201 winecoff school road • concord, north carolina … staff is ready to assist with all your...
TRANSCRIPT
Since 1947 Ketchie, Inc formerly known as Ketchie-Houston has been supplying industry with custom gear products. Today we enjoy an excellent reputation with both original equipment manufacturers and industrial distributors throughout the country. Our customers include machine tool, printing, textile machinery and agricultural industries to name a few.
Our shop is equipped with everything from conventional equipment to state of the art CNC machines to handle your job with maximum efficiency. A wide range of equipment includes gear cutting, turning, grinding (except tooth forms), broaching, Milling and drilling. Ketchie, Inc then adds another feature that’s important to our customers, we test the gears we manufacture…a capa-bility that many gear manufacturers don’t have.
The manufacture of quality custom gear products starts with the turning of a blank. Our CNC and manual lathes are used to make small to medium quantity lots of blanks to a measured diameter of 22 inches. Vertical machines are used for turning blanks measuring up to 36 inch diameter to a height of 12 inches.
Our gear cutting department is comprised of a wide range of Fellows gear shapers. By using an assortment of similar equipment we often have available standard cutters which may preclude the need for a cutter tooling charge. Our machines are serviced and adjusted on a regular basis to insure your exacting requirements are met.
The most modern plant, the latest machines and skilled workers are not sufficient to assure a qual-ity product. Each manufacturing step must be checked to assure conformity to the tolerance speci-fications. Ketchie, Inc assures top quality by constant “In Process” inspection by our highly skilled quality assurance department using state of the art gear inspection equipment.
Ketchie, Inc has developed this Custom Gearing Product Guide to let you know our capabilities and our dedication to quality.
Our staff is ready to assist with all your custom spur gear, sprocket, timing pulley and spline needs.
www.ketchieinc.com [email protected]
Phone 704.786.5101 Fax 704.784.1521 Toll Free 888.550.0030
A blueprint, sketch or sample is usually all that is required forordering gears, sprockets, timing belt pulleys, etc. from Ketchie,Inc. In order for us to meet your requests, the following
Ordering Information
Spur Gears
Material
Number of Teeth
Pitch
Pressure Angle
Face Width
Bore Size
Keyway (Specify Width by Depth)
Setscrew (Number, Size & Location)
Hub Diameter
Length thru Bore
AGMA Quality
Heat Treatment
Quantity Required
Keyway (Specify Width by Depth)
Setscrew (Number, Size & Location)
Hub Diameter
Length thru Bore
Heat Treatment
Quantity Required
SprocketsDescription (Roller, Silent, Extended, etc)
Material
Number of Teeth
Pitch
Chain Number
Type (A, B, C)
Bore Size
Timing Belt Pulleys
Material
Number of Teeth
Pitch
Flange
Face Width
Bore Size
Keyway (Specify Width by Depth)
Setscrew (Number, Size & Location)
Hub Diameter
Length thru Bore
Bushing
Heat Treatment
Quantity Required
Spl ines
Material
Number of Splines
Pitch
Pressure Angle
Face Width
Hub Diameter
Hub Length
AGMA Quality
Heat Treatment
information is a guide when requesting price and delivery. Moredetailed information may be required for manufacture. For yourconvenience, this page may be photocopied.
201 Winecoff School Road • Concord, North Carolina 28027704.786.5101 ● Fax: 704.784.1521
Toll Free: 888.550.0030Email: [email protected]
www.ketchieinc.com
1
Width
Inside Dia. Outside Dia.
Pitch Dia.
FaceWidth
Bore
Pitch Dia.
Outside Dia.
Spur Gear Without Hub
Length thruBore
Hub ProjectionFaceWidth
Pitch Dia.
Outside Dia.
Bore
Hub Diameter
• AGMA Class 8• Inch, Metric Pitch• Size up to 36”Inside Diameter• 6” Face Width of Tooth Maximum• 3 DP – 32 DP• Heat Treatment Available
ManufacturingCapabilities:
• AGMA Class 8• Inch, Metric, Circular Pitch, Stub Tooth• Size up to 40” Outside Diameter• 6” Face Width• 3 DP – 32 DP• Webbed, Spoked (Casting Required) or Solid Available• Keyways & Setscrews Available• Heat Treatment Available
ManufacturingCapabilities:
• Steel• Pre Heat Treated Steel• Stainless Steel• Aluminum• Cast Iron• Ductile Iron• Bronze• Brass• Non-metallic Materials (Nylon, Phenolic, Delrin, etc.)
