2009 esss south american ansys users...
TRANSCRIPT
2009 ESSS South American ANSYS Users ConferenceCostão do Santinho Resort - Florianópolis, SC - Brazil10-13 November 2009
PROGRAM
®Sponsors:
Imag
e: C
ourte
sy_N
AVAT
EK_L
TD
accelera�ngresultsTM
®
2009 ESSS South American ANSYS Users Conference
uu WELCOME
10-13 NOVEMBER - FLORIANÓPOLIS, SC/BRAZIL
• Walter Rauen de SouzaPresident Ciber Equipamentos Rodoviários Ltda.
• Donizete C. SantosPresident SKF do Brasil
• Luiz Carlos Largura Jr.
Equipment Engineer CENPES/PETROBRAS
• Arnaldo CamarãoProduct Development Manager ArvinMeritor
• Miguel Mattar Neto Research and Technology Deputy Manager IPEN-CNEN/SP
• Fernando TosteEquipments Engineering Coordinator Technip
• Paul Galpin Chief Technologist, Fluid Systems ANSYS, Inc.
• Markus KoppSenior Application Specialist HF Products ANSYS, Inc.
• Nader Fateh VP Business Development ESTECO NA
• Sriram RamanathanSales Manager, Americas DEM Solutions
• Martin FaberSales Manager CEI
uu KEYNOTE SPEAKERS
Inte
rnat
iona
l Spe
aker
s
Tech
nica
l Spe
aker
sM
anag
emen
t Tr
acks
Smart Engineering Simulation
Simulation Driven Product Development is increasingly present in the daily life of engineers, designers and researchers. Based on reliable methods of mathematical modeling, ANSYS technologies help these professionals to improve products, optimize processes and reduce development cycles and costs.
The most traditional forum for the
exchange of ideas about Structural Analysis (FEA) and Computational Fluid Dynamics (CFD) in South America will include this year the benefits of using Ansoft tools for Electronic Design Automation (EDA).
At this conference you will discover how innovative companies, universities and R&D centers have been using simulation to improve their engineering designs resulting in better products and processes.
2009 ESSS South American ANSYS Users Conference
uu CONfERENCE AT-A-gLANCE
uu NOVEMBER 10
7:30 Registration Open
8:30 ADVANCED TRAiNiNG
10:00 REFRESHMENTS iN EXHiBiTiON AREA
10:20 ADVANCED TRAiNiNG
12:00 LUNCH
13:30 ADVANCED TRAiNiNG
15:30 REFRESHMENTS iN EXHiBiTiON AREA
15:50 ADVANCED TRAiNiNG
18:00 END OF 1ST DAY
uu NOVEMBER 11
8:00 ADVANCED TRAiNiNG
9:50 REFRESHMENTS iN EXHiBiTiON AREA
10:00 PLENARY SESSiON
12:10 LUNCH
13:30 PLENARY SESSiON
15:30 REFRESHMENTS iN EXHiBiTiON AREA
16:00 TECHNiCAL SESSiONS
18:00 END OF 2ND DAY
uu NOVEMBER 12
8:00 ADVANCED TRAiNiNG TECHNiCAL TOPiCS
9:50 REFRESHMENTS iN EXHiBiTiON AREA
10:20 PLENARY SESSiON
12:10 LUNCH
13:30 PLENARY SESSiON
15:30 REFRESHMENTS iN EXHiBiTiON AREA
16:00 TECHNiCAL SESSiONS
18:00 END OF 3RD DAY
uu NOVEMBER 13
8:00 TECHNiCAL TOPiCS
9:50 REFRESHMENTS iN EXHiBiTiON AREA
10:20 TECHNiCAL SESSiONS
12:10 CLOSiNG LUNCH
The Full System EMi/EMC Methodology using Ansoft Tools
A student will learn which tools are needed to perform EMI/EMC analysis, and what part they play in the methodology. Additionally, a student will gain knowledge in how to properly create the necessary simulations and how to incorporate multiple simulation results into a final full system simulation.To accomplish the above, a student will obtain a basic understanding of how to create and solve simulations in SIwave, Ansoft Designer and HFSS. Additionally a student will gain knowledge of how to dynamically link different simulation together and how to use the “push excitations” function in Ansoft Designer.
Specifically, a student will learn how: to import a board file, setup, and solve an SIwave model; to dynamically link an SIwave model to Ansoft Designer, apply time based excitations to the linked model, and use the push excitation feature; to create an EMI plot in SIwave; to import a board housing and/or create an HFSS model and what the various excitations and boundaries are; to link data from SIwave into HFSS; to create an EMI plot in HFSS.
