· 2011-11-16 · noga engineering ltd. was established in 1980 by gustav hirsch and his two sons...

Noga Engineering Ltd. was established in 1980 by Gustav Hirsch and his two sonsNeft and Shuli.Gustav is the founder of the cutting tool industry of Israel.In 1941 he started Hanita Metal Works and in 1960 he established Vargus Ltd.which bears the names of Varda and Gustav.Over the last 28 years Noga has grown to become the world leader in the manufacturingof three main lines: Deburring tools ††Holding systems ††Cutting fluid applicatorsAll Noga items are designed to save you time and money and are very competitivein price.Noga's strongest points are: product design and development, quality, service and productrange. Our products are sold in more than 50 countries around the world either throughour own companies or through a network of exclusive agents.We thank you for choosing Noga.

NOGA head office

COUNTERSINKSREVERSIBLENOGAGRIP 3 HANDLEC HOLDERBLADES

deburringsystem

SIMPLY SOPHISTICATED4

NOGA BURR 3NOGA BURR 5SUPER BURREDGE OFFRAPID BURRNOGAGRIP 1 HANDLENOGAGRIP 3 HANDLES HOLDERS BLADES

HEAVY DUTY (ø3.2mm) 8-9

MAGIC BURR 2MAGIC BURR 4TELE BURRTEDDYBURRNOGAGRIP 2 HANDLENOGAGRIP 3 HANDLEN HOLDERN BLADES

LIGHT DUTY (ø2.6mm) 10-11

TRIANGULAR SCRAPERMINI SCRAPERINTERNAL SCRAPERADJUSTABLE SCRAPERNOGAGRIP 3 HANDLESC HANDLET HOLDERD HOLDERBLADES

SCRAPERS 16-17

COUNTERSINKS 12-13

10.4 ROTODRIVEEXTERNAL ROTODRIVEHEAVY DUTY INT. ROTODRIVEHEAVY DUTY EXT. ROTODRIVENOGAGRIP 1 HANDLENOGAGRIP 3 HANDLEROTODRIVE HOLDERSBLADES

ROTODRIVECOUNTERSINKS

14-15

Parting Line Flash

HolesPipe Cross HolesExternal Shaft

Surface Scraping

Pipe Cross Holes

Straight Edge

Bushing Scraping

Cross HolesHoles Deep Holes

Curved Edge Shallow StepsStraight Edge

NEW PRODUCTS 6-7 THE NEW YT RANGE

SIMPLY SOPHISTICATED 5

CONTENTS

BLADESHANDLESHOLDERS

SPECIALITY TOOLSAND BLADES

28-31

24-25

SETS AND KITS 22-23

CONVEXED CERA-CUTCONCAVED CERA-CUTCONVEXED DISPOSABLE CERA-CUTCERAMIC DOUBLE BURRCERA-CUT HANDLEBLADES

CERAMICS 20-21

NOGA O-RINGNOGA V CUTKEYWAY BURRDOUBLE BURRNOGAGRIP 1 HANDLENOGAGRIP 3 HANDLEK HOLDERL HOLDERBLADES

DOUBLE EDGECUTTING

18-19

External

Straight EdgeInternal Slot Corner

26-27

PROMO SETSECONOMY SETSCOBALT SETSTELE SETS

PLATINUM BOXGOLD BOXSILVER UNIKITBRONZE UNIKITNOGA 007PLASTIC EDGE OFFNOGA TRIONOGA MINI SET

Internal Corner

O-Ring GrooveKey Seat Key Way

Small RidgesThin Sheet Metal

deburringsystem


Adjustable Scraper YT1200

Adjustable Mini Scraper YT1100

HANDLE

YT Handle YT1000The perfect grip on:Noga adjustable scrapersNeedle filesPinsDrills• Quick change• Fits every hand• Flexible colletRange: 2.2-4.5mm.

The best mini scraper for tool and die makers.Includes:YT handle (YT1000) andD75 H.S.S triangular mini scraper (BD7501).Size: 75x3.2mm.

Ideal for scraping, trimming and deburring almost all materials.Includes:YT handle (YT1000) andT80 double ended triangularmedium scraper (BT8001).Size: 80x4.5mm.

Shape


NEW PRODUCTS

DIAMOND NEEDLE FILESSETS

The files are of Swiss made blankselectroplated with ultra highconcentration of precisely gradeddiamond particles. A must for any tooland die shop, extruders, and repairs ofhardened alloys and ceramic.Total length - 140 mm.Coated length - 70 mm.Shank - ø 3 mm.Grit size: D126YT 3000 - Includes 5 files as shownbelow, D75 HSS Triangular Scraper,T80 double ended triangular Scrapersand YT1000 handle.YT 3300 - Includes 5 files andYT1000 handle.

YT3000 YT3300

Order No.

DT1050

DT1051

DT1052

DT1053

DT1054

BT8001

BD7501

Equaling

Triangular

Square

Half round

Round

Triangular

Triangular

T80 BladeDouble ended triangular scraper.

D75 BladeH.S.S. triangular mini scraper.

3.2x75

2.5

3.9

5.4x1.9

5.1x1.4

3.0

4.5x80

Width / Thickness(mm)

Width/Length(mm)


HANDLES HOLDER

NG-3 Handle NG3000NogaGrip-3 holds all blade holders.Spare blades are kept inside thehandle. Designed for maximumcomfort in your hand.

S Holder EL02003Holds S blades (3.2mm).S holder telescopes from 30-115mm.Length: 131mm.

