2010 fall updates automotivebookstore catalog - …store.sae.org/catalog/auto2010fall.pdf · ·...

2010

Automotive BOOKSTORE Catalog

SP-2288 $$104.95 List

SAE 2009 World Congress April 13-15, 2010 Cobo Center Detroit MI, USA

Diesel Exhaust Emission Modeling, 2010 SP-2288

Diesel Exhaust Em

ission Modeling, 2010

SP-2288

Insert bar code here

Fall Updates

For a Complete Listing of Print and eBook Titles,

Visit books.sae.org

http://books.sae.org

The SAE Bookstore now offers selected titles in electronic format.

Choose an entire ebook or a speci� c chapter, and select the format that is compatible with your smartphone,computer, or ebook reader.

Visit books.sae.org for a complete listing of print and ebook titles.P91541

BOOKSTORE

Visit books.sae.org for a complete listing of print and ebook titles.

Order today!Online: books.sae.orgE-mail: [email protected]:1-877-606-7323 (U.S. & Canada) or 1-724-776-4970Note: prices subject to change. Actual shipping charges will be applied.

Members Save!SAE Members receive a 10%-20% DISCOUNT off List price for most products priced under$500*. Become an SAE Member and start saving today! Visit www.sae.org/join*Discount is determined by Member Level.



mailto:[email protected]

http://www.sae.org/join


1

Bodies and Structures ........................................ 2 Bodies, Chassis, Steering Systems, Suspension Systems,

Tires, Wheels.

Design and Simulation ........................................ 4 Analysis Methodologies, CAD/CAM/CAE, Design Processes,

Rapid Prototyping, Simulation and Modeling.

Electronics ........................................................... 5 Architecture, Comfort and Convenience Systems, Electrical

Systems, Electromagnetic Compatibility (EMC), Electronic Control Systems, Electronic Equipment, Embedded Software, Infotainment Systems, Intelligent Transportation Systems (ITS), Navigation and Guidance Systems, On-Board Diagnostics (OBD), Sensors and Actuators, Telecommunications.

Environment ......................................................... 9 Emissions, Environmental Protection, Environmental

Regulations and Standards, Environmental Testing, Life Cycle Analysis, Recycling, Sustainable Development, Waste Management, Water Quality.

Fuels and Energy Sources ................................ 12 Energy Conservation, Energy Consumption, Lubricants,

Off-Board Energy Sources, On-Board Energy Sources.

Management ...................................................... 13 Collaboration and Partnering, Data Management,

Emergency Management, Globalization, Liability, Logistics, Manufacturing Resource Planning, Outsourcing, People and Personalities, Product Development, Product Planning, Product Management, Project Management, Quality Assurance, Quality Control, Regulation, Resource Allocation, Risk Management, Standardization, Supplier Assessment, Supply Chain Management, Systems Management, Time Management, Total Life Cycle Management.

Manufacturing ................................................... 17 Automation, Computer Integrated Manufacturing (CIM),

Cooperative Programs, Identification, Lean Manufacturing, Machining Processes, Manufacturing Equipment and Machinery, Manufacturing Processes, Materials Handling, Metallurgy, Production, Remanufacturing.

Materials ............................................................ 18 Adhesives and Sealants, Biomaterials, Ceramics, Chemicals,

Coatings, Colorants and Finishes, Composite Materials, Corrosion, Fabrics, Fibers, Foams, Gases, Glass, Heat Resistant Materials, Insulation, Lightweight Materials, Materials Identification, Metals, Nanomaterials, Odors, Polymers, Properties, Refractory Materials, Semiconductors, Smart Materials, Textiles, Tribology, Waste Materials.

Power and Propulsion ....................................... 27 Drivetrains, Engines, Exhaust Systems, Fluid Power Systems,

Fuel Systems, Vehicle Drive Systems.

Safety ................................................................. 36 Accidents, Collision Avoidance Systems, Collision Warning

Systems, Crash Research, Crashworthiness, Event Data Recorders, Hazards, Protective Systems, Safety Regulations and Standards, Safety Testing and Procedures.

Systems and Components ................................ 39

Tests and Testing ............................................... 40 Certification, Data Acquisition, Flight Tests, Inspections, Non-

Destructive Tests (NDT), Performance Tests, Road Tests, Test Equipment and Instrumentation, Test Facilities, Test Procedures, Testing Services.

Vehicles and Performance ................................ 41 Aerodynamics, Motorsports, Noise, Vibration, Harshness,

Performance, Vehicle Dynamics, Vehicle Handling, Vehicles

Watch for These Titles ...................................... 44

Table of Contents

Bodies and Structures

2

Bus and Coach ReportThis report looks at the current state of the bus industry along with global emissions legislation and bus rapid transit systems. The report examines key areas of development in technology such as powertrain development; hybrid powertrains; electric hybrid buses; advanced battery technology; supercapacitors and ultracapacitors; flywheel based hybrid; electric motors; fuel cells and the use of hydrogen; alternative fuels; transmission development; chassis design; vehicle body developments; and information technology. Profiles of major manufacturers are also included. Published by Supplier Business Ltd.

421 pp., PDF Only 2010.

$2130.00 ListProduct Code: MR-SB-074

Brakes and Electronic Stability Control2005The 19 papers in this technical paper collection cover vehicle brake system performance, vehicle brake noise, antilock braking control of electric vehicles, enhanced traction stability control systems, and more.Visit collections.sae.org.

Online 2010

$75.00 ListProduct Code: COLL-TP-00044

Brake Technology2007The 14 papers in this technical paper collection cover brake subsystem performance and their impact on the overall vehicle brake system, electro-mechanical brakes and controls, and vehicle performance and NVH issues.Visit collections.sae.org.

Online 2010


Brake Technology 2010This technical paper collection includes 8 papers from OEMs, suppliers, and academia detailing current brake engineering issues and technology. Topics covered include: NVH, controls, modeling, testing, brake drag, and hardware-in-the-loop evaluations.Visit collections.sae.org.

8 Papers, Online 2010


NEW

NEW

NEW


http://books.sae.org/book-mr-sb-074


http://collections.sae.org/coll-tp-00001



Bodies and Structures

3

Tire and Wheel Technology and Vehicle Dynamics and Simulation2009Experimental methods and computational applications related to tire and wheel systems as well as vehicle dynamics and simulation topics are included in the 40 papers in this technical paper collection.Visit collections.sae.org.

Online 2010


Tire and Wheel Technology and Vehicle Dynamics and Handling2010The 35 papers in this technical paper collection cover vehicle dynamics, handling, and experimental studies and mathematical modeling of tires and tire systems. Design, materials, and testing apparatus topics are included.Visit collections.sae.org.

Online 2010


The Shock Absorber HandbookBy John C. DixonThis book provides comprehensive coverage of the design, installation, and use of the shock absorber. Chapters cover:•VibrationTheory•RideandHandling• Installation•FluidMechanics•ValveDesign•DamperBehavior•Adjustables•SpecifyingaDamper•Testing

ISBN: 978-0-7680-0050-4, 495 pp., 10 Chapters, Paperbound 1999.

$69.95 ListProduct Code: R-176

NEW

NEW

P101314

Delivery options for SAE Technical Papers:• Individual Technical Papers

• Special Publications

• Progress in Technology

• SAE Technical Papers Collections

• SAE Subscriptions

• SAE International Journals

• TechSelect

• Subject specifi c CDs

SAE Technical Papers current and historical technology advancements from mobility experts around the world

For detailed information on these products, visit http://www.sae.org/technical/papers/

http://books.sae.org/book-r-176

http://www.sae.org/technical/papers/



Design and Simulation

4

Virtual Design and Engineering2010The 9 papers in this technical paper collection pertain to the creation and application of various tools that will allow for the design and manufacture of parts, equipment, facilities and tests that eliminate the need for physical part prototyping early in a program. The ability to model various aspects of design, test and manufacturing allows for more accurate, cost effective and faster development and product delivery to market.Visit collections.sae.org.



Load Simulation and Analysis in Automotive Engineering2010The 29 papers in this load simulation and analysis collection of technical peprs focus on road test simulator techniques; tire and terrain modeling techniques and applications; driver modeling and vehicle ride comfort analysis; influence of load on vehicle handling dynamics and its control; mulibody dynamics systems modeling and applications; and test/simulation correlation and durability CAE application. Visit collections.sae.org.

Online 2010


CAD/CAM/CAE Technology2010The 8 papers featured in this technical paper collection advance the knowledge in product design, manufacturing processes, and engineering analysis using the state-of-the-art computer technology. The scope includes research findings in such areas as computational fluid dynamics, manufacturing and assembly simulation, crushworthliness, computational mechanics, mold flow, ride simulation, ergonomic design and analysis, NVH, and reverse engineering.Visit collections.sae.org.



NEW

NEW

NEW

P101334

SAE SubscriptionsSAE Subscriptions offer the mobility engineering community access to up-to-date, full text portfolios of focused, essential, industry knowledge.

