 10/85-1990





LEAF SPRINGS

HJ60-6L-F 45mm Heavy Duty / Petrol with Accessories 2

HJ60-7L-F 45mm Heavy Duty / Diesel with Accessories 2

U BOLTS




SHACKLE PINS


SHACKLE BUSH KITS

SPF2260C2K Front Complete Kit - Polyurethane 1

STEERING DAMPER






LEAF SPRINGS

HJ60-7L-R RH 45mm Rear RH Side - 7 leaves + 1 Spacer Leaf 1

HJ60-7L-R LH 45mm Rear LH Side - 7 leaves + 1 Spacer Leaf 1

U BOLTS




SHACKLE PINS


SHACKLE BUSH KITS




** 97

MODEL: FJ/BJ70, BJ71,FJ/BJ73,FJ/BJ74

YEAR: 1985-12/1989


SPECIFIC: Mid Wheel Base

TO

YO

TA







LEAF SPRINGS

HJ75-8L-F 50mm Heavy Duty - 8 Leaves 40-70kg Accessories 2

U BOLTS




SHACKLE PINS


SHACKLE BUSH KITS


STEERING DAMPER







LEAF SPRINGS

HJ60-7L-R RH 50mm Heavy Duty - 7 + 1 Leaves / Light Load 1

HJ60-7L-R LH 50mm Heavy Duty - 7 + 1 Leaves / Light Load 1

HJ61-7L-R RH 50mm Heavy Duty - 7 + 1 Leaves RHS / 150kg - GVM 1

HJ61-7L-R LH 50mm Heavy Duty - 7 + 1 Leaves LHS / 150kg - GVM 1

U BOLTS




SHACKLE PINS


SHACKLE BUSH KITS




TO

YO

TA

MODEL: BJ75, FJ75, HJ75

YEAR: 11/84-01/90


SPECIFIC: Cab Chassis & Troop Carrier






LEAF SPRINGS

HJ75-7L-F 45mm Heavy Duty - 7 Leaves No Accessories 2

HJ75-8L-F 50mm Heavy Duty - 8 Leaves 40-70kg Accessories 2

U BOLTS




SHACKLE PINS


SHACKLE BUSH KITS


STEERING DAMPER







LEAF SPRINGS

HJ75-7+2-R 50mm Heavy Duty - 7 + 2 LeavesTradesman / 300kg - GVM 1

HJ75-8+2-R 50mm Heavy Duty - 8 + 2 LeavesConstant Load / 500kg - GVM 1

U BOLTS




SHACKLE PINS


SHACKLE BUSH KITS




** 99

TO

YO

TA

LANDCRUISER - 75 SERIESMODEL: FZJ75, HZJ75 SPECIFIC: Cab Chassis & Troop Carrier

YEAR: 10/91-09/99







LEAF SPRINGS

HZJ75-7L-F 50mm Heavy Duty - 7 Leaves With no Accessories 2

HZJ75-8L-F 50mm Heavy Duty - 8 Leaves 40-70kg Accessories 2

U BOLTS




SHACKLE PINS


SHACKLE BUSH KITS


STEERING DAMPER







LEAF SPRINGS

HZJ75-7+2-R 50mm Heavy Duty - 7 + 2 LeavesTradesman / 300kg - GVM 1

HZJ75-8+2-R 50mm Heavy Duty - 8 + 2 LeavesConstant Load / 500kg - GVM 1

U BOLTS




SHACKLE PINS


SHACKLE BUSH KITS




TO

YO

TA MODEL: VDJ76 SPECIFIC: Wagon

YEAR: 02/2007 on

SUSPENSION: Coil Spring Front/Leaf Spring Rear ENGINE: V8 Turbo Diesel


SHOCK ABSORBERS




COIL SPRINGS

C59-248 50mm Linear Rate / Heavy Duty80kg of Accessories

1PAIR


1PAIR

STEERING DAMPER



SHOCK ABSORBERS




LEAF SPRINGS

L59-020-R 45mm Heavy Duty - 4 + 2 LeavesRecreational / Light Load - GVM 2



U-BOLTS

UB59-453-3 Heavy Duty (use with L59-020-R & L59-021-R) 4

UB59-453-1 Heavy Duty (use with L59-022-R) 4



SHACKLE PINS


SHACKLE BUSH KITS

KIT087C2K Rear Complete Kit - Polyurethane 1



** 101

TO

YO

TA

LANDCRUISER - 78 SERIESMODEL: FZJ78, HZJ78, VDJ78 SPECIFIC: Troop Carrier

YEAR: 09/1999



SHOCK ABSORBERS