Instructor: Markus Kopp, ANSYS, Inc. Date: November 10Fee: R$ 950,00 (30% off for academic students)
Optimization Techniques using modeFRONTiER
This training is recommended for engineers and analysts (both numerical and experimental) interested in learning the fundamental concepts of optimization techniques applied to engineering projects. Topics to be covered during this course include: introductory concepts such as design of experiments (DOE), sensitivity analyses; advanced techniques such as multi-objective optimization algorithms, Robust Design, and meta-modeling. Practical examples are used to illustrate the different course topics, as well as the coupling between modeFRONTIER and other well-known CAE tools.
Instructor: Ana Paula Curty Cuco, ESSSDate: November 10Fee: R$ 950,00 (30% off for academic students)
Using EDEM for Discrete Element Modeling
EDEM is the world’s first general-purpose CAE tool to use state-of-the-art discrete element modeling technology for the simulation and analysis of particle handling and manufacturing operations. EDEM has a user-friendly GUI including a portfolio of tools for model set up, solver control and analysis of results. Complex models involving irregular particles and complex equipment geometry can be implemented without any programming required. A fully customizable API enables coupling with external models and ANSYS tools.
Topics: • DEM (Discrete Element Modeling) • Creating and importing geometries • Setup, solver, post-processing and basic simulation • Contact models, adhesion, cohesion and body forces • Import particle templates and moving plane models • Using API to write, build, and include a new contact model
Instructor: Daniel Nasato, ESSS Date: November 10Fee: Free Registration - (Limited Availability).
ANSYS CFD - Turbomachinery Flow Modeling
Focuses on the understanding of the phenomena associated with the turbomachinery flow modeling and the appropriated use of these resources in the ANSYS CFX software.
Instructor: Bruno Contessi, ESSS Date: November 10 - 11Fee: R$ 1.200,00 (30% off for academic students)
ANSYS Mechanical - Advanced Contact and Fasteners
This course is recommended for engineers who want to use ANSYS to perform analysis on contact models that cannot be readily solved using default settings. Advanced Contact and Fasteners covers themes from contact stiffness and friction to surface-to-surface, node-to-node and bolt pretension elements on ANSYS Classic and Workbench platforms.
Instructor: Luiz Lima, ESSS Date: November 10 to 12Fee: R$ 1.450,00 (30% off for academic students)
ANSYS APDL Programming - integrating Workbench and Classic
This course is designed to professionals who want to use the ANSYS advanced resources on the Workbench platform through APDL Programming (ANSYS Parametric Design Language).
Instructor: Giovanni Teixeira, ESSS Schedule: November 10 to 12Fee: R$ 1.450,00 (30% off for academic students)
ANSYS Mechanical Workbench - Rotordynamics
• Coriolis Effect and Reference Systems • Stationary reference system (Modal Analysis, Harmonic
Analysis, Synchronous Force, Asynchronous Force, Campbell Diagram, Whirl Orbit, Transient Analysis)
• Rotatory Reference System (Modal Analysis, Harmonic Analysis)
• Bearing
Instructor: Fabiano Nunes Diesel, ESSS Date: November 10 to 12Fee: R$ 1.450,00 (30% off for academic students)
Electromagnetic Analysis of Electromechanical Products using Maxwell
Maxwell is the leading electromagnetic field simulation software used for the design and analysis of 3D/2D structures, such as motors, actuators, transformers and other electric and electromechanical devices common to automotive, military/aerospace, and industrial systems. Based on the Finite Element Method (FEM), Maxwell accurately solves static, frequency-domain and time-varying electromagnetic and electric fields.
Instructor: Mateus Bonadiman, ESSS Date: November 10 to 12Fee: R$ 1.450,00 (30% off for academic students)
uu ADVANCED TRAiNiNG - NOVEMBER 10 - 12
2009 ESSS South American ANSYS Users Conference
2009 ESSS South American ANSYS Users Conference
uu TEChNiCAL SESSiONS - NOVEMBER 11 - 13
uu TEChNiCAL TOPiCS - NOVEMBER 12 - 13