The easy-to-use platform helps facilitate the research and discovery processes by leveraging search fi ltering. Results are displayed clearly and sharing tools make peer-to-peer collaboration quick and painless.

So whether you need a quick answer to a specifi c research question, in-depth insight into an emerging technology, or the latest knowledge on an important industry trend, SAE Subscriptions delivers fast, accurate, informative results.

For more information visit subscriptions.sae.org

http://subscriptions.sae.org




Electronics

5

Automotive Lighting Technology and Human Factors in Driver Vision and Lighting2007The 28 papers in this technical paper collection discuss automotive lighting product innovation and improvement; engineering analysis: new light sources evaluations; advanced lighting technologies: LED applications; benefits of the advanced road illumination; and visual aspects of the lighting systems and how drivers are effected by the inputs of these systems.Visit collections.sae.org.

Online 2010


Automotive Lighting Technology and Human Factors in Driver Vision and Lighting2010The 11 papers in this technical paper collection focus on energy savings and sustainability, LED light source application and its energy savings and environmental benefit and lighting products advancement for their performance.Visit collections.sae.org.

Online 2010


Automotive Electronics ReliabilityVolume 2By Ronald K. JurgenThis book includes 40 SAE technical papers, published from 2007 through 2010, that describe the latest research on automotive electronics reliability technology. This book will help engineers and researchers focus on the design strategies being used to minimize electronics reliability problems, and how to test and verify those strategies.After an overview of durability, risk assessment, and failure mechanisms, this book focuses on state-of-the-art techniques for reliability-based design, and reliability testing and verification. Topics include:•powertraincontrolmonitoring•distributedautomotiveembeddedsystems•model-baseddesign•x-by-wiresystems•batterydurability•designverification• faulttreeanalysis.

ISBN: 978-0-7680-3492-9, 377 pp., Paperbound 2010.

$99.95 ListProduct Code: PT-144

Automotive Electric and Electronics Systems ReportAutomotive electronics offer the single largest growth area for suppliers in the future. This report provides detailed coverage of the market drivers along with in-depth analysis of the latest technologies. Contents cover hardware, software, domain architecture, and outlook. Also included are 40 company profiles. Published by Supplier Business Ltd.

187 pp., PDF Only 2010.


NEW NEW

NEW


http://books.sae.org/book-pt-144



Electronics

6

Driver Assistance Systems ReportThe Driver Assistance Systems Report includes a market overview, including size, demand, human-machine interface, competition and growth within the industry. It also covers in-depth technological aspects and includes a comprehensive section on key supplier profiles along with a company index. Published by Supplier Business Ltd.

153 pp., PDF Only 2007.


The Connected Car Report - North American EditionThe Connected Car Report - North American Edition provides a detailed study of the industry including market drivers and barriers, Business Models - Selling Telematics in the showroom, Deriving Value from the Telematics Value Chain and Connected Car Deployment Timelines. Published by Supplier Business Ltd.

66 pp., PDF Only 2010.


Automotive Lighting Technology & Human Factors in Driver Vision & Lighting; Rear Vision & Indirect Vision2006This technical paper collection contains 32 papers that cover automotive lighting technologies including product innovation and improvement, engineering analysis modeling and evaluations, advanced lighting technologies LED applications, and human factors in driver vision and lighting, rear and indirect vision.Visit collections.sae.org.

Online 2010


NEW

The SAE J2746 Software Assessment Repository is a new, online web-based system that facilitates accurate and secure sharing of companies’ software development capabilities throughout the global automotive industry.

Enter your company’s assessment now at 25% off the $500 fee!

www.sae.org/servlets/j2746/ Developed by the SAE Electrical Systems Embedded Software Standards Committee

Embedded & distributed software developers:Promote your capabilities in SAE’s new assessment database.

Creating harmonized standards solutions. Moving the on- and off-road vehicle industry forward.

P101113



http://www.sae.org/servlets/j2746/


Electronics

7

In-Vehicle Software & Hardware Systems2007The 23 papers in this technical paper collection share technology in the area of data analysis and computing possibilities; advances in process, tools, and technology being applied to reduce validation time and cost, and to improve the quality of embedded control software; and developments of embedded software that resides in production vehicle electronic modules.Visit collections.sae.org.

Online 2010


In-Vehicle Networks and Software2010The 10 papers in this technical paper collection cover the latest developments and proposals for in-vehicle networks. Subjects include: new protocols, gateways, vehicle control, message handling, X-by-wire, diagnostics, off-board connectivity and vehicle-to-vehicle or vehicle-to-infrastructure communications. Also, the development of embedded software that resides in production vehicle electronic modules is covered, including requirements, implementation, algorithms, modeling, and autocode generation.Visit collections.sae.org.

Online 2010


Intelligent Vehicles & Transportation Systems2006The 16 papers in this technical paper collection cover pre-crash detection systems, increased maneuverability of electric vehicles, interactive cruise control, stereo vision based parking assist systems, performance of a rear-end crash avoidance system, and more.Visit collections.sae.org.

Online 2010


Intelligent Vehicle Initiative (IVI) Technology Advanced Controls and Navigation2010This technical paper collection contains 11 papers by leading experts in the field of intelligent vehicle technologies. Topics include vehicle navigation, collision avoidance, sensor and camera-based autonomous driving and parking, and vehicle to vehicle communications. Practical examples include the use of sensors, software, data and control logic to assist or guide the driver and/or to control the vehicle.Visit collections.sae.org.

Online 2010


NEW

NEW NEW

NEW







Electronics

8

Lighting Technology and Human Factors2005This technical paper collection contains 29 papers covering lighting technologies. Topics covered include improving lower beam visibility, LED headlamp design, mirror mounted turn signals, condensation in headlamps, headlight glare exposure and recovery, glare on driving behavior, and more.Visit collections.sae.org.

Online 2010


In-Vehicle Software & Hardware Systems2006The 39 papers in this technical paper collection cover hardware/software design and development; database functionality in engine management systems; potentials of parallel processing on CAN networks; practical advice for using test generation tools; and more.Visit collections.sae.org.

Online 2010


NEW NEW

ADDRESSING THE CHALLENGES OF TRANSPORTATION CONNECTIVITY

P101288

Leading SDO in NIST roadmap for SmartGrid interoperability

SAE J1772TM - Electric Vehicle Conductive Charge Coupler standard

SmartGrid standards harmonization activities

FHWA—IntelliDrive standards development activities

SAE J1711TM – Measuring Exhaust Emissions/Fuel Economy of HEVs standard

SAE J2836/1TM – Use Cases for Communication between Plug-In Vehicles & Utility Grid standard

SAE Convergence® 2012

NEW! Vehicle Electri� cation Portal www.EVSAE.COM

Your Outlet to Vehicle Electrifi cationStandards SmartGrid Harmonization Technical Resources

http://ev.sae.org/



Environment

9

Emissions Measurement and Testing2010The 33 papers in this technical paper collection provide the latest advances in emissions measurement and testing and in-use engine emissions measurement and testing. Visit collections.sae.org.

Online 2010


Diesel Exhaust Emission Modeling2010The 14 papers in this technical paper collection focus on modeling methodologies describing aftertreatment technologies such as DPF, NOx adsorber, SCR and combined systems. Papers are offered from fundamental, 3D level to system level simulation. Visit collections.sae.org.

Online 2010


Diesel Exhaust Emission Control2010The 57 papers in this technical paper collection describe technology developments and the integration of these technologies into new emission control systems. Topics include DPF substrates and systems, selective catalytic reduction (SCR), HC-DeNOx, and system integration and durability.Visit collections.sae.org.

Online 2010


Advanced Catalysts and Substrates2006This technical paper collection includes 12 papers detailing SULEV emission requirements, three-way-catalysts, lean NOx trap systems, and more.Visit collections.sae.org.

Online 2010


NEW NEW

NEW NEW





Environment

10

In-Cylinder Diesel Particulate and Nox Control2008The 16 papers in this technical paper collection deal with understanding and reducing the in-cylinder formation of particulate and NOx in compression ignition engines. Ttechnologies are focused on but are not limited to: low temperature combustion, water/fuel emulsions, and EGR. Both experimental and analytical contributions are included.Visit collections.sae.org.

Online 2010


Hybrid Commercial Vehicles ReportThis report looks at the different types of commercial vehicle hybrids currently available on the market. It provides detailed coverage of the market drivers along with in-depth analysis of the latest technology. It also examines flywheel based hybrids; electric hybrids; advanced battery technology; and details the latest OEM technologies and strategies by manufacturer. Published by Supplier Business Ltd.



General Emissions2010The 9 papers in this technical paper collection discuss general topics in emissions related to fuel type, after treatment design and architecture, and combustion strategy using techniques like mathematical models, CFD, and experiments.Visit collections.sae.org.



The Exhausts and After Treatment Systems ReportThis SupplierBusiness Exhaust and Aftertreatment Report looks at the current drivers and future trends in this crucial sector. The current state of the market is examined along with global emissions control regulations and an equipment overview of exhausts and after-treatment systems. The report profiles 18 of the key players in this market segment. Published by Supplier Business Ltd.