NG-1 Handle NG1000NogaGrip-1 holds all S blades(3.2mm). Spare blades are keptinside the handle. Designed formaximum comfort in your hand.

SUPER BURR NG3003For heavy duty jobs.Includes: NG-3 handle, S holder, S100,S20 and S30 blades.

NOGA BURR 3 NG1003Will do almost all of your deburring jobs.Includes: NG-1 handle, S10, S20 andS35 blades.

NOGA BURR 5 NG1005Same as NG1003 but with 2 extra blades.Suitable for coarse to extra fine deburringoperations.Includes: NG-1 handle, S10, S20, S35,S101 and S202 blades.

deburringsystem


BLADES Order No.

RAPID BURR RB1000Steel housing for long life of handle.Blade is replaceable.Holds 3.2mm blades.Includes: 12mm hexagonal aluminumpainted handle and S 10 blade.

Pkg. weight(grams)

Packagequantity Works best on

Straight Edge Curved Edge

EDGE OFF EO1000Disposable tool. A handy pocket clip isa standard feature of this tool.Includes: S10 blade mounted in an 8mmpainted hexagonal aluminum handle.

S10

S10Tin

S20

S20 Tin

S30

S35

S60

S100 Cobalt

S101

S150

S202

BS1010

BS1012

BS2010

BS2012

BS3010

BS3510

BS6001

BS1018

BK1010

BK3010

BK2010

40

40

60

60

40

55

40

45

40

45

55

31

31

33

33

31

33

9

32

29

27

28

10

10

10

10

10

10

1

10

10

10

10

steel, aluminum and plastic

abrasive material

brass and cast iron

stainless steel

both int. and ext. burrs

straight edges on most materials

cross holes in difficult to reach places

plastic and hard materials

fine edges on all materials

holes as small as 1.5mm Dia.

brass and cast iron fine edges

HEAVY DUTY ø3.2mm

Incl. angle(degrees)

All blades below are made of H.S.S.. Hardness 62-64Rc except S100 Cobalt 65-67Rc

L/R

L/R

L/R

L/R - for left and right hand users.

Cross HolesHoles Deep Holes

L/R

deburringsystem

MAGIC BURR 2 NG2002Will do almost all of your deburring jobs.Includes: NG-2 handle, N1 and N2blades.

MAGIC BURR 4 NG2004Same as NG2002 with two extra bladesfor cross holes in difficult to reach placesIncludes: NG-2 handle, N1, N2, N3 andN6 blades.


HANDLES HOLDER

NG-3 Handle NG3000NogaGrip-3 holds all blade holders.Spare blades are kept inside thehandle. Designed for maximumcomfort in your hand.

NG-2 Handle NG2000NogaGrip-2 holds N blades (2.6mm).Spare blades are kept inside thehandle. Designed for maximumcomfort in your hand.

TELE BURR NG3002Holds 2.6mm N blades.Highly popular tool.Includes: NG-3 handle, N holder,N1 and N2 blades.

N Holder EL01033Holds 2.6mm blades.N holder telescopes from 25-115mm.Length: 131mm.

LIGHT DUTY ø2.6mm

TEDDYBURR TB1000


N1

N1 Tin

N2

N2 Tin

N10 Cobalt

N3

N6

BLADES

BN1010

BN1012

BN2010

BN2012

BN1310

BN3010

BN6001

Order No.

Design for hard to reach locations.Blade is replaceable.Steel housing for long life of handle.Includes: 8mm painted hexagonal aluminum handle and N1blade.

Works best on

40

40

80

80

45

50

40

13

13

14

14

13

13

6

10

10

10

10

10

10

1

steel, aluminum and plastic

abrasive material

brass and cast iron

stainless steel

plastic and hard materials

both int. and ext. burrs

cross holes in difficult to reach places

All blades below are made of H.S.S.. Hardness 62-64Rc except N10 Cobalt 65-67Rc

Pkg. weight(grams)

Packagequantity


Straight Edge Curved Edge

L/R - for left and right hand users.

L/R

L/R

Holes Deep HolesCross Holes

deburringsystem

COUNTERSINK NG3100The standard tool for countersinking.Useful for chamfering deep holes.Includes: NG-3 handle, C holder andC20 countersink (20mm).


HANDLE HOLDER

C Holder CH3000Holds C12, C20 and C30countersinks. M7 external thread.Has an hexagonal cross section toprevent rotating inside handle.Length: 131mm.

NG-3 Handle NG3000NogaGrip-3 holds all blade holders.Designed for maximum comfort inyour hand.


BLADES Order No.

BC1211 90 25

All blades below are made of H.S.S.. Hardness 62-64Rc.

1-12

Range (mm)

BR3001 90 810-22

BR2001 90 75-10

BR1001 90 53-5.5

BC3011 90 583-30

BC2011 90 283-20

Package quantity

C12

R3

R2

R1

C30

C20

Weight (grams)

1

1

1

1

1

1

angle (degrees)Countersinking

Holes

COUNTERSINKS

Pipe Cross Holes

MINI REVERSIBLE RC1000Very fine tool for deburring both back and front sides of holes.Range: 3-5.5mm.Includes: steel handle and R1 blade.

MEDIUM REVERSIBLE RC2000Range: 5-10mm.Includes: steel handle and R2 blade.

LARGE REVERSIBLE RC2200Range: 10-22mm.Includes: steel handle and R3 blade.