Users will present how they have applied ANSYS software to reduce development cycles, improve processes and obtain lower costs in following fields:
ANSYS MechANicAl ii
ANSYS FlUeNt ANSYS cFX electroNicS optiMizAtioN DiScrete eleMeNt MoDeliNg
8:00 Solving large Deflection problems using ANSYS explict Strivan Thesi
ANSYS Workbench 12 for Fluent UsersVictor Souza
ANSYS cFX Solver ManagerHenrique Monteiro
Using hFFS to Design AntennasMateus Bonadiman
An introduction to Design optimization with modeFroNtierAna Paula Cuco
chute transfer Simulation Using eDeMDaniel Nasato
8:25 introducing the New Workbench / lS-DYNA interface for pre-processing of explicit Dynamics Analysisivan Thesi
parametric Analysis in ANSYS FluentArmando Souza
Using Multi-configuration in ANSYS cFX-preBruno Contessi
Designing electric Motors using rMxprt and MaxwellLeandro Percebon
Design optimization using experimental Data and response SurfacesAna Paula Cuco
chute transfer Simulation - cohesive MaterialDaniel Nasato
8:50 reducing Analysis time with ANSYS rigid DynamicsFabiano Diesel
FSi 1 way Fluent - ANSYS WorkbenchVictor Souza
Basic Scripting in ANSYS cFXHenrique Monteiro
eMc/eMi Design Using ANSoFt toolsMarkus Kopp
Solving engineering inverse problems with modeFroNtierAna Paula Cuco
eDeM-ANSYS couplingDaniel Nasato
9:15 Best practices on Modeling contact problemsLuiz Lima
poliedric Meshes (comparison in cFD-post)Armando Souza
FSi - 6 DoF with ANSYS cFXBruno Contessi
Using the Multiphysics Approach to Design electronic DevicesSilvia Firmino
coupling Multiple cAe tools in a Single optimization StudyAna Paula Cuco
eDeM-cFD couplingDaniel Nasato
pre AND poSt proceSSiNg ANSYS MechANicAl i
8:00 cAD integration and Defeaturing Nicolino Foschini
ANSYS Modeling tools: A Better Way to improve your Structural AnalysisFernando Amaral
8:25 hybrid Meshing using ANSYS MeshingHenrique Monteiro
parametrization and optimization on Workbench 2: Working with DesignXplorerMaurício Pacheco
8:50 ANSYS iceM MultizoneBruno Contessi
considering Friction heating effects on a coupled thermo-Structural AnalysisDaniel Boeri
9:15 ANSYS cFD-postBruno Contessi
parallel processing for FeA UsersRoberto Silva
• oil & gas• Marine & offshore• industrial equipments• civil engineering
• electronics• Appliances• Aerospace• Automotive
• power generation• optimization• Biotechnology
the technical topics provide an inside look at the latest simulation technology and how this technology can be applied to help ensure success. these 25 minutes presentations are offered multiple times during the last two mornings of the conference to offer you flexibility in scheduling your time.
uu NOVEMBER 12
uu NOVEMBER 13
TECHNiCAL TOPiCS
TECHNiCAL TOPiCS
2009 ESSS South American ANSYS Users Conference
uu NOVEMBER 10 - PRE-CONFERENCE TRAiNiNG
room Faial Corvo Flores i Flores ii GraCiosa santa maria Cruzeiro do sul i Cruzeiro do sul ii
eMi/eMc Analysis Methodology using Ansoft tools
ANSYS Mechanical Workbench - rotordynamics
electromagnetic Analysis of electromechanical products using Maxwell
ANSYS cFD - turbomachinery Flow Modeling
ANSYS Mechanical - Advanced contact and Fasteners
ANSYS ApDl programming - integrating Workbench and classic
Using eDeM for Discrete element Modeling
optimization techniques using modeFroNtier
7:30 REGiSTRATiON OPEN
8:30 ADVANCED TRAiNiNG
room Faial Corvo Flores i Flores ii GraCiosa santa maria Cruzeiro do sul i Cruzeiro do sul ii
eMi/eMc Analysis Methodology using Ansoft tools
ANSYS Mechanical Workbench - rotordynamics
electromagnetic Analysis of electromechanical products using Maxwell
ANSYS cFD - turbomachinery Flow Modeling
ANSYS Mechanical - Advanced contact and Fasteners
ANSYS ApDl programming - integrating Workbench and classic
Using eDeM for Discrete element Modeling
optimization techniques using modeFroNtier
room Faial Corvo Flores i Flores ii GraCiosa santa maria Cruzeiro do sul i Cruzeiro do sul ii
eMi/eMc Analysis Methodology using Ansoft tools
ANSYS Mechanical Workbench - rotordynamics
electromagnetic Analysis of electromechanical products using Maxwell
ANSYS cFD - turbomachinery Flow Modeling
ANSYS Mechanical - Advanced contact and Fasteners
