200t/day production plant operating in saudi arabia

Facilitated a successful installation of gypsum powder manufacturing plant in Hofuf, AlAhsa, Saudi Arabia and operation started in June,　2008. This factory can produce 200t of gypsum powder per day.

Plant Site

200T/DAY PRODUCTION PLANT OPERATING IN SAUDI ARABIA

Products

Quarry Site

Complete set of full-automatic equipment of production line for whole process from raw material homogenizing, preparation, dosing, mixing, forming, setting, cutting, drying, edge trimming and enfolding to stacking.

Faciltated a successful installation of rolling mill in Dammam, Saudi Arabia. The factory produces mild steel deformed bars, round bars, equal angles, channels and flat bars from steel billets.

Forming Station

Billet Feeder & Pusher

Cooling Bed For Round Bar& Deformed Bar

Reheating Furnace

Cold Shear Flying Crop Shear Cooling Bed For Shaft Packing Bed

Roughing Mill Stand Mid-Finish Mill Stand

DryerCutting Machine Paper-Covere Plasterboard Production Line

ROLLING MILL

Model : SM2012Thickness: 0.3mm - 2.0mmWidth : 1250mm maxLine speed : 150M/min. Max.

Model : LS2012Thickness: 0.3mm - 2.0mmWidth : 1250mm maxLine speed : 60M/min. Max.

SLITTING MACHINE

CNC Series CUT-TO-LENGTH LINE

Variety of Expanded Metal Meshes

4ft.~8ft. Leveling Machine

HIGH SPEED/HEAVY DUTY EXPANDED METAL MACHINE (Working width from 450mm - 3100mm)

HIGH FREQUENCY CARBON STEEL TUBE MAKING MACHINE (CONTINUOUS FLAT-END MACHINE)

Model BH40BH50BH60BH70BH80BH90BH115BH125

Specificationsø 9.5mm x 0.4t - 22.2mm x 1.0tø 12.7mm x 0.5t - 38.1mm x 2.0tø 19mm x 0.5t - 63.5mm x 3.5tø 19mm x 0.8t - 76.2mm x 3.5tø 48.6mm x 1.5t - 89.1mm x 4.5tø 63.5mm x 2.0t - 114.3mm x 5.2tø 101.6mm x 2.0t - 165.2mm x 6.6tø 114.3mm x 2.5t - 219.1mm x 8.2t

Speed

30m - 100m/min

30m - 60m/min25m - 50m/min20m - 40m/min15m - 30m/min

Hp20HP x 230HP x 250HP x 2

75HP x 2

100HP x 2

125HP x 2

STANDARD FEATURES:. Advance hydraulic and electrical control systems.. Standard tool libraries with two-axis (x, y) system flange angle or ram depth programming.. Programming mode for quick bends with corresponding screen icons.. Automatic calculations of blank length of products.

STANDARD FEATURES:. With the roller guides to minimize friction.. Easy adjustment of blade clearance using the hand wheel.. The movement of the cutting beam on the rollers is slightly offset towards the back so as to ensure high cutting quality. . The control panel provides the following: - Adjustment for rake angle. - Adjustment for the travel of motorized back gauge - Shearing in sections and other performances. Hydraulic system: - Compact and simple to maintain. - Piping & fittings are minimized by the unique mono-block design. . Plate holders: - Synchronized with cutting beam movement, - Pressure of clamping automatically adjusted for greater accuracy.. Shadow cutting line lighting makes it easier to work.

CNC-HYDRAULIC PRESS BRAKE

HYDRAULIC GUILLOTINE SHEAR

COLD ROLL-FORMING PRODUCTION LINE

HOOK ELECTRIC WIRE ROPE HOIST

Piling Dvice

Hoisting MotorHigh-resistance diecasting motor combines with low starting current and high starting torque.

Disc BrakeBuilt-in long-life disc brake.

Wire Ropelong-life filler rope used.

Hook BlockThe sheave diameter is larger than the drum diameter to ensure longer wire rope life, The sheave is made of ductile cast iron for higher abrasion resistance. Of course, the hook block is entirely covered.