PATENTED

TO REPLACE THE BLADEPull the aluminum knob out of the handle. At its end there is an hexagonal key. Use this key toreplace the blade.

deburringsystem

H.D. EXT. ROTODRIVENG3500Chamfers the O.D. on bars and tubes.Range: 8-28mm.Includes: NG-3 handle, H.D. externalRotoDrive holder, and EX28 countersink.


HANDLES HOLDERS

H.D. RotoDrive HolderEL0802

H.D. ROTODRIVE NG340040mm displacement allows for heavyduty burrs to be removed. Continuousrotation of countersink enables very fastchamfering.Includes: NG-3 handle, H.D. crankedRotoDrive holder and C20 countersink.


NG-1 Handle NG1000NogaGrip-1 holds all S blades(3.2mm). Designed for maximumcomfort in your hand.

H.D. Ext. RotoDriveHolder EL0902

Heavy duty cranckedholder. External M7 threadto hold C12, C20 and C30countersinks.h 40mm.

Heavy duty cranckedholder. Accepts EX28external countersink.h 40mm.

h

h

PATENTED

PATENTED


BLADES Order No. Weight (grams)

Holes

COUNTERSINKS

angle (degrees)Range (mm)

90 40EX28 EX3001

EXT. ROTODRIVE NG1700Chamfers the O.D. on bars and tubes.Quickest way to chamfer O.D. onalmost all materials.Range: 4-18mm.Includes: NG-1 handle andexternal RotoDriveEX18 countersink.

ROTODRIVE NG1200The quickest way to chamfer by hand.Single flute countersink provides asmoother cut.Includes: NG-1 handle and RD10.4RotoDrive countersink.

External Shaft

All blades below are made of H.S.S.. Hardness 62-64Rc.

EX2001 90 16EX18

90 58C30 BC3011

Package quantity

90 28C20 BC2011

90 25C12 BC1211

90 34BC1651

90 15BC1041

90 12BC8301

90 10BC6301

90 6BC3201

8-28

4-18

3-30

3-20

1-12

1-16.5

1-10.4

1-8.3

1-6.3

0-3

1

1

1

1

1

1

1

1

1

1

RD16.5

RD10.4

RD8.3

RD6.3

RD3.2

PATENTED

PATENTED

Countersinking

3.2mm RotoDrive

MINI SCRAPER NG3700Ideal for tool and die makers.Includes: NG-3 handle, D holder,triangular mini scraper D50 blade andhex key.


HANDLES HOLDERS

T Holder EL06023T holder is designed to hold T50 andT70 new scrapers.Has M5 internal thread.Length: 113mm

TRIANGULAR SCRAPERNG3600Used for standard scraping.Includes: NG-3 handle,T holder and triangularscraper T70.

SC Handle SC130012mm anodized handle. Knurledlocking collar to control bladeextension.Holds: D50, D66, D75, D77 and T80scrapers.Length: 120mm.Hex. 12mm.


D Holder EL05003D holder is designed to hold D50and D66 blades. A 3mm setscrewis holding the blade.Hex key included.Length: 131mm.

deburringsystem


BLADES Order No.Weight(grams)

SCRAPERS

Included angle(degrees)

All blades below have hardness 62-64Rc, except D55 Carbide 1400-1700 HV, and T80 CR115 58-60Rc.

Packagequantity

ADJUSTABLE SCRAPERSC8000Ideal for scraping, trimming and deburringalmost all materials.Includes: 12mm anodized handle and T80double ended triangular scraper.

Bushing Scraping Straight Edge HolesPipe Cross Holes

Width/Length(mm)

INTERNAL SCRAPER NG3710Ideal for cross-holes deburring.Includes: NG-3 handle, D holder and Internal scraperD66 blade.

D50

D55 Carbide

D66

D75

D77

T50

T70

T80

27

9

34

8

9

8

11

11

60

60

50

60

50

60

60

60

BD5010

BD5501

BD6610

BD7501

BD7701

BT5000

BT7000

BT8001

10

1

10

1

1

1

1

1

3.2 x 50

3.2 x 50

3.2 x 48

3.2 x 75

3.2 x 73

I.D3.5 x 51

I.D4.2 x 57

4.5 X 80

NOGA O-RING BURRNG1100Removes burrs from internal O-ringgrooves.Range: 0-3mm (groove width).Includes: NG-1 handle andO-ring blade.


HANDLES HOLDERS

K Holder EL04003Holds K blades with M3 screw.Length: 135mm.

NOGA V CUT NG3200For deburring sheet metal 1-8mm.Includes: NG-3 handle, L holder andL3 blade.


L Holder EL07013Holds L blades. Blades are held ina 3mm square hole and tightenedwith 4mm setscrew.Length: 131mm.

NG-1 Handle NG1000NogaGrip-1 holds all S blades(3.2mm). Designed for maximumcomfort in your hand .

deburringsystem

PATENTED


DOUBLE EDGE CUTTING

All blades are made of H.S.S.. Hardness 62-64Rc except N80M42 and N80KM42, 65-67Rc.

BLADES Order No.Included angle

(degrees)Range(mm)

35

33

5

30

29

9

6

6

9

8

55

55

55

55

55

55

50

50

40

90

10

10

1

10

10

1

1

1

1

1

0-12

0-12

1.2-8

2.4-11

2.4-11

3-15

1-8

0-2.5

1-3

Max. 3

Package weight(grams)

Packagequantity

N80

N80M42

N70K

N80K

N80KM42

N90K

L3

L4

O-Ring

TC

BN8010

BN8043

BN7001

BN8110

BN8143

BN9009

BL3001

BL4001

BO1001

BC1001

KEYWAY-BURR NG3300Effectively removes burrs from internaland external keyways.Range: 2.4-11mm.Includes: NG-3 handle, K holderand N80K blade.