ANSYS ApDl programming - integrating Workbench and classic
Using eDeM for Discrete element Modeling
optimization techniques using modeFroNtier
room Faial Corvo Flores i Flores ii GraCiosa santa maria Cruzeiro do sul i Cruzeiro do sul ii
eMi/eMc Analysis Methodology using Ansoft tools
ANSYS Mechanical Workbench - rotordynamics
electromagnetic Analysis of electromechanical products using Maxwell
ANSYS cFD - turbomachinery Flow Modeling
ANSYS Mechanical - Advanced contact and Fasteners
ANSYS ApDl programming - integrating Workbench and classic
Using eDeM for Discrete element Modeling
optimization techniques using modeFroNtier
18:00 END OF 1ST DAY
10:00 REFRESHMENTS iN EXHiBiTiON AREA
10:20 ADVANCED TRAiNiNG
12:00 LUNCH
13:30 ADVANCED TRAiNiNG
15:30 REFRESHMENTS iN EXHiBiTiON AREA
15:50 ADVANCED TRAiNiNG
uu NOVEMBER 11
OiL & GAS i
Carlos Fontes
iNDUSTRiAL EqUiPMENTS iGiovanni teixeira
CiViL i
andrés González
ELECTRONiCS
mateus Bonadiman
APPLiANCES
daniel Boeri
16:00 iMpleMeNtAtioN oF the criticAl velocitY BoUNDArY coNDitioN For pArticle-WAll iNterActioN iN FlUeNt’S DiScrete phASe MoDelJosé A. S. Gonçalves,uFsCar
MoDeliNg teMperAtUre DiStriBUtioN iN FrictioN Stir WelDiNg USiNg the FiNite eleMeNt MethoDMauricio Rangel Pacheco, esss
BreAkoUt NUMericAl SiMUlAtioNMauro Bloch, PetroBras
therMAl NUMericAl SiMUlAtioN iN telecoMMUNicAtioN cABiNetAmarildo Tabone Paschoalini, unesP ilha solteira
pc MoUSe reproJect USiNg qUASiStAtic ANAlYSiS iN cAe toolSSergio Antonio Rosa, instituto superior tupy
16:20 eXperiMeNtAl AND coMpUtAtioNAl MoDeliNg oF gAS liqUiD ANNUlAr FloW iN horizoNtAl tUBeS Lucas de Andrade Kostetzer,esss
NUMericAl MoDeliNg For MechANicAl AND therMAl ANAlYSiS oF reSiDUAl StreSSeS FroM the WelDiNg proceSSThiago Vidal Valente, unB
MechANicAl ApplicAtioNS oF the DrUcker-prAger coNStitUtive lAWJorge Mario Toro Fernandez, imPsa Wind
electroNicS cooliNg ApplicAtioNS With ANSYS icepAk 12.0Silvia Firmino, esss
pArAMeter iDeNtiFicAtioN oF StreSS-StrAiN cUrveS At coNStANt rAte oBtAiNeD FroM AXiAl iMpAct teStS oF pvc AND pp SAMpleSRafael Beck, WeG
16:40 oN the lArge-eDDY SiMUlAtioN: recoMeNDeD prAticeS AND ADvANceD poSt-proceSSiNg Raphael Bacchi,esss
the iMproveMeNt oF preSSUre veSSelS’ DeSigN throUgh FeA With the ANSYS progrAM AND the StreSS evAlUAtioN criteriA oF the ASMe coDeAndré Ricardo Beim, tresca engenharia
loAD teSt MoDeliNg oF lArge poleSPaulo Alexandre de Oliveira, laCteC
DevelopMeNt oF WAter cUt SeNSor For tWo phASe (oil AND WAter) FloW iN pipeliNe BY MicroWAve iN reSoNAtor cAvitYEduardo Scussiato, uFsC
Better viSUAlizAtioN oF helicoiDAl SpriNgS MoDeS BY coorDiNAteS chANgeJulio Cesar da Silva, emBraCo
17:00 teSt cASeS For vAriABle DeNSitY FloW Paulo Santochi Pereira da Silva,Poli usP
eFFect oF StreSS coNceNtrAtioN oN the FAtigUe reSiStANce oF tWo DUAl-phASe SteelSJuliano de Barros Veloso e Lima, uFoP
NUMericAl MoDeliNg oF lABorAtorY teStS With the ANelAStic StrAiN recoverY MethoD For iN-SitU StreSS DeterMiNAtioNMauro Bloch, PetroBras
SiMUlAtioN oF poWertrANSForMerS ANDreActorS USiNgMAXWellAnderson Santos Nunes, WeG
AN iMplicit iMpAct ANAlYSiS ApproAch iN coMpreSSor coMpoNeNtS DeSigNRaul Bosco Junior, emBraCo
17:20 vorteX iDeNtiFicAtioN criteriA oN tUrBUleNt FloWS Raphael Bacchi,esss
USe oF FiNite eleMeNt MethoD iN the StUDY oF Notch eFFect iN the FAtigUe liFe oF plAte Mill´S SpiNDleLuiz Otávio Rocha Peres, usiminas
MoDAl & SeiSMic ANAlYSiS oF A lNg tANkSebastián Miranda, metacontrol ingenieros s.a.
MoDe coNverSioN AND eMi iN A telecoMMUNicAtioNS BlADe SYSteMMarkus Kopp, ansYs/ansoFt
evAlUAtioN oF eFFective FloW AND Force AreAS oF reeD vAlveS USiNg SteADY StAte FlUiD-StrUctUre iNterActioNCelso Kenzo Takemori, emBraCo
17:40 cYcloNe DUSt hopper iNFlUeNce iN the vorteX core Karolline Ropelato,esss
USiNg ANSYS iN the DevelopMeNt oF MilliNg DriveSRafael Rodarte, seW eurodrive
ANAlYticAl-eXperiMeNtAl coMpAriSoN oF NUMericAl DYNAMic reSpoNSe iN preSSUreS oF FlUiD80 eleMeNtAndrés González, esss
ANteNNAS DeSigN iN Big StrUctUreS USiNg hFSSMateus Bonadiman, esss
8:00 ADVANCED TRAiNiNG
18:00 END OF 2ND DAY
room PiCo
10:00 OPENiNG SESSiONClovis Maliska Jr., ESSS
10:20 international Speaker ANSYS CORPORATE UPDADEPaul Galpin, ANSYS, Inc.