132 pp., PDF Only 2010.


NEW NEW





Environment

11

Technologies for Near-Zero-Emission Gasoline-Powered VehiclesBy Fuquan ZhaoExperts in the field address a broad spectrum of key research and development issues in the rapidly progressing area of near-zero-emission gasoline-powered vehicles. Written in response to the increasingly stringent emissions legislation, this book provides the reader with a concise introduction to technology developments in near-zero-emission gasoline-powered vehicles. A must-read for anyone interested in gasoline-powered vehicles: •Engineers•Managers•ResearchandDevelopment•Academia•Students

ISBN: 978-0-7680-1461-7, 480 pp., 14 Chapters, Hardbound 2006.


In-Cylinder Diesel Particulate and NOx Control2005This technical paper collection contains 14 papers that cover DI diesel combustion, DI diesel engine performance and pollutant emissions, NOx emission reduction, performance optimization of diesel engines, and more.Visit collections.sae.org.

Online 2010


In-Cylinder Diesel Particulate and NOx Control2006The 16 papers in this technical paper collection detail low temperature combustion and in-cylinder emission strategies.Visit collections.sae.org.

Online 2010


NEW

NEW

P100263

The 2010 SAE Emissions Technology Collection on CD-ROM gives engine designers and engineers instant access to the latest, most comprehensive emissions-related information available to the industry. This single-user set provides more than 4,000 key technical papers presented at SAE conferences from 1975 through the 2010 SAE World Congress. This product features over 180 total updates including 58 new papers from the SAE 2010 World Congress and 122 new papers from 2009.

Topics include:• Design, measurement, and testing of emissions • Particulates • Hydrocarbons • Oxides of nitrogen • Carbon monoxide • and more

$680.00 List PriceProduct Code: EMISS2010

For complete information visit: store.sae.org/webcd.htm

2010 SAE Emissions Technology Collection on CD-ROM

Online: store.sae.orgE-mail: [email protected]

Toll-free: 1-888-875-3976 (U.S. and Canada)Telephone: 724-772-4086


http://store.sae.org/webcd.htm



Fuels and Energy Sources

12

Fuel Injection and Sprays2010The 14 papers in this technical paper collection are devoted to experimental and computational work in the area of diesel fuel injection systems and sprays. Topics include: spray characterization, cavitation, multi-phase jet modeling, CFD models for spray processes, wall films and impingement, hydraulic circuit analysis, and dissolved gas effects.Visit collections.sae.org.

Online 2010


Fuel Cell Vehicle Applications2008The 14 papers in this technical paper collection address fuel cell systems; the status of fuel cell vehicle development; hydrogen fuel cell vehicle fuel economy, fleet monitoring and hydrogen fueling; and modeling of fuel cell systems.Visit collections.sae.org.

Online 2010


Advances in Alternative Energy and Fuels for the Transportation Sector2010This technical paper collection contains 30 papers that detail transmissions and drivelines. Topics covered include: simulation/modeling, components/subsystems, controls, all wheel drive/ NVH/launch devices, hybrid powertrain concepts, and transmission systems/drive units.To see a listing of papers included in this special publication, click on the papers link below.Visit collections.sae.org.

Online 2010


Advanced Fuel Cell Vehicle Applications2010The 12 papers in this technical paper collection cover advances in fuel cell vehicles from the system to component level. Visit collections.sae.org.

Online 2010


NEW

NEW

NEW

NEW







Management

13

Indian Truck ReportThis report looks at the truck industry in India. Four main sections cover: Indian Truck Market, Buyer behaviour – shifting product preferences, Challenges facing Indian suppliers and Government Policies & regulations. The report also includes detailed profiles of 35 top suppliers in this emerging sector. Published by Supplier Business Ltd.

132 pp., PDF Only 2009.


Hall-Scott: The Untold Story of a Great American Engine MakerBy Ric A. Dias, Francis H. BradfordThis book traces the history of Hall-Scott, a company best known as a maker of commercial engines that powered tens of thousands of vehicles and equipment, including trains, airplanes, boats, trucks, buses, fire trucks, pumps, generators, and other large machines.



Carriages Without Horses:J. Frank Duryea and the Birth of the American Automobile IndustryJ. Frank Duryea and the Birth of the American Automobile IndustryBy Richard P. ScharchburgCharles E. and J. Frank Duryea, two brothers from rural Illinois, were the founders of the American automobile industry. The Duryea Motor Wagon company was the first company organized in the United States for the manufacture of automobiles. Carriages Without Horses tells, for the first time, the story of the life and pioneering accomplishments of J. Frank Duryea, who did the actual work of construction on the cars, and was responsible for the practical designing and engineering of all components (aside from the steering mechanism) of the Duryea cars.


Assembly and Localization of Foreign Passenger Cars in RussiaAs companies start projects and establish plants in the Russian Federation, this report provides information about the assembly and localization of foreign cars in Russia, including details of market participants and domestic suppliers. Published by Supplier Business Ltd.







Management

14

Reliability and Robust Design in Automotive Engineering2008The 59 papers in this technical paper collection detail reliability and robust design in automotive engineering. Topics covered include: reliability-based design optimization and robustness; military applications; decision under uncertainty/uncertainty modeling; axiomatic design; reliability testing and design of experiments; methods for assessment of reliability and robustness; reliability applications in the automotive and other industries; modeling validation and verification; and reliability and robust design in automotive aero-thermal and fluid systems.Visit collections.sae.org.

Online 2010


Reliability and Robust Design in Automotive Engineering2009The 40 papers in this technical paper collection focus on reliability and robust design in automotive engineering. Topics include: assessment of reliability and robustness and reliability applications; reliability-based design optimization and robustness; decision under uncertainty/uncertainty modeling; reliability testing and design of experiments; axiomatic design; military applications; design for six sigma; reliability and robust design in automotive aero-thermal and fluid systems; and model validation and verification.Visit collections.sae.org.

Online 2010


Reliability and Robust Design in Automotive Engineering2010This technical paper collection contains 41 reliability and robust design papers. Topics covered include: axiomatic design; reliability testing, model validation and verification; reliability-based design optimization; assessment of reliability and robustness and reliability applications; design for Six Sigma; decision under uncertainty/uncertainty modeling; and reliability and robust design in automotive aero-thermal and fluid systems. Visit collections.sae.org.

Online 2010


Project Management of Complex and Embedded SystemsBy Jon M. Quigley, Kim H. PriesThere are many books on project management and many on embedded systems, but few address the project management of embedded products from concept to production. Project Management of Complex and Embedded Systems: Ensuring Product Integrity and Program Quality uses proven Project Management methods, as well as elements of IEEE embedded software development techniques, to explain how to deliver a reliable complex system to market.

ISBN: 9781420072051, 376 pp., Hardbound 2010.

$84.00 ListProduct Code: B-875

NEW

NEW

NEW

NEW

http://books.sae.org/book-b-875




Management

15

Russian Passenger Car Market ReportThis report is a thorough and comprehensive analysis of the automotive passenger car market in Russia. Contents cover production of passenger cars, foreign car assembly, selling dynamics, imports of passenger cars, and more. Published by Supplier Business Ltd.



Reliability and Robust Design in Automotive Engineering2005The 60 papers in this technical paper collection cover robust design in automotive engineering. Topics covered include: design optimization; reliability; design methodology; software FMEA; reliability testing; design stability; design for six sigma; risk assessment and more.Visit collections.sae.org.

Online 2010


Reliability and Robust Design in Automotive Engineering2006The 65 papers in this technical paper collection discuss reliability and robust design in automotive engineering. Topics covered include: design optimization, probabilistic assessment of CAE models, design for lean six sigma, simulations under uncertainty for occupant safety, optimizing vehicle occupant packaging, axiomatic design, product development process from quality and reliability perspectives, and more. Visit collections.sae.org.

Online 2010


Reliability and Robust Design in Automotive Engineering2007The 64 papers in this technical paper collection cover automotive engineering reliability and robust design topics including fatigue reliability; design of experiments (DOE); model validation and verification; decision under uncertainty and uncertainty modeling; thermal and fluid systems; reliability-based design optimization and robust design; and innovative industrial applications.Visit collections.sae.org.

Online 2010


NEW

NEW NEW





Management

16

ManagementManagement

16

Supplying RenaultThis report, provides a complete overview over all the production and platform strategic implications for current and potential suppliers, and provides the results of unique research conducted by SupplierBusiness over a range of business practices and relational issues between the French carmaker and its supply base. Published by Supplier Business Ltd.

109 pp., PDF Only 2010.


Supplying GMSupplying GM provides guidance and insight into the OEM’s strategic position on the purchasing side. Contents cover: production strategy; procurement spending and organization; levels of vertical integration; biases in supplier selection; business practices regarding pricing and quality; R&D spending and focusings; modules and systems outsourcing policy; forward model programs; and SWOT analysis of supplying the OEM. Published by Supplier Business Ltd.

139 pp., PDF Only 2010.