COIL SPRINGS


1PAIR


1PAIR

STEERING DAMPER

SS214 9/99-04/07 35mm Big Bore Gas Cell TechnologyFZJ78 & HZJ78 1

SS656* 04/2007 on 35mm Big Bore Gas Cell TechnologyVDJ78 (V8 DIESEL ENGINE) 1


SHOCK ABSORBERS




LEAF SPRINGS

TOY-082-R 55mm Heavy Duty - 6 + 2 LeavesRecreational / Medium Load - GVM 2

TOY-083-R 55mm Heavy Duty - 7 + 2 Leaves Tradesman / 300kg - GVM 2

TOY-084-R 55mm Extra Heavy Duty - 8 + 2 Leaves Constant Load / 500kg - GVM 2

U-BOLTS

UB59-416 Heavy Duty (Use With TOY-083 & 084-R) 4

UB59-453-1 Heavy Duty (Use With TOY-082-R) 4

SPRING SHACKLE HANGERSG


SHACKLE PINS


SHACKLE BUSH KITS




TO

YO

TA MODEL: FZJ79, HDJ79, HZJ79, VDJ79 SPECIFIC: Ute & Cab Chassis

YEAR: 09/1999 on



SHOCK ABSORBERS




COIL SPRINGS


1PAIR


1PAIR

STEERING DAMPER

SS214 9/99-04/07 35mm Big Bore Gas Cell TechnologyFZJ79 & HZJ79 1

SS656 04/2007 on 35mm Big Bore Gas Cell TechnologyVDJ79 (V8 DIESEL ENGINE) 1


SHOCK ABSORBERS




LEAF SPRINGS

TOY-082-R 55mm Heavy Duty - 6 + 2 LeavesRecreational / Medium Load - GVM 2

TOY-083-R 55mm Heavy Duty - 7 + 2 Leaves Tradesman / 300kg - GVM 2

TOY-084-R 55mm Extra Heavy Duty - 8 + 2 Leaves Constant Load / 500kg - GVM 2

U-BOLTS

UB59-416 See Note NOTE: Use With TOY-083 & 084-R 4

UB59-453-1 See Note NOTE: Use with TOY-082-R 4



SHACKLE PINS


SHACKLE BUSH KITS




** 103

TO

YO

TA

LANDCRUISER - 80 SERIESMODEL: FJ80, HDJ80, HZJ80 SPECIFIC: Wagon

YEAR: 05/90-08/91 NOTE: For 75mm (3”) & 100mm (4”) Lift refer page 104



SHOCK ABSORBERS




C59-166 45mm Linear Rate - Heavy Duty Up to 50kg Accessories

1PAIR

C59-170 50mm Linear Rate - Extra Heavy Duty 50-110kg Accessories

1PAIR



1



STEERING DAMPER



SHOCK ABSORBERS





1PAIR


1PAIR



1



TO

YO

TA MODEL: FJ80, HDJ80, HZJ80 SPECIFIC: Wagon

YEAR: 08/91-03/98 NOTE: For 75mm (3”) & 100mm (4”) Lift refer page 104



SHOCK ABSORBERS




C59-168 45mm Linear Rate - Heavy Duty / Up to 100kg Access.1

PAIR

C59-166 60mm Linear Rate - Heavy Duty / 0-50kg Access.1

PAIR



1



STEERING DAMPER




SHOCK ABSORBERS




C59-169 45mm Linear Rate - Heavy Duty / Medium Load - GVM1

PAIR


PAIR

C59-171 50mm Linear Rate - Heavy Duty / 350kg - GVM1

PAIR



1



** 105

TO

YO

TA

LANDCRUISER - 80 SERIESMODEL: FJ80, HDJ80, HZJ80 75mm (3”) & 100mm (4”) Lift




SHOCK ABSORBERS




PAIR

100mm Linear Rate - Heavy Duty / With NO Access.1

PAIR


PAIR



1



STEERING DAMPER




SHOCK ABSORBERS




PAIR


PAIR



1



TO

YO

TA

MODEL: HDJ100, HZJ100, UZJ100 SPECIFIC: Wagon

YEAR: 1998-11/07 NOTE: For full coil sprung models refer 105 Series

SUSPENSION: Torsion Bar Front /Coil Spring Rear


SHOCK ABSORBERS


TORSION BARS

TB59-16106 Cyl Petrol, Diesel & Turbo DieselHeavy Duty - Rate Increased (Length - 1210mm)