11:00 Sponsor Mark ihimoyan, Microsoft
11:20 international Speaker THE MAGiC OF MAXWELL’S EqUATiONSMarkus Kopp, ANSYS, Inc.
12:10 LUNCH
13:30 Management track THE SUCCESS OF SKF BASED ON THE TRiAD TECNOLOGY x PROCESSES x PEOPLEDonizete C. Santos, SKF do Brasil
14:00 technical Speaker THE ENGiNEERiNG KNOWLEDGE MANAGEMENT CHALLENGE iN CAE ANALYSiSArnaldo Camarão, ArvinMeritor
14:30 technical Speaker ANSYS SOFTWARE USAGE iN STRUCTURAL iNTEGRiTY ASSESSMENTLuiz Carlos Largura Jr., PETROBRAS
15:00 international Speaker A MULTiDiSCiPLiNARY APPROACH TO DESiGN OPTiMizATiONNader Fateh, ESTECO NA
15:30 REFRESHMENTS iN EXHiBiTiON AREA
TECHNiCAL SESSiONS
room Corvo Flores i Flores ii GraCiosa santa maria
room GraCiosa santa maria Corvo Faial Flores i
ANSYS Mechanical Workbench - rotordynamics
electromagnetic Analysis of electromechanicalproducts using Maxwell
ANSYS cFD - turbomachinery Flow Modeling
ANSYS Mechanical - Advanced contact andFasteners
ANSYS ApDl programming - integrating Workbenchand classic
9:50 REFRESHMENTS iN EXHiBiTiON AREA
PLENARY SESSiON
Chairman
uu NOVEMBER 12
OiL & GAS ii
João aguirre
MARiNE/OFFSHORE iinicolas spogis
iNDUSTRiAL EqUiPMENTS iiFabiano diesel
CiViL ii/AEROSPACECesareo siqueira
POWER GENERATiON irodrigo tasca
ADVANCED TOOLS
roberto silva
16:00 cFD helpS opeN hole grAvel pAckiNg proJectS iN the oil iNDUStrY João Vicente Martins de Magalhães,PetroBras
NoN-liNeAr SiMUlAtioN oF the UMBilicAl ANchoriNg Device USiNg coheSive zoNe MAteriAl BehAvior For the iNterFAce coNtAct epoXi/Steel tUBeJuliano Lanza Conceição, suBsin
vAlve certiFicAtioN - FABricAtioN & DeSigN ASpectS: A prActicAl eXAMpleCarlos Alexandre de Jesus Miranda, iPen/Conesteel válvulas e Conexões industriais ltda
StAtic MoDeliNg oF A loW poWer WiND tUrBiNeRenato Hunter, universidad de la Frontera
ANAlYSiS oF WiND tUrBiNe BlADe USiNg 3D cFD AND itS coMpAriSoN With BeM MethoDMauro Grioni, imPsa
FrActUre MechANicS evAlUAtioN oF A pipeliNe SectioN USiNg A coMBiNeD ANSYS/zeNcrAck FiNite eleMeNt ANAlYSiS ApproAchMaira Amanda Vargas, esss
16:20 SAND SettliNg ANAlYSiS iN A rAt-hole DUriNg horizoNtAl Well grAvel pAckiNgJairo zago de Souza,esss / PetroBras
DeterMiNAtioN oF StreAM eFFortS iN FloAtiNg UNitS USiNg cFDDaniel Fonseca de Carvalho e Silva, PetroBras
FeM ApplieD to iMprove the ShApe oF SliDe gAte plAte iN orDer to iNcreASe perForMANce iN coNtiNUoUS cAStiNgHerbert A. Dos Santos, magnesita refratarios s.a.