Internal Thread Small Ridges“O” Ring Groove Thin Sheet MetalKey WayKey Seat

DOUBLE BURR DB1000Simultaneously removes burrs from bothsides of sheet metal.DB handle with safety guard toprotect your hand.Unique round cutting bladescan be rotated and reversedfor long life. For corners,use one blade only.Range: 0-12mm.Includes: DB handle,hand guard andtwo N80 blades.

deburringsystem


HANDLE

CERA-CUT HandleCR2100A unique plastic handle that holdsthe blade by its self gripping taper.Storage space for spare blades.Length: 135mm.

CONVEXED CERA-CUTCR2000Ideal for all plastic materials andsoft metals. Ideal for surfacescraping and parting line deflashing.Blade can be replaced.Includes: Cera-Cut handle and250mm convexed radius blade.

CONCAVED CERA-CUTCR2300Ideal for all plastic materials and softmetals. Ideal for curved edges andsmall ridges. Blade can be replaced.Includes: Cera-Cut handle and15mm concaved radius blade.

To Remove blade1. Remove the cap from the rear of

the tool.2. Insert the cap in the round hole

and turn 90°.3. Pull the blade out.

To insert blade1. Insert the blade into the groove.2. To secure the blade in place, hold

the blade and lightly tap thehandle against a solid surface.


BLADES Order No.Weight(grams)

Packagequantity Applications

Straight Edge

CERAMICS


Convexed CR2200 90 9 1 Ideal for surface cleaningand parting line deflashing

Concaved CR2500 90 9 1 Ideal for curved edges andsmall ridges

V Shaped CR5100 90 90 1 Removes burrs from bothsides simultaneously

CERAMIC DOUBLE BURRDB5000Ideal for deburring both sides of aworkpiece simultaneously.Blade can be replaced.Range: 1-11 mm.Includes: V-shaped ceramic blademounted in ergonomically designedDB handle with safety guard to protectyour hand.

Surface ScrapingParting Line FlashThin Sheet Metal

Material

Ceramic1250HV

Ceramic1250HV

Ceramic1250HV

CERA-CUT CR1100Ideal for deburring plastics and othersoft materials. Extremely long life.Disposable tool.Includes: 250mm convexed radiusceramic blade, mounted inergonomically held handle withsoft grip.

deburringsystem

PROMO SETSDeburrs: Steel ,aluminum andplastic.

S PROMO SET NG8150Includes:NogaGrip 1 handle10pcs. S10 blades.

N PROMO SET NG8000Includes:NogaGrip 2 handle10pcs. N1 blades.

Best seller


ECONOMY SETSDeburrs: Steel ,aluminum andplastic.

S ECONOMY SETNG8200Includes:NogaGrip 1 handle20pcs. S10 blades.

N ECONOMY SETNG8050Includes:NogaGrip 2 handle20pcs. N1 blades.

Free handle

NG8200

NG8150

Pack dimensions: 169 x 117 x 26mm

B10 SETDeburrs: Steel, aluminum andPlastic

B10 SET SG6000Includes:NogaGrip 2 handle20pcs. B10 Blades.

Free handle

SG6000


COBALT SETSDeburrs: Plastic and hardmaterials

S COBALT SET NG8250Includes:NogaGrip 1 handle20pcs. S100 cobalt blades.

N COBALT SET NG8100Includes:NogaGrip 2 handle20pcs. N10 cobalt blades.

Free handle

SETS AND KITS

NG8350

NG8250


GOLDEN SETSDeburrs: Abrasive materials forlong life

S10TiN NG8152Includes: NogaGrip 1 handle,10 Pcs., S10 TiN Blades

S20TiN NG8162Includes: NogaGrip 1 handle,10 Pcs., S20 TiN Blades

Free handle

NG8152

TELE SETSDeburrs: Steel ,aluminum, plastic,brass and cast iron

S TELE SET NG8350Includes:NogaGrip 3 handleS holder5pcs. S10 blades5pcs. S20 blades.

N TELE SET NG8300Includes:NogaGrip 3 handleN holder5pcs. N1 blades5pcs. N2 blades.

Free handle

deburringsystem


PLATINUM BOX NG9500Collected to meet the total requirements of tooland die makers and for deburring specialists

Includes:Double BurrNogaGrip 1 handleNogaGrip 3 handleTeddy Burr handleS holderN holderK holder + N80KD holder + D50D holder + D66C holder + C20T holder + T7018mm external RotoDrive blade10.4mm countersink RotoDrive.Blades: N1, N2, S10, S20, S30 and S150.Hex key (1.5mm).


GOLD BOX NG9400The most complete box for professional machinists

Includes:NogaGrip 3 handleAdjustable scraperPlastic Edge Off handle.S holderN holderC holder+C20D holder+D50K holder+N80KBlades: N1, N2, S10, S20, S30, S150, D66 and 10.4Countersink RotoDrive.Hex key (1.5mm).



SETS AND KITS

SILVER UNIKIT NG9300Most suitable for MRO

Includes:NogaGrip 3 handleS holderMedium reversible countersinkPlastic Edge Off handle3.2mm RotoDrive countersink10.4mm RotoDrive countersink16.5mm RotoDrive countersink18mm External RotoDriveBlades: S10, S20 and S30.