Supplying FordThe last few months have underlined the importance of the OEM customer base of each supplier for medium- and long-term strategic success. This SupplierBusiness Report, as a part of the Supplying OEMs series, provides guidance and insight into the OEM’s strategic position on the purchasing side. Published by Supplier Business Ltd.

120 pp., PDF Only 2010.


Supplying DaimlerThis report focuses on Daimler’s plan to optimize its cost structure. Contents cover: production strategy; purchasing strategy; supplier selection; OEM survey results for Daimler; Swot analysis of Supplying Daimler; Daimler global footprint; Daimler Forward Model Program; and major suppliers by component sector. Published by Supplier Business Ltd.

135 pp., PDF Only 2009.






Manufacturing

17

Welding & Joining & Fastening & Friction Stir Welding2006The 29 papers in this technical paper collection cover topics such as spot welding of advanced high strength steels, weldability improvement, metal inert gas welding process optimization, self-piercing riveting, stir spot welding, and more.Visit collections.sae.org.

Online 2010


Welding and Joining and Fastening2010The 12 papers in this techncial paper collection represent research in the areas of welding, riveting, joining, and fastening for automotive applications. Papers focus on the recent advances in the process optimization, analytical solution, numerical modeling, response evaluation as well as static and dynamic testing of traditional resistance spot welds, gas metal arc welds, friction stir spot welds, laser welds, rivets, mounts, adhesives, and fasteners. Visit collections.sae.org.

Online 2010


Auto Components & Spare Parts Market in RussiaThis report profiles over 150 Russian producers of automotive components and spare parts. Put together by a Russian-based research team, the report represents a unique insight into the changing face of this strategic sector. Published by Supplier Business Ltd.

126 pp., PDF Only 2009.


NEW

NEW

P91576

The SAE International Journal of Materials & Manufacturing focuses on publishing the most authoritative and in-depth technical research papers in areas related to all types of materials and manufacturing techniques for automotive and aerospace engineering technologies. Research and application areas include Ferrous and Non-Ferrous Materials, Powdered Metals, Ceramics, Plastics, Polymers, Casting, Stamping, Forming, Welding and Joining, Design for Manufacturability, Fatigue, and Life Cycle Assessment.

The journal is available in print and online formats. SAE International is partnering with HighWire Press to produce the online journals. The online format features rich linking systems that facilitate academic research, discovery, and citation.

For more information and to view table of contents, visit www.sae.org/journals.

F O U N D E D

J A N U A R Y 1 9 0 5

✽ ✽

SAE International


http://www.sae.org/journals



Materials

18

Climate Control2010Climate control is a defining vehicle attribute that has strong interaction with other vehicle systems. Also, performance and quality of the climate control system are critical to customer satisfaction. The 10 papers in this technical paper collection cover alternative A/C systems, multi-zone climate control, cabin air filtration, automatic controls, and optimized energy consumption.Visit collections.sae.org.

Online 2010


Optical Measurement Nondestructive Testing Techniques2010The 47 papers in this technical paper collection focus on CAE analysis, test correlation and optimization for crashworthiness/occupant safety CAE, durability CAE, multi-body simulation and applications; NVH CAE; automotive engineering testing and test methods; and optical measurement and nondestructive testing techniques in automotive engineering. Visit collections.sae.org.

Online 2010


Advances in Light Weight Materials- Aluminum, Casting, Materials, and Magnesium Technologies2010The 19 papers in this technical paper collection present the latest developments in automotive applications of aluminum castings and wrought products. The latest research and development of magnesium alloys and the application of materials and design of cast products for automotive applications are included.Visit collections.sae.org.

Online 2010


Advanced Battery Technology2010Batteries pose one of the biggest challenges and opportunities on the road to electrifying the automobile. The success or failure of hybrid, plug-in, and electric vehicles is highly dependent on their batteries. The 8 papers in this technical paper collection focus on modeling of cells and packs behavior, plug-in hybrid vehicle batteries, and safety standards. Visit collections.sae.org.



NEW

NEW

NEW

NEW







Materials

19

Aluminum Alloy Castings:Properties, Processes, and ApplicationsBy J. Gilbert Kaufman, Elwin L. RooyAluminum Alloy Castings provides property and performance data for all types of aluminum alloy castings and reviews and describes the factors that contribute to and affect those properties, including composition, microstructure, casting process, heat treatment, and quality assurance. The electronic publication features extensive collections of property and performance data, including previously unpublished aging response curves, growth curves, and fatigue curves, presented in consistent formats to enable easy comparisons among different alloys and tempers. Published by ASM.

ISBN: 978-1-61503-047-7, 230 pp., PDF Only 2004.

$230.00 ListProduct Code: B-ASM-002

Alloying: Understanding the BasicsBy J.R. DavisAlloying: Understanding the Basics is a comprehensive guide to the influence of alloy additions on mechanical properties, physical properties, corrosion and chemical behavior, and processing and manufacturing characteristics. Information addresses the beneficial effects of major alloy additions, as well the detrimental effects of minor elements or residual (tramp) elements included in charge materials or that result from improper melting or refining techniques. Published by ASM.

ISBN: 978-1-61503-063-7, 657 pp., PDF Only 2001.


Steel Innovations, Fatigue Research, Sheet/Hydro/Gas Forming Technology & Advanced High Strength Steel Development2007Containing this technical paper collection provides a comprehensive overview of advanced high strength steel, their utility and manufacturability, and their performance and applications in automotive structures. Also discussed are innovations in steel sheet products and processing; innovations in steel bar products and processing; fatigue research, applications, testing and analytical techniques; and sheet/hydro/gas forming technology and modeling.Visit collections.sae.org.

Online 2010


Scrap Tires: Disposal and ReuseDisposal and ReuseBy Robert H. SnyderThis publication details the historical, technological, and economic issues related to the scrap tire industry, and the manner in which the scrap tire problem is addressed. The book provides advice on how scrap tires can be used for fuels, sealants, rubber mats, and more.


NEW


http://books.sae.org/book-b-asm-001



Materials

20

Corrosion: Understanding the BasicsBy J.R. DavisCorrosion: Understanding the Basics provides engineers with a useful overview of the principles of corrosion and can be used as a general guide for developing a corrosion-control program. Information includes identification of the various forms of corrosion, critical factors leading to a specific type of corrosion, necessary preventive steps to eliminate or reduce corrosion damage, protective-coating selection, corrosion characteristics of common structural materials, corrosion-testing programs, and failure-analysis procedures. Published by ASM.

ISBN: 978-1-61503-068-2, 571 pp., PDF Only 2000.

$179.00 ListProduct Code: B-ASM-006.jpg

Characterization and Failure Analysis of PlasticsBy Steve LampmanCharacterization and Failure Analysis of Plastics provides practical and comprehensive coverage on how the performance of plastics is characterized during design, property testing, and failure analysis. Published by ASM.

ISBN: 978-1-61503-073-6, 485 pp., PDF Only 2003.


Aluminum-Silicon Casting Alloys: Atlas of MicrofractographsBy Malgorzata WarmuzekThis electronic atlas provides an in-depth understanding of the metallurgy and fracture behavior of aluminum-silicon casting alloys, which are used in a wide variety of automotive, aerospace, and consumer product applications. The atlas includes over 300 high-definition microfractographs of fracture profiles and fracture surfaces, accompanied with detailed descriptions and analysis of the fracture features and their significance in the selection, processing, properties, and performance of the alloy. Published by ASM.

ISBN: 978-1-61503-075-0, 125 pp., PDF Only 2004.


Aluminum Recycling and Processing for Energy Conservation and SustainabilityBy John A.S. GreenEnergy and sustainability are critical factors for economic development. This comprehensive electronic publication provides a detailed overview and fundamental analysis of sustainability issues associated with the aluminum industry. Information includes concepts and application of life-cycle assessments that benchmark aluminum-industry efforts towards sustainable development. Published by ASM.

ISBN: 978-1-61503-057-6, 270 pp., PDF Only 2007.






Materials

21

Fatigue and Durability of Metals at High TemperaturesBy G.R. Halford, S.S. MansonFatigue and Durability of Metals at High Temperatures describes the method of strain-range partitioning for analyzing time-dependent fatigue. Topics covered include creep deformation for monotonic and cyclic loading, and strain-range positioning for multi-axial loading conditions. Published by ASM.

ISBN: 978-1-61503-054-5, 276 pp., PDF Only 2009.


Fatigue and Durability of Structural MaterialsBy G.R. Halford, S.S. MansonFatigue and Durability of Structural Materials explains how mechanical material behavior relates to the design of structural machine components. The major emphasis is on fatigue and failure behavior using engineering models that have been developed to predict, in advance of service, acceptable fatigue and other durability-related lifetimes. Coverage focuses on metallic materials but also addresses unique capabilities of important nonmetals. Published by ASM.

ISBN: 978-1-61503-074-3, 470 pp., PDF Only 2006.


Elements of Metallurgy and Engineering AlloysBy F.C. CampbellElements of Metallurgy and Engineering Alloys provides thorough and systematic coverage on both basic metallurgy and the practical engineering aspects of metallic material selection and application. Published by ASM.