UltiMAte reSiStANce oF i-girDer WeB pANelS SUBJecteD to coMBiNeD BeNDiNg, SheAr AND pAtch loADiNg Asdrúbal Ayestarán, albatros ingeniería
oN the preDictioN oF ADverSe hYDrAUlic pheNoMeNA iN the iNtAke oF lArge-ScAle pUMpS BY cFD SiMUlAtioNSOtávio Souza Pires, Promon engenharia / uFrJ
ANSYS eXplicit Str AND lS-DYNA, overvieW AND ApplicAtioNSivan ivanovitsch Thesi Riagusoff, esss
16:40 evAlUAtioN oF MoMeNtUM trANSFer MoDelS For eUler-eUler MoDeliNg oF coNtiNUoUS-DiSperSe FloWS Lucilla Coelho de Almeida,esss
viScoUS DrAg DeterMiNAtioN oF A Ship MoDel At loW FroUDe NUMBerSHumberto de Carvalho Nakanishi, Poli usP
BeSt prActiceS For DevelopMeNt AND iMproveMeNt oF proJectS USiNg ANSYS tool At cFD AND FeA ANAlYSiSWagner da Silva Mariano, CiWal
MiSSile Nozzle coUpleD-FielD SiMUlAtioNSGuilherme Pinto Guimarães, Centro tecnológico do exército - Ctex
ANAlYSiS oF eNergY coNSUMptioN iN ceNtriFUgAl coMpreSSorS DUe to the MiSAligNMeNt oF iMpeller AND DiFFUSerCarlos Reuther Siqueira, PetroBras
ANAlYSiS oF coMpoSite StrUctUreS USiNg ANSYS 12.0 AND the ANSYS coMpoSiteS prepoSt MoDUle (Acp): AN overvieWJean Paul Kabche, esss
17:00 FlUiD DYNAMic SiMUlAtioN oF A gAS SpArgeD FlotAtioN tANk João Aguirre Oliveira Jr.,esss
A MethoDologY For the eStiMAtioN oF NUMericAl hYDroDYNAMic AND ADDeD MASS coeFFicieNtS USiNg cFD techNiqUeSLucas Froes Cavalcanti, esss
ASSeSSMeNt oF NUMericAl MoDelS to repreSeNt the lAMiNAteD rotor core oF electricAl MAchiNeSHideraldo Luis V. dos Santos, WeG
MoDeliNg AND vAliDAtioN oF the reSpoNSe oF riBBeD pANelS SUBJecteD to StrUctUrAl eXcitAtioN USiNg FeMMario Alejandro González Montenegro, uFsC
trANSitioN proceSS BegiNNiNg oN A loW preSSUre tUrBiNe BlADeRosiane Cristina de Lima, vse
MechANicAl ApDl AND WorkBeNch iNtegrAtioNRoberto Monteiro Basto da Silva, esss
17:20 iMproveMeNt oF AN opticAl oil AND greASe MoNitoriNg Device USiNg the eUler-lAgrANge ApproAch Clarissa Bergman Fonte,esss
FlUiD-StrUctUrAl ANAlYSiS iN circUlAr toWerSRenato Bertolino Junior, unesP
the ApplicAtioN Fo BeAM eleMeNtS to Solve coNtAct proBleMSMarcos Giovani Dropa de Bortoli, emBraCo
AeroDYNAMic iMproveMeNtS iN A AeroDeSigN cArrier BASeD AircrAFt USiNg ANSYS’ coMpUtAtioNAl FlUiD DYNAMicS toolSSinjin D. Machado Yano, Poli usP
coMpUtAtioNAl SiMUlAtioN oF the perForMANce oF A trANSoNic AXiAl-FloW coMpreSSorSu Jian, uFrJ
NUMericAl coUpliNg BetWeeN DeM (DiScret eleMeNt MethoD) AND FeA (FiNite eleMeNtS ANAlYSiS)Daniel Nasato, esss
17:40 MoDeliNg oF A DeMiSter Device For grAvitAtioNAl SepArAtor tANkS João Aguirre Oliveira Jr.,esss
A MethoDologY For A hYDroDYNAMic ANAlYSiS oF A MooNpool StrUctUre With MooriNg liNeS USiNg the ANSYS AqWA proDUctMaira Vargas, esss
ANSYS lS-DYNA pc MoDeliNg oF coNtAct/iMpAct With high AND loW StiFFNeSS MAteriAlS iN the NUMericAl SiMUlAtioN oF NUcleAr trANSportAtioN pAckAgeS UNDer 9 M Drop teStSMiguel Mattar Neto, iPen – Cnen/sP
cFD optiMizAtioN oN Fei SAe AeroDeSigN Victor Kanehiro Arume de Souza, Centro universitário da Fei
vAliDAteD NUMericAl ANAlYSiS oF A WAter ceNtriFUgAl pUMpEdson Luiz zaparoli, ita - instituto tecnologico de aeronautica
ADvANceD cFD poSt-proceSSiNg techNiqUeS USiNg eNSightDaniel Bruno de Vasconcelos, esss
8:00 ADVANCED TRAiNiNG TECHNiCAL TOPiCS
room Faial Corvo GraCiosa santa maria Cruzeiro do sul i Cruzeiro do sul iv
room GraCiosa Cruzeiro do sul i santa maria Corvo Faial Cruzeiro do sul iv
electromagnetic Analysis of electromechanicalproducts using Maxwell
ANSYS Mechanical Workbench - rotordynamics
ANSYS Mechanical - Advanced contact and Fasteners
ANSYS ApDl programming integrating Workbench and classic
pre AND poSt proceSSiNg
ANSYS MechANicAl i
9:50 REFRESHMENTS iN EXHiBiTiON AREA
PLENARY SESSiON
room PiCo
10:20 international Speaker ANSYS TECHNOLOGY UPDATEPaul Galpin, ANSYS, Inc.