BRONZE UNIKIT NG9200Most economical deburring kit for all machinists

Includes:NogaGrip 3 handleN holderS holderC holder + C20D holder + D50Blades: N1, N2, S10, S20, S30 and S150


deburringsystem


NOGA 007 SP1007Deburring, cleaning, finishing and countersinking

Includes:RB handleO-Ring bladeRD16.5 RotoDrive countersinkRDE18 External RotoDrive countersinkThread cleaner bladeS100 bladeS150 blade


PLASTIC EDGE OFF SET EO2100The most economical set

Includes:EO handle + S10 blade, green sleeve (for aluminum)EO handle + S20 blade, red sleeve (for brass & cast iron)EO handle + S100 blade, blue sleeve (for steel)EO handle + S150 blade, yellow sleeve (for plastic)



SETS AND KITS

NOGA TRIO RB3000Standard set

Includes:RB handle + S20 blade, red sleeve (brass & cast iron)RB handle + S100 blade, blue sleeve (steel & aluminium)RB handle + S150 extra fine blade, yellow sleeve (plastic)


NOGA MINI SET NG9100Universal set

Includes:NogaGrip 3 handle.N holder - holds all N blades.S holder - holds all S blades.Blades: N1, N2, S10, S20, S30 and S150


deburringsystem

SOFT GRIP SG1000Ergonomically heldhandle. Two holes acceptsboth S and N blades.Includes: SG handle, S100and N10 cobalt blades.


ø 3.2 mm

ø 2.6 mm

LIZA BURR LB1000Double end blade holderto utilize both N and Sblades. Telescopes from20-110mm with N blades.20-94mm with S blades.Includes: Uni-handle, SNholder, N1 and N2 blades.

SCRAPER SC1000Double end scraper forlonger tool life. Can belocked in required position.Includes: Uni-handle anddouble ended T120triangular scraper.

LEADER NG3800Chamfering straight orcurved edges. Ensures45° chamfering.Includes: NG-3 handle,LD holder and L1 blade.

SPECIALTY TOOLS


Shallow Steps Cross HolesStraight EdgeCurved EdgeHoles Deep Holes

NOGA MINI CUTNG3220Used for deburring smallridges in difficult to reachplaces.Range: 0-2.5mm.Includes: NG-3 handle.L holder and L4 blade.

NOGA CORNERCLEANER NG3230Effective corner relief.Wide range ofapplications.Includes: NG-3 handle.L holder and L6 blade.

THREAD CLEANERNG1600For cleaning damagedinternal threads. MinimumDia. 9mm. Maximumthread pitch 3mm.Includes: NG-1 handle andTC blade.

NOGA SLOTCLEANER NG3210Used to relieve corners ofnarrow slots from 3.5mm.Includes: NG-3 handle,L holder and L5 blade.(L7 double end blade forcutting in two directions isalso available)

deburringsystem


PLASTIC RAPIDBURR RB1400Holds all S blades(3.2mm). The blade isreplaceable.Includes: plastic handleand S100 blade.

PLASTIC EDGE OFFEO2000Most competitive tool.Holds all S blades(3.2mm). The blade isreplaceable.Includes: plastic handleand S10 blade.

PLASTIC REAMERSP8100Deburr both inside andoutside edges of tube.Made of plastic body.Have 3 cutters.Reamer for aluminum,brass and copper tubing.Range: 4-42mm.


SPECIALTY BLADESOrder No.

BN1029

BN1028

BN2031

BN1026

BN1027

BS1016

BS1014

BS1011

BS1013

BS1019

BS2015

BK1011

BK1012

BK3103

BS3003

BS6003

BS8001

BS8003

BS7001

N1 Carbide

N1 Diamond

N2 Carbide

N1 LH

N1 LH TiN

S10 Carbide

S10 Diamond

S10 LH

S10 LH TiN

S100 TiN

S20 Carbide

S101 LH

S101 TiN

S150 TiN

S30 TiN

S60 TiN

S80

S80 TiN

S70

L1

L5

L6

L7

T120

BL1001

BL5001

BL6001

BL7001

BT1200

Blades Works best on

hardened steel & special plastics

glass & ceramics

hardened steel & hard plastics

steel, aluminum & plastic

steel, aluminum & plastic. For long life.

hardened steel & plastic

glass & ceramics

steel, aluminum & plastic

steel, aluminum & plastic. For long life.

stainless steel & plastic. For long life.

hardened materials & plastic

H.D. shank for steel, aluminum & plastic

H.D. shank for steel, aluminum & plastic. For long life.

holes as small as 1.5mm Dia. For long life.

both int. & ext. burrs. For long life.

cross holes in difficult to reach places. For long life.

shallow steps

shallow steps. For long life.

straight edges

steel and aluminum

slots from 3.5mm

sharp corners

slots from 3.5mm. Double end.

LH - for left hand users only. L/R - for left and right hand users.

LH

LH

LH

LH

LH

L/R

L/R

H.D. scraping. Double end.

C M Y CM MY CY CMY K

CA56E0906 DESIGN: ARI RO

N. PHOTO

GRAPHY: R. LEVINSO

N. PRINTED IN ISRAEL

H e a d o f f i c e

ISRAELNOGA Engineering Ltd.

Tel: 972-4-9808080Fax: [email protected]

S a l e s o f f i c e s

ISRAELNOGA Tools

Tel: 972-9-835-3243Fax: [email protected]

HOLLANDNOGA Tools B.V


JAPANNOGA Japan Ltd.