1PAIR

TB59-1600V8 PetrolHeavy Duty - Rate Increased (Length - 1160mm)

1PAIR


SHOCK ABSORBERS


COIL SPRINGS

C59-167 30mm Linear Rate / Heavy DutyRecreational / Medium Load - GVM

1PAIR

C59-185 30mm Linear Rate / Extra Heavy DutyTradesman / 200kg - GVM

1PAIR

C59-171 30mm Linear Rate / Extra Heavy DutyConstant load / 400kg - GVM

1PAIR



1



** 107

TO

YO

TA

LANDCRUISER - 105 SERIESMODEL: FZJ105R, HZJ105R SPECIFIC: Wagon

YEAR: 04/1998 on NOTE: For 75mm (3”) & 100mm (4”) Lift refer page 107



SHOCK ABSORBERS



C59-168 45mm Linear Rate - Heavy Duty / Up to 50kg Access.1

PAIR


PAIR

60mm Linear Rate - Heavy Duty / With NO Access.1

PAIR



1



STEERING DAMPER



SHOCK ABSORBERS




PAIR

C59-167 45mm Linear Rate - Heavy Duty/200-400kg load to GVM1

PAIR

60mm Linear Rate - Heavy Duty/No load1

PAIR



1



TO

YO

TA MODEL: FZJ105R, HZJ105R 75mm (3”) & 100mm (4”) Lift




SHOCK ABSORBERS




PAIR

100mm Linear Rate - Heavy Duty / Without Access.1

PAIR


PAIR



1



STEERING DAMPER



SHOCK ABSORBERS




PAIR


PAIR



1



** 109

TO

YO

TA

LANDCRUISER - 200 SERIESMODEL: GJR200 SPECIFIC: Wagon

YEAR: 11/2007 on

SUSPENSION: Coil Spring Front/Coil Spring Rear ENGINE: 4.0L 6 Cyl Petrol


SHOCK ABSORBERS

CS631Y* 0-50mm 46mm Bore Monotube Nitrogen Gas Charged 2

COIL SPRINGS

C59-540 50mm Linear Rate / Heavy DutyLight Accessories

1PAIR


SHOCK ABSORBERS


COIL SPRINGS

C59-545 50mm Linear Rate / Heavy DutyRecreational - Light Load - GVM

1PAIR

MODEL: UJR200, UZJ200 SPECIFIC: Wagon

YEAR: 11/2007 on

SUSPENSION: Coil Spring Front/Coil Spring Rear ENGINE: 4.7L & 5.7L V8 Petrol


SHOCK ABSORBERS


COIL SPRINGS


1PAIR


1PAIR


SHOCK ABSORBERS


COIL SPRINGS


1PAIR

C59-547 50mm Linear Rate / Heavy DutyTradesman - 350kg - GVM

1PAIR

C59-549 50mm Linear Rate / Heavy DutyConstant Load - 500kg - GVM

1PAIR



TO

YO

TA MODEL: VDJ200 SPECIFIC: Wagon

YEAR: 11/2007 on

SUSPENSION: Coil Spring Front/Coil Spring Rear ENGINE: 4.5L V8 Twin T/Diesel


SHOCK ABSORBERS


COIL SPRINGS


1PAIR


1PAIR


SHOCK ABSORBERS


COIL SPRINGS


1PAIR

C59-547 50mm Linear Rate / Heavy DutyTradesman - 350kg - GVM

1PAIR

C59-549 50mm Linear Rate / Heavy DutyConstant Load - 500kg - GVM

1PAIR

Notes



** 111

Notes

TO

YO

TA

PRADO - 70 SERIES (Landcruiser ll)MODEL: RJ77/KZJ78/LJ78, LJ79 SPECIFIC: 4 door Wagon