Hook The hook is fitted with a latch to keep slings from slipping off.

Limits Switch2-step limit switch:Step 1 breaks the operation circuit.Step 2 breaks the main power circuit

Control BoxQuick-open latched cover and laid out for easy detecting and maintenance.

2-step reducing mechanism gears are built in as single unit for easier overhaul and assemble together with inspection hole for monitor the oil level.

Trolley WheelAuto horizontal balancing for axle

Push Button SwitchEasy to operate and designed with low control voltage for safety.With main line ON / OFF

Pinch RollConveyor Uncoiler

Roll Forming Machine

Control Panel

Cut-To-Length Machine

Planetary gear in oil bath

ｒ2

A

t

ｒ1 ｒ2

90°

B/2

A/2

B

t A

t

ｒ1 ｒ2

B/2

A/2

B

t

ｒ1

H

t2

ｒ2

t 1

95°

B-t 12

B-t 12

H/2

B

ｒｒ1t2

t 2

t 2t 1

t 2

t1 A A

ｒ

B

B

SHEET, PLATE & COIL;

Galvanized Steel Plain Coil Electro Galvanized Steel Coil Cold Rolled Steel Coil Hot Rolled Steel Coil Prepainted Galvanized Steel Coil Mild Steel Wire Rod

ANGLE

■EQUAL TYPE ■H BEAMS■UNEQUAL TYPE ■ I BEAMS

CHANNEL WIDE FLANGE SHAPE

■ STAINLESS STEEL PRODUCTS

■ BRASS/COPPER PRODUCTS

Brass/Copper SheetBrass Round BarBrass Hexagonal BarBrass Square BarCopper Bus BarCopper Round BarCopper Square Bar

S.S. Flat Bar, Japan origin SUS304, 1/4H SIZE : MM

HR/CR Coil/Sheet/Plante

Round Bar

Hex Bar

FinishNO.12BHL/NO.3/NO.4BA

Grade304, 304L, 316L304, 304L, 430, 316L304, 304L, 430, 316L304, 430

2X52X62X72X82X9

2X102X112X122X132X142X152X162X172X182X192X202X212X222X232X242X252X262X272X282X292X302X312X32

3X53X63X73X83X9

3X103X113X123X133X143X153X163X173X183X193X203X213X223X233X243X25

4X54X64X74X84X9


5X55X65X75X85X9


6X66X76X86X9

6X106X116X126X136X146X156X166X176X186X196X20

7X77X87X9

7X107X117X127X137X147X157X167X177X18

8X88X9

8X108X118X128X138X148X158X16

9X99X109X119X129X139X14

10X1010X1110X1210X1310X14

AX SERIES ROBOTS Total Solutions from the Single Source Provider

TEACH PENDANTUser-Friendly Teach Pendant Provides Full Control for High Productivity and Optimal Welding Performance

Multi-Window Display FunctionMulti-window display function allowing display of information on up to four windows

High-resolution large color display640 x 480 dot VGA TFT LCD display

Function Keys for Simple OperationAssign frequently used instructions from simple icon instruction.

Improved Operability via Dedicated KeysTeaching time reduced by dedicated keys, including P, L, C, AS, WS, Input and Output

Visual Operation Intuitive menu with icons employed

3-position Dead Man Switch

Reduced Number of Operations Features like our Dedicated Keys, Seam Coordinate System, and Speed Collective Conversion reduce the overall number of key strokes required to program.

HIGH QUALITY MAG/CO2 WELDING• Virtually Spatter Free-High Speed Welding.Arc voltage tolerance and arc stability are drastically improved when using mixed shielding gases or 100% CO2.• Optional AC Servo Wire Feed SystemBy using an AC servo pull type wire feeder/torch, wire feed ability is improved during high speed welding.• Optional RS (Retract Start) ControlImproves instantaneous arc start ratio and bead profile at the arc start point.