U.S.ANTC

[email protected]

C A T A L O G


All NOGA products meet the strict requirements of ISO9001 and ISO14001.

We invite you to visit our web site: www.noga.com for more information.

© Copyright 2005 by NOGA Engineering Ltd.

All rights reserved. No part of this publication may be reproduced, transcribed, stored in an electronic retrievalsystem, translated into any language or computer language, or be transmitted in any form whatsoever without the

prior written consent of the publisher.


CONTENTS

Preface 4

The right choice of a holder 5

Articulated holders FAT 6 -†7(Fine Adjustment Top)

Articulated holders FAB 8 -†9(Fine Adjustment Base)

PH holders FAT 10 - 11

PH holders FAB 12 - 13

Specialty holders 14 - 15

Sets and indicators 16 - 17

Bases 18 - 19

Modular holders 20 - 21

Comparator standsand concentromat 22 - 23

page



holdingsystem

is proud to present its new line of holding systems.

These state of the art mechanical holders, are divided into two groups, ARTICULATED and PH, bothdesigned to hold dial and test indicators, as well as many other components.

holders are also used in many other fields such as: machine construction, medical instruments,photography, light, sound and more.

holders consist of three main parts:Arms, base and top (See diagram on right).

ARTICULATED HOLDERS - articulated arms, with central locking mechanism.

PH HOLDERS - post and arm, with unique 3 points clamp.

Each group of holders consists of four sizes of arms, so you can always find one to suit your needs.

holders have fine adjustment mechanism, whether it is on the top (FAT), or at the base (FAB).

The plastic fine adjustment and the 2SM are now replaced by our top fine adjustment which is made ofmetal, and is the only fine adjustment to hold 6mm, 8mm, 3/8", dove tail and back lug.

SPECIALTY HOLDERS - eight unique individual items. These are well known patented items.

SETS - four sets of holders and indicators.

BASES - eight different magnetic bases from 320 N to 1300 N, a 350 N vacuum base, and five clamps.

MODULAR HOLDERS - another useful addition to this catalog is the modular holders section whichallows the user almost unlimited range of holding applications.

COMPARATOR STANDS and CONCENTROMAT - all are ground to 2 microns.



THE RIGHT CHOICE OF A HOLDER

• Choose the kind of arms needed, articulated or PH (post holder).

• When zero-setting is very important, use fine adjustment at base (FAB).In all other cases use fine adjustment on top (FAT).

• Decide what kind of base you want. Magnetic, vacuum or others.

• Depending on the type of indicator and job to be inspected, choose eitherstandard clamp or NOGA unique swivel clamp.

• Consult the relevant section in this catalog to choose the right holder.


TOP

ARMS

BASE

ARTICULATED PH


holdingsystem

NF61003 DG61003 MG61003 MA61003



NOGAarticulated holders

withfine adjustment

on top

ARTICULATED HOLDERS FAT

Due to its stability and ease of use, NOGA articulated holder hasbecome the industry most wanted.

• New fine adjustment on top with universal swivel clamp.

• Holds 6mm, 8mm, 3/8", dovetail and back lug.

• Central locking mechanism with NOGA designed spring loadedbearing.

• Five axis holder.

• Powerful on/off magnetic base.

• Instant fixation in any position.

• Fast and easy to set up gauges into required position.

• Black finished arms.


71 mmL3

D

L1

L2

BottomThread

NF61003

NF60103

DG61003

DG60103

MG61003

MG60103

MA61003

MA60103

Ext. M5

Ext. M5

Ext. M8

Ext. M8

Ext. M8

Ext. M8

Ext. M10 x 1.25

Ext. M10 x 1.25

320

–

800

–

800

–

1300

–

30

–

50

–

50

–

50

–

40

–

60

–

60

–

120

–

35

–

55

–

55

–

55

–

0.520

0.320

1.350

0.340

1.900

0.900

5.100

3.100

Order no. Bottom thread Force DimensionWeight

MagnetHolder

[Kg]D [N] W L H

56

56

110

110

133

133

326

326

Bottom arm

L1

Arm length

51

51

101

101

113

113

242

242

Top arm

L2

178

178

282

282

317

317

637

637

Total

L1 + L2 + L3

All measurements are in mm unless otherwise mentioned.

L

W

H

FA1510 see page 18

M6

75

Universal Swivel Clamp

ø4

ø63/8" ø8

Dovetail 1/4"

FA1500


holdingsystem

MG10503

DG10503

NF10403



NOGAarticulated holders

withfine adjustment

at base

ARTICULATED HOLDERS FAB

NOGA has developed a unique fine adjustment mechanism which isplaced on the magnetic base. This mechanism allows the hand to reston the base rather than on the clamp of the indicator. Zero-settingbecomes faster than with any other mechanism.

• Unique single direction fine adjustment at base.


• Holds 8mm or 3/8" and dovetail.

• Central locking mechanism with NOGA designed spring loadedbearing.

• Five axis holder.

• Instant fixation in any position.

• Easy to set up gauges into required position.

• Black finished arms.


BottomThread

NF10403

NF10433

DG10503

DG10533

MG10503

MG10533

320

320

800

800

800

800

30

30

50

50

50

50

40

40

60

60

60

60

35

35

55

55

55

55

FA1100

FA1120

FA1100

FA1120

FA1100

FA1120

Order no. Force DimensionOrder no.