YEAR: 1987/1996

SUSPENSION: Coil Spring Front/Coil Spring Rear ENGINE: 2.4L Petrol & 2.4L T/D


SHOCK ABSORBERS



COIL SPRINGS



1PAIR


SHOCK ABSORBERS


G6640Y 45mm 35mm Bore Nitrogen Gas Charged


COIL SPRINGS

C59-289 45mm Linear Rate / Heavy DutyLight Load - GVM


1PAIR


PRADO - 90 SERIES

TO

YO

TA


SHOCK ABSORBERS


COIL SPRINGS

C59-276 35mm Linear Rate / Heavy Duty / Up to 60kg Access.1

PAIR

C59-134 35mm Linear Rate / Heavy Duty / Up to 90kg Access.1

PAIR


SHOCK ABSORBERS


COIL SPRINGS

C59-131 35mm Linear Rate / Heavy Duty / Medium Load - GVM1

PAIR

MODEL: KDJ90, KZJ90, KDJ95, KZJ95 SPECIFIC: Wagon

YEAR: 1996-2003 NOTE: For 2.7L & V6 Models refer above

SUSPENSION: Coil Spring Front/Coil Spring Rear ENGINE: 3.0L T/Diesel


SHOCK ABSORBERS


COIL SPRINGS

C59-134 35mm Linear Rate / Heavy DutyKZJ90 with 60-90kg Accessories

1PAIR

C59-296 35mmLinear Rate / Heavy DutyKDJ90 with 60-90kg AccessoriesKDJ, KZJ95 without Accessories

1PAIR

C59-300 35mm Linear Rate / Heavy DutyKDJ, KZJ95 with 60-90kg Accessories

1PAIR


SHOCK ABSORBERS


COIL SPRINGS

C59-131 35mm Linear Rate / Heavy Duty / Medium Load - GVM1

PAIR

C59-297V 40mm Variable Rate / Heavy Duty / 150kg - GVM1

PAIR

YEAR: 1996-2003 NOTE: For 3.0L T/Diesel Models refer below

SUSPENSION: Coil Spring Front/Coil Spring Rear ENGINE: 2.7L & V6 Petrol

SPECIFIC: WagonMODEL: KDJ90, KZJ90, RZJ90, VZJ90, RZJ95, VZJ95



** 113

TO

YO

TA

PRADO - 120 SERIES


SHOCK ABSORBERS


COIL SPRINGS

C59-302 40mm Linear Rate / Heavy Duty0-50kg Access.

1PAIR

C59-314 45mm Linear Rate / Heavy Duty80-150kg Access.

1PAIR


SHOCK ABSORBERS


COIL SPRINGS

C59-325 50mm Linear Rate / Heavy DutySWB & LWB with Medium Load -GVM

1PAIR

C59-327 50mm Linear Rate / Heavy DutySWB & LWB with 100-300kg Accessories

1PAIR

C59-331 50mm Linear Rate / Heavy DutyLWB only with 400-500kg Accessories

1PAIR

YEAR: 2003 on


MODEL: GRJ120 (4.0Lt V6), KDJ120/121 (3.0Lt Diesel) VZJ120/121 (3.4Lt V6)

SPECIFIC: LWB Wagon& SWB


SHOCK ABSORBERS


COIL SPRINGS


1PAIR


1PAIR


SHOCK ABSORBERS


COIL SPRINGS

C59-325 50mm Linear Rate / Heavy DutySWB & LWB with Medium Load -GVM

1PAIR

C59-327 50mm Linear Rate / Heavy DutySWB & LWB with 100-300kg Accessories

1PAIR

C59-331 50mm Linear Rate / Heavy DutyLWB only with 400-500kg Accessories

1PAIR

MODEL: KZJ120YEAR: 2003 on

SUSPENSION: Coil Spring Front/Coil Spring Rear ENGINE: 3.0Lt T/Diesel

SPECIFIC: LWB& SWB WAGON

114 For further information visit ... www.raw4x4.com.au

COIL SPRING SPACERS

NISSAN PATROL

5mm FRONT PDB560-5PF

10mm PDB570-10PF

20mm PDB571-20PF

30mm PDB572-30PF

5mm REAR PDB573-5PR

10mm PDB574-10PR

20mm PDB575-20PR

30mm PDB576-30PR

TOYOTA LANDCRUISER

5mm FRONT PDB560-5LF

10mm PDB561-10LF

20mm PDB562-20LF

30mm PDB563-30LF

5mm REAR PDB565-5LR

10mm PDB566-10LR

20mm PDB567-20LR

30mm PDB568-30LR

ADJUSTABLE PANHARD RODSNote: Advisable when vehicle is raised above 50mm will assist lower applications by imparting better dynamic stability.