HIGH QUALITY PLASMA CUTTING• High Speed Heavy Duty Capacity- Zips through thin & medium gauge material at incredible speeds.- High quality cuts up to 2 inch thick materials • Maximum Duty CycleThe plasma cutting torch for the D-12000 is water cooled and offers 100% duty cycle.• Built-in Torch Guard FunctionAlarm indicates replacement time of tip and electrode.

CO2/Welding Machine, pushing Higher Quality and Efficiency• DM350 rated 350A, 60% duty cycle• DM500 rated 500A, 80% duty cycle / 4700A, 100% duty cycle• 30 program memory• Digital CAN buss interface with OTC-DAIHEN robots• Smaller & lighter 80kHz IGBT digital inverter• Single & three phase automatic voltage selection• High speed digital reactor drastically reduces spatter• Cooling fan: High, Low and Off• Industrial HMI (Key pad) operational panel• Synergic or individual control of voltage current (wire feed speed)• Combination of digital start and digital burn-back control function improves arc starting• Large 7 segment digital LED numeric display• Simple push buttons for JOB storage/call-up and process programming• Function key for advance programming• Consistent arc length despite changes in wire extension• Tool-free dinse twist lock connectors for secondary output

Digital Inverter Welding Machine D SERIESTRUE DIGITAL SUPPORT FOR PULSE TIG APPLICATIONSFeature and Benefits:• Improved arc concentration improves overall welding capabilities from fillet welds to thin plate materials.• Several different welding modes (Al, Steel, SS) that improved weld

SUPER PLASMA D-12000Transistor Controlled Super Plasma Cutting Machine

Feature and Benefits:• Production cut up to 2 inch• Maximum cut up to 2-1/2 inch• Water cooled – 100% duty cycle• Built in water circulator extends torch and consumable life• Faster, safer and, more economical the oxy-fuel on 1” carbon steel• Superior gouging capabilities• I/O receptacle for automated cutting• Built-in torch guard function (Alarm indicates replacement time of tip and electrode)• Wide operation area (Up to 100ft. torch option)• Advance safety protection circuits• Fully variable output• Cruise control• Pulsed pilot arc start reduces electrode wear• Diagnostic indications for troubleshooting• Wheels for greater maneuverability

■ GROOVING TOOLS

LIGHT GROOVE 150DX

■ PIPE THREADING MACHINES

Essentials for the professional who needs operability, safety and efficiency at the work site.

Standard Model:2"~6"Motor:Series 700W(110 or 220V)

For High Quality Grooving.Grooves 1" to 12" schedule 10 steel and 1" to 8" schedule 40 steel pipes.(stantard model 2" 6" roller set)

Automatic PumpThe electric powered pump was developed specifically for this machine to make accurate grooving easier.

Indicator LampThe indicator lamp automatically lights up when grooving is complete, so that even a novice can be sure of achieving the correct groove depth.

Self Centring HeadThe head adjusts up to an amazing 8° to ensure a perfectly centred groove every time.

NS25A

N100A

NP50AV1

150A

S80A

REX Pipe Machine Series

■ AUTOMATIC WIRE HANGER MAKING MACHINE ■ AUTOMATIC DOUBLE SPIRAL CHAIN LINK FENCING MACHINE

■ GABIONS HEAVY DUTY HEXAGONAL WIRE NETTING MACHINES

A particular advantage of this machine is the use of an electrical clutch in the wire feed mechanism. Then sensor enables precise control of wire length. An electrical counter measures the proudction output and sounds a buzzer when the preset quantity is reached.

THE ADVANTAGE OF SERVO MOTOR CONTROLShin-Ei Tec's servo motor system sets a new standard in fencing making efficiency. Servo motor control means you can freely set the RPM of the spiral weaving blade and stop it at any desired position. Wear is also reduced, most maintenance eliminated, and operation greatly simplified. The result is a 15 percent boost in fence making productivity from an amazingly easy to operate machine.