MagnetHolder

[N] W L H

Arm length

51

51

101

101

113

113

Top arm

L2

128.5

128.5

232.5

232.5

267.5

267.5

Total

L1 + L2 + L3


56

56

110

110

133

133

Bottom arm

L1

0.520

0.520

1.400

1.400

1.900

1.900

Weight

[Kg]

Standard clamp

8

3/8”

8

3/8”

8

3/8”

Standardclamp

D

M6Dovetail 1/4"

D

Standard clamp

W L

H

L1

L2 21.5mmL3


holdingsystem

PH6800

PH6600 PH6400



NOGAeconomical holders

with fine adjustmenton top

PH HOLDERS FAT

PH6400

PH6410

PH6600

PH6610

PH6800

PH6810

M8

M8

M8

M8

M10 x 1.25

M10 x 1.25

800

–

1000

–

1300

–

50

–

50

–

50

–

60

–

75

–

120

–

55

–

55

–

55

–

1.700

0.700

2.300

1.070

3.450

1.450

Order no. Bottom thread Force DimensionWeight

MagnetHolder

[Kg]D3 [N] W L H

NOGA PH (Post Holder) holders are the latest improvement of thetraditional indicator holder.

• New fine adjustment on the top with universal swivel clamp.

• Holds 6mm, 8mm, 3/8”, dovetail and back lug.


• Strong arm lock by using 3 points clamp.


• Nickel plated arms.



ø14 x 203

ø14 x 203

ø16 x 260

ø16 x 260

ø18 x 350

ø18 x 350

ø12 x 175

ø12 x 175

ø16 x 175

ø16 x 175

ø16 x 210

ø16 x 210

Post

Dia. (D1) xlength (L1)

Arm length and diameter


Arm

3 points clamp

PH0310

PH0310

PH0312

PH0312

PH0313

PH0313

Order no.

L

W

H

L3

D1

D3

L2

D2

L1

3 points clamp

see page 18

71mm


holdingsystem

PH3100 PH2040 PH4016



BottomThread

NOGAeconomical holders

with fine adjustmentat base

PH HOLDERS FAB

PH3100

PH2040

PH4016

30

50

50

40

60

70

35

55

55

0.500

1.700

2.450

Order no. DimensionWeight

Magnet

[Kg] W L H

PH holders with NOGA unique fine adjustment at base.

• Single direction fine adjustment at base.


• Universal swivel clamp for all dial and test indicators.

• Holds 6mm, 8mm, 3/8", dovetail and back lug.

• Strong arm lock by using 3 points clamp.


• Nickel plated arms.



ø 10 x 120

ø 14 x 203

ø 16 x 260

ø 8 x 110

ø 12 x 185

ø 16 x 225

Post


Arm length and diameter


Arm

Holder

320

800

1000

Force

[N]

3 pointsclamp

Order no.

PH0315

PH0310

PH0312

Order no.

FA1210

FA1410

FA1410

Universalswivel clamp

3 points clamp

Universal swivel clamp

W

H

L

D1

L1

L2

D2

ø4 or ø6

ø63/8" ø8

Dovetail 1/4"


holdingsystem

NF1015 / NF1018

NF1022

MG71003

NF1021 / NF1024NF1030 / NF1033



NF1021 8mm

NF1024 3/8”

• On/off switchable magnet.• Magnet dimensions - W30 x L40 x H35.• Magnet force - 320N.• Weight: 0.575 Kg.

• Permanent magnet.• Magnet dimensions - W16 x L60 x H32.• Magnet force - 280N.• Weight: 0.545 Kg.

• 5 axis holder.• Patented 360° fine adjustment at base.• Holds indicator with stem and dovetail.• Central locking mechanism with NOGA designed spring loaded

bearing.• Bottom arm - 56mm.• Top arm - 51mm.• Black finished arms.

• Used for centering of workpieces.• Holds indicator with stem or dovetail.• Central locking mechanism with spring loaded bearing.• Bottom arm - 56mm.• Top arm - 51mm.• Centering rod ø 8mm x 40 mm.• Black finished arms.• Weight: 0.345 Kg.

• Universal fine adjustment, holds: 6mm, 8mm, 3/8”,dovetail and back lug.

• New fine adjustment on top with universal swivel clamp.• Holds 6mm, 8mm, 3/8", dovetail and back lug.• Central locking mechanism with NOGA designed spring loaded

bearing.• 5 axis holder.• Powerful on/off magnetic base.• Instant fixation in any position.• Fast and easy to set up gauges into required position.• Black finished arms.• Bottom arm - 163.5 mm.• Top arm - 113 mm.• Bottom thread - Ext. M8.• Magnet force - 800N.• Magnet dimensions - W50 x L60 x H55.• Weight: 1.950 Kg.

SPECIALTY HOLDERSIn respond to market demand NOGA offers 8 holders with special features.

NF1015 8mm

NF1018 3/8”

MG71003 universal


360° fine adjustment

Order no. Clamp

NF1030 8mm

NF1033 3/8”

NF1022 universal


holdingsystem

MG6150 Heavy duty holder set

Includes:MG61003DG1000

DG6150 Standard holder set

Includes:DG61003DG1000


NF1036 Centering set

Includes:NF1022NF1000 Indicator

NF6150 Mini holder set

Includes:NF61003NF1000 Indicator


SETS&INDICATORS

NOGA offers four sets combining the most popular holders with theworld’s best made indicators.