MaterialsAvailable:
• Steel• Pre Heat-Treated Steel• Stainless Steel• Aluminum• Bronze• Brass• Non-metallic Materials (Nylon, Phenolic, Delrin, etc.)• Cast Iron• Ductile Iron
MaterialsAvailable:
Spur Gear With Hub
CUSTOM SPUR GEARS - INTERNAL & EXTERNAL
INTERNAL SPUR GEAR
EXTERNAL SPUR GEAR
• 32/64 - 4/8 Pitch• Hub Available• Webbed or Solid• Heat Treatment Available
ManufacturingCapabilities:
• Steel• Stainless Steel• Cast Iron• Ductile Iron• Non-metallic Materials (Nylon, Phenolic, Delrin, etc.)
MaterialsAvailable:
CNC Turning
Pitch Dia.Outside
Diameter
PitchDiameterSpline
Inside Dia.
FaceWidth
Gear Tooth
CAD DepartmentFellows Gear Shaping
Individual part inspectionwith precisionBrown & Sharpe CMM
SPLINES - INTERNAL & EXTERNAL
INVOLUTE SPLINE - INTERNAL
4
Precision CNC Grinding
CNC Milling
ManufacturingCapabilities:
• Inch & Metric Pitch (Flat or Round Bottom Available)• Size up to 40”Outside Diameter• 6” Face Width• 1/5” – 7/8” Pitch• Keyways and Setscrews Available• Split, Taper & QD Bushings Available• Finished or Stock Bore Available• With or Without Hub• Flanged or Unflanged
• Steel• Stainless Steel• Cast Iron• Ductile Iron• Aluminum• Non-metallic Materials (Nylon, Phenolic, Delrin,etc.)
• Inch• Size up to 40”Outside Diameter• 3/8 – 3/4 Pitch• Center or Side Guide• Hub Available• Webbed, Spoked or Solid Available• Keyways and Setscrews Available• Heat Treatment Available
ManufacturingCapabilities:
• Steel• Cast Iron• Ductile• Other Materials on Request
MaterialsAvailable:
MaterialsAvailable:
Hub Dia.
HubProjection
OutsideDiameter
Bore
FaceWidth
Length thruBore
SILENT CHAIN SPROCKETS
TIMING BELT PULLEY
Length thruBore
FaceWidth
Bore HubDiameter
HubProjection
3
FaceWidth
Outside Diameter
Bore
A Type Sprocket• Inch, Metric Pitch• Size up to 40”Outside Diameter• 1/4 – 1 3/4 Pitch (Roller Chain)• Single or Multiple Chain• A Type• #25 – #140 Chain• Keyways Available• Heat Treatment Available
• Steel• Pre Heat Treated Steel• Stainless Steel• Cast Iron• Ductile• Bronze• Brass• Non-metallic Materials (Nylon, Phenolic, Delrin, etc.)
ManufacturingCapabilities:
• Inch, Metric Pitch• Size up to 40”Outside Diameter• 1/4 – 1 3/4 Pitch (Roller Chain)• Single or Multiple Chain• B Type• #25 – #140 Chain• Webbed, Spoked or Solid Available• Split, Taper & QD Bushings Available• Keyways and Setscrews Available• Heat Treatment Available
• Steel• Pre Heat Treated Steel• Stainless Steel• Cast Iron• Ductile• Bronze• Brass• Non-metallic Materials (Nylon, Phenolic, Delrin, etc.)
ManufacturingCapabilities:
MaterialsAvailable:
MaterialsAvailable:
B Type Sprocket
OutsideDiameter
Bore
Hub Diameter
HubLength
Length thruBore
Keyway
CUSTOM SPROCKETS & TIMING BELT PULLEYS
ROLLER CHAIN SPROCKETS
2