SHIN-EI Automatic Wire Hanger Making Machine Model SH-1 SHIN-EI Automatic Double Spiral Chainlink Fencing Machine Model SM-4

■ HIGH SPEED BARBED WIRE MACHINE, MODEL TSB-7Super high speed, Rigidly built and equipped, Speed control by inverter

FEATURES · Forming speed and winding speed are automatically fixd by setting number of wire twist on Touch-Panel. · Winding speed can be adjusted higher or lower with a dial and forming speed can be adjusted higher or lower automatically according to winding speed. · Barb pitch is adjustable between 2.5" and 6.0"

We have been supplying various types of materials of welding at competitive price with best quality.

■ WELDING ELECTRODES

NICHIA

■ WIRE DRAWING MACHINEStandard Type - Accumulative Block Unit System and Coilers (Dead Block Type, Non-Stop Type)

Straight LineWith Dancer Equipment/Mini-Dancer Type is Available.

Skip Feed TypeFor adjusting the coil diameter.

Mono Block Type,Gravity Type Wire Drawing Machine /Auto chucking system is available.

Horizontal Type

1.

2.

3.

4. •

•

SPECIFICATION Wire diameter No. of tensile strength No. of cord wire No. of barb point Barb spacing Rev. of bobbin cradle Rev. of crankshaft No. of barbs per min. Take-up coil weight Drive motor Brake Air requirements Machine dimension Machine weight

: 1.5 - 2.8mm: 350 - 500N/mm2: 2 : 2 or 4: 65 - 150mm(2.1/2 - 6"): 640rpm max.: 460rpm max.: 460rpm max.: 45kg max.: 7.5kw 4p with inverter for winding section 2.2kw 4p with inverter for forming section: Pneumatic disc brake: 1.0N. Lit/min. at 4.0kg/cm2: 1.3(W) x 2.5(L) x 1.7(H) m: about 3,400kg (7,500lb)

■ PORTABLE MAGNETIC BASE AUTOMATIC DRILLING MACHINE

Built-in motion sensorIf any lateral movement or excess vibration is detected, both the drill and the feed motor stop instantly. NITTO KOHKI is the first company to incorporate this feature into magnetic base drills.

Fail-safe restartThe drill will not re-start even if power is re-supplied after accidental shutdown. Drilling can only be continued after turning on the drill switch.

Magnet open-circuit sensorThe drill will not start until the magnetic field is active.

One-touch cutter replacementReplacement is quick and easy with our unique push fit self-centering cutter system.

Coolant into the heart of the cutCoolant is fed directly to the inside of the cut. The coolant system also features an auto shut-off.

Mounting the cutter Removing the cutter

■ PORTABLE DOUBLE-ACTING HYDRAULIC PUNCHER

SKC■ TAPS DIES & ACCESSORIES

SELFER ACEModel : HS06-1322Max. Punching Thickness: 13mmMax. Punching Diameter: 22mmMax. Output: 367kN(37tf)



Excellent quality Taps, Dies & Accessories makes drilling and cutting works easy and simple.Hand Taps, Sewing Machine Taps, Pipe Taps, Interrupted Taper Pipe Taps, Taper Pipe Reamer, Combined Taps and Drills, Spiral Drill Taps, Hand Taps Special Series, British Standard Brass, British Standard Conduit, Metric Conduit, Machine Nut Taps, Spiral Fluted Taps, Burring Reamers, Taper Reamer, Hand Taps BA., Combined Ripe Taps and Drills, Pulley Taps, Long Taper Pipe Taps, and more.

■ HAND TRUCK

■ WAGON

■ WORKTAINER

NF-314

NF-301(Folding Type)

NF-315 NF-327 NB-104

NG-407-8 PB-105B-L PF-315B-P

"PRESTAR" HAND TRUCK SERIES"PRESTAR" Hand Truck series are manufactured by means of an integrated automated press system in the modernized facilities.

POLY BUTADIENE RUBBER used for the casters is ideal for the light loads.

ACRYLIC RESIN Paint has the following features;•Rustproofness•Hardness•Keeping color & luster over long period•Adhesion•Rear side of the deck which rusts easily is first treated with epoxy-primer and then finished with ACRYLIC RESIN Paint for better antirustproofing.