ISBN: 978-1-61503-058-3, 670 pp., PDF Only 2008.


Corrosion of WeldmentsBy J.R. DavisCorrosion failures of industrial components are commonly associated with welding. Corrosion of Weldments details the many forms of weld corrosion and the methods used to minimize weld corrosion. Chapters on specific alloys groups describe both general welding characteristics and the metallurgical factors that influence corrosion behavior, corrosion problems associated with dissimilar metal weldments are examined, and more. Published by ASM.

ISBN: 978-1-61503-051-4, 227 pp., PDF Only 2006.






Materials

22

Heat Treatment of Gears:A Practical Guide for EngineersBy A.K. RakhitIncreased demand for gears to transmit more power through smaller, lighter, quieter, and more reliable packages that must operate over a wide range of service conditions, has made the design and manufacture of gears much more complex. This electronic publication is designed to provide the gear design engineer with a better understanding of heat treatment and its effects on gear quality and performance, especially as these considerations are critical to ensuring that the gears perform satisfactorily under anticipated service conditions. Published by ASM.

ISBN: 978-1-61503-069-9, 219 pp., PDF Only 2000.


Gear Materials, Properties, and ManufactureBy J.R. DavisThis electronic publication addresses all critical technical aspects of gear materials technology. Coverage includes an overview of the various types of gears used, important gear terminology, applied stresses and strength requirements associated with gears, and lubrication and wear; in-depth treatment of metallic and plastic gear materials; the material of choice for high-performance power transmission gearing; and more. Published by ASM.

ISBN: 978-1-61503-049-1, 348 pp., PDF Only 2005.


Fundamentals of Electrochemical CorrosionBy R.A. Buchanan, E.E. StansburyFundamentals of Electrochemical Corrosion covers the essential aspects of the corrosion behavior of metals in aqueous environments. Published by ASM.

ISBN: 978-1-61503-067-5, 500 pp., PDF Only 2000.


Fracture Resistance of Aluminum Alloys: Notch Toughness, Tear Resistance, and Fracture ToughnessBy J. Gilbert KaufmanFracture Resistance of Aluminum Alloys presents one of the most complete compendiums of notch-tensile, tear, and fracture toughness data ever compiled. Information and data are included for a wide range of aluminum alloys, tempers, and products; typical and minimum plane-stress and plane-strain fracture toughness values are given for many high strength alloys; effects of temperature are covered; and fracture data for welds as well as the parent alloys and products also are included. Published by ASM.

ISBN: 978-1-61503-061-3, 234 pp., PDF Only 2001.






Materials

23

Metallurgy for the Non-MetallurgistBy Harry ChandlerMetallurgy for the Non-Metallurgist is a basic reference for the non-metallurgist or for a professional who need to refresh their understanding of a particular topic. Well-illustrated and indexed, the publication makes technical subjects easy to understand and provides a complete glossary of metallurgical terms. Published by ASM. Chapters include:• SteelsandCastIrons:TheWhyofWhere

They Are Used • NonferrousMetalsandAlloys:TheWhy

Behind Where They Are Used • HeatTreatmentofSteel• TailoringthePropertiesofNonferrousAlloys• HotWorkingandColdWorkingofFerrous

and Nonferrous Metals • FabricabilityofMaterials:AKeyFactorin

Selection •TheMaterialSelectionProcess•FailureofMetalsunderServiceConditions•CopingwithCorrosion•QuestforQuality•andmore

ISBN: 978-1-61503-065-1, 284 pp., PDF Only 1998.


Introduction to Aluminum Alloys and TempersBy J. Gilbert KaufmanSince aluminum alloys offer an excellent combination of light weight, high-strength, great corrosion resistance and reasonable cost, they have become one of the most commonly used metal groups today. This electronic publication addresses the need for basic information on aluminum alloys and their tempers. The author provides the reader with an understanding of the advantages and limitations of aluminum alloys and temper combinations in terms of the relationship of their composition, process history, and microstructure to service requirements. The temper designation of an aluminum alloy provides the user with background information as to how the alloy has been produced in order to obtain specific and desired properties and characteristics.

ISBN: 978-0-87170-689-8 265 pp., PDF Only 2000.


How to Organize and Run a Failure InvestigationBy Daniel P. DenniesLearning the proper steps for organizing a failure investigation ensures success. How to Organize and Run a Failure Investigation outlines a proven systematic approach to failure investigation. It explains the relationship between various failure sources (corrosion, for example) and the organization and conduct of the investigation. This electronic publication provides a learning platform for engineers from all disciplines: materials, design, manufacturing, quality, and management. Published by ASM.

ISBN: 978-1-61503-048-4, 232 pp., PDF Only 2005.


High-Temperature Corrosion and Materials ApplicationBy George Y. LaiThis electronic publication addresses concerns, technologies, and materials available for those engaged in high-temperature applications. Topics include erosion and erosion-corrosion, low NOx combustion in coal-fired boilers, fluidized bed combustion, and the special demands of waste-to-energy boilers, waste incinerators, and black liquor recovery boilers in the pulp and paper industry. Published by ASM.

ISBN: 978-1-61503-055-2, 468 pp., PDF Only 2007.






Materials

24

Stainless Steels for Design EngineersBy Michael F. McguireStainless Steels for Design Engineers is a technical guide for anyone who designs or builds with stainless steels. Loaded with property data, it is a valuable resource for designers and engineers selecting and specifying stainless steels, and for working with new steel types or on new applications. Published by ASM.

ISBN: 978-1-61503-059-0, 310 pp., PDF Only 2008.


Protective Coatings for Turbine BladesBy Y. TamarinProtective Coatings for Turbine Blades addresses the problem of surface protection for aircraft engine turbine blades. Information describes and details a methodology for optimizing turbine blade surface protection. Published by ASM.

ISBN: 978-1-61503-070-5, 248 pp., PDF Only 2002.


Parametric Analyses of High-Temperature Data for Aluminum AlloysBy J. Gilbert KaufmanParametric Analyses of High-Temperature Data for Aluminum Alloys contains background educational materials on parametric analyses, extensive data, and previously unpublished master high-temperature curves for wrought and cast aluminum alloys. Published by ASM.

ISBN: 978-1-61503-053-8, 171 pp., PDF Only 2008.


Powder Metallurgy Stainless Steels: Processing, Microstructures, and PropertiesBy Prasan K. Samal, Erhard KlarPowder Metallurgy Stainless Steels is a comprehensive reference to obtain good corrosion resistance properties of sintered stainless steels with careful processing, starting with powder selection, avoidance of contamination, efficient delubrication, and controlled sintering and cooling. Published by ASM.

ISBN: 978-1-61503-052-1, 246 pp., PDF Only 2007.






Materials

25

Surface Engineering for Corrosion and Wear ResistanceBy J.R. DavisSurface Engineering for Corrosion and Wear Resistance provides practical information to help engineers select the best possible surface treatment for a specific corrosion or wear application. Published by ASM.

ISBN: 978-1-61503-072-9, 287 pp., PDF Only 2001.


Superalloys: A Technical Guide, 2nd Ed.By Stephen J. Donachie, Matthew J. DonachieSuperalloys provide the most reliable and cost-effective means of achieving high operating temperature and stress conditions in aircraft and industrial gas turbines and in a wide variety of other applications. This electronic publication covers virtually all technical aspects related to the selection, processing, use, and analysis of superalloys. Published by ASM.

ISBN: 978-1-61503-064-4, 438 pp., PDF Only 2002.


Steels: Processing, Structure, and PerformanceBy George KraussThis electronic publication discusses the interrelationships between chemistry, processing, structure, and performance for all the types of steel; the evolution, characterization, and performance of steel microstructures, low carbon sheet steels, and more. Published by ASM.

ISBN: 978-1-61503-050-7, 634 pp., PDF Only 2005.


Steel Metallurgy for the Non-MetallurgistBy John D. VerhoevenThis electronic publication explains the metallurgy of steel and its heat treatment for non-metallurgists. It starts from simple concepts and builds to more complex concepts involved in heat treatment of most all types of steel as well as cast iron. Published by ASM.

ISBN: 978-1-61503-056-9, 218 pp., PDF Only 2007.






Materials

26

Understanding How Components Fail, 2nd Ed.By Donald J. WulpiUnderstanding How Components Fail provides coverage of many important failure analysis concepts and analytical techniques needed in failure investigations. Basic principles and practices are clearly explained, with numerous examples featuring commonly used metals, parts, and service environments. Published by ASM.

ISBN: 978-1-61605-071-2, 293 pp., PDF Only 1999.


Titanium: A Technical Guide2nd editionBy Matthew J. DonachieTitanium: A Technical Guide provides a concise summary of the most useful information required to understanding titanium and its alloys. The author provides a review of the significant features of the metallurgy and application of titanium and its alloys. All technical aspects of the use of titanium are covered, with sufficient metals property data for most users. Published by ASM.

ISBN: 978-1-61503-062-0, 389 pp., PDF Only 2000.