NISSAN PATROL

KPR004 FRONT Nissan Patrol GQ 11/87-97

Nissan Patrol GU SERIES l & 11 12/97-08/01

KPR005 REAR Nissan Patrol GQ 11/87-97

Nissan Patrol GU SERIES l & 11 12/97-08/01

KPR028 FRONT Nissan Patrol GU SERIES lll 9-2001 on

KPR029 REAR Nissan Patrol GU SERIES lll 9-2001 on

TOYOTA LANDCRUISER

KPR007 FRONT Toyota Landcruiser 80/105 SERIES

KPR008 REAR Toyota Landcruiser 80/105 SERIES

Toyota Landcruiser 80/105 SERIES

115IN DEVELOPMENT STD STANDARD B FITTED WITH PROTECTION DUST BOOT QTY (RPV) REQUIRED PER VEHICLE


**

CASTOR BUSH KITS

FOR RAISED VEHICLES WITH FRONT COIL SPRING SUSPENSION

SPF1721KC2 Offset centre hole to increase/decrease Castor setting

For suspensions approximately 50mm raised

SPF1721XKC2 Extra Offset centre hole to increase/decrease Castor setting

For suspensions approximately 70-100mm raised

SUITS THE FOLLOWING VEHICLES

GU (Y61) Wagon, Ute & Cab Chassis

TOYOTA Landcruiser FZJ78, HZJ78, FZJ79, HZJ79, FJ80,

FZJ80, HZJ80, FZJ105R, HZJ105R

LONG TRAVEL SHOCKS

TO SUIT 4” (100mm) RAISED SUSPENSIONS Note: Not recommended for public road use - unless vehicle has Engineering Certificate compliance.

NISSAN PATROL

NM272M1 FRONT GQ, GU Series Coil Spring Front & RearNM503 REAR

TOYOTA LANDCRUISER

NM497 FRONT 80, 105 Series Coil Spring Front & RearNM498 REAR

ADJUSTABLE REAR TRAILING ARMS

TO SUIT 4” (100mm) RAISED SUSPENSIONS

NISSAN PATROL

KTA-106 REAR GQ, GU Patrol


HOW TO MEASURE A SHOCK ABSORBER

1. Determine the configuration.

2. Measure the fully extended & collapsed lengths.

HOW TO MEASURE EYEBROW HEIGHT

Measure the distance from the top centre point of the guard to the centre of the wheel.

117IN DEVELOPMENT STD STANDARD B FITTED WITH PROTECTION DUST BOOT QTY (RPV) REQUIRED PER VEHICLE


**

HOW TO CHECK FOR CORRECT SHOCK APPLICATION

DATE: / / Note: Warranty is void if all details are not completed

DISTRIBUTION’S NAME:

PHONE: FAX:

VEHICLE: (Make/Model/Year)

SUSPENSION: MODIFIED STANDARD

SUSPENSION TYPE Please tick vehicle mounting configuration

STRUT LEAF

COIL TORSION BAR

POSITION

FRONT REAR

Check Static Height: this is done from centre of mounting point top to centre of mounting point bottom (refer drawing).

STEP 1Static Height

Note: Measure when vehicle unloaded and at kerb height

mm

Drawings for illustration purposes only

Bump Stop Clearance: this is done from lower side of rail to top of bump stop (refer drawing).

STEP 2Bump Stop Clearance

Note: Measure when vehicle unloaded and at kerb height

mm


Full Extension of Suspension: this is done by firstly disconnecting lower shock mounts then jack vehicle up, placing stands uner rails, lowering suspension down, then measuring from centre of mounting point to centre of mounting point (refer drawing).

STEP 3 Extension Height of Suspension

mm



Notes

Customer: .......................................................................

Address: ..........................................................................

........................................................................................

Postcode: ................ Tel: ( ) .......................................

ACCESSORIES CHECK LIST(Please tick where appropriate and enter relevant information where requested)

BODY TYPE: Wagon SWB Dual Cab Extra Cab Single Cab

TRAY BODY TYPE: .....Steel .....Aluminium .....Wood

Size: (mm) Length ...................... x Width ..............................

ENGINE TYPE: ...Petrol ...Diesel ...Turbo Diesel ...LPG

ENGINE SIZE: ...4 ...6 ...8 other.................................

BULL BAR: Yes / No .....Steel .....Aluminium .....Plastic

WINCH: ...Electric ...PTO ...Hyd Rated Size..................