■ HAND PALLET TRUCKS

Blue Label -Pallet Trucks Provide-

Specifications

Optional Features

Valuable Features Standard Features

Bogie WheelsBogie wheels are standard with model BM30

Parking Brake WheelsNylon wheels-available with Model BM20 & 25(Except Low Profile model)Aluminum hub steer wheels and steel hub fork(load) wheels are available an option.　　　　

BM-20SSBM-20SBM-20MBM-20LBM-20CBM-20LLBM-20-46SSBM-20-46SBM-20-60MBM-20-60LBM-25SSBM-25SBM-25MBM-25LBM-25CBM-25BM-25LLBM-15SS-LBM-15M-LBM-15LL-LBM-25M-LBM-25LL-LBM-30MBM-30LLBM-15SS-L50BM-15M-L50BM-15LL-L50BM10SS-L40BM10S-L40BM10M-L40BM10C-L40BMSH15SSBMSH15MBMSH15LLBMSH15SS-LBMSH15M-LBMSH15LL-L

A

B

C

D

E

F

G

H

Model Model No.Capacity

(Kgs.)

2,0002,0002,0002,0002,0002,0002,0002,0002,0002,0002,5002,5002,5002,5002,5002,5002,5001,5001,5001,5002,5002,5003,0003,0001,2001,2001,2001,0001,0001,0001,0001,5001,5001,5001,5001,5001,500

mm520520520520685685460460600600520520520520685685685520520685520685520685520520685520520520685520520685520520685

mm214214214214379379154154294294214214214214379379379214214379214379214379214214379214214214379214214379214214379

mm8109801,0701,1501,0701,2208109801,0701,1508109801,0701,1501,0701,1501,2208101,0701,2201,0701,2201,0701,2208101,0701,2208109801,0701,0708101,0701,2208101,0701,220

mm80808080808080808080808080808080806565656565838350505040404040808080656565

mm200200200200200200200200200200200200200200200200200165165165165165203203140140140115115115115200200200165165165

WheelMaterial

V/V(N/N)V/V(N/N)V/V(N/N)V/V(N/N)V/V(N/N)V/V(N/N)V/V(N/N)V/V(N/N)V/V(N/N)V/V(N/N)V/V(N/N)V/V(N/N)V/V(N/N)V/V(N/N)V/V(N/N)V/V(N/N)V/V(N/N)

V/SV/SV/SV/SV/S

V/V(BogieWheels)

V/SV/SV/SV/NV/NV/NV/NN/NN/NN/NN/NN/NN/N

Weight(Kgs.)

72757981858870748285868889909798996875838595

10511068758364677171727988687583

inch(20 1/2")(20 1/2")(20 1/2")(20 1/2")

(27")(27")

(18 1/8")(18 1/8")(23 5/5")(23 5/5")(20 1/2")(20 1/2")(20 1/2")(20 1/2")

(27")(27")(27")

(20 1/2")(20 1/2")

(27")(20 1/2")

(27")(20 1/2")

(27")(20 1/2")(20 1/2")

(27")(20 1/2")(20 1/2")(20 1/2")

(27")(20 1/2")(20 1/2")

(27")(20 1/2")(20 1/2")

(27")

inch(8 1/2")(8 1/2")(8 1/2")(8 1/2")

(15")(15")(6")(6")

(11 1/2")(11 1/2")(8 1/2")(8 1/2")(8 1/2")(8 1/2")

(15")(15")(15")

(8 1/2")(8 1/2")

(15")(8 1/2")

(15")(8 1/2")

(15")(8 1/2")(8 1/2")

(15")(8 1/2")(8 1/2")(8 1/2")

(15")(8 1/2")(8 1/2")

(15")(8 1/2")(8 1/2")

(15")

inch(32")(42")(48")

(45 1/4")(42")(48")(32")

(38 1/2")(42")

(45 1/4")(32")

(38 1/2")(42")

(45 1/4")(42")

(45 1/4")(48")(32")(42")(48")(42")(48")(42")(48")(32")(42")(48")(32")