Surface Wear: Analysis, Treatment, and PreventionBy R. ChattopadhyaySurface Wear Analysis, Treatment, and Prevention provides a multidisciplinary approach to understanding wear, diagnosing its causes, and prescribing appropriate treatments and preventive measures. The surface engineering techniques and practical guidance provided can be applied to the design, manufacture, and maintenance of machinery to provide cost-effective improvements in the performance of engineered components. Published by ASM.

ISBN: 978-1-61503-060-6, 318 pp., PDF Only 2001.


Metals & Alloys in the Unified

Numbering System

www.sae.org/uns

on the Web




http://www.sae.org/uns

Power and Propulsion

27

CI Engine Performance for Use With Alternative Fuels, and New Diesel Engines and Components2005This technical paper collection contains 20 papers detailin g CI engine performance using alternative fuels and diesel engines and components.Visit collections.sae.org.

Online 2010


CI Engine Performance for use with Alternative Fuels2008Focusing on the effects of alternative fuels in compression ignition engines this technical paper collection contains 21 papers. Topics covered include hydrogen, ethanol, methane, biodiesel and synthetic diesel fuel. Data pertaining to emissions reduction, performance, combustion analysis, efficiency, and durability for both experimental as well as numerical investigations is also covered.Visit collections.sae.org.

Online 2010


Advanced Hybrid Vehicle Powertrains2010The 15 papers in this technical paper colection covers engines and thermal management for hybrid powertrains and fuel economy testing methods for hybrid and plug-in hybrid electric vehicles. Hybrid system modeling and architecture including pneumatic, thermoelectric, and flywheel systems, and plug-in hybrid electric systems is covered. Finally, production and near-production hybrid powertrains and powertrain system integration as well as energy transfer and communications for plug-in hybrid and battery electric vehicles is covered.Visit collections.sae.org.

Online 2010


NEW

NEW

NEW

P101140

It’s your world, make the most of it.

The global network for mobility engineers.

Announcing the hottest and newest member bene� t, EngineerXchange, an online professional network that gives SAE Members exclusive access to powerful networking tools, career counseling/management features, and advance access to SAE technical content. It’s the no-nonsense spot on the web for the mobility industry … the members of SAE.

Get connected and get exclusive access through a seamless, customizable online experience for SAE Members only!

Visit ex.sae.org to Xperience it Today!

Not an SAE Member? Join today or learn more at saeignite.sae.org

http://www.ex.sae.org

http://saeignite.sae.org





28

Engine Boosting Systems2010Trends of ever increasing power density, better fuel economy and reduced emissions are increasing focus on turbocharging/supercharging and turbochargers/superchargers, as part of overall engine system optimization. Increased amounts of EGR and use of aftertreatment devices present new challenges. The 16 papers in this technical paper collection cover conceptual, modeling and experimental studies relating to advanced turbochargers/superchargers and advanced boosting systems to respond to above challenges.Visit collections.sae.org.

Online 2010


Diesel Fuel Injection and Sprays2008This publication is devoted to experimental and computational work in the area of diesel fuel injection and sprays. The 23 papers in this technical paper collection cover the following topics: spray characterization, cavitation, multiphase jet modeling, wall films and impingement, hydraulic circuit analysis, and dissolved gas effects.Visit collections.sae.org.

Online 2010


Diesel Fuel Injection and Sprays2009The 20 papers in this technical paper collection cover topics that include: spray characterization, multiphase jet modeling, CFD models for spray processes, wall films and impingement, hydraulic circuit analysis, and dissolved gas effects.Visit collections.sae.org.

2010. Onlie.


Compression Ignition Combustion Processes2008The materials presented in this technical paper collection help advance the art and science of compression ignition engine performance and emissions. The 18 papers include modeling and experimental results regarding the physical and chemical processes that occur in compression ignition engines, along with the resulting emissions.Visit collections.sae.org.

Online 2010


NEW

NEWNEW

NEW








29

Homogeneous Charge Compression Ignition Engines2009This technical paper collection contains 40 papers on HCCI combustion in diesel and gasoline engines. Effects of mixture preparation, injection timing, valve overlap, EGR and intake temperature are presented.Visit collections.sae.org.

Online 2010


Engine Control and Optimization in Hybrid Powertrains2010The 7 papers in this technical paper collection cover engine and powertrain control and optimization for hybrid powertrain applications. New components, control algorithms, and strategies applicable for hybrid powertrain systems are discussed.Visit collections.sae.org.



Engine Control and Calibration2010The 14 papers in this technical paper collection cover engine calibration and control, system design and development, improving fuel economy and performance, reducing emissions and providing reliable robust diagnostics. Topics covered include advanced engine control and calibration methodologies, advanced control algorithms, combustion control, model based controls development, emission control and diagnostics. Visit collections.sae.org.

Online 2010


Engine Combustion: Pressure Measurement and AnalysisBy David R. RogersThis book provides practical information on measuring, analyzing, and qualifying combustion data, as well as details on hardware and software requirements and system components. Describing the principles of a successful combustion measurement process, the book will enable technicians and engineers to efficiently generate the required data to complete their development tasks. Readers will learn:•Thefeaturesandfunctionsofequipment•Bestpracticesforsuccessfulmeasurements•Howtorecognizeanddiagnoseproblems

ISBN: 978-0-7680-1963-6, 332 pp., Hardbound 2010.


NEW

NEWNEW

NEW






30

Homogeneous Charge Compression Ignition (HCCI) Combustion2005This technical paper collection contains 48 papers detailing HCCI engine operating conditions, HCCI engine combustion, fuel economy improvement, NOx and N2O formation in HCCI, load control, and more.Visit collections.sae.org.

Online 2010


Homogeneous Charge Compression Ignition (HCCI) Combustion2006This technical paper collection includes 49 papers detailing homogeneous charge compression ignition combustion. Topics include: HCCI Combustion Processes, The Interaction Between Fuel Chemicals and HCCI Combustion Characteristics, Modeling Diesel Engine NOx , The Influence of NO on the Combustion Phasing in an HCCI Engine, Modelling and Experimental Investigations of Supercharged HCCI Engines, and more.Visit collections.sae.org.

Online 2010


Homogeneous Charge Compression Ignition Engines2007This technical paper collection contains 41 papers on studies of HCCI combustion in gasoline engines. Topics cover effects of injection timing, negative valve overlap, EGR and intake temperature.Visit collections.sae.org.

Online 2010


Homogeneous Charge Compression Ignition Engines2008This technical paper collection presents studies on HCCI combustion in gasoline engines. The 38 papers cover effects of injection timing, negative valve overlap, EGR and intake temperature.Visit collections.sae.org.

Online 2010


NEW

NEWNEW

NEW

SAE Digital Librarytechnical information when you need it

The SAE Digital Library is the preeminent source for advancing mobility engineering worldwide.This collection of intellectual property from mobility experts around the world focuses on current and historical technology advancements within the mobility industry. It provides thousands of ways to power new product development, reduce costs, facilitate project planning and support compliance of globalization programs.

sae.org/dl

http://sae.org/dl






31

Modeling of SI and Diesel Engines2007The 34 papers in this technical paper collection cover engine breathing, intakes and exhausts; engine combustion, SI Engines; and modeling of engines for control applications.Visit collections.sae.org.

Online 2010


Mixing-Controlled CD Combustion2010The 35 papers in this technical paper collection features CI combustion technologies distinguished by mixing processes that influence combustion and combustion phasing closely coupled to the timing of fuel injection. Topics covered include fuel injection effects, alternative fuel, diesel fuels and combustion, and optimization and modeling. Visit collections.sae.org.

Online 2010


Military Vehicle Technology2005This technical paper collection contains 49 papers detailing military vehicle technology. Topics covered include: reliability growth for military vehicles, upgrading readiness, rapidly installed fluid transfer system, robotic technologies, electrical systems modeling and simulation, nanofluid research, and more.Visit collections.sae.org.

Online 2010


Kinetically Controlled CI Combustion and Controls2010The 35 papers in this technical paper collection features CI combustion technologies distinguished by mixing processes that influence combustion and combustion phasing closely coupled to the timing of fuel injection. Topics covered include fuel injection effects, alternative fuel, diesel fuels and combustion, and optimization and modeling. Visit collections.sae.org.

Online 2010


NEW

NEWNEW

NEW






32

Multi-Dimensional Engine Modeling2008Multi-dimensional engine modeling has gradually established itself in the engineering community as a means to gain a deeper understanding of processes related to turbulent, transient, chemically reacting, two-phase flows. The 27 papers in this technical paper collection reflect the truly multidisciplinary nature of the field covering areas such as chemical kinetics, combustion and spray modeling, turbulence, mesh generation, and approaches targeting improved computational efficiency.Visit collections.sae.org.

Online 2010


Multi-Dimensional Engine Modeling2010The 18 papers in this technical paper collection reflect the truly multidisciplinary nature of multi-dimensional engine modeling and cover advances in areas such as chemical kinetics, combustion and spray modeling, turbulence, mesh generation, and approaches targeting improved computational efficiency.Visit collections.sae.org.