11:20 Sponsor Srinivas Kodiyalam, SGI
11:40 technical Speaker POST PROCESSiNG AND ViSUALizATiON WiTH ENSiGHT - UPDATE ON ENSiGHT 9.1 AND AN iNTRODUCTiON TO ENSiGHT CFDMartin Faber, CEI
12:10 LUNCH
13:30 Management track iNNOVATiON AND DEVELOPMENT iN CAPiTAL GOODS PROJECTS FOR CONSTRUCTiONWalter Rauen de Souza, Ciber Equipamentos Rodoviários Ltda.
14:00 technical Speaker THE STRUCTURAL DESiGN OF NUCLEAR COMPONENTS – iPEN DESiGN BY ANALYSiS EXPERiENCE Miguel Mattar Neto, IPEN-CNEN/SP
14:30 technical Speaker ANSYS SOFTWARE USAGE iN TECHNiP EqUiPMENTS AND ACCESSORiES DEPARTMENTFernando Toste, Technip
15:00 international Speaker RECENT ADVANCES iN DiSCRETE ELEMENT MODELiNG SiMULATiONS USiNG EDEMSriram Ramanathan, DEM Solutions
15:30 REFRESHMENTS iN EXHiBiTiON AREA
TECHNiCAL SESSiONS
18:00 END OF 3RD DAY
Chairman
uu NOVEMBER 13
OiL & GAS iii
Karolline ropelato
OPTiMizATiON
rodrigo Ferraz
iNDUSTRiAL EqUiPMENTS iiimauricio Pacheco
AUTOMOTiVE
regis ataides
POWER GENERATiON iimartin Kessler
BiOTECHNOLOGY
Fernando amaral
10:20 MiNiMiziNg coke ForMAtioN iN A DiStillAtioN colUMN chiMNeY trAY BY cFD ANAlYSiSAlessandra Bastos dos Santos,PetroBras
iNterFAce to perForM DeSigN oF eXperiMeNtS (Doe) USiNg ANSYS e viSUAl BASicDiego Fernandes Rodrigues, instituto superior tupy
SAFer AND More DUrABle trANSFer chUteSMarcio zerwes, martin engineering
optiMizAtioN oF BlANkS USeD iN cooliNg coMpreSSor cover With ANSYS lS-DYNALeonardo Camilo dos Reis, usiminas
gAS FloW SiMUlAtioN iNSiDe A Deck oveNArturo Barrientos, universidad de Concepción
the StreSS DiStriBUtioN iNFlUeNce BY USiNg BoNe ceMeNt At FiXAtioN oF eNDo-oSSeUS FeMorAl SteM proStheSiSCarlos Rodrigo de Mello Roesler, uFsC
10:40 reMoviNg coke FiNeS FroM BottoM oF FrActioNAtor toWerS AND kNockoUt DrUM USiNg cFD Karolline Ropelato,esss
geNetic StrUctUrAl optiMizAtioN ApplieD With teNSioN, FleXiBilitY AND BUckliNg coNStrAiNtSRafael Sommer, tmsa
eDeM-ANSYS ApplicAtioNS For MiNiNg iNDUStrYMarcello Coelho Sousa, vale
ApplYiNg FeA to Solve A SUSpeNSioN trAiler proBleMDaniel Luis Boniatti , susPensYs
vAliDAtioN oF A qUick proceDUre to eStiMAte MeAN vAlUeS iN qUASi-perioDic FloWS: ApplicAtioN to heAt trANSFer iN piN-FiNNeD chANNelSPaulo L. da Cunha Lage, uFrJ
StreSS ANAlYSiS MoDelS oF hUMAN loNg BoNeS - ANAlYtic AND FiNite eleMeNt ApproAcheSivan Thesi Riagusoff, esss
11:00 cFD SiMUlAtioN oF MUltiphASe FloW iN A Sieve trAY oF A DiStillAtioN colUMN Joel Gustavo Teleken,uFsC
optiMizAtioN oF AN electricAl coke FUrNAce USiNg ANSYS cFX AND MoDeFroNtierRicardo Serfaty, PetroBras
colD BeNDiNg oF therMAllY iNSUlAteD pipeS: NUMericAl SiMUlAtioNS USiNg ANSYSFabiano Diesel, esss
cFD StUDY oF hvAc SYSteMGustavo Fonseca de Freitas Maia, Fiat
ANAlYSeS oF the gAS FloW iN the iNlet DUctS oF A DUSt collectiNg SYSteM. MoDeliNg, SiMUlAtioN, MeASUreMeNtS AND cASe StUDYRenata Favalli, enFil Controle ambiental
FAtigUe ANAlYSiS oF the coloSSo rc iMplANt - eMFilS®Marco André Argenta, uFPr
11:20 USiNg the coMpUtAtioNAl FlUiD DYNAMicS to chArActerize perMeAtioN MoDUleS USiNg MeMBrANeS Luzia Sergina de França Neta,uFrJ
ApplicAtioN oF MDo techNiqUeS USiNg MoDeFroNtier At eMBrAerJuliano Machado Tenorio Cavalcanti, emBraer
MAtheMAticAl MoDeliNg AND NUMericAl SiMUlAtioN oF the MUltiphASe FloW iN the MAiN troUgh oF A BlASt FUrNAceRicardo Rezende, uFsC