(38 1/2")(42")(42")(32")(42")(48")(32")(42")(48")

inch(3 1/8")(3 1/8")(3 1/8")(3 1/8")(3 1/8")(3 1/8")(3 1/8")(3 1/8")(3 1/8")(3 1/8")(3 1/8")(3 1/8")(3 1/8")(3 1/8")(3 1/8")(3 1/8")(3 1/8")(2 1/2")(2 1/2")(2 1/2")(2 1/2")(2 1/2")(3 1/4")(3 1/4")

(2")(2")(2")

(1 9/16")(1 9/16")(1 9/16")(1 9/16")(3 1/8")(3 1/8")(3 1/8")(2 1/2")(2 1/2")(2 1/2")

inch(7 7/8")(7 7/8")(7 7/8")(7 7/8")(7 7/8")(7 7/8")(7 7/8")(7 7/8")(7 7/8")(7 7/8")(7 7/8")(7 7/8")(7 7/8")(7 7/8")(7 7/8")(7 7/8")(7 7/8")(6 1/2")(6 1/2")(6 1/2")(6 1/2")(6 1/2")

(8")(8")

(5 1/2")(5 1/2")(5 1/2")(4 1/2")(4 1/2")(4 1/2")(4 1/2")(7 7/8")(7 7/8")(7 7/8")(6 1/2")(6 1/2")(6 1/2")

A1 A2 B D1 D2Fork Dimension

Comfortable Molded Grip HandleMolded handle design provides comfort and a strong grip

3 Position Fingertip Control3 position Control Lever provides easy fingertip control of complete hydraulic system

Polyurethane Wheels Rugged Polyurethane Wheels are standard

Lead Free Paint Bishamon pallet trucks are painted with environmentally friendly lead free paint.

A Standard ModelB Special Width ModelC Standard ModelD Standard Low Profile ModelE 3 Ton Capacity ModelF 50 mm Low Profile ModelG 40 mm Super Low Profile ModelH Stainless Model

2,000 Kgs. Capacity2,000 Kgs. Capacity2,500 Kgs. Capacity1,500 & 2,500 Kgs. Capacity3,000 Kgs. Capacity1,200 Kgs. Capacity1,000 Kgs. Capacity1,500 Kgs. Capacity

Fork M/M HeightFork M/M HeightFork M/M HeightFork M/M HeightFork M/M HeightFork M/M HeightFork M/M HeightFork M/M Height

80 mm80 mm80 mm65 mm83 mm50 mm40 mm80(65) mm

*Wheel Material·······(Steering Wheel/Fork Wheel) Specifications are subject to change without notice. V=Polyurethane, N=Nylon, S=Steel

Sophisticated design and an extensive product line produce and enhance the elegance of your house.EXTERIOR BUILDING MATERIALS

Moen LegendallHigh-grade exterior sidings, expressing a massive and solid image of stones with a sophisticated embossing technique.

Moen ArtHigh-grade interior/exterior building materials that mimics the natural forms of nature in every detail.

Moen ExcelardHigh-grade exterior sidings that mirrors and enhances the textures of natural stone.

Moen Siding SA heavyweight extrudend exterior sidings that is well suited for use on steel structures in residential and commercial applications.

Premium StageHigh-grade exterior building materials that have easiness of installation as well as endurance and excellent quality of tile.

MicroGuard

Next-generation ink jet

ultra hydrophilic stainproofing

process based on nano-

technology

The pattem data is converted

into digital data by computer

processing and printed using

red, blue, yellow and black inks,

which reproduce innovative and

delicate changes of color.

Moen Siding-M/Moen Siding WAvailabe in a wide selection of colorful designs, these fire proof exterior sidings are designed specifically for use in wood frame construction.

Moen NextageNew panorama joints for high-grade exterior sidings also minimize the visibility of seams in workmanship.

■ Exterior sidings

As a leading manufacturer of fider reinforced cement sidings, Nichiha offers an extensive product line that includes Moen Siding-M, an extremely durable siding, as well as Moen Excelard, which is available in realistic textures.