NF6150

NF1036

DG6150

MG6150

Ext. M5

–

Ext. M8

Ext. M8

30

–

50

50

40

–

60

60

35

–

55

55

0.600

0.360

1.600

2.100

56

56

110

133

51

51

101

113

178

178

282

317

Order no. Bottom thread DimensionWeight

MagnetHolder

[Kg]D W L H

Bottom arm

L1

Arm length

Top arm

L2

Total

L1 + L2 + L3


Order no.

Indicators

NF1000

NF1000

DG1000

DG1000

• Dial diameter 58 mm.• Stem diameter 8 mm.• Measuring range 10 mm.• Graduations 0.01 mm.

• Lever-type test indicator, dialdiameter 39 mm.

• Measuring range 0.8 mm.• Graduations 0.01 mm.• Contact point 2 mm dia., 20.9 mm

length.• Three dovetails for clamping.

15.5

20.9

37

ø8

4830

W L

H

L1

L2

L371 mm

DG1000 NF1000


holdingsystem

DG0039NF0037

NF3778

DG0036

DG3678

DG0038

DG0118


DG1003see page 19 DG0040


NOGAbases

BASES

Eight different magnets ranging from the world’ssmallest switchable on/off (320N) to a large magneticbase (1300N), a 350N vacuum base and 5 clampsare offered for our customers’ choice.


354030On/off magnetwith fine adj.

Type HLW

NF3778

Order no.


On/off magnet 354030NF0037

556050DG0036 On/off magnet

DG3678 55On/off magnetwith fine adj. 6050

On/off magnet 557550DG0038

On/off magnetwith fine adj. 557550DG0118

On/off magnet 5512050DG0039

557550DG1003 On/off magnet multi thread

DG0040 Vacuum base ø 92

MA0322 –4” clamp 100

MA0320 4” clamp 100

MG1006 3” clamp 75

MG1003 3” clamp 75

MG0125 3” clampwith plastic cover 75

–

–

–

–

–

–

–

–

–

L

W

H

L

L

– –

M5

Thread

M5

M8

M8

M8

M8

M10 x 1.25

M6/8/10/1210 x 1.25

M8

Ext. M10 x 1.25

Int. M10 x 1.25

Ext. M8

Int. M8

Int. M8

0.250

Weight [Kg]

0.230

1.000

1.100

1.270

1.380

2.000

1.350

0.400

1.150

1.160

0.570

0.600

0.600

320

Force [N]

320

800

800

1000

1000

1300

1000

350

–

–

–

–

–

W L

H


holdingsystem

NF60003 DG60003 MG60003 MG70003 MA60003



MODULAR HOLDERS

Five different sizes of articulated arms are offered for a wide range ofapplications.

Choose the arms that fit your needs.

A number of accessories are shown below.

Custom-made accessories are available upon request. Minimumquantity 500 pcs.


NF60003

DG60003

MG60003

MG70003

MA60003


M6

M6

M6

M6

M6

D1

M6

M6

M8

M8

M10 x 1.25

D2

56

110

133

163

326

L1

51

101

113

113

242

L2

Order no. Int. thread Arms length

D1

L1 L2

M6

75.7

UniversalSwivel Clamp

AD6013

W1/4ø40

10.5

M6

22

W1/4

34

M6

0-25(0"-1")

NF0125

M6

50.8

DG0125FA1300

M6

ø8

62

14

Dovetail 1/4"

14

50

ø10

32

30

12

40

Socket HeadScrew M6x16 W1/4

MA01252” clampPlastic fine adjustment Camera holder2SM fine adjustment

Camera nut 1” clamp3/8” x M8 adaptor

16

24.7

M8

8.5

AD8030W3/8

3/8” x M6 adaptor

22.2

16

8.5

M6

AD6031

W3/8

3/8” x M6 adaptor

24

5.1

10

M6ø10

W3/8

AD60301/4” x M6 adaptor

ø12M6

10

217

AD6010

W1/4

Int. threadD2

Int. thread

0.210

0.250

0.750

0.800

3.000

Weight

[Kg]

FA1400


SP6200*

SP6400

205

193 Flat anvilface

78 x 78

Dia. 50

ø 25

ø 25

120

100

74

74

4

2.4

holdingsystem

SP6400

NOGAcomparator

stands

• Microlapped plates 2 microns flatness to DIN876 grade 00.

• Plates are made of hardened chrome rich steel. High wear resistance.

• Base and indicator holder are made of finest casting.

• Measures microns.

• 25 mm dia. Stainless steel post.

• Accepts all electronic and standard gauges.

• Polyurethane moldings under base prevent slipping.

SP6200

Order no. Total height Weight [Kg]Platesize

ColumnMax.

measuringheight

Cross arm

Serratedanvil face

* Available with fine adjustment (SP6300), available with ceramic plate and fine adjustment (SP6100).

NOGA high quality comparator stand holds indicators and probes for thickness and comparator work.



Plate


COMPARATOR STANDS and CONCENTROMAT

The Concentromat is a universal gauge for checking the concentricityof round parts having diameter of 1mm to 25mm. Used for checkingexternal diameter, internal diameter and curved surface.

Includes:• Hardened and ground stainless steel plate.

• Two moving "V" blocks each with two replaceable carbide pins.

• Carbide stop, which is flat and perpendicular to the "V" blocks.

• Scrolling device.

• Retractable articulated arm for test indicator holder. (NF1000 testindicator not included).

• All parts can be easily moved and set along the base, enabling partsof different geometries to be tested.

SP6900


NOGAconcentromat

· 2011-11-16 · noga engineering ltd. was established in 1980 by gustav hirsch and his two sons...

Documents