DUAL BATTERY: .....Driver Side .....Passenger Side

SIDE RAILS: ....Steel .....Aluminium

OTHER WEIGHT CONTRIBUTING ACCESSORIES: ..........................

..............................................................................................

LPG CONVERSION: .....Yes .....No

Capacity/litres ............................ Location ...................................

Amount in tank at fitment: .....¼ .....½ .....¾ .....Full

AFTER MARKET (FUEL) TANKS: YES / NO

REPLACEMENT TANK: Capacity/litres ................Location ..................


AUXILIARY TANK: Capacity/litres ..................Location .....................


WATER TANK: Capacity/litres ........................Location ....................


....Tow Bar ....Rear Step Tow Bar ....Twin Wheel Carriers

What is normally towed? ............................... Weight/Kgs ..........

SPARE WHEEL(S)/CARRIER POSITION: ..LHS ..RHS ..TWIN

REAR DRAW SYSTEM: Length: ...Half ...Full

ROOF RACK: Length: ..Full ..Half Type: ..Steel ..Aluminium

TOOL BOX: Position: ............... Type: ............... Size: ................

OTHER WEIGHT CONTRIBUTING ACCESSORIES:...........................

..............................................................................................

RAW 4x4 EQUIPMENT DETAILS (All Details Must Be Completed)

FRONT REAR

Part Numbers Part Numbers

ITEMS FITTED Left Side Right Side Left Side Right Side

Shock Absorbers ........................ ........................ ...................... .....................

Springs ........................ ........................ ..................... .....................

Spring FreeCamber/Height ........................ ........................ ...................... .....................

U Bolts ........................ ........................ ...................... .....................

Greasable Shackles ........................ ........................ ...................... .....................

Trim Packers ........................ ........................ ..................... .....................

Steering Stabiliser ............................................................................................................

Fitting Kit .............................................................................................................

Brake Test Completed After Fitment? Yes / No

FRONT END ALIGNMENT DETAILS(All Details Must Be Completed)

Manufacturer’s Specification Measurements On Delivery

Left Side Right Side Left Side Right Side

Castor ............................. ............................. ............................. .............................

Camber ............................. ............................. ............................. .............................

Toe-in ............................. ............................. ............................. .............................

Front End Items Fitted:

Castor Kit - Part Number: ................................................................

CUSTOMER’S DECLARATION: I have read and accepted the conditions of Warranty on the reverse hereof. I declare that the information supplied by me is true and accurate in every detail. I will carry out normal maintenance as required, ie. regularly check U bolt tension and bush lubrication. I have read and accept “SELF FITS” section (if applicable).

SIGNED: .......................................................... DATE: ........................

Powerdown Australia Pty Ltd42 Enterprise Drive

BERESFIELD NSW 2322Tel: +61 2 4949 0000 Fax: +61 2 4949 5900

SUSPENSIONWARRANTY/REGISTRATION

Retailer: .................................... Date: ..............................

Address: ............................................................................

................................................... Post code: ......................

Salesperson: ..............................

Tel: ( ) .................................... Vehicle Details:

MAKE: ......................................................................... MODEL: ........................................................................................

BUILD DATE: ................................ REGISTRATION No: ............................... SPEEDO: ........................................ Kms/Mls

No. ................................CUSTOMER’S COPY

LICENCED RAW 4x4

FITTER No .....................

RIDE HEIGHT MEASUREMENTS / RIM TO GUARD --- THIS AREA MUST BE COMPLETED AT THE 500km CHECK ---

(Take bump stop clearances on older leaf spring vehicles)

mm____ ____mm mm____ ____mm mm____ ____mm mm____ ____mm mm____ ____mm mm____ ____mm

500km Check Carried Out By:

Raw 4x4 Retailer ..............................................................................

Address: .........................................................................................

Post Code: ...............................

Phone No: ................................

Date: ........./.........../................

Checker’s Name: ....................................... Speedo: ................ kms

Comments: ......................................................................................

.......................................................................................................

.......................................................................................................

Before Fitment

After Fitment

500kmCheck

LICENCED RAW4x4

FITTER No ....................

PO BOX 370Beresfield NSW 2322

Australia

Sales: +61 (0)2 4949 0000 Fax: +61 (0)2 4949 0099

Email: [email protected]: www.raw4x4.com.au

2011 parts catalogue - bretts truck · 2016. 4. 12. · model: f10, f20, f50, f60 specific: f...

Documents