SUMINOE CARPET TILE(CAESAR)

MOEN SIDING S

CR-701

CR-718

CR-715

CR-710

CR-702

CR-719

CR-716

CR-711

CR-706

CR-720

CR-707

CR-705

CompositionPile heightGaugeTotal thicknessSizeTotal weightBackingFlammabilitySoil-proof

Anti-static

Color fastness

Abrasion durabilityInstallationPackege

Caesar CR-700100% Polypropylene (Solution Dyed)3mm (Level loop)1/10"6.0mm50cm×50cm4.1kg/m2

Special PVCGovernment approval No.EO970268Polypropylene (Solution dyed)JIS L-1023-1992-1023℃ 25%RH below 1,000V(synthetic leather sole)

Abrasion resistance (JIS L-0849(DRY)) Grade 4 or aboveLight fastness (JIS L-0842) Grade 4 or above

(JIS L-1023-1992-9 1,000 times) 0.1g or lessMainly direct installation20 pieces in a case

MARBLE

PRIME TILE TEST REPORT

PLT-1723

PLT-1717

PLT-1722

PLT-1724

PLT-1706

PLT-1701

PLT-1721

PLT-1702

PLT-1714 PLT-1718 PLT-1719 PLT-1720

PLT-1715

PLT-1716 PLT-1723, 1724

APPEARANCE

THICKNESS

LENGTH

WIDTH

VERTICALITY

RESIDUAL INDENTATION

HEATING LOSS

LENGTH CHANGE by

HEATING

INDENTATION

CHEMICAL

RESISTANCE

LENGTH CHANGE by

WATER ABSORPTION

SCRATCHING TEST

T.D

M.D

20℃

45℃

SOYBEAN OIL

LUBRICANT

95% ETHYLALCOHOL

10% AMMONIUM HYDROXIDE

MILK

5% ACETIC ACID

5% HYDROCHLORIC ACID

KEROSENE

SOY SAUCE

CEMENT PASTE

T.D

M.D

95% ETHANOL

2%SODIUM HYDROXIDE

SOYBEAN OIL

KEROSENE

UNIT

-

mm

mm

mm

mm

%

wt%

%

%

mm

mm

-

-

-

-

-

-

-

-

-

-

%

%

mm

mm

mm

mm

SPECIFICATION

NO DIFECTS

3.0 0.15

457.2 0.45

457.2 0.45

0.25↓8.0↓0.5↓0.25↓0.25↓0.25↑1.20↓

NO DEFECTS

-

-

3.1↓3.1↓3.1↓3.1↓

RESULTS

NO DEFECTS

3.04

457.2

457.1

0.11

3.2

0.1

0.02

0.03

0.43

0.6

NO DEFECTS

0.01

0.06

1.8

1.7

1.6

2.5

SQUARETEST ITEM

PLANKSPECIFICATION

NO DEFECTS

3.0 0.15

914.4 0.9

100 1.10

0.25↓8.0↓0.5↓0.25↓0.25↓0.25↑1.20↓

NO DEFECTS

-

-

3.1↓3.1↓3.1↓3.1↓

RESULTS

NO DEFECTS

2.98

914.9

100.03

0.11

3.1

0.1

0.07

0.08

0.39

0.6

NO DEFECTS

0.03

0.04

1.7

1.8

1.7

2.5

TEST METHOD KSM3802-2003

Dimension : 457.2mm x 457.2mmThickness : 3.0mmPackage : 16Pcs/Box(3.34m2)

± ±± ±± ±

■MINERAL FIBER CEILING BOARD

■ HONEY COMB FILTER, JAPAN ORIGIN FOR AIR CONDITIONER

Type : Normal type, Anti Bacteria type, Photocataly type Color : White, Black Size : 300 mm x 100 mtr : 350 mm x 100 mtr : 410 mm x 100 mtr : 460 mm x 100 mtr : 1,250 mm x 100 mtr (Mother roll) * Other sizes can be checked up with maker upon receipt of your firm requirement. Mesh size : 34 x 33 mesh, 39 x 39 mesh

SIZE : 12 mmt x 603mm x 603 PATTERN : FISSURED TYPE

200t/day production plant operating in saudi arabia

Documents