Online 2010


Modeling of SI and Diesel Engines2010This technical paper collection contains 33 papers dealing with the development of 0-, 1- and quasi-dimensional models for the thermo- and fluid-dynamic processes in both SI and CI engines. Topics covered include diesel combustion, mechanical systems, fundamental and SI combustion, engine breathing and boosting, controls and injection, mechanical systems, and thermodynamic cycles.Visit collections.sae.org.

Online 2010


Modeling of SI and Diesel Engines2005This technical paper collection contains 33 papers that focus on modeling of SI and diesel engines.Visit collections.sae.org.

Online 2010


NEW

NEWNEW

NEW








33

SI Combustion and Direct Injection SI Engine Technology2010The 37 papers in this technical paper collection focus on SI combustion technologies that employ direct, in-cylinder fuel injection. Topics of particular interest include in-cylinder fuel injection and spray studies, flow/spray interaction and in-cylinder mixture formation studies, and combustion chamber shape optimization. Papers also focus on combustion technologies in 4-stroke and 2-stroke engines, including premixed, port injected, and DI engine.To see a listing of papers included in this special publication, click on the papers link below.Visit collections.sae.org.

Online 2010


Practical Diesel-Engine Combustion AnalysisBy Bertrand HsuThis book examines some basic characteristics of diesel engine combustion process, and describes the commonly used tool to analyze combustion - heat release analysis. It also describes the performance changes that might be encountered in the engine user environment, with a goal of helping the reader analyze his own practical combustion problems.Chapters include:•CombustionandFuel-InjectionProcessesin

the Diesel Engine•HeatReleaseanditsEffectonEngine

Performance•AlternateFuelsCombustionAnalysis•andmore



New Engines and Components2010The 20 papers in this technical paper collection discuss a variety of new engine concepts and advanced component designs for improved performance, reduced fuel consumption and reduced emissions.Visit collections.sae.org.

Online 2010


New Diesel Engines and Components and CI Engine Performance for Use with Alternative Fuels2006This technical paper collection contains 17 papers that cover emission and combustion characteristics, development of DME engine, biodiesel fuels, and opposed piston opposed cylinder (OPOC) engine performance development.Visit collections.sae.org.

Online 2010


NEWNEW

NEW






34

SI Combustion and Direct Injection SI Engine Technology2005The 33 papers in this technical paper collection cover direct injection spark ignition engines, two-stage gasoline direct injection combustion system, combustion characteristics, particulate emissions, and more.Visit collections.sae.org.

Online 2010


SI Combustion and Direct Injection SI Engine Technology2006The 29 papers in this technical paper collection focus on SI combustion and direct injection SI engine technology. Topics covered include: knock characteristics, spray characterization in a DISI engine, reducing NOx emissions, and more.Visit collections.sae.org.

Online 2010


SI Combustion and Direct Injection SI Engine Technology2008The 30 papers in this technical paper collection present topics in the field of spark-ignited combustion and technologies that improve the efficiency and emissions of spark-ignition engines by improving fuel preparation, gas exchange, ignition, and the combustion process itself. This includes alternative fuel and bio-fuel applications in terms of how they affect the combustion process. Papers also explore advancements in DISI engine technology, including spray formation and mixing, injection technology and modeling strategies, and its synergies with other advanced engine technologies.Visit collections.sae.org.

Online 2010


SI Combustion and Direct Injection SI Engine Technology2009Direct injection spark ignition (DISI) engines will play a major role in improving vehicle fuel efficiency. The 41 papers in this technical paper collection explore the advancements in DISI engine technology, including spray formation and mixing, injection technology and modeling strategies, and its synergies with other advanced engine technologies. Also included are papers on general topics in the field of spark-ignited combustion and gasoline engines.Visit collections.sae.org.

Online 2010


NEW

NEWNEW

NEW






35

Variable Valve Actuation2007The 13 papers in this technical paper collection discuss variable valve actuation mechanisms, devices, systems and the impact of such systems on thermodynamics, combustion, fuel economy, emissions and controls.Visit collections.sae.org.

Online 2010


Variable Valve Optimization2008The 16 papers in this technical paper collection cover variable valve actuation mechanisms, devices, and systems; and the impact and control of such systems on thermodynamics, combustion, fuel economy, emissions, and performance.Visit collections.sae.org.

Online 2010


Variable Valve Actuation2010The 13 papers in this technical paper collection discuss variable valve actuation mechanisms, devices, and systems; and the impact and control of such systems on thermodynamics, combustion, fuel economy, emissions, and performance.Visit collections.sae.org.

Online 2010


Transmission and Driveline2010This technical paper collection contains 30 papers that detail transmissions and drivelines. Topics covered include: simulation/modeling, components/subsystems, controls, all wheel drive/ NVH/launch devices, hybrid powertrain concepts, and transmission systems/drive units.Visit collections.sae.org.

Online 2010


NEW

NEWNEW

NEW





36


Safety

Biomechanics2010This technical paper collection contains 11 papers that focus on occupant protection biomechanics.Visit collections.sae.org.

Online 2010


Accident Reconstruction2010This technical paper collection contains 25 papers dealing with topics relevant to the reconstruction of on-road and off-road vehicular accidents. Topics include vehicle dynamic simulation programs, human factors, reconstruction of accidents involving motorcycles and reconstruction of light vehicle rollover accidents, and the latest research on event data recorders (EDRs). Emphasis is placed on the application, interpretation and use of EDRs in the investigation of motor vehicle crashes.Visit collections.sae.org.

Online 2010


Variable Valve Actuation2005The 13 papers in this technical paper collection discuss variable valve actuation. Topics covered include twin mechanical variable lift, cam profile switching, fully variable mechanical valvetrain, intelligent valve actuation system, and more.Visit collections.sae.org.

Online 2010


NEW NEW

NEW


P91574

The SAE International Journal of Engines publishes peer reviewed cutting-edge technical papers providing the most authoritative and in-depth work in engine research. Coverage includes: Homogeneous Charge Compression Ignition; Spark Ignition Engines; Diesel Engines; Electric Vehicles; Fuel Cell Vehicle Applications; Combustion; Electronic Engine Controls; Engine Components; Emissions Control Systems; and Fuel Economy. The journal is available in print and online formats. SAE International is partnering with HighWire Press to produce the online journals. The online format features rich linking systems that facilitate academic research, discovery, and citation.


F O U N D E D

J A N U A R Y 1 9 0 5

✽ ✽

SAE International






37

Safety

Safety Critical Systems2010The 6 papers in this technical paper collection focus on implementation of safety-relevant systems and software, fail-safe strategies, distributed fault tolerant systems and hazard analysis. Application areas addressed include: active safety, active chassis and alternative energy systems and the draft international standard for functional safety - ISO 26262.Visit collections.sae.org.



Rear Impact, Side Impact, and Rollover2010This technical paper collection contains 20 papers presenting new technologies and research in the area of vehicle rear-end collision, rollover collision and lateral impacts. Papers may be related to analysis of crash compatibility, statistical data analysis, design of vehicle systems, biomechanics and dummy development.Visit collections.sae.org.

Online 2010


Human Factors in Driving, Telematics and Seating Comfort2005The 21 papers in this technical paper collection cover driver crash avoidance behavior; factors that influence drivers’ response choice decisions; collision avoidance systems; steering wheel switch technology; effects of hands-free phone conversation on visual behavior; seat support evaluation; and more.Visit collections.sae.org.

Online 2010


Driver Distraction ResearchThis technical collection features 24 technical papers published between 1998-2010 covering topics such as telematics, driver assistance systems, driver fatigue, human machine interfaces, and crash prevention systems.Visit collections.sae.org.

Online 2010


NEW

NEWNEW

NEW





Safety

38

Tire Forensic InvestigationAnalyzing Tire FailureBy Thomas GiapponiThis book covers the many ways that a tire can fail, and shows how to identify that failure. Based on the author’s 30 years of experience in the tire industry, the book looks at the methodical, physical, visual and tactile examination of the failed tire and identifies the various failure modes for passenger car and light truck tires.Chapters cover: •BeltSeparation•Non-BeltSeparationIdentification•BalanceWeightMarkIdentificationand

Significance•andmore

ISBN: 978-0-7680-1955-1, 238 pp., 10 Chapters, Paperbound 2008.


Safety Test Methodology and Structural Crashworthiness and Occupant Safety2010The 16 papers in this technical paper colection present advancement of auto safety-related technologies that deal with roof crush testing, pedestrian safety, front, side and rear impact, simulation of interior head impact, FE study of factors onriskofKTHinjuriesinfrontalimpact,CAE methods and testing, and field modeling and assessment techniques.Visit collections.sae.org.

Online 2010


NEW

2010 SAE Accident Reconstruction Technology Collection on CD-ROMThis comprehensive collection of full-text documents gives you points of comparison for your investigative reports, standard formulas and test results, and insight to the latest technologies and their applications.

2010 SAE Occupant Protection and Crashworthiness Technology Collection on CD-ROMThis comprehensive resource will help you meet FMVSS requirements, ensure your designs meet regulated injury criteria, minimize liability, and get your products to market quickly.