NUMericAl MoDeliNg oF the Shot-peeNiNg ApplieD to AUtoMotive SpriNgSMiguel Angel Calle Gonzales, Poli usP
therMo-FlUiD-DYNAMic ANAlYSiS iN pci lANceSMagno Antonio Calil Resende Silveira, usiminas
SiMUlAtioN oF the MechANicAl BehAvior oF BiocoMpAtiBle DeNtAl ceMeNt USiNg the ANSYSVanderson Deon, uFPr
11:40 cFD SiMUlAtioN oF A reFiNerY DoUBle-Fire FUrNAce Raphael Bacchi,esss
roUtiNe For trAckiNg MoDe oN AN optiMizAtioN proBleMJulio Cesar da Silva, emBraCo
DAMAge ANAlYSiS oF therMocoUple WellS iN Fcc riSerS USiNg cFDJairo zago de Souza, esss / PetroBras
cAvitAtioN eroSioN preDictioN iN hYDrAUlic vAlve José Roberto Clark Reis, BosCh
SeA WAter BiociDe releASe optiMizAtioN At ANgrA 2 NUcleAr poWer plANtRoberto Silva de Oliveira, eletronuclear s.a
StrUctUrAl optiMizAtioN oF crop DiviDer FloAtiNg/ctc MoDel to chopper SUgAr cANe hArveSterJorge L. Mangoline Neves, Centro de tecnologia Canavieira
12:00 FloW Meter ANAlYSiS USiNg cFDRicardo Carrera, PetroBras
A NeW MethoDologY oF optiMizAtioN AND NUMericAl SiMUlAtioN oF the FloW over tUrBiNe BlADeSAnna Paula de Sousa Parente Rodrigues, unB
MAtheMAticAl MoDelliNg oF gAS iNJectioN iN A coNtiNUoUS cAStiNg tUNDiShClovis R. Maliska, uFsC
WelDiNg proceSS ANAlYSiS ApplieD to BrAke chAMBer SUpport oF light DUtY vehicleS Giovanni M. Teixeira, esss
SiMUlAtioN oF hYDroDYNAMic ForceS thAt Act iN FiXeD Wheel gAteS USiNg coMpUtAtioNAl FlUiD DYNAMicSHarley Souza Alencar, alstom
pArAMeterS iDeNtiFicAtioN oN StreSS X StrAiN cUrve oF polYMeric MAteriAlS – SeNSiBilitY ANAlYSiSAntonio Carlos Guimarães, uFsC
12:20 CLOSiNG LUNCH
8:00 TECHNiCAL TOPiCS
ANSYS MechANicAl ii ANSYS FlUeNt ANSYS cFX electroNicS optiMizAtioN DiScrete eleMeNt MoDeliNg
9:50 REFRESHMENTS iN EXHiBiTiON AREA
TECHNiCAL SESSiONS
room GraCiosa santa maria Corvo Faial Flores i Flores ii
room GraCiosa Flores i santa maria Corvo Faial Flores ii
Chairman
2009 ESSS South American ANSYS Users Conference
Costão do Santinho Resort and SPA, which is surrounded by crystalline water, which laps upon the shores of the capital of Santa Catarina, is located to the far north of Florianópolis, on Santinho beach. Santinho is one of the most beautiful of all the 42 beaches on the island and is only 35 km (21 miles) from the center. Blessed by the beautiful natural surroundings, Florianópolis offers a fine reference to the quality of life and is synonymous for holidays, sun, fun and beautiful people.
The gastronomy in the six restaurants at Costão do Santinho Resort and SPA is a special attraction. The Resort offers a vast choice of culinary options and without a doubt the best restaurants on the island.
Special daily rate for the 2009 ESSS South American ANSYS Users Conference attendees:
• Single Room: R$ 291,00 + 6,15% (tax)• Double Room: R$ 444,00 + 6,15% (tax)
uu SPECiAL RATES
A limited number of rooms at reduced rates is being held for attendees at Costao do Santinho Resort. To secure a room, please contact Camila Cintra at América do Sol Tourism and Events.
América do Sol Tourism and Events Contato: [email protected] Telefone: + 55 (48) 3224-7707
uu RESERVATiON
Organization:information and Registration :http://www.esss.com.br/events/ansys2009+55 (48) 3953-0000 / (48) 3953-0056