Stapp Car Crash Conference® Technical Papers on CD-ROMGet quick access to the latest technical papers from Stapp Car Crash Conferences held from 1966 through 2008, plus 1993 and 1997 Child Occupant Protection Symposiums. With this comprehensive, fully searchable collection, you get 1,150 technical papers covering the latest worldwide developments in passenger injury, side impact, biomechanics, child passenger protection, restraint system performance, crash dummy development and performance, and more.

SAE Safety Products on CD-ROM

For more information on these products visit store.sae.org/webcd.htm

P91333


http://store.sae.org/webcd.htm


Systems and Components

39

Thermal Systems & Management Systems2007Providing thermal comfort to the occupants and thermal management of components in an energy efficient way has challenged the automotive industry to search for new and innovative approaches to thermal management. Hence, management of heat flow, coolant flow, oil flow, and airflow is extremely important as it directly affects the system performance under full range of vehicle operating conditions. The 31 papers in this technical paper collection describe methods or concepts to increase efficiency, improve occupant comfort, improve test methodology and minimize the environmental impact of the climate control system; and thermal management components addressing design and/or application topics.Visit collections.sae.org.

Online 2010


NEW

P91578

The SAE International Journal of Passenger Cars - Mechanical Systems publishes peer reviewed cutting-edge technical papers on the latest developments in brake system design, chassis stability, ride comfort simulation, tire rolling resistance and vehicle thermal systems issues. It also includes papers on external vehicle design issues such as structural optimization, aerodynamics and crash resistance. Finally included are papers on a variety of safety issues such as rollover testing, fi re safety and human performance (dummy testing).

The journal is available in print and online formats. SAE International is partnering with HighWire Press to produce the online journals. The online format features rich linking systems that facilitate academic research, discovery, and citation.


F O U N D E D

J A N U A R Y 1 9 0 5

✽ ✽

SAE International

SAE in-house training or e-learning - technical training at your convenience.

Customized in-house training – we bring customized technical training to your facility

Electronic learning – technical training delivered right to you via the internet or CD-ROM

SAE in-house or variable format electronic learning:• convenient&costeffective – training at your facility

means no travel and no time out of the office

• highestquality – all SAE courses are conducted by leading academic and industry instructors

• andthemostrelevanttopics – a comprehensive list of courses in technology, management, and business

Visit mylearn.sae.org or contact Customer Service:[email protected] or 1-877-606-7323 (1-724-776-4970 outside the US or Canada)

P100551


http://mylearn.sae.org

mailto:[email protected]


Tests and Testing

40

Engine Flows and Combustion Diagnostics, 2010The 10 papers in this technical paper collection focus on extending and improving various sensors and diagnostic methods that can be employed to examine the flow and combustion processes in both production engines and research environments. Examples of diagnostics of interest include, but are not limited to: pressure sensors, ion probes, exhaust gas composition analyzers, and various optical techniques.Visit collections.sae.org.

Online 2010


Analysis Techniques for Racecar Data AcquisitionBy Jorge SegersData acquisition has become an invaluable tool for establishing racecar - and car/driver - performance. This book provides a thorough overview of the varied methods for analyzing racecar data acquisition system outputs, with a focus on vehicle dynamics.Topics include:•Dataanalysissoftwarerequirements•Straight-lineacceleration•Braking,gearing,andcornering•Quantifyingrollstiffnessdistribution•andmuchmore



NEW

P91053

Create your own ebook library

The new SAE Bookstore now offers selected titles in electronic format and will be adding more on a regular basis- so check back often. Choose an entire ebook or specific chapters, and select the format that is compatible with your smartphone, computer, or ebook reader.

New from SAE:

Visit books.sae.org to browse and create your portable library today.




Vehicles and Performance

41

Steering & Suspension Technology and Tire & Wheel Technology, 2006The 31 papers in this technical paper collection cover topics such as steering system development, power steering systems, steer-by-wire systems, EPS, suspension systems, tires, and more.Visit collections.sae.org.

Online 2010


Riding on AirA History of Air SuspensionBy Jack GieckThis publication covers the history of air suspension, from the earliest patents in the mid-19th century to more current developments. Beginning on buses, air suspension expanded into passenger rail vehicles, only to be followed by a crashing failure on passenger cars. But after several precarious years, air suspension began to win almost universal acceptance on trucks and trailers, and then in mass transportation, eventually making a successful return to passenger cars.


Noise and Vibration, 2010The 13 papers in this technical paper collection cover chassis related noise and vibration issues, key aspects of interior vehicle noise and vibration, and theoretical and applied aspects of Powertrain noise and vibration generation, propagation and control.Visit collections.sae.org.

Online 2010


The Global Motorcycle ReportThe Global Motorcycle Report examines market conditions across Western Europe, North America as well as key emerging countries such as China and India. Also considered are the latest developments in technology, along with profiles of 23 OEM’s and 17 suppliers. Published by Supplier Business Ltd.

149 pp., PDF Only 2010.


NEWNEW






42

Vehicle Dynamics and Simulation2006The 34 papers in this technical paper collection provide research and findings focused on vehicle dynamics and simulation.Visit collections.sae.org.

Online 2010


Vehicle Dynamics & Simulation2007The 33 papers in this technical paper collection discuss vehicle dynamics and simulation in the areas of vehicle rollover, tire forces/moments and vehicle stability, vehicle dynamics handling and control, advances in methods for vehicle systems design and control, and advances in vehicle dynamics measurements and validations.Visit collections.sae.org.

Online 2010


Vehicle Aerodynamics2010The 24 vehicle aerodynamic papers in this technical paper collection cover topics such as cooling airflow, aerodynamic optimization and aero add-ons, transient flows and effects, and wind tunnel development and simulation tools.Visit collections.sae.org.

Online 2010


Steering and Suspension, Tires and Wheels2005The 28 papers in this technical paper collection focus on improving steering characteristics, suspension systems, tires, four wheel steer vehicle, variable rack stroke system, and more.Visit collections.sae.org.

Online 2010


NEW

NEWNEW

NEW








43

Vehicle Dynamics and Tire and Wheel Simulation2008The 22 papers in this technical paper collection detail tire and wheel technology, tire rolling resistance, tire sidewall cooling, and features a series of papers relating to “aged tire durability”. Also included are vehicle dynamics and simulation papers focusing on vehicle stability and control; vehicle sub-systems modeling and responses; advances in vehicle systems dynamics; vehicle motion simulations and analysis; and vehicle dynamics analysis.Visit collections.sae.org.

Online 2010


NEW

P91053

Create your own ebook library The new SAE bookstore now offers a selected titles in electronic format and will be adding more ona regular basis- so check back often. Choose an entire ebook or specific chapters, and select the format that is compatible with your smartphone, computer, or ebook reader.

Visit books.sae.org to browse and create your portable library today.

New from SAE:

P100279AUTO

The Automotive Industry is Changing

And SAE International has changed to help you keep pace with it

SAE International wants you to succeed. That’s why we now have four levels of membership.

Each one has been re-engineered and optimized to help you network with automotive engineering professionals, stay on top

of the latest technologies and help take your career to the next level.

We’ll even help you decide which membership level is right for you with our exclusive membership e-Valuator. It’s easy. It’s quick. And it’s free. Give it a spin at saeignite.sae.org.


http://saeignite.sae.org


Engine Combustion: Pressure Measurement and AnalysisProduct Code: R-388

Fundamentals of Automobile Body Structure DesignProduct Code: R-394

Principles of Vibration Analysis with Applications in Automotive EngineeringProduct Code: R-395

Vehicle Accident Analysis and Reconstruction Methods2nd EditionProduct Code: R-397

Automotive Fuels Reference Book3rd EditionProduct Code: R-297

Introduction to Internal Combustion Engines4th EditionProduct Code: R-391

Advanced Hybrid Powertrain for Commercial VehiclesProduct Code: R-396

Ground Vehicle Aerodynamics with ApplicationsProduct Code: R-392

Large Vehicle DynamicsProduct Code: R-393

Brake Design and Safety3rd EditionProduct Code: R-398

Active Control of Vehicle DynamicsProduct Code: R-390

Driver Performance Metrics: Object and Event DetectionProduct Code: RR-019

SAE Ferrous Materials Standards Manual2010 EditionProduct Code: HS-30/2010

SAE Truck and Bus Control Communications Network Standards Manual2010 EditionProduct Code: HS-1939/2010

SAE Fastener Standards Manual 2010 EditionProduct Code: HS-4000/2010

On-Board Diagnostics for Light and Medium Duty Vehicles Standards Manual2011 EditionProduct Code: HS-3000/2011

Electric and Hybrid-Electric VehiclesVolume 2Product Code: PT-143

Head Injury Biomechanics

Systems Engineering

Pregnant Occupants

New Frontal Crash Dummies

Watch for These Titles in Development!

2010 fall updates automotivebookstore catalog - …store.sae.org/catalog/auto2010fall.pdf · ·...

Documents